NSCRTV-EPON-PON-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType, AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType FROM NSCRTV-EPONEOC-EPON-MIB ponPortObjects FROM NSCRTV-EPONEOC-EPON-MIB; -------------------------------------------------------------------------------- -- ponPortObjects[PON端口属性管理项](1.3.6.1.4.1.17409.2.3.3) -------------------------------------------------------------------------------- ponPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF PonPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PON端口配置信息表" ::= { ponPortObjects 1 } ponPortInfoEntry OBJECT-TYPE SYNTAX PonPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { ponDeviceIndex, ponCardIndex, ponPortIndex} ::= { ponPortInfoTable 1 } PonPortInfoEntry ::= SEQUENCE { ponDeviceIndex INTEGER, ponCardIndex EponCardIndex, ponPortIndex EponPortIndex, ponPortType INTEGER, ponOperationStatus INTEGER, ponPortAdminStatus INTEGER, ponPortMaxOnuNumSupport INTEGER, ponPortUpOnuNum INTEGER, ponPortEncryptMode INTEGER, ponPortEncryptKeyExchangeTime INTEGER, ponPortIsolationEnable TruthValue, maxDsBandwidth INTEGER, actualDsBandwidthInUse INTEGER, remainDsBandwidth INTEGER, perfStats15minuteEnable TruthValue, perfStats24hourEnable TruthValue, ponPortMacAddrLearnMaxNum INTEGER, maxUsBandwidth INTEGER, actualUsBandwidthInUse INTEGER, remainUsBandwidth INTEGER } ponDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponPortInfoEntry 1 } ponCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { ponPortInfoEntry 2 } ponPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口索引号" ::= { ponPortInfoEntry 3 } ponPortType OBJECT-TYPE SYNTAX INTEGER { ge-epon(1), tenge-epon(2), gpon(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " PON端口类型" ::= { ponPortInfoEntry 4 } ponOperationStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 端口操作状态 up(1) - 该端口可以提供业务 down(2) - 该端口无法提供业务 testing(3) - 该端口处于测试状态，该状态下可能无法正常提供业务" ::= { ponPortInfoEntry 5 } ponPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 板卡管理状态 up(1) - 该端口允许提供业务 down(2) - 该端口禁止提供业务 testing(3) - 该端口处于测试状态，该状态下可能无法正常提供业务" ::= { ponPortInfoEntry 6 } ponPortMaxOnuNumSupport OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 支持最多ONU数量" ::= { ponPortInfoEntry 7 } ponPortUpOnuNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 在线ONU数量" ::= { ponPortInfoEntry 8 } ponPortEncryptMode OBJECT-TYPE SYNTAX INTEGER { aes128(1), ctcTripleChurning(2), other(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 加密模式" ::= { ponPortInfoEntry 9 } ponPortEncryptKeyExchangeTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " 密钥交换时间" ::= { ponPortInfoEntry 10 } ponPortIsolationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " PON端口隔离使能" ::= { ponPortInfoEntry 11 } maxDsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 最大下行带宽" ::= { ponPortInfoEntry 12 } actualDsBandwidthInUse OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 实际下行使用带宽" ::= { ponPortInfoEntry 13 } remainDsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 剩余下行使用带宽" ::= { ponPortInfoEntry 14 } perfStats15minuteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 15分钟性能统计使能" ::= { ponPortInfoEntry 15 } perfStats24hourEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 24小时性能统计使能" ::= { ponPortInfoEntry 16 } ponPortMacAddrLearnMaxNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " PON口mac地址学习最大数目 value 0 means no limit" ::= { ponPortInfoEntry 17 } maxUsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 最大上行带宽" ::= { ponPortInfoEntry 18 } actualUsBandwidthInUse OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 实际上行使用带宽" ::= { ponPortInfoEntry 19 } remainUsBandwidth OBJECT-TYPE SYNTAX INTEGER UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION " 剩余上行使用带宽" ::= { ponPortInfoEntry 20 } aclManagementGroup OBJECT-IDENTITY STATUS current DESCRIPTION " ACL管理" ::= { ponPortObjects 2 } aclListTable OBJECT-TYPE SYNTAX SEQUENCE OF AclListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL列表" ::= { aclManagementGroup 1 } aclListEntry OBJECT-TYPE SYNTAX AclListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclListIndex } ::= { aclListTable 1 } AclListEntry ::= SEQUENCE { aclListIndex INTEGER, aclDescription DisplayString, aclRuleList OCTET STRING, ruleRowStatus RowStatus } aclListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL表索引" ::= { aclListEntry 1 } aclDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION " ACL描述信息" ::= { aclListEntry 2 } aclRuleList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " ACL包括的规则列表 采用类似INTERNET比特顺序，从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0，bit1，...，bit7。 按照bit和OCTET由小到大的顺序，每个bit对应于aclRuleTable中的 一个aclRuleIndex。如果bit置位，表示该aclRuleIndex支持，否则不支持。 举例来说，如果规划了80个ACL rule，aclRuleIndex范围为1..80，用10个字节表示 aclRuleList列表，假设该aclList只支持ACL rule列表1,15,38，对应的aclRuleList可以 设置成0x80 02 00 00 04 00 00 00 00 00" ::= { aclListEntry 3 } ruleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 规则行状态" ::= { aclListEntry 4 } aclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL规则表" ::= { aclManagementGroup 2 } aclRuleEntry OBJECT-TYPE SYNTAX AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclRuleIndex } ::= { aclRuleTable 1 } AclRuleEntry ::= SEQUENCE { aclRuleIndex INTEGER, matchedSourseMac MacAddress, matchedDestinationMac MacAddress, matchedVlanId INTEGER, matchedEthernetType INTEGER, matchedSourseIP IpAddress, matchedDestinationIP IpAddress, matchedIpMessageType INTEGER, matchedDscp INTEGER, matchedSoursePort INTEGER, matchedDestinationPort INTEGER, aclRuleRowStatus RowStatus, matchedFieldSelection BITS, aclAction INTEGER, aclActionParameter OCTET STRING } aclRuleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL规则索引" ::= { aclRuleEntry 1 } matchedSourseMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源Mac" ::= { aclRuleEntry 2 } matchedDestinationMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的Mac" ::= { aclRuleEntry 3 } matchedVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的vlan id" ::= { aclRuleEntry 4 } matchedEthernetType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的以太网类型 It is presented in decimal value for heximal EtherType" ::= { aclRuleEntry 5 } matchedSourseIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源IP" ::= { aclRuleEntry 6 } matchedDestinationIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的IP" ::= { aclRuleEntry 7 } matchedIpMessageType OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的IP报文类型" ::= { aclRuleEntry 8 } matchedDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的dscp" ::= { aclRuleEntry 9 } matchedSoursePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的源端口" ::= { aclRuleEntry 10 } matchedDestinationPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " 匹配的目的端口" ::= { aclRuleEntry 11 } aclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 规则状态" ::= { aclRuleEntry 12 } matchedFieldSelection OBJECT-TYPE SYNTAX BITS { sourceMac(0), destinationMac(1), vlanId(2), etherType(3), sourceIp(4), destinationIp(5), ipProtocolType(6), dscp(7), sourceProtocolPort(8), destinationProtocolPort(9) } MAX-ACCESS read-create STATUS current DESCRIPTION " 选择的匹配域，可以多选" ::= { aclRuleEntry 13 } aclAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2), mark(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " ACL规则动作（permit、deny、标记等）" ::= { aclRuleEntry 14 } aclActionParameter OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " ACL规则动作参数。只对aclAction为mark(3)有效，对于aclAction其他值， 此对象禁止配置，get时返回NULL。 按照INTERNET顺序从左往右的方向排列，第一个为OCTET0，第n个为OCTET [n-1]。 OCTET 0 表示 MARK 类型。后面的OCTET 表示这种类型的MARK的目标值，这 是否这些OCTET的长度取决于MARK类型，比如对应于改MARK类型的参数的SYNTAX 为INTEGER，则需要4个字节，表示对应的数值。 MARK类型 目标值的SYNTAX 描述 ------------------------------------------------------------------- 0 Reserved 1 INTEGER (0..7) MARK 801.1p的值（外层VLAN） 2 INTEGER (1..4094) MARK VLAN ID（外层VLAN） 3 INTEGER (0..7) MARK TOS PRECEDENCE 4 INTEGER (0..63) MARK DSCP 5..255 Reserved 比如修改VLAN ID为100，对应的值为：02 00 00 00 64" ::= { aclRuleEntry 15 } portACLListTable OBJECT-TYPE SYNTAX SEQUENCE OF PortACLListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口ACL列表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of aclDeviceIndex shall be set to 0, /OLT SNI aclCardIndex, and aclPortIndex set to 0 indicates meaningless OLT onu ID - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to 0 indicates meaningless ONU UNI - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to the corresponding value 2. If the table is maintained in ONU device: aclDeviceIndex shall be set to 0 to indicate meaningless. aclCardIndex shall be set to corresponding slot. aclPortIndex shall be set to corresponding port. " ::= { aclManagementGroup 3 } portACLListEntry OBJECT-TYPE SYNTAX PortACLListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aclDeviceIndex, aclCardIndex, aclPortIndex, portAclListIndex } ::= { portACLListTable 1 } PortACLListEntry ::= SEQUENCE { aclDeviceIndex EponDeviceIndex, aclCardIndex EponCardIndex, aclPortIndex EponPortIndex, portAclListIndex INTEGER, aclPortDirection BITS, aclRowStatus RowStatus } aclDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT, set to corresponding PON port, SNI, or ONU For ONU, set to 0 " ::= { portACLListEntry 1 } aclCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT, set to 0, For ONU, set to corresponding slot " ::= { portACLListEntry 2 } aclPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号 For OLT, set to 0, For ONU, set to corresponding slot " ::= { portACLListEntry 3 } portAclListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口ACL表索引" ::= { portACLListEntry 4 } aclPortDirection OBJECT-TYPE SYNTAX BITS { ingress(0), egress(1) } MAX-ACCESS read-create STATUS current DESCRIPTION " ACL应用到出口或入口" ::= { portACLListEntry 5 } aclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " ACL应用状态" ::= { portACLListEntry 6 } ponBroadcastStormSuppressionTable OBJECT-TYPE SYNTAX SEQUENCE OF PonBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 广播风暴抑制表 注：若不支持端口级别的配置，则配置一个端口，同一板卡的所有端口的配置均生效" ::= { ponPortObjects 3 } ponBroadcastStormSuppressionEntry OBJECT-TYPE SYNTAX PonBroadcastStormSuppressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { bsDeviceIndex, bsCardIndex, bsPortIndex } ::= { ponBroadcastStormSuppressionTable 1 } PonBroadcastStormSuppressionEntry ::= SEQUENCE { bsDeviceIndex INTEGER, bsCardIndex EponCardIndex, bsPortIndex EponPortIndex, unicastStormEnable TruthValue, unicastStormInPacketRate INTEGER, unicastStormOutPacketRate INTEGER, multicastStormEnable TruthValue, multicastStormInPacketRate INTEGER, multicastStormOutPacketRate INTEGER, broadcastStormEnable TruthValue, broadcastStormInPacketRate INTEGER, broadcastStormOutPacketRate INTEGER } bsDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识" ::= { ponBroadcastStormSuppressionEntry 1 } bsCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { ponBroadcastStormSuppressionEntry 2 } bsPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口索引号" ::= { ponBroadcastStormSuppressionEntry 3 } unicastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 4 } unicastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 5 } unicastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 未知单播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 6 } multicastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 7 } multicastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 8 } multicastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 组播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 9 } broadcastStormEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制使能" ::= { ponBroadcastStormSuppressionEntry 10 } broadcastStormInPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制入口速率" ::= { ponBroadcastStormSuppressionEntry 11 } broadcastStormOutPacketRate OBJECT-TYPE SYNTAX INTEGER UNITS "pps" MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制出口速率" ::= { ponBroadcastStormSuppressionEntry 12 } -- PON OPM oltPonPortOpticalTransmissionPropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF oltPonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of oltPonPortOpticalTransmissionPropertyTable entries. " ::= { ponPortObjects 5 } oltPonPortOpticalTransmissionPropertyEntry OBJECT-TYPE SYNTAX oltPonPortOpticalTransmissionPropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The oltPonPortOpticalTransmissionPropertyEntry Information" INDEX { ponOpDeviceIndex,ponOpCardIndex,ponOpPortIndex } ::={ oltPonPortOpticalTransmissionPropertyTable 1 } oltPonPortOpticalTransmissionPropertyEntry ::= SEQUENCE { ponOpDeviceIndex INTEGER, ponOpCardIndex EponCardIndex, ponOpPortIndex EponPortIndex, PonOpmDiagnosisVcc INTEGER, PonOpmDiagnosisBias INTEGER, PonOpmDiagnosisTXPower INTEGER, PonOpmDiagnosisRXPower INTEGER } ponOpDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引 " ::= { oltPonPortOpticalTransmissionPropertyEntry 1 } ponOpCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引" ::= {oltPonPortOpticalTransmissionPropertyEntry 2 } ponOpPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引" ::= { oltPonPortOpticalTransmissionPropertyEntry 3 } PonOpmDiagnosisVcc OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "光模块电压" ::= { oltPonPortOpticalTransmissionPropertyEntry 4 } PonOpmDiagnosisBias OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "光模块偏置电流" ::= { oltPonPortOpticalTransmissionPropertyEntry 5 } PonOpmDiagnosisTXPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "光模块发送功率" ::= { oltPonPortOpticalTransmissionPropertyEntry 6 } PonOpmDiagnosisRXPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "光模块接收功率" ::= { oltPonPortOpticalTransmissionPropertyEntry 7 } onuLongEmitDetectEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF onuLongEmitDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of onuLongEmitDetectEntryTable entries. " ::= { ponPortObjects 6 } onuLongEmitDetectEntry OBJECT-TYPE SYNTAX onuLongEmitDetectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The onuLongEmitDetectEntry Information" INDEX { onuLongEmitDeviceIndex,onuLongEmitCardIndex,onuLongEmitPortIndex } ::={ onuLongEmitDetectEntryTable 1 } onuLongEmitDetectEntry ::= SEQUENCE { onuLongEmitDeviceIndex INTEGER, onuLongEmitCardIndex EponCardIndex, onuLongEmitPortIndex EponPortIndex, detectEnable INTEGER, } onuLongEmitDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "设备索引 " ::= { onuLongEmitDetectEntry 1 } onuLongEmitCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "板卡索引" ::= { onuLongEmitDetectEntry 2 } onuLongEmitPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "端口索引" ::= { onuLongEmitDetectEntry 3 } detectEnable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "检测开关 0：关闭 1：打开" ::= { onuLongEmitDetectEntry 4 } -- -- END of NSCRTV-EPON-PON-PORT-MIB -- END