-- -- ***************************************************************** -- FS-MPLSOAM-MIB.mib: FS MPLSOAM MIB file -- -- MAY 2011, HongPeiYang -- -- Copyright (c) 2011 by FS.COM Inc.. -- All rights reserved. -- -- ***************************************************************** -- FS-MPLSOAM-MIB DEFINITIONS ::= BEGIN IMPORTS fsMgmt FROM FS-SMI IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, TimeStamp, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.12.7 -- January 04, 2011 at 13:27 GMT -- 1.3.6.1.4.1.2011.5.12.7 fsMplsOam MODULE-IDENTITY LAST-UPDATED "201101041327Z" -- January 04, 2011 at 13:27 GMT ORGANIZATION "FS.COM Inc.." CONTACT-INFO " Tel: 400-865-2852 E-mail: https://www.fs.com/live_chat_service_mail.html" DESCRIPTION "Copyright (C) FS Networks. This MIB module contains managed object definitions for the Operation, Administration and Maintenance (OAM) as in [Y.1711]. The MPLS OAM is Operation Administration and Maintenance mechanism for MPLS network." ::= { fsMgmt 93 } -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.12.7.1 -- 1.3.6.1.4.1.2011.5.12.7.1 fsMplsOamPs OBJECT IDENTIFIER ::= { fsMplsOam 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1 fsMplsOamObjects OBJECT IDENTIFIER ::= { fsMplsOamPs 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.1 fsMplsOamCapability OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Whether OAM is enabled globally. 1: enable; 0: disable; The default value is disabled globally." ::= { fsMplsOamObjects 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.1.2 fsMplsOamIgrTable OBJECT-TYPE SYNTAX SEQUENCE OF FSMplsOamIgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP(or te tunnel)." ::= { fsMplsOamObjects 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 fsMplsOamIgrEntry OBJECT-TYPE SYNTAX FSMplsOamIgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by fsMplsOamIgrIndex, which uniquely identifies a single LSP(or te tunnel)." INDEX { fsMplsOamIgrIndex } ::= { fsMplsOamIgrTable 1 } FSMplsOamIgrEntry ::= SEQUENCE { fsMplsOamIgrIndex Unsigned32, fsMplsOamIgrLspName OCTET STRING, fsMplsOamIgrLspId Integer32, fsMplsOamIgrDetType INTEGER, fsMplsOamIgrDetFreq INTEGER, fsMplsOamIgrRevType INTEGER, fsMplsOamIgrRevLspName OCTET STRING, fsMplsOamIgrEnable INTEGER, fsMplsOamIgrValid Integer32, fsMplsOamIgrAvaState Integer32, fsMplsOamIgrDefectType Integer32, fsMplsOamIgrRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 fsMplsOamIgrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the ingress table." ::= { fsMplsOamIgrEntry 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 fsMplsOamIgrLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of an LSP(or te tunnel)." ::= { fsMplsOamIgrEntry 2 } fsMplsOamIgrLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of an LSP." ::= { fsMplsOamIgrEntry 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 fsMplsOamIgrDetType OBJECT-TYPE SYNTAX INTEGER { cv(1), ffd(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The OAM defect detection function is based on the periodic transmission of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet carries a unique TTSI (Trail Termination Source Identifier), which is composed of the source LSR identifier, and the LSP identifier. 1: CV; 2: FFD." ::= { fsMplsOamIgrEntry 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 fsMplsOamIgrDetFreq OBJECT-TYPE SYNTAX INTEGER { cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1s(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms." ::= { fsMplsOamIgrEntry 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 fsMplsOamIgrRevType OBJECT-TYPE SYNTAX INTEGER { private(1), share(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's LSR sink point.BDI and loopback transactions use a return path. A return path could be: 1: A dedicated return LSP; 2: A shared return LSP, which is shared between many forward LSPs." ::= { fsMplsOamIgrEntry 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 fsMplsOamIgrRevLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a return LSP." ::= { fsMplsOamIgrEntry 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 fsMplsOamIgrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The detection of OAM is enabled/disabled on the ingress of an LSP. 0: The OAM detection is disabled on the ingress; 1: The OAM detection is enabled on the ingress." ::= { fsMplsOamIgrEntry 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 fsMplsOamIgrValid OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "0: stop detection of OAM; 1: start detection of OAM." ::= { fsMplsOamIgrEntry 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.16 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 fsMplsOamIgrAvaState OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LSP Timer (T3) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after first exiting the LSP defect state. 0: available state; 1: unavailable state." ::= { fsMplsOamIgrEntry 10 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.17 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 fsMplsOamIgrDefectType OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer maintenance entity defect: 0: no defect; 1: dServer, Any server layer defect arising below the MPLS layer network; 2: dPeerMe, Any peer maintenance entity defect arising outside the MPLS subnetwork; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Excess rate of CV/FFD defect; 7: dUnknown, Unknown defect in the MPLS network." ::= { fsMplsOamIgrEntry 11 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.18 -- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 fsMplsOamIgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to create and delete a row in this table." ::= { fsMplsOamIgrEntry 12 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.3 fsMplsOamEgrTable OBJECT-TYPE SYNTAX SEQUENCE OF FSMplsOamEgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP(or te tunnel)." ::= { fsMplsOamObjects 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1 fsMplsOamEgrEntry OBJECT-TYPE SYNTAX FSMplsOamEgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by fsMplsOamEgrIndex, which uniquely identifies a single LSP(or te tunnel)." INDEX { fsMplsOamEgrIndex } ::= { fsMplsOamEgrTable 1 } FSMplsOamEgrEntry ::= SEQUENCE { fsMplsOamEgrIndex Unsigned32, fsMplsOamEgrLspName OCTET STRING, fsMplsOamEgrLsrId IpAddress, fsMplsOamEgrLspId Integer32, fsMplsOamEgrDetType INTEGER, fsMplsOamEgrDetFreq INTEGER, fsMplsOamEgrRevType INTEGER, fsMplsOamEgrRevLspName OCTET STRING, fsMplsOamEgrAutoEn INTEGER, fsMplsOamEgrAutoOvertime Integer32, fsMplsOamEgrBDIFreq INTEGER, fsMplsOamEgrEnable INTEGER, fsMplsOamEgrValid INTEGER, fsMplsOamEgrAvaState Integer32, fsMplsOamEgrDefectType Integer32, fsMplsOamEgrRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1 fsMplsOamEgrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the egress table." ::= { fsMplsOamEgrEntry 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2 fsMplsOamEgrLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of static LSP at egress." ::= { fsMplsOamEgrEntry 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3 fsMplsOamEgrLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Ingress LSR ID of an LSP." ::= { fsMplsOamEgrEntry 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4 fsMplsOamEgrLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of an LSP." ::= { fsMplsOamEgrEntry 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5 fsMplsOamEgrDetType OBJECT-TYPE SYNTAX INTEGER { adaptability(0), cv(1), ffd(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "0: adaptability; 1: CV; 2: FFD." ::= { fsMplsOamEgrEntry 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6 fsMplsOamEgrDetFreq OBJECT-TYPE SYNTAX INTEGER{ cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4), invalid6(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms; 5: invalid." ::= { fsMplsOamEgrEntry 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7 fsMplsOamEgrRevType OBJECT-TYPE SYNTAX INTEGER { private(0), share(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at the downstream LSP's LSR sink point.BDI and loopback transactions use a return path. A return path could be: 1: A dedicated return LSP; 2: A shared return LSP, which is shared between many forward LSPs." ::= { fsMplsOamEgrEntry 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.8 -- fsMplsOamEgrRevTunnName OBJECT-TYPE fsMplsOamEgrRevLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a return LSP." ::= { fsMplsOamEgrEntry 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.9 fsMplsOamEgrAutoEn OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptability is enabled/disabled. 0: disable; 1: enable." ::= { fsMplsOamEgrEntry 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.10 fsMplsOamEgrAutoOvertime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The wait-time of adaptability." ::= { fsMplsOamEgrEntry 10 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.11 fsMplsOamEgrBDIFreq OBJECT-TYPE SYNTAX INTEGER { cv1000ms(0), ffd50ms2(1), ffd100ms3(2), ffd200ms4(3), ffd500ms5(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms." ::= { fsMplsOamEgrEntry 11 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.12 fsMplsOamEgrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The detection of OAM is enabled/disabled on the egress of an LSP. 0: The OAM detection is disabled on the egress; 1: The OAM detection is enabled on the egress." ::= { fsMplsOamEgrEntry 12 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.13 fsMplsOamEgrValid OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "1: stop detection of OAM; 2: start detection of OAM." ::= { fsMplsOamEgrEntry 13 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.14 fsMplsOamEgrAvaState OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect State. first exists. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state 0: available state; 1: unavailable state." ::= { fsMplsOamEgrEntry 14 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.15 fsMplsOamEgrDefectType OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer maintenance entity defect: 0: no defect; 1: dServer, Any server layer defect arising below the MPLS layer network; 2: dPeerMe, Any peer maintenance entity defect arising outside the MPLS subnetwork; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Excess rate of CV/FFD defect; 7: dUnknown, Unknown defect in the MPLS network." ::= { fsMplsOamEgrEntry 15 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.16 fsMplsOamEgrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to create and delete a row in this table." ::= { fsMplsOamEgrEntry 16 } -- 1.3.6.1.4.1.2011.5.12.7.1.1.5 fsMplsOamTrapOpen OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "0: disable 1: enable" ::= { fsMplsOamObjects 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.3 -- 1.3.6.1.4.1.2011.5.12.7.1.2 fsMplsOamNotifications OBJECT IDENTIFIER ::= { fsMplsOamPs 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.1 -- 1.3.6.1.4.1.2011.5.12.7.1.2.1 fsMplsOamIgrLSPOutDefect NOTIFICATION-TYPE OBJECTS { fsMplsOamIgrIndex, fsMplsOamIgrLspName, fsMplsOamIgrAvaState, fsMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP exits defect state at the LSP ingress." ::= { fsMplsOamNotifications 1 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.2 -- 1.3.6.1.4.1.2011.5.12.7.1.2.2 fsMplsOamIgrLSPInDefect NOTIFICATION-TYPE OBJECTS { fsMplsOamIgrIndex, fsMplsOamIgrLspName, fsMplsOamIgrAvaState, fsMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters defect state at the LSP ingress." ::= { fsMplsOamNotifications 2 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.3 -- 1.3.6.1.4.1.2011.5.12.7.1.2.3 fsMplsOamIgrLSPAva NOTIFICATION-TYPE OBJECTS { fsMplsOamIgrIndex, fsMplsOamIgrLspName, fsMplsOamIgrAvaState, fsMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters available state at the LSP ingress." ::= { fsMplsOamNotifications 3 } -- 1.3.6.1.4.1.2011.5.12.7.1.3.4 -- 1.3.6.1.4.1.2011.5.12.7.1.2.4 fsMplsOamIgrLSPUnAva NOTIFICATION-TYPE OBJECTS { fsMplsOamIgrIndex, fsMplsOamIgrLspName, fsMplsOamIgrAvaState, fsMplsOamIgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters unavailable state at the LSP ingress." ::= { fsMplsOamNotifications 4 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.5 fsMplsOamEgrLSPOutDefect NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrAvaState, fsMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP exits defect state at the LSP egress." ::= { fsMplsOamNotifications 5 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.6 fsMplsOamEgrLSPInDefect NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrAvaState, fsMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters defect state at the LSP egress." ::= { fsMplsOamNotifications 6 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.7 fsMplsOamEgrLSPAva NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrAvaState, fsMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters available state at the LSP egress." ::= { fsMplsOamNotifications 7 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.8 fsMplsOamEgrLSPUnAva NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrAvaState, fsMplsOamEgrDefectType } STATUS current DESCRIPTION "This notification is generated when the LSP enters unavailable state at the LSP egress." ::= { fsMplsOamNotifications 8 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.9 fsMplsOamEgrFirstPkt NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrDetType, fsMplsOamEgrDetFreq } STATUS current DESCRIPTION "If adaptability is enabled, this notification is generated when the LSP egress receives the first CV/FFD packet." ::= { fsMplsOamNotifications 9 } -- 1.3.6.1.4.1.2011.5.12.7.1.2.10 fsMplsOamEgrAutoProFDI NOTIFICATION-TYPE OBJECTS { fsMplsOamEgrIndex, fsMplsOamEgrLspName, fsMplsOamEgrLsrId, fsMplsOamEgrLspId, fsMplsOamEgrEnable } STATUS current DESCRIPTION "The FDI is sent downstream from the upstream node in an LSP to inform the downstream end of an LSP of a upstream defect. It is also generated when the adaptability is enabled." ::= { fsMplsOamNotifications 10 } fsMplsPsObjects OBJECT IDENTIFIER ::= { fsMplsOamPs 3 } fsMplsPsTable OBJECT-TYPE SYNTAX SEQUENCE OF FSMplsPsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LSP protection group(or te tunnel protection group)." ::= { fsMplsPsObjects 1 } fsMplsPsEntry OBJECT-TYPE SYNTAX FSMplsPsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information for configuring and monitoring LSP protection group(or te tunnel protection group). It is indexed by fsMplsPsIndex, which uniquely identifies a single LSP protection group(or te tunnel protection group)." INDEX { fsMplsPsIndex } ::= { fsMplsPsTable 1 } FSMplsPsEntry ::= SEQUENCE { fsMplsPsIndex Unsigned32, fsMplsPsGroupName OCTET STRING, fsMplsPsType Integer32, fsMplsPsWorkLspName OCTET STRING, fsMplsPsWorkLspId Integer32, fsMplsPsProtectLspName OCTET STRING, fsMplsPsProtectLspId Integer32, fsMplsPsRevertiveMode Integer32, fsMplsPsWTR Integer32, fsMplsPsHoldOff Integer32, fsMplsPsSwitchCondition Integer32, fsMplsPsWorkLspState Integer32, fsMplsPsProtLspState Integer32, fsMplsPsSwitchResult Integer32, fsMplsPsRowStatus RowStatus } fsMplsPsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a unique index in the protection group table." ::= { fsMplsPsEntry 1 } fsMplsPsGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The protection group name." ::= { fsMplsPsEntry 2 } fsMplsPsType OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type, or a packet 1+1 type. 1. In the 1+1 architecture type, a protection LSP is dedicated to each working LSP with the working LSP bridged onto the protection LSP at the source of the protection domain. 2. In the 1:1 architecture type, a protection LSP is dedicated to each working LSP. 3. In the shared mesh architecture type, possible sharing of protection capacity between disjoint link, node, or SRG failures in the network is achieved while guaranteeing recovery from a single failure. For each link in the network, it keeps track of all the working paths whose traffic will be switched onto it after a given failure. By keeping track of this, it only needs to reserve the maximum of the protection capacity required to protect a single failure in the network. 4. In the packet 1+1 architecture type, the traffic is transmitted simultaneously onto two possibly disjoint routed LSPs to the sink of the protection domain. Each pair of duplicate transmitted packets is assigned the same identifier(sequence number) but distinct from the other pairs of duplicate packets. At the sink of the protection domain, packet level selection mechanism is employed to select one of the two possibly received copies of each packet. The following list provides principles for MPLS protection architectures and mechanisms development. 1: 1:1 protection switching; 2: 1+1 protection switching; 3: shared mesh protection swiching; 4: packet 1+1 protection switching." ::= { fsMplsPsEntry 3 } fsMplsPsWorkLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of work-lsp(or work-tunnel)." ::= { fsMplsPsEntry 4 } fsMplsPsWorkLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of work-lsp(or work-tunnel)." ::= { fsMplsPsEntry 5 } fsMplsPsProtectLspName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of protect-lsp." ::= { fsMplsPsEntry 6 } fsMplsPsProtectLspId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of protect-lsp(or protect-tunnel)." ::= { fsMplsPsEntry 7 } fsMplsPsRevertiveMode OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working traffic is being transmitted via the protection LSP and when the working LSP is restored, if local protection switching requests have been previously active and now become inactive, a local wait to restore state is entered. 2. When the failed LSP is no longer in an SF condition, and no other externally initiated commands are present, a no request state is entered. During this state, switching does not occur. 1: revertive; 2: non-revertive." ::= { fsMplsPsEntry 8 } fsMplsPsWTR OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Wait to restore is only applicable for the revertive mode and applies to a working LSP. It prevents reversion back to select the working LSP until the wait to restore timer has expired. The wait to restore time may be configured by the operator in 1 minute steps between 1 and 30 minutes; the default value is 12 minutes." ::= { fsMplsPsEntry 9 } fsMplsPsHoldOff OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "In general, if lower layer(e.g., SDH or optical) protection mechanisms are being utilized in conjunction with MPLS layer protection mechanisms, then the lower layers should have a chance to restore working traffic before the MPLS layer initiates protection actions(e.g., using a hold-off timer). The objective here is to avoid duplicated protection switching in different layer networks. The default value is 0ms; the maximum value is 10s." ::= { fsMplsPsEntry 10 } fsMplsPsSwitchCondition OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-only STATUS current DESCRIPTION "The following switch initiation criteria exist: 1. an externally initiated command(clear, lockout of protection, forced switch, manual switch); 2. an automatically initiated command(signal fail) associated with a protection domain; or 3. a state (wait to restore, no request) of the protection switching function. The followings are switch request priority: 1. clear: This command clears all of the externally initiated switch commands listed below. 2. lockout of protection(LoP): Fix the selector position on the working LSP. Prevents the selector from switching to the protection LSP when it is selecting the working LSP. Switches the selector from the protection to the working LSP when it is selecting the protection LSP. 3. forced switch(FS) for working LSP: Switches the selector from the working LSP to the protection LSP (unless a higher priority switch request(i.e., LoP) is in effect). 4. signal fail: Signal fail(SF) is declared when the source of the protection domain enters the LSP defect state by receiving a BDI packet from the return LSP or out of band. 5. manual switch(MS): Switches the selector from the working LSP to the protection LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect). Switches the selector from the protection LSP to the working LSP (unless an equal or higher priority switch request(i.e., LoP, FS, SF or MS) is in effect). 6. WTR: Wait to restore is only applicable for the revertive mode and applies to a working LSP. 7. no request." ::= { fsMplsPsEntry 11 } fsMplsPsWorkLspState OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The state of working lsp state lists below: 1: defect state; 2: non-defect state." ::= { fsMplsPsEntry 12 } fsMplsPsProtLspState OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The state of protection lsp state lists below: 1: defect state; 2: non-defect state." ::= { fsMplsPsEntry 13 } fsMplsPsSwitchResult OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Which lsp is user traffic being transmitted: 1: working-lsp; 2: protection-lsp." ::= { fsMplsPsEntry 14 } fsMplsPsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It is used to create and delete a row in this table. 1: active; 2: notInService; 3: notReady; 4: createAndGo; 5: createAndWait; 6: destroy." ::= { fsMplsPsEntry 15 } fsMplsPsTrapOpen OBJECT-TYPE SYNTAX Unsigned32 (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "1:enable; 2:disable." ::= { fsMplsPsObjects 2 } fsMplsPsNotifications OBJECT IDENTIFIER ::= { fsMplsOamPs 4 } fsMplsPsSwitchPtoW NOTIFICATION-TYPE OBJECTS { fsMplsPsWorkLspName, fsMplsPsWorkLspId, fsMplsPsProtectLspName, fsMplsPsProtectLspId, fsMplsPsSwitchResult } STATUS current DESCRIPTION "This notification is generated when switching traffic from protection-lsp to working-lsp." ::= { fsMplsPsNotifications 1 } fsMplsPsSwitchWtoP NOTIFICATION-TYPE OBJECTS { fsMplsPsWorkLspName, fsMplsPsWorkLspId, fsMplsPsProtectLspName, fsMplsPsProtectLspId, fsMplsPsSwitchResult } STATUS current DESCRIPTION "This notification is generated when switching traffic from woking-lsp to protection-lsp." ::= { fsMplsPsNotifications 2 } fsMplsOamPsConformance OBJECT IDENTIFIER ::= { fsMplsOamPs 5 } fsMplsOamPsCompliances OBJECT IDENTIFIER ::= { fsMplsOamPsConformance 1 } fsMplsOamPsGroupCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for mpls oam protection group." MODULE -- this module MANDATORY-GROUPS { fsMplsPsGroup } ::= { fsMplsOamPsCompliances 1 } fsMplsOamPsGroups OBJECT IDENTIFIER ::= { fsMplsOamPsConformance 2 } fsMplsPsGroup OBJECT-GROUP OBJECTS { fsMplsPsGroupName, fsMplsPsType, fsMplsPsWorkLspName, fsMplsPsWorkLspId, fsMplsPsProtectLspName, fsMplsPsProtectLspId, fsMplsPsRevertiveMode, fsMplsPsWTR, fsMplsPsHoldOff, fsMplsPsSwitchCondition, fsMplsPsWorkLspState, fsMplsPsProtLspState, fsMplsPsSwitchResult, fsMplsPsRowStatus, fsMplsPsIndex } STATUS current DESCRIPTION "The compliance statement for mpls oam protection group management." ::= { fsMplsOamPsGroups 1 } fsMplsPsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { fsMplsPsSwitchPtoW, fsMplsPsSwitchWtoP } STATUS current DESCRIPTION "Description." ::= { fsMplsOamPsGroups 2 } END -- -- FS-MPLSOAM-MIB.mib --