GBNL2QACL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64,IpAddress FROM SNMPv2-SMI DisplayString, TruthValue,MacAddress,RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnL2 FROM GREENTECH-MASTER-MIB PortList FROM Q-BRIDGE-MIB mib-2 FROM RFC1213-MIB VlanId FROM Q-BRIDGE-MIB TOSType FROM OSPF-MIB; gbnL2QACL MODULE-IDENTITY LAST-UPDATED "0309260001Z" -- sep 26,2003 ORGANIZATION "Greentech" CONTACT-INFO "Adam Armstrong E-mail: adama@observium.org" DESCRIPTION "QTECH Enterprise MIB definition." REVISION "0309260001Z" -- sep 26,2003 DESCRIPTION "Initial MIB creation." ::= { gbnL2 4 } AdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The AdminStatus of an item: 'valid' indicates that it is running,while 'invalid' indicates that it is not." SYNTAX INTEGER { active (1), inactive (2) } Action ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "permit or deny" SYNTAX INTEGER { permit (101), deny (100) } Dscp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "dscp priority" SYNTAX Integer32 (0..63) AclType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "standard、extend、link、user" SYNTAX INTEGER { standard(1), extend (2),link(3), user (4) } PacketFlowType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "broadcast、multicast、unicast" SYNTAX INTEGER { broadcast(1), multicast(2), unicast(3) } -- -- QoS queue-scheduer -- qosQueueSchedulerGroup OBJECT IDENTIFIER ::= { gbnL2QACL 1 } qosWrrQueue1Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 1th queue(%)." ::= { qosQueueSchedulerGroup 1 } qosWrrQueue2Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 2th queue(%)." ::= { qosQueueSchedulerGroup 2 } qosWrrQueue3Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 3th queue(%)." ::= { qosQueueSchedulerGroup 3 } qosWrrQueue4Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 4th queue(%)." ::= { qosQueueSchedulerGroup 4 } qosWrrMaxDelayValue OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS current DESCRIPTION " The highest priority queue scheduling queue when the maximum waiting time." ::= { qosQueueSchedulerGroup 5 } qosQueueSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority (1), wrr(2), wrrMaxDelay(3) } ACCESS read-write STATUS current DESCRIPTION " Queue scheduling mode: absolute priority, weighted round robin scheduling, weighted round robin scheduling maximum delay. " DEFVAL { strictPriority } ::= { qosQueueSchedulerGroup 6 } qosWrrQueue5Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 5th queue(%)." ::= { qosQueueSchedulerGroup 7 } qosWrrQueue6Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 6th queue(%)." ::= { qosQueueSchedulerGroup 8 } qosWrrQueue7Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 7th queue(%)." ::= { qosQueueSchedulerGroup 9 } qosWrrQueue8Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 8th queue(%)." ::= { qosQueueSchedulerGroup 10 } -- ACL table Variables -- These parameters apply globally to the swicth's aclNumTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Access control lists based on numbers, which total from the five types: the standard-based digital access control lists, extended access list based on numbers, based on the second level access control list, based on the number of custom access control lists, and based on numbers interface to access control lists. One standard access control list values for the 1-99, extended access control lists values for the 100-199, the second level access control list for the 200-299 values, custom values for the access control list 300-399 ." ::= { gbnL2QACL 2 } aclNumEntry OBJECT-TYPE SYNTAX AclNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Definition of a number-based access control lists." INDEX { aclNumNumber } ::= { aclNumTable 1 } AclNumEntry ::= SEQUENCE { aclNumNumber Integer32, aclNumType AclType, aclNumMatchOrder INTEGER, aclNumTotleSubitems Integer32, aclNumRowStatus RowStatus } aclNumNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的标号，它的取值范围为1－399. 它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumEntry 1 } aclNumType OBJECT-TYPE SYNTAX AclType MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的类型，其中number为1-99为标准ACL， 100-199为扩展ACL，200-299为二层ACL，300-399为用户自定义ACL." ::= { aclNumEntry 2 } aclNumMatchOrder OBJECT-TYPE SYNTAX INTEGER { config (0), auto (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问控制列表的配置顺序，auto 所用的“深度优先“ 原则是指：把指定数据包范围最小的语句排在最前面。这一点可以 通过比较地址的通配符来实现，通配符越小，则指定的主机的范围 就越小。比如129.102.1.1 0.0.0.0 指定了一台主机：129.102.1.1 而129.102.1.1 0.0.255.255 则指定了一个网段： 129.102.1.1 ～ 129.102.255.255，显然前者在访问控制规则中排在前面。具体标准 为：对于标准访问控制规则的语句，直接比较源地址通配符，通配符 相同的则按配置顺序；对于基于接口过滤的访问控制规则，配置了'any' 的规则排在后面，其它按配置顺序；对于扩展访问控制规则，首先比 较源地址通配符，相同的再比较目的地址通配符，仍相同的则比较端 口号的范围，范围小的排在前面，如果端口号范围也相同则按配置顺序， 默认按照用户的配置顺序即config。" DEFVAL { config } -- config ::= { aclNumEntry 3 } aclNumTotleSubitems OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "一条访问控制列表可以定义多条子规则，这些子规则按照一定的顺序排列 成一条访问控制列表，每条ACL最多可以定义128项子规则。" ::= { aclNumEntry 4 } aclNumRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL的状态，添加或删除。" ::= { aclNumEntry 5 } --ACL子项定义，基于数字的标准访问控制列表子项。 aclNumStdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 3 } aclNumStdSubitemEntry OBJECT-TYPE SYNTAX AclNumStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNumStdNum, aclNumStdSubNum } ::= { aclNumStdSubitemTable 1 } AclNumStdSubitemEntry ::= SEQUENCE { aclNumStdNum Integer32, aclNumStdSubNum Integer32, aclNumStdSubitemAdminStatus AdminStatus, aclNumStdSubitemAction Action, aclNumStdSubitemSrcAddr IpAddress, aclNumStdSubitemSrcAddrWldmsk IpAddress, aclNumStdFragments TruthValue, aclNumStdTimeRange OCTET STRING, aclNumStdSubitemRowStatus RowStatus } aclNumStdNum OBJECT-TYPE SYNTAX Integer32 (1..99) MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. 它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumStdSubitemEntry 1 } aclNumStdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNumStdSubitemEntry 2 } aclNumStdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumStdSubitemEntry 3 } aclNumStdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumStdSubitemEntry 4 } aclNumStdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址" ::= { aclNumStdSubitemEntry 5 } aclNumStdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址通配符" ::= { aclNumStdSubitemEntry 6 } aclNumStdFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址通配符" DEFVAL { false } -- invalid ::= { aclNumStdSubitemEntry 7 } aclNumStdTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNumStdSubitemEntry 8 } aclNumStdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNumStdSubitemEntry 9 } --ACL子项定义，基于数字的扩展访问控制列表子项。 aclNumExdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条扩展访问控制列表子项。它是通过对标准访问控制列表的补充。" ::= { gbnL2QACL 4 } aclNumExdSubitemEntry OBJECT-TYPE SYNTAX AclNumExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNumExdNum, aclNumExdSubNum} ::= { aclNumExdSubitemTable 1 } AclNumExdSubitemEntry ::= SEQUENCE { aclNumExdNum Integer32, aclNumExdSubNum Integer32, aclNumExdSubitemAdminStatus AdminStatus, aclNumExdSubitemAction Action, aclNumExdSubitemProtocal Integer32, aclNumExdSubitemSrcAddr IpAddress, aclNumExdSubitemSrcAddrWldmsk IpAddress, aclNumExdSubitemDstAddr IpAddress, aclNumExdSubitemDstAddrWldmsk IpAddress, aclNumExdSubitemSrcPort Integer32, aclNumExdSubitemSrcPortWldmsk Integer32, aclNumExdSubitemDstPort Integer32, aclNumExdSubitemDstPortWldmsk Integer32, aclNumExdSubitemIcmpType Integer32, aclNumExdSubitemIcmpCode Integer32, aclNumExdSubitemTcpEstablished TruthValue, aclNumExdSubitemPrecedence Integer32, aclNumExdSubitemTos TOSType, aclNumExdSubitemDscp Dscp, aclNumExdSubitemFragments TruthValue, aclNumExdSubitemTimeRange OCTET STRING, aclNumExdSubitemRowStatus RowStatus } aclNumExdNum OBJECT-TYPE SYNTAX Integer32 (100..199) MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. 它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumExdSubitemEntry 1 } aclNumExdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNumExdSubitemEntry 2 } aclNumExdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumExdSubitemEntry 3 } aclNumExdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumExdSubitemEntry 4 } aclNumExdSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "过滤某种协议类型的报文" ::= { aclNumExdSubitemEntry 5 } aclNumExdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的原地址" ::= { aclNumExdSubitemEntry 6 } aclNumExdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的原地址通配符" ::= { aclNumExdSubitemEntry 7 } aclNumExdSubitemDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址" ::= { aclNumExdSubitemEntry 8 } aclNumExdSubitemDstAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址通配符" ::= { aclNumExdSubitemEntry 9 } aclNumExdSubitemSrcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "filter the special TCP/UDP ports" --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNumExdSubitemEntry 10 } aclNumExdSubitemSrcPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "source ports wildcard" --扩展访问控制列表子项的源端口号通配符 ::= { aclNumExdSubitemEntry 11 } aclNumExdSubitemDstPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "filter the special TCP/UDP ports" --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNumExdSubitemEntry 12 } aclNumExdSubitemDstPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "destination ports wildcard" --扩展访问控制列表子项的源端口号通配符 ::= { aclNumExdSubitemEntry 13 } aclNumExdSubitemIcmpType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "对ICMP的特定类型的包进行过滤" ::= { aclNumExdSubitemEntry 14 } aclNumExdSubitemIcmpCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "对ICMP的特定类型，特定代码的包进行过滤" ::= { aclNumExdSubitemEntry 15 } aclNumExdSubitemTcpEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "对TCP第一个建链的包进行过滤" DEFVAL { false } -- invalid ::= { aclNumExdSubitemEntry 16 } aclNumExdSubitemPrecedence OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "对特定IP优先级的包进行过滤" ::= { aclNumExdSubitemEntry 17 } aclNumExdSubitemTos OBJECT-TYPE SYNTAX TOSType MAX-ACCESS read-write STATUS current DESCRIPTION "对数据包中TOS字段等于特定值的包进行过滤" ::= { aclNumExdSubitemEntry 18 } aclNumExdSubitemDscp OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-write STATUS current DESCRIPTION "对数据包中DSCP字段等于特定值的包进行过滤" ::= { aclNumExdSubitemEntry 19 } aclNumExdSubitemFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址通配符" DEFVAL { false } -- invalid ::= { aclNumExdSubitemEntry 20 } aclNumExdSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNumExdSubitemEntry 21 } aclNumExdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNumExdSubitemEntry 22 } --ACL子项定义，基于数字的二层访问控制列表子项。 aclNumLnkSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条二层访问控制列表子项。" ::= { gbnL2QACL 5 } aclNumLnkSubitemEntry OBJECT-TYPE SYNTAX AclNumLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条二层访问控制列表子项." INDEX { aclNumLnkNum, aclNumLnkSubNum} ::= { aclNumLnkSubitemTable 1 } AclNumLnkSubitemEntry ::= SEQUENCE { aclNumLnkNum Integer32, aclNumLnkSubNum Integer32, aclNumLnkSubitemAdminStatus AdminStatus, aclNumLnkSubitemAction Action, aclNumLnkSubitemProtocal Integer32, aclNumLnkSubitemCos Integer32, aclNumLnkSubitemSrcVlanID VlanId, aclNumLnkSubitemSrcMacAddr MacAddress, aclNumLnkSubitemSrcMacWldmsk MacAddress, aclNumLnkSubitemDstMacAddr MacAddress, aclNumLnkSubitemDstMacWldmsk MacAddress, aclNumLnkSubitemSrcPortNum Integer32, aclNumLnkSubitemDstPortNum Integer32, aclNumLnkSubitemTimeRange OCTET STRING, aclNumLnkSubitemRowStatus RowStatus, aclNumLnkSubitemSrcEndVlanID VlanId } aclNumLnkNum OBJECT-TYPE SYNTAX Integer32 (200..299) MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. 它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumLnkSubitemEntry 1 } aclNumLnkSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNumLnkSubitemEntry 2 } aclNumLnkSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumLnkSubitemEntry 3 } aclNumLnkSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumLnkSubitemEntry 4 } aclNumLnkSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "过滤某种协议类型的报文" ::= { aclNumLnkSubitemEntry 5 } aclNumLnkSubitemCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "802.1x优先级" ::= { aclNumLnkSubitemEntry 6 } aclNumLnkSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 7 } aclNumLnkSubitemSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC通配符共同作用得到感兴趣的源MAC地址，并对这些 MAC地址作处理。" ::= { aclNumLnkSubitemEntry 8 } aclNumLnkSubitemSrcMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC地址共同作用得到感兴趣的源MAC地址，并对这些 MAC地址作处理。" ::= { aclNumLnkSubitemEntry 9 } aclNumLnkSubitemDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC通配符共同作用得到感兴趣的目的MAC地址，并对这些 MAC地址作处理。" ::= { aclNumLnkSubitemEntry 10 } aclNumLnkSubitemDstMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC地址共同作用得到感兴趣的目的MAC地址，并对这些 MAC地址作处理。" ::= { aclNumLnkSubitemEntry 11 } aclNumLnkSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "百兆以太网端口号1－24，千兆以太网端口号1－2" ::= { aclNumLnkSubitemEntry 12 } aclNumLnkSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "1－24为百兆以太网端口号1－24，25－26为千兆以太网端口号1－2，27为已知组播，28为CPU端口号，29为DLF" ::= { aclNumLnkSubitemEntry 13 } aclNumLnkSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNumLnkSubitemEntry 14 } aclNumLnkSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNumLnkSubitemEntry 15 } aclNumLnkSubitemSrcEndVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 16 } --ACL子项定义，基于数字的自定义访问控制列表子项。 aclNumUserSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条自定义访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 6 } aclNumUserSubitemEntry OBJECT-TYPE SYNTAX AclNumUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNumUserNum, aclNumUserSubNum } ::= { aclNumUserSubitemTable 1 } AclNumUserSubitemEntry ::= SEQUENCE { aclNumUserNum Integer32, aclNumUserSubNum Integer32, aclNumUserSubitemAdminStatus AdminStatus, aclNumUserSubitemAction Action, aclNumUserSubitemSrcPortNum Integer32, aclNumUserSubitemDstPortNum Integer32, aclNumUserSubitemRule OCTET STRING, aclNumUserSubitemMask OCTET STRING, aclNumUserSubitemSrcVlanID VlanId, aclNumUserTimeRange OCTET STRING, aclNumUserSubitemRowStatus RowStatus } aclNumUserNum OBJECT-TYPE SYNTAX Integer32 (300..399) MAX-ACCESS read-only STATUS current DESCRIPTION "基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. 它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumUserSubitemEntry 1 } aclNumUserSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNumUserSubitemEntry 2 } aclNumUserSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumUserSubitemEntry 3 } aclNumUserSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumUserSubitemEntry 4 } aclNumUserSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "百兆以太网端口号1－24，千兆以太网端口号1－2" ::= { aclNumUserSubitemEntry 5 } aclNumUserSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "1－24为百兆以太网端口号1－24，25－26为千兆以太网端口号1－2，27为已知组播，28为CPU端口号，29为DLF" ::= { aclNumUserSubitemEntry 6 } aclNumUserSubitemRule OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "用户自定义访问控制列表子项的匹配字符串" ::= { aclNumUserSubitemEntry 7 } aclNumUserSubitemMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "用户自定义访问控制列表子项的匹配字符串掩码" ::= { aclNumUserSubitemEntry 8 } aclNumUserSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNumUserSubitemEntry 9 } aclNumUserTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNumUserSubitemEntry 10 } aclNumUserSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNumUserSubitemEntry 11 } --基于名字的访问控制列表定义 aclNamedTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "基于名字的访问控制列表，它一共由四种类型：基于名字的标准访问控制列表、 基于数名字的扩展访问列表、基于名字的二层访问控制列表、基于名字的自定义访 问控制列表." ::= { gbnL2QACL 7 } aclNamedEntry OBJECT-TYPE SYNTAX AclNamedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条基于名字的访问控制列表." INDEX { aclNamedName } ::= { aclNamedTable 1 } AclNamedEntry ::= SEQUENCE { aclNamedName OCTET STRING, aclNamedType AclType, aclNamedMatchOrder INTEGER, aclNamedTotleSubitems Integer32, aclNamedRowStatus RowStatus } aclNamedName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "基于名字的访问控制列表的名字，各个访问控制列表（包括不同类 型的访问控制列表）不能重名。" ::= { aclNamedEntry 1 } aclNamedType OBJECT-TYPE SYNTAX AclType MAX-ACCESS read-write STATUS current DESCRIPTION "基于名字的访问控制列表的类型，同基于数字的ACL，但它的类型不由名字决定" ::= { aclNamedEntry 2 } aclNamedMatchOrder OBJECT-TYPE SYNTAX INTEGER { config (0), auto (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问控制列表的配置顺序，auto 所用的“深度优先“ 原则是指：把指定数据包范围最小的语句排在最前面。这一点可以 通过比较地址的通配符来实现，通配符越小，则指定的主机的范围 就越小。比如129.102.1.1 0.0.0.0 指定了一台主机：129.102.1.1 而129.102.1.1 0.0.255.255 则指定了一个网段： 129.102.1.1 ～ 129.102.255.255，显然前者在访问控制规则中排在前面。具体标准 为：对于标准访问控制规则的语句，直接比较源地址通配符，通配符 相同的则按配置顺序；对于基于接口过滤的访问控制规则，配置了'any' 的规则排在后面，其它按配置顺序；对于扩展访问控制规则，首先比 较源地址通配符，相同的再比较目的地址通配符，仍相同的则比较端 口号的范围，范围小的排在前面，如果端口号范围也相同则按配置顺序， 默认按照用户的配置顺序即config。" DEFVAL { config } -- config ::= { aclNamedEntry 3 } aclNamedTotleSubitems OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "一条访问控制列表可以定义多条子规则，这些子规则按照一定的顺序排列 成一条访问控制列表，每条ACL最多可以定义128项子规则。" ::= { aclNamedEntry 4 } aclNamedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL的状态，添加或删除。" ::= { aclNamedEntry 5 } --ACL子项定义，基于名字的标准访问控制列表子项。 aclNamedStdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 8 } aclNamedStdSubitemEntry OBJECT-TYPE SYNTAX AclNamedStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNamedStdName, aclNamedStdSubNum } ::= { aclNamedStdSubitemTable 1 } AclNamedStdSubitemEntry ::= SEQUENCE { aclNamedStdName OCTET STRING, aclNamedStdSubNum Integer32, aclNamedStdSubitemAdminStatus AdminStatus, aclNamedStdSubitemAction Action, aclNamedStdSubitemSrcAddr IpAddress, aclNamedStdSubitemSrcAddrWldmsk IpAddress, aclNamedStdFragments TruthValue, aclNamedStdTimeRange OCTET STRING, aclNamedStdSubitemRowStatus RowStatus } aclNamedStdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedStdSubitemEntry 1 } aclNamedStdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNamedStdSubitemEntry 2 } aclNamedStdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedStdSubitemEntry 3 } aclNamedStdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedStdSubitemEntry 4 } aclNamedStdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址" ::= { aclNamedStdSubitemEntry 5 } aclNamedStdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址通配符" ::= { aclNamedStdSubitemEntry 6 } aclNamedStdFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "标准访问控制列表子项的原地址通配符" DEFVAL { false } -- invalid ::= { aclNamedStdSubitemEntry 7 } aclNamedStdTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNamedStdSubitemEntry 8 } aclNamedStdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNamedStdSubitemEntry 9 } --ACL子项定义，基于名字的扩展访问控制列表子项。 aclNamedExdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条扩展访问控制列表子项。它是通过对标准访问控制列表的补充。" ::= { gbnL2QACL 9 } aclNamedExdSubitemEntry OBJECT-TYPE SYNTAX AclNamedExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNamedExdName, aclNamedExdSubNum} ::= { aclNamedExdSubitemTable 1 } AclNamedExdSubitemEntry ::= SEQUENCE { aclNamedExdName OCTET STRING, aclNamedExdSubNum Integer32, aclNamedExdSubitemAdminStatus AdminStatus, aclNamedExdSubitemAction Action, aclNamedExdSubitemProtocal Integer32, aclNamedExdSubitemSrcAddr IpAddress, aclNamedExdSubitemSrcAddrWldmsk IpAddress, aclNamedExdSubitemDstAddr IpAddress, aclNamedExdSubitemDstAddrWldmsk IpAddress, aclNamedExdSubitemSrcPort Integer32, aclNamedExdSubitemSrcPortWldmsk Integer32, aclNamedExdSubitemDstPort Integer32, aclNamedExdSubitemDstPortWldmsk Integer32, aclNamedExdSubitemIcmpType Integer32, aclNamedExdSubitemIcmpCode Integer32, aclNamedExdSubitemTcpEstablished TruthValue, aclNamedExdSubitemPrecedence Integer32, aclNamedExdSubitemTos TOSType, aclNamedExdSubitemDscp Dscp, aclNamedExdSubitemFragments TruthValue, aclNamedExdSubitemTimeRange OCTET STRING, aclNamedExdSubitemRowStatus RowStatus } aclNamedExdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedExdSubitemEntry 1 } aclNamedExdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNamedExdSubitemEntry 2 } aclNamedExdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedExdSubitemEntry 3 } aclNamedExdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedExdSubitemEntry 4 } aclNamedExdSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "过滤某种协议类型的报文" ::= { aclNamedExdSubitemEntry 5 } aclNamedExdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的原地址" ::= { aclNamedExdSubitemEntry 6 } aclNamedExdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的原地址通配符" ::= { aclNamedExdSubitemEntry 7 } aclNamedExdSubitemDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址" ::= { aclNamedExdSubitemEntry 8 } aclNamedExdSubitemDstAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址通配符" ::= { aclNamedExdSubitemEntry 9 } aclNamedExdSubitemSrcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "filter the special TCP/UDP ports" --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNamedExdSubitemEntry 10 } aclNamedExdSubitemSrcPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "source ports wildcard" --扩展访问控制列表子项的源端口号通配符 ::= { aclNamedExdSubitemEntry 11 } aclNamedExdSubitemDstPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "filter the special TCP/UDP ports" --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNamedExdSubitemEntry 12 } aclNamedExdSubitemDstPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "destination ports wildcard" --扩展访问控制列表子项的源端口号通配符 ::= { aclNamedExdSubitemEntry 13 } aclNamedExdSubitemIcmpType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "对ICMP的特定类型的包进行过滤" ::= { aclNamedExdSubitemEntry 14 } aclNamedExdSubitemIcmpCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "对ICMP的特定类型，特定代码的包进行过滤" ::= { aclNamedExdSubitemEntry 15 } aclNamedExdSubitemTcpEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "对TCP第一个建链的包进行过滤" DEFVAL { false } -- invalid ::= { aclNamedExdSubitemEntry 16 } aclNamedExdSubitemPrecedence OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "对特定IP优先级的包进行过滤" ::= { aclNamedExdSubitemEntry 17 } aclNamedExdSubitemTos OBJECT-TYPE SYNTAX TOSType MAX-ACCESS read-write STATUS current DESCRIPTION "对数据包中TOS字段等于特定值的包进行过滤" ::= { aclNamedExdSubitemEntry 18 } aclNamedExdSubitemDscp OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-write STATUS current DESCRIPTION "对数据包中DSCP字段等于特定值的包进行过滤" ::= { aclNamedExdSubitemEntry 19 } aclNamedExdSubitemFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "扩展访问控制列表子项的目的地址通配符" DEFVAL { false } -- invalid ::= { aclNamedExdSubitemEntry 20 } aclNamedExdSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNamedExdSubitemEntry 21 } aclNamedExdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNamedExdSubitemEntry 22 } --ACL子项定义，基于名字的二层访问控制列表子项。 aclNamedLnkSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条二层访问控制列表子项。" ::= { gbnL2QACL 10 } aclNamedLnkSubitemEntry OBJECT-TYPE SYNTAX AclNamedLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条二层访问控制列表子项." INDEX { aclNamedLnkName, aclNamedLnkSubNum} ::= { aclNamedLnkSubitemTable 1 } AclNamedLnkSubitemEntry ::= SEQUENCE { aclNamedLnkName OCTET STRING, aclNamedLnkSubNum Integer32, aclNamedLnkSubitemAdminStatus AdminStatus, aclNamedLnkSubitemAction Action, aclNamedLnkSubitemProtocal Integer32, aclNamedLnkSubitemCos Integer32, aclNamedLnkSubitemSrcVlanID VlanId, aclNamedLnkSubitemSrcMacAddr MacAddress, aclNamedLnkSubitemSrcMacWldmsk MacAddress, aclNamedLnkSubitemDstMacAddr MacAddress, aclNamedLnkSubitemDstMacWldmsk MacAddress, aclNamedLnkSubitemSrcPortNum Integer32, aclNamedLnkSubitemDstPortNum Integer32, aclNamedLnkSubitemTimeRange OCTET STRING, aclNamedLnkSubitemRowStatus RowStatus, aclNamedLnkSubitemSrcEndVlanID VlanId } aclNamedLnkName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedLnkSubitemEntry 1 } aclNamedLnkSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNamedLnkSubitemEntry 2 } aclNamedLnkSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedLnkSubitemEntry 3 } aclNamedLnkSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedLnkSubitemEntry 4 } aclNamedLnkSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "过滤某种协议类型的报文" ::= { aclNamedLnkSubitemEntry 5 } aclNamedLnkSubitemCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "过滤某种协议类型的报文" ::= { aclNamedLnkSubitemEntry 6 } aclNamedLnkSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 7 } aclNamedLnkSubitemSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC通配符共同作用得到感兴趣的源MAC地址，并对这些 MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 8 } aclNamedLnkSubitemSrcMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC地址共同作用得到感兴趣的源MAC地址，并对这些 MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 9 } aclNamedLnkSubitemDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC通配符共同作用得到感兴趣的目的MAC地址，并对这些 MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 10 } aclNamedLnkSubitemDstMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "它于MAC地址共同作用得到感兴趣的目的MAC地址，并对这些 MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 11 } aclNamedLnkSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "百兆以太网端口号1－24，千兆以太网端口号1－2" ::= { aclNamedLnkSubitemEntry 12 } aclNamedLnkSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "1－24为百兆以太网端口号1－24，25－26为千兆以太网端口号1－2，27为已知组播，28为CPU端口号，29为DLF" ::= { aclNamedLnkSubitemEntry 13 } aclNamedLnkSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNamedLnkSubitemEntry 14 } aclNamedLnkSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNamedLnkSubitemEntry 15 } aclNamedLnkSubitemSrcEndVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 16 } --ACL子项定义，基于名字的自定义访问控制列表子项。 aclNamedUserSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条自定义访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 11 } aclNamedUserSubitemEntry OBJECT-TYPE SYNTAX AclNamedUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条标准访问控制列表子项." INDEX { aclNamedUserName, aclNamedUserSubNum } ::= { aclNamedUserSubitemTable 1 } AclNamedUserSubitemEntry ::= SEQUENCE { aclNamedUserName OCTET STRING, aclNamedUserSubNum Integer32, aclNamedUserSubitemAdminStatus AdminStatus, aclNamedUserSubitemAction Action, aclNamedUserSubitemSrcPortNum Integer32, aclNamedUserSubitemDstPortNum Integer32, aclNamedUserSubitemRule OCTET STRING, aclNamedUserSubitemMask OCTET STRING, aclNamedUserSubitemSrcVlanID VlanId, aclNamedUserTimeRange OCTET STRING, aclNamedUserSubitemRowStatus RowStatus } aclNamedUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedUserSubitemEntry 1 } aclNamedUserSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "访问控制列表的子项号，0－127。" ::= { aclNamedUserSubitemEntry 2 } aclNamedUserSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedUserSubitemEntry 3 } aclNamedUserSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedUserSubitemEntry 4 } aclNamedUserSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "百兆以太网端口号1－24，千兆以太网端口号1－2" ::= { aclNamedUserSubitemEntry 5 } aclNamedUserSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "1－24为百兆以太网端口号1－24，25－26为千兆以太网端口号1－2，27为已知组播，28为CPU端口号，29为DLF" ::= { aclNamedUserSubitemEntry 6 } aclNamedUserSubitemRule OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "用户自定义访问控制列表子项的匹配字符串" ::= { aclNamedUserSubitemEntry 7 } aclNamedUserSubitemMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "用户自定义访问控制列表子项的匹配字符串掩码" ::= { aclNamedUserSubitemEntry 8 } aclNamedUserSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "对VLAN ID为特定值的数据包进行过滤" ::= { aclNamedUserSubitemEntry 9 } aclNamedUserTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "访问列表子项起作用的时间段" ::= { aclNamedUserSubitemEntry 10 } aclNamedUserSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前ACL子项的状态，添加或删除。" ::= { aclNamedUserSubitemEntry 11 } --时间段定义 aclTimeRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "time range" ::= { gbnL2QACL 12 } aclTimeRangeEntry OBJECT-TYPE SYNTAX AclTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条时间段." INDEX { aclTimeRangeName } ::= { aclTimeRangeTable 1 } AclTimeRangeEntry ::= SEQUENCE { aclTimeRangeName OCTET STRING, aclTimeRangeTotleAbsolutes Integer32, aclTimeRangeTotlePeriods Integer32, aclTimeRangeActive TruthValue, aclTimeRangeRowStatus RowStatus } aclTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "时间段的名字" ::= { aclTimeRangeEntry 1 } aclTimeRangeTotleAbsolutes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "一个时间段最多可以配置12个绝对时间段，这里为已经配置的绝对时间段的数目" DEFVAL { invalid } -- invalid ::= { aclTimeRangeEntry 2 } aclTimeRangeTotlePeriods OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "一个时间段最多可以配置32个周期时间段，这里为已经配置的周期时间段的数目" ::= { aclTimeRangeEntry 3 } aclTimeRangeActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "时间段的激活状态" ::= { aclTimeRangeEntry 4 } aclTimeRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "表示当前时间段的状态，添加或删除。" ::= { aclTimeRangeEntry 5 } --绝对时间段定义。 aclTimeRangeAbsoluteTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangeAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一个绝对时间段" ::= { gbnL2QACL 13 } aclTimeRangeAbsoluteEntry OBJECT-TYPE SYNTAX AclTimeRangeAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条绝对时间段." INDEX { aclTimeRangeAbsoluteName, aclTimeRangeAbsoluteStartTime, aclTimeRangeAbsoluteEndTime } ::= { aclTimeRangeAbsoluteTable 1 } AclTimeRangeAbsoluteEntry ::= SEQUENCE { aclTimeRangeAbsoluteName OCTET STRING, aclTimeRangeAbsoluteStartTime Unsigned32, aclTimeRangeAbsoluteEndTime Unsigned32, aclTimeRangeAbsoluteRowStatus RowStatus } aclTimeRangeAbsoluteName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "时间段的名字" ::= { aclTimeRangeAbsoluteEntry 1 } aclTimeRangeAbsoluteStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "绝对时间段起始时间(日历时间)" ::= { aclTimeRangeAbsoluteEntry 2 } aclTimeRangeAbsoluteEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "绝对时间段终止时间的年份" ::= { aclTimeRangeAbsoluteEntry 3 } aclTimeRangeAbsoluteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "绝对时间段的当前状态" ::= { aclTimeRangeAbsoluteEntry 4 } --周期时间段定义。 aclTimeRangePeriodTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangePeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一个周期时间段" ::= { gbnL2QACL 14 } aclTimeRangePeriodEntry OBJECT-TYPE SYNTAX AclTimeRangePeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "定义一条周期时间段." INDEX { aclTimeRangePeriodName, aclTimeRangePeriodStartWeekDay, aclTimeRangePeriodStartHour, aclTimeRangePeriodStartMin, aclTimeRangePeriodEndWeekDay, aclTimeRangePeriodEndHour, aclTimeRangePeriodEndMin } ::= { aclTimeRangePeriodTable 1 } AclTimeRangePeriodEntry ::= SEQUENCE { aclTimeRangePeriodName OCTET STRING, aclTimeRangePeriodStartWeekDay Unsigned32, aclTimeRangePeriodStartHour Unsigned32, aclTimeRangePeriodStartMin Unsigned32, aclTimeRangePeriodEndWeekDay Unsigned32, aclTimeRangePeriodEndHour Unsigned32, aclTimeRangePeriodEndMin Unsigned32, aclTimeRangePeriodRowStatus RowStatus } aclTimeRangePeriodName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "时间段的名字" ::= { aclTimeRangePeriodEntry 1 } aclTimeRangePeriodStartWeekDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段起始时间的日期（星期几）" ::= { aclTimeRangePeriodEntry 2 } aclTimeRangePeriodStartHour OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段的起始时间（几点）" ::= { aclTimeRangePeriodEntry 3 } aclTimeRangePeriodStartMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段的起始时间（几分）" ::= { aclTimeRangePeriodEntry 4 } aclTimeRangePeriodEndWeekDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段终止时间的日期（星期几）" ::= { aclTimeRangePeriodEntry 5 } aclTimeRangePeriodEndHour OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段的终止时间（几点）" ::= { aclTimeRangePeriodEntry 6 } aclTimeRangePeriodEndMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "周期时间段的终止时间（几分）" ::= { aclTimeRangePeriodEntry 7 } aclTimeRangePeriodRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "周期时间段的当前状态" ::= { aclTimeRangePeriodEntry 8 } -- -- the active ACL group -- aclActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF AclActiveEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of active acl entries. " ::= { gbnL2QACL 15 } aclActiveEntry OBJECT-TYPE SYNTAX AclActiveEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of active acl entries. " INDEX { aclActiveIndex } ::= { aclActiveTable 1 } AclActiveEntry ::= SEQUENCE { aclActiveIndex INTEGER, aclActiveUserGroupName OCTET STRING, aclActiveUserGroupSubitem INTEGER, aclActiveIpGroupName OCTET STRING, aclActiveIpGroupSubitem INTEGER, aclActiveLinkGroupName OCTET STRING, aclActiveLinkGroupSubitem INTEGER, aclActiveBlock0Priority INTEGER, aclActiveBlock1Priority INTEGER, aclActiveBlock2Priority INTEGER, aclActiveBlock3Priority INTEGER, aclActiveBlock4Priority INTEGER, aclActiveConfigSequence INTEGER, aclActiveRunning TruthValue, aclActiveRowStatus RowStatus, aclActiveBlock5Priority INTEGER, aclActiveBlock6Priority INTEGER, aclActiveBlock7Priority INTEGER, aclActiveBlock8Priority INTEGER, aclActiveBlock9Priority INTEGER, aclActiveBlock10Priority INTEGER, aclActiveBlock11Priority INTEGER } aclActiveIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each active acl. " ::= { aclActiveEntry 1 } aclActiveUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active user group acl. " ::= { aclActiveEntry 2 } aclActiveUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active user group acl subitem. " ::= { aclActiveEntry 3 } aclActiveIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active ip group acl. " ::= { aclActiveEntry 4 } aclActiveIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active ip group acl subitem. " ::= { aclActiveEntry 5 } aclActiveLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active link group acl. " ::= { aclActiveEntry 6 } aclActiveLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active link group acl subitem. " ::= { aclActiveEntry 7 } aclActiveBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 8 } aclActiveBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 9 } aclActiveBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 10 } aclActiveBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 11 } aclActiveBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 12 } aclActiveConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the active ACL." ::= { aclActiveEntry 13 } aclActiveRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the active ACL." ::= { aclActiveEntry 14 } aclActiveRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { aclActiveEntry 15 } aclActiveBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 5中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 16 } aclActiveBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 6中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 17 } aclActiveBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 7中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 18 } aclActiveBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 8中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 19 } aclActiveBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 9中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 20 } aclActiveBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 10中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 21 } aclActiveBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 11中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 22 } -- -- the mirror-to QOS group -- qosMirrorToTable OBJECT-TYPE SYNTAX SEQUENCE OF QosMirrorToEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror-to QOS entries. " ::= { gbnL2QACL 16 } qosMirrorToEntry OBJECT-TYPE SYNTAX QosMirrorToEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror-to QOS entries. " INDEX { qosMirrorToIndex } ::= { qosMirrorToTable 1 } QosMirrorToEntry ::= SEQUENCE { qosMirrorToIndex INTEGER, qosMirrorToUserGroupName OCTET STRING, qosMirrorToUserGroupSubitem INTEGER, qosMirrorToIpGroupName OCTET STRING, qosMirrorToIpGroupSubitem INTEGER, qosMirrorToLinkGroupName OCTET STRING, qosMirrorToLinkGroupSubitem INTEGER, qosMirrorToInterface INTEGER, qosMirrorToBlock0Priority INTEGER, qosMirrorToBlock1Priority INTEGER, qosMirrorToBlock2Priority INTEGER, qosMirrorToBlock3Priority INTEGER, qosMirrorToBlock4Priority INTEGER, qosMirrorToConfigSequence INTEGER, qosMirrorToRunning TruthValue, qosMirrorToRowStatus RowStatus, qosMirrorToBlock5Priority INTEGER, qosMirrorToBlock6Priority INTEGER, qosMirrorToBlock7Priority INTEGER, qosMirrorToBlock8Priority INTEGER, qosMirrorToBlock9Priority INTEGER, qosMirrorToBlock10Priority INTEGER, qosMirrorToBlock11Priority INTEGER } qosMirrorToIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each mirror-to QOS. " ::= { qosMirrorToEntry 1 } qosMirrorToUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS user group acl. " ::= { qosMirrorToEntry 2 } qosMirrorToUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS user group acl subitem. " ::= { qosMirrorToEntry 3 } qosMirrorToIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS ip group acl. " ::= { qosMirrorToEntry 4 } qosMirrorToIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS ip group acl subitem. " ::= { qosMirrorToEntry 5 } qosMirrorToLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS link group acl. " ::= { qosMirrorToEntry 6 } qosMirrorToLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS link group acl subitem. " ::= { qosMirrorToEntry 7 } qosMirrorToInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-write STATUS current DESCRIPTION "the mirror-to interface of the mirror-to QOS. " ::= { qosMirrorToEntry 8 } qosMirrorToBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 9 } qosMirrorToBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 10 } qosMirrorToBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 11 } qosMirrorToBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 12 } qosMirrorToBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 13 } qosMirrorToConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the mirror-to QOS." ::= { qosMirrorToEntry 14 } qosMirrorToRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the mirror-to QOS. " ::= { qosMirrorToEntry 15 } qosMirrorToRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosMirrorToEntry 16 } qosMirrorToBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 5中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 17 } qosMirrorToBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 18 } qosMirrorToBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 19 } qosMirrorToBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 20 } qosMirrorToBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 21 } qosMirrorToBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 22 } qosMirrorToBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 23 } -- -- the rate-limit QOS -- qosRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF QosRateLimitEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of rate-limit QOS entries. " ::= { gbnL2QACL 17 } qosRateLimitEntry OBJECT-TYPE SYNTAX QosRateLimitEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of rate-limit QOS entries. " INDEX { qosRateLimitIndex } ::= { qosRateLimitTable 1 } QosRateLimitEntry ::= SEQUENCE { qosRateLimitIndex INTEGER, qosRateLimitUserGroupName OCTET STRING, qosRateLimitUserGroupSubitem INTEGER, qosRateLimitIpGroupName OCTET STRING, qosRateLimitIpGroupSubitem INTEGER, qosRateLimitLinkGroupName OCTET STRING, qosRateLimitLinkGroupSubitem INTEGER, qosRateLimitIntf INTEGER, qosRateLimitTargetRate INTEGER, qosRateLimitExceedAction INTEGER, qosRateLimitDscpValue INTEGER, qosRateLimitBlock0Priority INTEGER, qosRateLimitBlock1Priority INTEGER, qosRateLimitBlock2Priority INTEGER, qosRateLimitBlock3Priority INTEGER, qosRateLimitBlock4Priority INTEGER, qosRateLimitConfigSequence INTEGER, qosRateLimitRunning TruthValue, qosRateLimitRowStatus RowStatus, qosRateLimitBlock5Priority INTEGER, qosRateLimitBlock6Priority INTEGER, qosRateLimitBlock7Priority INTEGER, qosRateLimitBlock8Priority INTEGER, qosRateLimitBlock9Priority INTEGER, qosRateLimitBlock10Priority INTEGER, qosRateLimitBlock11Priority INTEGER } qosRateLimitIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each rate-limit QOS. " ::= { qosRateLimitEntry 1 } qosRateLimitUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS user group acl. " ::= { qosRateLimitEntry 2 } qosRateLimitUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS user group acl subitem. " ::= { qosRateLimitEntry 3 } qosRateLimitIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS ip group acl. " ::= { qosRateLimitEntry 4 } qosRateLimitIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS ip group acl subitem. " ::= { qosRateLimitEntry 5 } qosRateLimitLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS link group acl. " ::= { qosRateLimitEntry 6 } qosRateLimitLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS link group acl subitem. " ::= { qosRateLimitEntry 7 } qosRateLimitIntf OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-write STATUS current DESCRIPTION "the target rate on this interface. " ::= { qosRateLimitEntry 8 } qosRateLimitTargetRate OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "the target rate of the rate-limit QOS. " ::= { qosRateLimitEntry 9 } qosRateLimitExceedAction OBJECT-TYPE SYNTAX INTEGER { drop(1), set-dscp-value(2) } ACCESS read-write STATUS current DESCRIPTION "the exceed action of the rate-limit QOS. " ::= { qosRateLimitEntry 10 } qosRateLimitDscpValue OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS current DESCRIPTION "the dscp value of the rate-limit QOS. " ::= { qosRateLimitEntry 11 } qosRateLimitBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 12 } qosRateLimitBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 13 } qosRateLimitBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 14 } qosRateLimitBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 15 } qosRateLimitBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 16 } qosRateLimitConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the rate-limit QOS." ::= { qosRateLimitEntry 17 } qosRateLimitRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the rate-limit QOS." ::= { qosRateLimitEntry 18 } qosRateLimitRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosRateLimitEntry 19 } qosRateLimitBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 20 } qosRateLimitBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 21 } qosRateLimitBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 22 } qosRateLimitBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 23 } qosRateLimitBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 24 } qosRateLimitBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 25 } qosRateLimitBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 26 } -- -- the traffic-priority QOS -- qosTrafficPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficPriorityEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-priority QOS entries. " ::= { gbnL2QACL 18 } qosTrafficPriorityEntry OBJECT-TYPE SYNTAX QosTrafficPriorityEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-priority QOS entries. " INDEX { qosTrafficPriorityIndex } ::= { qosTrafficPriorityTable 1 } QosTrafficPriorityEntry ::= SEQUENCE { qosTrafficPriorityIndex INTEGER, qosTrafficPriorityUserGroupName OCTET STRING, qosTrafficPriorityUserGroupSubitem INTEGER, qosTrafficPriorityIpGroupName OCTET STRING, qosTrafficPriorityIpGroupSubitem INTEGER, qosTrafficPriorityLinkGroupName OCTET STRING, qosTrafficPriorityLinkGroupSubitem INTEGER, qosTrafficPriorityDscp INTEGER, qosTrafficPriorityIpPrecedence INTEGER, qosTrafficPriorityCos INTEGER, qosTrafficPriorityLocalPrecedence INTEGER, qosTrafficPriorityBlock0Priority INTEGER, qosTrafficPriorityBlock1Priority INTEGER, qosTrafficPriorityBlock2Priority INTEGER, qosTrafficPriorityBlock3Priority INTEGER, qosTrafficPriorityBlock4Priority INTEGER, qosTrafficPriorityConfigSequence INTEGER, qosTrafficPriorityRunning TruthValue, qosTrafficPriorityRowStatus RowStatus, qosTrafficPriorityBlock5Priority INTEGER, qosTrafficPriorityBlock6Priority INTEGER, qosTrafficPriorityBlock7Priority INTEGER, qosTrafficPriorityBlock8Priority INTEGER, qosTrafficPriorityBlock9Priority INTEGER, qosTrafficPriorityBlock10Priority INTEGER, qosTrafficPriorityBlock11Priority INTEGER } qosTrafficPriorityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-priority QOS. " ::= { qosTrafficPriorityEntry 1 } qosTrafficPriorityUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS user group acl. " ::= { qosTrafficPriorityEntry 2 } qosTrafficPriorityUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS user group acl subitem. " ::= { qosTrafficPriorityEntry 3 } qosTrafficPriorityIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS ip group acl. " ::= { qosTrafficPriorityEntry 4 } qosTrafficPriorityIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS ip group acl subitem. " ::= { qosTrafficPriorityEntry 5 } qosTrafficPriorityLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS link group acl. " ::= { qosTrafficPriorityEntry 6 } qosTrafficPriorityLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS link group acl subitem. " ::= { qosTrafficPriorityEntry 7 } qosTrafficPriorityDscp OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS current DESCRIPTION "the DSCP of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 8 } qosTrafficPriorityIpPrecedence OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the IP precedence of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 9 } qosTrafficPriorityCos OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the COS of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 10 } qosTrafficPriorityLocalPrecedence OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the local precedence of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 11 } qosTrafficPriorityBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 12 } qosTrafficPriorityBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 13 } qosTrafficPriorityBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 14 } qosTrafficPriorityBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 15 } qosTrafficPriorityBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 16 } qosTrafficPriorityConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-priority QOS." ::= { qosTrafficPriorityEntry 17 } qosTrafficPriorityRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-priority QOS." ::= { qosTrafficPriorityEntry 18 } qosTrafficPriorityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficPriorityEntry 19 } qosTrafficPriorityBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 20 } qosTrafficPriorityBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 21 } qosTrafficPriorityBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 22 } qosTrafficPriorityBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 23 } qosTrafficPriorityBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 24 } qosTrafficPriorityBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 25 } qosTrafficPriorityBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 26 } -- -- the traffic redirect QOS -- qosTrafficRedirectTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficRedirectEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-redirect QOS entries. " ::= { gbnL2QACL 19 } qosTrafficRedirectEntry OBJECT-TYPE SYNTAX QosTrafficRedirectEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-redirect QOS entries. " INDEX { qosTrafficRedirectIndex } ::= { qosTrafficRedirectTable 1 } QosTrafficRedirectEntry ::= SEQUENCE { qosTrafficRedirectIndex INTEGER, qosTrafficRedirectUserGroupName OCTET STRING, qosTrafficRedirectUserGroupSubitem INTEGER, qosTrafficRedirectIpGroupName OCTET STRING, qosTrafficRedirectIpGroupSubitem INTEGER, qosTrafficRedirectLinkGroupName OCTET STRING, qosTrafficRedirectLinkGroupSubitem INTEGER, qosTrafficRedirectInterface INTEGER, qosTrafficRedirectBlock0Priority INTEGER, qosTrafficRedirectBlock1Priority INTEGER, qosTrafficRedirectBlock2Priority INTEGER, qosTrafficRedirectBlock3Priority INTEGER, qosTrafficRedirectBlock4Priority INTEGER, qosTrafficRedirectConfigSequence INTEGER, qosTrafficRedirectRunning TruthValue, qosTrafficRedirectRowStatus RowStatus, qosTrafficRedirectBlock5Priority INTEGER, qosTrafficRedirectBlock6Priority INTEGER, qosTrafficRedirectBlock7Priority INTEGER, qosTrafficRedirectBlock8Priority INTEGER, qosTrafficRedirectBlock9Priority INTEGER, qosTrafficRedirectBlock10Priority INTEGER, qosTrafficRedirectBlock11Priority INTEGER } qosTrafficRedirectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-redirect QOS. " ::= { qosTrafficRedirectEntry 1 } qosTrafficRedirectUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS user group acl. " ::= { qosTrafficRedirectEntry 2 } qosTrafficRedirectUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS user group acl subitem. " ::= { qosTrafficRedirectEntry 3 } qosTrafficRedirectIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS ip group acl. " ::= { qosTrafficRedirectEntry 4 } qosTrafficRedirectIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS ip group acl subitem. " ::= { qosTrafficRedirectEntry 5 } qosTrafficRedirectLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS link group acl. " ::= { qosTrafficRedirectEntry 6 } qosTrafficRedirectLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS link group acl subitem. " ::= { qosTrafficRedirectEntry 7 } qosTrafficRedirectInterface OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the redirect interface of the traffic-redirect QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficRedirectEntry 8 } qosTrafficRedirectBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 9 } qosTrafficRedirectBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 10 } qosTrafficRedirectBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 11 } qosTrafficRedirectBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 12 } qosTrafficRedirectBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 13 } qosTrafficRedirectConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-redirect QOS." ::= { qosTrafficRedirectEntry 14 } qosTrafficRedirectRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-redirect QOS." ::= { qosTrafficRedirectEntry 15 } qosTrafficRedirectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficRedirectEntry 16 } qosTrafficRedirectBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 17 } qosTrafficRedirectBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 18 } qosTrafficRedirectBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 19 } qosTrafficRedirectBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 20 } qosTrafficRedirectBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 21 } qosTrafficRedirectBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 22 } qosTrafficRedirectBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 23 } -- -- the traffic statistics QOS -- qosTrafficStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficStatisticsEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-statistics QOS entries. " ::= { gbnL2QACL 20 } qosTrafficStatisticsEntry OBJECT-TYPE SYNTAX QosTrafficStatisticsEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-statistics QOS entries. " INDEX { qosTrafficStatisticsIndex } ::= { qosTrafficStatisticsTable 1 } QosTrafficStatisticsEntry ::= SEQUENCE { qosTrafficStatisticsIndex INTEGER, qosTrafficStatisticsUserGroupName OCTET STRING, qosTrafficStatisticsUserGroupSubitem INTEGER, qosTrafficStatisticsIpGroupName OCTET STRING, qosTrafficStatisticsIpGroupSubitem INTEGER, qosTrafficStatisticsLinkGroupName OCTET STRING, qosTrafficStatisticsLinkGroupSubitem INTEGER, qosTrafficStatisticsBlock0Priority INTEGER, qosTrafficStatisticsBlock1Priority INTEGER, qosTrafficStatisticsBlock2Priority INTEGER, qosTrafficStatisticsBlock3Priority INTEGER, qosTrafficStatisticsBlock4Priority INTEGER, qosTrafficStatisticsConfigSequence INTEGER, qosTrafficStatisticsRunning TruthValue, qosTrafficStatisticsRowStatus RowStatus, qosTrafficStatisticsCounter Integer32, qosTrafficStatisticsBlock5Priority INTEGER, qosTrafficStatisticsBlock6Priority INTEGER, qosTrafficStatisticsBlock7Priority INTEGER, qosTrafficStatisticsBlock8Priority INTEGER, qosTrafficStatisticsBlock9Priority INTEGER, qosTrafficStatisticsBlock10Priority INTEGER, qosTrafficStatisticsBlock11Priority INTEGER } qosTrafficStatisticsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-statistics QOS. " ::= { qosTrafficStatisticsEntry 1 } qosTrafficStatisticsUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS user group acl. " ::= { qosTrafficStatisticsEntry 2 } qosTrafficStatisticsUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS user group acl subitem. " ::= { qosTrafficStatisticsEntry 3 } qosTrafficStatisticsIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS ip group acl. " ::= { qosTrafficStatisticsEntry 4 } qosTrafficStatisticsIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS ip group acl subitem. " ::= { qosTrafficStatisticsEntry 5 } qosTrafficStatisticsLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS link group acl. " ::= { qosTrafficStatisticsEntry 6 } qosTrafficStatisticsLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS link group acl subitem. " ::= { qosTrafficStatisticsEntry 7 } qosTrafficStatisticsBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 8 } qosTrafficStatisticsBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 9 } qosTrafficStatisticsBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 10 } qosTrafficStatisticsBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 11 } qosTrafficStatisticsBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 12 } qosTrafficStatisticsConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-statistics QOS." ::= { qosTrafficStatisticsEntry 13 } qosTrafficStatisticsRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-statistics QOS." ::= { qosTrafficStatisticsEntry 14 } qosTrafficStatisticsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficStatisticsEntry 15 } qosTrafficStatisticsCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of the counter." ::= { qosTrafficStatisticsEntry 16 } qosTrafficStatisticsBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 17 } qosTrafficStatisticsBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 18 } qosTrafficStatisticsBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 19 } qosTrafficStatisticsBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 20 } qosTrafficStatisticsBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 21 } qosTrafficStatisticsBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 22 } qosTrafficStatisticsBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 23 } -- -- the line-rate QOS -- qosLineRateTable OBJECT-TYPE SYNTAX SEQUENCE OF QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " ::= { gbnL2QACL 21 } qosLineRateEntry OBJECT-TYPE SYNTAX QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " INDEX { qosLineRateInterface } ::= { qosLineRateTable 1 } QosLineRateEntry ::= SEQUENCE { qosLineRateInterface INTEGER, qosLineRateTargetRate INTEGER, qosLineRateRowStatus RowStatus } qosLineRateInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the line rate interface. " ::= { qosLineRateEntry 1 } qosLineRateTargetRate OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "the target rate of the line-rate QOS. " ::= { qosLineRateEntry 2 } -- -- the traffic copy to cpu QOS -- qosTrafficCopyToCpuTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficCopyToCpuEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-copy-to-cpu QOS entries. " ::= { gbnL2QACL 22 } qosTrafficCopyToCpuEntry OBJECT-TYPE SYNTAX QosTrafficCopyToCpuEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-copy-to-cpu QOS entries. " INDEX { qosTrafficCopyToCpuIndex } ::= { qosTrafficCopyToCpuTable 1 } QosTrafficCopyToCpuEntry ::= SEQUENCE { qosTrafficCopyToCpuIndex INTEGER, qosTrafficCopyToCpuUserGroupName OCTET STRING, qosTrafficCopyToCpuUserGroupSubitem INTEGER, qosTrafficCopyToCpuIpGroupName OCTET STRING, qosTrafficCopyToCpuIpGroupSubitem INTEGER, qosTrafficCopyToCpuLinkGroupName OCTET STRING, qosTrafficCopyToCpuLinkGroupSubitem INTEGER, qosTrafficCopyToCpuBlock0Priority INTEGER, qosTrafficCopyToCpuBlock1Priority INTEGER, qosTrafficCopyToCpuBlock2Priority INTEGER, qosTrafficCopyToCpuBlock3Priority INTEGER, qosTrafficCopyToCpuBlock4Priority INTEGER, qosTrafficCopyToCpuConfigSequence INTEGER, qosTrafficCopyToCpuRunning TruthValue, qosTrafficCopyToCpuRowStatus RowStatus, qosTrafficCopyToCpuBlock5Priority INTEGER, qosTrafficCopyToCpuBlock6Priority INTEGER, qosTrafficCopyToCpuBlock7Priority INTEGER, qosTrafficCopyToCpuBlock8Priority INTEGER, qosTrafficCopyToCpuBlock9Priority INTEGER, qosTrafficCopyToCpuBlock10Priority INTEGER, qosTrafficCopyToCpuBlock11Priority INTEGER } qosTrafficCopyToCpuIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-copy-to-cpu QOS. " ::= { qosTrafficCopyToCpuEntry 1 } qosTrafficCopyToCpuUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS user group acl. " ::= { qosTrafficCopyToCpuEntry 2 } qosTrafficCopyToCpuUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS user group acl subitem. " ::= { qosTrafficCopyToCpuEntry 3 } qosTrafficCopyToCpuIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS ip group acl. " ::= { qosTrafficCopyToCpuEntry 4 } qosTrafficCopyToCpuIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS ip group acl subitem. " ::= { qosTrafficCopyToCpuEntry 5 } qosTrafficCopyToCpuLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS link group acl. " ::= { qosTrafficCopyToCpuEntry 6 } qosTrafficCopyToCpuLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS link group acl subitem. " ::= { qosTrafficCopyToCpuEntry 7 } qosTrafficCopyToCpuBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 8 } qosTrafficCopyToCpuBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 9 } qosTrafficCopyToCpuBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 10 } qosTrafficCopyToCpuBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 11 } qosTrafficCopyToCpuBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 12 } qosTrafficCopyToCpuConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-copy-to-cpu QOS." ::= { qosTrafficCopyToCpuEntry 13 } qosTrafficCopyToCpuRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-copy-to-cpu QOS." ::= { qosTrafficCopyToCpuEntry 14 } qosTrafficCopyToCpuRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficCopyToCpuEntry 15 } qosTrafficCopyToCpuBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 16 } qosTrafficCopyToCpuBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 17 } qosTrafficCopyToCpuBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 18 } qosTrafficCopyToCpuBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 19 } qosTrafficCopyToCpuBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 20 } qosTrafficCopyToCpuBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 21 } qosTrafficCopyToCpuBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 22 } -- -- the port-isolation configuration -- qaclAppPortIsolationGroup OBJECT IDENTIFIER ::= { gbnL2QACL 23 } qaclAppPortIsolationDownLinkPorts OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS current DESCRIPTION "qacl application port isolation down link portlist" -- QACL应用端口隔离的下行端口列表 -- ::= { qaclAppPortIsolationGroup 1 } -- -- the storm control -- stormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " ::= { gbnL2QACL 24 } stormControlEntry OBJECT-TYPE SYNTAX StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " INDEX { stormControlInterface, stormControlType } ::= { stormControlTable 1 } StormControlEntry ::= SEQUENCE { stormControlInterface INTEGER, stormControlType PacketFlowType, stormControlTargetRate INTEGER, stormControlRowStatus RowStatus } stormControlInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the storm control interface. " --风暴控制端口 ::= { stormControlEntry 1 } stormControlType OBJECT-TYPE SYNTAX PacketFlowType ACCESS read-only STATUS current DESCRIPTION "the pack flow type of the storm control. " --风暴控制报文流类型 ::= { stormControlEntry 2 } stormControlTargetRate OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS current DESCRIPTION "the target rate of the storm control. " --风暴控制目标速率 ::= { stormControlEntry 3 } stormControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status of the storm control" --风暴控制行状态 ::= { stormControlEntry 4 } -- -- the traffic rewrite vlan QOS -- qosTrafficRewriteVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficRewriteVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-rewrite-vlan QOS entries. " ::= { gbnL2QACL 25 } qosTrafficRewriteVlanEntry OBJECT-TYPE SYNTAX QosTrafficRewriteVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-rewrite-vlan QOS entries. " INDEX { qosTrafficRewriteVlanIndex } ::= { qosTrafficRewriteVlanTable 1 } QosTrafficRewriteVlanEntry ::= SEQUENCE { qosTrafficRewriteVlanIndex INTEGER, qosTrafficRewriteVlanUserGroupName OCTET STRING, qosTrafficRewriteVlanUserGroupSubitem INTEGER, qosTrafficRewriteVlanIpGroupName OCTET STRING, qosTrafficRewriteVlanIpGroupSubitem INTEGER, qosTrafficRewriteVlanLinkGroupName OCTET STRING, qosTrafficRewriteVlanLinkGroupSubitem INTEGER, qosTrafficRewriteVlanVid INTEGER, qosTrafficRewriteVlanBlock0Priority INTEGER, qosTrafficRewriteVlanBlock1Priority INTEGER, qosTrafficRewriteVlanBlock2Priority INTEGER, qosTrafficRewriteVlanBlock3Priority INTEGER, qosTrafficRewriteVlanBlock4Priority INTEGER, qosTrafficRewriteVlanConfigSequence INTEGER, qosTrafficRewriteVlanRunning TruthValue, qosTrafficRewriteVlanRowStatus RowStatus, qosTrafficRewriteVlanBlock5Priority INTEGER, qosTrafficRewriteVlanBlock6Priority INTEGER, qosTrafficRewriteVlanBlock7Priority INTEGER, qosTrafficRewriteVlanBlock8Priority INTEGER, qosTrafficRewriteVlanBlock9Priority INTEGER, qosTrafficRewriteVlanBlock10Priority INTEGER, qosTrafficRewriteVlanBlock11Priority INTEGER } qosTrafficRewriteVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-rewrite-vlan QOS. " ::= { qosTrafficRewriteVlanEntry 1 } qosTrafficRewriteVlanUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS user group acl. " ::= { qosTrafficRewriteVlanEntry 2 } qosTrafficRewriteVlanUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS user group acl subitem. " ::= { qosTrafficRewriteVlanEntry 3 } qosTrafficRewriteVlanIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS ip group acl. " ::= { qosTrafficRewriteVlanEntry 4 } qosTrafficRewriteVlanIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS ip group acl subitem. " ::= { qosTrafficRewriteVlanEntry 5 } qosTrafficRewriteVlanLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS link group acl. " ::= { qosTrafficRewriteVlanEntry 6 } qosTrafficRewriteVlanLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS link group acl subitem. " ::= { qosTrafficRewriteVlanEntry 7 } qosTrafficRewriteVlanVid OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the vlan ID of the traffic-rewrite-vlan QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficRewriteVlanEntry 8 } qosTrafficRewriteVlanBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 9 } qosTrafficRewriteVlanBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 10 } qosTrafficRewriteVlanBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 11 } qosTrafficRewriteVlanBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 12 } qosTrafficRewriteVlanBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 13 } qosTrafficRewriteVlanConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-rewrite-vlan QOS." ::= { qosTrafficRewriteVlanEntry 14 } qosTrafficRewriteVlanRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-rewrite-vlan QOS." ::= { qosTrafficRewriteVlanEntry 15 } qosTrafficRewriteVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficRewriteVlanEntry 16 } qosTrafficRewriteVlanBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 17 } qosTrafficRewriteVlanBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 18 } qosTrafficRewriteVlanBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 19 } qosTrafficRewriteVlanBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 20 } qosTrafficRewriteVlanBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 21 } qosTrafficRewriteVlanBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 22 } qosTrafficRewriteVlanBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." --报文重定向在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRewriteVlanEntry 23 } -- -- the traffic insert vlan QOS -- qosTrafficInsertVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficInsertVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-insert-vlan QOS entries. " ::= { gbnL2QACL 26 } qosTrafficInsertVlanEntry OBJECT-TYPE SYNTAX QosTrafficInsertVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-insert-vlan QOS entries. " INDEX { qosTrafficInsertVlanIndex } ::= { qosTrafficInsertVlanTable 1 } QosTrafficInsertVlanEntry ::= SEQUENCE { qosTrafficInsertVlanIndex INTEGER, qosTrafficInsertVlanUserGroupName OCTET STRING, qosTrafficInsertVlanUserGroupSubitem INTEGER, qosTrafficInsertVlanIpGroupName OCTET STRING, qosTrafficInsertVlanIpGroupSubitem INTEGER, qosTrafficInsertVlanLinkGroupName OCTET STRING, qosTrafficInsertVlanLinkGroupSubitem INTEGER, qosTrafficInsertVlanVid INTEGER, qosTrafficInsertVlanBlock0Priority INTEGER, qosTrafficInsertVlanBlock1Priority INTEGER, qosTrafficInsertVlanBlock2Priority INTEGER, qosTrafficInsertVlanBlock3Priority INTEGER, qosTrafficInsertVlanBlock4Priority INTEGER, qosTrafficInsertVlanConfigSequence INTEGER, qosTrafficInsertVlanRunning TruthValue, qosTrafficInsertVlanRowStatus RowStatus, qosTrafficInsertVlanBlock5Priority INTEGER, qosTrafficInsertVlanBlock6Priority INTEGER, qosTrafficInsertVlanBlock7Priority INTEGER, qosTrafficInsertVlanBlock8Priority INTEGER, qosTrafficInsertVlanBlock9Priority INTEGER, qosTrafficInsertVlanBlock10Priority INTEGER, qosTrafficInsertVlanBlock11Priority INTEGER } qosTrafficInsertVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-insert-vlan QOS. " ::= { qosTrafficInsertVlanEntry 1 } qosTrafficInsertVlanUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS user group acl. " ::= { qosTrafficInsertVlanEntry 2 } qosTrafficInsertVlanUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS user group acl subitem. " ::= { qosTrafficInsertVlanEntry 3 } qosTrafficInsertVlanIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS ip group acl. " ::= { qosTrafficInsertVlanEntry 4 } qosTrafficInsertVlanIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS ip group acl subitem. " ::= { qosTrafficInsertVlanEntry 5 } qosTrafficInsertVlanLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS link group acl. " ::= { qosTrafficInsertVlanEntry 6 } qosTrafficInsertVlanLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS link group acl subitem. " ::= { qosTrafficInsertVlanEntry 7 } qosTrafficInsertVlanVid OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the vlan ID of the traffic-insert-vlan QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficInsertVlanEntry 8 } qosTrafficInsertVlanBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 9 } qosTrafficInsertVlanBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 10 } qosTrafficInsertVlanBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 11 } qosTrafficInsertVlanBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 12 } qosTrafficInsertVlanBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 13 } qosTrafficInsertVlanConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-insert-vlan QOS." ::= { qosTrafficInsertVlanEntry 14 } qosTrafficInsertVlanRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-insert-vlan QOS." ::= { qosTrafficInsertVlanEntry 15 } qosTrafficInsertVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficInsertVlanEntry 16 } qosTrafficInsertVlanBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 17 } qosTrafficInsertVlanBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 18 } qosTrafficInsertVlanBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 19 } qosTrafficInsertVlanBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 20 } qosTrafficInsertVlanBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 21 } qosTrafficInsertVlanBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 22 } qosTrafficInsertVlanBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 23 } END