HM2-L2FORWARDING-MIB DEFINITIONS ::= BEGIN

--
-- *************************************************************
-- Hirschmann L2 Forwarding MIB
-- *************************************************************
--

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, Unsigned32,
    Integer32					FROM SNMPv2-SMI
    hm2ConfigurationMibs,
		HmEnabledStatus        FROM HM2-TC-MIB;

hm2L2ForwardingMib MODULE-IDENTITY
	LAST-UPDATED "201103160000Z" -- March 16, 2011
    ORGANIZATION "Hirschmann Automation and Control GmbH"
    CONTACT-INFO
        "Postal:     Stuttgarter Str. 45-51
                     72654 Neckartenzlingen
                     Germany
         Phone:      +49 7127 140
         E-mail:     hac.support@belden.com"
    DESCRIPTION
        "Hirschmann L2 Forwarding MIB.
         Copyright (C) 2011. All Rights Reserved."
    REVISION     "201103160000Z" -- March 16, 2011
    DESCRIPTION
         "Initial version."
    ::= { hm2ConfigurationMibs 30 }

--
-- *************************************************************
-- hm2L2ForwardingMib
-- *************************************************************
--
hm2L2ForwardingMibNotifications		OBJECT IDENTIFIER ::= { hm2L2ForwardingMib 0 }
hm2L2ForwardingMibObjects			OBJECT IDENTIFIER ::= { hm2L2ForwardingMib 1 }
-- hm2L2ForwardingMibConformance		OBJECT IDENTIFIER ::= { hm2L2ForwardingMib 2 }


--
-- *************************************************************
-- hm2L2Forwarding groups
-- *************************************************************
--
hm2L2ForwGeneralGroup			OBJECT IDENTIFIER ::= { hm2L2ForwardingMibObjects 1 }
hm2L2ForwClassOfServiceGroup	OBJECT IDENTIFIER ::= { hm2L2ForwardingMibObjects 2 }

---
--- The General Forwarding Group
---	  

hm2L2VlanUnawareModeAdminStatus	 OBJECT-TYPE
		SYNTAX 		HmEnabledStatus
		MAX-ACCESS	read-write
		STATUS 		current
		DESCRIPTION   	
			"Enables or disables VLAN unaware mode for the switch unit."
		DEFVAL { disable }
		::= { hm2L2ForwGeneralGroup 1 }

hm2L2VlanUnawareModeOperStatus	 OBJECT-TYPE
		SYNTAX 	 	HmEnabledStatus	
		MAX-ACCESS	read-only
		STATUS 		current
		DESCRIPTION   	
			"Shows if VLAN unaware mode for the switch unit is enables or disables."
		::= { hm2L2ForwGeneralGroup 2 }

		
---
--- The Class of Service Group
---	  
		
		
		
-- -------------------------------------------------------------
-- Traffic Class Table (replacement for port based dot1dTrafficClassTable)
-- -------------------------------------------------------------

		hm2TrafficClassTable OBJECT-TYPE
		    SYNTAX      SEQUENCE OF Hm2TrafficClassEntry
		    MAX-ACCESS  not-accessible
		    STATUS      current
		    DESCRIPTION
		        "A table mapping evaluated User Priority to Traffic
		        Class, for forwarding by the bridge.  Traffic class is a
		        number in the range (0..(dot1dPortNumTrafficClasses-1))."
		    REFERENCE
		        "ISO/IEC 15802-3 Table 7-2"
		    ::= { hm2L2ForwClassOfServiceGroup 1 }

		hm2TrafficClassEntry OBJECT-TYPE
		    SYNTAX      Hm2TrafficClassEntry
		    MAX-ACCESS  not-accessible
		    STATUS      current
		    DESCRIPTION
		        "User Priority to Traffic Class mapping."
		    INDEX   { hm2TrafficClassPriority }
		    ::= { hm2TrafficClassTable 1 }

		Hm2TrafficClassEntry ::=
		    SEQUENCE {
		        hm2TrafficClassPriority
		            Integer32,
		        hm2TrafficClass
		            Integer32
		    }

		hm2TrafficClassPriority OBJECT-TYPE
		    SYNTAX      Integer32 (0..7)
		    MAX-ACCESS  not-accessible
		    STATUS      current
		    DESCRIPTION
		        "The Priority value determined for the received frame.
		        This value is equivalent to the priority indicated in
		        the tagged frame received, or one of the evaluated
		        priorities, determined according to the media-type.

		        For untagged frames received from Ethernet media, this
		        value is equal to the dot1dPortDefaultUserPriority value
		        for the ingress port."
		    ::= { hm2TrafficClassEntry 1 }

		hm2TrafficClass OBJECT-TYPE
		    SYNTAX      Integer32 (0..7)
		    MAX-ACCESS  read-write
		    STATUS      current
		    DESCRIPTION
		        "The Traffic Class the received frame is mapped to."
		    ::= { hm2TrafficClassEntry 2 }

		
-- -------------------------------------------------------------
-- IP DSCP mapping table (replacement for port based hm2AgentCosMapIpDscpTable)
-- -------------------------------------------------------------
		
   -- IP DSCP mapping table
		
	    hm2CosMapIpDscpTable OBJECT-TYPE
	         SYNTAX      SEQUENCE OF Hm2CosMapIpDscpEntry
	         MAX-ACCESS  not-accessible
	         STATUS      current
	         DESCRIPTION
	                     "A table mapping evaluated IP DSCP to Traffic Class 
	                     for a specific physical port.  Traffic class is a 
	                     number in the range 
	                     (0..(dot1dPortNumTrafficClasses-1))."
	         
	         ::= { hm2L2ForwClassOfServiceGroup 2 }             
	         
	    hm2CosMapIpDscpEntry OBJECT-TYPE
	         SYNTAX      Hm2CosMapIpDscpEntry
	         MAX-ACCESS  not-accessible
	         STATUS      current
	         DESCRIPTION
	                     "IP DSCP to Traffic Class mapping for a port."
	         INDEX   { hm2CosMapIpDscpValue }
	         ::= { hm2CosMapIpDscpTable 1 }

	    Hm2CosMapIpDscpEntry ::=
	         SEQUENCE {
	            hm2CosMapIpDscpValue			Unsigned32,	
	            hm2CosMapIpDscpTrafficClass		Unsigned32
	         }

	         hm2CosMapIpDscpValue OBJECT-TYPE
	              SYNTAX      Unsigned32 (0..63)
	              MAX-ACCESS  not-accessible
	              STATUS      current
	              DESCRIPTION
	                          "The IP DSCP value contained in the received frame.  
	                          This value is only indicated in IP packets, but is 
	                          independent of both media-type and frame tagging.
	                          
	                          Non-IP packets are handled in accordance with the 
	                          dot1dPortDefaultUserPriority value of the ingress 
	                          port."

	              ::= { hm2CosMapIpDscpEntry 1 }

	         hm2CosMapIpDscpTrafficClass OBJECT-TYPE
	              SYNTAX      Unsigned32 (0..7)
	              MAX-ACCESS  read-write
	              STATUS      current
	              DESCRIPTION
	                          "Traffic class priority queue the received frame is 
	                          mapped to."
	                         
	              ::= { hm2CosMapIpDscpEntry 2 }

		
END