-- **************************************************************************** -- **************************************************************************** -- -- Service Incident Information -- Management Information Base for SNMP Network Management -- -- -- Copyright 1998,2003 Hewlett-Packard Development Company, L.P. -- -- Hewlett-Packard Company shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HP products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HP required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- The Services Incident MIB provides Service Incident notification information. -- -- **************************************************************************** CPQSERVICE-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM RFC1213-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 compaq FROM CPQHOST-MIB sysName FROM RFC1213-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqService OBJECT IDENTIFIER ::= { compaq 164 } cpqServiceMibRev OBJECT IDENTIFIER ::= { cpqService 1 } cpqServiceIncident OBJECT IDENTIFIER ::= { cpqService 2 } cpqService3Incident OBJECT IDENTIFIER ::= { cpqService 3 } -- **************************************************************************** -- Service Information MIB Revision -- ================================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqService Group (1.3.6.1.4.1.232.164) -- cpqServiceMibRev Group (1.3.6.1.4.1.232.164.1) -- -- Implementation of the cpqServiceMibRev group is mandatory for all agents -- supporting the SI MIB. -- -- An SNMP Agent conforming to this document will return a -- cpqServiceMibRevMajor of one (2) and a cpqServiceMibRevMinor of zero (0). -- -- -- ****************************************************************************82 cpqServiceMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information. Correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqServiceMibRev 2 } cpqServiceMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cpqServiceMibRev 1 } -- **************************************************************************** -- Service Incident Common -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqService Group (1.3.6.1.4.1.232.164) -- cpqService Incident Group (1.3.6.1.4.1.232.164.2) -- -- The cpqServiceIncident group contains the general information about the -- service event. -- -- Implementation of the cpqServiceIncident group is mandatory for all -- agents that support the SI MIB. -- -- **************************************************************************** cpqServiceIncidentSeverity OBJECT-TYPE SYNTAX INTEGER { important(1), informational(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The severity of the service incident." ::= { cpqServiceIncident 1 } cpqServiceIncidentStatus OBJECT-TYPE SYNTAX INTEGER { other(1), intransit(2), delivered(3), undelivered(4), assigned(5), closed(6), submitted_to_ISEE(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the service incident." ::= { cpqServiceIncident 2 } cpqServiceIncidentInformation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Provides the URL to the event analysis report. " -- CpqServiceIncidentInformation is a URL pointing to -- the Service Rule describing the serviceable event. ::= { cpqServiceIncident 3 } cpqServiceIncidentEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Brief description of the event that initiated the service incident." ::= { cpqServiceIncident 4 } cpqServiceIncidentUniqueID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Unique Event Analysis Identifier assigned to the incident." ::= { cpqServiceIncident 5 } cpqServiceIncidentTimeofOriginalEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Time of the original event this service event relates to." -- Time format in the form of "12 September 2003 23:23:23.000". ::= { cpqServiceIncident 6 } cpqServiceIncidentSourceSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the system this service event relates to." ::= { cpqServiceIncident 7 } cpqServiceIncidentIPAddessOfSource OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address of the system this service event relates to." ::= { cpqServiceIncident 8 } cpqServiceISEEIncidentInformation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a URL pointing to the Service Incident status in ISEE if available." -- This is a URL pointing to the Service Incident status if ISEE is capable of -- providing this information. This would be an XML tag including a text field -- identifying the status of the incident and an attached URL pointing to -- incident information accessed via the ISEE client or the SPOP. If the ISEE -- client can not provide this tag information, but could provide status -- information, then the returned values would be as defined here. ::= { cpqServiceIncident 9 } cpqServiceIncidentIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Service Incident Identifier assigned to the incident report by the ISEE client." ::= { cpqServiceIncident 10 } cpqServiceIncidentReceiveTrapOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the originally received event." ::= { cpqServiceIncident 11 } cpqServiceIncidentFilterOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS deprecated DESCRIPTION "The OID of the value that is used by the OSEM filter." ::= { cpqServiceIncident 12 } cpqServiceIncidentFilterValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS deprecated DESCRIPTION "The value contained in the Filter OID." ::= { cpqServiceIncident 13 } cpqServiceRecommendedAction1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Recommended action." ::= { cpqServiceIncident 14 } cpqServiceRecommendedAction2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Recommended action continued" ::= { cpqServiceIncident 15 } cpqServiceRecommendedAction3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Recommended action continued" ::= { cpqServiceIncident 16 } cpqServiceCustomerSelfRepairInstructionURL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A URL pointing to additional repair information" ::= { cpqServiceIncident 17 } cpqServiceEventSeverity OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), informational(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The severity of the service incident." ::= { cpqServiceIncident 18 } cpqServiceAnalyzerSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the system this service event was analyzed on." ::= { cpqServiceIncident 19 } cpqServiceFRUList1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit information" ::= { cpqServiceIncident 20 } cpqServiceFRUList2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit information continued" ::= { cpqServiceIncident 21 } cpqServiceFRUList3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit information continued" ::= { cpqServiceIncident 22 } cpqServiceFRUList4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit information continued" ::= { cpqServiceIncident 23 } cpqServiceLocation1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit location" ::= { cpqServiceIncident 24 } cpqServiceLocation2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Replaceable Unit location continued" ::= { cpqServiceIncident 25 } -- **************************************************************************** -- Service Incident Common legacy definition -- ========================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqService Group (1.3.6.1.4.1.232.164) -- cpqService3 Incident Group (1.3.6.1.4.1.232.164.3) -- -- The cpqService3Incident group contains the general information about the -- service event. -- -- -- **************************************************************************** cpqService3IncidentSeverity OBJECT-TYPE SYNTAX INTEGER { important(1), informational(2) } ACCESS read-only STATUS deprecated DESCRIPTION "The severity of the service incident." ::= { cpqService3Incident 1 } cpqService3IncidentStatus OBJECT-TYPE SYNTAX INTEGER { other(1), intransit(2), delivered(3), undelivered(4), assigned(5), closed(6), submitted_to_ISEE(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the service incident." ::= { cpqService3Incident 2 } cpqService3IncidentInformation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Provides the URL to the event analysis report. " -- CpqServiceIncidentInformation is a URL pointing to -- the Service Rule describing the serviceable event. ::= { cpqService3Incident 3 } cpqService3IncidentEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Brief description of the event that initiated the service incident." ::= { cpqService3Incident 4 } cpqService3IncidentUniqueID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Unique Event Analysis Identifier assigned to the incident." ::= { cpqService3Incident 5 } cpqService3IncidentTimeofOriginalEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Time of the original event this service event relates to." -- Time format in the form of "12 September 2003 23:23:23.000". ::= { cpqService3Incident 6 } cpqService3IncidentSourceSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the system this service event relates to." ::= { cpqService3Incident 7 } cpqService3IncidentIPAddessOfSource OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS optional DESCRIPTION "IP Address of the system this service event relates to." ::= { cpqService3Incident 8 } cpqService3ISEEIncidentInformation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This is a URL pointing to the Service Incident status in ISEE if available." -- This is a URL pointing to the Service Incident status if ISEE is capable of -- providing this information. This would be an XML tag including a text field -- identifying the status of the incident and an attached URL pointing to -- incident information accessed via the ISEE client or the SPOP. If the ISEE -- client can not provide this tag information, but could provide status -- information, then the returned values would be as defined here. ::= { cpqService3Incident 9 } cpqService3IncidentIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Service Incident Identifier assigned to the incident report by the ISEE client." ::= { cpqService3Incident 10 } cpqService3IncidentReceiveTrapOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS optional DESCRIPTION "The ID of the originally received event." ::= { cpqService3Incident 11 } cpqService3IncidentFilterOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS deprecated DESCRIPTION "The OID of the value that is used by the OSEM filter." ::= { cpqService3Incident 12 } cpqService3IncidentFilterValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS deprecated DESCRIPTION "The value contained in the Filter OID." ::= { cpqService3Incident 13 } cpqService3RecommendedAction1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Recommended action." ::= { cpqService3Incident 14 } cpqService3RecommendedAction2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Recommended action continued" ::= { cpqService3Incident 15 } cpqService3RecommendedAction3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Recommended action continued" ::= { cpqService3Incident 16 } cpqService3CustomerSelfRepairInstructionURL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "A URL pointing to additional repair information" ::= { cpqService3Incident 17 } cpqService3EventSeverity OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), informational(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The severity of the service incident." ::= { cpqService3Incident 18 } cpqService3AnalyzerSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of the system this service event was analyzed on." ::= { cpqService3Incident 19 } cpqService3FRUList1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit information" ::= { cpqService3Incident 20 } cpqService3FRUList2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit information continued" ::= { cpqService3Incident 21 } cpqService3FRUList3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit information continued" ::= { cpqService3Incident 22 } cpqService3FRUList4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit information continued" ::= { cpqService3Incident 23 } cpqService3Location1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit location" ::= { cpqService3Incident 24 } cpqService3Location2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Replaceable Unit location continued" ::= { cpqService3Incident 25 } cpqService3Incident7Status OBJECT-TYPE SYNTAX INTEGER { error(0), pending(1), submitted(2), received(3), open(4), closed(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the service incident for IRS 7.x." -- adjust as desired based on implementation and remove this comment ::= { cpqService3Incident 26 } cpqService3CaseIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Unique Case Identifier assigned to the incident if a case is opened in the data center." ::= { cpqService3Incident 27 } cpqService3IncidentToolName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the tool that is generating the trap." ::= { cpqService3Incident 28 } cpqService3IncidentToolVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The version of the tool that is generating the trap." ::= { cpqService3Incident 29 } cpqService3IncidentIPv6AddressOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The IPv6 address of the source device." ::= { cpqService3Incident 30 } cpqService3IncidentSerialNumberOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The serial number of the source device." ::= { cpqService3Incident 31 } cpqService3IncidentProductNumberOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The product number of the source device." ::= { cpqService3Incident 32 } cpqService3IncidentProductModelOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The product model of the source device." ::= { cpqService3Incident 33 } cpqService3IncidentUserEnteredSerialNumberOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The user provided serial number of the source device." ::= { cpqService3Incident 34 } cpqService3IncidentUserEnteredProductNumberOfSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The user provided product number of the source device." ::= { cpqService3Incident 35 } cpqService3IncidentMgmtNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The name of the management node." ::= { cpqService3Incident 36 } cpqService3IncidentIPAddressOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The IP address of the management node." ::= { cpqService3Incident 37 } cpqService3IncidentIPv6AddressOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The IPv6 address of the management node." ::= { cpqService3Incident 38 } cpqService3IncidentSerialNumberOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The serial number of the management node." ::= { cpqService3Incident 39 } cpqService3IncidentProductNumberOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The product number of the management node." ::= { cpqService3Incident 40 } cpqService3IncidentUserEnteredSerialNumberOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The user provided serial number of the management node." ::= { cpqService3Incident 41 } cpqService3IncidentUserEnteredProductNumberOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The user provided product number of the management node." ::= { cpqService3Incident 42 } cpqService3IncidentProductModelOfMgmtNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The product model of the management node." ::= { cpqService3Incident 43 } -- **************************************************************************** -- Service MIB Trap Definitions -- ============================ -- -- The SNMP trap messages must not be bigger than 484 octets (bytes). -- -- Trap support in an SNMP agent implementation is optional. An SNMP -- agent implementation may support all, some, or none of the traps. -- If traps are supported, The user should be provided with the option of -- disabling traps. -- -- ************************************************************************** -- New in 164.00 cpqServiceInformation TRAP-TYPE ENTERPRISE cpqService VARIABLES { sysName, cpqServiceIncidentSeverity, cpqServiceIncidentStatus, cpqServiceIncidentInformation, cpqServiceIncidentEvent, cpqServiceIncidentUniqueID, cpqServiceIncidentTimeofOriginalEvent, cpqServiceIncidentSourceSystemName, cpqServiceIncidentIPAddessOfSource, cpqServiceISEEIncidentInformation, cpqServiceIncidentIdentifier, cpqServiceIncidentReceiveTrapOID, cpqServiceIncidentFilterOID, cpqServiceIncidentFilterValue } DESCRIPTION "This trap will be sent any time a service incident is logged or updated. A service incident is generated when it is determined that a service event has occurred based upon an analysis of system initiated event traps or an update to a service event has occurred. User Action: None Required" --#TYPE "A Service Incident has been reported (Type 1)." --#SUMMARY "%s reported an %s Service Incident Trap whose status is located at %s." --#ARGUMENTS {0, 2, 3} -- (the argument consists of the -- following: -- - text string containing a brief description of the -- event type with an associated url pointing to a -- description of the service event provided by -- OSEM/MSADB -- - text containing the device name with an associated -- URL pointing to the server agent that initiated the -- event. -- - the Event Time) --#SEVERITY MAJOR --#TIMEINDEX 18 --#CATEGORY "HP Service Events" --#ENABLE true --#NOTICE_HANDLER "com.hp.mx.portal.alerts.handlers.ServiceTrapDisplayHandler" --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.ServiceTrapRuleHandler" ::= 164001 cpqService2Information TRAP-TYPE ENTERPRISE cpqService VARIABLES { sysName, cpqServiceIncidentStatus, cpqServiceIncidentInformation, cpqServiceIncidentEvent, cpqServiceIncidentUniqueID, cpqServiceIncidentTimeofOriginalEvent, cpqServiceIncidentSourceSystemName, cpqServiceIncidentIPAddessOfSource, cpqServiceISEEIncidentInformation, cpqServiceIncidentIdentifier, cpqServiceIncidentReceiveTrapOID, cpqServiceRecommendedAction1, cpqServiceRecommendedAction2, cpqServiceRecommendedAction3, cpqServiceCustomerSelfRepairInstructionURL } DESCRIPTION "This event will be sent any time a service incident is reported. A service incident is generated when it is determined that a serviceable event has occurred based upon analysis of system-initiated events. User Action: Refer to the Recommended Action section under the event details section" --#TYPE "A Service Incident has been reported (Type 2)." --#SUMMARY "%s reported a Service Incident Trap whose status is located at %s." --#ARGUMENTS {0, 1} -- (the argument consists of the -- following: -- - text string containing a brief description of the -- event type with an associated url pointing to a -- description of the service event provided by -- OSEM/MSADB -- - text containing the device name with an associated -- URL pointing to the server agent that initiated the -- event. -- - the Event Time) --#SEVERITY MAJOR --#TIMEINDEX 18 --#CATEGORY "HP Service Events" --#ENABLE true --#NOTICE_HANDLER "com.hp.mx.portal.alerts.handlers.ServiceTrapDisplayHandler" --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.ServiceTrapRuleHandler" ::= 164002 cpqService3Information TRAP-TYPE ENTERPRISE cpqService VARIABLES { cpqService3IncidentSourceSystemName, cpqService3IncidentIPAddessOfSource, cpqService3EventSeverity, cpqService3IncidentStatus, cpqService3IncidentInformation, cpqService3IncidentEvent, cpqService3IncidentUniqueID, cpqService3IncidentTimeofOriginalEvent, cpqService3AnalyzerSystemName, cpqService3ISEEIncidentInformation, cpqService3IncidentIdentifier, cpqService3IncidentReceiveTrapOID, cpqService3RecommendedAction1, cpqService3RecommendedAction2, cpqService3RecommendedAction3, cpqService3FRUList1, cpqService3FRUList2, cpqService3FRUList3, cpqService3FRUList4, cpqService3Location1, cpqService3Location2, cpqService3CustomerSelfRepairInstructionURL } DESCRIPTION "This event will be sent any time a service incident is reported. A service incident is generated when it is determined that a serviceable event has occurred based upon analysis of system-initiated events. User Action: Refer to the Recommended Action section under the event details section" --#TYPE "A Service Incident has been reported (Type 3)." --#SUMMARY "%s reported a Service Incident Trap whose status is located at %s." --#ARGUMENTS {0, 4} -- (the argument consists of the -- following: -- - text string containing a brief description of the -- event type with an associated url pointing to a -- description of the service event provided by -- OSEM/MSADB -- - text containing the device name with an associated -- URL pointing to the server agent that initiated the -- event. -- - the Event Time) --#SEVERITY MAJOR --#TIMEINDEX 18 --#CATEGORY "HP Service Events" --#ENABLE true --#VARBINDSEVERITY 3 --#SEVERITYMAP "INFORMATIONAL = INFORMATIONAL, MINOR = MINOR, WARNING = WARNING, MAJOR = MAJOR, CRITICAL = CRITICAL,5 = INFORMATIONAL, 4 = WARNING, 3=MINOR, 2 = MAJOR, 1 = CRITICAL" --#NOTICE_HANDLER "com.hp.mx.portal.alerts.handlers.ServiceTrapDisplayHandler" --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.ServiceTrapRuleHandler" ::= 164003 -- This Trap presents CpqServiceIncidentSeverity as an XML Tag including a text -- description as described within the varbind definition and -- CpqServiceIncidentInformation as a hidden URL pointing to -- the Service Rule describing the serviceable event (OSEM). -- This Trap presents cpqServiceIncidentStatus as an XML tag including a text -- field identifying the originating status of the incident and -- CpqServiceIncidentStatus an a hidden URL pointing to incident information -- accessed via the ISEE client or the SPOP. -- If the ISEE client can not provide this tag information, but could provide -- status information, then the returned values would be as defined within the -- varbind definition. cpqService4Information TRAP-TYPE ENTERPRISE cpqService VARIABLES { cpqService3IncidentSourceSystemName, cpqService3IncidentIPAddessOfSource, cpqService3EventSeverity, cpqService3Incident7Status, cpqService3IncidentInformation, cpqService3IncidentEvent, cpqService3IncidentUniqueID, cpqService3IncidentTimeofOriginalEvent, cpqService3AnalyzerSystemName, cpqService3ISEEIncidentInformation, cpqService3IncidentIdentifier, cpqService3CaseIdentifier, cpqService3IncidentReceiveTrapOID, cpqService3RecommendedAction1, cpqService3RecommendedAction2, cpqService3RecommendedAction3, cpqService3FRUList1, cpqService3FRUList2, cpqService3FRUList3, cpqService3FRUList4, cpqService3Location1, cpqService3Location2, cpqService3CustomerSelfRepairInstructionURL } DESCRIPTION "This event will be sent any time a service incident is reported. A service incident is generated when it is determined that a serviceable event has occurred based upon analysis of system-initiated events. User Action: Refer to the Recommended Action section under the event details section" --#TYPE "A Service Incident has been reported (Type 4)." --#SUMMARY "%s reported a Service Incident Trap whose status is %s." --#ARGUMENTS {0, 3} -- (the argument consists of the -- following: -- - text string containing a brief description of the -- event type with an associated url pointing to a -- description of the service event provided by -- OSEM/MSADB -- - text containing the device name with an associated -- URL pointing to the server agent that initiated the -- event. -- - the Event Time) --#SEVERITY MAJOR --#TIMEINDEX 18 --#CATEGORY "HP Service Events" --#ENABLE true --#VARBINDSEVERITY 3 --#SEVERITYMAP "INFORMATIONAL = INFORMATIONAL, MINOR = MINOR, WARNING = WARNING, MAJOR = MAJOR, CRITICAL = CRITICAL,5 = INFORMATIONAL, 4 = WARNING, 3=MINOR, 2 = MAJOR, 1 = CRITICAL" --#NOTICE_HANDLER "com.hp.mx.portal.alerts.handlers.ServiceTrapDisplayHandler" --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.ServiceTrapRuleHandler" ::= 164004 -- This Trap presents CpqServiceIncidentSeverity as an XML Tag including a text -- description as described within the varbind definition and -- CpqServiceIncidentInformation as a hidden URL pointing to -- the Service Rule describing the serviceable event (OSEM). -- This Trap presents cpqServiceIncidentStatus as an XML tag including a text -- field identifying the originating status of the incident and -- CpqServiceIncidentStatus an a hidden URL pointing to incident information -- accessed via the ISEE client or the SPOP. -- If the ISEE client can not provide this tag information, but could provide -- status information, then the returned values would be as defined within the -- varbind definition. cpqService5Information TRAP-TYPE ENTERPRISE cpqService VARIABLES { cpqService3IncidentSourceSystemName, cpqService3IncidentIPAddessOfSource, cpqService3EventSeverity, cpqService3Incident7Status, cpqService3IncidentInformation, cpqService3IncidentEvent, cpqService3IncidentUniqueID, cpqService3IncidentTimeofOriginalEvent, cpqService3AnalyzerSystemName, cpqService3ISEEIncidentInformation, cpqService3IncidentIdentifier, cpqService3CaseIdentifier, cpqService3IncidentReceiveTrapOID, cpqService3RecommendedAction1, cpqService3RecommendedAction2, cpqService3RecommendedAction3, cpqService3FRUList1, cpqService3FRUList2, cpqService3FRUList3, cpqService3FRUList4, cpqService3Location1, cpqService3Location2, cpqService3CustomerSelfRepairInstructionURL, cpqService3IncidentToolName, cpqService3IncidentToolVersion, cpqService3IncidentIPv6AddressOfSource, cpqService3IncidentSerialNumberOfSource, cpqService3IncidentProductNumberOfSource, cpqService3IncidentProductModelOfSource, cpqService3IncidentUserEnteredSerialNumberOfSource, cpqService3IncidentUserEnteredProductNumberOfSource, cpqService3IncidentMgmtNodeName, cpqService3IncidentIPAddressOfMgmtNode, cpqService3IncidentIPv6AddressOfMgmtNode, cpqService3IncidentSerialNumberOfMgmtNode, cpqService3IncidentProductNumberOfMgmtNode, cpqService3IncidentUserEnteredSerialNumberOfMgmtNode, cpqService3IncidentUserEnteredProductNumberOfMgmtNode, cpqService3IncidentProductModelOfMgmtNode } DESCRIPTION "This event will be sent any time a service incident is reported. A service incident is generated when it is determined that a serviceable event has occurred based upon analysis of system-initiated events. User Action: Refer to the Recommended Action section under the event details section" --#TYPE "A Service Incident has been reported (Type 5)." --#SUMMARY "%s reported a Service Incident Trap whose status is %s." --#ARGUMENTS {0, 3} -- (the argument consists of the -- following: -- - Text containing name of the system this service event relates to. -- - The status of the service incident for IRS 7.x.) --#SEVERITY MAJOR --#TIMEINDEX 18 --#CATEGORY "HP Service Events" --#ENABLE true --#VARBINDSEVERITY 3 --#SEVERITYMAP "INFORMATIONAL = INFORMATIONAL, MINOR = MINOR, WARNING = WARNING, MAJOR = MAJOR, CRITICAL = CRITICAL,5 = INFORMATIONAL, 4 = WARNING, 3=MINOR, 2 = MAJOR, 1 = CRITICAL" --#NOTICE_HANDLER "com.hp.mx.portal.alerts.handlers.ServiceTrapDisplayHandler" --#RULE_HANDLER "com.hp.mx.core.protocol.snmp.trap.components.ServiceTrapRuleHandler" ::= 164005 END