-- =========================================================== -- Copyright (C) 2007 by H3C TECHNOLOGIES. All rights reserved. -- Description: The MIB is designed to manage the snap of storage device. -- Reference: -- Version: V1.0 -- History: -- V1.0 2007-09-14 created by yangqi -- ================================================================= H3C-STORAGE-SNAP-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, DateAndTime, RowStatus FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB entPhysicalIndex FROM ENTITY-MIB H3cStorageOnlineState, H3cStorageEnableState, H3cStorageActionType, H3cLvIDType, H3cRaidIDType, H3cExtendSelectPolicy, h3cStorageRef FROM H3C-STORAGE-REF-MIB; h3cStorageSnap MODULE-IDENTITY LAST-UPDATED "200709141452Z" ORGANIZATION "H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085" DESCRIPTION "This MIB describes the general information about snap of storage device." ::= { h3cStorageRef 2 } h3cSnapMibObjects OBJECT IDENTIFIER ::= { h3cStorageSnap 1 } h3cGlobalSnapSettingsObject OBJECT IDENTIFIER ::= { h3cSnapMibObjects 1 } h3cAddtionalSpaceMaxSize OBJECT-TYPE SYNTAX Integer32 UNITS "TB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource ." ::= { h3cGlobalSnapSettingsObject 1 } -- Snap Resource Config Table -- This table described how to config a snap on a special logic volume. h3cSnapConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cSnapConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the snapshot resources for special logic volumes." ::= { h3cSnapMibObjects 2 } h3cSnapConfigEntry OBJECT-TYPE SYNTAX H3cSnapConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing configuration about the snapshot resource." INDEX { h3cSnapLvIndex } ::= { h3cSnapConfigTable 1 } H3cSnapConfigEntry ::= SEQUENCE { h3cSnapLvIndex H3cLvIDType, h3cSnapAreaId H3cLvIDType, h3cSnapAreaAutoExpand H3cStorageEnableState, h3cSnapAreaThreshold Integer32, h3cSnapAreaIncSize Integer32, h3cSnapAreaMaxSize Integer32, h3cSnapAreaFullDeleteTM INTEGER, h3cSnapAreaNotify H3cStorageEnableState, h3cSnapAreaStatus H3cStorageOnlineState, h3cSnapRaidUuid H3cRaidIDType, h3cSnapRaidSize Integer32, h3cSnapRaidSelectPolicy H3cExtendSelectPolicy, h3cSnapAreaTotalSize Integer32, h3cSnapAreaFreeSize Integer32, h3cSnapExtendTimes Integer32, h3cSnapRowStatus RowStatus } h3cSnapLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the index of h3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of h3cLvIndex." ::= { h3cSnapConfigEntry 1 } h3cSnapAreaId OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the snapshot resource of the logic volume." ::= { h3cSnapConfigEntry 2 } h3cSnapAreaAutoExpand OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes if the space of snapshot resource can be expanded automatically." DEFVAL { disable } ::= { h3cSnapConfigEntry 3 } h3cSnapAreaThreshold OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaThreshold' means the threshold of the snapshot resource." ::= { h3cSnapConfigEntry 4 } h3cSnapAreaIncSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the amount of space to be allocated for each expansion." ::= { h3cSnapConfigEntry 5 } h3cSnapAreaMaxSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the max size of snapshot resource." ::= { h3cSnapConfigEntry 6 } h3cSnapAreaFullDeleteTM OBJECT-TYPE SYNTAX INTEGER { rotative(1), none(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not." DEFVAL { none } ::= { h3cSnapConfigEntry 7 } h3cSnapAreaNotify OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes if a snapshot notification should be send to the client when the system create a timemark." ::= { h3cSnapConfigEntry 8 } h3cSnapAreaStatus OBJECT-TYPE SYNTAX H3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the state of the snapshot resource." ::= { h3cSnapConfigEntry 9 } h3cSnapRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the raid where the snapshot resource is created." ::= { h3cSnapConfigEntry 10 } h3cSnapRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the size designated when the snapshot resource is created." ::= { h3cSnapConfigEntry 11 } h3cSnapRaidSelectPolicy OBJECT-TYPE SYNTAX H3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated h3cSnapRaidUuid object is equal to null." DEFVAL { none } ::= { h3cSnapConfigEntry 12 } h3cSnapAreaTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current total size of the snapshot resource." ::= { h3cSnapConfigEntry 13 } h3cSnapAreaFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the snapshot resource." ::= { h3cSnapConfigEntry 14 } h3cSnapExtendTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the times the snapshot resource extended." ::= { h3cSnapConfigEntry 15 } h3cSnapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled." ::= { h3cSnapConfigEntry 16 } -- Snap Resource Expand Table -- This table described how to expand a snapshot resource. h3cSnapExpandTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cSnapExpandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to expand a snapshot resource." ::= { h3cSnapMibObjects 3 } h3cSnapExpandEntry OBJECT-TYPE SYNTAX H3cSnapExpandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing expand information applicable to the snapshot resource." INDEX { h3cSnapLvIndex, h3cSAExpRaidUuid } ::= { h3cSnapExpandTable 1 } H3cSnapExpandEntry ::= SEQUENCE { h3cSAExpRaidUuid H3cRaidIDType, h3cSAExpSize Integer32, h3cSAExpRaidSize Integer32, h3cSnapAreaExpRowStatus RowStatus } h3cSAExpRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cRaidUuid in H3C-RAID-MIB." ::= { h3cSnapExpandEntry 1 } h3cSAExpSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read." ::= { h3cSnapExpandEntry 2 } h3cSAExpRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read." ::= { h3cSnapExpandEntry 3 } h3cSnapAreaExpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the actions to expand the size for snap." ::= { h3cSnapExpandEntry 4 } -- Snap Resource Copy Table -- This table described how to take a snapshot copy. h3cSnapCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cSnapCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity about snapshot copy." ::= { h3cSnapMibObjects 4 } h3cSnapCopyEntry OBJECT-TYPE SYNTAX H3cSnapCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing snapshot copy information applicable." INDEX { h3cSnapLvIndex } ::= { h3cSnapCopyTable 1 } H3cSnapCopyEntry ::= SEQUENCE { h3cSnapCopyLvIndex H3cLvIDType, h3cSnapCopyPercentage Integer32, h3cSnapCopyStartTime DateAndTime, h3cSnapCopySwitch INTEGER } h3cSnapCopyLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the index of destination logic volume for snapshot copy." ::= { h3cSnapCopyEntry 1 } h3cSnapCopyPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'." ::= { h3cSnapCopyEntry 2 } h3cSnapCopyStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the snapshot copy." ::= { h3cSnapCopyEntry 3 } h3cSnapCopySwitch OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent." ::= { h3cSnapCopyEntry 4 } -- TimeMark Resource Config Table -- This table described how to config a TimeMark resource on a special logic -- volume. h3cTimeMarkConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTimeMarkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config a TimeMark on a special logic volume." ::= { h3cSnapMibObjects 5 } h3cTimeMarkConfigEntry OBJECT-TYPE SYNTAX H3cTimeMarkConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeMark." INDEX { h3cSnapLvIndex } ::= { h3cTimeMarkConfigTable 1 } H3cTimeMarkConfigEntry ::= SEQUENCE { h3cTimeMarkCounts Integer32, h3cTimeMarkInitializeTime DateAndTime, h3cTimeMarkInterval Integer32, h3cTimeMarkLastTime DateAndTime, h3cTimeMarkTotal Integer32, h3cTimeMarkSwitch H3cStorageEnableState } h3cTimeMarkCounts OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the max num of TimeMark which can be configed." ::= { h3cTimeMarkConfigEntry 1 } h3cTimeMarkInitializeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the date and time when the first TimeMark is created on the logic volume." ::= { h3cTimeMarkConfigEntry 2 } h3cTimeMarkInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds." ::= { h3cTimeMarkConfigEntry 3 } h3cTimeMarkLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the date and time when the latest TimeMark is created on the logic volume." ::= { h3cTimeMarkConfigEntry 4 } h3cTimeMarkTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current num of TimeMark." ::= { h3cTimeMarkConfigEntry 5 } h3cTimeMarkSwitch OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes enable or disable TimeMark." ::= { h3cTimeMarkConfigEntry 6 } -- TimeMark Resource Create Table -- This table described how to create a TimeMark on a special logic -- volume. h3cTimeMarkCreateTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTimeMarkCreateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to create a TimeMark on a special logic volume." ::= { h3cSnapMibObjects 6 } h3cTimeMarkCreateEntry OBJECT-TYPE SYNTAX H3cTimeMarkCreateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing create information applicable to the TimeMark." INDEX { h3cSnapLvIndex, h3cTimeMarkStamp } ::= { h3cTimeMarkCreateTable 1 } H3cTimeMarkCreateEntry ::= SEQUENCE { h3cTimeMarkStamp DateAndTime, h3cTimeMarkComment OCTET STRING, h3cTimeMarkSize Integer32, h3cTimeMarkRowStatus RowStatus } h3cTimeMarkStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the date and time the TimeMark is created." ::= { h3cTimeMarkCreateEntry 1 } h3cTimeMarkComment OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the comment of the TimeMark." ::= { h3cTimeMarkCreateEntry 2 } h3cTimeMarkSize OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the current size of the TimeMark." ::= { h3cTimeMarkCreateEntry 3 } h3cTimeMarkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using." ::= { h3cTimeMarkCreateEntry 4 } -- TimeMark Copy Table -- This table described how to do a TimeMark copy. h3cTimeMarkCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTimeMarkCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity about a TimeMark copy." ::= { h3cSnapMibObjects 7 } h3cTimeMarkCopyEntry OBJECT-TYPE SYNTAX H3cTimeMarkCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeMark copy." INDEX { h3cSnapLvIndex, h3cTimeMarkStamp } ::= { h3cTimeMarkCopyTable 1 } H3cTimeMarkCopyEntry ::= SEQUENCE { h3cTMCopyDestLvId H3cLvIDType, h3cTMCopyPercentage Integer32, h3cTMCopyStartTime DateAndTime, h3cTMCopySwitch INTEGER } h3cTMCopyDestLvId OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the index of destination logic volume for TimeMark copy." ::= { h3cTimeMarkCopyEntry 1 } h3cTMCopyPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'." ::= { h3cTimeMarkCopyEntry 2 } h3cTMCopyStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the TimeMark copy." ::= { h3cTimeMarkCopyEntry 3 } h3cTMCopySwitch OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get." ::= { h3cTimeMarkCopyEntry 4 } -- TimeMark Rollback Table -- This table described how to use a TimeMark to rollback the logic volume. h3cTimeMarkRollbackTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTimeMarkRollbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to use a TimeMark to rollback the logic volume." ::= { h3cSnapMibObjects 8 } h3cTimeMarkRollbackEntry OBJECT-TYPE SYNTAX H3cTimeMarkRollbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to use a TimeMark to rollback the logic volume." INDEX { h3cSnapLvIndex, h3cTimeMarkStamp } ::= { h3cTimeMarkRollbackTable 1 } H3cTimeMarkRollbackEntry ::= SEQUENCE { h3cTMRollbackPercentage Integer32, h3cTMRollbackStartTime DateAndTime, h3cTMRollbackSwitch H3cStorageActionType } h3cTMRollbackPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of rollback." ::= { h3cTimeMarkRollbackEntry 1 } h3cTMRollbackStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the time to start the rollback." ::= { h3cTimeMarkRollbackEntry 2 } h3cTMRollbackSwitch OBJECT-TYPE SYNTAX H3cStorageActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted." ::= { h3cTimeMarkRollbackEntry 3 } -- Time View Table -- This table described how to config TimeView on a special TimeMark -- mark. h3cTimeViewTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cTimeViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config a TimeView on a special TimeMark." ::= { h3cSnapMibObjects 9 } h3cTimeViewEntry OBJECT-TYPE SYNTAX H3cTimeViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the TimeView." INDEX { h3cSnapLvIndex, h3cTimeViewStamp } ::= { h3cTimeViewTable 1 } H3cTimeViewEntry ::= SEQUENCE { h3cTimeViewStamp DateAndTime, h3cTimeViewID H3cLvIDType, h3cTimeViewName OCTET STRING, h3cTimeViewRowStatus RowStatus } h3cTimeViewStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of h3cTimeMarkStamp." ::= { h3cTimeViewEntry 1 } h3cTimeViewID OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the TimeView. " ::= { h3cTimeViewEntry 2 } h3cTimeViewName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the name of the TimeView." ::= { h3cTimeViewEntry 3 } h3cTimeViewRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the actions to create or delete the TimeView." ::= { h3cTimeViewEntry 4 } -- Logic Volume Replica Config Table -- This table described how to config logic volume replica. h3cReplicaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cReplicaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config replication for a logic volume." ::= { h3cSnapMibObjects 10 } h3cReplicaConfigEntry OBJECT-TYPE SYNTAX H3cReplicaConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing config information applicable to the replication for a logic volume." INDEX { h3cRepLocalLvIndex } ::= { h3cReplicaConfigTable 1 } H3cReplicaConfigEntry ::= SEQUENCE { h3cRepLocalLvIndex H3cLvIDType, h3cLvRepLocalWay INTEGER, h3cRepLocalServerIP InetAddress, h3cRepLocalServerIPType InetAddressType, h3cRepLocalServerName OCTET STRING, h3cRepLocalServerUsername OCTET STRING, h3cRepLocalServerPassword OCTET STRING, h3cRepRemoteServerIP InetAddress, h3cRepRemoteServerIPType InetAddressType, h3cRepRemoteServerName OCTET STRING, h3cRepRemoteServerUsername OCTET STRING, h3cRepRemoteServerPassword OCTET STRING, h3cRepRemoteLvIndex H3cLvIDType, h3cReplicaMode INTEGER, h3cReplicaWatermark Integer32, h3cReplicaWatermarkRetry Integer32, h3cReplicaInitializeTime DateAndTime, h3cReplicaInterval Integer32, h3cReplicaEncrypt H3cStorageEnableState, h3cReplicaCompress H3cStorageEnableState, h3cReplicaUseExistTM H3cStorageEnableState, h3cReplicaProtocol INTEGER, h3cReplicaScanDiff TruthValue, h3cReplicaStatSwitch INTEGER, h3cReplicaRowStatus RowStatus } h3cRepLocalLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of h3cSnapLvIndex." ::= { h3cReplicaConfigEntry 1 } h3cLvRepLocalWay OBJECT-TYPE SYNTAX INTEGER { outgoing(1), incoming(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of 'outgoing' means the h3cRepLocalLvIndex is the primary logic volume of replication, and the h3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the h3cRepLocalLvIndex is the replica logic volume of replication. , and the h3cRepRemoteLvIndex is the primary logic volume." ::= { h3cReplicaConfigEntry 2 } h3cRepLocalServerIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address of local server." ::= { h3cReplicaConfigEntry 3 } h3cRepLocalServerIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address type of local server." ::= { h3cReplicaConfigEntry 4 } h3cRepLocalServerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the name of local server." ::= { h3cReplicaConfigEntry 5 } h3cRepLocalServerUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the username of local server." ::= { h3cReplicaConfigEntry 6 } h3cRepLocalServerPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the password of local server." ::= { h3cReplicaConfigEntry 7 } h3cRepRemoteServerIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address of remote server." ::= { h3cReplicaConfigEntry 8 } h3cRepRemoteServerIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the ip address type of remote server." ::= { h3cReplicaConfigEntry 9 } h3cRepRemoteServerName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the name of remote server." ::= { h3cReplicaConfigEntry 10 } h3cRepRemoteServerUsername OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the username of remote server." ::= { h3cReplicaConfigEntry 11 } h3cRepRemoteServerPassword OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the password of remote server." ::= { h3cReplicaConfigEntry 12 } h3cRepRemoteLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the logic volume of remote server." ::= { h3cReplicaConfigEntry 13 } h3cReplicaMode OBJECT-TYPE SYNTAX INTEGER { adaptive(1), remote(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'." ::= { h3cReplicaConfigEntry 14 } h3cReplicaWatermark OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size of watermark which means a replication is scheduled." ::= { h3cReplicaConfigEntry 15 } h3cReplicaWatermarkRetry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "If the 'h3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute." ::= { h3cReplicaConfigEntry 16 } h3cReplicaInitializeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the time to start an initial replication." ::= { h3cReplicaConfigEntry 17 } h3cReplicaInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies how often the replication should be repeated after initial replication. The units is minute." ::= { h3cReplicaConfigEntry 18 } h3cReplicaEncrypt OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the encrypt option is enable or diable." DEFVAL { disable } ::= { h3cReplicaConfigEntry 19 } h3cReplicaCompress OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the compress option is enable or diable." DEFVAL { disable } ::= { h3cReplicaConfigEntry 20 } h3cReplicaUseExistTM OBJECT-TYPE SYNTAX H3cStorageEnableState MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies if using the exist TimeMark to replicate or not." DEFVAL { disable } ::= { h3cReplicaConfigEntry 21 } h3cReplicaProtocol OBJECT-TYPE SYNTAX INTEGER { tcp(1), rudp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol." ::= { h3cReplicaConfigEntry 22 } h3cReplicaScanDiff OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized." ::= { h3cReplicaConfigEntry 23 } h3cReplicaStatSwitch OBJECT-TYPE SYNTAX INTEGER { promte(1), sync(2), scan(3), reversal(4), stop(5), suspend(6), resume(7), none(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource." ::= { h3cReplicaConfigEntry 24 } h3cReplicaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to enable or disable the replication." ::= { h3cReplicaConfigEntry 25 } -- Logic Volume Replication State Table -- This table described the replication state. h3cReplicaStateTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cReplicaStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to show replication state." ::= { h3cSnapMibObjects 11 } h3cReplicaStateEntry OBJECT-TYPE SYNTAX H3cReplicaStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing show information applicable to the replication state." INDEX { h3cRepLocalLvIndex } ::= { h3cReplicaStateTable 1 } H3cReplicaStateEntry ::= SEQUENCE { h3cReplicaDelta Integer32, h3cReplicaLastSyncTime DateAndTime, h3cReplicaNextSyncTime DateAndTime, h3cReplicaSyncTotalSize Integer32, h3cReplicaSyncCurPercentage Integer32, h3cReplicaSyncPerformance Integer32, h3cReplicaRunStatus INTEGER } h3cReplicaDelta OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the size of delta data after last sync." ::= { h3cReplicaStateEntry 1 } h3cReplicaLastSyncTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the date and time when last sync is taken." ::= { h3cReplicaStateEntry 2 } h3cReplicaNextSyncTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the date and time when next sync will be taken." ::= { h3cReplicaStateEntry 3 } h3cReplicaSyncTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies how much data need to be synchronized to the replica resource for current replication." ::= { h3cReplicaStateEntry 4 } h3cReplicaSyncCurPercentage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies how much data has been synchronized to the replica resource for current replication." ::= { h3cReplicaStateEntry 5 } h3cReplicaSyncPerformance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the performance of the synchronize. The unit is MB/s." ::= { h3cReplicaStateEntry 6 } h3cReplicaRunStatus OBJECT-TYPE SYNTAX INTEGER { suspend(1), idle(2), stop(3), sync(4), scan(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the replica." ::= { h3cReplicaStateEntry 7 } -- Continued replication Resource Config Table -- This table described how to config Continuous Replication Resource for a adaptive replication. h3cCDRConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCDRConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config Continuous Replication Resource." ::= { h3cSnapMibObjects 12 } h3cCDRConfigEntry OBJECT-TYPE SYNTAX H3cCDRConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to Continuous Replication Resource of the logic volume." INDEX { h3cCDRLvIndex } ::= { h3cCDRConfigTable 1 } H3cCDRConfigEntry ::= SEQUENCE { h3cCDRLvIndex H3cLvIDType, h3cCDRID Integer32, h3cCDRStatus H3cStorageOnlineState, h3cCDRTotalSize Integer32, h3cCDRFreeSize Integer32, h3cCDRSelectPolicy H3cExtendSelectPolicy, h3cCDRRowStatus RowStatus } h3cCDRLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of h3cRepLocalLvIndex. Note that an entry of h3cCDRConfigTable can be created only when the associated h3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cCDRDistributeTable objects should be deleted automatically." ::= { h3cCDRConfigEntry 1 } h3cCDRID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Continuous Replication Resource." ::= { h3cCDRConfigEntry 2 } h3cCDRStatus OBJECT-TYPE SYNTAX H3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the Continuous Replication Resource." ::= { h3cCDRConfigEntry 3 } h3cCDRTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the total size of the Continuous Replication Resource." ::= { h3cCDRConfigEntry 4 } h3cCDRFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the Continuous Replication Resource." ::= { h3cCDRConfigEntry 5 } h3cCDRSelectPolicy OBJECT-TYPE SYNTAX H3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for Continuous Replication Resource." DEFVAL { none } ::= { h3cCDRConfigEntry 6 } h3cCDRRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the Continuous Replication Resource." ::= { h3cCDRConfigEntry 7 } -- Continuous Replication Resource Distributing Table -- This table described how to config the distribution of Continuous Replication Resource. h3cCDRDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCDRDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the distribution of Continuous Replication Resource." ::= { h3cSnapMibObjects 13 } h3cCDRDistributeEntry OBJECT-TYPE SYNTAX H3cCDRDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to the distribution of Continuous Replication Resource." INDEX { h3cCDRDistLvIndex, h3cCDRRaidUuid } ::= { h3cCDRDistributeTable 1 } H3cCDRDistributeEntry ::= SEQUENCE { h3cCDRDistLvIndex H3cLvIDType, h3cCDRRaidUuid H3cRaidIDType, h3cCDRRaidSize Integer32, h3cCDRExtRowStatus RowStatus } h3cCDRDistLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB." ::= { h3cCDRDistributeEntry 1 } h3cCDRRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cRaidUuid in H3C-RAID-MIB." ::= { h3cCDRDistributeEntry 2 } h3cCDRRaidSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the Continuous Replication Resource." ::= { h3cCDRDistributeEntry 3 } h3cCDRExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create the distribution for the Continuous Replication Resource." ::= { h3cCDRDistributeEntry 4 } -- SafeCache Config Table -- This table described how to config SafeCache of logic volume. h3cSafeCacheConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cSafeCacheConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config SafeCache." ::= { h3cSnapMibObjects 14 } h3cSafeCacheConfigEntry OBJECT-TYPE SYNTAX H3cSafeCacheConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to SafeCache of the logic volume." INDEX { h3cSafeCacheLvIndex } ::= { h3cSafeCacheConfigTable 1 } H3cSafeCacheConfigEntry ::= SEQUENCE { h3cSafeCacheLvIndex H3cLvIDType, h3cSafeCacheID Integer32, h3cSafeCacheStatus H3cStorageOnlineState, h3cSafeCacheTotalSize Integer32, h3cSafeCacheFreeSize Integer32, h3cSafeCacheSelectPolicy H3cExtendSelectPolicy, h3cSafeCacheThreshold Integer32, h3cSafeCacheFlushTime Integer32, h3cSafeCacheFlushCommand Integer32, h3cSafeCacheSkipDupWrite INTEGER, h3cSafeCacheRunStatus INTEGER, h3cSafeCacheSwitch INTEGER, h3cSafeCacheRowStatus RowStatus } h3cSafeCacheLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cSafeCacheConfigTable can be created only when the associated h3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cSafeCacheDistributeTable objects should be deleted automatically." ::= { h3cSafeCacheConfigEntry 1 } h3cSafeCacheID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies a SafeCache." ::= { h3cSafeCacheConfigEntry 2 } h3cSafeCacheStatus OBJECT-TYPE SYNTAX H3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the SafeCache." ::= { h3cSafeCacheConfigEntry 3 } h3cSafeCacheTotalSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the total size of the SafeCache. The units is million bytes." ::= { h3cSafeCacheConfigEntry 4 } h3cSafeCacheFreeSize OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the free size of the SafeCache. The units is million bytes." ::= { h3cSafeCacheConfigEntry 5 } h3cSafeCacheSelectPolicy OBJECT-TYPE SYNTAX H3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for SafeCache." DEFVAL { none } ::= { h3cSafeCacheConfigEntry 6 } h3cSafeCacheThreshold OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the maximal percentage of date changed before data flushing." ::= { h3cSafeCacheConfigEntry 7 } h3cSafeCacheFlushTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the period during which the date can stay in cache before data flushing. The units is second." ::= { h3cSafeCacheConfigEntry 8 } h3cSafeCacheFlushCommand OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the number of commands when data flushing." ::= { h3cSafeCacheConfigEntry 9 } h3cSafeCacheSkipDupWrite OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies skip duplicate write commands or not." ::= { h3cSafeCacheConfigEntry 10 } h3cSafeCacheRunStatus OBJECT-TYPE SYNTAX INTEGER { run(1), suspend(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the run state of the SafeCache." ::= { h3cSafeCacheConfigEntry 11 } h3cSafeCacheSwitch OBJECT-TYPE SYNTAX INTEGER { suspend(1), resume(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache." ::= { h3cSafeCacheConfigEntry 12 } h3cSafeCacheRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the SafeCache." ::= { h3cSafeCacheConfigEntry 13 } -- SafeCache Resource Distributing Table -- This table described how to config SafeCache resource of logic volume. h3cSafeCacheDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cSafeCacheDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the SafeCache resource." ::= { h3cSnapMibObjects 15 } h3cSafeCacheDistributeEntry OBJECT-TYPE SYNTAX H3cSafeCacheDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to SafeCache resource of the logic volume." INDEX { h3cSafeCacheDistLvIndex, h3cSafeCacheRaidUuid } ::= { h3cSafeCacheDistributeTable 1 } H3cSafeCacheDistributeEntry ::= SEQUENCE { h3cSafeCacheDistLvIndex H3cLvIDType, h3cSafeCacheRaidUuid H3cRaidIDType, h3cSafeCacheRaidSize Integer32, h3cSafeCacheExtRowStatus RowStatus } h3cSafeCacheDistLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB." ::= { h3cSafeCacheDistributeEntry 1 } h3cSafeCacheRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cRaidUuid in H3C-RAID-MIB." ::= { h3cSafeCacheDistributeEntry 2 } h3cSafeCacheRaidSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the SafeCache resource." ::= { h3cSafeCacheDistributeEntry 3 } h3cSafeCacheExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create the distribution for the SafeCache resource." ::= { h3cSafeCacheDistributeEntry 4 } -- Logic Volume Mirror Config Table -- This table described how to config mirror for a logic volume. h3cMirrorConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cMirrorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config mirror." ::= { h3cSnapMibObjects 16 } h3cMirrorConfigEntry OBJECT-TYPE SYNTAX H3cMirrorConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to mirror for the logic volume." INDEX { h3cMirrorLvIndex } ::= { h3cMirrorConfigTable 1 } H3cMirrorConfigEntry ::= SEQUENCE { h3cMirrorLvIndex H3cLvIDType, h3cMirrorType INTEGER, h3cMirrorStatus H3cStorageOnlineState, h3cMirrorName OCTET STRING, h3cMirrorSyncPercentage Integer32, h3cMirrorSyncPerformance Integer32, h3cMirrorDelta Integer32, h3cMirrorRaidType INTEGER, h3cMirrorSelectPolicy H3cExtendSelectPolicy, h3cMirrorSwitch INTEGER, h3cMirrorExtendRaidUuid H3cRaidIDType, h3cMirrorRowStatus RowStatus } h3cMirrorLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cMirrorConfigTable can be created only when the associated h3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cMirrorDistributeTable objects should be deleted automatically." ::= { h3cMirrorConfigEntry 1 } h3cMirrorType OBJECT-TYPE SYNTAX INTEGER { sync(1), async(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the type of the mirror." ::= { h3cMirrorConfigEntry 2 } h3cMirrorStatus OBJECT-TYPE SYNTAX H3cStorageOnlineState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the state of the mirror resource." ::= { h3cMirrorConfigEntry 3 } h3cMirrorName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the name of the mirror resource. it is used when promote mirror resource." ::= { h3cMirrorConfigEntry 4 } h3cMirrorSyncPercentage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the percentage of the mirror sync." ::= { h3cMirrorConfigEntry 5 } h3cMirrorSyncPerformance OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the performance of the mirror sync. The unit is MB/S" ::= { h3cMirrorConfigEntry 6 } h3cMirrorDelta OBJECT-TYPE SYNTAX Integer32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies size of delta data after the last mirror sync." ::= { h3cMirrorConfigEntry 7 } h3cMirrorRaidType OBJECT-TYPE SYNTAX INTEGER { virtual(1), serviceEnable(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the raid type of the mirror resource." ::= { h3cMirrorConfigEntry 8 } h3cMirrorSelectPolicy OBJECT-TYPE SYNTAX H3cExtendSelectPolicy MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the policy about allocating the space for mirror resource." DEFVAL { none } ::= { h3cMirrorConfigEntry 9 } h3cMirrorSwitch OBJECT-TYPE SYNTAX INTEGER { sync(1), swap(2), promote(3), none(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically." ::= { h3cMirrorConfigEntry 10 } h3cMirrorExtendRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the raid of the mirror resource when the primary logic volume resource is extended." ::= { h3cMirrorConfigEntry 11 } h3cMirrorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the mirror resource." ::= { h3cMirrorConfigEntry 12 } -- Logic Volume Mirror Resource Distributing Table -- This table described how to config mirror resource for logic volume. h3cMirrorDistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cMirrorDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains some entity to config the mirror resource." ::= { h3cSnapMibObjects 17 } h3cMirrorDistributeEntry OBJECT-TYPE SYNTAX H3cMirrorDistributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing some information applicable to mirror resource for the logic volume." INDEX { h3cMirrorDistLvIndex, h3cMirrorRaidUuid } ::= { h3cMirrorDistributeTable 1 } H3cMirrorDistributeEntry ::= SEQUENCE { h3cMirrorDistLvIndex H3cLvIDType, h3cMirrorRaidUuid H3cRaidIDType, h3cMirrorRaidSize Integer32, h3cMirrorExtRowStatus RowStatus } h3cMirrorDistLvIndex OBJECT-TYPE SYNTAX H3cLvIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB." ::= { h3cMirrorDistributeEntry 1 } h3cMirrorRaidUuid OBJECT-TYPE SYNTAX H3cRaidIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is identical to h3cRaidUuid in H3C-RAID-MIB." ::= { h3cMirrorDistributeEntry 2 } h3cMirrorRaidSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the size on the special raid distributed for the mirror resource." ::= { h3cMirrorDistributeEntry 3 } h3cMirrorExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the action to create or delete the distribution for the mirror resource." ::= { h3cMirrorDistributeEntry 4 } END