FS-NMS-PTN-ALARM DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,INTEGER,
    Integer32, Unsigned32                       FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                          FROM SNMPv2-CONF
    nmsPTNGroup                                 FROM FS-NMS-SMI
    DateAndTime, TruthValue						FROM SNMPv2-TC;

  
  
    nmsPtnAlarm         OBJECT IDENTIFIER ::= { nmsPTNGroup 1 }
   	ptnNotifications OBJECT IDENTIFIER ::= { nmsPtnAlarm 1 }
	ptnAlarmNotification NOTIFICATION-TYPE
	OBJECTS { 
		ptnTrapCode,
		prnTrapType,
		ptnTrapInstance,
		ptnTrapSeverity, 
		ptnTrapAdditionalText, 
		ptnTrapOccurTime, 
		ptnTrapSequenceNumber
	}
	STATUS current
	DESCRIPTION
	"Alarm TRAP definition"
	::= { ptnNotifications 1 }    
	
	ptnEventNotification NOTIFICATION-TYPE
	OBJECTS {    
		ptnTrapCode,   
		prnTrapType,
		ptnTrapInstance,		
		ptnTrapAdditionalText,
		ptnTrapOccurTime,       
		ptnTrapSequenceNumber
	}
	STATUS current
	DESCRIPTION
	"Event TRAP definition"
	::= { ptnNotifications 2 }    
	
	ptnTrapObjects OBJECT IDENTIFIER ::= { nmsPtnAlarm 2 }     
	                        
	ptnTrapCode OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	""
	::= { ptnTrapObjects 1 }     
	
	ptnTrapType OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	""
	::= { ptnTrapObjects 2 }

                        
	ptnTrapInstance OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	"Alarm instance, indicates the detailed managed object, which
	detects faults.	"
	::= { ptnTrapObjects 3 }    
	                            
	ptnTrapSeverity OBJECT-TYPE
	SYNTAX Unsigned32  
	{
		critical(1),
		major(2),
		minor(3),
		warning(4),
		info(5),
		clear(6)
	}

	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	"
	告警严重程度。"
	::= { ptnTrapObjects 4 }
                           
	ptnTrapAdditionalText OBJECT-TYPE
	SYNTAX OCTET STRING ( SIZE (0..256) )
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	"Additional info to the alarm, for further desciption of the
	alarm. The format of it shall be related to each kind alarm
	defined in alarm reference table"

	::= { ptnTrapObjects 5 }  
	
	ptnTrapOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	"
	告警产生时间。"
	::= { ptnTrapObjects 6 }   
	
	ptnTrapSequenceNumber OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS accessible-for-notify
	STATUS current
	DESCRIPTION
	""
	::= { ptnTrapObjects 7 }             
	
	activeAlarmTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ActiveAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Active alarm table"
	::= { nmsPtnAlarm 3 }   
	
	activeAlarmEntry OBJECT-TYPE
	SYNTAX ActiveAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	""
	INDEX { activeAlarmSeqNum, activeAlarmRaisingNumber }
	::= { activeAlarmTable 1 }   
	
	ActiveAlarmEntry ::=
	SEQUENCE {
		activeAlarmCode	 	Unsigned32,    
		activeAlarmType	 	Unsigned32,
		activeAlarmInstance	Unsigned32,
		activeAlarmSeverity Unsigned32,    
		activeAlarmAdditionalText	OCTET STRING,
		activeAlarmLastOccurTime	DateAndTime,    
		activeAlarmSeqNum 			Unsigned32,
		activeAlarmRaisingNumber	Unsigned32,
		activeAlarmFirstOccurTime	DateAndTime,		
		activeAlarmRepeats			Counter32,
		activeAlarmConfirm			TruthValue	
	}
	
	activeAlarmCode OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警代码，见附录B
	"
	::= { activeAlarmEntry 1 }  
	          
	activeAlarmType OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Alarm activeAlarmType, indicates the detailed managed object"
	::= { activeAlarmEntry 2 }  
	          
	activeAlarmInstance OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Alarm instance, indicates the detailed managed object"
	::= { activeAlarmEntry 3 }   
	
	activeAlarmSeverity OBJECT-TYPE
                       
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警严重程度。"
	::= { activeAlarmEntry 4 } 
	   
 	activeAlarmAdditionalText OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (0..256))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Additional info to the alarm, for further desciption of the
	alarm. The format of it shall be related to each kind alarm
	defined in alarm reference table"
	::= { activeAlarmEntry 5 }
 	
	activeAlarmLastOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	The time stamp when alarm occurs, where the alarm is duplicated
	with existed active alarm entry, and it was the latest one. "
	::= { activeAlarmEntry 6 }    
                             

	activeAlarmSeqNum OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Alarm sequence number
	The definition refered to the description of activeAlarmTable"
	::= { activeAlarmEntry 7 }  

	
	activeAlarmRaisingNumber OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Alarm raising number.
	The definition refered to the description of activeAlarmTable"
	::= { activeAlarmEntry 8 }       
	
	activeAlarmFirstOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警初始发生的时间
	The time stamp when alarm occurs, which triggered to create the
	active alarm entry."
	::= { activeAlarmEntry 9 }       
	
	activeAlarmRepeats OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	
	"Number of repeated alarms for this active alarm entry"
	::= { activeAlarmEntry 10 }     
	
	activeAlarmConfirm OBJECT-TYPE
	SYNTAX TruthValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"
	告警确认
	Node shall not clear an active alarm, upon the confirmation
	of the active alarm, but just mark an acknowledged status.
	An alarm will only be cleared once the clear condition hits."
	::= { activeAlarmEntry 11 }     
	
	historyAlarmTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HistoryAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	""
	::= { nmsPtnAlarm 4 }
                          
	historyAlarmEntry OBJECT-TYPE
	SYNTAX HistoryAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	""
	INDEX { historyAlarmSeqNum, historyAlarmRaisingNumber }
	::= { historyAlarmTable 1 }   
	
	HistoryAlarmEntry ::=
	SEQUENCE {
		historyAlarmSeqNum		Unsigned32,
		historyAlarmCode		Unsigned32,
		historyAlarmType		Unsigned32,
		historyAlarmInstance		Unsigned32,
		historyAlarmSeverity		Unsigned32,
		historyAlarmRaisingNumber		Unsigned32,
		historyAlarmFirstOccurTime		DateAndTime,
		historyAlarmLastOccurTime		DateAndTime,
		historyAlarmRepeats		Counter32,
		historyAlarmCorrelationId		Unsigned32,
		historyAlarmAdditionalText		OCTET STRING,
		historyAlarmClearTime		DateAndTime
	}       
	
	historyAlarmSeqNum OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Alarm sequence number
	
	The definition refered to the description of historyAlarmTable"
	::= { historyAlarmEntry 1 }        
		
	historyAlarmCode OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警代码，见附录B
	"
	::= { historyAlarmEntry 2 }    
		historyAlarmType OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Alarm historyAlarmType, indicates the detailed managed object"
	::= { historyAlarmEntry 3 }   

	historyAlarmInstance OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Alarm instance, indicates the detailed managed object"
	::= { historyAlarmEntry 4 }   
		
	historyAlarmSeverity OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警严重程度。"
	::= { historyAlarmEntry 5 }   
	
	historyAlarmRaisingNumber OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Alarm raising number.
	The definition refered to the description of historyAlarmTable"
	::= { historyAlarmEntry 6 }    
	
	historyAlarmFirstOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	告警初始发生的时间
	The time stamp when alarm occurs, which triggered to create the
	history alarm entry."
	::= { historyAlarmEntry 7 }      
	
	historyAlarmLastOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	The time stamp when alarm occurs, where the alarm is duplicated
	with existed history alarm entry, and it was the latest one. "
	::= { historyAlarmEntry 8 }      
	
	historyAlarmRepeats OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Number of repeated alarms for this history alarm entry"
	::= { historyAlarmEntry 9 }     
	
	historyAlarmCorrelationId OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"It is the corresponding sequence ID of the alarm that to
	be cleared. "
	::= { historyAlarmEntry 10 }     
	
	historyAlarmAdditionalText OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (0..256))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Additional info to the alarm, for further desciption of the
	alarm. The format of it shall be related to each kind alarm
	defined in alarm reference table"
	::= { historyAlarmEntry 11 }

	historyAlarmClearTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Define when the alarm was cleared"
	::= { historyAlarmEntry 12 }    
	
	eventLogTable OBJECT-TYPE
	SYNTAX SEQUENCE OF EventLogEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	""
	::= { nmsPtnAlarm 5 }        
	
	eventLogEntry OBJECT-TYPE
	SYNTAX EventLogEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	""
	INDEX { eventSeqNum }
	::= { eventLogTable 1 }   
		
	EventLogEntry ::=
	SEQUENCE {
		eventSeqNum		Unsigned32,
		eventCode		Unsigned32,   
		eventType		Unsigned32,
	    eventInstance		Unsigned32, 
	    eventSeverity		Unsigned32,
		eventOccurTime		DateAndTime,
		eventAdditionalText		OCTET STRING
	}        
	
	eventSeqNum OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"Event sequence number
	The definition refered to the description of eponTrapSequenceNumber"
	::= { eventLogEntry 1 }   
	
	eventCode OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	事件代码，见附录B
	"
	::= { eventLogEntry 2 }  
	eventType OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	事件代码，见附录B
	"
	::= { eventLogEntry 3 }  
	
	eventInstance OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Event instance, indicates the detailed managed object"
	::= { eventLogEntry 4 }     
	eventSeverity OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	事件代码，见附录B
	"
	::= { eventLogEntry 5 }  

	eventOccurTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"
	The time stamp when event occurs"
	
	::= { eventLogEntry 6 }       
	
	eventAdditionalText OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (0..256))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Additional info to the event, for further desciption of the
	event. The format of it shall be related to each kind event
	defined in event reference table"
	::= { eventLogEntry 7 }

	
	
END