-- ===================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: DHCP Relay MIB. -- Reference: -- Version: V1.1 -- History: -- V1.0 2005-4-11 created by wumingyu -- V1.1 2006-01-10 modified by xuyufei -- Add hpnicfDHCPRConfigOption82IfTable -- ===================================================================== HPN-ICF-DHCPRELAY-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, RowStatus, MacAddress FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI ifIndex FROM RFC1213-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB hpnicfCommon FROM HPN-ICF-OID-MIB; -- ================================================================== -- -- module identity part -- -- ================================================================== hpnicfDhcpRelay MODULE-IDENTITY LAST-UPDATED "200506080000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "DHCPR MIB" REVISION "200506080000Z" DESCRIPTION "The initial version of this MIB module." ::= { hpnicfCommon 58 } -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== hpnicfDHCPRMibObject OBJECT IDENTIFIER ::= { hpnicfDhcpRelay 1 } --hpnicfDHCPRIfSelectTable-- hpnicfDHCPRIfSelectTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring relay mode for interfaces. " ::= { hpnicfDHCPRMibObject 1 } hpnicfDHCPRIfSelectEntry OBJECT-TYPE SYNTAX HpnicfDHCPRIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring relay mode for an interface. " INDEX { ifIndex } ::= { hpnicfDHCPRIfSelectTable 1 } HpnicfDHCPRIfSelectEntry ::= SEQUENCE { hpnicfDHCPRIfSelectRelayMode INTEGER } hpnicfDHCPRIfSelectRelayMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the value is on, the DHCP relay function would be enabled on this interface. " DEFVAL { off } ::= { hpnicfDHCPRIfSelectEntry 1 } --hpnicfDHCPRIpToGroupTable-- hpnicfDHCPRIpToGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring ip addresses for DHCP server groups. " ::= { hpnicfDHCPRMibObject 2 } hpnicfDHCPRIpToGroupEntry OBJECT-TYPE SYNTAX HpnicfDHCPRIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring ip addresses for a DHCP server group. " INDEX { hpnicfDHCPRIpToGroupGroupId, hpnicfDHCPRIpToGroupServerIpType, hpnicfDHCPRIpToGroupServerIp } ::= { hpnicfDHCPRIpToGroupTable 1 } HpnicfDHCPRIpToGroupEntry ::= SEQUENCE { hpnicfDHCPRIpToGroupGroupId Integer32, hpnicfDHCPRIpToGroupServerIpType InetAddressType, hpnicfDHCPRIpToGroupServerIp InetAddress, hpnicfDHCPRIpToGroupRowStatus RowStatus } hpnicfDHCPRIpToGroupGroupId OBJECT-TYPE SYNTAX Integer32 (0..19) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group identifier of DHCP server group. " ::= { hpnicfDHCPRIpToGroupEntry 1 } hpnicfDHCPRIpToGroupServerIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip address type of DHCP server. " ::= { hpnicfDHCPRIpToGroupEntry 2 } hpnicfDHCPRIpToGroupServerIp OBJECT-TYPE SYNTAX InetAddress (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip address of DHCP server. " ::= { hpnicfDHCPRIpToGroupEntry 3 } hpnicfDHCPRIpToGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry. Three actions are used: active, createAndGo, destroy. " ::= { hpnicfDHCPRIpToGroupEntry 4 } --hpnicfDHCPRIfToGroupTable-- hpnicfDHCPRIfToGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRIfToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring DHCP server groups for interfaces. " ::= { hpnicfDHCPRMibObject 3 } hpnicfDHCPRIfToGroupEntry OBJECT-TYPE SYNTAX HpnicfDHCPRIfToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring DHCP server group for an interface. " INDEX { ifIndex } ::= { hpnicfDHCPRIfToGroupTable 1 } HpnicfDHCPRIfToGroupEntry ::= SEQUENCE { hpnicfDHCPRIfToGroupGroupId Integer32, hpnicfDHCPRIfToGroupRowStatus RowStatus } hpnicfDHCPRIfToGroupGroupId OBJECT-TYPE SYNTAX Integer32 (0..19) MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP server group for this interface. " ::= { hpnicfDHCPRIfToGroupEntry 1 } hpnicfDHCPRIfToGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry. Three actions are used: active, createAndGo, destroy" ::= { hpnicfDHCPRIfToGroupEntry 2 } --hpnicfDHCPRAddrCheckTable-- hpnicfDHCPRAddrCheckTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRAddrCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the states of dhcp security address check switchs for interfaces. " ::= { hpnicfDHCPRMibObject 4 } hpnicfDHCPRAddrCheckEntry OBJECT-TYPE SYNTAX HpnicfDHCPRAddrCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the state of dhcp security address check switch for an interface. " INDEX { ifIndex } ::= { hpnicfDHCPRAddrCheckTable 1 } HpnicfDHCPRAddrCheckEntry ::= SEQUENCE { hpnicfDHCPRAddrCheckSwitch INTEGER } hpnicfDHCPRAddrCheckSwitch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled. " DEFVAL { disabled } ::= { hpnicfDHCPRAddrCheckEntry 1 } --hpnicfDHCPRSecurityTable-- hpnicfDHCPRSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information of DHCP security. " ::= { hpnicfDHCPRMibObject 5 } hpnicfDHCPRSecurityEntry OBJECT-TYPE SYNTAX HpnicfDHCPRSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the information of DHCP security. " INDEX { hpnicfDHCPRSecurityClientIpAddrType, hpnicfDHCPRSecurityClientIpAddr } ::= { hpnicfDHCPRSecurityTable 1 } HpnicfDHCPRSecurityEntry ::= SEQUENCE { hpnicfDHCPRSecurityClientIpAddrType InetAddressType, hpnicfDHCPRSecurityClientIpAddr InetAddress, hpnicfDHCPRSecurityClientMacAddr MacAddress, hpnicfDHCPRSecurityClientProperty INTEGER, hpnicfDHCPRSecurityClientRowStatus RowStatus } hpnicfDHCPRSecurityClientIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP client's net ip address type" ::= { hpnicfDHCPRSecurityEntry 1 } hpnicfDHCPRSecurityClientIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP client's net ip address" ::= { hpnicfDHCPRSecurityEntry 2 } hpnicfDHCPRSecurityClientMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP client's mac address" ::= { hpnicfDHCPRSecurityEntry 3 } hpnicfDHCPRSecurityClientProperty OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Property of client address" ::= { hpnicfDHCPRSecurityEntry 4 } hpnicfDHCPRSecurityClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry. Three actions are used: active, createAndGo, destroy" ::= { hpnicfDHCPRSecurityEntry 5 } --hpnicfDHCPRStatisticsGroup-- hpnicfDHCPRStatisticsGroup OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 6 } hpnicfDHCPRRxClientPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCP clients by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 1 } hpnicfDHCPRTxClientPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the brodcast packets transmitted to DHCP clients by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 2 } hpnicfDHCPRRxServerPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCP Servers by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 3 } hpnicfDHCPRTxServerPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets transmitted to DHCP Servers by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 4 } hpnicfDHCPRDiscoverPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Discover packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 5 } hpnicfDHCPRRequestPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Request packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 6 } hpnicfDHCPRDeclinePktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Decline packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 7 } hpnicfDHCPRReleasePktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Release packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 8 } hpnicfDHCPRInformPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Inform packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 9 } hpnicfDHCPROfferPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Offer packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 10 } hpnicfDHCPRAckPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Ack packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 11 } hpnicfDHCPRNakPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Nak packets handled by DHCP relay. " ::= { hpnicfDHCPRStatisticsGroup 12 } hpnicfDHCPRStatisticsReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the packet statistics. " ::= { hpnicfDHCPRStatisticsGroup 13 } --hpnicfDHCPRCycleGroup-- hpnicfDHCPRCycleGroup OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 7 } hpnicfDHCPRCycleStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the value is on, the cycle function would be enabled. " DEFVAL { off } ::= { hpnicfDHCPRCycleGroup 1 } --hpnicfDHCPRConfigOption82Group-- hpnicfDHCPRConfigOption82Group OBJECT IDENTIFIER ::= { hpnicfDHCPRMibObject 8 } hpnicfDHCPROption82Switch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the value is enabled, DHCP relay supporting option 82 function would be enabled. " DEFVAL { disabled } ::= { hpnicfDHCPRConfigOption82Group 1 } hpnicfDHCPROption82HandleStrategy OBJECT-TYPE SYNTAX INTEGER { drop(1), keep(2), replace(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. " DEFVAL { replace } ::= { hpnicfDHCPRConfigOption82Group 2 } hpnicfDHCPRConfigOption82IfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDHCPRConfigOption82IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information of DHCP option 82. This table depends on hpnicfDHCPRIfToGroupTable. An entry of this table will be created when an entry of hpnicfDHCPRIfToGroupTable is created. " ::= { hpnicfDHCPRConfigOption82Group 3 } hpnicfDHCPRConfigOption82IfEntry OBJECT-TYPE SYNTAX HpnicfDHCPRConfigOption82IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the information of DHCP option 82. " INDEX { ifIndex } ::= { hpnicfDHCPRConfigOption82IfTable 1 } HpnicfDHCPRConfigOption82IfEntry ::= SEQUENCE { hpnicfDHCPROption82IfSwitch INTEGER, hpnicfDHCPROption82IfStrategy INTEGER, hpnicfDHCPROption82IfFormat INTEGER, hpnicfDHCPROption82IfNodeType INTEGER, hpnicfDHCPROption82IfUsrDefString OCTET STRING } hpnicfDHCPROption82IfSwitch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'. " DEFVAL { disabled } ::= { hpnicfDHCPRConfigOption82IfEntry 1 } hpnicfDHCPROption82IfStrategy OBJECT-TYPE SYNTAX INTEGER { drop(1), keep(2), replace(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. " DEFVAL { replace } ::= { hpnicfDHCPRConfigOption82IfEntry 2 } hpnicfDHCPROption82IfFormat OBJECT-TYPE SYNTAX INTEGER { normal(1), verbose(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format. " DEFVAL { normal } ::= { hpnicfDHCPRConfigOption82IfEntry 3 } hpnicfDHCPROption82IfNodeType OBJECT-TYPE SYNTAX INTEGER { invalid(1), mac(2), sysname(3), userdefine(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of hpnicfDHCPROption82IfFormat is set with 'verbose'. If the value of hpnicfDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of hpnicfDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of hpnicfDHCPROption82IfUsrDefString must be set simultaneously. " DEFVAL { invalid } ::= { hpnicfDHCPRConfigOption82IfEntry 4 } hpnicfDHCPROption82IfUsrDefString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string defined by user to fill in the option 82 verbose format. If the value of hpnicfDHCPROption82IfFormat is 'normal', or the value of hpnicfDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of hpnicfDHCPROption82IfNodeType is set with 'userdefine'. " ::= { hpnicfDHCPRConfigOption82IfEntry 5 } END