-- ===================================================================== -- Copyright (c) 2004-2022 New H3C Tech. Co., Ltd. All rights reserved. -- -- Description: MLAG MIB -- Reference: -- Version: V1.0 -- History: -- V1.0 Initial version, created by liuyafang -- ===================================================================== HH3C-MLAG-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB Integer32, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus FROM SNMPv2-TC InetAddressIPv4, InetAddressIPv6 FROM INET-ADDRESS-MIB PortList FROM Q-BRIDGE-MIB InterfaceIndex,ifIndex,ifDescr FROM IF-MIB; hh3cMLag MODULE-IDENTITY LAST-UPDATED "202204131707Z" ORGANIZATION "New H3C Tech. Co., Ltd." CONTACT-INFO " Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION " This MIB defines objects for Multichassis Link Aggregation Group (M-LAG). " REVISION "202204131707Z" DESCRIPTION "MLAG MIB." ::= { hh3cCommon 176 } -- -- Node definitions -- hh3cMLagObjects OBJECT IDENTIFIER ::= { hh3cMLag 1 } hh3cMLagBaseGroup OBJECT IDENTIFIER ::= { hh3cMLagObjects 1 } hh3cMLagRoleGroup OBJECT IDENTIFIER ::= { hh3cMLagObjects 2 } hh3cMLagKeepaliveGroup OBJECT IDENTIFIER ::= { hh3cMLagObjects 3 } hh3cMLagTables OBJECT IDENTIFIER ::= { hh3cMLagObjects 4 } hh3cMLagSystemMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multichassis Link Aggregation Group (M-LAG) system MAC address. The default value is six octets of zero." ::= { hh3cMLagBaseGroup 1 } hh3cMLagSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "M-LAG system priority. The default value is 32768." DEFVAL { 32768 } ::= { hh3cMLagBaseGroup 2 } hh3cMLagSystemNumber OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION " M-LAG system number." DEFVAL { 0 } ::= { hh3cMLagBaseGroup 3 } hh3cMLagRestoreDelay OBJECT-TYPE SYNTAX Integer32 (1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Data restoration interval in seconds." DEFVAL { 30 } ::= { hh3cMLagBaseGroup 4 } hh3cMLagAutoRecoveryReloadDelay OBJECT-TYPE SYNTAX Integer32 (0|240..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Reload delay timer for M-LAG system auto-recovery." DEFVAL { 0 } ::= { hh3cMLagBaseGroup 5 } hh3cMLagRoleLocalRolePriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "M-LAG role priority of the local M-LAG member device." DEFVAL { 32768 } ::= { hh3cMLagRoleGroup 1 } hh3cMLagRolePeerRolePriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "M-LAG role priority of the peer M-LAG member device." ::= { hh3cMLagRoleGroup 2 } hh3cMLagRoleLocalBridgeMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge MAC address of the local M-LAG member device. The default value is six octets of zero." ::= { hh3cMLagRoleGroup 3 } hh3cMLagRolePeerBridgeMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge MAC address of the peer M-LAG member device. If this address is unknown, the default value is six octets of zero." ::= { hh3cMLagRoleGroup 4 } hh3cMLagRoleLocalConfiguredRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "M-LAG role calculated based on the role priority and bridge MAC address of the local M-LAG member device." ::= { hh3cMLagRoleGroup 5 } hh3cMLagRolePeerConfiguredRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "M-LAG role calculated based on the role priority and bridge MAC address of the peer M-LAG member device." ::= { hh3cMLagRoleGroup 6 } hh3cMLagRoleLocalEffectiveRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current role of the local M-LAG member device." ::= { hh3cMLagRoleGroup 7 } hh3cMLagRolePeerEffectiveRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current role of the peer M-LAG member device." ::= { hh3cMLagRoleGroup 8 } hh3cMLagKeepaliveDestIpv4 OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-write STATUS current DESCRIPTION "Destination IPv4 address of the keepalive link. The default value is 0.0.0.0." ::= { hh3cMLagKeepaliveGroup 1 } hh3cMLagKeepaliveSourceIpv4 OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-write STATUS current DESCRIPTION "Source IPv4 address of the keepalive link. The default value is 0.0.0.0. This object must be used with the KeepaliveDestIpv4 object." ::= { hh3cMLagKeepaliveGroup 2 } hh3cMLagKeepaliveDestIpv6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "Destination IPv6 address of the keepalive link. The default value is 0::0." ::= { hh3cMLagKeepaliveGroup 3 } hh3cMLagKeepaliveSourceIpv6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "Source IPv6 address of the keepalive link. The default value is 0::0. This object must be used with the KeepaliveDestIpv6 object." ::= { hh3cMLagKeepaliveGroup 4 } hh3cMLagKeepaliveUdpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Keepalive destination UDP port." DEFVAL { 6400 } ::= { hh3cMLagKeepaliveGroup 5 } hh3cMLagKeepaliveInterval OBJECT-TYPE SYNTAX Integer32 (100..10000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Keepalive interval." DEFVAL { 1000 } ::= { hh3cMLagKeepaliveGroup 6 } hh3cMLagKeepaliveTimeout OBJECT-TYPE SYNTAX Integer32 (3..20) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Keepalive timeout time." DEFVAL { 5 } ::= { hh3cMLagKeepaliveGroup 7 } hh3cMLagKeepaliveHoldTime OBJECT-TYPE SYNTAX Integer32 (3..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Keepalive hold time." DEFVAL { 3 } ::= { hh3cMLagKeepaliveGroup 8 } hh3cMLagKeepaliveLinkStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Keepalive link status." ::= { hh3cMLagKeepaliveGroup 9 } hh3cMLagKeepaliveVrf OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "VPN instance name. A zero-length string represents that the local device is on the public network." ::= { hh3cMLagKeepaliveGroup 10 } hh3cMLagPeerLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMLagPeerLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The M-LAG peer-link table." ::= { hh3cMLagTables 1 } hh3cMLagPeerLinkEntry OBJECT-TYPE SYNTAX Hh3cMLagPeerLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cMLagPeerLinkTable." INDEX { hh3cMLagPeerLinkNumber } ::= { hh3cMLagPeerLinkTable 1 } Hh3cMLagPeerLinkEntry ::= SEQUENCE { hh3cMLagPeerLinkNumber Integer32, hh3cMLagPeerLinkIfIndex InterfaceIndex, hh3cMLagPeerLinkRowStatus RowStatus } hh3cMLagPeerLinkNumber OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of a peer link." ::= { hh3cMLagPeerLinkEntry 1 } hh3cMLagPeerLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index." ::= { hh3cMLagPeerLinkEntry 2 } hh3cMLagPeerLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing creation, deletion, and modification of rows. The rows support active status and destroy operations." ::= { hh3cMLagPeerLinkEntry 3 } hh3cMLagPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMLagPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The M-LAG interface table." ::= { hh3cMLagTables 2 } hh3cMLagPortEntry OBJECT-TYPE SYNTAX Hh3cMLagPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cMLagInfoTable." INDEX { hh3cMLagGroupId } ::= { hh3cMLagPortTable 1 } Hh3cMLagPortEntry ::= SEQUENCE { hh3cMLagGroupId Integer32, hh3cMLagPortIfIndex InterfaceIndex, hh3cMLagPortRowStatus RowStatus } hh3cMLagGroupId OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "M-LAG group identifier." ::= { hh3cMLagPortEntry 1 } hh3cMLagPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index of the Layer 2 aggregate interface." ::= { hh3cMLagPortEntry 2 } hh3cMLagPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing creation, deletion, and modification of rows. The rows support active status and destroy operations." ::= { hh3cMLagPortEntry 3 } hh3cMLagAllPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cMLagAllPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The M-LAG port table." ::= { hh3cMLagTables 3 } hh3cMLagAllPortEntry OBJECT-TYPE SYNTAX Hh3cMLagAllPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cMLagAllPortTable." INDEX { hh3cMLagAllPortIfIndex } ::= { hh3cMLagAllPortTable 1 } Hh3cMLagAllPortEntry ::= SEQUENCE { hh3cMLagAllPortIfIndex InterfaceIndex, hh3cMLagPortDrcpIsShortPeriod TruthValue, hh3cMLagPortPortStatus INTEGER, hh3cMLagPortLocalDRCPState OCTET STRING, hh3cMLagPortPeerDRCPState OCTET STRING, hh3cMLagPortLocalMemberList PortList, hh3cMLagPortPeerMemberList PortList } hh3cMLagAllPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { hh3cMLagAllPortEntry 1 } hh3cMLagPortDrcpIsShortPeriod OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Short Distributed Relay Control Protocol (DRCP) timeout timer flag, true or false. " ::= { hh3cMLagAllPortEntry 2 } hh3cMLagPortPortStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port status." ::= { hh3cMLagAllPortEntry 3 } hh3cMLagPortLocalDRCPState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "DRCP state flags on the local port. The flag field is one byte long,represented by ABCDEFGH from the lowest bit to the highest bit.A letter is displayed when its bit is 1 and is not displayed when its bit is 0. A-Indicates whether DRCP is enabled on the local device. 1 indicates enabled.0 indicates disabled. B-Indicates whether DRCP is enabled on the M-LAG peer device. 1 indicates enabled.0 indicates disabled. C-Indicates whether DRCP is enabled on a third M-LAG member device. 1 indicates enabled.0 indicates disabled. D-Indicates whether the local peer-link interface has determined that DRCP is enabled on the M-LAG peer device. 1 indicates yes.0 indicates no. E-Indicates the DRCP timeout timer. 1 indicates the short timeout timer. 0 indicates the long timeout timer. F-Indicates whether the local peer-link interface permits the packets that contain the negotiated gateway conversation IDs. 1 indicates yes.0 indicates no. G-Indicates whether the local peer-link interface permits the packets that contain the negotiated port conversation IDs. 1 indicates yes.0 indicates no. H-Indicates whether the local DRCPDU receive machine is in default or expired state. 1 indicates yes.0 indicates no." ::= { hh3cMLagAllPortEntry 4 } hh3cMLagPortPeerDRCPState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "DRCP state flags on the local port. The flag field is one byte long,represented by ABCDEFGH from the lowest bit to the highest bit.A letter is displayed when its bit is 1 and is not displayed when its bit is 0. A-Indicates whether DRCP is enabled on the local device. 1 indicates enabled.0 indicates disabled. B-Indicates whether DRCP is enabled on the M-LAG peer device. 1 indicates enabled.0 indicates disabled. C-Indicates whether DRCP is enabled on a third M-LAG member device. 1 indicates enabled.0 indicates disabled. D-Indicates whether the local peer-link interface has determined that DRCP is enabled on the M-LAG peer device. 1 indicates yes.0 indicates no. E-Indicates the DRCP timeout timer. 1 indicates the short timeout timer. 0 indicates the long timeout timer. F-Indicates whether the local peer-link interface permits the packets that contain the negotiated gateway conversation IDs. 1 indicates yes.0 indicates no. G-Indicates whether the local peer-link interface permits the packets that contain the negotiated port conversation IDs. 1 indicates yes.0 indicates no. H-Indicates whether the local DRCPDU receive machine is in default or expired state. 1 indicates yes.0 indicates no." ::= { hh3cMLagAllPortEntry 5 } hh3cMLagPortLocalMemberList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Local M-LAG member device's Selected aggregation member ports in an M-LAG interface or peer-link interface." ::= { hh3cMLagAllPortEntry 6 } hh3cMLagPortPeerMemberList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Peer M-LAG member device's Selected aggregation member ports in an M-LAG interface or peer-link interface." ::= { hh3cMLagAllPortEntry 7 } -- trap -- hh3cMLagTrap OBJECT IDENTIFIER ::= { hh3cMLag 2 } hh3cMLagTrapPrex OBJECT IDENTIFIER ::= { hh3cMLagTrap 0 } hh3cMLagGlobalCheckConsistency NOTIFICATION-TYPE OBJECTS { hh3cMLagConsistencyType } STATUS current DESCRIPTION "Finished global configuration consistency check. No inconsistency exists." ::= { hh3cMLagTrapPrex 1 } hh3cMLagGlobalCheckInConsistency NOTIFICATION-TYPE OBJECTS { hh3cMLagConsistencyType } STATUS current DESCRIPTION "Finished global configuration consistency check. Inconsistency exists." ::= { hh3cMLagTrapPrex 2 } hh3cMLagIfCheckConsistency NOTIFICATION-TYPE OBJECTS { hh3cMLagConsistencyType, ifIndex, ifDescr } STATUS current DESCRIPTION "Finished M-LAG interface configuration consistency check. No inconsistency exists." ::= { hh3cMLagTrapPrex 3 } hh3cMLagIfCheckInConsistency NOTIFICATION-TYPE OBJECTS { hh3cMLagConsistencyType, ifIndex, ifDescr } STATUS current DESCRIPTION "Finished M-LAG interface configuration consistency check. Inconsistency exists." ::= { hh3cMLagTrapPrex 4 } hh3cMLagPortGlobalDown NOTIFICATION-TYPE OBJECTS { hh3cMLagGroupIdForNotify } STATUS current DESCRIPTION "The state of the M-LAG group changed to global down." ::= { hh3cMLagTrapPrex 5 } hh3cMLagPortGlobalUp NOTIFICATION-TYPE OBJECTS { hh3cMLagGroupIdForNotify } STATUS current DESCRIPTION "The state of the M-LAG group changed to global up." ::= { hh3cMLagTrapPrex 6 } hh3cMLagPortSelected NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cMLagGroupIdForNotify } STATUS current DESCRIPTION "The local M-LAG interface has selected member ports." ::= { hh3cMLagTrapPrex 7 } hh3cMLagPortNoSelected NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cMLagGroupIdForNotify, hh3cMLagPortNotSelectedReason } STATUS current DESCRIPTION "The local M-LAG interface does not have selected member ports." ::= { hh3cMLagTrapPrex 8 } hh3cMLagPortPeerNoSelected NOTIFICATION-TYPE OBJECTS { hh3cMLagGroupIdForNotify } STATUS current DESCRIPTION "The peer M-LAG interface does not have selected member ports." ::= { hh3cMLagTrapPrex 9 } hh3cMLagPortPeerSelected NOTIFICATION-TYPE OBJECTS { hh3cMLagGroupIdForNotify } STATUS current DESCRIPTION "The peer M-LAG interface has selected member ports." ::= { hh3cMLagTrapPrex 10 } hh3cMLagPeerLinkUp NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "The peer link came up." ::= { hh3cMLagTrapPrex 11 } hh3cMLagPeerLinkDown NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "The peer link went down." ::= { hh3cMLagTrapPrex 12 } hh3cMLagKeepaliveDown NOTIFICATION-TYPE OBJECTS { hh3cMLagKeepAliveDownReason } STATUS current DESCRIPTION "The keepalive link went down." ::= { hh3cMLagTrapPrex 13 } hh3cMLagKeepaliveUp NOTIFICATION-TYPE STATUS current DESCRIPTION "The keepalive link came up." ::= { hh3cMLagTrapPrex 14 } hh3cMLagDeviceMadDown NOTIFICATION-TYPE OBJECTS { hh3cMLagMadDownReason } STATUS current DESCRIPTION "The device changed to M-LAG MAD DOWN state." ::= { hh3cMLagTrapPrex 15 } hh3cMLagDeviceMadRecovery NOTIFICATION-TYPE STATUS current DESCRIPTION "The device recovered from M-LAG MAD DOWN state." ::= { hh3cMLagTrapPrex 16 } hh3cMLagDeviceRoleChange NOTIFICATION-TYPE OBJECTS { hh3cMLagOldRole, hh3cMLagNewRole, hh3cMLagRoleChangeReason } STATUS current DESCRIPTION "The device role has changed." ::= { hh3cMLagTrapPrex 17 } hh3cMLagTrapOjbects OBJECT IDENTIFIER ::= { hh3cMLagTrap 1 } hh3cMLagConsistencyType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The consistency check type. type1: Type 1 configuration consistency check. type2: Type 2 configuration consistency check." ::= { hh3cMLagTrapOjbects 1 } hh3cMLagGroupIdForNotify OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "M-LAG group identifier." ::= { hh3cMLagTrapOjbects 2 } hh3cMLagPortNotSelectedReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The M-LAG interface unselected reason." ::= { hh3cMLagTrapOjbects 3 } hh3cMLagKeepAliveDownReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The keepalive link down reason." ::= { hh3cMLagTrapOjbects 4 } hh3cMLagMadDownReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The M-LAG MAD DOWN reason." ::= { hh3cMLagTrapOjbects 5 } hh3cMLagOldRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Old role of the local M-LAG member device." ::= { hh3cMLagTrapOjbects 6 } hh3cMLagNewRole OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "New role of the local M-LAG member device." ::= { hh3cMLagTrapOjbects 7 } hh3cMLagRoleChangeReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The M-LAG role change reason." ::= { hh3cMLagTrapOjbects 8 } END -- -- hh3c-mlag.mib --