HM2-LLDP-MIB DEFINITIONS ::= BEGIN

-- *************************************************************
-- Hirschmann LLDP MIB
-- *************************************************************

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    Integer32              FROM SNMPv2-SMI
    hm2ConfigurationMibs,
    HmEnabledStatus        FROM HM2-TC-MIB
    ifIndex                FROM IF-MIB;
    

hm2LLDPMib MODULE-IDENTITY
   LAST-UPDATED "201104110000Z" -- April 11, 2011
   ORGANIZATION "Hirschmann Automation and Control GmbH"
   CONTACT-INFO
        "Postal:     Stuttgarter Str. 45-51
                     72654 Neckartenzlingen
                     Germany
         Phone:      +49 7127 140
         E-mail:     hac.support@belden.com"
   DESCRIPTION
      "Hirschmann LLDP MIB.
       Copyright (C) 2011. All Rights Reserved."
   REVISION "201104110000Z" -- April 11, 2011
   DESCRIPTION
      "Initial version."
   ::= { hm2ConfigurationMibs 34 }

-- *************************************************************
-- hm2LLDPMib
-- *************************************************************
hm2LLDPMibObjects  		OBJECT IDENTIFIER ::= { hm2LLDPMib 1 }
-- hm2LLDPMibConformance  	OBJECT IDENTIFIER ::= { hm2LLDPMib 2 }

-- *************************************************************
-- hm2LLDP groups
-- *************************************************************
hm2LLDPConfigGroup OBJECT IDENTIFIER ::= { hm2LLDPMibObjects 1 }
         
-- *************************************************************
-- hm2LLDPConfigGroup
-- *************************************************************
hm2LLDPAdminStatus OBJECT-TYPE
   SYNTAX HmEnabledStatus
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
      "Enable/Disable LLDP operation. A (1) enables, a (2) disables."
   DEFVAL { enable }           
   ::= { hm2LLDPConfigGroup 1 }

hm2LLDPIfTable   OBJECT-TYPE
   SYNTAX   SEQUENCE OF Hm2LLDPIfEntry
   MAX-ACCESS     not-accessible
   STATUS   current
   DESCRIPTION
      "This table contains variables for each interface of the switch."
   ::= { hm2LLDPConfigGroup 2 }


hm2LLDPIfEntry   OBJECT-TYPE
   SYNTAX   Hm2LLDPIfEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION 
      "The entry of the hmLLDPInterfaceTable."
   INDEX { ifIndex }
   ::= { hm2LLDPIfTable 1 }

Hm2LLDPIfEntry ::= SEQUENCE {
   hm2LLDPIfMaxNeighbors Integer32,
   hm2LLDPIfFDBMode INTEGER
   }

hm2LLDPIfMaxNeighbors OBJECT-TYPE
   SYNTAX Integer32 (1..50)
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
      "Configure Hirschmann LLDP on this physical port.
      This value limits the number of entries in the remTable for this port."
   DEFVAL { 10 }                
   ::= { hm2LLDPIfEntry 1 }
   
hm2LLDPIfFDBMode   OBJECT-TYPE
   SYNTAX INTEGER { 
      lldpOnly(1),
      macOnly(2),
      both(3),
      autoDetect(4)
   }
   MAX-ACCESS     read-write
   STATUS   current
   DESCRIPTION
      "If configured to lldpOnly(1), only received LLDP messages
      will be used to populate the LLDP-MIB's remTable.
      If configured to macOnly(2), a learned mac addresses out of the 
      switch's forwarding database (FDB) will be used to populate the 
      LLDP-MIB's remTable. A learned mac address will only be used when exactly 
      one mac address entry is present in the FDB for the interface.
      If configured to both(3), both received LLDP messages
      and a learned mac addresses out of the switch's FDB
      will be used to populate the LLDP-MIB's remTable.
      If configured to autoDetect(4) and LLDP messages are received on this 
      port, this mode will behave like lldpOnly(1), 
      otherwise it will behave like macOnly(2)."
   DEFVAL { autoDetect }
   ::= { hm2LLDPIfEntry 2 }

END