HM2-PLATFORM-DOT1X-ADVANCED-MIB DEFINITIONS ::= BEGIN -- -- *********************************************************** -- Hirschmann Platform DOT1X MIB -- *********************************************************** -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks FROM SNMPv2-SMI dot1xPaePortNumber FROM IEEE8021-PAE-MIB TEXTUAL-CONVENTION, MacAddress, DisplayString FROM SNMPv2-TC hm2PlatformMibs, HmTimeSeconds1970, HmEnabledStatus FROM HM2-TC-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB; hm2PlatformDot1xAdvanced MODULE-IDENTITY LAST-UPDATED "201110180000Z" -- October 18, 2011 ORGANIZATION "Hirschmann Automation and Control GmbH" CONTACT-INFO "Postal: Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Phone: +49 7127 140 E-mail: hac.support@belden.com" DESCRIPTION "The Hirschmann Private Platform2 MIB for advanced 802.1x support. Copyright (C) 2011. All Rights Reserved." REVISION "201110180000Z" DESCRIPTION "Initial version." ::= { hm2PlatformMibs 36 } Dot1xPortControlMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The control values of the Authenticator PAE controlled Port." SYNTAX INTEGER { forceUnauthorized(1), auto(2), forceAuthorized(3), multiClient(4) } Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The action to be taken on session termination ." SYNTAX INTEGER { default(1), reauthenticate(2) } hm2AgentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformDot1xAdvanced 1 } hm2AgentDot1xRadiusVlanAssignment OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot1x Vlan Assignment Support on the switch." DEFVAL { disable } ::= { hm2AgentDot1xEnhancementConfigGroup 1 } hm2AgentDot1xDynamicVlanCreationMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot1x dynamic vlan creation Support on the switch." DEFVAL { disable } ::= { hm2AgentDot1xEnhancementConfigGroup 2 } --*********************************************** -- clear dot1x statistics [ / | all ] --*********************************************** hm2AgentDot1xStatisticsClear OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x statistics will be reset." DEFVAL { disable } ::= { hm2AgentDot1xEnhancementConfigGroup 248 } hm2AgentDot1xPortStatsClearTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDot1xPortStatsClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to clear the dot1x statistics per interface." ::= { hm2AgentDot1xEnhancementConfigGroup 249 } hm2AgentDot1xMABFormatGroupSize OBJECT-TYPE SYNTAX INTEGER { group-size-1(1), group-size-2(2), group-size-4(4), group-size-12(12) } MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies the number of characters the MAC address will be splitted into and separated by the character specified by hm2AgentDot1xMABFormatGroupSeparator. For the value of 2, the separator - and the MAC address 001122334455 the username MAB will use to authenticate the client will be 00-11-22-33-44-55 ." DEFVAL { group-size-12 } ::= { hm2AgentDot1xEnhancementConfigGroup 250} hm2AgentDot1xMABFormatGroupSeparator OBJECT-TYPE SYNTAX INTEGER { hyphen(1), colon(2), dot(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies which one of {- | : | .} characters separates the groups of characters of size defined by hm2AgentDot1xMABFormatGroupSize. " DEFVAL { hyphen } ::= { hm2AgentDot1xEnhancementConfigGroup 251} hm2AgentDot1xMABFormatLetterCase OBJECT-TYPE SYNTAX INTEGER { lower-case(1), upper-case(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies how MAB formats the letters of the username and password. " DEFVAL { upper-case } ::= { hm2AgentDot1xEnhancementConfigGroup 252} hm2AgentDot1xMABPassword OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies a global password for all MAB clients. If the password is an empty string then client's username is used as password. The password is displayed as an empty string or asterisks." DEFVAL { "" } ::= { hm2AgentDot1xEnhancementConfigGroup 253} hm2AgentDot1xPortStatsClearEntry OBJECT-TYPE SYNTAX Hm2AgentDot1xPortStatsClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry to clear the Dot1x statistics per interface." INDEX { hm2AgentDot1xStatsIfIndex } ::= { hm2AgentDot1xPortStatsClearTable 1 } Hm2AgentDot1xPortStatsClearEntry ::= SEQUENCE { hm2AgentDot1xStatsIfIndex Unsigned32, hm2AgentDot1xPortStatsClear INTEGER } hm2AgentDot1xStatsIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the physical port on which dot1x statistics are counted." ::= { hm2AgentDot1xPortStatsClearEntry 1 } hm2AgentDot1xPortStatsClear OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x statistics for the given port will be reset. The value is write-only. Attempt to read will return disable(2)." DEFVAL { disable } ::= { hm2AgentDot1xPortStatsClearEntry 2 } --************************************************************************************** -- hm2AgentDot1xPortConfigGroup -> Contains MIB objects configuring/displaying Dot1x port details -- and associated functionality -- --************************************************************************************** hm2AgentDot1xPortConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformDot1xAdvanced 2 } -------------------------------------------------------------- -- The Dot1x Enhanced Port Table -------------------------------------------------------------- hm2AgentDot1xPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDot1xPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for dot1x enhanced Port details and associated functionality." ::= { hm2AgentDot1xPortConfigGroup 1 } hm2AgentDot1xPortConfigEntry OBJECT-TYPE SYNTAX Hm2AgentDot1xPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for port config table." INDEX { dot1xPaePortNumber} ::= {hm2AgentDot1xPortConfigTable 1 } Hm2AgentDot1xPortConfigEntry ::= SEQUENCE { hm2AgentDot1xPortControlMode Dot1xPortControlMode, hm2AgentDot1xGuestVlanId Unsigned32, hm2AgentDot1xGuestVlanPeriod Unsigned32, hm2AgentDot1xUnauthenticatedVlan Unsigned32, hm2AgentDot1xMaxUsers Unsigned32, hm2AgentDot1xPortVlanAssigned Unsigned32, hm2AgentDot1xPortVlanAssignedReason INTEGER, hm2AgentDot1xPortSessionTimeout Unsigned32, hm2AgentDot1xPortTerminationAction Dot1xSessionTerminationAction, hm2AgentDot1xPortMABenabled HmEnabledStatus, hm2AgentDot1xPortMABenabledOperational HmEnabledStatus } hm2AgentDot1xPortControlMode OBJECT-TYPE SYNTAX Dot1xPortControlMode MAX-ACCESS read-write STATUS current DESCRIPTION "Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the port is in unauthorized mode, auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . Otherwise, the port is in unauthorized mode. If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. force-authorized - The port is placed in authorized mode multiClient - If more than one client is attached to the port, then each client needs to authenticate separately. This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB" DEFVAL {forceAuthorized} ::= { hm2AgentDot1xPortConfigEntry 1} hm2AgentDot1xGuestVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Guest Vlan of the port. A port will be moved to its Guest Vlan if no client sucessfully authenticates on that port for the Guest Vlan Period. A value of zero indicates no Guest Vlan is configured for the interface." DEFVAL {0} ::= { hm2AgentDot1xPortConfigEntry 2} hm2AgentDot1xGuestVlanPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the port. This is always three times the value of dot1xAuthTxPeriod." DEFVAL { 90 } ::= { hm2AgentDot1xPortConfigEntry 3 } hm2AgentDot1xUnauthenticatedVlan OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Unauthenticated Vlan of the port. A port will be moved to its unauthenticated Vlan if the client authenticates unsucessfully on that port . A value of zero indicates no Unauthenticated Vlan is configured for the port. " DEFVAL {0} ::= { hm2AgentDot1xPortConfigEntry 4} hm2AgentDot1xMaxUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies the maximum users or clients that can authenticate on this port when the port control mode is multiClient. " DEFVAL { 16 } ::= { hm2AgentDot1xPortConfigEntry 5} hm2AgentDot1xPortVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the vlan the port is assigned to by Dot1x . Only relevant if the port control mode of the port is auto. " DEFVAL {0} ::= { hm2AgentDot1xPortConfigEntry 6} hm2AgentDot1xPortVlanAssignedReason OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Reason the port is assigned to the vlan specified by hm2AgentDot1xPortVlanAssigned . Only relevant if the port control mode of the port is auto. " DEFVAL { notAssigned } ::= { hm2AgentDot1xPortConfigEntry 7} hm2AgentDot1xPortSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the session timeout value assigned by the Radius server for this port . Only relevant if the port control mode of the port is auto. " ::= { hm2AgentDot1xPortConfigEntry 8} hm2AgentDot1xPortTerminationAction OBJECT-TYPE SYNTAX Dot1xSessionTerminationAction MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . Only relevant if the port control mode of the port is auto. " DEFVAL {1} ::= { hm2AgentDot1xPortConfigEntry 9} hm2AgentDot1xPortMABenabled OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Specifies if Mac-based bypass authentication is configured for the port. " DEFVAL { disable } ::= { hm2AgentDot1xPortConfigEntry 10} hm2AgentDot1xPortMABenabledOperational OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION " Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. " DEFVAL { disable } ::= { hm2AgentDot1xPortConfigEntry 11} --************************************************************************************** -- hm2AgentDot1xClientConfigGroup -> Contains MIB objects displaying Dot1x Client details and -- associated Functionality -- --************************************************************************************** hm2AgentDot1xClientConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformDot1xAdvanced 3 } hm2AgentDot1xClientConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDot1xClientConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for dot1x Client details and associated functionality." ::= { hm2AgentDot1xClientConfigGroup 1 } hm2AgentDot1xClientConfigEntry OBJECT-TYPE SYNTAX Hm2AgentDot1xClientConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for port config table." INDEX { hm2AgentDot1xClientMacAddress} ::= {hm2AgentDot1xClientConfigTable 1 } Hm2AgentDot1xClientConfigEntry ::= SEQUENCE { hm2AgentDot1xClientMacAddress MacAddress, hm2AgentDot1xLogicalPort Unsigned32, hm2AgentDot1xInterface Unsigned32, hm2AgentDot1xClientAuthPAEstate INTEGER, hm2AgentDot1xClientBackendState INTEGER, hm2AgentDot1xClientUserName DisplayString, hm2AgentDot1xClientSessionTime Unsigned32, hm2AgentDot1xClientFilterID DisplayString, hm2AgentDot1xClientVlanAssigned Unsigned32, hm2AgentDot1xClientVlanAssignedReason INTEGER, hm2AgentDot1xClientSessionTimeout Unsigned32, hm2AgentDot1xClientTerminationAction Dot1xSessionTerminationAction } hm2AgentDot1xClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client MAC address of the client. " ::= { hm2AgentDot1xClientConfigEntry 1} hm2AgentDot1xLogicalPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client MAC address of the client . " ::= { hm2AgentDot1xClientConfigEntry 2} hm2AgentDot1xInterface OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the physical interface to which the client is attached . " ::= { hm2AgentDot1xClientConfigEntry 3} hm2AgentDot1xClientAuthPAEstate OBJECT-TYPE SYNTAX INTEGER { initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the Authenticator PAE state machine for the client." ::={ hm2AgentDot1xClientConfigEntry 4} hm2AgentDot1xClientBackendState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Backend Authentication state machine." ::={ hm2AgentDot1xClientConfigEntry 5} hm2AgentDot1xClientUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the username with which the client is authenticated to the Radius server . This value is only valid when the client is in authenticated state. " ::= { hm2AgentDot1xClientConfigEntry 6} hm2AgentDot1xClientSessionTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the time elapsed in seconds since the client was authenticated in this session. This value is only valid when the client is in authenticated state. " ::= { hm2AgentDot1xClientConfigEntry 7} hm2AgentDot1xClientFilterID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Filter ID or Diffserv Policy name to be applied to the session . This vlaue is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state." ::= { hm2AgentDot1xClientConfigEntry 8} hm2AgentDot1xClientVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the vlan the client is associated with by Dot1x . This value is only valid when the client is in authenticated state." ::= { hm2AgentDot1xClientConfigEntry 9} hm2AgentDot1xClientVlanAssignedReason OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), invalid(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Reason the client is associated to the vlan specified by hm2AgentDot1xClientVlanAssigned . This value is only valid when the client is in authenticated state." ::= { hm2AgentDot1xClientConfigEntry 10} hm2AgentDot1xClientSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the session time remaining for the client if assigned by the Radius server . A value of 0 indicates that no session timeout was assigned by the RADIUS server. This value is only valid when the client is in authenticated state. " ::= { hm2AgentDot1xClientConfigEntry 11} hm2AgentDot1xClientTerminationAction OBJECT-TYPE SYNTAX Dot1xSessionTerminationAction MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the session termination action assigned by the Radius Server . This is the action taken when the session times out . This value is only valid when the client is in authenticated state. " ::= { hm2AgentDot1xClientConfigEntry 12} --************************************************************************************** -- hm2AgentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x -- Monitor Mode details and associated Functionality -- --************************************************************************************** hm2AgentDot1xMonitorModeConfigGroup OBJECT IDENTIFIER ::= { hm2PlatformDot1xAdvanced 4 } hm2AgentDot1xMonitorModeEnabled OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Dot1x Monitor mode Support on the switch." DEFVAL { disable } ::= { hm2AgentDot1xMonitorModeConfigGroup 1 } hm2AgentDot1xMonitorModeClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves the number of clients that got authenticated by Monitor mode globally." ::= { hm2AgentDot1xMonitorModeConfigGroup 2 } hm2AgentDot1xNonMonitorModeClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled." ::= { hm2AgentDot1xMonitorModeConfigGroup 3 } --************************************************************************************** -- hm2AgentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x -- Monitor Mode details and associated Functionality -- --************************************************************************************** hm2AgentDot1xAuthHistoryResultsGroup OBJECT IDENTIFIER ::= { hm2PlatformDot1xAdvanced 5 } hm2AgentDot1xPortAuthHistoryResultTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDot1xPortAuthHistoryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to display the dot1x monitor mode results." ::= { hm2AgentDot1xAuthHistoryResultsGroup 1 } hm2AgentDot1xPortAuthHistoryResultEntry OBJECT-TYPE SYNTAX Hm2AgentDot1xPortAuthHistoryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents Dot1x Authentication results for a Dot1x Authentication History table." INDEX { hm2AgentDot1xAuthHistoryResultIfaceIndex, hm2AgentDot1xAuthHistoryResultIndex} ::= {hm2AgentDot1xPortAuthHistoryResultTable 1 } Hm2AgentDot1xPortAuthHistoryResultEntry ::= SEQUENCE { hm2AgentDot1xAuthHistoryResultIfaceIndex Unsigned32, hm2AgentDot1xAuthHistoryResultIndex Unsigned32, hm2AgentDot1xAuthHistoryResultTimeStamp HmTimeSeconds1970, hm2AgentDot1xAuthHistoryResultAge TimeTicks, hm2AgentDot1xAuthHistoryResultMacAddress MacAddress, hm2AgentDot1xAuthHistoryResultVlanId Unsigned32, hm2AgentDot1xAuthHistoryResultAuthStatus INTEGER, hm2AgentDot1xAuthHistoryResultAccessStatus INTEGER, hm2AgentDot1xAuthHistoryResultFilterID DisplayString, hm2AgentDot1xAuthHistoryResultVlanAssigned Unsigned32, hm2AgentDot1xAuthHistoryResultVlanAssignedType INTEGER, hm2AgentDot1xAuthHistoryResultReasonCode INTEGER } hm2AgentDot1xAuthHistoryResultIfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the physical Bridge Port on which dot1x Auth event might be received." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 1 } hm2AgentDot1xAuthHistoryResultIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reference to the Dot1x Authentication history table maintained." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 2 } hm2AgentDot1xAuthHistoryResultTimeStamp OBJECT-TYPE SYNTAX HmTimeSeconds1970 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the exact time of Dot1x Authentication event information occurred maintained in the history table." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 3 } hm2AgentDot1xAuthHistoryResultAge OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 4 } hm2AgentDot1xAuthHistoryResultMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the client.s MAC Address maintained in the Dot1x Authentication history table." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 5 } hm2AgentDot1xAuthHistoryResultVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLANID maintained in the history table (It is the VLANID on which the Dot1x table. It is the VLANID which is failed to associate to the port during authentication process. The VLANID is identified distinctly by the Reason code for the respective entry. Valid only when the reason code is set to 13 (VLAN assignment failure). In all the other cases, VLANID is set to 0. " ::= { hm2AgentDot1xPortAuthHistoryResultEntry 6 } hm2AgentDot1xAuthHistoryResultAuthStatus OBJECT-TYPE SYNTAX INTEGER { success(1), failure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place. " ::= { hm2AgentDot1xPortAuthHistoryResultEntry 7 } hm2AgentDot1xAuthHistoryResultAccessStatus OBJECT-TYPE SYNTAX INTEGER { granted(1), denied(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Authentication access status indicates the exact status of the dot1x client. Granted means the client is allowed access to the network using dot1x or monitor mode. Denied means the client is not allowed access to the network." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 8 } hm2AgentDot1xAuthHistoryResultFilterID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. This value is only valid when the client is in authenticated state." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 9 } hm2AgentDot1xAuthHistoryResultVlanAssigned OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLANID maintained in the history table (It is the VLANID Assigned to a Port or Client authenticate)." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 10 } hm2AgentDot1xAuthHistoryResultVlanAssignedType OBJECT-TYPE SYNTAX INTEGER { default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the VLAN Assigned Reason maintained in the history table." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 11 } hm2AgentDot1xAuthHistoryResultReasonCode OBJECT-TYPE SYNTAX INTEGER { supplicant-timeout(1), eapol-timeout(2), radius-request-timeout(3), radius-auth-failure(4), radius-auth-comm-failure(5), radius-challenge-process-invalid-nas-port(6), radius-challenge-process-wrong-eap-msg(7), radius-request-send-msg-error(8), radius-accept-process-invalid-nas-port(9), radius-accept-process-wrong-eap-msg(10), radius-accept-filter-assignment-failure(11), radius-accept-diffserv-not-present(12), radius-accept-vlan-assignment-failure(13), vlan-assignment-feature-not-enabled(14), radius-success(15), local-auth-user-not-found(16), local-auth-user-no-access(17), local-auth-md5-validation-failure(18), local-auth-invalid-eap-type(19), local-failure(20), local-success(21), radius-invalid-radius-status(22), guest-vlan-timer-expiry(23), undefined-auth-method(24), reject-auth-method(25), invalid-auth-method(26), auth-method-not-configured(27), unauth-vlan-not-created(28), guest-vlan-not-created(29), radius-accept-invalid-vlan-failure(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the Dot1x authentication reason refered by the result index on a port." ::= { hm2AgentDot1xPortAuthHistoryResultEntry 12 } hm2AgentDot1xAuthHistoryResultsClear OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x Authentication History information will be reset." DEFVAL { disable } ::= { hm2AgentDot1xAuthHistoryResultsGroup 2 } --************************************************************************************** -- hm2AgentDot1xPortAuthHistoryResultClearTable -- --************************************************************************************** hm2AgentDot1xPortAuthHistoryResultClearTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AgentDot1xPortAuthHistoryResultClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to clear the dot1x monitor mode results per interface." ::= { hm2AgentDot1xAuthHistoryResultsGroup 3 } hm2AgentDot1xPortAuthHistoryResultClearEntry OBJECT-TYPE SYNTAX Hm2AgentDot1xPortAuthHistoryResultClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table." INDEX { hm2AgentDot1xAuthHistoryResultIfIndex } ::= {hm2AgentDot1xPortAuthHistoryResultClearTable 1 } Hm2AgentDot1xPortAuthHistoryResultClearEntry ::= SEQUENCE { hm2AgentDot1xAuthHistoryResultIfIndex Unsigned32, hm2AgentDot1xPortAuthHistoryResultsClear INTEGER } hm2AgentDot1xAuthHistoryResultIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the physical Bridge Port on which dot1x Auth event might be received." ::= { hm2AgentDot1xPortAuthHistoryResultClearEntry 1 } hm2AgentDot1xPortAuthHistoryResultsClear OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "When set to enable(1), all Dot1x Authentication History information for the given port will be reset. The value is write-only. Attempt to read will return disable(2)." DEFVAL { disable } ::= { hm2AgentDot1xPortAuthHistoryResultClearEntry 2 } END