-- =====================================================================
-- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
--
-- Description:
--    This MIB module is intended for management of Fibre Channel Zoning
--    Servers, including both Basic Zoning Management and Enhanced Zoning
--    Management.
-- Reference:
-- Version: V1.0
-- History:
--   V1.0 Initial version created by qiaoxinghua 2013-12-25
-- =====================================================================
HPN-ICF-FC-ZONE-SERVER-MIB DEFINITIONS ::= BEGIN

IMPORTS
    HpnicfFcNameId
        FROM HPN-ICF-FC-TC-MIB
    hpnicfSan, hpnicfVsanIndex
        FROM HPN-ICF-VSAN-MIB
    ifIndex, ifDescr
        FROM IF-MIB
    Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    RowStatus, TruthValue, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    t11ZsActiveZoneIndex, t11ZsActiveZoneMemberIndex
        FROM T11-FC-ZONE-SERVER-MIB;

hpnicfFcZoneServer MODULE-IDENTITY
    LAST-UPDATED "201312251507Z"        -- December 25, 2013 at 15:07 GMT
    ORGANIZATION
        ""
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB module is intended for management of FC(Fibre Channel)
         Zoning entities, including Basic Zoning Management and Enhanced
         Zoning Management."
    REVISION "201312251507Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { hpnicfSan 9 }

--
-- Textual conventions
--
HpnicfFcZsGenName ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS       current
    DESCRIPTION
        "Represents the general names for a Zone Set, Zone or Zone
         alias object.

         Each octet in this string is an ASCII code for an English
         letter, digit, or special character such as the dollar sign ($),
         minus sign (-), caret (^), or underscores (_).

         This string must contain at least one character and must start
         with an English letter."
    SYNTAX OCTET STRING (SIZE (1..255))

HpnicfFcZsGenNameOrZero ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS       current
    DESCRIPTION
        "Represents the general names for a Zone Set, Zone or Zone
         alias object.

         Each octet in this string is an ASCII code for an English
         letter, digit, or special character such as the dollar sign ($),
         minus sign (-), caret (^), or underscores (_).

         This string must start with an English letter."
    SYNTAX OCTET STRING (SIZE (0..255))

HpnicfFcZsZoneMemberType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Represents the addressing mechanism by
         which a member is identified:

        'fcid'            - FC ID of N_Port.
        'fwwn'            - WWN(World Wide Name) of F_Port.
        'pwwn'            - WWN(World Wide Name) of N_Port.
        'aliasName'       - Zone alias name.
        "
    SYNTAX INTEGER
    {
    fcid(1),
    fwwn(2),
    pwwn(3),
    aliasName(4)
    }

--
-- Node definitions
--
hpnicfFcZoneMibObjects OBJECT IDENTIFIER ::= { hpnicfFcZoneServer 1 }

hpnicfFcZsConfiguration OBJECT IDENTIFIER ::= { hpnicfFcZoneMibObjects 1 }

-- Zone Server Table
hpnicfFcZsServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table that contains information about the Zone Servers
         in each VSAN and provides the capability to perform
         operations on their Zone Server databases."
    ::= { hpnicfFcZsConfiguration 1 }

hpnicfFcZsServerEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry contains information specific to a Zone
         Server for a particular VSAN."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsServerTable 1 }


HpnicfFcZsServerEntry ::=
    SEQUENCE {
        hpnicfFcZsZoneModeCfg
            INTEGER,
        hpnicfFcZsHardZoneEnable
            TruthValue,
        hpnicfFcZsDistributeRule
            INTEGER,
        hpnicfFcZsDefaultZoneSetting
            INTEGER,
        hpnicfFcZsMergeControlSetting
            INTEGER,
        hpnicfFcZsServerLastResult
            INTEGER
     }

hpnicfFcZsZoneModeCfg OBJECT-TYPE
    SYNTAX INTEGER
        {
        basic(1),
        enhanced(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The operational mode of the Zone Server.

         Setting this object to 'enhanced' is a request to
         set the operational mode of the Zone Server to
         Enhanced mode.  This is possible only if all
         switches in the Fibre Channel Fabric are capable
         of working in Enhanced mode.

         Setting this object to 'basic' is a request to set
         the operational mode of the Zone Server to Basic
         mode."
    ::= { hpnicfFcZsServerEntry 1 }

hpnicfFcZsHardZoneEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object indicates whether this switch, no matter
         in Basic or Enhanced mode, enforces Hard Zoning in
         this VSAN."
    ::= { hpnicfFcZsServerEntry 2 }

hpnicfFcZsDistributeRule OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        activeOnly(2),
        full(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object specifies whether a complete distribution
         (or merge) will be applied when an activation(or merge)
         happened in Basic mode.

         If this object is set to 'full', both the Active
         Zone Set and Zone Set Database will be distributed
         (or merged) when an activation operation(or merge) is
         performed.

         If this object is set to 'activeOnly', only the
         Active Zone Set will be distributed(or merged) when
         an activation operation(or merge) is performed.

         The value 'none' is meaningless and can be used only
         in Enhanced mode."
    ::= { hpnicfFcZsServerEntry 3 }

hpnicfFcZsDefaultZoneSetting OBJECT-TYPE
    SYNTAX INTEGER
        {
        deny(1),
        permit(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object controls the Zoning flag that governs the
         behavior of the Default Zone in this VSAN.

         If this object is set to 'permit', the members of the
         Default Zone in this VSAN can communicate with each
         other.

         If this object is set to 'deny', the members of the
         Default Zone in this VSAN cannot communicate with each
         other."
    ::= { hpnicfFcZsServerEntry 4 }

hpnicfFcZsMergeControlSetting OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        allow(2),
        restrict(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object controls the Enhanced Zoning flag that
         indicates the Merge Control Setting for this VSAN.
         It is meaningful only in Enhanced mode:

         'none'     - This value is meaningless and only can be
                      used in Basic mode.
         'allow'    - A switch may join the Fabric only if
                      its Zoning Database is able to merge
                      with the Fabric's Zoning Database.
         'restrict' - A switch may join the Fabric only if
                      its Zoning Database is equal to the
                      Fabric's Zoning Database."
    ::= { hpnicfFcZsServerEntry 5 }

hpnicfFcZsServerLastResult OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        success(2),
        busy(3),
        noSupportInFabric(4),
        noSupportInBasic(5),
        noSupportInEnhanced(6),
        activeZoneSetTooBig(7),
        otherFault(8)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Current operational status of the latest configuration
         in this VSAN:

         'none'                - No corresponding operation has been performed
                                 yet.
         'success'             - The configuration was performed successfully.
         'busy'                - The configuration was performed unsuccessfully,
                                 because the system is busy with another zoning
                                 operation.
         'noSupportInFabric'   - The configuration was performed unsuccessfully,
                                 because one or more switches in this Fabric
                                 don't support Enhanced zoning.
         'noSupportInBasic'    - The configuration was performed unsuccessfully,
                                 because it is not supported in Basic mode.
         'noSupportInEnhanced' - The configuration was performed unsuccessfully,
                                 because it is not supported in Enhanced mode.
         'activeZoneSetTooBig' - The configuration was performed unsuccessfully,
                                 because the Active Zone Set is too large to be
                                 supported.
         'otherFault'          - The configuration was performed unsuccessfully
                                 for other reasons."
    ::= { hpnicfFcZsServerEntry 6 }

-- Zoneset Table
hpnicfFcZsZonesetTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsZonesetEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table that contains information about each Zone
         Set in the Zone Set Database of the Zone Servers
         in a specified VSAN."
    ::= { hpnicfFcZsConfiguration 2 }

hpnicfFcZsZonesetEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsZonesetEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry contains the information of a Zone Set configured
         in a specified VSAN."
    INDEX { hpnicfVsanIndex, hpnicfFcZsZonesetIndex }
    ::= { hpnicfFcZsZonesetTable 1 }


HpnicfFcZsZonesetEntry ::=
    SEQUENCE {
        hpnicfFcZsZonesetIndex
            Unsigned32,
        hpnicfFcZsZonesetName
            HpnicfFcZsGenName,
        hpnicfFcZsZonesetRowStatus
            RowStatus
     }

hpnicfFcZsZonesetIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of a Zone Set, which uniquely identifies a Zone Set in
         the Zone Set Database on local switch."
    ::= { hpnicfFcZsZonesetEntry 1 }

hpnicfFcZsZonesetName OBJECT-TYPE
    SYNTAX HpnicfFcZsGenName
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The name of this Zone Set, which should be unique
         within a VSAN.
         The Zone Set can be renamed by setting this object
         to a new value."
    ::= { hpnicfFcZsZonesetEntry 2 }

hpnicfFcZsZonesetRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row."
    ::= { hpnicfFcZsZonesetEntry 3 }

-- Zone Table
hpnicfFcZsZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains information about all the Zones
        in the Zone Set Database of the Zone Servers in each VSAN."
    ::= { hpnicfFcZsConfiguration 3 }

hpnicfFcZsZoneEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry contains information about a Zone
         in the Zone Set Database in a specified VSAN."
    INDEX { hpnicfVsanIndex, hpnicfFcZsZoneIndex }
    ::= { hpnicfFcZsZoneTable 1 }


HpnicfFcZsZoneEntry ::=
    SEQUENCE {
        hpnicfFcZsZoneIndex
            Unsigned32,
        hpnicfFcZsZoneName
            HpnicfFcZsGenName,
        hpnicfFcZsZonePairwiseEnable
            TruthValue,
        hpnicfFcZsZoneRowStatus
            RowStatus
     }

hpnicfFcZsZoneIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An index value that uniquely identifies this
         Zone in the Zone Set Database on local switch."
    ::= { hpnicfFcZsZoneEntry 1 }

hpnicfFcZsZoneName OBJECT-TYPE
    SYNTAX HpnicfFcZsGenName
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The name of this Zone, which should be unique
         within a VSAN.

         The Zone can be renamed by setting this object
         to a new value."
    ::= { hpnicfFcZsZoneEntry 2 }

hpnicfFcZsZonePairwiseEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object specifies whether Pairwise Zoning is enabled in this
         Zone.

         When Pairwise Zoning is enabled in a Zone, the behaviors of members
         in this Zone will be controlled through their roles.  The members
         with the same role ('initiator' or 'target') can't communicate with
         each other, but those with different roles or with the same role
         'both' can communicate with each other.

         When Pairwise Zoning is disabled in a Zone, the behaviors of members
         in this Zone will not be affected by their roles."
    DEFVAL { false }
    ::= { hpnicfFcZsZoneEntry 3 }

hpnicfFcZsZoneRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row."
    ::= { hpnicfFcZsZoneEntry 4 }

-- Set Zone Table
hpnicfFcZsSetZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsSetZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table specifies which Zone belongs to which Zone
         Set in the Zone Set Database of the Zone Servers."
    ::= { hpnicfFcZsConfiguration 4 }

hpnicfFcZsSetZoneEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsSetZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry specifies that a particular Zone is one of the Zones
         that form a particular Zone Set in the Zone Set database of a
         specified VSAN.

         When a row in this table exists, it references one row in
         the hpnicfFcZsZonesetTable and one row in the hpnicfFcZsZoneTable.
         The agent must ensure that both such rows when referenced by an
         active row in this table, do exist and have a status of
         'active'."
    INDEX { hpnicfVsanIndex,
            hpnicfFcZsZonesetIndex,
            hpnicfFcZsZoneIndex }
    ::= { hpnicfFcZsSetZoneTable 1 }


HpnicfFcZsSetZoneEntry ::=
    SEQUENCE {
        hpnicfFcZsSetZoneRowStatus
            RowStatus
     }

hpnicfFcZsSetZoneRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row."
    ::= { hpnicfFcZsSetZoneEntry 1 }

-- Zone alias Table
hpnicfFcZsZoneAliasTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsZoneAliasEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains information about the Zone aliases
         in the Zone Set Database of the Zone Server in each
         VSAN."
    ::= { hpnicfFcZsConfiguration 5 }

hpnicfFcZsZoneAliasEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsZoneAliasEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry contains information about a Zone alias in
         the Zone Set Database of a particular VSAN."
    INDEX { hpnicfVsanIndex, hpnicfFcZsZoneAliasIndex }
    ::= { hpnicfFcZsZoneAliasTable 1 }


HpnicfFcZsZoneAliasEntry ::=
    SEQUENCE {
        hpnicfFcZsZoneAliasIndex
            Unsigned32,
        hpnicfFcZsZoneAliasName
            HpnicfFcZsGenName,
        hpnicfFcZsZoneAliasRowStatus
            RowStatus
     }

hpnicfFcZsZoneAliasIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An index value that uniquely identifies this Zone
         alias within the Zone Set Database."
    ::= { hpnicfFcZsZoneAliasEntry 1 }

hpnicfFcZsZoneAliasName OBJECT-TYPE
    SYNTAX HpnicfFcZsGenName
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The name of this Zone alias, which should be unique
         within a VSAN.

         The Zone alias can be renamed by setting this object
         to a new value."
    ::= { hpnicfFcZsZoneAliasEntry 2 }

hpnicfFcZsZoneAliasRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row."
    ::= { hpnicfFcZsZoneAliasEntry 3 }

-- Zone Member Table
hpnicfFcZsZoneMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsZoneMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains all members of a Zone/Zone alias
         and information about those members in the Zone Set
         Database of the Zone Server in each VSAN."
    ::= { hpnicfFcZsConfiguration 6 }

hpnicfFcZsZoneMemberEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsZoneMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Each entry represents the relationship between a
         member and (one of) its 'parent(s)', i.e., a Zone
         or Zone alias the member belongs, within
         a particular VSAN."
    INDEX { hpnicfVsanIndex,
            hpnicfFcZsZoneMemberParentType,
            hpnicfFcZsZoneMemberParentIndex,
            hpnicfFcZsZoneMemberIndex }
    ::= { hpnicfFcZsZoneMemberTable 1 }


HpnicfFcZsZoneMemberEntry ::=
    SEQUENCE {
        hpnicfFcZsZoneMemberParentType
            INTEGER,
        hpnicfFcZsZoneMemberParentIndex
            Unsigned32,
        hpnicfFcZsZoneMemberIndex
            Unsigned32,
        hpnicfFcZsZoneMemberFormat
            HpnicfFcZsZoneMemberType,
        hpnicfFcZsZoneMemberIdentifier
            OCTET STRING,
        hpnicfFcZsZoneMemberPairwiseRole
            INTEGER,
        hpnicfFcZsZoneMemberRowStatus
            RowStatus
     }

hpnicfFcZsZoneMemberParentType OBJECT-TYPE
    SYNTAX INTEGER
        {
        zone(1),
        alias(2)
        }
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This object determines whether this member belongs
         to a Zone or Zone alias."
    ::= { hpnicfFcZsZoneMemberEntry 1 }

hpnicfFcZsZoneMemberParentIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This object contains the index value of the Zone or
         Zone alias to which this member belongs.

         If the value of the corresponding instance of
         hpnicfFcZsZoneMemberParentType is 'zone', this object
         will contain the value of the hpnicfFcZsZoneIndex object of
         the Zone to which this member belongs.

         If the value of the corresponding instance of
         hpnicfFcZsZoneMemberParentType is 'alias', this object
         will contain the value of the hpnicfFcZsAliasIndex object
         of the Zone alias to which this member belongs."
    ::= { hpnicfFcZsZoneMemberEntry 2 }

hpnicfFcZsZoneMemberIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An index value that uniquely identifies this Zone
         member among all Zone members in the Zone or Zone
         alias they belongs to."
    ::= { hpnicfFcZsZoneMemberEntry 3 }

hpnicfFcZsZoneMemberFormat OBJECT-TYPE
    SYNTAX HpnicfFcZsZoneMemberType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object identifies the format of the
         Zone/Zone alias member's identifier that is contained
         in hpnicfFcZsZoneMemberIdentifier.

         This object cannot be modified while the value of the
         hpnicfFcZsZoneMemberRowStatus object is 'active'."
    ::= { hpnicfFcZsZoneMemberEntry 4 }

hpnicfFcZsZoneMemberIdentifier OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (1..255))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object contains the Member Identifier of the
         Zone or Zone alias.  The interpretation of this object
         depends on the value of the corresponding instance
         of hpnicfFcZsZoneMemberFormat:

         - if hpnicfFcZsZoneMemberFormat is 'fcid', this object
           contains the 3-octet N_Port FC ID.

         - if hpnicfFcZsZoneMemberFormat is 'fwwn', this object
           contains an 8-octet F_Port WWN.

         - if hpnicfFcZsZoneMemberFormat is 'pwwn', this object
           contains an 8-octet N_Port WWN.

         - if hpnicfFcZsZoneMemberFormat is 'aliasName', this
           object contains the value of hpnicfFcZsZoneAliasName
           for some Zone alias in the same Zone Set Database.

         This object cannot be modified while the value of the
         hpnicfFcZsZoneMemberRowStatus object is 'active'."
    ::= { hpnicfFcZsZoneMemberEntry 5 }

hpnicfFcZsZoneMemberPairwiseRole OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        both(2),
        initiator(3),
        target(4)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object identifies the Pairwise role of the Zone/Zone alias
         member.

         If hpnicfFcZsZoneMemberFormat is 'aliasName', the value of this
         object can only be 'none'.
         If hpnicfFcZsZoneMemberFormat is not 'aliasName', the value of
         this object can't be 'none', and the default value is 'both'
         (including both 'initiator' and 'target' role).

         This object can be modified while the value of the
         hpnicfFcZsZoneMemberRowStatus object is 'active'.

         The Pairwise role of a port member takes effect only when the
         hpnicfFcZsZonePairwiseEnable of the Zone to which the port member
         belongs is set to 'true'."
    ::= { hpnicfFcZsZoneMemberEntry 6 }

hpnicfFcZsZoneMemberRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row."
    ::= { hpnicfFcZsZoneMemberEntry 7 }

hpnicfFcZsOperation OBJECT IDENTIFIER ::= { hpnicfFcZoneMibObjects 2 }

hpnicfFcZsActivateTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsActivateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table provides a mechanism to allow a Zone Set
         to be activated."
    ::= { hpnicfFcZsOperation 1 }

hpnicfFcZsActivateEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsActivateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains information of the activation about
         a Zone Set."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsActivateTable 1 }


HpnicfFcZsActivateEntry ::=
    SEQUENCE {
        hpnicfFcZsActivate
            HpnicfFcZsGenNameOrZero,
        hpnicfFcZsDeactivate
            INTEGER,
        hpnicfFcZsActivateResult
            INTEGER,
        hpnicfFcZsActivateFailReason
            INTEGER
     }

hpnicfFcZsActivate OBJECT-TYPE
    SYNTAX HpnicfFcZsGenNameOrZero
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name of the Zone Set that needs to be activated.  The value of this
         object when read is always zero-length."
    ::= { hpnicfFcZsActivateEntry 1 }

hpnicfFcZsDeactivate OBJECT-TYPE
    SYNTAX INTEGER
        {
        noOper(1),
        deactivate(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "A request to deactivate the currently active Zone Set.  The value of
         this object when read is always 'noOper'.

        'noOper'      - Specifies no operation.
        'deactivate'  - Specifies the deactivate operation."
    ::= { hpnicfFcZsActivateEntry 2 }

hpnicfFcZsActivateResult OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        inProgress(2),
        activateSuccess(3),
        activateFailure(4),
        deactivateSuccess(5),
        deactivateFailure(6)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "As a result of the most recent activation/deactivation.

        'none'               - No activation/deactivation invoked since the
                               last restart of the management system.
        'inProcess'          - Activation/deactivation is still in progress.
        'activateSuccess'    - Activation completed successfully.
        'activateFailure'    - Activation failed due to some reason.
        'deactivateSuccess'  - Deactivation completed successfully.
        'deactivateFailure'  - Deactivation failed due to some reason."
    ::= { hpnicfFcZsActivateEntry 3 }

hpnicfFcZsActivateFailReason OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        busy(2),
        activeZoneSetTooBig(3),
        noZoneSet(4),
        noMember(5)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The reason for the most recent failure of a Zone Set activation or
         deactivation.

         'none'                 - No activation/deactivation invoked or the
                                  result of activation/deactivation is success.
         'busy'                 - The management system is busy in some other
                                  process.
         'activeZoneSetTooBig'  - The Active Zone Set size in packet reached
                                  the maximum limit in Basic mode.
         'noZoneSet'            - No specified Zone Set found.
         'noMember'             - No port member found in the specified
                                  Zone Set."
    ::= { hpnicfFcZsActivateEntry 4 }

hpnicfFcZsDistributeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsDistributeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table provides an operational object to trigger a distribution
         for each existing VSAN."
    ::= { hpnicfFcZsOperation 2 }

hpnicfFcZsDistributeEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsDistributeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry provides an operational object to trigger a distribution
         for a specified VSAN."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsDistributeTable 1 }


HpnicfFcZsDistributeEntry ::=
    SEQUENCE {
        hpnicfFcZsDistribute
            INTEGER,
        hpnicfFcZsDistributeLastResult
            INTEGER,
        hpnicfFcZsDistributeReasonCode
            Unsigned32,
        hpnicfFcZsDistributeExplainCode
            Unsigned32
     }

hpnicfFcZsDistribute OBJECT-TYPE
    SYNTAX INTEGER
        {
        noOper(1),
        distribute(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Specifies the operation of triggering a distribution in this VSAN.

         'noOper'      - Specifies no operation.
         'distribute'  - Specifies the distribute operation."
    ::= { hpnicfFcZsDistributeEntry 1 }

hpnicfFcZsDistributeLastResult OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        success(2),
        inProgress(3),
        rejectFailure(4),
        otherFault(5)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies the result of triggering a distribution for VSAN.

        'none'          - No distribution invoked via the corresponding
                          instance of distribution.
        'success'       - Distribution completed successfully.
        'inProgress'    - Distribution is still in progress.
        'rejectFailure' - Distribution failed due to an SW_RJT.
        'otherFault'    - Distribution/commit failed for some other reason."
    ::= { hpnicfFcZsDistributeEntry 2 }

hpnicfFcZsDistributeReasonCode OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The reason code in the SW_RJT packet received in the most recent
         distribution.

         This object is meaningful only when the value of
         hpnicfFcZsDistributeLastResult is 'rejectFailure'."
    ::= { hpnicfFcZsDistributeEntry 3 }

hpnicfFcZsDistributeExplainCode OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object contains the corresponding reason code explanation for
         hpnicfFcZsDistributeReasonCode, and is meaningful only when the value
         of hpnicfFcZsDistributeLastResult is 'rejectFailure'."
    ::= { hpnicfFcZsDistributeEntry 4 }

hpnicfFcZsClearDatabaseTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsClearDatabaseEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table provides an operational object to clear
         the local Zone Set Database for each existing VSAN."
    ::= { hpnicfFcZsOperation 3 }

hpnicfFcZsClearDatabaseEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsClearDatabaseEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry provides an operational object to clear
         the local Zone Set Database for a specified VSAN."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsClearDatabaseTable 1 }


HpnicfFcZsClearDatabaseEntry ::=
    SEQUENCE {
        hpnicfFcZsClearDatabase
            INTEGER
     }

hpnicfFcZsClearDatabase OBJECT-TYPE
    SYNTAX INTEGER
        {
        noOper(1),
        clearDb(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Specify the operation of clearing local Zone Set Database in this VSAN.

         'noOper'    - Specifies no operation.
         'clearDb'   - Specifies clear operation."
    ::= { hpnicfFcZsClearDatabaseEntry 1 }

hpnicfFcZsClearPktStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsClearPktStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table provides an operational object to clear
         the statistics on packets for each existing VSAN."
    ::= { hpnicfFcZsOperation 4 }

hpnicfFcZsClearPktStatsEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsClearPktStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry provides an operational object to clear
         the statistics on packets for a specified VSAN."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsClearPktStatsTable 1 }


HpnicfFcZsClearPktStatsEntry ::=
    SEQUENCE {
        hpnicfFcZsClearPktStats
            INTEGER
     }

hpnicfFcZsClearPktStats OBJECT-TYPE
    SYNTAX INTEGER
        {
        noOper(1),
        clearStats(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Specify the operation of clearing the statistics on
        packets in this VSAN.

         'noOper'       - Specifies no operation.
         'clearStats'   - Specifies the clear operation."
    ::= { hpnicfFcZsClearPktStatsEntry 1 }

hpnicfFcZsClearAllPktStats OBJECT-TYPE
    SYNTAX INTEGER
        {
        noOper(1),
        clearStats(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "An operational object to clear the statistics on
        packets for all existing VSANs.

         'noOper'         - Specifies no operation.
         'clearStats'     - Specifies the clear operation."
    ::= { hpnicfFcZsOperation 5 }


hpnicfFcZsInformation OBJECT IDENTIFIER ::= { hpnicfFcZoneMibObjects 3 }

hpnicfFcZsActiveZoneTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsActiveZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains information about Active Zone
         in each existing VSAN."
    ::= { hpnicfFcZsInformation 1 }

hpnicfFcZsActiveZoneEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsActiveZoneEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains information about Active Zone
         in a specified VSAN."
    INDEX {  hpnicfVsanIndex,
             t11ZsActiveZoneIndex}
    ::= { hpnicfFcZsActiveZoneTable 1 }


HpnicfFcZsActiveZoneEntry ::=
    SEQUENCE {
        hpnicfFcZsActiveZonePairwiseEnable
            TruthValue
     }

hpnicfFcZsActiveZonePairwiseEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates whether Pairwise Zoning of an Active Zone is enabled."
    ::= { hpnicfFcZsActiveZoneEntry 1 }


hpnicfFcZsActiveMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsActiveMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains information about Active Zone members
         in each existing VSAN."
    ::= { hpnicfFcZsInformation 2 }

hpnicfFcZsActiveMemberEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsActiveMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains information about Active Zone members
         in a specified VSAN."
    INDEX {  hpnicfVsanIndex,
             t11ZsActiveZoneIndex,
             t11ZsActiveZoneMemberIndex  }
    ::= { hpnicfFcZsActiveMemberTable 1 }


HpnicfFcZsActiveMemberEntry ::=
    SEQUENCE {
        hpnicfFcZsActiveMemberPairwiseRole
            INTEGER
     }

hpnicfFcZsActiveMemberPairwiseRole OBJECT-TYPE
    SYNTAX INTEGER
        {
        both(1),
        initiator(2),
        target(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates which role the Active Zone member is playing."
    ::= { hpnicfFcZsActiveMemberEntry 1 }


hpnicfFcZsServerStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsServerStatusEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains the configuration and running state of
         each existing VSAN."
    ::= { hpnicfFcZsInformation 3 }

hpnicfFcZsServerStatusEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsServerStatusEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains the configuration and running state of
         a specified VSAN."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsServerStatusTable 1 }


HpnicfFcZsServerStatusEntry ::=
    SEQUENCE {
        hpnicfFcZsServerStatus
            INTEGER,
        hpnicfFcZsHardZoneStatus
            INTEGER,
        hpnicfFcZsAliasCount
            Unsigned32,
        hpnicfFcZsZoneCount
            Unsigned32,
        hpnicfFcZsZonesetCount
            Unsigned32
     }

hpnicfFcZsServerStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        free(1),
        distribute(2),
        merge(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current status of Zone Server.

        'free'        - The Zone Server is now free.
        'distribute'  - The Zone Server is now busy distributing.
        'merge'       - The Zone Server is now busy merging."
    ::= { hpnicfFcZsServerStatusEntry 1 }

hpnicfFcZsHardZoneStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        enable(1),
        adminDisable(2),
        noResourceDisable(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current status of Hard Zone Server.

        'enable'            - Hard Zone Server is enabled.
        'adminDisable'      - Hard Zone Server is disabled administratively.
        'noResourceDisable' - Hard Zone Server is disabled due to lack of
                              hardware resource."
    ::= { hpnicfFcZsServerStatusEntry 2 }

hpnicfFcZsAliasCount OBJECT-TYPE
    SYNTAX Unsigned32(0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Zone aliases that exist in the specified VSAN."
    ::= { hpnicfFcZsServerStatusEntry 3 }

hpnicfFcZsZoneCount OBJECT-TYPE
    SYNTAX Unsigned32(0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Zones that exist in the specified VSAN."
    ::= { hpnicfFcZsServerStatusEntry 4 }

hpnicfFcZsZonesetCount OBJECT-TYPE
    SYNTAX Unsigned32(0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Zone Sets that exist in the specified VSAN."
    ::= { hpnicfFcZsServerStatusEntry 5 }

hpnicfFcZsPktStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsPktStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Packet statistic table of Zone Servers."
    ::= { hpnicfFcZsInformation 4 }

hpnicfFcZsPktStatsEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsPktStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains the statistics on packets of
        Zone Servers."
    INDEX { hpnicfVsanIndex }
    ::= { hpnicfFcZsPktStatsTable 1 }


HpnicfFcZsPktStatsEntry ::=
    SEQUENCE {
        hpnicfFcZsPktInMergeReqCount
            Counter64,
        hpnicfFcZsPktOutMergeReqCount
            Counter64,
        hpnicfFcZsPktInMergeAccCount
            Counter64,
        hpnicfFcZsPktOutMergeAccCount
            Counter64,
        hpnicfFcZsPktInMergeRjtCount
            Counter64,
        hpnicfFcZsPktOutMergeRjtCount
            Counter64,
        hpnicfFcZsPktInChangeReqCount
            Counter64,
        hpnicfFcZsPktOutChangeReqCount
            Counter64,
        hpnicfFcZsPktInChangeAccCount
            Counter64,
        hpnicfFcZsPktOutChangeAccCount
            Counter64,
        hpnicfFcZsPktInChangeRjtCount
            Counter64,
        hpnicfFcZsPktOutChangeRjtCount
            Counter64
     }

hpnicfFcZsPktInMergeReqCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Request Frames received by local Zone
         Server from other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 1 }

hpnicfFcZsPktOutMergeReqCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Request Frames sent by local Zone Server
         to other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 2 }

hpnicfFcZsPktInMergeAccCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Accept Frames received by local Zone
         Server from other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 3 }

hpnicfFcZsPktOutMergeAccCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Accept Frames sent by local Zone Server
         to other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 4 }

hpnicfFcZsPktInMergeRjtCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Reject Frames received by local Zone
         Server from other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 5 }

hpnicfFcZsPktOutMergeRjtCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Merge Reject Frames sent by local Zone Server
         to other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 6 }

hpnicfFcZsPktInChangeReqCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of change requests received by local Zone
         Server from other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 7 }

hpnicfFcZsPktOutChangeReqCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of change requests sent by local Zone Server
         to other Zone Servers."
    ::= { hpnicfFcZsPktStatsEntry 8 }

hpnicfFcZsPktInChangeAccCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Accept messages received from other Zone Servers
         in response to change request sent by local Zone Server."
    ::= { hpnicfFcZsPktStatsEntry 9 }

hpnicfFcZsPktOutChangeAccCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Accept messages sent to other Zone Servers
         in response to change request received by local Zone Server."
    ::= { hpnicfFcZsPktStatsEntry 10 }

hpnicfFcZsPktInChangeRjtCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Reject messages received from other Zone Servers
         in response to change request sent by local Zone Server."
    ::= { hpnicfFcZsPktStatsEntry 11 }

hpnicfFcZsPktOutChangeRjtCount OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Reject messages sent to other Zone Servers
         in response to change request received by local Zone Server."
    ::= { hpnicfFcZsPktStatsEntry 12 }


hpnicfFcZsNextFreeIndexInfo OBJECT IDENTIFIER ::= { hpnicfFcZsInformation 5 }

hpnicfFcZsZonesetNextFreeIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies the latest available index of hpnicfFcZsZonesetIndex that
         can be used to identify a new Zone Set."
    ::= { hpnicfFcZsNextFreeIndexInfo 1 }

hpnicfFcZsZoneNextFreeIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies the latest available index of hpnicfFcZsZoneIndex that
         can be used to identify a new Zone."
    ::= { hpnicfFcZsNextFreeIndexInfo 2 }

hpnicfFcZsZoneAliasNextFreeIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies the latest available index of hpnicfFcZsZoneAliasIndex that
         can be used to identify a new Zone alias."
    ::= { hpnicfFcZsNextFreeIndexInfo 3 }

hpnicfFcZsZoneMemberNextFreeIndexTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfFcZsZoneMemberNextFreeIndexEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains the information of the latest available index that
         can be used to identify a new member in each Zone or Zone alias."
    ::= { hpnicfFcZsNextFreeIndexInfo 4 }

hpnicfFcZsZoneMemberNextFreeIndexEntry OBJECT-TYPE
    SYNTAX HpnicfFcZsZoneMemberNextFreeIndexEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry contains the information of the latest available index that
         can be used to identify a new member in a Zone or Zone alias."
    INDEX { hpnicfFcZsZoneMemberParentType,
            hpnicfFcZsZoneMemberParentIndex }
    ::= { hpnicfFcZsZoneMemberNextFreeIndexTable 1 }

HpnicfFcZsZoneMemberNextFreeIndexEntry ::=
    SEQUENCE {
              hpnicfFcZsZoneMemberNextFreeIndex
              Unsigned32
             }

hpnicfFcZsZoneMemberNextFreeIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies the latest available index of hpnicfFcZsZoneMemberIndex that
         can be used to identify a new member in a Zone or Zone alias."
    ::= { hpnicfFcZsZoneMemberNextFreeIndexEntry 1 }


hpnicfFcZsNotification OBJECT IDENTIFIER ::= { hpnicfFcZoneMibObjects 4 }

hpnicfFcZsNotificationPrefix OBJECT IDENTIFIER ::= { hpnicfFcZsNotification 0 }

hpnicfFcZsDefaultZoneChangedNotify NOTIFICATION-TYPE
    OBJECTS { hpnicfVsanIndex,
              hpnicfFcZsLocalSwitchWWN,
              hpnicfFcZsDefaultZoneSetting }
    STATUS current
    DESCRIPTION
        "A hpnicfFcZsDefaultZoneChangedNotify notification is sent when
         the Default Zone setting of a specified VSAN is changed."
    ::= { hpnicfFcZsNotificationPrefix 1 }

hpnicfFcZsHardZoneChangedNotify NOTIFICATION-TYPE
    OBJECTS { hpnicfVsanIndex,
              hpnicfFcZsLocalSwitchWWN,
              hpnicfFcZsHardZoneStatus }
    STATUS current
    DESCRIPTION
        "A hpnicfFcZsHardZoneChangedNotify notification is sent when
         the hard Zone configuration of a specified VSAN is changed."
    ::= { hpnicfFcZsNotificationPrefix 2 }

hpnicfFcZsMergeFailedNotify NOTIFICATION-TYPE
    OBJECTS { ifIndex,
              ifDescr,
              hpnicfVsanIndex,
              hpnicfFcZsLocalSwitchWWN,
              hpnicfFcZsPeerSwitchWWN,
              hpnicfFcZsMergeFailCause
            }
    STATUS current
    DESCRIPTION
        "A hpnicfFcZsMergeFailedNotify notification is sent when a Zone merge
         failure occurs."
    ::= { hpnicfFcZsNotificationPrefix 3 }

hpnicfFcZsMergeSucceededNotify NOTIFICATION-TYPE
    OBJECTS { ifIndex,
              ifDescr,
              hpnicfVsanIndex,
              hpnicfFcZsLocalSwitchWWN,
              hpnicfFcZsPeerSwitchWWN
            }
    STATUS current
    DESCRIPTION
        "A hpnicfFcZsMergeSucceededNotify notification is sent when a successful
         Zone merge occurs."
    ::= { hpnicfFcZsNotificationPrefix 4 }

hpnicfFcZsActivationCompletedNotify NOTIFICATION-TYPE
    OBJECTS { hpnicfVsanIndex,
              hpnicfFcZsLocalSwitchWWN,
              hpnicfFcZsActivateResult
            }
    STATUS current
    DESCRIPTION
        "A hpnicfFcZsActivationCompletedNotify notification is sent whenever a
         activation/deactivation is completed."
    ::= { hpnicfFcZsNotificationPrefix 5 }

hpnicfFcZsNotificationSwitch OBJECT IDENTIFIER ::= { hpnicfFcZsNotification 1 }

hpnicfFcZsDefaultZoneChangedEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates whether the module will generate
         traps for Default Zone setting change events."
    ::= { hpnicfFcZsNotificationSwitch 1 }

hpnicfFcZsHardZoneChangedEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates whether the module will generate
         traps for hard Zone change events."
    ::= { hpnicfFcZsNotificationSwitch 2 }

hpnicfFcZsMergeFailedEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates whether the module will generate
         traps for Zone merge failure events."
    ::= { hpnicfFcZsNotificationSwitch 3 }

hpnicfFcZsMergeSucceededEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates whether the module will generate
         traps for Zone merge success events."
    ::= { hpnicfFcZsNotificationSwitch 4 }

hpnicfFcZsActivationCompletedEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates whether the module will generate
         traps for activation/deactivation-completed events."
    ::= { hpnicfFcZsNotificationSwitch 5 }

hpnicfFcZsObjsForNotification OBJECT IDENTIFIER ::= { hpnicfFcZsNotification 2 }

hpnicfFcZsLocalSwitchWWN OBJECT-TYPE
    SYNTAX HpnicfFcNameId
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "This object indicates the WWN of the local switch."
    ::= { hpnicfFcZsObjsForNotification 1 }

hpnicfFcZsPeerSwitchWWN OBJECT-TYPE
    SYNTAX HpnicfFcNameId
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "This object indicates the WWN of the peer switch."
    ::= { hpnicfFcZsObjsForNotification 2 }

hpnicfFcZsMergeFailCause OBJECT-TYPE
    SYNTAX INTEGER
        {
        zoneModeInconsistent(1),
        zonePolicyNotEqual(2),
        hardZoneInconsistent(3),
        dataNotEqualInRestrict(4),
        activeZoneSetMergeFailed(5),
        zoneMergeDataTooBig(6),
        zoningObjectNumberTooBig(7),
        zoneDbMergeFaildInBasic(8),
        zoneDbMergeFaildInEnhanced(9),
        other(10)
        }
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Indicates the reason of a Zone merge failure.

         'zoneModeInconsistent'        - The zone mode is inconsistent.
         'zonePolicyNotEqual'          - Zone Merge-Control setting or
                                         Default-Zone doesn't match.
         'hardZoneInconsistent'        - The Hard Zone Attribute is
                                         inconsistent.
         'dataNotEqualInRestrict'      - The Merge-Control setting is
                                         Restrict and the peer zoning
                                         database is not equal.
         'activeZoneSetMergeFailed'    - The Active Zone Set merge failed.
         'zoneMergeDataTooBig'         - The merged packet was
                                         too large.
         'zoningObjectNumberTooBig'    - The number of zoning objects exceeded
                                         the limit.
         'zoneDbMergeFaildInBasic'     - The database merge failed in Basic
                                         mode.
         'zoneDbMergeFaildInEnhanced'  - The database merge failed in Enhanced
                                         mode.
         'other'                       - Unknown reason."
    ::= { hpnicfFcZsObjsForNotification 3 }

END