-- ================================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description:configuration management mib -- Reference: -- Version: V2.5 -- History: -- Initial version 2002-12-20 -- V1.1 24th Feb 2004 -- Imported module from HPN-ICF-OID-MIB,the root MIB. -- V1.2 14th May 2004 -- Changed MIB object name from hpnicfXXX to hpnicf, etc. -- V1.3 18th Aug 2004 -- Modified DESCRIPTION of 'hpnicfCfgLogFile' by jinyi. -- V1.4 16th Sept 2004 -- Modified DESCRIPTION of 'hpnicfCfgLogTerminalType' and 'hpnicfCfgLogTerminalNum' by wangyingxia -- V1.5 9th Oct 2004 -- Modified DESCRIPTION of 'hpnicfCfgRunModifiedLast' and 'hpnicfCfgManEventlog' by wangrui -- V1.6 30th Nov 2004 -- Modified DESCRIPTION of 'hpnicfCfgOperateCompletion' by wangrui -- V1.7 11th Jan 2005 -- Modified DESCRIPTION by gaolong and weixinzhe -- V1.8 26th Apr 2005 -- Added hpnicfCfgExecuteOperate and added ConfigOperationStateType by wangrui -- Modified DESCRIPTION of 'hpnicfCfgLogSrcData', 'hpnicfCfgLogDesData' and 'hpnicfCfgLogTerminalType' by fuzhenyu -- V1.9 6th Jun 2005 -- Added enum value in SYNTAX of hpnicfCfgOperateProtocol by jinyongfeng. -- V2.0 27th sept 2005 -- Modified DESCRIPTION of 'hpnicfCfgLogSrcCmd', 'hpnicfCfgRunModifiedLast' and 'hpnicfCfgLogDesData' by lisongfeng and wangrui -- V2.1 2009-05-05 Added hpnicfCfgOperateServerPort, hpnicfCfgInvalidConfigFile by jinyi -- V2.2 2009-12-20 Added hpnicfCfgOperFailReason, hpnicfCfgReset by shuaixiaojuan -- V2.3 2010-10-30 Deprecated hpnicfCfgOperateServerAddress, hpnicfCfgLogCmdSrcAddress -- and hpnicfCfgLogServerAddress, -- added enum in ConfigOperationStateType, -- added hpnicfCfgOperateSrvAddrType, hpnicfCfgOperateSrvAddrRev and -- hpnicfCfgOperateSrvVPNName, hpnicfCfgLogCmdSrcAddrType, -- hpnicfCfgLogCmdSrcAddrRev, hpnicfCfgLogCmdSrcAddrVPNName, -- hpnicfCfgLogServerAddrType,hpnicfCfgLogServerAddrRev, hpnicfCfgLogServerAddrVPNName by songhao. -- V2.4 2011-11-26 Added hpnicfCfgFirstTrapTime by duyanbing 04404. -- V2.5 2013-09-13 Added hpnicfCfgReset2 by duyanbing 04404. -- 2014-01-17 Modified description of hpnicfCfgLogCmdSrcAddress, hpnicfCfgLogServerAddress -- and hpnicfCfgOperateServerAddress. -- ================================================================= HPN-ICF-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN IMPORTS hpnicfCommon FROM HPN-ICF-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; hpnicfConfig MODULE-IDENTITY LAST-UPDATED "201111260000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB." REVISION "201111260000Z" DESCRIPTION "Initial revision of this MIB module." ::= { hpnicfCommon 4 } -- -- Textual conventions -- ConfigOperationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1): Update the saved configuration (startup) file used currently with the current configuration running in the system. This operation is equivalent to the [save] command from command line. If current startup configuration file does not exist, then the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Running(2): Update the current configuration running in the system with the saved configuration (startup) file used currently. The commands in the file are executed as if they had been entered via the command line. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). running2Net(3): Send the current configuration running in the system to the network using the specified file transfer protocol. net2Running(4): Update the current configuration running in the system with a remote file from the network using the specified file transfer protocol. The commands in the file are executed as if they had been entered via the command line. net2Startup(5): Download a remote file to the local system using the specified file transfer protocol and replace the saved configuration (startup) file used currently. If current startup configurationfile does not exist, the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Net(6): Send the saved configuration (startup) file used currently to the network using the specified file transfer protocol. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). " SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } ConfigOperationStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the specified operation. opInProgress : Specified operation is active. opOperationSuccess : Specified operation is supported and completed successfully. opInvalidOperation : Command invalid or command/protocol/device combination unsupported. opInvalidProtocol : Invalid protocol specified. opInvalidSourceName : Invalid source file name specified. opInvalidDestName : Invalid target name specified. opInvalidServerAddress : Invalid server address specified. opDeviceBusy : Specified device is in use and locked by another process. opDeviceOpenError : Invalid device name. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file name; file not found in partition. opFileTransferError : File transfer was unsuccessful; network failure. opFileChecksumError : File checksum in Flash failed. opNoMemory : System running low on memory. opAuthFail: Invalid user name or password. opTimeOut : File transfer was timeout. opUnknownFailure : Failure unknown. opInvalidConfigFile: Invalid configration file. opSlaveFull : Operation is fail for the slave don't have enough space. opCopyToSlaveFailure : Operation is fail when copy file to the slave. " SYNTAX INTEGER { opInProgress(1), opSuccess(2), opInvalidOperation(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeOut(18), opUnknownFailure(19), opInvalidConfigFile(20), opSlaveFull(21), opCopyToSlaveFailure(22) } -- -- Node definitions -- hpnicfConfigManObjects OBJECT IDENTIFIER ::= { hpnicfConfig 1 } hpnicfCfgLog OBJECT IDENTIFIER ::= { hpnicfConfigManObjects 1 } hpnicfCfgRunModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after system detects the current configuration has been changed." ::= { hpnicfCfgLog 1 } hpnicfCfgRunSavedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hpnicfCfgRunModifiedLast, the current configuration has been modified but not saved." ::= { hpnicfCfgLog 2 } hpnicfCfgStartModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been modified by a save of the current configuration running in the system or other methods such as copy." ::= { hpnicfCfgLog 3 } hpnicfCfgLogLimitedEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The object shows the maximum number of rows in hpnicfCfgLogTable. The value supported by the system is 10. " ::= { hpnicfCfgLog 4 } hpnicfCfgLogDeletedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of rows deleted from hpnicfCfgLogTable." ::= { hpnicfCfgLog 5 } hpnicfCfgLogWantBackup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Decide whether to backup the value of objects about hpnicfCfgLog." DEFVAL { true } ::= { hpnicfCfgLog 6 } -- If the value is true, the data of configuration log on the master will send to -- slave. Otherwise the data of log will be lost when master switches to -- slave. hpnicfCfgLogTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for logging configuration operation in device." ::= { hpnicfCfgLog 7 } hpnicfCfgLogEntry OBJECT-TYPE SYNTAX HpnicfCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information of the entry." INDEX { hpnicfCfgLogIndex } ::= { hpnicfCfgLogTable 1 } HpnicfCfgLogEntry ::= SEQUENCE { hpnicfCfgLogIndex Integer32, hpnicfCfgLogTime TimeTicks, hpnicfCfgLogSrcCmd INTEGER, hpnicfCfgLogSrcData INTEGER, hpnicfCfgLogDesData INTEGER, hpnicfCfgLogTerminalType INTEGER, hpnicfCfgLogTerminalUser DisplayString, hpnicfCfgLogTerminalNum Integer32, hpnicfCfgLogTerminalLocation DisplayString, hpnicfCfgLogCmdSrcAddress IpAddress, hpnicfCfgLogVirHost DisplayString, hpnicfCfgLogUserName DisplayString, hpnicfCfgLogServerAddress IpAddress, hpnicfCfgLogFile DisplayString, hpnicfCfgLogCmdSrcAddrType InetAddressType, hpnicfCfgLogCmdSrcAddrRev InetAddress, hpnicfCfgLogCmdSrcAddrVPNName DisplayString, hpnicfCfgLogServerAddrType InetAddressType, hpnicfCfgLogServerAddrRev InetAddress, hpnicfCfgLogServerAddrVPNName DisplayString } hpnicfCfgLogIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table beginning from 1." ::= { hpnicfCfgLogEntry 1 } hpnicfCfgLogTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the sysUpTime when the config log was generated." ::= { hpnicfCfgLogEntry 2 } hpnicfCfgLogSrcCmd OBJECT-TYPE SYNTAX INTEGER { cmdLine(1), snmp(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the source command which brought the log. Currently we provide the types of source: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by snmp. 3.other(3):configure log instigated by other source unknown." ::= { hpnicfCfgLogEntry 3 } hpnicfCfgLogSrcData OBJECT-TYPE SYNTAX INTEGER { erase(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line " ::= { hpnicfCfgLogEntry 4 } hpnicfCfgLogDesData OBJECT-TYPE SYNTAX INTEGER { unknown(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line" ::= { hpnicfCfgLogEntry 5 } hpnicfCfgLogTerminalType OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal type. If hpnicfCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as telnet. auxiliary(6): auxiliary interface." ::= { hpnicfCfgLogEntry 6 } hpnicfCfgLogTerminalUser OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string." ::= { hpnicfCfgLogEntry 7 } hpnicfCfgLogTerminalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal number. If hpnicfCfgLogSrcCmd is not 'cmdLine', use '-1'" ::= { hpnicfCfgLogEntry 8 } hpnicfCfgLogTerminalLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The location of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string." ::= { hpnicfCfgLogEntry 9 } hpnicfCfgLogCmdSrcAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by hpnicfCfgLogCmdSrcAddrRev for it only support IPv4." ::= { hpnicfCfgLogEntry 10 } hpnicfCfgLogVirHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The host name of remote system connected if hpnicfCfgLogTerminalType has the value of 'virtual'. Other, a zero length string." ::= { hpnicfCfgLogEntry 11 } hpnicfCfgLogUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user name used when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a zero length string." ::= { hpnicfCfgLogEntry 12 } hpnicfCfgLogServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by hpnicfCfgLogServerAddrRev for it only support IPv4." ::= { hpnicfCfgLogEntry 13 } hpnicfCfgLogFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current configuration file name when hpnicfCfgLogSrcData has the value of 'netFtp',and hpnicfCfgLogDesData has the value of 'startupData'. Other, a zero length string." ::= { hpnicfCfgLogEntry 14 } hpnicfCfgLogCmdSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address for the hpnicfCfgLogCmdSrcAddrRev." ::= { hpnicfCfgLogEntry 15 } hpnicfCfgLogCmdSrcAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0." ::= { hpnicfCfgLogEntry 16 } hpnicfCfgLogCmdSrcAddrVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { hpnicfCfgLogEntry 17 } hpnicfCfgLogServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address for the hpnicfCfgLogServerAddrRev." ::= { hpnicfCfgLogEntry 18 } hpnicfCfgLogServerAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0." ::= { hpnicfCfgLogEntry 19 } hpnicfCfgLogServerAddrVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { hpnicfCfgLogEntry 20 } hpnicfCfgFirstTrapTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Time when the first trap is sent." ::= { hpnicfCfgLog 8 } hpnicfCfgOperate OBJECT IDENTIFIER ::= { hpnicfConfigManObjects 2 } hpnicfCfgOperateGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of copy entries that may be held in hpnicfCfgOperateTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { hpnicfCfgOperate 1 } hpnicfCfgOperateEntryAgeOutTime OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of minutes an unactive hpnicfCfgOperateEntry SHOULD be kept in the hpnicfCfgOperateTable before it is active. The object is a fator taken account of when it needs delete some rows make room in hpnicfCfgOperateTable. " DEFVAL { 5 } ::= { hpnicfCfgOperate 2 } hpnicfCfgOperateResultGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32(1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of copy entries that may be held in hpnicfCfgOperateResultTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { hpnicfCfgOperate 3 } hpnicfCfgOperateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests." ::= { hpnicfCfgOperate 4 } hpnicfCfgOperateEntry OBJECT-TYPE SYNTAX HpnicfCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An operate request entry." INDEX { hpnicfCfgOperateIndex } ::= { hpnicfCfgOperateTable 1 } HpnicfCfgOperateEntry ::= SEQUENCE { hpnicfCfgOperateIndex Integer32, hpnicfCfgOperateType ConfigOperationType, hpnicfCfgOperateProtocol INTEGER, hpnicfCfgOperateFileName DisplayString, hpnicfCfgOperateServerAddress IpAddress, hpnicfCfgOperateUserName DisplayString, hpnicfCfgOperateUserPassword DisplayString, hpnicfCfgOperateEndNotificationSwitch TruthValue, hpnicfCfgOperateRowStatus RowStatus, hpnicfCfgOperateServerPort Integer32, hpnicfCfgOperateSrvAddrType InetAddressType, hpnicfCfgOperateSrvAddrRev InetAddress, hpnicfCfgOperateSrvVPNName DisplayString } hpnicfCfgOperateIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index value of a row in this table." ::= { hpnicfCfgOperateEntry 1 } hpnicfCfgOperateType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the type of operation on configuration." ::= { hpnicfCfgOperateEntry 2 } hpnicfCfgOperateProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2), clusterftp(3), clustertftp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of hpnicfCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hpnicfCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the hpnicfCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of hpnicfCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2. " ::= { hpnicfCfgOperateEntry 3 } hpnicfCfgOperateFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the object of hpnicfCfgOperateType has the value of net2Startup, net2running or running2Net,the value must be specified. The file name may include the path if applicable. If the value of hpnicfCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers.If the value of hpnicfCfgOperateType is running2Net , this node specify the destination file name of transfers. When hpnicfCfgOperateType has the value of startup2net,the object may not be created instead of using the file name of startup configuration file." ::= { hpnicfCfgOperateEntry 4 } hpnicfCfgOperateServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by hpnicfCfgOperateSrvAddrRev for it only support IPv4." ::= { hpnicfCfgOperateEntry 5 } hpnicfCfgOperateUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp. " ::= { hpnicfCfgOperateEntry 6 } hpnicfCfgOperateUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp. " ::= { hpnicfCfgOperateEntry 7 } hpnicfCfgOperateEndNotificationSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a notification should be issued on the completion of the operation." DEFVAL { false } ::= { hpnicfCfgOperateEntry 8 } hpnicfCfgOperateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. When the status is active all the object's value in the entry is not allowed to modified." ::= { hpnicfCfgOperateEntry 9 } hpnicfCfgOperateServerPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used." ::= { hpnicfCfgOperateEntry 10 } hpnicfCfgOperateSrvAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address for hpnicfCfgOperateSrvAddrRev." ::= { hpnicfCfgOperateEntry 11 } hpnicfCfgOperateSrvAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified." ::= { hpnicfCfgOperateEntry 12 } hpnicfCfgOperateSrvVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { hpnicfCfgOperateEntry 13 } hpnicfCfgOperateResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests result." ::= { hpnicfCfgOperate 5 } hpnicfCfgOperateResultEntry OBJECT-TYPE SYNTAX HpnicfCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result entries of configuration operation requests." INDEX { hpnicfCfgOperateResultIndex } ::= { hpnicfCfgOperateResultTable 1 } HpnicfCfgOperateResultEntry ::= SEQUENCE { hpnicfCfgOperateResultIndex Integer32, hpnicfCfgOperateResultOptIndex Integer32, hpnicfCfgOperateResultOpType ConfigOperationType, hpnicfCfgOperateState ConfigOperationStateType, hpnicfCfgOperateTime TimeTicks, hpnicfCfgOperateEndTime TimeTicks, hpnicfCfgOperFailReason DisplayString } hpnicfCfgOperateResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { hpnicfCfgOperateResultEntry 1 } hpnicfCfgOperateResultOptIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The operation index in the hpnicfCfgOperateTable." ::= { hpnicfCfgOperateResultEntry 2 } hpnicfCfgOperateResultOpType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation type in the hpnicfCfgOperateTable." ::= { hpnicfCfgOperateResultEntry 3 } hpnicfCfgOperateState OBJECT-TYPE SYNTAX ConfigOperationStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation state type in the hpnicfCfgOperateTable." ::= { hpnicfCfgOperateResultEntry 4 } hpnicfCfgOperateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes." ::= { hpnicfCfgOperateResultEntry 5 } hpnicfCfgOperateEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the configuration operation is finished." ::= { hpnicfCfgOperateResultEntry 6 } hpnicfCfgOperFailReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reasons of configuration operation." ::= { hpnicfCfgOperateResultEntry 7 } hpnicfCfgExecuteOperate OBJECT IDENTIFIER ::= { hpnicfCfgOperate 6 } hpnicfCfgExecuteOperateResultEntryLimit OBJECT-TYPE SYNTAX Integer32(5..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of ConfigOperationType entries that may be held in hpnicfCfgExecuteResultTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { hpnicfCfgExecuteOperate 1 } hpnicfCfgExecuteResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfCfgExecuteResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of configuration execute result." ::= { hpnicfCfgExecuteOperate 2 } hpnicfCfgExecuteResultEntry OBJECT-TYPE SYNTAX HpnicfCfgExecuteResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result entries of configuration execute operation." INDEX { hpnicfCfgExecuteResultIndex } ::= { hpnicfCfgExecuteResultTable 1 } HpnicfCfgExecuteResultEntry ::= SEQUENCE { hpnicfCfgExecuteResultIndex Integer32, hpnicfCfgExecuteResultOptIndex Integer32, hpnicfCfgExecuteResultOpType ConfigOperationType, hpnicfCfgExecuteState ConfigOperationStateType, hpnicfCfgExecuteTime TimeTicks, hpnicfCfgExecuteEndTime TimeTicks } hpnicfCfgExecuteResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { hpnicfCfgExecuteResultEntry 1 } hpnicfCfgExecuteResultOptIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration execute operation index in the hpnicfCfgExecuteResultTable." ::= { hpnicfCfgExecuteResultEntry 2 } hpnicfCfgExecuteResultOpType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation type in the hpnicfCfgExecuteResultTable." ::= { hpnicfCfgExecuteResultEntry 3 } hpnicfCfgExecuteState OBJECT-TYPE SYNTAX ConfigOperationStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Record the status of the specified operation." ::= { hpnicfCfgExecuteResultEntry 4 } hpnicfCfgExecuteTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time of the execution starts." ::= { hpnicfCfgExecuteResultEntry 5 } hpnicfCfgExecuteEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time of the execution is finished." ::= { hpnicfCfgExecuteResultEntry 6 } hpnicfCfgReset OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot the device with the default configuration." ::= { hpnicfCfgOperate 7 } hpnicfCfgReset2 OBJECT-TYPE SYNTAX INTEGER { normal(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "normal:do nothing. reset :reboot the device with the default configuration. 'normal' will be returned when getting. This node differs from hpnicfCfgReset in value." ::= { hpnicfCfgOperate 8 } hpnicfConfigManNotifications OBJECT IDENTIFIER ::= { hpnicfConfig 2 } hpnicfCfgManEventlog NOTIFICATION-TYPE OBJECTS { hpnicfCfgLogSrcCmd, hpnicfCfgLogSrcData, hpnicfCfgLogDesData } STATUS current DESCRIPTION "The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different." ::= { hpnicfConfigManNotifications 1 } hpnicfCfgOperateCompletion NOTIFICATION-TYPE OBJECTS { hpnicfCfgOperateType, hpnicfCfgOperateTime, hpnicfCfgOperateState, hpnicfCfgOperateEndTime, hpnicfCfgOperFailReason } STATUS current DESCRIPTION "When create hpnicfCfgOperateTable successfully, a notification may be generated." ::= { hpnicfConfigManNotifications 2 } hpnicfCfgInvalidConfigFile NOTIFICATION-TYPE OBJECTS { hpnicfCfgOperateType, hpnicfCfgOperateFileName, hpnicfCfgFirstTrapTime } STATUS current DESCRIPTION "When the configuration file is invalid, this notification will be generated." ::= { hpnicfConfigManNotifications 3 } hpnicfConfigManConformance OBJECT IDENTIFIER ::= { hpnicfConfig 3 } hpnicfConfigManCompliances OBJECT IDENTIFIER ::= { hpnicfConfigManConformance 1 } hpnicfConfigManCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The statement of compliance for those implementing the configuration management MIB." MODULE -- this module MANDATORY-GROUPS { hpnicfCfgManLogGroup, hpnicfCfgOperateGroup, hpnicfCfgManNotificationGroup } OBJECT hpnicfCfgOperateType SYNTAX ConfigOperationType WRITE-SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } DESCRIPTION " " ::= { hpnicfConfigManCompliances 1 } hpnicfConfigManGroups OBJECT IDENTIFIER ::= { hpnicfConfigManConformance 2 } hpnicfCfgManLogGroup OBJECT-GROUP OBJECTS { hpnicfCfgRunModifiedLast, hpnicfCfgRunSavedLast, hpnicfCfgStartModifiedLast, hpnicfCfgLogLimitedEntries, hpnicfCfgLogDeletedEntries, hpnicfCfgLogTime, hpnicfCfgLogSrcCmd, hpnicfCfgLogTerminalType, hpnicfCfgLogTerminalNum, hpnicfCfgLogTerminalUser, hpnicfCfgLogTerminalLocation, hpnicfCfgLogCmdSrcAddress, hpnicfCfgLogVirHost, hpnicfCfgLogServerAddress, hpnicfCfgLogFile, hpnicfCfgLogUserName, hpnicfCfgLogWantBackup, hpnicfCfgLogSrcData, hpnicfCfgLogDesData } STATUS current DESCRIPTION "A collection of objects configuration log group." ::= { hpnicfConfigManGroups 1 } hpnicfCfgOperateGroup OBJECT-GROUP OBJECTS { hpnicfCfgOperateGlobalEntryLimit, hpnicfCfgOperateEntryAgeOutTime, hpnicfCfgOperateType, hpnicfCfgOperateProtocol, hpnicfCfgOperateFileName, hpnicfCfgOperateServerAddress, hpnicfCfgOperateUserName, hpnicfCfgOperateUserPassword, hpnicfCfgOperateTime, hpnicfCfgOperateEndNotificationSwitch, hpnicfCfgOperateResultGlobalEntryLimit, hpnicfCfgOperateState, hpnicfCfgOperateRowStatus, hpnicfCfgOperateResultOptIndex, hpnicfCfgOperateResultOpType, hpnicfCfgOperateEndTime, hpnicfCfgOperFailReason, hpnicfCfgOperateServerPort } STATUS current DESCRIPTION "A group of configuration operation." ::= { hpnicfConfigManGroups 2 } hpnicfCfgManNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpnicfCfgManEventlog, hpnicfCfgOperateCompletion, hpnicfCfgInvalidConfigFile } STATUS current DESCRIPTION "Collection of notification objects." ::= { hpnicfConfigManGroups 3 } END