HIRSCHMANN-GENERIC-ERROR-MIB DEFINITIONS ::= BEGIN -- -- *********************************************************** -- Hirschmann Generic-Error MIB -- *********************************************************** -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, enterprises, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, AutonomousType, TestAndIncr FROM SNMPv2-TC; hirschmann OBJECT IDENTIFIER ::= { enterprises 248 } hmMgmtSEEErrorIDGroup OBJECT IDENTIFIER ::= { enterprises hirschmann(248) hmManagement(16) 2 } hmMgmtSEInfoIDGroup OBJECT IDENTIFIER ::= { enterprises hirschmann(248) hmManagement(16) 3 } -- -- *********************************************************** -- hmMgmtSEEErrorIDGroup -- *********************************************************** -- hmRedundancyConflict OBJECT-IDENTITY STATUS current DESCRIPTION "Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1}." ::= { hmMgmtSEEErrorIDGroup 1 } hmRedundancyConflictPort OBJECT-IDENTITY STATUS current DESCRIPTION "Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1} on Ring Port {2}." ::= { hmMgmtSEEErrorIDGroup 2 } hmMaxNumExceeded OBJECT-IDENTITY STATUS current DESCRIPTION "Max. number exceeded for {0}." ::= { hmMgmtSEEErrorIDGroup 3 } hmAlreadyCreated OBJECT-IDENTITY STATUS current DESCRIPTION "Instance already created." ::= { hmMgmtSEEErrorIDGroup 4 } hmRedundancyConflictFpgaPort OBJECT-IDENTITY STATUS current DESCRIPTION "Conflict Redundancy Protocols: Cannot enable {0} on configured ports." ::= { hmMgmtSEEErrorIDGroup 5 } hmGenericEnableConflict OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot enable {0} because {1} is enabled." ::= { hmMgmtSEEErrorIDGroup 6 } hmRedundancyConflictPortShort OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot enable {0} on configured ports. Reason: {1}" ::= { hmMgmtSEEErrorIDGroup 7 } -- hmTableFullError - Cannot add more rows to a table. hmTableFullError OBJECT-IDENTITY STATUS current DESCRIPTION "{0} table is full. Maximum allowed: {1}." ::= { hmMgmtSEEErrorIDGroup 8 } hmFunctionNotUsableWithInterface OBJECT-IDENTITY STATUS current DESCRIPTION "This function cannot be used with this interface." ::= { hmMgmtSEEErrorIDGroup 9 } -- general conflict hmGeneralConflict OBJECT-IDENTITY STATUS current DESCRIPTION "{0} conflicts with {1}. {2}." ::= { hmMgmtSEEErrorIDGroup 10 } hmGeneralExceededRange OBJECT-IDENTITY STATUS current DESCRIPTION "The {0} is exceeding the range. Maximum permissable range is {1}..{2}." ::= { hmMgmtSEEErrorIDGroup 11 } hmGenericDisableConflict OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot disable {0}, because {1} is using it." ::= { hmMgmtSEEErrorIDGroup 12 } -- hmMgmtSEEErrorIDGroup 100 - RMON Group hmRmonAlarmTableFullErrorReturn OBJECT-IDENTITY STATUS current DESCRIPTION "Alarm table full. Only {0} entries are allowed." ::= { hmMgmtSEEErrorIDGroup 100 } -- hmMgmtSEEErrorIDGroup 200 - MGMT Group hmMgmtUdpPortInUse OBJECT-IDENTITY STATUS current DESCRIPTION "Given UDP port is already in use." ::= { hmMgmtSEEErrorIDGroup 200 } hmMgmtTcpPortInUse OBJECT-IDENTITY STATUS current DESCRIPTION "Given TCP port is already in use." ::= { hmMgmtSEEErrorIDGroup 201 } hmMgmtIPAddressConflictWithMgmtIP OBJECT-IDENTITY STATUS current DESCRIPTION "Given IP address/netmask {0}/{1} conflicts with the management IP address/netmask." ::= { hmMgmtSEEErrorIDGroup 202 } hmMgmtIPAddressConflictWithOobIP OBJECT-IDENTITY STATUS current DESCRIPTION "Given IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask." ::= { hmMgmtSEEErrorIDGroup 203 } hmMgmtIPAddressConflictWithRouterIP OBJECT-IDENTITY STATUS current DESCRIPTION "Given IP address/netmask {0}/{1} conflicts with a routing interface IP address/netmask." ::= { hmMgmtSEEErrorIDGroup 204 } hmMgmtIPAddressConflictWithOobUsbIP OBJECT-IDENTITY STATUS current DESCRIPTION "Given IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask with USB connection." ::= { hmMgmtSEEErrorIDGroup 205 } -- hmMgmtSEEErrorIDGroup 300 - MGMT Group hm2NetIPAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "The {0} IP address is not valid." ::= { hmMgmtSEEErrorIDGroup 300 } hm2NetIPAddrAndGateway OBJECT-IDENTITY STATUS current DESCRIPTION "Management IP address and gateway are not on the same subnet." ::= { hmMgmtSEEErrorIDGroup 301 } hm2NetIPAddrAndSubnet OBJECT-IDENTITY STATUS current DESCRIPTION "The {0} IP address and subnet mask combination is not valid." ::= { hmMgmtSEEErrorIDGroup 302 } hm2NetPrefixLengthInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Subnet mask must have contiguous ones and be no longer than 30 bits." ::= { hmMgmtSEEErrorIDGroup 303 } hm2VlanIdNotExists OBJECT-IDENTITY STATUS current DESCRIPTION "VLAN {0} does not exist. Please create VLAN {1} before using it." ::= { hmMgmtSEEErrorIDGroup 304 } -- hmMgmtSEEErrorIDGroup 400 - IPv6 Group hm2NetIPv6AddressAlreadyExists OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot add IPv6 Address because it already exists." ::= { hmMgmtSEEErrorIDGroup 400 } hm2NetIPv6ChangeEUIWhileEntryActive OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot change IPv6 EUI flag while entry is still active." ::= { hmMgmtSEEErrorIDGroup 401 } hm2NetIPv6ChangeAddressWhileEntryActive OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot change IPv6 address while entry is still active." ::= { hmMgmtSEEErrorIDGroup 402 } hm2NetIPv6IncorrectFamilyType OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot insert an incorrect address type." ::= { hmMgmtSEEErrorIDGroup 403 } hm2NetIPv6EnableEUIWhilePrefixLenNot64 OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot Enable EUI while prefix length value not equal to 64." ::= { hmMgmtSEEErrorIDGroup 404 } hm2NetIPv6ChangeAddressOrigin OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot change address origin value." ::= { hmMgmtSEEErrorIDGroup 405 } hm2NetIPv6MaximumNumberStaticAddresses OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot insert more than the alloted maximum number of static entries." ::= { hmMgmtSEEErrorIDGroup 406 } hm2NetIPv6IncorrectAddressLength OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot use an IPv6 address with an incorrect length." ::= { hmMgmtSEEErrorIDGroup 407 } hm2NetIPv6AddressPrefixNotMatching OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot add IPv6 entry if the prefix and address do not match." ::= { hmMgmtSEEErrorIDGroup 408 } hm2NetIPv6PrefixNotSupported OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot add IPv6 entry if the used prefix is 127." ::= { hmMgmtSEEErrorIDGroup 409 } hm2NetIPv6CannotAddReservedAddress OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot add an IPv6 reserved address." ::= { hmMgmtSEEErrorIDGroup 410 } hm2EntryLenCharset OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the chosen entry name uses not allowed character(s). Allowed are alphanumerical characters and name size from 1 to 32." ::= { hmMgmtSEEErrorIDGroup 411 } hm2UserPwdLen OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the chosen password is incorrect. Check length, policy matching." ::= { hmMgmtSEEErrorIDGroup 412 } hm2EntryNotExist OBJECT-IDENTITY STATUS current DESCRIPTION "User does not exist." ::= { hmMgmtSEEErrorIDGroup 413 } hm2MaxNumUserExceeded OBJECT-IDENTITY STATUS current DESCRIPTION "Max. number of user exceeded." ::= { hmMgmtSEEErrorIDGroup 414 } hm2NetIPv6UnreachableGatewaySubnet OBJECT-IDENTITY STATUS current DESCRIPTION "Cannot set the IPv6 gateway from an unreachable subnet." ::= { hmMgmtSEEErrorIDGroup 415 } hm2GenericDeleteError OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the entry cannot be deleted." ::= { hmMgmtSEEErrorIDGroup 450 } hm2GenericCreateError OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the entry cannot be created." ::= { hmMgmtSEEErrorIDGroup 451 } hm2GenericEntryNotExist OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the entry does not exists." ::= { hmMgmtSEEErrorIDGroup 452 } hm2GenericIPv4IPv6Supported OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that only IPv4 or IPv6 address types are supported." ::= { hmMgmtSEEErrorIDGroup 453 } hm2GenericMulticastAddrNotAllowed OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the multicast address type is not allowed." ::= { hmMgmtSEEErrorIDGroup 454 } hm2GenericIPAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for IP address is invalid." ::= { hmMgmtSEEErrorIDGroup 455 } hm2GenericSourcePortInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for source port is invalid." ::= { hmMgmtSEEErrorIDGroup 456 } hm2GenericRowCommitError OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the row commit process is unsuccessful." ::= { hmMgmtSEEErrorIDGroup 457 } hm2GenericDestIPAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for destination IP address is invalid." ::= { hmMgmtSEEErrorIDGroup 458 } hm2GenericDestMACAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for destination MAC address is invalid." ::= { hmMgmtSEEErrorIDGroup 459 } hm2GenericDestPortInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for destination port is invalid." ::= { hmMgmtSEEErrorIDGroup 460 } hm2GenericSourceIPAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for source IP address is invalid." ::= { hmMgmtSEEErrorIDGroup 461 } hm2GenericSourceMACAddrInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the value for source MAC address is invalid." ::= { hmMgmtSEEErrorIDGroup 462 } hm2GenericEntryInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the index value is out of range or contains invalid characters." ::= { hmMgmtSEEErrorIDGroup 463 } hm2GenericInterfaceInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the interface number is not valid." ::= { hmMgmtSEEErrorIDGroup 464 } hm2GenericOnlySupportsIPv4 OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that only IPv4 address is supported." ::= { hmMgmtSEEErrorIDGroup 465 } hm2GenericVlanIdInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the vlaue of VLAN ID is invalid and cannot be processed." ::= { hmMgmtSEEErrorIDGroup 466 } hm2GenericCommitInProgress OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the row cannot be created, modified or deleted as commit is in progress." ::= { hmMgmtSEEErrorIDGroup 467 } hm2GenericNameInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the name for the index is not valid." ::= { hmMgmtSEEErrorIDGroup 468 } hm2GenericDirectionInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the packet direction is invalid. Use 'ingress', 'egress' or 'both'." ::= { hmMgmtSEEErrorIDGroup 472 } hm2GenericNameAlreadyExist OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the entry with the same name already exists." ::= { hmMgmtSEEErrorIDGroup 473 } hm2GenericMinEntryInvalid OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the lower value cannot be greater than the upper value." ::= { hmMgmtSEEErrorIDGroup 474 } hm2GenericEntryExistInSharedTable OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the entry with the same name already exists in shared table." ::= { hmMgmtSEEErrorIDGroup 475 } hm2GenericEntryIsReadOnly OBJECT-IDENTITY STATUS current DESCRIPTION "Indicates that the field is read-only." ::= { hmMgmtSEEErrorIDGroup 476 } -- -- *********************************************************** -- hmMgmtSEInfoIDGroup -- *********************************************************** -- hmMgmtSEInfoValueChanged OBJECT-IDENTITY STATUS current DESCRIPTION "Note: Value changed from {0} to {1}" ::= { hmMgmtSEInfoIDGroup 1 } END