-- $Id: RBN-SSE-MIB.my,v 1.1.4.3.26.1 2012/08/04 00:07:22 chiachun Exp $ -- $Source: /cvsroot/pkt/sw/se/xc/bsd/config/snmp/mibs/Attic/RBN-SSE-MIB.my,v $ -- ***************************************************************** -- RBN-SSE-MIB -- -- Copyright (c) 2008, 2009 RedBack Networks, Inc. -- All rights reserved. -- -- ***************************************************************** RBN-SSE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TruthValue, DateAndTime FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB RbnSlot, RbnPercentage FROM RBN-TC IANAItuEventType, IANAItuProbableCause FROM IANA-ITU-ALARM-TC-MIB ItuPerceivedSeverity FROM ITU-ALARM-TC-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF rbnMgmt FROM RBN-SMI; rbnSseMIB MODULE-IDENTITY LAST-UPDATED "200909010000Z" -- Sept 1, 2009 ORGANIZATION "RedBack Networks, Inc." CONTACT-INFO " RedBack Networks, Inc. Postal: 300 Holger Way San Jose, CA 95134-1362 USA Phone: +1 408 750-5000 Fax: +1 408 750-5599 E-mail: mib-info@redback.com" DESCRIPTION "This management information module defines the objects necessary to support the management of SmartEdge Server Engine(SSE) file server groups, partitions and corresponding alarms" REVISION "200909010000Z" -- Sept 1, 2009 DESCRIPTION "Initial version." ::= { rbnMgmt 48 } rbnSseMIBNotifications OBJECT IDENTIFIER ::= { rbnSseMIB 0 } rbnSseMIBObjects OBJECT IDENTIFIER ::= { rbnSseMIB 1 } rbnSseMIBConformance OBJECT IDENTIFIER ::= { rbnSseMIB 2 } -- rbnFSGroup Table rbnFSGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RbnFSGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "File-Server Group is a logical abstraction of a physical file server. This table lists the File Server Groups that have been configured on the system." ::= { rbnSseMIBObjects 1 } rbnFSGroupEntry OBJECT-TYPE SYNTAX RbnFSGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the rbnFSGroupTable." INDEX { rbnFSGroupName } ::= { rbnFSGroupTable 1 } RbnFSGroupEntry ::= SEQUENCE { rbnFSGroupName SnmpAdminString, rbnFSGroupState INTEGER, rbnFSGroupMode INTEGER, rbnFSGroupRaidMode INTEGER, rbnFSGroupRevert TruthValue, rbnFSPrimarySlot RbnSlot, rbnFSSecondarySlot RbnSlot, rbnFSActiveSlot RbnSlot } rbnFSGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A textual name for the File Server Group." ::= { rbnFSGroupEntry 1 } rbnFSGroupState OBJECT-TYPE SYNTAX INTEGER { unknown(0), up(1), down(2), partial(3), stale(4), noCard(5), unassigned(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service state of the File Server Group." ::= { rbnFSGroupEntry 2 } rbnFSGroupMode OBJECT-TYPE SYNTAX INTEGER { diskRedundancy(1), networkRedundancy(2), nonRedundant(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational mode. diskRedundancy Each hard disk on a single file-server card will mirror each other, and when one fails, the other will take over automatically. networkRedundancy One file-server is mirroring the other in the same chassis. One of the file-servers will be in active state while the other is standby or backup. nonRedundant One or two hard disks serving as generic disk." ::= { rbnFSGroupEntry 3 } rbnFSGroupRaidMode OBJECT-TYPE SYNTAX INTEGER { unknown(0), raid0(1), raid1(2), independent(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational mode of the disks. RAID0 : must use 2 disks. Non-RAID0: RAID1: imply using 2 disks, although 1 could be un-plugged. Independent (standalone): either 1 or 2 disks." ::= { rbnFSGroupEntry 4 } rbnFSGroupRevert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The reverting mode of the File Server Group. Revert back to original primary/secondary relationship if in reverted mode (that is this object has the value true(1))." DEFVAL{2} ::= { rbnFSGroupEntry 5 } rbnFSPrimarySlot OBJECT-TYPE SYNTAX RbnSlot MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis slot number in which the primary SSE card is present." ::= { rbnFSGroupEntry 6 } rbnFSSecondarySlot OBJECT-TYPE SYNTAX RbnSlot MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis slot number in which the secondary SSE card is present." ::= { rbnFSGroupEntry 7 } rbnFSActiveSlot OBJECT-TYPE SYNTAX RbnSlot MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number in which the active SSE card is present." ::= { rbnFSGroupEntry 8 } -- rbnFSPartition Table rbnFSPartitionTable OBJECT-TYPE SYNTAX SEQUENCE OF RbnFSPartitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the Partitions that have been configured on the system." ::= { rbnSseMIBObjects 2 } rbnFSPartitionEntry OBJECT-TYPE SYNTAX RbnFSPartitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the PartitionTable." INDEX { rbnFSGroupName, rbnFSPartitionName } ::= { rbnFSPartitionTable 1 } RbnFSPartitionEntry ::= SEQUENCE { rbnFSPartitionName SnmpAdminString, rbnFSPartitionState INTEGER, rbnFSPartitionSize Unsigned32, rbnFSPartitionDisk Unsigned32, rbnFSPartitionMirrored INTEGER, rbnFSPartitionRaiseTriggerPercentage RbnPercentage, rbnFSPartitionClearTriggerPercentage RbnPercentage } rbnFSPartitionName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A textual name for the Partition." ::= { rbnFSPartitionEntry 1 } rbnFSPartitionState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), stale(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the partition." ::= {rbnFSPartitionEntry 2 } rbnFSPartitionSize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "GBytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the partition in GBytes." ::= { rbnFSPartitionEntry 3 } rbnFSPartitionDisk OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "DiskId of the disk(disk num) where the partition is located. For SSE, 0 for DISK_1, 1 for DISK_2 and 2 for DISK_ALL will be used." ::= { rbnFSPartitionEntry 4 } rbnFSPartitionMirrored OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), notApplicable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mirror data to standby disk, if network redundancy is configured." ::= { rbnFSPartitionEntry 5 } rbnFSPartitionRaiseTriggerPercentage OBJECT-TYPE SYNTAX RbnPercentage(50..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Partition capacity used in percentage to trigger alarm. Raise percentage of 100 indicates alarm is triggered when the partition is completeley full." DEFVAL { 80 } ::= { rbnFSPartitionEntry 6 } rbnFSPartitionClearTriggerPercentage OBJECT-TYPE SYNTAX RbnPercentage(10..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the capacity percentage for when the alarm is cleared. Clear percentage of 10 indicates alarm is triggered when parition is at 10% below raise percentage." DEFVAL { 70 } ::= { rbnFSPartitionEntry 7 } -- Notification Definition section rbnSseAlarmDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The local date and time when the alarm was raised" ::= { rbnSseMIBObjects 3 } rbnSseAlarmSeverity OBJECT-TYPE SYNTAX ItuPerceivedSeverity MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The perceived severity of the alarm." ::= { rbnSseMIBObjects 4 } rbnSseAlarmProbableCause OBJECT-TYPE SYNTAX IANAItuProbableCause MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The probable cause for this alarm." ::= { rbnSseMIBObjects 5 } rbnSseEventType OBJECT-TYPE SYNTAX IANAItuEventType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of the alarm." ::= { rbnSseMIBObjects 6 } rbnSseAlarmDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A text string which conveys additional information about the alarm." ::= { rbnSseMIBObjects 7 } -- Notifications rbnSseFsgSwitchManual NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgSwitchManual notification signifies that the FS group manual switch in progress." ::= { rbnSseMIBNotifications 1 } rbnSseFsgSwitchAuto NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgSwitchAuto notification signifies that the FS group auto switch in progress." ::= { rbnSseMIBNotifications 2 } rbnSseFsgSwitchCompleted NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgSwitchCompleted notification signifies that the FS group switch completed." ::= { rbnSseMIBNotifications 3 } rbnSseFsgSwitchFail NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgSwitchFail notification signifies that the FS group switch failed." ::= { rbnSseMIBNotifications 4 } rbnSseFsgSwitchWtr NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgSwitchWtr notification signifies that the FS group auto switch is waiting to restored." ::= { rbnSseMIBNotifications 5 } rbnSseFsgNotOperational NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgNotOperational notification signifies that the FS group is not operational." ::= { rbnSseMIBNotifications 6 } rbnSseFsgBlockDeviceFail NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSGroupState } STATUS current DESCRIPTION "A rbnSseFsgBlockDeviceFail notification signifies that the FS group block device (DRBD) failed." ::= { rbnSseMIBNotifications 7 } rbnSseFsgPartitionNotOperational NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgPartitionNotOperational notification signifies that the FS group partition not operational." ::= { rbnSseMIBNotifications 8 } rbnSseFsgParitionDataSyncing NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgParitionDataSyncing notification signifies that the FS group partition data sync failed." ::= { rbnSseMIBNotifications 9 } rbnSseFsgParitionDataSyncFail NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgParitionDataSyncFail notification signifies that the FS group partition data sync failed." ::= { rbnSseMIBNotifications 10 } rbnSseFsgPartitionFull NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgPartitionFull notification signifies that the FS group partition is full" ::= { rbnSseMIBNotifications 11 } rbnSseFsgPartitionLow NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgPartitionLow notification signifies that the FS group partition is low in space." ::= { rbnSseMIBNotifications 12 } rbnSseFsgPartitionNotOperStandby NOTIFICATION-TYPE OBJECTS { rbnSseAlarmDateAndTime, rbnSseAlarmSeverity, rbnSseAlarmProbableCause, rbnSseEventType, rbnSseAlarmDescription, rbnFSPartitionState } STATUS current DESCRIPTION "A rbnSseFsgPartitionNotOperStandby notification signifies that the FS group partition is not ready at standby" ::= { rbnSseMIBNotifications 13 } -- Conformance information -- Compliance statements rbnSseGroups OBJECT IDENTIFIER ::= { rbnSseMIBConformance 1 } rbnSseCompliances OBJECT IDENTIFIER ::= { rbnSseMIBConformance 2 } -- Compliance statements rbnSseMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Redback SmartEdge Server Engine(SSE) MIB." MODULE -- this module MANDATORY-GROUPS { rbnSseFileServerGroup, rbnSsePartitionGroup, rbnSseEventObjectGroup, rbnSseEventGroup } ::= { rbnSseCompliances 1 } -- units of conformance rbnSseFileServerGroup OBJECT-GROUP OBJECTS { rbnFSGroupMode, rbnFSGroupState, rbnFSGroupRaidMode, rbnFSGroupRevert, rbnFSPrimarySlot, rbnFSSecondarySlot, rbnFSActiveSlot } STATUS current DESCRIPTION "A collection of rbnFSGroupTable objects providing information applicable to all file server groups." ::= { rbnSseGroups 1 } rbnSsePartitionGroup OBJECT-GROUP OBJECTS { rbnFSPartitionSize, rbnFSPartitionState, rbnFSPartitionDisk, rbnFSPartitionMirrored, rbnFSPartitionRaiseTriggerPercentage, rbnFSPartitionClearTriggerPercentage } STATUS current DESCRIPTION "A collection of rbnFSPartitionTable objects providing information applicable to all file server group partitions." ::= { rbnSseGroups 2 } rbnSseEventObjectGroup OBJECT-GROUP OBJECTS { rbnSseEventType, rbnSseAlarmDateAndTime, rbnSseAlarmDescription, rbnSseAlarmProbableCause, rbnSseAlarmSeverity } STATUS current DESCRIPTION "A collection of rbnSse notification objects." ::= { rbnSseGroups 3 } rbnSseEventGroup NOTIFICATION-GROUP NOTIFICATIONS { rbnSseFsgSwitchManual, rbnSseFsgSwitchAuto, rbnSseFsgSwitchCompleted, rbnSseFsgSwitchFail, rbnSseFsgSwitchWtr, rbnSseFsgNotOperational, rbnSseFsgBlockDeviceFail, rbnSseFsgPartitionNotOperational, rbnSseFsgParitionDataSyncing, rbnSseFsgParitionDataSyncFail, rbnSseFsgPartitionFull, rbnSseFsgPartitionLow, rbnSseFsgPartitionNotOperStandby } STATUS current DESCRIPTION "A collection of rbnSse notifications." ::= { rbnSseGroups 4 } END