-- **************************************************************************** -- **************************************************************************** -- -- iSCSI Information -- Management Information Base for SNMP Network Management -- -- -- © Copyright 2016-2020 Hewlett Packard Enterprise Development LP -- Hewlett-Packard Company shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HP products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HP required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQISCSI-MIB DEFINITIONS ::= BEGIN IMPORTS compaq FROM CPQHOST-MIB enterprises FROM RFC1155-SMI Counter FROM RFC1155-SMI Gauge FROM RFC1155-SMI TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 sysName FROM RFC1213-MIB cpqHoTrapFlags FROM CPQHOST-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqiScsiModule OBJECT IDENTIFIER ::= { compaq 169 } cpqiScsiMibRev OBJECT IDENTIFIER ::= { cpqiScsiModule 1 } cpqiScsiObjects OBJECT IDENTIFIER ::= { cpqiScsiModule 2 } cpqiScsiDescriptors OBJECT IDENTIFIER ::= { cpqiScsiObjects 1 } cpqiScsiInstance OBJECT IDENTIFIER ::= { cpqiScsiObjects 2 } cpqiScsiPortal OBJECT IDENTIFIER ::= { cpqiScsiObjects 3 } cpqiScsiTargetPortal OBJECT IDENTIFIER ::= { cpqiScsiObjects 4 } cpqiScsiInitiatorPortal OBJECT IDENTIFIER ::= { cpqiScsiObjects 5 } cpqiScsiNode OBJECT IDENTIFIER ::= { cpqiScsiObjects 6 } cpqiScsiTarget OBJECT IDENTIFIER ::= { cpqiScsiObjects 7 } cpqiScsiTgtAuthorization OBJECT IDENTIFIER ::= { cpqiScsiObjects 8 } cpqiScsiInitiator OBJECT IDENTIFIER ::= { cpqiScsiObjects 9 } cpqiScsiIntrAuthorization OBJECT IDENTIFIER ::= { cpqiScsiObjects 10 } cpqiScsiSession OBJECT IDENTIFIER ::= { cpqiScsiObjects 11 } cpqiScsiConnection OBJECT IDENTIFIER ::= { cpqiScsiObjects 12 } -- **************************************************************************** -- -- iSCSI Information MIB Revision -- ================================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqiScsiModule Group (1.3.6.1.4.1.232.169) -- cpqiScsiMibRev Group (1.3.6.1.4.1.232.169.1) -- cpqiScsiObjects (1.3.6.1.4.1.232.169.2) -- -- Implementation of the cpqiScsiMibRev group is mandatory for all agents -- supporting the iSCSI MIB. -- -- An SNMP Agent conforming to this document will return a -- cpqiScsiMibRevMajor of one (1) and a cpqiScsiMibRevMinor of four (4). -- -- -- **************************************************************************** cpqiScsiMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqiScsiMibRev 1 } cpqiScsiMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred." ::= { cpqiScsiMibRev 2 } cpqiScsiMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the iSCSI system represented by this MIB." ::= { cpqiScsiMibRev 3 } -- **************************************************************************** -- -- cpqiScsiInstanceAttributesTable -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInstance Group (1.3.6.1.4.1.232.169.2.2) -- cpqiScsiInstanceAttributesTable (1.3.6.1.4.1.232.169.2.2.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all agents that support -- the iSCSI MIB. -- -- **************************************************************************** cpqiScsiInstanceAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInstanceAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI instances present on the system." ::= { cpqiScsiInstance 1 } cpqiScsiInstanceAttributesEntry OBJECT-TYPE SYNTAX IscsiInstanceAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI instance." INDEX { cpqiScsiInstIndex } ::= { cpqiScsiInstanceAttributesTable 1 } IscsiInstanceAttributesEntry ::= SEQUENCE { cpqiScsiInstIndex Gauge, cpqiScsiInstDescr DisplayString, cpqiScsiInstVersionMin INTEGER, cpqiScsiInstVersionMax INTEGER, cpqiScsiInstVendorID DisplayString, cpqiScsiInstVendorVersion DisplayString, cpqiScsiInstPortalNumber Gauge, cpqiScsiInstNodeNumber Gauge, cpqiScsiInstSessionNumber Gauge, cpqiScsiInstSsnFailures Counter, cpqiScsiInstLastSsnFailureType OBJECT IDENTIFIER, cpqiScsiInstLastSsnRmtNodeName DisplayString } cpqiScsiInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiInstanceAttributesEntry 1 } cpqiScsiInstDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string, determined by the implementation to describe the iSCSI instance. When only a single instance is present, this object may be set to the zero-length string. with multiple iSCSI instances, it may be used in an implementation-dependent manner to describe the purpose of the respective instance." ::= { cpqiScsiInstanceAttributesEntry 2 } cpqiScsiInstVersionMin OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum version number of the iSCSI specification supported by this instance." ::= { cpqiScsiInstanceAttributesEntry 3 } cpqiScsiInstVersionMax OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum version number of the iSCSI specification supported by this instance." ::= { cpqiScsiInstanceAttributesEntry 4 } cpqiScsiInstVendorID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string describing the manufacturer of the implementation of this instance." ::= { cpqiScsiInstanceAttributesEntry 5 } cpqiScsiInstVendorVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string set by the manufacturer describing the version of the implementation of this instance. The format of this string is determined solely by the manufacturer, and is for informational purposes only. It is unrelated to the iSCSI specification version numbers." ::= { cpqiScsiInstanceAttributesEntry 6 } cpqiScsiInstPortalNumber OBJECT-TYPE SYNTAX Gauge -- Units -- transport endpoints ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the cpqiScsiPortalAttributesTable which are currently associated with this iSCSI instance." ::= { cpqiScsiInstanceAttributesEntry 7 } cpqiScsiInstNodeNumber OBJECT-TYPE SYNTAX Gauge -- Units -- Internet Network Addresses ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the cpqiScsiNodeAttributesTable which are currently associated with this iSCSI instance." ::= { cpqiScsiInstanceAttributesEntry 8 } cpqiScsiInstSessionNumber OBJECT-TYPE SYNTAX Gauge -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The number of rows in the cpqiScsiSessionAttributesTable which are currently associated with this iSCSI instance." ::= { cpqiScsiInstanceAttributesEntry 9 } cpqiScsiInstSsnFailures OBJECT-TYPE SYNTAX Counter -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a session belonging to this instance has been failed." ::= { cpqiScsiInstanceAttributesEntry 10 } cpqiScsiInstLastSsnFailureType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The counter object in the cpqiScsiInstSsnErrorStatsTable that was incremented when the last session failure occurred. If the reason for failure is not found in the cpqiScsiInstSsnErrorStatsTable, the value { 0.0 } is used instead." ::= { cpqiScsiInstanceAttributesEntry 11 } cpqiScsiInstLastSsnRmtNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string describing the name of the remote node from the failed session. If the reason for failure is not found then a null string will be returned." ::= { cpqiScsiInstanceAttributesEntry 12 } -- **************************************************************************** -- cpqiScsiInstanceSsnErrorStatsTable -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInstance Group (1.3.6.1.4.1.232.169.2.2) -- cpqiScsiInstanceSsnErrorStatsTable (1.3.6.1.4.1.232.169.2.2.2) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiInstanceSsnErrorStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInstanceSsnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of error types that will cause a session failure." ::= { cpqiScsiInstance 2 } cpqiScsiInstanceSsnErrorStatsEntry OBJECT-TYPE SYNTAX IscsiInstanceSsnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI instance." INDEX { cpqiScsiInstIndex } -- Augments cpqiScsiInstanceAttributesEntry ::= { cpqiScsiInstanceSsnErrorStatsTable 1 } IscsiInstanceSsnErrorStatsEntry ::= SEQUENCE { cpqiScsiInstSsnInstIndex Gauge, cpqiScsiInstSsnDigestErrors Counter, cpqiScsiInstSsnCxnTimeoutErrors Counter, cpqiScsiInstSsnFormatErrors Counter } cpqiScsiInstSsnInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiInstanceSsnErrorStatsEntry 1 } cpqiScsiInstSsnDigestErrors OBJECT-TYPE SYNTAX Counter -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to receipt of a PDU containing header or data digest errors." ::= { cpqiScsiInstanceSsnErrorStatsEntry 2 } cpqiScsiInstSsnCxnTimeoutErrors OBJECT-TYPE SYNTAX Counter -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to a sequence exceeding a time limit." ::= { cpqiScsiInstanceSsnErrorStatsEntry 3 } cpqiScsiInstSsnFormatErrors OBJECT-TYPE SYNTAX Counter -- Units -- sessions ACCESS read-only STATUS mandatory DESCRIPTION "The count of sessions which were failed due to receipt of a PDU which contained a format error." ::= { cpqiScsiInstanceSsnErrorStatsEntry 4 } -- **************************************************************************** -- cpqiScsiPortalAttributesTable -- ========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiPortal Group (1.3.6.1.4.1.232.169.2.3) -- cpqiScsiPortalAttributesTable (1.3.6.1.4.1.232.169.2.3.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of transport endpoints (using TCP or another transport protocol) used by this iSCSI instance. An iSCSI instance may use a portal to listen for incoming connections to its targets, to initiate connections to other targets, or both." ::= { cpqiScsiPortal 1 } cpqiScsiPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular portal instance." INDEX { cpqiScsiInstIndex, cpqiScsiPortalIndex } ::= { cpqiScsiPortalAttributesTable 1 } IscsiPortalAttributesEntry ::= SEQUENCE { cpqiScsiPortalInstIndex Gauge, cpqiScsiPortalIndex Gauge, cpqiScsiPortalRowStatus INTEGER, cpqiScsiPortalRoles OCTET STRING, cpqiScsiPortalAddrType INTEGER, cpqiScsiPortalAddr OCTET STRING, cpqiScsiPortalProtocol INTEGER, cpqiScsiPortalMaxRecvDataSegLength INTEGER, cpqiScsiPortalPrimaryHdrDigest INTEGER, cpqiScsiPortalPrimaryDataDigest INTEGER, cpqiScsiPortalSecondaryHdrDigest INTEGER, cpqiScsiPortalSecondaryDataDigest INTEGER, cpqiScsiPortalRecvMarker INTEGER } cpqiScsiPortalInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiPortalAttributesEntry 1 } cpqiScsiPortalIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular transport endpoint within this iSCSI instance." ::= { cpqiScsiPortalAttributesEntry 2 } cpqiScsiPortalRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the row." ::= { cpqiScsiPortalAttributesEntry 3 } cpqiScsiPortalRoles OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- targetTypePortal(0) -- initiatorTypePortal(1) ACCESS read-write STATUS mandatory DESCRIPTION "A portal can operate in one or both of two roles: as a target portal and/or an initiator portal. If the portal will operate in both roles, both bits must be set. When a new cpqiScsiPortalAttributesEntry is to be created, the agent should use this object as a hint for the creation of a new cpqiScsiTgtPortalAttributesEntry and/or cpqiScsiIntrPortalAttributesEntry." ::= { cpqiScsiPortalAttributesEntry 4 } cpqiScsiPortalAddrType OBJECT-TYPE SYNTAX INTEGER { -- unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of Internet Network Address in the cpqiScsiPortalAddr." DEFVAL { ipv4 } ::= { cpqiScsiPortalAttributesEntry 5 } cpqiScsiPortalAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's Internet Network Address." ::= { cpqiScsiPortalAttributesEntry 6 } cpqiScsiPortalProtocol OBJECT-TYPE SYNTAX INTEGER { icmp(1), igmp(2), ggp(3), ip(4), st(5), tcp(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The portal's transport protocol. The following values are defined: icmp(1) Internet Control Message igmp(2) Internet Group Management ggp(3) Gateway-to-Gateway ip(4) IP in IP (encapsulation) st(5) Stream tcp(6) Transmission Control" DEFVAL { tcp } ::= { cpqiScsiPortalAttributesEntry 7 } cpqiScsiPortalMaxRecvDataSegLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum PDU length this portal can receive. This may be constrained by hardware characteristics and individual implementations may chose not to allow this object to be changed." DEFVAL { 8192 } ::= { cpqiScsiPortalAttributesEntry 8 } cpqiScsiPortalPrimaryHdrDigest OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The preferred header digest for this portal." DEFVAL { crc32c } ::= { cpqiScsiPortalAttributesEntry 9 } cpqiScsiPortalPrimaryDataDigest OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The preferred data digest method for this portal." DEFVAL { crc32c } ::= { cpqiScsiPortalAttributesEntry 10 } cpqiScsiPortalSecondaryHdrDigest OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-write STATUS mandatory DESCRIPTION "An alternate header digest preference for this portal." DEFVAL { noDigest } ::= { cpqiScsiPortalAttributesEntry 11 } cpqiScsiPortalSecondaryDataDigest OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-write STATUS mandatory DESCRIPTION "An alternate data digest preference for this portal." DEFVAL { noDigest } ::= { cpqiScsiPortalAttributesEntry 12 } cpqiScsiPortalRecvMarker OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates whether or not this portal will request markers in it's incoming data stream." DEFVAL { false } ::= { cpqiScsiPortalAttributesEntry 13 } -- **************************************************************************** -- cpqiScsiTgtPortalAttributesTable -- ============================= -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiTargetPortal Group (1.3.6.1.4.1.232.169.2.4) -- cpqiScsiTgtPortalAttributesTable (1.3.6.1.4.1.232.169.2.4.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiTgtPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTgtPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of transport endpoints (using TCP or another transport protocol) on which this iSCSI instance listens for incoming connections to its targets." ::= { cpqiScsiTargetPortal 1 } cpqiScsiTgtPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiTgtPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular portal instance that is used to listen for incoming connections to local targets. This row is populated for each cpqiScsiPortalAttributesEntry row that may be used as a target portal." INDEX { cpqiScsiInstIndex, cpqiScsiPortalIndex } ::= { cpqiScsiTgtPortalAttributesTable 1 } IscsiTgtPortalAttributesEntry ::= SEQUENCE { cpqiScsiTgtPortalInstIndex Gauge, cpqiScsiTgtPortalPortalIndex Gauge, cpqiScsiTgtPortalPort Gauge, cpqiScsiTgtPortalTag INTEGER } cpqiScsiTgtPortalInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiTgtPortalAttributesEntry 1 } cpqiScsiTgtPortalPortalIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular transport endpoint within this iSCSI instance." ::= { cpqiScsiTgtPortalAttributesEntry 2 } cpqiScsiTgtPortalPort OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The portal's transport protocol port number on which the portal listens for incoming iSCSI connections when the portal is used as a target portal." ::= { cpqiScsiTgtPortalAttributesEntry 3 } cpqiScsiTgtPortalTag OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's aggregation tag when portal is used as a target portal. Multiple-connection sessions may be aggregated over portals sharing an identical aggregation tag." ::= { cpqiScsiTgtPortalAttributesEntry 4 } -- **************************************************************************** -- cpqiScsiIntrPortalAttributesTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInitiatorPortal Group (1.3.6.1.4.1.232.169.2.5) -- cpqiScsiIntrPortalAttributesTable (1.3.6.1.4.1.232.169.2.5.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiIntrPortalAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiIntrPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Internet Network Addresses (using TCP or another transport protocol) from which this iSCSI instance may initiate connections to other targets." ::= { cpqiScsiInitiatorPortal 1 } cpqiScsiIntrPortalAttributesEntry OBJECT-TYPE SYNTAX IscsiIntrPortalAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular portal instance that is used to initiate connections to iSCSI targets. This row is populated for each cpqiScsiPortalAttributesEntry row that may be used as an initiator portal." INDEX { cpqiScsiInstIndex, cpqiScsiPortalIndex } ::= { cpqiScsiIntrPortalAttributesTable 1 } IscsiIntrPortalAttributesEntry ::= SEQUENCE { cpqiScsiIntrPortalInstIndex Gauge, cpqiScsiIntrPortalPortalIndex Gauge, cpqiScsiIntrPortalTag INTEGER } cpqiScsiIntrPortalInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiIntrPortalAttributesEntry 1 } cpqiScsiIntrPortalPortalIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular transport endpoint within this iSCSI instance." ::= { cpqiScsiIntrPortalAttributesEntry 2 } cpqiScsiIntrPortalTag OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The portal's aggregation tag when the portal is used as an initiator portal. Multiple-connection sessions may be aggregated over portals sharing an identical aggregation tag." ::= { cpqiScsiIntrPortalAttributesEntry 3 } -- **************************************************************************** -- cpqiScsiNodeAttributesTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiNode Group (1.3.6.1.4.1.232.169.2.6) -- cpqiScsiNodeAttributesTable (1.3.6.1.4.1.232.169.2.6.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiNodeAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiNodeAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI nodes belonging to each iSCSI instance present on the local system. An iSCSI node can act as an initiator, a target, or both." ::= { cpqiScsiNode 1 } cpqiScsiNodeAttributesEntry OBJECT-TYPE SYNTAX IscsiNodeAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI node." INDEX { cpqiScsiNodeInstIndex, cpqiScsiNodeNodeIndex } ::= { cpqiScsiNodeAttributesTable 1 } IscsiNodeAttributesEntry ::= SEQUENCE { cpqiScsiNodeInstIndex Gauge, cpqiScsiNodeNodeIndex Gauge, cpqiScsiNodeName DisplayString, cpqiScsiNodeAlias DisplayString, cpqiScsiNodeRoles OCTET STRING, cpqiScsiNodeTransportType OBJECT IDENTIFIER, cpqiScsiNodeInitialR2T INTEGER, cpqiScsiNodeImmediateData INTEGER, cpqiScsiNodeMaxOutstandingR2T INTEGER, cpqiScsiNodeFirstBurstLength INTEGER, cpqiScsiNodeMaxBurstLength INTEGER, cpqiScsiNodeMaxConnections INTEGER, cpqiScsiNodeDataSequenceInOrder INTEGER, cpqiScsiNodeDataPDUInOrder INTEGER, cpqiScsiNodeDefaultTime2Wait INTEGER, cpqiScsiNodeDefaultTime2Retain INTEGER, cpqiScsiNodeErrorRecoveryLevel INTEGER } cpqiScsiNodeInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiNodeAttributesEntry 1 } cpqiScsiNodeNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiNodeAttributesEntry 2 } cpqiScsiNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A character string that is a globally unique identifier for this iSCSI node. The node name is independent of the location of the node, and can be resolved into a set of addresses through various discovery services." ::= { cpqiScsiNodeAttributesEntry 3 } cpqiScsiNodeAlias OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator or target node at the remote end of the connection during a Login Request or Response message. This string is not used as an identifier, but can be displayed by the system's user interface in a list of initiators and/or targets to which it is connected. If no alias is configured, this object is a zero-length string." ::= { cpqiScsiNodeAttributesEntry 4 } cpqiScsiNodeRoles OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) -- BITS are: -- targetTypeNode(0) -- initiatorTypeNode(1) ACCESS read-only STATUS mandatory DESCRIPTION "A node can operate in one or both of two roles: a target role and/or an initiator role. If the node will operate in both roles, both bits must be set. When a new cpqiScsiNodeAttributesEntry is to be created, the agent should use this object as a hint for the creation of a new cpqiScsiTargetAttributesEntry and/or cpqiScsiInitiatorAttributesEntry." ::= { cpqiScsiNodeAttributesEntry 5 } cpqiScsiNodeTransportType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A pointer to the corresponding scsiTrnspt object in the SCSI MIB (which in turn points to this iSCSI node) allowing management stations to locate the SCSI-level Device that is represented by this cpqiScsiNode." REFERENCE "SCSI-MIB" ::= { cpqiScsiNodeAttributesEntry 6 } cpqiScsiNodeInitialR2T OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the InitialR2T preference for this node: True = YES, False = will try to negotiate NO, will accept YES " DEFVAL { true } ::= { cpqiScsiNodeAttributesEntry 7 } cpqiScsiNodeImmediateData OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates ImmediateData preference for this node True = YES (but will accept NO), False = NO " DEFVAL { true } ::= { cpqiScsiNodeAttributesEntry 8 } cpqiScsiNodeMaxOutstandingR2T OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of outstanding R2Ts allowed per task." DEFVAL { 1 } ::= { cpqiScsiNodeAttributesEntry 9 } cpqiScsiNodeFirstBurstLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length (bytes) supported for unsolicited data to/from this node." DEFVAL { 65536 } ::= { cpqiScsiNodeAttributesEntry 10 } cpqiScsiNodeMaxBurstLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs." DEFVAL { 262144 } ::= { cpqiScsiNodeAttributesEntry 11 } cpqiScsiNodeMaxConnections OBJECT-TYPE SYNTAX INTEGER(1..65535) -- Units -- connections ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of connections allowed in each session to and/or from this node." DEFVAL { 1 } ::= { cpqiScsiNodeAttributesEntry 12 } cpqiScsiNodeDataSequenceInOrder OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The DataSequenceInOrder preference of this node. False (=No) indicates that iSCSI data PDU sequences may be transferred in any order. True (=Yes) indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery." DEFVAL { true } ::= { cpqiScsiNodeAttributesEntry 13 } cpqiScsiNodeDataPDUInOrder OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The DataPDUInOrder preference of this node. False (=No) indicates that iSCSI data PDUs within sequences may be in any order. True (=Yes) indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs." DEFVAL { true } ::= { cpqiScsiNodeAttributesEntry 14 } cpqiScsiNodeDefaultTime2Wait OBJECT-TYPE SYNTAX INTEGER(0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The DefaultTime2Wait preference of this node. This is the minimum time, in seconds, to wait before attempting an explicit/implicit logout or active task reassignment after an unexpected connection termination or a connection reset." DEFVAL { 2 } ::= { cpqiScsiNodeAttributesEntry 15 } cpqiScsiNodeDefaultTime2Retain OBJECT-TYPE SYNTAX INTEGER(0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The DefaultTime2Retain preference of this node. This is the maximum time, in seconds after an initial wait (Time2Wait), before which an active task reassignment is still possible after an unexpected connection termination or a connection reset." DEFVAL { 20 } ::= { cpqiScsiNodeAttributesEntry 16 } cpqiScsiNodeErrorRecoveryLevel OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The ErrorRecoveryLevel preference of this node. Currently, only 0-2 are valid. This object is designed to accommodate future error recover levels. Higher error recovery levels imply support in addition to support for the lower error level functions. In other words, error level 2 implies support for levels 0-1, since those functions are subsets of error level 2." DEFVAL { 0 } ::= { cpqiScsiNodeAttributesEntry 17 } -- **************************************************************************** -- cpqiScsiTargetAttributesTable -- ========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiTarget Group (1.3.6.1.4.1.232.169.2.7) -- cpqiScsiTargetAttributesTable (1.3.6.1.4.1.232.169.2.7.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiTargetAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular node that can take on a target role." ::= { cpqiScsiTarget 1 } cpqiScsiTargetAttributesEntry OBJECT-TYPE SYNTAX IscsiTargetAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular target." INDEX { cpqiScsiTgtInstIndex, cpqiScsiTgtNodeIndex } ::= { cpqiScsiTargetAttributesTable 1 } IscsiTargetAttributesEntry ::= SEQUENCE { cpqiScsiTgtInstIndex Gauge, cpqiScsiTgtNodeIndex Gauge, cpqiScsiTgtLoginFailures Counter, cpqiScsiTgtLastFailureTime TimeTicks, cpqiScsiTgtLastFailureType OBJECT IDENTIFIER, cpqiScsiTgtLastIntrFailureName DisplayString, cpqiScsiTgtLastIntrFailureAddrType INTEGER, cpqiScsiTgtLastIntrFailureAddr OCTET STRING } cpqiScsiTgtInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiTargetAttributesEntry 1 } cpqiScsiTgtNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiTargetAttributesEntry 2 } cpqiScsiTgtLoginFailures OBJECT-TYPE SYNTAX Counter -- Units -- failed login attempts ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a login attempt to this local target has failed." ::= { cpqiScsiTargetAttributesEntry 3 } cpqiScsiTgtLastFailureTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The timestamp of the most recent failure of a login attempt to this target. A value of zero indicates that no such failures have occurred." ::= { cpqiScsiTargetAttributesEntry 4 } cpqiScsiTgtLastFailureType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of the most recent failure of a login attempt to this target, represented as the OID of the counter object in cpqiScsiTargetLoginStatsTable for which the relevant instance was incremented. A value of 0.0 indicates a type which is not represented by any of the counters in cpqiScsiTargetLoginStatsTable." ::= { cpqiScsiTargetAttributesEntry 5 } cpqiScsiTgtLastIntrFailureName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string giving the name of the initiator that failed the last login attempt." ::= { cpqiScsiTargetAttributesEntry 6 } cpqiScsiTgtLastIntrFailureAddrType OBJECT-TYPE SYNTAX INTEGER { -- unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in cpqiScsiTgtLastIntrFailureAddr." DEFVAL { ipv4 } ::= { cpqiScsiTargetAttributesEntry 7 } cpqiScsiTgtLastIntrFailureAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "An Internet Network Address giving the host address of the initiator that failed the last login attempt." ::= { cpqiScsiTargetAttributesEntry 8 } -- **************************************************************************** -- cpqiScsiTargetLoginStatsTable -- ========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiTarget Group (1.3.6.1.4.1.232.169.2.7) -- cpqiScsiTargetLoginStatsTable (1.3.6.1.4.1.232.169.2.7.2) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiTargetLoginStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of counters which keep a record of the results of initiators' login attempts to this target." ::= { cpqiScsiTarget 2 } cpqiScsiTargetLoginStatsEntry OBJECT-TYPE SYNTAX IscsiTargetLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters for each result of a login attempt to this target." INDEX { cpqiScsiTgtLoginInstIndex, cpqiScsiTgtLoginNodeIndex } -- Augments cpqiScsiTargetAttributesEntry ::= { cpqiScsiTargetLoginStatsTable 1 } IscsiTargetLoginStatsEntry ::= SEQUENCE { cpqiScsiTgtLoginInstIndex Gauge, cpqiScsiTgtLoginNodeIndex Gauge, cpqiScsiTgtLoginAccepts Counter, cpqiScsiTgtLoginOtherFails Counter, cpqiScsiTgtLoginRedirects Counter, cpqiScsiTgtLoginAuthorizeFails Counter, cpqiScsiTgtLoginAuthenticateFails Counter, cpqiScsiTgtLoginNegotiateFails Counter } cpqiScsiTgtLoginInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiTargetLoginStatsEntry 1 } cpqiScsiTgtLoginNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiTargetLoginStatsEntry 2 } cpqiScsiTgtLoginAccepts OBJECT-TYPE SYNTAX Counter -- Units -- successful logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0000, Accept Login, transmitted by this target." ::= { cpqiScsiTargetLoginStatsEntry 3 } cpqiScsiTgtLoginOtherFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The number of Login Response PDUs which were transmitted by this target, and which were not counted by any other object in the row." ::= { cpqiScsiTargetLoginStatsEntry 4 } cpqiScsiTgtLoginRedirects OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x01, Redirection, transmitted by this target." ::= { cpqiScsiTargetLoginStatsEntry 5 } cpqiScsiTgtLoginAuthorizeFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0202, Forbidden Target, transmitted by this target. If this counter is incremented, an cpqiScsiTgtLoginFailure notification should be generated." ::= { cpqiScsiTargetLoginStatsEntry 6 } cpqiScsiTgtLoginAuthenticateFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0201, Authentication Failed, transmitted by this target If this counter is incremented, an cpqiScsiTgtLoginFailure notification should be generated." ::= { cpqiScsiTargetLoginStatsEntry 7 } cpqiScsiTgtLoginNegotiateFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a target has effectively refused a login because the parameter negotiation failed. [Ed. While this situation can occur, the exact mechanism is as yet undefined in the iSCSI Protocol Spec.] If this counter is incremented, an cpqiScsiTgtLoginFailure notification should be generated." ::= { cpqiScsiTargetLoginStatsEntry 8 } -- **************************************************************************** -- cpqiScsiTargetLogoutStatsTable -- ========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiTarget Group (1.3.6.1.4.1.232.169.2.7) -- cpqiScsiTargetLogoutStatsTable (1.3.6.1.4.1.232.169.2.7.3) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiTargetLogoutStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTargetLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "When a target receives a Logout command, it responds with a Logout Response that carries a status code. This table contains counters for both normal and abnormal logout requests received by this target." ::= { cpqiScsiTarget 3 } cpqiScsiTargetLogoutStatsEntry OBJECT-TYPE SYNTAX IscsiTargetLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of Logout Response PDUs that were received by this target." INDEX { cpqiScsiTgtLogoutInstIndex, cpqiScsiTgtLogoutNodeIndex } -- Augments cpqiScsiTargetAttributesEntry ::= { cpqiScsiTargetLogoutStatsTable 1 } IscsiTargetLogoutStatsEntry ::= SEQUENCE { cpqiScsiTgtLogoutInstIndex Gauge, cpqiScsiTgtLogoutNodeIndex Gauge, cpqiScsiTgtLogoutNormals Counter, cpqiScsiTgtLogoutOthers Counter } cpqiScsiTgtLogoutInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiTargetLogoutStatsEntry 1 } cpqiScsiTgtLogoutNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiTargetLogoutStatsEntry 2 } cpqiScsiTgtLogoutNormals OBJECT-TYPE SYNTAX Counter -- Units -- normal logouts ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs received by this target, with reason code 0 (closes the session)." ::= { cpqiScsiTargetLogoutStatsEntry 3 } cpqiScsiTgtLogoutOthers OBJECT-TYPE SYNTAX Counter -- Units -- abnormal logouts ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs received by this target, with any status code other than 0." ::= { cpqiScsiTargetLogoutStatsEntry 4 } -- **************************************************************************** -- cpqiScsiTgtAuthAttributesTable -- =========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiTgtAuthorization Group (1.3.6.1.4.1.232.169.2.8) -- cpqiScsiTgtAuthAttributesTable (1.3.6.1.4.1.232.169.2.8.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiTgtAuthAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiTgtAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of initiator identities that are authorized to access each target node within each iSCSI instance present on the local system." ::= { cpqiScsiTgtAuthorization 1 } cpqiScsiTgtAuthAttributesEntry OBJECT-TYPE SYNTAX IscsiTgtAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular target node's authorized initiator identity." INDEX { cpqiScsiTgtAuthInstIndex, cpqiScsiTgtAuthNodeIndex, cpqiScsiTgtAuthIndex } ::= { cpqiScsiTgtAuthAttributesTable 1 } IscsiTgtAuthAttributesEntry ::= SEQUENCE { cpqiScsiTgtAuthInstIndex Gauge, cpqiScsiTgtAuthNodeIndex Gauge, cpqiScsiTgtAuthIndex Gauge, cpqiScsiTgtAuthRowStatus INTEGER, cpqiScsiTgtAuthIdentity OBJECT IDENTIFIER } cpqiScsiTgtAuthInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiTgtAuthAttributesEntry 1 } cpqiScsiTgtAuthNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiTgtAuthAttributesEntry 2 } cpqiScsiTgtAuthIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular target's authorized initiator identity within an iSCSI instance present on the local system." ::= { cpqiScsiTgtAuthAttributesEntry 3 } cpqiScsiTgtAuthRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the row." ::= { cpqiScsiTgtAuthAttributesEntry 4 } cpqiScsiTgtAuthIdentity OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "A pointer to the corresponding IPS-AUTH MIB user entry that will be allowed to access this iSCSI target." REFERENCE "IPS-AUTH MIB" ::= { cpqiScsiTgtAuthAttributesEntry 5 } -- **************************************************************************** -- cpqiScsiInitiatorAttributesTable -- ============================= -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInitiator Group (1.3.6.1.4.1.232.169.2.9) -- cpqiScsiInitiatorAttributesTable (1.3.6.1.4.1.232.169.2.9.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiInitiatorAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of iSCSI nodes that can take on an initiator role, belonging to each iSCSI instance present on the local system." ::= { cpqiScsiInitiator 1 } cpqiScsiInitiatorAttributesEntry OBJECT-TYPE SYNTAX IscsiInitiatorAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular iSCSI node that has initiator capabilities." INDEX { cpqiScsiIntrInstIndex, cpqiScsiIntrNodeIndex } ::= { cpqiScsiInitiatorAttributesTable 1 } IscsiInitiatorAttributesEntry ::= SEQUENCE { cpqiScsiIntrInstIndex Gauge, cpqiScsiIntrNodeIndex Gauge, cpqiScsiIntrLoginFailures Counter, cpqiScsiIntrLastFailureTime TimeTicks, cpqiScsiIntrLastFailureType OBJECT IDENTIFIER, cpqiScsiIntrLastTgtFailureName DisplayString, cpqiScsiIntrLastTgtFailureAddrType INTEGER, cpqiScsiIntrLastTgtFailureAddr OCTET STRING } cpqiScsiIntrInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiInitiatorAttributesEntry 1 } cpqiScsiIntrNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiInitiatorAttributesEntry 2 } cpqiScsiIntrLoginFailures OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "This object counts the number of times a login attempt from this local initiator has failed." ::= { cpqiScsiInitiatorAttributesEntry 3 } cpqiScsiIntrLastFailureTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The timestamp of the most recent failure of a login attempt from this initiator. A value of zero indicates that no such failures have occurred." ::= { cpqiScsiInitiatorAttributesEntry 4 } cpqiScsiIntrLastFailureType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of the most recent failure of a login attempt from this initiator, represented as the OID of the counter object in cpqiScsiInitiatorLoginStatsTable for which the relevant instance was incremented. A value of 0.0 indicates a type which is not represented by any of the counters in cpqiScsiInitiatorLoginStatsTable." ::= { cpqiScsiInitiatorAttributesEntry 5 } cpqiScsiIntrLastTgtFailureName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string giving the name of the target that failed the last login attempt." ::= { cpqiScsiInitiatorAttributesEntry 6 } cpqiScsiIntrLastTgtFailureAddrType OBJECT-TYPE SYNTAX INTEGER { -- unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in cpqiScsiIntrLastTgtFailureAddr." DEFVAL { ipv4 } ::= { cpqiScsiInitiatorAttributesEntry 7 } cpqiScsiIntrLastTgtFailureAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "An Internet Network Address giving the host address of the target that failed the last login attempt." ::= { cpqiScsiInitiatorAttributesEntry 8 } -- **************************************************************************** -- cpqiScsiInitiatorLoginStatsTable -- ============================= -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInitiator Group (1.3.6.1.4.1.232.169.2.9) -- cpqiScsiInitiatorLoginStatsTable (1.3.6.1.4.1.232.169.2.9.2) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiInitiatorLoginStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of counters which keep track of the results of this initiator's login attempts." ::= { cpqiScsiInitiator 2 } cpqiScsiInitiatorLoginStatsEntry OBJECT-TYPE SYNTAX IscsiInitiatorLoginStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of each result of this initiator's login attempts." INDEX { cpqiScsiIntrLoginInstIndex, cpqiScsiIntrLoginNodeIndex } -- Augments cpqiScsiInitiatorAttributesEntry ::= { cpqiScsiInitiatorLoginStatsTable 1 } IscsiInitiatorLoginStatsEntry ::= SEQUENCE { cpqiScsiIntrLoginInstIndex Gauge, cpqiScsiIntrLoginNodeIndex Gauge, cpqiScsiIntrLoginAcceptRsps Counter, cpqiScsiIntrLoginOtherFailRsps Counter, cpqiScsiIntrLoginRedirectRsps Counter, cpqiScsiIntrLoginAuthFailRsps Counter, cpqiScsiIntrLoginAuthenticateFails Counter, cpqiScsiIntrLoginNegotiateFails Counter } cpqiScsiIntrLoginInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiInitiatorLoginStatsEntry 1 } cpqiScsiIntrLoginNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiInitiatorLoginStatsEntry 2 } cpqiScsiIntrLoginAcceptRsps OBJECT-TYPE SYNTAX Counter -- Units -- successful logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status 0x0000, Accept Login, received by this initiator." ::= { cpqiScsiInitiatorLoginStatsEntry 3 } cpqiScsiIntrLoginOtherFailRsps OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs received by this initiator with any status code not counted in the objects below." ::= { cpqiScsiInitiatorLoginStatsEntry 4 } cpqiScsiIntrLoginRedirectRsps OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x01, Redirection, received by this initiator." ::= { cpqiScsiInitiatorLoginStatsEntry 5 } cpqiScsiIntrLoginAuthFailRsps OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The count of Login Response PDUs with status class 0x201, Authentication Failed, received by this initiator." ::= { cpqiScsiInitiatorLoginStatsEntry 6 } cpqiScsiIntrLoginAuthenticateFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the initiator has aborted a login because the target could not be authenticated. No response is generated. If this counter is incremented, an cpqiScsiIntrLoginFailure notification should be generated." ::= { cpqiScsiInitiatorLoginStatsEntry 7 } cpqiScsiIntrLoginNegotiateFails OBJECT-TYPE SYNTAX Counter -- Units -- failed logins ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the initiator has aborted a login because parameter negotiation with the target failed. No response is generated. If this counter is incremented, an cpqiScsiIntrLoginFailure notification should be generated." ::= { cpqiScsiInitiatorLoginStatsEntry 8 } -- **************************************************************************** -- cpqiScsiInitiatorLogoutStatsTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiInitiator Group (1.3.6.1.4.1.232.169.2.9) -- cpqiScsiInitiatorLogoutStatsTable (1.3.6.1.4.1.232.169.2.9.3) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiInitiatorLogoutStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiInitiatorLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "When an initiator attempts send a Logout command, the target responds with a Logout Response that carries a status code. This table contains a list of counters of Logout Response PDUs of each status code, that were received by each initiator belonging to this iSCSI instance present on this system." ::= { cpqiScsiInitiator 3 } cpqiScsiInitiatorLogoutStatsEntry OBJECT-TYPE SYNTAX IscsiInitiatorLogoutStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing counters of Logout Response PDUs of each status code, that were generated by this initiator." INDEX { cpqiScsiIntrLogoutInstIndex, cpqiScsiIntrLogoutNodeIndex } -- Augments cpqiScsiInitiatorAttributesEntry ::= { cpqiScsiInitiatorLogoutStatsTable 1 } IscsiInitiatorLogoutStatsEntry ::= SEQUENCE { cpqiScsiIntrLogoutInstIndex Gauge, cpqiScsiIntrLogoutNodeIndex Gauge, cpqiScsiIntrLogoutNormals Counter, cpqiScsiIntrLogoutOthers Counter } cpqiScsiIntrLogoutInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiInitiatorLogoutStatsEntry 1 } cpqiScsiIntrLogoutNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiInitiatorLogoutStatsEntry 2 } cpqiScsiIntrLogoutNormals OBJECT-TYPE SYNTAX Counter -- Units -- normal logouts ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs generated by this initiator with reason code 0 (closes the session)." ::= { cpqiScsiInitiatorLogoutStatsEntry 3 } cpqiScsiIntrLogoutOthers OBJECT-TYPE SYNTAX Counter -- Units -- abnormal logouts ACCESS read-only STATUS mandatory DESCRIPTION "The count of Logout Command PDUs generated by this initiator with any status code other than 0." ::= { cpqiScsiInitiatorLogoutStatsEntry 4 } -- **************************************************************************** -- cpqiScsiIntrAuthAttributesTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiIntrAuthorization Group (1.3.6.1.4.1.232.169.2.10) -- cpqiScsiIntrAuthAttributesTable (1.3.6.1.4.1.232.169.2.10.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiIntrAuthAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiIntrAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of target identities which each initiator on the local system may access." ::= { cpqiScsiIntrAuthorization 1 } cpqiScsiIntrAuthAttributesEntry OBJECT-TYPE SYNTAX IscsiIntrAuthAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular initiator node's authorized target identity." INDEX { cpqiScsiIntrAuthInstIndex, cpqiScsiIntrAuthNodeIndex, cpqiScsiIntrAuthIndex } ::= { cpqiScsiIntrAuthAttributesTable 1 } IscsiIntrAuthAttributesEntry ::= SEQUENCE { cpqiScsiIntrAuthInstIndex Gauge, cpqiScsiIntrAuthNodeIndex Gauge, cpqiScsiIntrAuthIndex Gauge, cpqiScsiIntrAuthRowStatus INTEGER, cpqiScsiIntrAuthIdentity OBJECT IDENTIFIER } cpqiScsiIntrAuthInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiIntrAuthAttributesEntry 1 } cpqiScsiIntrAuthNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiIntrAuthAttributesEntry 2 } cpqiScsiIntrAuthIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular initiator node's authorized target identity within an iSCSI instance present on the local system." ::= { cpqiScsiIntrAuthAttributesEntry 3 } cpqiScsiIntrAuthRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the row." ::= { cpqiScsiIntrAuthAttributesEntry 4 } cpqiScsiIntrAuthIdentity OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A pointer to the corresponding IPS-AUTH MIB user entry to which this initiator node should attempt to establish an iSCSI session." REFERENCE "IPS-AUTH MIB" ::= { cpqiScsiIntrAuthAttributesEntry 5 } -- **************************************************************************** -- cpqiScsiSessionAttributesTable -- =========================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiSession Group (1.3.6.1.4.1.232.169.2.11) -- cpqiScsiSessionAttributesTable (1.3.6.1.4.1.232.169.2.11.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiSessionAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of sessions belonging to each iSCSI instance present on the system." ::= { cpqiScsiSession 1 } cpqiScsiSessionAttributesEntry OBJECT-TYPE SYNTAX IscsiSessionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular session. If this session is a discovery session which is not attached to any particular node, the cpqiScsiNodeIndex will be zero." INDEX { cpqiScsiSsnInstIndex, cpqiScsiSsnNodeIndex, cpqiScsiSsnIndex } ::= { cpqiScsiSessionAttributesTable 1 } IscsiSessionAttributesEntry ::= SEQUENCE { cpqiScsiSsnInstIndex Gauge, cpqiScsiSsnNodeIndex Gauge, cpqiScsiSsnIndex Gauge, cpqiScsiSsnDirection INTEGER, cpqiScsiSsnInitiatorName DisplayString, cpqiScsiSsnTargetName DisplayString, cpqiScsiSsnTSIH INTEGER, cpqiScsiSsnISID OCTET STRING, cpqiScsiSsnInitiatorAlias DisplayString, cpqiScsiSsnTargetAlias DisplayString, cpqiScsiSsnInitialR2T INTEGER, cpqiScsiSsnImmediateData INTEGER, cpqiScsiSsnType INTEGER, cpqiScsiSsnMaxOutstandingR2T INTEGER, cpqiScsiSsnFirstBurstLength INTEGER, cpqiScsiSsnMaxBurstLength INTEGER, cpqiScsiSsnConnectionNumber Gauge, cpqiScsiSsnAuthIdentity OBJECT IDENTIFIER, cpqiScsiSsnDataSequenceInOrder INTEGER, cpqiScsiSsnDataPDUInOrder INTEGER, cpqiScsiSsnErrorRecoveryLevel INTEGER, cpqiScsiSessionId DisplayString } cpqiScsiSsnInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiSessionAttributesEntry 1 } cpqiScsiSsnNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiSessionAttributesEntry 2 } cpqiScsiSsnIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular session within an iSCSI instance present on the local system." ::= { cpqiScsiSessionAttributesEntry 3 } cpqiScsiSsnDirection OBJECT-TYPE SYNTAX INTEGER { inboundSession(1), outboundSession(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Direction of iSCSI session: InboundSession - session is established from an external initiator to a target within this iSCSI instance. OutboundSession - session is established from an initiator within this iSCSI instance to an external target." ::= { cpqiScsiSessionAttributesEntry 4 } cpqiScsiSsnInitiatorName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string describing the name of initiator node of the iscsi session. This field will be a null (size 0) string if this session is a discovery session that does not specify a particular initiator." ::= { cpqiScsiSessionAttributesEntry 5 } cpqiScsiSsnTargetName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A string describing the name of target node of the iscsi session. This field will be a null (size 0) string if this session is a discovery session that does not specify a particular target." ::= { cpqiScsiSessionAttributesEntry 6 } cpqiScsiSsnTSIH OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The target-defined identification handle for this session." ::= { cpqiScsiSessionAttributesEntry 7 } cpqiScsiSsnISID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The initiator-defined portion of the iSCSI Session ID." ::= { cpqiScsiSessionAttributesEntry 8 } cpqiScsiSsnInitiatorAlias OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string that gives the alias communicated by the initiator end of the session during the login phase. If no alias exists, the value is a zero-length string." ::= { cpqiScsiSessionAttributesEntry 9 } cpqiScsiSsnTargetAlias OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "An octet string that gives the alias communicated by the target end of the session during the login phase. If no alias exists, the value is a zero-length string." ::= { cpqiScsiSessionAttributesEntry 10 } cpqiScsiSsnInitialR2T OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If set to true, indicates that the initiator must wait for an R2T before sending to the target. If set to false, the initiator may send data immediately, within limits set by cpqiScsiSsnFirstBurstLength and the expected data transfer length of the request. Default is true." ::= { cpqiScsiSessionAttributesEntry 11 } cpqiScsiSsnImmediateData OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the initiator and target have agreed to support immediate data on this session." ::= { cpqiScsiSessionAttributesEntry 12 } cpqiScsiSsnType OBJECT-TYPE SYNTAX INTEGER { normalSession(1), discoverySession(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of iSCSI session: normalSession - session is a normal iSCSI session discoverySession - session is being used only for discovery." DEFVAL { normalSession } ::= { cpqiScsiSessionAttributesEntry 13 } cpqiScsiSsnMaxOutstandingR2T OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of outstanding request-to-transmit (R2T)s per task within this session." ::= { cpqiScsiSessionAttributesEntry 14 } cpqiScsiSsnFirstBurstLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The maximum length supported for unsolicited data sent within this session." DEFVAL { 65536 } ::= { cpqiScsiSessionAttributesEntry 15 } cpqiScsiSsnMaxBurstLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of bytes which can be sent within a single sequence of Data-In or Data-Out PDUs." DEFVAL { 262144 } ::= { cpqiScsiSessionAttributesEntry 16 } cpqiScsiSsnConnectionNumber OBJECT-TYPE SYNTAX Gauge -- Units -- connections ACCESS read-only STATUS mandatory DESCRIPTION "The number of transport protocol connections that currently belong to this session." ::= { cpqiScsiSessionAttributesEntry 17 } cpqiScsiSsnAuthIdentity OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a row in the IPS-AUTH MIB which identifies the authentication method being used on this session, as communicated during the login phase." REFERENCE "IPS-AUTH MIB" ::= { cpqiScsiSessionAttributesEntry 18 } cpqiScsiSsnDataSequenceInOrder OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery." ::= { cpqiScsiSessionAttributesEntry 19 } cpqiScsiSsnDataPDUInOrder OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "False indicates that iSCSI data PDUs within sequences may be in any order. True indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs. Default is true." ::= { cpqiScsiSessionAttributesEntry 20 } cpqiScsiSsnErrorRecoveryLevel OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The level of error recovery negotiated between the initiator and the target. Higher numbers represent more detailed recovery schemes." ::= { cpqiScsiSessionAttributesEntry 21 } cpqiScsiSessionId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A string describing the session ID of this iscsi session." ::= { cpqiScsiSessionAttributesEntry 22 } -- **************************************************************************** -- cpqiScsiSessionStatsTable -- ====================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiSession Group (1.3.6.1.4.1.232.169.2.11) -- cpqiScsiSessionStatsTable (1.3.6.1.4.1.232.169.2.11.2) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of general iSCSI traffic counters for each of the sessions present on the system." ::= { cpqiScsiSession 2 } cpqiScsiSessionStatsEntry OBJECT-TYPE SYNTAX IscsiSessionStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing general iSCSI traffic counters for a particular session." INDEX { cpqiScsiSsnStatInstIndex, cpqiScsiSsnStatNodeIndex, cpqiScsiSsnSessionIndex } -- Augments cpqiScsiSessionAttributesEntry ::= { cpqiScsiSessionStatsTable 1 } IscsiSessionStatsEntry ::= SEQUENCE { cpqiScsiSsnStatInstIndex Gauge, cpqiScsiSsnStatNodeIndex Gauge, cpqiScsiSsnSessionIndex Gauge, cpqiScsiSsnCmdPDUs Counter, cpqiScsiSsnRspPDUs Counter, cpqiScsiSsnTxDataOctets Counter, cpqiScsiSsnRxDataOctets Counter, cpqiScsiSsnLCTxDataOctets Counter, cpqiScsiSsnLCRxDataOctets Counter } cpqiScsiSsnStatInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiSessionStatsEntry 1 } cpqiScsiSsnStatNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiSessionStatsEntry 2 } cpqiScsiSsnSessionIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular session within an iSCSI instance present on the local system." ::= { cpqiScsiSessionStatsEntry 3 } cpqiScsiSsnCmdPDUs OBJECT-TYPE SYNTAX Counter -- Units -- PDUs ACCESS read-only STATUS mandatory DESCRIPTION "The count of Command PDUs transferred on this session." ::= { cpqiScsiSessionStatsEntry 4 } cpqiScsiSsnRspPDUs OBJECT-TYPE SYNTAX Counter -- Units -- PDUs ACCESS read-only STATUS mandatory DESCRIPTION "The count of Response PDUs transferred on this session." ::= { cpqiScsiSessionStatsEntry 5 } cpqiScsiSsnTxDataOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "The cpqiScsiSsnTxDataOctets and the cpqiScsiSsnLCTxDataOctets together shows the count of data octets that were transmitted by the local iSCSI node on this session. The actual count of data octets equals the cpqiScsiSsnTxDataOctets times 2^32 plus the cpqiScsiSsnLCTxDataOctets." ::= { cpqiScsiSessionStatsEntry 6 } cpqiScsiSsnRxDataOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "The cpqiScsiSsnRxDataOctets and the cpqiScsiSsnLCRxDataOctets together shows the count of data octets that were received by the local iSCSI node on this session. The actual count of data octets equals the cpqiScsiSsnRxDataOctets times 2^32 plus the cpqiScsiSsnLCRxDataOctets." ::= { cpqiScsiSessionStatsEntry 7 } cpqiScsiSsnLCTxDataOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "A Low Capacity shadow object of cpqiScsiSsnTxDataOctets for those systems that don't support Counter64." ::= { cpqiScsiSessionStatsEntry 8 } cpqiScsiSsnLCRxDataOctets OBJECT-TYPE SYNTAX Counter -- Units -- octets ACCESS read-only STATUS mandatory DESCRIPTION "A Low Capacity shadow object of cpqiScsiSsnRxDataOctets for those systems that don't support Counter64." ::= { cpqiScsiSessionStatsEntry 9 } -- **************************************************************************** -- cpqiScsiSessionCxnErrorStatsTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiSession Group (1.3.6.1.4.1.232.169.2.11) -- cpqiScsiSessionCxnErrorStatsTable (1.3.6.1.4.1.232.169.2.11.3) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiSessionCxnErrorStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionCxnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of error counters for each of the sessions present on this system." ::= { cpqiScsiSession 3 } cpqiScsiSessionCxnErrorStatsEntry OBJECT-TYPE SYNTAX IscsiSessionCxnErrorStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing error counters for a particular session." INDEX { cpqiScsiSsnCxnInstIndex, cpqiScsiSsnCxnNodeIndex, cpqiScsiSsnCxnIndex } -- Augments cpqiScsiSessionAttributesEntry ::= { cpqiScsiSessionCxnErrorStatsTable 1 } IscsiSessionCxnErrorStatsEntry ::= SEQUENCE { cpqiScsiSsnCxnInstIndex Gauge, cpqiScsiSsnCxnNodeIndex Gauge, cpqiScsiSsnCxnIndex Gauge, cpqiScsiSsnCxnDigestErrors Counter, cpqiScsiSsnCxnTimeoutErrors Counter } cpqiScsiSsnCxnInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiSessionCxnErrorStatsEntry 1 } cpqiScsiSsnCxnNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiSessionCxnErrorStatsEntry 2 } cpqiScsiSsnCxnIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular session within an iSCSI instance present on the local system." ::= { cpqiScsiSessionCxnErrorStatsEntry 3 } cpqiScsiSsnCxnDigestErrors OBJECT-TYPE SYNTAX Counter -- Units -- PDUs ACCESS read-only STATUS mandatory DESCRIPTION "The count of PDUs which were received on the session and contained header or data digest errors." ::= { cpqiScsiSessionCxnErrorStatsEntry 4 } cpqiScsiSsnCxnTimeoutErrors OBJECT-TYPE SYNTAX Counter -- Units -- sequences ACCESS read-only STATUS mandatory DESCRIPTION "The count of connections within this session which have been terminated due to timeout." ::= { cpqiScsiSessionCxnErrorStatsEntry 5 } -- **************************************************************************** -- cpqiScsiConnectionAttributesTable -- ============================== -- -- The iSCSI MIB (1.3.6.1.4.1.232.169) -- cpqiScsiObjects Group (1.3.6.1.4.1.232.169.2) -- cpqiScsiConnection Group (1.3.6.1.4.1.232.169.2.12) -- cpqiScsiConnectionAttributesTable (1.3.6.1.4.1.232.169.2.12.1) -- This group describes the interface to the -- -- Implementation of the group is mandatory for all -- agents that support the iSCSI MIB. -- -- **************************************************************************** cpqiScsiConnectionAttributesTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiConnectionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of connections belonging to each iSCSI instance present on the system." ::= { cpqiScsiConnection 1 } cpqiScsiConnectionAttributesEntry OBJECT-TYPE SYNTAX IscsiConnectionAttributesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) containing management information applicable to a particular connection." INDEX { cpqiScsiCxnAttrInstIndex, cpqiScsiCxnAttrNodeIndex, cpqiScsiCxnAttrSessionIndex, cpqiScsiCxnAttrIndex } ::= { cpqiScsiConnectionAttributesTable 1 } IscsiConnectionAttributesEntry ::= SEQUENCE { cpqiScsiCxnAttrInstIndex Gauge, cpqiScsiCxnAttrNodeIndex Gauge, cpqiScsiCxnAttrSessionIndex Gauge, cpqiScsiCxnAttrIndex Gauge, cpqiScsiCxnAttrCid INTEGER, cpqiScsiCxnAttrState INTEGER, cpqiScsiCxnAttrLocalAddrType INTEGER, cpqiScsiCxnAttrLocalAddr OCTET STRING, cpqiScsiCxnAttrProtocol INTEGER, cpqiScsiCxnAttrLocalPort Gauge, cpqiScsiCxnAttrRemoteAddrType INTEGER, cpqiScsiCxnAttrRemoteAddr OCTET STRING, cpqiScsiCxnAttrRemotePort Gauge, cpqiScsiCxnAttrMaxRecvDataSegLength INTEGER, cpqiScsiCxnAttrMaxXmitDataSegLength INTEGER, cpqiScsiCxnAttrHeaderIntegrity INTEGER, cpqiScsiCxnAttrDataIntegrity INTEGER, cpqiScsiCxnAttrRecvMarker INTEGER, cpqiScsiCxnAttrSendMarker INTEGER, cpqiScsiCxnAttrVersionActive INTEGER } cpqiScsiCxnAttrInstIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular iSCSI instance." ::= { cpqiScsiConnectionAttributesEntry 1 } cpqiScsiCxnAttrNodeIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular node within an iSCSI instance present on the local system." ::= { cpqiScsiConnectionAttributesEntry 2 } cpqiScsiCxnAttrSessionIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular session within an iSCSI instance present on the local system." ::= { cpqiScsiConnectionAttributesEntry 3 } cpqiScsiCxnAttrIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer used to uniquely identify a particular connection of a particular session within an iSCSI instance present on the local system." ::= { cpqiScsiConnectionAttributesEntry 4 } cpqiScsiCxnAttrCid OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The iSCSI Connection ID for this connection." ::= { cpqiScsiConnectionAttributesEntry 5 } cpqiScsiCxnAttrState OBJECT-TYPE SYNTAX INTEGER { login(1), full(2), logout(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of this connection, from an iSCSI negotiation point of view. Here are the states: login - The transport protocol connection has been established, but a valid iSCSI login response with the final bit set has not been sent or received. full - A valid iSCSI login response with the final bit set has been sent or received. logout - A valid iSCSI logout command has been sent or received, but the transport protocol connection has not yet been closed." ::= { cpqiScsiConnectionAttributesEntry 6 } cpqiScsiCxnAttrLocalAddrType OBJECT-TYPE SYNTAX INTEGER { -- unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in cpqiScsiCxnLocalAddr." DEFVAL { ipv4 } ::= { cpqiScsiConnectionAttributesEntry 7 } cpqiScsiCxnAttrLocalAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The local Internet Network Address used by this connection." ::= { cpqiScsiConnectionAttributesEntry 8 } cpqiScsiCxnAttrProtocol OBJECT-TYPE SYNTAX INTEGER { icmp(1), igmp(2), ggp(3), ip(4), st(5), tcp(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The transport protocol over which this connection is running. The following values are defined: icmp(1) Internet Control Message igmp(2) Internet Group Management ggp(3) Gateway-to-Gateway ip(4) IP in IP (encapsulation) st(5) Stream tcp(6) Transmission Control" DEFVAL { tcp } ::= { cpqiScsiConnectionAttributesEntry 9 } cpqiScsiCxnAttrLocalPort OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The local transport protocol port used by this connection." ::= { cpqiScsiConnectionAttributesEntry 10 } cpqiScsiCxnAttrRemoteAddrType OBJECT-TYPE SYNTAX INTEGER { ---- unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of Internet Network Address in cpqiScsiCxnRemoteAddr." DEFVAL { ipv4 } ::= { cpqiScsiConnectionAttributesEntry 11 } cpqiScsiCxnAttrRemoteAddr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The remote Internet Network Address used by this connection." ::= { cpqiScsiConnectionAttributesEntry 12 } cpqiScsiCxnAttrRemotePort OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The remote transport protocol port used by this connection." ::= { cpqiScsiConnectionAttributesEntry 13 } cpqiScsiCxnAttrMaxRecvDataSegLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The maximum data payload size supported for command or data PDUs able to be received on this connection." DEFVAL { 8192 } ::= { cpqiScsiConnectionAttributesEntry 14 } cpqiScsiCxnAttrMaxXmitDataSegLength OBJECT-TYPE SYNTAX INTEGER(512..16777215) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "The maximum data payload size supported for command or data PDUs to be sent on this connection." DEFVAL { 8192 } ::= { cpqiScsiConnectionAttributesEntry 15 } cpqiScsiCxnAttrHeaderIntegrity OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the iSCSI header digest scheme in use within this connection." ::= { cpqiScsiConnectionAttributesEntry 16 } cpqiScsiCxnAttrDataIntegrity OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), noDigest(3), crc32c(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the iSCSI data digest scheme in use within this connection." ::= { cpqiScsiConnectionAttributesEntry 17 } cpqiScsiCxnAttrRecvMarker OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether or not this connection is receiving markers in in its incoming data stream." DEFVAL { false } ::= { cpqiScsiConnectionAttributesEntry 18 } cpqiScsiCxnAttrSendMarker OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates whether or not this connection is inserting markers in in its outgoing data stream." DEFVAL { false } ::= { cpqiScsiConnectionAttributesEntry 19 } cpqiScsiCxnAttrVersionActive OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Active version number of the iSCSI specification negotiated on this connection." ::= { cpqiScsiConnectionAttributesEntry 20 } -- **************************************************************************** -- iSCSI Trap Definitions -- ====================== -- -- The SNMP trap messages must not be bigger than 484 octets (bytes). -- -- Trap support in an Agentless Management Service (AMS) implementation is -- optional. AMS implementation may support all, some, or none of the traps. -- If traps are supported, The user should be provided with the option of -- disabling traps. -- -- ************************************************************************** cpqiScsiLinkUp TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqiScsiInstDescr } DESCRIPTION "iSCSI Link Up. This trap will be sent any time an iSCSI session is up. This can be caused when a iSCSI initiator/target session is configured or when an existing iSCSI initiator/target session that was disconnected is restored. User Action: None required." --#TYPE "iSCSI Link Up Trap (169001)" --#SUMMARY "iSCSI Link up." --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY STORAGE ::= 169001 cpqiScsiLinkDown TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqiScsiInstDescr } DESCRIPTION "iSCSI Link Down. This trap will be sent any time an iSCSI session is down. This can be caused by loss of session due to a disabled iSCSI initiator/target session or because the the iSCSI initiator driver was uninstalled. User Action: Check the iSCSI initiator driver status or iSCSI initiator/target configuration. If no problems are found, the iSCSI initiator driver may need need to be installed or a iSCSI session may need to be configured on initiator and target system." --#TYPE "iSCSI Link Down Trap (169002)" --#SUMMARY "iSCSI link is down." --#SEVERITY MAJOR --#TIMEINDEX 99 --#VARBINDSEVERITY 2 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY STORAGE --#ACTION "Check the iSCSI initiator driver status or iSCSI initiator/target configuration. If no problems are found, the iSCSI initiator driver may need need to be installed or a iSCSI session may need to be configured on initiator and target system." ::= 169002 END