HM2-DEVMGMT-MIB DEFINITIONS ::= BEGIN -- -- *********************************************************** -- Hirschmann Device Management MIB -- *********************************************************** -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex, InterfaceIndexOrZero FROM IF-MIB HmEnabledStatus, HmTimeSeconds1970, hm2ConfigurationMibs FROM HM2-TC-MIB IANAifType FROM IANAifType-MIB; hm2DeviceMgmtMib MODULE-IDENTITY LAST-UPDATED "201210100000Z" -- October 10, 2012 ORGANIZATION "Hirschmann Automation and Control GmbH" CONTACT-INFO "Postal: Stuttgarter Str. 45-51 72654 Neckartenzlingen Germany Phone: +49 7127 140 E-mail: hac.support@belden.com" DESCRIPTION "Hirschmann Device Management MIB. Copyright (C) 2012. All Rights Reserved." REVISION "201210100000Z" -- October 10, 2012 DESCRIPTION "hm2SfpThresholdTable table added to store SFP thresholds." REVISION "201103160000Z" -- March 16, 2011 DESCRIPTION "Initial version." ::= { hm2ConfigurationMibs 10 } Hm2DeviceExtNVMType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of an external non volatile memory device." REFERENCE "RFC3164 - 4.1.1: Table 2" SYNTAX INTEGER { none(0), sd(1), usb(2), serial(3) } -- -- *********************************************************** -- hm2DeviceMgmtMib -- *********************************************************** -- hm2DeviceMgmtMibNotifications OBJECT IDENTIFIER ::= { hm2DeviceMgmtMib 0 } hm2DeviceMgmtMibObjects OBJECT IDENTIFIER ::= { hm2DeviceMgmtMib 1 } -- hm2DeviceMgmtMibConformance OBJECT IDENTIFIER ::= { hm2DeviceMgmtMib 2 } hm2DeviceMgmtGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 1 } hm2DeviceMgmtActionGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 2 } hm2DeviceMgmtSoftwareGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 3 } hm2DeviceMgmtHardwareGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 4 } hm2DeviceMgmtTemperatureGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 5 } hm2IfaceGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 6 } hm2SfpGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 7 } hm2ExtNvmGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 8 } hm2AutoDisableGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 9 } hm2UnitGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 10 } hm2ModuleGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 11 } hm2DeviceMgmtHumidityGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtMibObjects 12 } -- -- *********************************************************** -- hm2DeviceMgmtGroup -- *********************************************************** -- hm2DevMgmtProductId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturer-defined product identifier (product family + product ID). Example:Objekt-ID 1.3.6.1.4.1.248.11.2.1.1 is the hm2ProductFamily EES and Objekt-ID 1.3.6.1.4.1.248.11.2.1.1.2 is the Product ID for ees25-0600" ::= { hm2DeviceMgmtGroup 1 } hm2DevMgmtProductDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturer-defined product description." ::= { hm2DeviceMgmtGroup 2 } hm2DevMgmtSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturer-defined serial number of the device." ::= { hm2DeviceMgmtGroup 3 } -- -- *********************************************************** -- hm2DeviceMgmtActionGroup -- *********************************************************** -- hm2DevMgmtActionReset OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'reset' has the same effect as a power-on sequence (cold start) Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 1 } hm2DevMgmtActionFlushFDB OBJECT-TYPE SYNTAX INTEGER { other(1), flushFDB(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushFDB' will flush the forwarding database of the switch. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 2 } hm2DevMgmtActionFlushARP OBJECT-TYPE SYNTAX INTEGER { other(1), flushARP(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushARP' will flush the ARP cache. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 3 } hm2DevMgmtActionFlushIGS OBJECT-TYPE SYNTAX INTEGER { other(1), flushIGS(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushIGS' will flush all dynamically learnt IGMP snooping entries. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 4 } hm2DevMgmtActionFlushPortStats OBJECT-TYPE SYNTAX INTEGER { other(1), flushPortStats(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushPortStats' will flush all port statistics. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 5 } hm2DevMgmtActionFlushEmailLogStats OBJECT-TYPE SYNTAX INTEGER { other(1), flushEmailLogCounters(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushEmailLogCounters' will flush all email logging statistics. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 6 } hm2DevMgmtActionFlushMMRP OBJECT-TYPE SYNTAX INTEGER { other(1), flushMMRP(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushMMRP' will flush all MMRP counters. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 7 } hm2DevMgmtActionFlushMVRP OBJECT-TYPE SYNTAX INTEGER { other(1), flushMVRP(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushMVRP' will flush all MVRP counters. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 8 } hm2DevMgmtActionFlushMSRP OBJECT-TYPE SYNTAX INTEGER { other(1), flushMSRP(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushMSRP' will flush all MSRP counters. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 9 } hm2DevMgmtActionFlushIeee8021AS OBJECT-TYPE SYNTAX INTEGER { other(1), flushIeee8021AS(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushIeee8021AS' will flush all IEEE8021AS related counters. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 10 } hm2DevMgmtActionFlushDnsClientCache OBJECT-TYPE SYNTAX INTEGER { other(1), flushDnsClientCache(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushDnsClientCache' will flush all DNS client cache records. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 11 } hm2DevMgmtActionFlushDnsCachingServerCache OBJECT-TYPE SYNTAX INTEGER { other(1), flushDnsCachingServerCache(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushDnsCachingServerCache' will flush all DNS caching server cache records. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 12 } hm2DevMgmtActionFlushIpUdpHelperStats OBJECT-TYPE SYNTAX INTEGER { other(1), flushIpUdpHelperStats(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushIpUdpHelperStats' will flush all ip udp helper statistics. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 13 } hm2DevMgmtActionFlushAclStats OBJECT-TYPE SYNTAX INTEGER { other(1), flushAclStats(2), flushAclMacStats(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushAclStats' will flush all acl statistics from the AgentAclRuleTable. Setting the object to 'flushAclMacStats' will flush all acl statistics from the AgentAclMacRuleTable. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 14 } hm2DevMgmtActionFlushLdapUserCache OBJECT-TYPE SYNTAX INTEGER { other(1), flushLdapUserCache(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushLdapUserCache' will flush all cached users from LDAP queries to an Active Directory Server. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 15 } hm2DevMgmtActionFlushMgmtAccessStatistics OBJECT-TYPE SYNTAX INTEGER { other(1), flushMgmtAccessStatistics(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushMgmtAccessStatistics' will flush all management access statistics. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 16 } hm2DevMgmtActionFlushDiffServ OBJECT-TYPE SYNTAX INTEGER { other(1), flushDiffServ(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the object to 'flushDiffServ' will flush all diffserv tables. Reading the object always returns 'other'." ::= { hm2DeviceMgmtActionGroup 17 } hm2DevMgmtActionDelayPreset OBJECT-TYPE SYNTAX Integer32 (0..2147483) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds until a reset that was triggered over the hm2DevMgmtActionReset object is executed. Writing a zero will cancel any scheduled reset." DEFVAL { 0 } ::= { hm2DeviceMgmtActionGroup 100 } hm2DevMgmtActionDelayCurrent OBJECT-TYPE SYNTAX Integer32 (0..2147483) MAX-ACCESS read-only STATUS current DESCRIPTION "If a delayed reset is scheduled this object will decrement from the start value to zero." ::= { hm2DeviceMgmtActionGroup 101 } hm2DevMgmtActionLanBypass OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable run-time LAN Bypass mode upon software request. Run-time LAN bypass feature ensures that traffic pass freely between interface pairs, when system is fully up and is running an Operating System." DEFVAL { disable } ::= { hm2DeviceMgmtActionGroup 102 } hm2DevMgmtActionSystemoffLanBypass OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable system-off LAN Bypass mode upon software request. Systemoff LAN bypass feature ensures that traffic pass freely between interface pairs in the event of device failure caused due to power outage,application failure." DEFVAL { disable } ::= { hm2DeviceMgmtActionGroup 103 } -- -- *********************************************************** -- hm2DeviceMgmtSoftwareVersionGroup -- *********************************************************** -- hm2DeviceMgmtSoftwareVersionGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtSoftwareGroup 1 } hm2DevMgmtSwVersBootcode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of the boot code." ::= { hm2DeviceMgmtSoftwareVersionGroup 1 } hm2DevMgmtSwVersAllowUnsigned OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Status Enable allows the update with an unsigned firmware Status Disable blocks the update with an unsigned firmware." DEFVAL {disable} ::= { hm2DeviceMgmtSoftwareVersionGroup 2 } hm2DevMgmtSwVersCertTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DevMgmtSwVersCertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all information related to the stored certificates." ::= { hm2DeviceMgmtSoftwareVersionGroup 7 } hm2DevMgmtSwVersCertEntry OBJECT-TYPE SYNTAX Hm2DevMgmtSwVersCertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Certificate table entry." INDEX { hm2DevMgmtSwVersCertIndex } ::= { hm2DevMgmtSwVersCertTable 1 } Hm2DevMgmtSwVersCertEntry ::= SEQUENCE { hm2DevMgmtSwVersCertIndex Integer32, hm2DevMgmtSwVersCertSerialNo OCTET STRING, hm2DevMgmtSwVersCertSubject DisplayString, hm2DevMgmtSwVersCertSigAlg DisplayString, hm2DevMgmtSwVersCertType INTEGER, hm2DevMgmtSwVersCertStatus INTEGER, hm2DevMgmtSwVersCertFingerprint OCTET STRING } hm2DevMgmtSwVersCertIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Certificate index." ::= { hm2DevMgmtSwVersCertEntry 1 } hm2DevMgmtSwVersCertSerialNo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate serial number." ::= { hm2DevMgmtSwVersCertEntry 2 } hm2DevMgmtSwVersCertSubject OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject name." ::= { hm2DevMgmtSwVersCertEntry 3 } hm2DevMgmtSwVersCertSigAlg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate signature algorithm." ::= { hm2DevMgmtSwVersCertEntry 4 } hm2DevMgmtSwVersCertType OBJECT-TYPE SYNTAX INTEGER { production(1), development(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate type used for image verification." ::= { hm2DevMgmtSwVersCertEntry 5 } hm2DevMgmtSwVersCertStatus OBJECT-TYPE SYNTAX INTEGER { revoked(1), valid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the revocation status of the Certificate." ::= { hm2DevMgmtSwVersCertEntry 6 } hm2DevMgmtSwVersCertFingerprint OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SHA-256 certificate fingerprint." ::= { hm2DevMgmtSwVersCertEntry 7 } hm2DevMgmtSwVersTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DevMgmtSwVersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all information related to running and stored software versions on the device. The limit are 24 firmware (*.bin) files in up to 5 directory levels." ::= { hm2DeviceMgmtSoftwareVersionGroup 10 } hm2DevMgmtSwVersEntry OBJECT-TYPE SYNTAX Hm2DevMgmtSwVersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the hm2DevMgmtSwVersTable." INDEX { hm2DevMgmtSwFileLocation, hm2DevMgmtSwFileType, hm2DevMgmtSwFileIdx} ::= { hm2DevMgmtSwVersTable 1} Hm2DevMgmtSwVersEntry ::= SEQUENCE { hm2DevMgmtSwFileLocation INTEGER, hm2DevMgmtSwFileType INTEGER, hm2DevMgmtSwFileIdx Integer32, hm2DevMgmtSwFileName DisplayString, hm2DevMgmtSwVersion DisplayString, hm2DevMgmtSwMajorRelNum Integer32, hm2DevMgmtSwMinorRelNum Integer32, hm2DevMgmtSwBugfixRelNum Integer32 } hm2DevMgmtSwFileLocation OBJECT-TYPE SYNTAX INTEGER { ram (1), flash (2), sd-card (3), usb (4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the file location (ram, flash, sd-card or usb)." ::= { hm2DevMgmtSwVersEntry 1 } hm2DevMgmtSwFileType OBJECT-TYPE SYNTAX INTEGER { firmware (1), applet (2), logic (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the file type (firmware, applet, logic)." ::= { hm2DevMgmtSwVersEntry 2 } hm2DevMgmtSwFileIdx OBJECT-TYPE SYNTAX Integer32 (1..25) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index. For flash the index has the following meaning: - flash.xxx.1 = bootable version in flash (ROM) - flash.xxx.2 = backup version in flash (BAK)" ::= { hm2DevMgmtSwVersEntry 3 } hm2DevMgmtSwFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the file name." ::= { hm2DevMgmtSwVersEntry 4 } hm2DevMgmtSwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the stored software." ::= { hm2DevMgmtSwVersEntry 5 } hm2DevMgmtSwMajorRelNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the major release number of the firmware." ::= { hm2DevMgmtSwVersEntry 6 } hm2DevMgmtSwMinorRelNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the minor release number of the firmware." ::= { hm2DevMgmtSwVersEntry 7 } hm2DevMgmtSwBugfixRelNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the bug fix release number of the firmware." ::= { hm2DevMgmtSwVersEntry 8 } -- -- *********************************************************** -- hm2DeviceMgmtHardwareVersionGroup -- *********************************************************** -- hm2DevMgmtHwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the device hardware." ::= { hm2DeviceMgmtHardwareGroup 1 } hm2DevMgmtSwitchingCoreVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the device hardware." ::= { hm2DeviceMgmtHardwareGroup 2 } -- -- *********************************************************** -- hm2DeviceMgmtLogicVersionGroup -- *********************************************************** -- hm2DeviceMgmtLogicVersionGroup OBJECT IDENTIFIER ::= { hm2DeviceMgmtHardwareGroup 5 } hm2DevMgmtLogicVersTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DevMgmtLogicVersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table displays all versions of supported logic modules." ::= { hm2DeviceMgmtLogicVersionGroup 1 } hm2DevMgmtLogicVersEntry OBJECT-TYPE SYNTAX Hm2DevMgmtLogicVersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the hm2DevMgmtLogicVersTable." INDEX { hm2DevMgmtLogicIdx } ::= { hm2DevMgmtLogicVersTable 1} Hm2DevMgmtLogicVersEntry ::= SEQUENCE { hm2DevMgmtLogicIdx Integer32, hm2DevMgmtLogicAddress DisplayString, hm2DevMgmtLogicVersion DisplayString } hm2DevMgmtLogicIdx OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the module to display." ::= { hm2DevMgmtLogicVersEntry 1 } hm2DevMgmtLogicAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Address of the logic module in fpga." ::= { hm2DevMgmtLogicVersEntry 2 } hm2DevMgmtLogicVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the logic module in fpga." ::= { hm2DevMgmtLogicVersEntry 3 } -- -- *********************************************************** -- hm2DeviceMgmtTemperatureGroup -- *********************************************************** -- hm2DevMgmtTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to identify the temperature within a device in units of centigrade (Celsius)." ::= { hm2DeviceMgmtTemperatureGroup 1 } hm2DevMgmtTemperatureUpperLimit OBJECT-TYPE SYNTAX Integer32 (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a maximum level for the temperature within a device. If the temperature rises above this upper limit, the management station will be notified by a hm2DevMonStateChangeTrap trap." DEFVAL {70 } ::= { hm2DeviceMgmtTemperatureGroup 2 } hm2DevMgmtTemperatureLowerLimit OBJECT-TYPE SYNTAX Integer32 (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a minimum level for the temperature within a device. If the temperature falls below this lower limit, the management station will be notified by a hm2DevMonStateChangeTrap trap." DEFVAL { 0 } ::= { hm2DeviceMgmtTemperatureGroup 3 } -- -- hm2DevMgmtTemperatureExtTable -- hm2DevMgmtTemperatureExtTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2DevMgmtTemperatureExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to identify the temperature settings within a device." ::= { hm2DeviceMgmtTemperatureGroup 10 } hm2DevMgmtTemperatureExtEntry OBJECT-TYPE SYNTAX Hm2DevMgmtTemperatureExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the temperature table per unit." INDEX { hm2UnitIndex, hm2DevMgmtTemperatureExtType, hm2DevMgmtTemperatureExtSensorId} ::= { hm2DevMgmtTemperatureExtTable 1 } Hm2DevMgmtTemperatureExtEntry ::= SEQUENCE { hm2DevMgmtTemperatureExtType INTEGER, hm2DevMgmtTemperatureExtSensorId Integer32, hm2DevMgmtTemperatureExt Integer32, hm2DevMgmtTemperatureExtUpperLimit Integer32, hm2DevMgmtTemperatureExtLowerLimit Integer32 } hm2DevMgmtTemperatureExtType OBJECT-TYPE SYNTAX INTEGER { mainboard(1), module(2), switch(3), cpu(4), phy(5), other(10) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to identify the type of the temperature sensor." ::= { hm2DevMgmtTemperatureExtEntry 1 } hm2DevMgmtTemperatureExtSensorId OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to identify the sensor Id." ::= { hm2DevMgmtTemperatureExtEntry 2 } hm2DevMgmtTemperatureExt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to identify the temperature within a device in units of centigrade (Celsius)." ::= { hm2DevMgmtTemperatureExtEntry 3 } hm2DevMgmtTemperatureExtUpperLimit OBJECT-TYPE SYNTAX Integer32 (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a maximum level for the temperature within a device. If the temperature rises above this upper limit, the management station will be notified by a hm2DevMgmtTemperature trap." DEFVAL {70 } ::= { hm2DevMgmtTemperatureExtEntry 4 } hm2DevMgmtTemperatureExtLowerLimit OBJECT-TYPE SYNTAX Integer32 (-99..99) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a minimum level for the temperature within a device. If the temperature falls below this lower limit, the management station will be notified by a hm2DevMgmtTemperature trap." DEFVAL { 0 } ::= { hm2DevMgmtTemperatureExtEntry 5 } -- *********************************************************** -- hm2DeviceMgmtHumidityGroup -- *********************************************************** -- hm2DevMgmtHumidity OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to identify the humidity within a device." ::= { hm2DeviceMgmtHumidityGroup 1 } hm2DevMgmtHumidityUpperLimit OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a maximum level for the humidity within a device. If the humidity rises above this upper limit, the management station will be notified by a hm2DevMonStateChangeTrap trap." DEFVAL { 95 } ::= { hm2DeviceMgmtHumidityGroup 2 } hm2DevMgmtHumidityLowerLimit OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to define a minimum level for the humidity within a device. If the humidity falls below this lower limit, the management station will be notified by a hm2DevMonStateChangeTrap trap." DEFVAL { 5 } ::= { hm2DeviceMgmtHumidityGroup 3 } -- -- *********************************************************** -- hm2IfaceGroup -- *********************************************************** -- hm2IfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2IfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains extended PHY capabilities and configuration options." ::= { hm2IfaceGroup 1 } hm2IfaceEntry OBJECT-TYPE SYNTAX Hm2IfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry with the configuration options and supported features of a port." INDEX { hm2IfacePhysIndex } ::= { hm2IfaceTable 1 } Hm2IfaceEntry ::= SEQUENCE { hm2IfacePhysIndex Integer32, hm2IfacePortCapabilityBits BITS, hm2IfaceCableCrossing INTEGER, hm2IfacePowerState HmEnabledStatus, hm2IfaceAutoPowerDown INTEGER, hm2IfaceOperAdminStatus INTEGER } hm2IfacePhysIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the available physical interfaces." ::= { hm2IfaceEntry 1 } hm2IfacePortCapabilityBits OBJECT-TYPE SYNTAX BITS { manual-mdix (0), auto-mdix (1), auto-power-down (2), energy-efficient-ethernet (3), cable-test (4), poe (5), poe-plus (6), poe-ext (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "manual-mdix - port supports MDIX and MDI auto-mdix - port supports MDIX and Auto-MDIX auto-power-down - port can enter low power mode if no link is established energy-efficient-ethernet - port supports EEE cable-test - port supports cable testing poe - port supports PoE poe-plus - port supports PoE+ poe-ext - port supports PoE Extender" ::= { hm2IfaceEntry 2 } hm2IfaceCableCrossing OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdix(2), auto-mdix(3), unsupported(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable configures the cable crossing on twisted pair cables. When set to 'mdi', the device does not swap the send and receive line pairs of the TP cable for this port. When set to 'mdix', the device swaps the send and receive line pairs of the TP cable for this port. When set to 'auto-mdix', the port uses the auto crossover mode. 'Unsupported' is shown, if a port does not support cable crossing or auto-negotiation is disabled. It is not possible to set 'unsupported' to any type of port." DEFVAL { mdix } ::= { hm2IfaceEntry 3 } hm2IfacePowerState OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This variable configures the power on the interface. When set to 'enable' that means the interface-power is on (power up) When set to 'disable' that means the interface-power is off (power down) The interface power state settings have no effect if the interface admin state (ifAdminStatus) is enabled" DEFVAL { disable } ::= { hm2IfaceEntry 4 } hm2IfaceAutoPowerDown OBJECT-TYPE SYNTAX INTEGER { auto-power-down (1), no-power-save (2), energy-efficient-ethernet (3), unsupported(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable configures the automatic power save mode on the interface. When set to 'auto-power-down', the port goes in a low power mode if no link is detected. When set to 'no-power-save', the port does not use the automatic power save mode. When set to 'energy-efficient-ethernet', the port uses energy-efficient-ethernet mode to save the power. 'Unsupported' is shown, if a port does not support automatic power save mode." DEFVAL { no-power-save } ::= { hm2IfaceEntry 5 } hm2IfaceOperAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows the operational admin state of a specific interface. The operational state could be different to the ifAdminStatus if the interface is forced to down by other means like hm2AutoDisableIntfOperState." ::= { hm2IfaceEntry 6 } -- -- *********************************************************** -- hm2IfaceLayoutTable -- *********************************************************** -- hm2IfaceLayoutTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2IfaceLayoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table does contain the layout of the interface modules or blocks. It contains all possible physical and logical items. This table can be used to determine any interface index according to 'IfEntry' that may exist and the name of this interface. " ::= { hm2IfaceGroup 2 } hm2IfaceLayoutEntry OBJECT-TYPE SYNTAX Hm2IfaceLayoutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of a module or block of interfaces." INDEX { hm2IfaceLayoutIndex } ::= { hm2IfaceLayoutTable 1 } Hm2IfaceLayoutEntry ::= SEQUENCE { hm2IfaceLayoutIndex Integer32, hm2IfaceLayoutStartIfIndex InterfaceIndexOrZero, hm2IfaceLayoutEndIfIndex InterfaceIndexOrZero, hm2IfaceLayoutModuleCapacity Unsigned32, hm2IfaceLayoutModulePortCapacity Unsigned32, hm2IfaceLayoutFormat SnmpAdminString, hm2IfaceLayoutIfIndexType IANAifType } hm2IfaceLayoutIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index used for this table." ::= { hm2IfaceLayoutEntry 1 } hm2IfaceLayoutStartIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the first interface index of this block or module." ::= { hm2IfaceLayoutEntry 2 } hm2IfaceLayoutEndIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the last interface index of this block or module that can exist for this particular device. The amount of interfaces between first and last may not be equal than to the maximum interface per module." ::= { hm2IfaceLayoutEntry 3 } hm2IfaceLayoutModuleCapacity OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is the Number of modules in that block. Currently not used and it is always 0." ::= { hm2IfaceLayoutEntry 4 } hm2IfaceLayoutModulePortCapacity OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of interfaces that one module can contain. Currently not used and it is always 0" ::= { hm2IfaceLayoutEntry 5 } hm2IfaceLayoutFormat OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies a format string that can be used to determine the textual representation of an interface in this block. following wildcards are supported: %i the absolute interface number according to 'IfEntry'. %p the relative number based on hm2IfaceLayoutStartIfIndex %s the block number from 'hm2IfaceLayoutIndex' %vid the vlan of the routing interface %lre the name of the redundancy port (prp or hsr)" ::= { hm2IfaceLayoutEntry 6 } hm2IfaceLayoutIfIndexType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the interfaces in that block according to IANA-Type table." ::= { hm2IfaceLayoutEntry 7 } -- -- *********************************************************** -- hm2IfaceExtTable -- *********************************************************** -- hm2IfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2IfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional information about the interfaces." ::= { hm2IfaceGroup 3 } hm2IfaceExtEntry OBJECT-TYPE SYNTAX Hm2IfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { ifIndex } ::= { hm2IfaceExtTable 1 } Hm2IfaceExtEntry ::= SEQUENCE { hm2IfaceExtIfRole INTEGER } hm2IfaceExtIfRole OBJECT-TYPE SYNTAX INTEGER { ethernetCsmacd (6), softwareLoopback (24), l3ipvlan (136), ieee8023adLag (161), shdsl (169), ringPort (1001), subringPort (1002), couplingPort (1003), routerPort (1004), probePort (1005), cpuPort (1006), servicePort (1007), outOfBandMgmtPort (1008), lagMember (1101), lreMember (1102), lreInterface (1201), ringLagInterface (1202) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current role of the interface." ::= { hm2IfaceExtEntry 1 } -- -- *********************************************************** -- hm2SfpGroup -- *********************************************************** -- hm2SfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2SfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables for each SFP." ::= { hm2SfpGroup 1 } hm2SfpInfoEntry OBJECT-TYPE SYNTAX Hm2SfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for a detected SFP." INDEX { ifIndex } ::= { hm2SfpInfoTable 1 } Hm2SfpInfoEntry ::= SEQUENCE { hm2SfpModuleType INTEGER, hm2SfpMediaType INTEGER, hm2SfpConnector INTEGER, hm2SfpVendorName SnmpAdminString, hm2SfpVendorOUI OCTET STRING, hm2SfpPartNumber SnmpAdminString, hm2SfpPartRev SnmpAdminString, hm2SfpSerialNum SnmpAdminString, hm2SfpDateCode SnmpAdminString, hm2SfpInfoVersion Integer32, hm2SfpInfoPartNumber SnmpAdminString, hm2SfpInfoPartId SnmpAdminString, hm2SfpBitRateNominal Integer32, hm2SfpBitRateMin Integer32, hm2SfpBitRateMax Integer32, hm2SfpMaxLength-fiber-9 Integer32, hm2SfpMaxLength-fiber-50 Integer32, hm2SfpMaxLength-fiber-e50 Integer32, hm2SfpMaxLength-fiber-62-5 Integer32, hm2SfpMaxLength-copper Integer32, hm2SfpWaveLength Integer32, hm2SfpWaveLengthTolerance Integer32, hm2SfpEnhancedOptions BITS, hm2SfpSupported TruthValue, hm2SfpSupportedReason INTEGER } hm2SfpModuleType OBJECT-TYPE SYNTAX INTEGER { sfp(3), xfp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the module. SFP or SFP+ (3), XFP (6)." ::= { hm2SfpInfoEntry 1 } hm2SfpMediaType OBJECT-TYPE SYNTAX INTEGER { ge-1000-base-sx (1), ge-1000-base-lx (2), ge-1000-base-cx (4), fe-100base-lx (5), fe-100base-fx (6), ge-1000-base-t (8), unsupported (9), oc3-mm-sr (10), oc3-sm-ir (11), oc3-sm-lr (12), oc12-mm-sr (13), oc12-sm-ir (14), oc12-sm-lr (15), oc48-sr (16), oc48-ir (17), oc48-lr (18), xfp-10gbase-sr(30), xfp-10gbase-lr(31), xfp-10gbase-er(32), microfx(40), pof(41), m-sfp-2500(50) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Media Type" ::= { hm2SfpInfoEntry 2 } hm2SfpConnector OBJECT-TYPE SYNTAX INTEGER { nonSfp (1), fiberjack (6), lc (7), mtrj (8), opticalPigtail (11), copperPigtail (33), rj45 (34), vendorSpecific (128) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Connector Type." ::= { hm2SfpInfoEntry 3 } hm2SfpVendorName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's vendor name (ASCII)." ::= { hm2SfpInfoEntry 4 } hm2SfpVendorOUI OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor organizationally unique identifier field (OUI)." ::= { hm2SfpInfoEntry 5 } hm2SfpPartNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of the module (ASCII)." ::= { hm2SfpInfoEntry 6 } hm2SfpPartRev OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number of the module (ASCII)." ::= { hm2SfpInfoEntry 7 } hm2SfpSerialNum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's serial number provided by vendor (ASCII)." ::= { hm2SfpInfoEntry 8 } hm2SfpDateCode OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's vendor manufacturing date code. Format is YY:MM:DD." ::= { hm2SfpInfoEntry 9 } hm2SfpInfoVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Version of SFP's Hirschmann information. Contains -1 in case of a device read error." ::= { hm2SfpInfoEntry 10 } hm2SfpInfoPartNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "Part Number of SFP's Hirschmann information." ::= { hm2SfpInfoEntry 11 } hm2SfpInfoPartId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Part Identifier of SFP's Hirschmann information." ::= { hm2SfpInfoEntry 12 } hm2SfpBitRateNominal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's nominal bitrate in units of MBits/sec. Contains -1 in case of a device read error." ::= { hm2SfpInfoEntry 13 } hm2SfpBitRateMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum bit rate is specified in units of 100 Megabits per second, rounded off to the nearest 100 Megabits per second. A value of 0 indicates that the minimum bit rate is not specified." ::= { hm2SfpInfoEntry 14 } hm2SfpBitRateMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum bit rate is specified in units of 100 Megabits per second, rounded off to the nearest 100 Megabits per second. A value of 0 indicates that the maximum bit rate is not specified." ::= { hm2SfpInfoEntry 15 } hm2SfpMaxLength-fiber-9 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max. usable length for the cable type '9/125 micrometer fiber' with this SFP in units of meters." ::= { hm2SfpInfoEntry 16 } hm2SfpMaxLength-fiber-50 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max. usable length for the cable type '50/125 micrometer fiber' with this SFP in units of meters." ::= { hm2SfpInfoEntry 17 } hm2SfpMaxLength-fiber-e50 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max. usable length for the cable type 'EBW 50/125 micrometer fiber' with this SFP in units of meters or -1 if not supported." ::= { hm2SfpInfoEntry 18 } hm2SfpMaxLength-fiber-62-5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max. usable length for the cable type '62.5/125 micrometer fiber' with this SFP in units of meters." ::= { hm2SfpInfoEntry 19 } hm2SfpMaxLength-copper OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max. usable length for the cable type 'copper' with this SFP in units of meters." ::= { hm2SfpInfoEntry 20 } hm2SfpWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Nominal transmitter output wavelength at room temperature. The laser wavelength in nm (units of 0.05nm)." ::= { hm2SfpInfoEntry 21 } hm2SfpWaveLengthTolerance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The +/- range of transmitter output wavelength under normal operating conditions or -1 if not supported." ::= { hm2SfpInfoEntry 22 } hm2SfpEnhancedOptions OBJECT-TYPE SYNTAX BITS { none(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Not supported." ::= { hm2SfpInfoEntry 23 } hm2SfpSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP is supported by the device (true) or not (false)." ::= { hm2SfpInfoEntry 24 } hm2SfpSupportedReason OBJECT-TYPE SYNTAX INTEGER{ hirschmannID (1), whiteList (2), wrongSpeed (3), noneEthernet (4), tpSfpNotSupported (5), otnID (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason why this SFP is supported." ::= { hm2SfpInfoEntry 25 } hm2SfpDiagTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2SfpDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables for each SFP." ::= { hm2SfpGroup 2 } hm2SfpDiagEntry OBJECT-TYPE SYNTAX Hm2SfpDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for a detected SFP." INDEX { ifIndex } ::= { hm2SfpDiagTable 1 } Hm2SfpDiagEntry ::= SEQUENCE { hm2SfpCurrentBitRate Integer32, hm2SfpCurrentTemperature Integer32, hm2SfpCurrentTxPower Integer32, hm2SfpCurrentRxPower Integer32, hm2SfpCurrentTxPowerdBm SnmpAdminString, hm2SfpCurrentRxPowerdBm SnmpAdminString, hm2SfpCurrentRxPowerState INTEGER } hm2SfpCurrentBitRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current bit rate in units of Megabits per second." ::= { hm2SfpDiagEntry 1 } hm2SfpCurrentTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This signed integer is used to identify the temperature within the SFP in units of centigrade (Celsius). Contains -1000 in case of a device read error." ::= { hm2SfpDiagEntry 2 } hm2SfpCurrentTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's internally measured Tx Power in units of 1/10 microwatt or -1 if it is not supported." ::= { hm2SfpDiagEntry 3} hm2SfpCurrentRxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's internally measured Rx Power in units of 1/10 microWatts or -10000 if not supportted." ::= { hm2SfpDiagEntry 4} hm2SfpCurrentTxPowerdBm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's internally measured Tx Power in units of dBm. (ASCII representation of a floating point number). - if not supported." ::= { hm2SfpDiagEntry 5} hm2SfpCurrentRxPowerdBm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's internally measured Rx Power in units of dBm. (ASCII representation of a floating point number). - if not supported." ::= { hm2SfpDiagEntry 6} hm2SfpCurrentRxPowerState OBJECT-TYPE SYNTAX INTEGER { ok(1), warning(2), alarm(3), unsupported(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the SFP's internally measured Rx." ::= { hm2SfpDiagEntry 7} hm2SfpWLGroup OBJECT IDENTIFIER ::= { hm2SfpGroup 3 } hm2SfpWLStatus OBJECT-TYPE SYNTAX INTEGER { present(1), absent(2), not-supported(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the SFP White List. present(1): a white list is present on the device absent(2): no white list is present on the device not-supported(3): white list feature is not supported in this device" ::= { hm2SfpWLGroup 1 } hm2SfpThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2SfpThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the thresholds for each SFP." ::= { hm2SfpGroup 4 } hm2SfpThresholdEntry OBJECT-TYPE SYNTAX Hm2SfpThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for a detected SFP." INDEX { ifIndex } ::= { hm2SfpThresholdTable 1 } Hm2SfpThresholdEntry ::= SEQUENCE { hm2SfpTemperatureHighAlarm Integer32, hm2SfpTemperatureHighWarning Integer32, hm2SfpTemperatureLowAlarm Integer32, hm2SfpTemperatureLowWarning Integer32, hm2SfpTxPowerHighAlarm Integer32, hm2SfpTxPowerHighWarning Integer32, hm2SfpTxPowerLowAlarm Integer32, hm2SfpTxPowerLowWarning Integer32, hm2SfpRxPowerHighAlarm Integer32, hm2SfpRxPowerHighWarning Integer32, hm2SfpRxPowerLowAlarm Integer32, hm2SfpRxPowerLowWarning Integer32, hm2SfpTxPowerdBmHighAlarm SnmpAdminString, hm2SfpTxPowerdBmHighWarning SnmpAdminString, hm2SfpTxPowerdBmLowAlarm SnmpAdminString, hm2SfpTxPowerdBmLowWarning SnmpAdminString, hm2SfpRxPowerdBmHighAlarm SnmpAdminString, hm2SfpRxPowerdBmHighWarning SnmpAdminString, hm2SfpRxPowerdBmLowAlarm SnmpAdminString, hm2SfpRxPowerdBmLowWarning SnmpAdminString } hm2SfpTemperatureHighAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Temperature High Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 1} hm2SfpTemperatureHighWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Temperature High Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 2} hm2SfpTemperatureLowAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Temperature Low Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 3} hm2SfpTemperatureLowWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Temperature Low Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 4} hm2SfpTxPowerHighAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 5} hm2SfpTxPowerHighWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 6} hm2SfpTxPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 7} hm2SfpTxPowerLowWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 8} hm2SfpRxPowerHighAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 9} hm2SfpRxPowerHighWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 10} hm2SfpRxPowerLowAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 11} hm2SfpRxPowerLowWarning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 12} hm2SfpTxPowerdBmHighAlarm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 13} hm2SfpTxPowerdBmHighWarning OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 14} hm2SfpTxPowerdBmLowAlarm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 15} hm2SfpTxPowerdBmLowWarning OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Tx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 16} hm2SfpRxPowerdBmHighAlarm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 17} hm2SfpRxPowerdBmHighWarning OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 18} hm2SfpRxPowerdBmLowAlarm OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 19} hm2SfpRxPowerdBmLowWarning OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SFP's Rx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in case of a device read error." ::= { hm2SfpThresholdEntry 20} -- -- *********************************************************** -- hm2ExtNvmGroup -- *********************************************************** -- hm2ExtNvmGeneralGroup OBJECT IDENTIFIER ::= { hm2ExtNvmGroup 1 } hm2ExtNvmChooseActive OBJECT-TYPE SYNTAX Hm2DeviceExtNVMType MAX-ACCESS read-write STATUS current DESCRIPTION "The user can choose which external NV memory to use for file operations." DEFVAL { sd } ::= { hm2ExtNvmGeneralGroup 1 } hm2ExtNvmLogDevice OBJECT-TYPE SYNTAX Hm2DeviceExtNVMType MAX-ACCESS read-write STATUS current DESCRIPTION "The user can choose which external NV memory to use for persistent logging." DEFVAL { sd } ::= { hm2ExtNvmGeneralGroup 2 } hm2ExtNvmAdminMode OBJECT-TYPE SYNTAX INTEGER { normal(1), compatibility(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switches the USB bus between High Speed (normal) and Full Speed (compatibility). This setting only takes effect after a reboot." DEFVAL { normal } ::= { hm2ExtNvmGeneralGroup 3 } hm2ExtNvmOperMode OBJECT-TYPE SYNTAX INTEGER { normal(1), compatibility(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the USB mode the device is currently operating in." ::= { hm2ExtNvmGeneralGroup 4 } hm2ExtNvmTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2ExtNvmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains variables for each nvram." ::= { hm2ExtNvmGroup 2 } hm2ExtNvmEntry OBJECT-TYPE SYNTAX Hm2ExtNvmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for an external nvram." INDEX { hm2ExtNvmTableIndex } ::= { hm2ExtNvmTable 1 } Hm2ExtNvmEntry ::= SEQUENCE { hm2ExtNvmTableIndex Hm2DeviceExtNVMType, hm2ExtNvmStatus INTEGER, hm2ExtNvmManufacturerId DisplayString, hm2ExtNvmHWRevision DisplayString, hm2ExtNvmProductName DisplayString, hm2ExtNvmVersion DisplayString, hm2ExtNvmSerialNum DisplayString, hm2ExtNvmAutomaticSoftwareLoad HmEnabledStatus, hm2ExtNvmConfigLoadPriority INTEGER, hm2ExtNvmConfigSave HmEnabledStatus, hm2ExtNvmWritable HmEnabledStatus, hm2ExtNvmAutomaticSshKeyLoad HmEnabledStatus } hm2ExtNvmTableIndex OBJECT-TYPE SYNTAX Hm2DeviceExtNVMType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { hm2ExtNvmEntry 1 } hm2ExtNvmStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), removed(2), ok(3), outOfMemory(4), genericErr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the external non-volatile memory. notPresent(1): external non-volatile memory has not been detected. removed(2): external non-volatile memory was removed in running mode of the agent. ok(3): external non-volatile memory is present and OK. outOfMemory(4): external non-volatile memory is full. genericErr(5): Any other failure, e.g. hardware malfunction." ::= { hm2ExtNvmEntry 2 } hm2ExtNvmManufacturerId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer ID." ::= { hm2ExtNvmEntry 3 } hm2ExtNvmHWRevision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The application ID." ::= { hm2ExtNvmEntry 4 } hm2ExtNvmProductName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The product name." ::= { hm2ExtNvmEntry 5 } hm2ExtNvmVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version." ::= { hm2ExtNvmEntry 6 } hm2ExtNvmSerialNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number provided by vendor (ASCII)." ::= { hm2ExtNvmEntry 7 } hm2ExtNvmAutomaticSoftwareLoad OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Automatic loading of a software image from the external non-volatile memory. A file named 'startup.txt' must be present on the external non-volatile memory and contain the line 'autoUpdate=filename'." DEFVAL { enable } ::= { hm2ExtNvmEntry 8 } hm2ExtNvmConfigLoadPriority OBJECT-TYPE SYNTAX INTEGER { disable(0), first(1), second(2), third(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the priority of this external non-volatile memory for loading the configuration while booting. The configuration on the device with the lowest priority is loaded. Setting this variable to 0 disables loading of a configuration from this device." ::= { hm2ExtNvmEntry 9 } hm2ExtNvmConfigSave OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Automatic saving of the configuration to the external non-volatile memory. If this is enabled, saving the configuration of the device to its internal nvram also stores in on this external nvram." DEFVAL { enable } ::= { hm2ExtNvmEntry 10 } hm2ExtNvmWritable OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if writing to the device is possible, i.e. if it is write protected." ::= { hm2ExtNvmEntry 11 } hm2ExtNvmAutomaticSshKeyLoad OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable automatic loading of a SSH key from the external non-volatile memory. A file named 'startup.txt' must be present on the external non-volatile memory and contain the line 'autoUpdateRSA=' and/or 'autoUpdateDSA='." DEFVAL { enable } ::= { hm2ExtNvmEntry 12 } -- -- *********************************************************** -- hm2AutoDisableGroup -- *********************************************************** -- hm2AutoDisableIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AutoDisableIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Auto Disable interface table." ::= { hm2AutoDisableGroup 1 } hm2AutoDisableIntfEntry OBJECT-TYPE SYNTAX Hm2AutoDisableIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Auto Disable interface entry." INDEX { ifIndex } ::= { hm2AutoDisableIntfTable 1 } Hm2AutoDisableIntfEntry ::= SEQUENCE { hm2AutoDisableIntfRemainingTime Unsigned32, hm2AutoDisableIntfComponentName SnmpAdminString, hm2AutoDisableIntfErrorReason INTEGER, hm2AutoDisableIntfTimer Unsigned32, hm2AutoDisableIntfReset TruthValue, hm2AutoDisableIntfOperState INTEGER, hm2AutoDisableIntfErrorTime HmTimeSeconds1970 } hm2AutoDisableIntfRemainingTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time in seconds until the re-activation of the port." DEFVAL {0} ::= { hm2AutoDisableIntfEntry 1} hm2AutoDisableIntfComponentName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the component that triggered the error" ::= { hm2AutoDisableIntfEntry 2} hm2AutoDisableIntfErrorReason OBJECT-TYPE SYNTAX INTEGER { none(0), link-flap(1), crc-error(2), duplex-mismatch(3), dhcp-snooping(4), arp-rate(5), bpdu-rate(6), mac-based-port-security(7), overload-detection(8), speed-duplex(9), loop-protection(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Error disable reason" ::= { hm2AutoDisableIntfEntry 3} hm2AutoDisableIntfTimer OBJECT-TYPE SYNTAX Unsigned32 (0|30..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value in seconds after a deactivated port is activated again. Possible values are: 30-4294967295. A value of 0 disables the timer." DEFVAL {0} ::= {hm2AutoDisableIntfEntry 4} hm2AutoDisableIntfReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Port Auto Disable interface reset." DEFVAL { false } ::= { hm2AutoDisableIntfEntry 5 } hm2AutoDisableIntfOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of Auto Disable interface admin state. Active means that a component has encountered an error and Auto-Disable has turned off the interface. Inactive means that currently there is no error" DEFVAL {inactive} ::= { hm2AutoDisableIntfEntry 6 } hm2AutoDisableIntfErrorTime OBJECT-TYPE SYNTAX HmTimeSeconds1970 MAX-ACCESS read-only STATUS current DESCRIPTION "Local system time (hm2SystemLocalTime) when the error occured." ::= {hm2AutoDisableIntfEntry 7} hm2AutoDisableReasonTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2AutoDisableReasonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Possible reasons for Auto Disable" ::= { hm2AutoDisableGroup 2 } hm2AutoDisableReasonEntry OBJECT-TYPE SYNTAX Hm2AutoDisableReasonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Auto Disable interface entry." INDEX { hm2AutoDisableReasons } ::= { hm2AutoDisableReasonTable 1 } Hm2AutoDisableReasonEntry ::= SEQUENCE { hm2AutoDisableReasons INTEGER, hm2AutoDisableReasonOperation HmEnabledStatus, hm2AutoDisableReasonCategory INTEGER } hm2AutoDisableReasons OBJECT-TYPE SYNTAX INTEGER { link-flap(1), crc-error(2), duplex-mismatch(3), dhcp-snooping(4), arp-rate(5), bpdu-rate(6), mac-based-port-security(7), overload-detection(8), speed-duplex(9), loop-protection(10) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reason for deactivation a port" ::= { hm2AutoDisableReasonEntry 1} hm2AutoDisableReasonOperation OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables recovery by resaon on this device." DEFVAL { disable } ::= { hm2AutoDisableReasonEntry 2 } hm2AutoDisableReasonCategory OBJECT-TYPE SYNTAX INTEGER { other(1), port-monitor(2), network-security(3), l2-redundancy(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Auto Disable Reason Category" ::= { hm2AutoDisableReasonEntry 3} -- -- *********************************************************** -- hm2UnitGroup -- *********************************************************** -- -- Unit table hm2UnitTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2UnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains unit capabilities and configuration options." ::= { hm2UnitGroup 100 } hm2UnitEntry OBJECT-TYPE SYNTAX Hm2UnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry with the configuration options and supported features of a unit." INDEX { hm2UnitIndex } ::= { hm2UnitTable 1 } Hm2UnitEntry ::= SEQUENCE { hm2UnitIndex Integer32, hm2UnitMaxModuleCapacity Integer32, hm2UnitMaxModulePortCapacity Integer32 } hm2UnitIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the available unit." ::= { hm2UnitEntry 1 } hm2UnitMaxModuleCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of modules that this unit can contain in this system." ::= { hm2UnitEntry 2 } hm2UnitMaxModulePortCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of ports that a module can contain in this unit." ::= { hm2UnitEntry 3 } -- -- *********************************************************** -- hm2ModuleGroup -- *********************************************************** -- -- Module table hm2ModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF Hm2ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains capabilities and configuration options of device modules." ::= { hm2ModuleGroup 100 } hm2ModuleEntry OBJECT-TYPE SYNTAX Hm2ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry with the configuration options and supported features of a device module." INDEX { hm2UnitIndex, hm2ModuleIndex } ::= { hm2ModuleTable 1 } Hm2ModuleEntry ::= SEQUENCE { hm2ModuleIndex Integer32, hm2ModuleId OBJECT IDENTIFIER, hm2ModuleDescription SnmpAdminString, hm2ModuleProductCode SnmpAdminString, hm2ModuleVersion SnmpAdminString, hm2ModuleNumOfPorts Integer32, hm2ModuleFirstMauIndex Integer32, hm2ModuleStatus INTEGER, hm2ModuleSerialNum SnmpAdminString, hm2ModuleMinSWVersion Integer32, hm2ModuleCapability BITS, hm2ModuleInternalID Integer32, hm2ModuleInternalIDVariant Integer32, hm2ModuleFirstIfIndex Integer32, hm2ModuleAdminState HmEnabledStatus } hm2ModuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the available module." ::= { hm2ModuleEntry 1 } hm2ModuleId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturer-defined product identifier (module family + product ID). Example: Object-ID 1.3.6.1.4.1.248.11.2.2.1 is the hm2ModuleFamily MSM and Object-ID 1.3.6.1.4.1.248.11.2.2.1.1 is the Product ID for msm-4tx" ::= { hm2ModuleEntry 2 } hm2ModuleDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Description of the module. This value cannot be written by external entities (only for internal purposes)." ::= { hm2ModuleEntry 3 } hm2ModuleProductCode OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Product Code of the module." ::= { hm2ModuleEntry 4 } hm2ModuleVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the module." ::= { hm2ModuleEntry 5 } hm2ModuleNumOfPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The numberOfPorts is the number of ports contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to numberOfPorts." ::= { hm2ModuleEntry 6 } hm2ModuleFirstMauIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Value of the first mauIndex used by the module. **NOTE: This object is obsolete in favour of hm2ModuleFirstIfIndex.**" ::= { hm2ModuleEntry 7 } hm2ModuleStatus OBJECT-TYPE SYNTAX INTEGER { physical (1), configurable (2), remove (3), fix (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the module. If the value is physical(1), then the module is plugged in, if the value is configurable, the ports can be configured, but the card is absent, with the value remove(3) written to the agent the card can be logically removed. The value fix(4) is for modules which cannot be removed." ::= { hm2ModuleEntry 8 } hm2ModuleSerialNum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number provided by vendor (ASCII)." ::= { hm2ModuleEntry 9 } hm2ModuleMinSWVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum software version required to support this module." ::= { hm2ModuleEntry 10 } hm2ModuleCapability OBJECT-TYPE SYNTAX BITS { poe(0), fpga(1), ptp(2), io-module(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "poe - module supports Power over Ethernet, fpga - module has a FPGA, ptp - module supports PTP, io-module - module is an IO module. This value cannot be written by external entities (only for internal purposes)." ::= { hm2ModuleEntry 11 } hm2ModuleInternalID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "An internal ID of the Module. This value cannot be written by external entities (only for internal purposes)." DEFVAL { 0 } ::= { hm2ModuleEntry 12 } hm2ModuleInternalIDVariant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "An internal variant ID of the Module. **NOTE: This object is obsolete.**" DEFVAL { 0 } ::= { hm2ModuleEntry 13 } hm2ModuleFirstIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the first ifIndex used by the module." ::= { hm2ModuleEntry 14 } hm2ModuleAdminState OBJECT-TYPE SYNTAX HmEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the module. If disabled, module plugged in this slot will not be activated. " DEFVAL { enable } ::= { hm2ModuleEntry 15 } -- -- *********************************************************** -- hm2DeviceMgmtMibNotifications -- *********************************************************** -- hm2SfpChangeTrap NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap is sent when a SFP has been added or removed. It is also sent for an otherwise unsupported SFP." ::= { hm2DeviceMgmtMibNotifications 1 } hm2AutoDisablePortTrap NOTIFICATION-TYPE OBJECTS { ifIndex, hm2IfaceOperAdminStatus, hm2AutoDisableIntfErrorReason } STATUS current DESCRIPTION "This trap is sent if the port has been disabled or enabled by auto disable feature." ::= { hm2DeviceMgmtMibNotifications 2 } hm2ModulePluggedTrap NOTIFICATION-TYPE OBJECTS { hm2UnitIndex, hm2ModuleIndex } STATUS current DESCRIPTION "This trap is sent if a module is plugged into a unit." ::= { hm2DeviceMgmtMibNotifications 3 } hm2ModuleRemovedTrap NOTIFICATION-TYPE OBJECTS { hm2UnitIndex, hm2ModuleIndex } STATUS current DESCRIPTION "This trap is sent if a module is removed from a unit." ::= { hm2DeviceMgmtMibNotifications 4 } hm2SFPRxPowerChangeTrap NOTIFICATION-TYPE OBJECTS { hm2SfpCurrentRxPowerState } STATUS current DESCRIPTION "This trap is sent when the state (hm2SfpCurrentRxPowerState) of the rx power of a SFP changes." ::= { hm2DeviceMgmtMibNotifications 5 } END