HM2-DHCPS-MIB DEFINITIONS ::= BEGIN -- -- *********************************************************** -- Hirschmann DHCP Server MIB -- *********************************************************** -- IMPORTS OBJECT-IDENTITY, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32, IpAddress FROM SNMPv2-SMI -- RFC 2578 RowStatus, DisplayString, MacAddress FROM SNMPv2-TC hm2ConfigurationMibs, HmEnabledStatus FROM HM2-TC-MIB InterfaceIndex FROM IF-MIB; hm2DhcpsMib MODULE-IDENTITY LAST-UPDATED "201203160000Z" -- March 16, 2012 ORGANIZATION "Hirschmann Automation and Control GmbH" CONTACT-INFO "Postal: Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Phone: +49 7127 140 E-mail: hac.support@belden.com" DESCRIPTION "Hirschmann DHCP server MIB. Copyright (C) 2012. All Rights Reserved." REVISION "201203160000Z" -- March 16, 2012 DESCRIPTION "Initial version." ::= { hm2ConfigurationMibs 91 } -- -- DHCP Server MIB -- hm2DHCPServerMibNotifications OBJECT IDENTIFIER ::= { hm2DhcpsMib 0 } hm2DHCPServerMibObjects OBJECT IDENTIFIER ::= { hm2DhcpsMib 1 } -- hm2DHCPServerMibConformance OBJECT IDENTIFIER ::= { hm2DhcpsMib 2 } hm2DHCPServerSNMPExtensionGroup OBJECT IDENTIFIER ::= { hm2DhcpsMib 3 } -- -- DHCP Server Group -- hm2DHCPServerGroup OBJECT IDENTIFIER ::= { hm2DHCPServerMibObjects 1 } hm2DHCPServerConfigGroup OBJECT IDENTIFIER ::= { hm2DHCPServerGroup 1 } hm2DHCPServerLeaseGroup OBJECT IDENTIFIER ::= { hm2DHCPServerGroup 2 } hm2DHCPServerInterfaceGroup OBJECT IDENTIFIER ::= { hm2DHCPServerGroup 3 } hm2DHCPServerCounterGroup OBJECT IDENTIFIER ::= { hm2DHCPServerGroup 4 } -- -- DHCP Server Config Group -- hm2DHCPServerMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable DHCP server global." DEFVAL { disable } ::= { hm2DHCPServerConfigGroup 1 } hm2DHCPServerMaxPoolEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum possible entries in hm2DHCPServerPoolTable." ::= { hm2DHCPServerConfigGroup 2 } hm2DHCPServerMaxLeaseEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum possible entries in hm2DHCPServerLeaseTable." ::= { hm2DHCPServerConfigGroup 3 } hm2DHCPServerAddrProbe OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "If set to enable the DHCP server probes the allocated address with an ICMP Echo Request before offering to the client." DEFVAL { enable } ::= { hm2DHCPServerConfigGroup 4 } -- DHCP Pool hm2DHCPServerPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DHCPServerPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the DHCP server pools." ::= { hm2DHCPServerConfigGroup 5 } hm2DHCPServerPoolEntry OBJECT-TYPE SYNTAX Hm2DHCPServerPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the hm2DHCPServerPoolTable." INDEX { hm2DHCPServerPoolIndex } ::= { hm2DHCPServerPoolTable 1} Hm2DHCPServerPoolEntry ::= SEQUENCE { hm2DHCPServerPoolIndex Unsigned32, hm2DHCPServerPoolStartIpAddress IpAddress, hm2DHCPServerPoolEndIpAddress IpAddress, hm2DHCPServerPoolLeaseTime Unsigned32, hm2DHCPServerPoolFlags BITS, hm2DHCPServerPoolIfIndex Integer32, hm2DHCPServerPoolMacAddress MacAddress, hm2DHCPServerPoolGateway IpAddress, hm2DHCPServerPoolClientId OCTET STRING, hm2DHCPServerPoolRemoteId OCTET STRING, hm2DHCPServerPoolCircuitId OCTET STRING, hm2DHCPServerPoolHirschmannClient HmEnabledStatus, hm2DHCPServerPoolVlanId Integer32, hm2DHCPServerPoolOptionConfFileName DisplayString, hm2DHCPServerPoolOptionGateway IpAddress, hm2DHCPServerPoolOptionNetmask IpAddress, hm2DHCPServerPoolOptionWINS IpAddress, hm2DHCPServerPoolOptionDNS IpAddress, hm2DHCPServerPoolOptionHostname DisplayString, hm2DHCPServerPoolMethod INTEGER, hm2DHCPServerPoolErrorStatus Unsigned32, hm2DHCPServerPoolRowStatus RowStatus } hm2DHCPServerPoolIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of hm2DHCPServerPoolTable." ::= { hm2DHCPServerPoolEntry 1 } hm2DHCPServerPoolStartIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the first address in the range. The value of hm2DHCPServerPoolStartIpAddress MUST be less than or equal to the value of hm2DHCPServerPoolEndIpAddress." ::= { hm2DHCPServerPoolEntry 2 } hm2DHCPServerPoolEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the last address in the range. The value of hm2DHCPServerPoolEndIpAddress MUST be greater than or equal to the value of hm2DHCPServerPoolStartIpAddress." ::= { hm2DHCPServerPoolEntry 3 } hm2DHCPServerPoolLeaseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The pools lease time in number of seconds. A value of 4294967295 SHOULD be used for leases that have a lease time which is 'infinite' and for BOOTP leases." DEFVAL { 86400 } ::= { hm2DHCPServerPoolEntry 4 } hm2DHCPServerPoolFlags OBJECT-TYPE SYNTAX BITS { interface(0), mac(1), gateway(2), clientid(3), remoteid(4), circuitid(5), dynamic(6), vlanid(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object shows the parameters that are used to lease the IP Address." ::= { hm2DHCPServerPoolEntry 5 } hm2DHCPServerPoolIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the interface." ::= { hm2DHCPServerPoolEntry 6 } hm2DHCPServerPoolMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC Address of the entry that is used to lease the IP Address." ::= { hm2DHCPServerPoolEntry 7 } hm2DHCPServerPoolGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the Gatewayinterface that is used to lease the IP Address." ::= { hm2DHCPServerPoolEntry 8 } hm2DHCPServerPoolClientId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The Client Identifier of the entry that is used to lease the IP Address." ::= { hm2DHCPServerPoolEntry 9 } hm2DHCPServerPoolRemoteId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The Remote Identifier of the entry that is used to lease the IP Address. The Remote Identifier must be send in Option 82 as defined in RFC 3046." ::= { hm2DHCPServerPoolEntry 10 } hm2DHCPServerPoolCircuitId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The Cicuit Identifier of the entry that is used to lease the IP Address. The Circuit Identifier must be send in Option 82 as defined in RFC 3046." ::= { hm2DHCPServerPoolEntry 11 } hm2DHCPServerPoolHirschmannClient OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable Hirschmann Multicast." DEFVAL { disable } ::= { hm2DHCPServerPoolEntry 12 } hm2DHCPServerPoolVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Vlan ID of the entry that is used to lease the IP Address. A value of -1 corresponds to management vlan (the default), any other value (1-4042) represents a specific VLAN" ::= { hm2DHCPServerPoolEntry 13 } -- Pool Options hm2DHCPServerPoolOptionConfFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..70)) MAX-ACCESS read-create STATUS current DESCRIPTION "Full specified name of the configuration file e.g. tftp://192.9.200.1/cfg/config1.sav. An empty string zeros the SNAME and the FILE field in the DHCP header." ::= { hm2DHCPServerPoolEntry 30 } hm2DHCPServerPoolOptionGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the Gateway. A value of 0 disables the attachment of the option field in the DHCP message." ::= { hm2DHCPServerPoolEntry 31 } hm2DHCPServerPoolOptionNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask. A value of 0 disables the attachment of the option field in the DHCP message." ::= { hm2DHCPServerPoolEntry 32 } hm2DHCPServerPoolOptionWINS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the WINS Server. A value of 0 disables the attachment of the option field in the DHCP message." ::= { hm2DHCPServerPoolEntry 33 } hm2DHCPServerPoolOptionDNS OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the DNS Server. A value of 0 disables the attachment of the option field in the DHCP message." ::= { hm2DHCPServerPoolEntry 34 } hm2DHCPServerPoolOptionHostname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the client (Option 12). An empty string disables the attachment of the option field in the DHCP message." ::= { hm2DHCPServerPoolEntry 35 } hm2DHCPServerPoolMethod OBJECT-TYPE SYNTAX INTEGER { none (1), config (2), ttdp (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The source of the DHCP Server Pool. User can set the object to none(1), config(2), ttdp(3)." DEFVAL { none } ::= { hm2DHCPServerPoolEntry 36 } hm2DHCPServerPoolErrorStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The error Code by create a new Pool." ::= { hm2DHCPServerPoolEntry 99 } hm2DHCPServerPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { hm2DHCPServerPoolEntry 100 } -- -- DHCP Server Lease Group -- hm2DHCPServerLeaseTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DHCPServerLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the DHCP server leases." ::= { hm2DHCPServerLeaseGroup 1 } hm2DHCPServerLeaseEntry OBJECT-TYPE SYNTAX Hm2DHCPServerLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the hm2DHCPServerLeaseTable." INDEX { hm2DHCPServerLeasePoolIndex, hm2DHCPServerLeaseIpAddress } ::= { hm2DHCPServerLeaseTable 1} Hm2DHCPServerLeaseEntry ::= SEQUENCE { hm2DHCPServerLeasePoolIndex Unsigned32, hm2DHCPServerLeaseIpAddress IpAddress, hm2DHCPServerLeaseState INTEGER, hm2DHCPServerLeaseTimeRemaining Unsigned32, hm2DHCPServerLeaseIfIndex Integer32, hm2DHCPServerLeaseClientMacAddress MacAddress, hm2DHCPServerLeaseGateway IpAddress, hm2DHCPServerLeaseClientId OCTET STRING, hm2DHCPServerLeaseRemoteId OCTET STRING, hm2DHCPServerLeaseCircuitId OCTET STRING, hm2DHCPServerLeaseStartTime Unsigned32, hm2DHCPServerLeaseAction INTEGER, hm2DHCPServerLeaseVlanId Integer32 } hm2DHCPServerLeasePoolIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the hm2DHCPServerPoolTable above." ::= { hm2DHCPServerLeaseEntry 1 } hm2DHCPServerLeaseIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is an IP address from the pool with index hm2DHCPServerLeasePoolIndex." ::= { hm2DHCPServerLeaseEntry 2 } hm2DHCPServerLeaseState OBJECT-TYPE SYNTAX INTEGER { bootp(1), offering(2), requesting(3), bound(4), renewing(5), rebinding(6), declined(7), released(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the lease." ::= { hm2DHCPServerLeaseEntry 3 } hm2DHCPServerLeaseTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining time of the lease configured in hm2DHCPServerPoolLeaseTime." ::= { hm2DHCPServerLeaseEntry 4 } hm2DHCPServerLeaseIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index where the lease is currently active." ::= { hm2DHCPServerLeaseEntry 5 } hm2DHCPServerLeaseClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address of the entry that has leased the IP Address." ::= { hm2DHCPServerLeaseEntry 6 } hm2DHCPServerLeaseGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 address of the Gatewayinterface that was used to lease the IP Address." ::= { hm2DHCPServerLeaseEntry 7 } hm2DHCPServerLeaseClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Client Identifier of the entry that was used to lease the IP Address." ::= { hm2DHCPServerLeaseEntry 8 } hm2DHCPServerLeaseRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Remote Identifier of the entry that was used to lease the IP Address." ::= { hm2DHCPServerLeaseEntry 9 } hm2DHCPServerLeaseCircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Cicuit Identifier of the entry that was used to lease the IP Address." ::= { hm2DHCPServerLeaseEntry 10 } hm2DHCPServerLeaseStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lease start Time." ::= { hm2DHCPServerLeaseEntry 11 } hm2DHCPServerLeaseAction OBJECT-TYPE SYNTAX INTEGER { other(1), release(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Manually release this ip address for new assignment." ::= { hm2DHCPServerLeaseEntry 12 } hm2DHCPServerLeaseVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Vlan ID of the entry that is used to lease the IP Address. A value of -1 corresponds to management vlan (the default), any other value (1-4042) represents a specific VLAN" ::= { hm2DHCPServerLeaseEntry 13 } -- -- DHCP Server Interface Group -- hm2DHCPServerIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DHCPServerIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing current configuration information for each interface." ::= { hm2DHCPServerInterfaceGroup 1 } hm2DHCPServerIfConfigEntry OBJECT-TYPE SYNTAX Hm2DHCPServerIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the hm2DHCPServerIfConfigTable." INDEX { hm2DHCPServerIfConfigIndex } ::= { hm2DHCPServerIfConfigTable 1} Hm2DHCPServerIfConfigEntry ::= SEQUENCE { hm2DHCPServerIfConfigIndex InterfaceIndex, hm2DHCPServerIfConfigMode HmEnabledStatus } hm2DHCPServerIfConfigIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the interface." ::= { hm2DHCPServerIfConfigEntry 1 } hm2DHCPServerIfConfigMode OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable DHCP server on this interface." DEFVAL { enable } ::= { hm2DHCPServerIfConfigEntry 2 } -- -- DHCP Server Counter Group -- hm2DHCPServerCounterIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DHCPServerCounterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing current configuration information for each interface." ::= { hm2DHCPServerCounterGroup 2 } hm2DHCPServerCounterIfEntry OBJECT-TYPE SYNTAX Hm2DHCPServerCounterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row in the hm2DHCPServerCounterIfTable." INDEX { hm2DHCPServerCounterIfIndex } ::= { hm2DHCPServerCounterIfTable 1} Hm2DHCPServerCounterIfEntry ::= SEQUENCE { hm2DHCPServerCounterIfIndex InterfaceIndex, hm2DHCPServerCounterBootpRequests Counter32, hm2DHCPServerCounterBootpInvalids Counter32, hm2DHCPServerCounterBootpReplies Counter32, hm2DHCPServerCounterBootpDroppedUnknownClients Counter32, hm2DHCPServerCounterBootpDroppedNotServingSubnet Counter32, hm2DHCPServerCounterDhcpv4Discovers Counter32, hm2DHCPServerCounterDhcpv4Offers Counter32, hm2DHCPServerCounterDhcpv4Requests Counter32, hm2DHCPServerCounterDhcpv4Declines Counter32, hm2DHCPServerCounterDhcpv4Acks Counter32, hm2DHCPServerCounterDhcpv4Naks Counter32, hm2DHCPServerCounterDhcpv4Releases Counter32, hm2DHCPServerCounterDhcpv4Informs Counter32, hm2DHCPServerCounterDhcpv4ForcedRenews Counter32, hm2DHCPServerCounterDhcpv4Invalids Counter32, hm2DHCPServerCounterDhcpv4DroppedUnknownClient Counter32, hm2DHCPServerCounterDhcpv4DroppedNotServingSubnet Counter32, hm2DHCPServerCounterMiscOtherDhcpServer Counter32 } hm2DHCPServerCounterIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the interface." ::= { hm2DHCPServerCounterIfEntry 1 } -- BOOTP Counter hm2DHCPServerCounterBootpRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received that contain a Message Type of 1 (BOOTREQUEST) in the first octet and do not contain option number 53 (DHCP Message Type) in the options." ::= { hm2DHCPServerCounterIfEntry 2 } hm2DHCPServerCounterBootpInvalids OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received that do not contain a Message Type of 1 (BOOTREQUEST) in the first octet or are not valid BOOTP packets (e.g., too short, invalid field in packet header)." ::= { hm2DHCPServerCounterIfEntry 3 } hm2DHCPServerCounterBootpReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent that contain a Message Type of 2 (BOOTREPLY) in the first octet and do not contain option number 53 (DHCP Message Type) in the options." ::= { hm2DHCPServerCounterIfEntry 4 } hm2DHCPServerCounterBootpDroppedUnknownClients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BOOTP packets dropped due to the server not recognizing or not providing service to the hardware address received in the incoming packet." ::= { hm2DHCPServerCounterIfEntry 5 } hm2DHCPServerCounterBootpDroppedNotServingSubnet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BOOTP packets dropped due to the server not being configured or not otherwise able to serve addresses on the subnet from which this message was received." ::= { hm2DHCPServerCounterIfEntry 6 } -- DHCPv4 Counter hm2DHCPServerCounterDhcpv4Discovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPDISCOVER (option 53 with value 1) packets received." ::= { hm2DHCPServerCounterIfEntry 20 } hm2DHCPServerCounterDhcpv4Offers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPOFFER (option 53 with value 2) packets sent." ::= { hm2DHCPServerCounterIfEntry 21 } hm2DHCPServerCounterDhcpv4Requests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPREQUEST (option 53 with value 3) packets received." ::= { hm2DHCPServerCounterIfEntry 22 } hm2DHCPServerCounterDhcpv4Declines OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPDECLINE (option 53 with value 4) packets received." ::= { hm2DHCPServerCounterIfEntry 23 } hm2DHCPServerCounterDhcpv4Acks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPACK (option 53 with value 5) packets sent." ::= { hm2DHCPServerCounterIfEntry 24 } hm2DHCPServerCounterDhcpv4Naks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPNACK (option 53 with value 6) packets sent." ::= { hm2DHCPServerCounterIfEntry 25 } hm2DHCPServerCounterDhcpv4Releases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPRELEASE (option 53 with value 7) packets received." ::= { hm2DHCPServerCounterIfEntry 26 } hm2DHCPServerCounterDhcpv4Informs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPINFORM (option 53 with value 8) packets received." ::= { hm2DHCPServerCounterIfEntry 27 } hm2DHCPServerCounterDhcpv4ForcedRenews OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPFORCERENEW (option 53 with value 9) packets sent." ::= { hm2DHCPServerCounterIfEntry 28 } hm2DHCPServerCounterDhcpv4Invalids OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets received whose DHCP message type (i.e., option number 53) is not understood or handled by the server." ::= { hm2DHCPServerCounterIfEntry 29 } hm2DHCPServerCounterDhcpv4DroppedUnknownClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets dropped due to the server not recognizing or not providing service to the client-id and/or hardware address received in the incoming packet." ::= { hm2DHCPServerCounterIfEntry 30 } hm2DHCPServerCounterDhcpv4DroppedNotServingSubnet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets dropped due to the server not being configured or not otherwise able to serve addresses on the subnet from which this message was received." ::= { hm2DHCPServerCounterIfEntry 31 } -- Misc Counter hm2DHCPServerCounterMiscOtherDhcpServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BOOTP and DHCP packets from another DHCP server seen on this interface." ::= { hm2DHCPServerCounterIfEntry 40 } -- -- *********************************************************** -- hm2DHCPServerSNMPExtensionGroup -- *********************************************************** -- hm2DHCPServerRowStatusInvalidConfigurationErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "DHCP Server pool with index {0} cannot be enabled, errors in data entry." ::= { hm2DHCPServerSNMPExtensionGroup 1 } hm2DHCPServerConflictDHCPRrelayErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "{0} and {1} cannot be active at the same time." ::= { hm2DHCPServerSNMPExtensionGroup 2 } END