-- Copyright (C) 2000-2014, 2016-2017 Hewlett-Packard Enterprise Development LP -- ************************************************************************** -- The contents of this software are proprietary and confidential to the -- Hewlett-Packard Development Company, L.P. No part of this program may be -- photocopied, reproduced, or translated into another programming language -- without prior written consent of the Hewlett-Packard Development Co., L.P. -- ************************************************************************** HP-ACCT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF hpSwitch FROM HP-ICF-OID; hpSwitchAccountingMIB MODULE-IDENTITY LAST-UPDATED "201909260000Z" -- Sep 26, 2019 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes objects for managing the Accounting service features of devices in the HP Integrated Communication Facility product line." REVISION "201909260000Z" -- Sep 26, 2019 DESCRIPTION "Updated 'hpSwitchAccountingConfig' with 'hpSwitchAcctSessIdIncSwitchIdentity' object." REVISION "201711220000Z" -- Nov 22, 2017 DESCRIPTION "Updated 'hpSwitchAcctServiceIndex' object with 'restUri' value." REVISION "201408040000Z" -- August 04, 2014 DESCRIPTION "Updated 'hpSwitchAcctServiceMethod' object with 'tacacs' value and updated the description." REVISION "201103050000Z" -- March 05, 2011 DESCRIPTION "Updated 'hpSwitchAcctServiceMethod' object with 'syslog' value." REVISION "200907140000Z" -- July 14, 2009 DESCRIPTION "Added 'hpSwitchAcctSessionIdentification' object, updated 'hpSwitchAcctServiceMode' object with 'interim-update' value." REVISION "200807110000Z" -- July 11, 2008 DESCRIPTION "Added 'hpSwitchAcctServiceServerGroupName' object." REVISION "200108220238Z" -- August 22, 2001 DESCRIPTION "Initial version of this MIB module." ::= { hpSwitch 17 } -- ------------------------------------------------------------ -- Configuration support for Accounting -- ------------------------------------------------------------ hpSwitchAccountingConfig OBJECT IDENTIFIER ::= { hpSwitchAccountingMIB 1 } hpSwitchAcctUpdateInterval OBJECT-TYPE SYNTAX Integer32 (0..525600) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines periodic intervals to send accounting update records (in minutes)." ::= { hpSwitchAccountingConfig 1 } hpSwitchAcctSuppressNullUserName OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether accounting records need to be generated for users, whose username string is NULL. If yes(1), then prevent accounting records from being generated." ::= { hpSwitchAccountingConfig 2 } hpSwitchAcctSessionIdentification OBJECT-TYPE SYNTAX INTEGER { unique(1), common(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how accounting sessions for different accounting service types will be identified. unique - use a unique accounting session identifier in accounting records for each accounting service type (network, exec, system, commands). common - use identical accounting session identifier in all accounting records sent out of switch for a given user's access session, irrespective to the accounting service type that generates the records within the session." DEFVAL { unique } ::= { hpSwitchAccountingConfig 3 } hpSwitchAcctSessIdIncSwitchIdentity OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Include switch-identity in accounting session ID to make it unique across the switches. enable - If enabled, session ID will include switch-identity to make it unique across switches. disable - If disabled, the session ID will not include switch-identity." DEFVAL { disable } ::= { hpSwitchAccountingConfig 4 } hpSwitchAcctServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpSwitchAcctServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the accounting service types, accounting methods and the way of how accounting sessions should be initiated or terminated." ::= { hpSwitchAccountingMIB 2 } hpSwitchAcctServiceEntry OBJECT-TYPE SYNTAX HpSwitchAcctServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An accounting service table entry." INDEX { hpSwitchAcctServiceIndex } ::= {hpSwitchAcctServiceTable 1} HpSwitchAcctServiceEntry ::= SEQUENCE { hpSwitchAcctServiceIndex INTEGER, hpSwitchAcctServiceMethod INTEGER, hpSwitchAcctServiceMode INTEGER, hpSwitchAcctServiceServerGroupName DisplayString } hpSwitchAcctServiceIndex OBJECT-TYPE SYNTAX INTEGER { network(1), exec(2), system(3), commands(4), restUri(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the accounting service type configured on the switch." ::= {hpSwitchAcctServiceEntry 1} hpSwitchAcctServiceMethod OBJECT-TYPE SYNTAX INTEGER { none(1), radius(2), syslog(3), tacacs(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The method used for accounting. A value of none (1) indicates that accounting is not performed. A value of radius (2) indicates that accounting is performed using RADIUS. A value of syslog (3) indicates that accounting is performed using SYSLOG. A value of tacacs (4) indicates that accounting is performed using TACACS+." ::= { hpSwitchAcctServiceEntry 2 } hpSwitchAcctServiceMode OBJECT-TYPE SYNTAX INTEGER { none(1), startStop(2), stopOnly(3), interimUpdate(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of sending accounting messages to the server. A value of none (1) indicates that no accounting messages are sent to the server. A value of startStop (2) indicates that a start accounting message is sent to the server at the beginning of an event and a stop accounting message is sent at the end of the event. A value of stopOnly (3) indicates that a stop accounting message is sent at the end of an event. A value of interim update (4) indicates that an accounting message is sent to the server after the command is executed. This option can be set only if the value of hpSwitchAcctServiceIndex is set to 'commands." ::= { hpSwitchAcctServiceEntry 3 } hpSwitchAcctServiceServerGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name that defines the RADIUS server group that this authentication method is associated with. See the documentation for the maximum length of the group name." ::= { hpSwitchAcctServiceEntry 4 } -- ------------------------------------------------------------ -- Conformance -- ------------------------------------------------------------ hpSwitchAccountingMIBConformance OBJECT IDENTIFIER ::= { hpSwitchAccountingMIB 3 } hpSwitchAccountingMIBCompliances OBJECT IDENTIFIER ::= { hpSwitchAccountingMIBConformance 1} hpSwitchAccountingMIBGroups OBJECT IDENTIFIER ::= { hpSwitchAccountingMIBConformance 2} hpSwitchAccountingMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for devices implementing the HP Accounting Mib." MODULE MANDATORY-GROUPS { hpSwitchAccountingConfigGroup } ::= { hpSwitchAccountingMIBCompliances 1 } hpSwitchAccountingMIBCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices implementing the HP Accounting Mib." MODULE MANDATORY-GROUPS { hpSwitchAccountingConfigGroup1 } ::= { hpSwitchAccountingMIBCompliances 2 } hpSwitchAccountingConfigGroup OBJECT-GROUP OBJECTS { hpSwitchAcctUpdateInterval, hpSwitchAcctSuppressNullUserName, hpSwitchAcctSessionIdentification, hpSwitchAcctServiceMethod, hpSwitchAcctServiceMode, hpSwitchAcctServiceServerGroupName } STATUS deprecated DESCRIPTION "A collection of objects for configuring the accounting features." ::= { hpSwitchAccountingMIBGroups 1 } hpSwitchAccountingConfigGroup1 OBJECT-GROUP OBJECTS { hpSwitchAcctUpdateInterval, hpSwitchAcctSuppressNullUserName, hpSwitchAcctSessionIdentification, hpSwitchAcctServiceMethod, hpSwitchAcctServiceMode, hpSwitchAcctServiceServerGroupName, hpSwitchAcctSessIdIncSwitchIdentity } STATUS current DESCRIPTION "A collection of objects for configuring the accounting features." ::= { hpSwitchAccountingMIBGroups 2 } END