-- ***************************************************************** -- FS-TRAFFIC-CTRL-MIB.mib: FS traffic control MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by FS.COM Inc.. -- All rights reserved. -- -- ***************************************************************** -- FS-TRAFFIC-CTRL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC IfIndex FROM FS-TC ifIndex FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB fsMgmt FROM FS-SMI; fsTrafficCtrlMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "FS.COM Inc.." CONTACT-INFO " Tel: 400-865-2852 E-mail: https://www.fs.com/live_chat_service_mail.html" DESCRIPTION "This module defines fs traffic control mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { fsMgmt 14} -- Percentage for statistic, etc. -- Percent ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer that is in the range of a percent value." SYNTAX INTEGER (1..100) fsTrafficCtrlMIBObjects OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 1 } fsPtTrafficCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF FSPtTrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "list of port-based traffic control configuration objects." ::= { fsTrafficCtrlMIBObjects 1 } fsPtTrafficCtrlEntry OBJECT-TYPE SYNTAX FSPtTrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains port-based traffic control configuration objects." INDEX { fsPtTrafficCtrlIfIndex } ::= { fsPtTrafficCtrlTable 1 } FSPtTrafficCtrlEntry ::= SEQUENCE { fsPtTrafficCtrlIfIndex IfIndex, fsPtProtectedPortStatus EnabledStatus, fsPtBroadcastStormControlStatus EnabledStatus, fsPtMulticastStormControlStatus EnabledStatus, fsPtUnicastStormControlStatus EnabledStatus, fsPtBroadcastStormControlLevel Percent, fsPtMulticastStormControlLevel Percent, fsPtUnicastStormControlLevel Percent } fsPtTrafficCtrlIfIndex OBJECT-TYPE SYNTAX IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { fsPtTrafficCtrlEntry 1 } fsPtProtectedPortStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Some applications require that no traffic be forwarded by the Layer 2 protocol between ports on the same switch. In such an environment, there is no exchange of unicast, broadcast, or multicast traffic betweenports on the switch, and traffic between ports on the same switch is forwarded through a Layer 3 device such as a router. To meet this requirement, you can configure ports as protected ports(Set this value to enabled).Protected ports do not forward any traffic to protected ports on the same switch. This means that all traffic passing between protected ports¡ªunicast, broadcast, and multicast¡ªmust be forwarded through a Layer 3 device. Protected ports can forward any type of traffic to nonprotected ports, and they forward as usual to all ports on other switches. Dynamically learnt addresses are not retained if the switch is reloaded." DEFVAL { disabled } ::= { fsPtTrafficCtrlEntry 2 } fsPtBroadcastStormControlStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "the broadcast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attribute apply physical port and aggreate port" ::= { fsPtTrafficCtrlEntry 3 } fsPtMulticastStormControlStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "the multicast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attribute apply physical port and aggreate port" ::= { fsPtTrafficCtrlEntry 4 } fsPtUnicastStormControlStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "the unknown unicast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attribute apply physical port and aggreate port" ::= { fsPtTrafficCtrlEntry 5 } fsPtBroadcastStormControlLevel OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of maximal traffic allowed to go through the broadcast packets in the interface bandwidth. When the traffic of broadcast packets exceeds the percentage, the broadcast packets correspondent with the exceeded traffic will be discarded. It takes effect only when the broadcast storm control function is enabled on the interface." DEFVAL { 10 } ::= { fsPtTrafficCtrlEntry 6 } fsPtMulticastStormControlLevel OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of maximal traffic allowed to go through the multicast packets in the interface bandwidth. When the traffic of multicast packets exceeds the percentage, the multicast packets correspondent with the exceeded traffic will be discarded. It takes effect only when the broadcast storm control function is enabled on the interface." DEFVAL { 10 } ::= { fsPtTrafficCtrlEntry 7 } fsPtUnicastStormControlLevel OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of maximal traffic allowed to go through the unknown unicast packets in the interface bandwidth. When the traffic of unknown unicast packets exceeds the percentage, the unknown unicast packets correspondent with the exceeded traffic will be discarded. It takes effect only when the broadcast storm control function is enabled on the interface." DEFVAL { 10 } ::= { fsPtTrafficCtrlEntry 8 } fsPtTrafficCtrlTraps OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 2 } stormViolationAlarmType OBJECT-TYPE SYNTAX INTEGER{ unknown(1), broadcast(2), mutlicast(3), unicast(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of storm of interface" ::= { fsPtTrafficCtrlTraps 1 } stormViolationAlarm NOTIFICATION-TYPE OBJECTS {ifIndex, stormViolationAlarmType} STATUS current DESCRIPTION "while the storm threshold has been set, if more broadcast is send to the port, then this trap will be sent." ::= { fsPtTrafficCtrlTraps 2 } fsPtTrafficCtrlMIBConformance OBJECT IDENTIFIER ::= { fsTrafficCtrlMIB 3 } fsPtTrafficCtrlMIBCompliances OBJECT IDENTIFIER ::= { fsPtTrafficCtrlMIBConformance 1 } fsPtTrafficCtrlMIBGroups OBJECT IDENTIFIER ::= { fsPtTrafficCtrlMIBConformance 2 } -- compliance statements fsPtTrafficCtrlMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the FS IfConfig MIB" MODULE -- this module MANDATORY-GROUPS { fsPtTrafficCtrlMIBGroup } ::= { fsPtTrafficCtrlMIBCompliances 1 } -- units of conformance fsPtTrafficCtrlMIBGroup OBJECT-GROUP OBJECTS { fsPtTrafficCtrlIfIndex, fsPtProtectedPortStatus, fsPtBroadcastStormControlStatus, fsPtMulticastStormControlStatus, fsPtUnicastStormControlStatus, fsPtBroadcastStormControlLevel, fsPtMulticastStormControlLevel, fsPtUnicastStormControlLevel } STATUS current DESCRIPTION "A collection of objects providing port traffic control configure." ::= { fsPtTrafficCtrlMIBGroups 1 } END