-- ===========================================================================================================
-- Copyright (c) 2004-2018 Hangzhou H3C Tech. Co., Ltd.  All rights reserved.
--
-- Description: ISSU MIB
-- Reference:
-- Version: V1.2
-- History:
--  Revision 1.0 2012-12-20 created by Wang Feng
--               2013-4-20 modified by Zhu Liuxing
--  Revision 1.1 2014-01-10 change h3cIssuUpgradeImageIndex and
--               h3cIssuUpgradeImageURL range by z03030
--  Revision 1.2 2018-04-08 change h3cIssuUpgradeImageType by l07660
-- ============================================================================================================

H3C-ISSU-MIB DEFINITIONS ::= BEGIN

IMPORTS
    h3cCommon
        FROM HUAWEI-3COM-OID-MIB
    Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    DisplayString, RowStatus, TruthValue
        FROM SNMPv2-TC;

h3cIssuUpgrade MODULE-IDENTITY
    LAST-UPDATED "201301151536Z"        -- January 15, 2013 at 15:36 GMT
    ORGANIZATION
        "Hangzhou H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team Hangzhou H3C Tech. Co., Ltd.
        Haidian District Beijing P.R. China
        http://www.h3c.com
        Zip:_100085"
    DESCRIPTION
        "This MIB provides objects for upgrading images on modules in the
        system, objects for showing the result of an upgrade operation,
        and objects for showing the result of a test operation.

        To perform an upgrade operation, a management application
        must first read the h3cIssuUpgradeImageTable table and use the
        information in other tables, as explained below.  You can
        configure a new image name for each image type as listed in
        h3cIssuUpgradeImageTable.  The system will use this image on the
        particular module at the next reboot.

        The management application used to perform an upgrade
        operation must first check if an upgrade operation is already
        in progress in the system.  This is done by reading the
        h3cIssuOpType ('none' indicates that
        no other upgrade operation is in progress.  Any other value
        indicates that an upgrade is already in progress and a new upgrade
        operation is not allowed.  To start an 'install' operation,
        the user must first perform a 'test' operation to examine the
        version compatibility between the given set of images
        and the running images.  Only if the result of the 'test'
        operation is 'success' can the user proceed to do an install
        operation.  The table h3cIssuTestResultTable
        provides the result of the 'test' operation performed by using h3cIssuOpType.
        The table h3cIssuUpgradeResultTable provides the result of the 'install' operation
        performed by using h3cIssuOpType.
        "
    REVISION "201301151536Z"        -- January 15, 2013 at 15:36 GMT
    DESCRIPTION
        "Initial version of this MIB module.
        Added h3cIssuUpgradeImageTable h3cIssuOp h3cIssuCompatibleResult
        h3cIssuTestResultTable h3cIssuUpgradeResultTable"
    ::= { h3cCommon 133 }

--
-- Node definitions
--

h3cIssuUpgradeMibObjects OBJECT IDENTIFIER ::= { h3cIssuUpgrade 1 }


h3cIssuUpgradeGroup OBJECT IDENTIFIER ::= { h3cIssuUpgradeMibObjects 1 }


h3cIssuUpgradeImageTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cIssuUpgradeImageEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table listing the image variable types that
        exist in the device."
    ::= { h3cIssuUpgradeGroup 1 }


h3cIssuUpgradeImageEntry OBJECT-TYPE
    SYNTAX H3cIssuUpgradeImageEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An h3cIssuUpgradeImageEntry entry.  Each entry provides an
        image variable type that exists in the device."
    INDEX { h3cIssuUpgradeImageIndex }
    ::= { h3cIssuUpgradeImageTable 1 }


H3cIssuUpgradeImageEntry ::=
    SEQUENCE {
        h3cIssuUpgradeImageIndex
            Integer32,
        h3cIssuUpgradeImageType
            INTEGER,
        h3cIssuUpgradeImageURL
            DisplayString,
        h3cIssuUpgradeImageRowStatus
            RowStatus
     }

h3cIssuUpgradeImageIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of each image."
    ::= { h3cIssuUpgradeImageEntry 1 }


h3cIssuUpgradeImageType OBJECT-TYPE
    SYNTAX INTEGER
        {
        boot(1),
        system(2),
        feature(3),
        ipe(4),
        patch(5)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Types of images that the system can run.  The value of
        this object has five image variable names:
        'boot', 'system', 'feature', 'ipe' and 'patch'.  This table will then
        list these five strings as follows:

              h3cIssuUpgradeImageType
                  boot
                  system
                  feature
                  IPE
                  patch

              The user can assign images (using h3cIssuUpgradeImageURL)
              to these variables and the system will use the assigned
              images to boot."
    ::= { h3cIssuUpgradeImageEntry 2 }


h3cIssuUpgradeImageURL OBJECT-TYPE
    SYNTAX DisplayString (SIZE (1..127))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object contains the path of the image
        of this entity."
    ::= { h3cIssuUpgradeImageEntry 3 }


h3cIssuUpgradeImageRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Row-status of image table."
    ::= { h3cIssuUpgradeImageEntry 4 }


h3cIssuOp OBJECT IDENTIFIER ::= { h3cIssuUpgradeGroup 2 }


h3cIssuOpType OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        done(2),
        test(3),
        install(4),
        rollback(5)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Command to be executed.
        The 'test' command must be performed before the 'install'
        command can be executed.  The 'install'
        command is allowed only if a read of
        this object returns 'test' and the value of object
        h3cIssuOpStatus is 'success'.

        Command                 Remarks

        none      If the user sets this object to 'none', the agent will return a success
                  without performing an upgrade operation.
        done      If this object returns any value other than
                  'none', setting this to 'done' will do
                  the required cleanup of the previous upgrade
                  operation and get the system ready for a new
                  upgrade operation.
        test      Check the version compatibility and upgrade method
                  for the given set of image files.
        install   For all the image entities listed in the
                  h3cIssuUpgradeImageTable, perform the required
                  upgrade operation listed in that table.
        rollback  Abort the current 'install' operation and roll back
                  to the previous version.
          "
    DEFVAL { none }
    ::= { h3cIssuOp 1 }


h3cIssuImageFileOverwrite OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If you want to overwrite the existing file, set the value of
        this object to enable.  Otherwise, set the value of this
        object to disable."
    DEFVAL { true }
    ::= { h3cIssuOp 2 }


h3cIssuOpTrapEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If you want to enable the trap, set the value of
        this object to enable.  Otherwise, set the value of this
        object to disable."
    DEFVAL { true }
    ::= { h3cIssuOp 3 }


h3cIssuOpStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        failure(2),
        inProgress(3),
        success(4),
        rollbackInProgress(5),
        rollbackSuccess(6)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Status of the specified operation.
        none                - No operation was performed.
        failure             - Specified operation has failed.
        inProgress          - Specified operation is in progress.
        success             - Specified operation completed successfully.
        rollbackInProgress     - Rollback operation is in progress.
        rollbackSuccess        - Rollback operation completed successfully.
          "
    DEFVAL { none }
    ::= { h3cIssuOp 4 }


h3cIssuFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the the cause of 'failure' state
        of the object 'h3cIssuOpStatus'.
        This object would be a null string if the value of
        'h3cIssuOpStatus' is not 'failure'."
    ::= { h3cIssuOp 5 }


h3cIssuOpTimeCompleted OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the time when the upgrade operation was completed.
        This object would be a null string if h3cIssuOpType is
        'none'. "
    ::= { h3cIssuOp 6 }


h3cIssuLastOpType OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        done(2),
        test(3),
        install(4),
        rollback(5)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object indicates the previous h3cIssuOp value.
        It will be updated after a new h3cIssuOp is set and delivered
        to the upgrade process.

        Command                 Remarks

        none      If the user sets this object to 'none', agent will return a success
                  without performing an upgrade operation.
        done      If this object returns any value other than
                  'none', setting this to 'done' will do
                  the required cleanup of the previous upgrade
                  operation and get the system ready for a new
                  upgrade operation.
        test      Check the version compatibility and upgrade method
                  for the given set of image files.
        install   For all the image entities listed in the
                  h3cIssuUpgradeImageTable, perform the required
                  upgrade operation listed in that table.
        rollback  Abort the current install operation and roll back
                  to the previous version.
        "
    DEFVAL { none }
    ::= { h3cIssuOp 7 }


h3cIssuLastOpStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        failure(2),
        inProgress(3),
        success(4),
        rollbackInProgress(5),
        rollbackSuccess(6)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object indicates previous h3cIssuOpStatus value.
        It will be updated after new h3cIssuOp is set and delivered
        to upgrade process.
        none                - No operation was performed.
        failure             - Specified operation has failed.
        inProgress          - Specified operation is active.
        success             - Specified operation completed successfully.
        rollbackInProgress     - Rollback operation is in progress.
        rollbackSuccess        - Rollback operation completed successfully.
        "
    DEFVAL { none }
    ::= { h3cIssuOp 8 }


h3cIssuLastOpFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'h3cIssuOpStatus'.
        This object would be a null string if the value of
        'h3cIssuOpStatus' is not 'failure'.
        The value will be updated when new h3cIssuOp is set
        and delivered to the upgrade process."
    ::= { h3cIssuOp 9 }


h3cIssuLastOpTimeCompleted OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the previous h3cIssuOpTimeCompleted value.
        The value will be updated when new h3cIssuOp is set
        and delivered to the upgrade process."
    ::= { h3cIssuOp 10 }


h3cIssuUpgradeResultGroup OBJECT IDENTIFIER ::= { h3cIssuUpgradeMibObjects 2 }


h3cIssuCompatibleResult OBJECT IDENTIFIER ::= { h3cIssuUpgradeResultGroup 1 }


h3cIssuCompatibleResultStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        inCompatible(2),
        compatible(3),
        failure(4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies whether the images provided in
        h3cIssuUpgradeImageTable are compatible with each other as
        far as this module is concerned.
        none            - No operation was performed.
        inCompatible    - The images provided are compatible
                          and can be run on this module.
        compatible      - The images provided are incompatible
                          and can be run on this module.
        failure         - Failed to get the compatibility.
        "
    DEFVAL { none }
    ::= { h3cIssuCompatibleResult 1 }


h3cIssuCompatibleResultFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'h3cIssuCompatibleResultStatus'.
        This object would be a null string if the value of
        'h3cIssuCompatibleResultStatus' is not 'failure'."
    ::= { h3cIssuCompatibleResult 2 }


h3cIssuTestResultTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cIssuTestResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Shows the result of the test operation, from which you can
        see the upgrade method."
    ::= { h3cIssuUpgradeResultGroup 2 }


h3cIssuTestResultEntry OBJECT-TYPE
    SYNTAX H3cIssuTestResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An h3cIssuTestResultEntry entry.  Each entry provides the
        test result of a card in the device."
    INDEX { h3cIssuTestResultIndex }
    ::= { h3cIssuTestResultTable 1 }


H3cIssuTestResultEntry ::=
    SEQUENCE {
        h3cIssuTestResultIndex
            Integer32,
        h3cIssuTestDeviceChassisID
            Integer32,
        h3cIssuTestDeviceSlotID
            Integer32,
        h3cIssuTestDeviceCpuID
            Integer32,
        h3cIssuTestDeviceUpgradeWay
            INTEGER
     }

h3cIssuTestResultIndex OBJECT-TYPE
    SYNTAX Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Internal index, not accessible."
    ::= { h3cIssuTestResultEntry 1 }


h3cIssuTestDeviceChassisID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Chassis ID of the card."
    ::= { h3cIssuTestResultEntry 2 }


h3cIssuTestDeviceSlotID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Slot ID of the card."
    ::= { h3cIssuTestResultEntry 3 }


h3cIssuTestDeviceCpuID OBJECT-TYPE
    SYNTAX Integer32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CPU ID of the card."
    ::= { h3cIssuTestResultEntry 4 }


h3cIssuTestDeviceUpgradeWay OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        reboot(2),
        sequenceReboot(3),
        issuReboot(4),
        serviceUpgrade(5),
        fileUpgrade(6),
        incompatibleUpgrade(7)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade method of the device.
        none                   - No operation was performed.
        reboot                 - The upgrade method of this device is Reboot.
        sequenceReboot         - The upgrade method of this device is SequenceReboot.
        issuReboot             - The upgrade method of this device is IssuReboot.
        serviceUpgrade         - The upgrade method of this device is ServiceReboot.
        fileUpgrade            - The upgrade method of this device is FileReboot.
        incompatibleUpgrade    - The upgrade method of this device is IncompatibleUpgrade.
        "
    DEFVAL { none }
    ::= { h3cIssuTestResultEntry 5 }


h3cIssuUpgradeResultTable OBJECT-TYPE
    SYNTAX SEQUENCE OF H3cIssuUpgradeResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Shows the result of the install operation."
    ::= { h3cIssuUpgradeResultGroup 3 }


h3cIssuUpgradeResultEntry OBJECT-TYPE
    SYNTAX H3cIssuUpgradeResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An h3cIssuUpgradeResultEntry entry.  Each entry provides the
        upgrade result of a card in the device."
    INDEX { h3cIssuUpgradeResultIndex }
    ::= { h3cIssuUpgradeResultTable 1 }


H3cIssuUpgradeResultEntry ::=
    SEQUENCE {
        h3cIssuUpgradeResultIndex
            Integer32,
        h3cIssuUpgradeDeviceChassisID
            Integer32,
        h3cIssuUpgradeDeviceSlotID
            Integer32,
        h3cIssuUpgradeDeviceCpuID
            Integer32,
        h3cIssuUpgradeState
            INTEGER,
        h3cIssuDeviceUpgradeWay
            INTEGER,
        h3cIssuUpgradeDeviceStatus
            INTEGER,
        h3cIssuUpgradeFailedReason
            DisplayString
     }

h3cIssuUpgradeResultIndex OBJECT-TYPE
    SYNTAX Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Internal Index, not accessible."
    ::= { h3cIssuUpgradeResultEntry 1 }


h3cIssuUpgradeDeviceChassisID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Chassis ID of the card."
    ::= { h3cIssuUpgradeResultEntry 2 }


h3cIssuUpgradeDeviceSlotID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Slot ID of the card."
    ::= { h3cIssuUpgradeResultEntry 3 }


h3cIssuUpgradeDeviceCpuID OBJECT-TYPE
    SYNTAX Integer32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CPU ID of the card."
    ::= { h3cIssuUpgradeResultEntry 4 }


h3cIssuUpgradeState OBJECT-TYPE
    SYNTAX INTEGER
        {
        init(1),
        loading(2),
        loaded(3),
        switching(4),
        switchover(5),
        committing(6),
        committed(7),
        rollbacking(8),
        rollbacked(9)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade status of the device.
        init           -The current status of the device is Init.
        loading        -The current status of the device is Loading.
        loaded         -The current status of the device is Loaded.
        switching      -The current status of the device is Switching.
        switchover     -The current status of the device is Switchover.
        committing     -The current status of the device is Committing.
        committed      -The current status of the device is Committed.
        rollbacking    -The current status of the device is Rollbacking.
        rollbacked     -The current status of the device is Rollbacked.
        "
    ::= { h3cIssuUpgradeResultEntry 5 }


h3cIssuDeviceUpgradeWay OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        reboot(2),
        sequenceReboot(3),
        issuReboot(4),
        serviceUpgrade(5),
        fileUpgrade(6),
        incompatibleUpgrade(7)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade method of the card.
        none                   - No operation was performed.
        reboot                 - The upgrade method of this device is Reboot.
        sequenceReboot         - The upgrade method of this device is SequenceReboot.
        issuReboot             - The upgrade method of this device is IssuReboot.
        serviceUpgrade         - The upgrade method of this device is ServiceReboot.
        fileUpgrade            - The upgrade method of this device is FileReboot.
        incompatibleUpgrade    - The upgrade method of this device is IncompatibleUpgrade.
        "
    ::= { h3cIssuUpgradeResultEntry 6 }


h3cIssuUpgradeDeviceStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        waitingUpgrade(1),
        inProcess(2),
        success(3),
        failure(4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade status of the device."
    ::= { h3cIssuUpgradeResultEntry 7 }


h3cIssuUpgradeFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'h3cIssuUpgradeDeviceStatus'.
        This object would be a null string if the value of
        'h3cIssuCompatibleResultStatus' is not 'failure'."
    ::= { h3cIssuUpgradeResultEntry 8 }


h3cIssuUpgradeNotify OBJECT IDENTIFIER ::= { h3cIssuUpgrade 2 }


h3cIssuUpgradeTrapPrefix OBJECT IDENTIFIER ::= { h3cIssuUpgradeNotify 0 }


h3cIssuUpgradeOpCompletionNotify NOTIFICATION-TYPE
    OBJECTS { h3cIssuOpType, h3cIssuOpStatus, h3cIssuFailedReason, h3cIssuOpTimeCompleted }
    STATUS current
    DESCRIPTION
        "An h3cIssuUpgradeOpCompletionNotify is sent at the
        completion of upgrade operation denoted by
        h3cIssuOp object, if such a notification
        was requested when the operation was initiated.
        h3cIssuOpType indicates the type of the
        operation.  h3cIssuOpStatus indicates the
        result of the operation.  h3cIssuFailedReason
        indicates the operation failure reason.
        h3cIssuOpTimeCompleted indicates the time
        when the operation was completed."
    ::= { h3cIssuUpgradeTrapPrefix 1 }



END