ELTEX-MES-IP DEFINITIONS ::= BEGIN -- Title: ELTEX MES IP Private Extension -- Version: 1.1 -- Date: 12 Dec 2017 IMPORTS eltMes FROM ELTEX-MES rlInetRoutingDistanceEntry, rlInetStaticRouteEntry FROM RADLAN-IPv6 OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TruthValue, DisplayString, RowStatus FROM SNMPv2-TC ifIndex, InterfaceIndex FROM IF-MIB EltexBgpAsSize, EltexBgpOriginCode, EltexBgpRouteMapAsPathAction FROM ELTEX-BGP-MIB rlRouteMapPbrEntry FROM MARVELL-ROUTEMAP-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB RlRedistDstProtocol FROM RADLAN-Redistribute inetCidrRouteEntry FROM IP-FORWARD-MIB VlanId FROM Q-BRIDGE-MIB; eltMesIpSpec MODULE-IDENTITY LAST-UPDATED "201402120000Z" ORGANIZATION "Eltex Enterprise Co, Ltd." CONTACT-INFO "www.eltex.nsk.ru" DESCRIPTION "The private MIB module definition for IP MIB." REVISION "200606220000Z" DESCRIPTION "Initial version of this MIB." ::= { eltMes 91 } EltMesRouteMapPermitOrDeny ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Whether the behavior is to permit or deny." SYNTAX INTEGER { permit(1), -- Unmatched routes are permitted deny(2) -- Unmatched routes are denied } EltInetCidrRouteInstallStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "If the route is installed in the forwarding routing table, then success, otherwise failure." SYNTAX INTEGER { success(1), -- Route set in forwarding table failure(2) -- Route not set in forwarding table } eltMesOspf OBJECT IDENTIFIER ::= { eltMesIpSpec 1 } -- see eltIpRouter.mib eltMesArpSpec OBJECT IDENTIFIER ::= { eltMesIpSpec 3 } -- see eltArpInterfaceTable.mib -- -- eltMesInetRouting -- eltMesInetRouting OBJECT IDENTIFIER ::= { eltMesIpSpec 4 } eltInetRoutingDistanceTable OBJECT-TYPE SYNTAX SEQUENCE OF EltInetRoutingDistanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines administrative distances for different protocol routes that are inserted into the routing table. The table augments rlInetRoutingDistanceTable." ::= { eltMesInetRouting 1 } eltInetRoutingDistanceEntry OBJECT-TYPE SYNTAX EltInetRoutingDistanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of distances per inet address type." AUGMENTS { rlInetRoutingDistanceEntry } ::= { eltInetRoutingDistanceTable 1 } EltInetRoutingDistanceEntry ::= SEQUENCE { eltInetRoutingDistanceBgpInternal INTEGER, eltInetRoutingDistanceBgpExternal INTEGER, eltInetRoutingDistanceIsisl1Internal INTEGER, eltInetRoutingDistanceIsisl2Internal INTEGER, eltInetRoutingDistanceIsisl1External INTEGER, eltInetRoutingDistanceIsisl2External INTEGER } eltInetRoutingDistanceBgpInternal OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for internal BGP routes." ::= { eltInetRoutingDistanceEntry 1 } eltInetRoutingDistanceBgpExternal OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for external BGP routes." ::= { eltInetRoutingDistanceEntry 2 } eltInetRoutingDistanceIsisl1Internal OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for internal ISIS level 1 routes." ::= { eltInetRoutingDistanceEntry 3 } eltInetRoutingDistanceIsisl2Internal OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for internal ISIS level 2 routes." ::= { eltInetRoutingDistanceEntry 4 } eltInetRoutingDistanceIsisl1External OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for external ISIS level 1 routes." ::= { eltInetRoutingDistanceEntry 5 } eltInetRoutingDistanceIsisl2External OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance used for external ISIS level 2 routes." ::= { eltInetRoutingDistanceEntry 6 } eltInetStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF EltInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines administrative distances for different protocol routes that are inserted into the routing table. The table augments rlInetStaticRouteTable." ::= { eltMesInetRouting 2 } eltInetStaticRouteEntry OBJECT-TYPE SYNTAX EltInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular Static(user configured) route to a particular destination." AUGMENTS { rlInetStaticRouteEntry } ::= { eltInetStaticRouteTable 1 } EltInetStaticRouteEntry ::= SEQUENCE { eltInetStaticRouteName DisplayString } eltInetStaticRouteName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name assigned to the static route." ::= { eltInetStaticRouteEntry 1 } eltMesRouteMap OBJECT IDENTIFIER ::= { eltMesIpSpec 5 } -- -- BGP Route Map Augment. -- -- This is the top-level MIB for the BGP Router feature. It controls -- creation and global configuration of the protocol. -- eltMesRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF EltMesRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BGP Route Maps. If a particular match or set category does not apply to a route map then do not define the corresponding field in the MIB row." ::= { eltMesRouteMap 1 } eltMesRouteMapEntry OBJECT-TYPE SYNTAX EltMesRouteMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a filter consisting of Match and Set entries." AUGMENTS { rlRouteMapPbrEntry } ::= { eltMesRouteMapTable 1 } EltMesRouteMapEntry ::= SEQUENCE { eltMesRouteMapMatchAddrPrefixListName DisplayString, eltMesRouteMapMatchNextPrefixListName DisplayString, eltMesRouteMapMatchSourcePrefixListName DisplayString, eltMesRouteMapMatchLocPref Unsigned32, eltMesRouteMapMatchLocPrefDef TruthValue, eltMesRouteMapMatchMed Unsigned32, eltMesRouteMapMatchMedDef TruthValue, eltMesRouteMapMatchOrigin EltexBgpOriginCode, eltMesRouteMapMatchOriginDef TruthValue, eltMesRouteMapMatchAnd TruthValue, eltMesRouteMapActionAS Unsigned32, eltMesRouteMapActionASOperation EltexBgpRouteMapAsPathAction, eltMesRouteMapActionASLimUpper Unsigned32, eltMesRouteMapActionASLimUpperDef TruthValue, eltMesRouteMapActionAsPrependCount Unsigned32, eltMesRouteMapActionAsPrependSize EltexBgpAsSize, eltMesRouteMapActionAsPrependAsVals OCTET STRING, eltMesRouteMapActionAsRemove DisplayString, eltMesRouteMapActionLocPref Unsigned32, eltMesRouteMapActionLocPrefDef TruthValue, eltMesRouteMapActionMed Unsigned32, eltMesRouteMapActionMedDef TruthValue, eltMesRouteMapActionOrigin EltexBgpOriginCode, eltMesRouteMapActionOriginDef TruthValue, eltMesRouteMapActionWeight Unsigned32, eltMesRouteMapActionWeightDef TruthValue, eltMesRouteMapActionNextHopPeer TruthValue, eltMesRouteMapType EltMesRouteMapPermitOrDeny, eltMesRouteMapContinue Unsigned32 } eltMesRouteMapMatchAddrPrefixListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the IP Prefix access list used to match the NLRI attribute against." DEFVAL { "" } ::= { eltMesRouteMapEntry 1 } eltMesRouteMapMatchNextPrefixListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the IP Prefix access list used to match the Next Hop attribute against." DEFVAL { "" } ::= { eltMesRouteMapEntry 2 } eltMesRouteMapMatchSourcePrefixListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the IP Prefix access list used to match the source address against." DEFVAL { "" } ::= { eltMesRouteMapEntry 3 } eltMesRouteMapMatchLocPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value to match the Local Preference attribute against. This value is only used if eltMesRouteMapMatchLocPrefDef is TRUE. If a route does not contain a local preference attribute, this match rule is ignored." DEFVAL { 0 } ::= { eltMesRouteMapEntry 4 } eltMesRouteMapMatchLocPrefDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapMatchLocPref should be used for matching." DEFVAL { false } ::= { eltMesRouteMapEntry 5 } eltMesRouteMapMatchMed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value to match the Multiple Exit Descriminator attribute against. A value of 0 indicates a match on no MED or a MED of 0. This value is only used if eltMesRouteMapMatchMedDef is TRUE." DEFVAL { 0 } ::= { eltMesRouteMapEntry 6 } eltMesRouteMapMatchMedDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapMatchMed should be used for matching." DEFVAL { false } ::= { eltMesRouteMapEntry 7 } eltMesRouteMapMatchOrigin OBJECT-TYPE SYNTAX EltexBgpOriginCode MAX-ACCESS read-write STATUS current DESCRIPTION "The value to match the Origin attribute against. This value is only used if eltMesRouteMapMatchOriginDef is TRUE." DEFVAL { originIncomplete } ::= { eltMesRouteMapEntry 8 } eltMesRouteMapMatchOriginDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapMatchOrigin should be used for matching." DEFVAL { false } ::= { eltMesRouteMapEntry 9 } eltMesRouteMapMatchAnd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the match statements in this route map should be logically ANDed with the match statements in the route map indicated by eltMesRouteMapContinue. This field is only relevant for policy route maps. If the route map indicated by eltMesRouteMapContinue is not found then the match will fail. All route maps in a series must have the same eltMesRouteMapType. If this field is set then no set statements can be configured in the row. This field can only be updated if the row is not active." DEFVAL { false } ::= { eltMesRouteMapEntry 10 } eltMesRouteMapActionAS OBJECT-TYPE SYNTAX Unsigned32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the local AS number is prepended to the AS path if there is a match. This is only relevant if the route map is being used for exporting routes, or for setting attributes for an aggregate route which does not have the AS_SET option set. This value is only used if the value of eltMesRouteMapActionASOperation is SET" DEFVAL { 0 } ::= { eltMesRouteMapEntry 11 } eltMesRouteMapActionASOperation OBJECT-TYPE SYNTAX EltexBgpRouteMapAsPathAction MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in rlRouteMapPbrActionAS should be used for updating attributes. The possible action values are: none - Ignore eltMesRouteMapActionAS and do nothing. set - Prepend the local AS number the number of times specified by eltMesRouteMapActionAS." DEFVAL { none } ::= { eltMesRouteMapEntry 12 } eltMesRouteMapActionASLimUpper OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "If there is a match this will cause the AS_PATHLIMIT attribute to be added if it does not already exist. If it does exist then it will be replaced. In either case the specified limit and the local AS will be set. This can be used for traffic engineering purposes in association with a less specific prefix. A value of zero is permissible and restricts advertisement of locally generated routes to IBGP peers. However, an AS_PATHLIMIT with an upper bound value of 0 will not be externally visible. That is, it will not be included in UPDATEs. This value is only used if eltMesRouteMapActionASLimUpperDef is TRUE." DEFVAL { 1 } ::= { eltMesRouteMapEntry 13 } eltMesRouteMapActionASLimUpperDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapActionASLimUpper should be used for updating attributes." DEFVAL { false } ::= { eltMesRouteMapEntry 14 } eltMesRouteMapActionAsPrependCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "To prepend AS numbers to the AS-Path, set eltMesRouteMapActionAsPrependCount to the count of the AS numbers to prepend, set eltMesRouteMapActionAsPrependSize to indicate whether the values are 2 or 4 octet AS numbers and fill in eltMesRouteMapActionAsPrependAsVals with the AS numbers themselves. When exporting routes to EBGP, BGP applies the AS-prepend rule before prepending the local AS number as required by the BGP specification. This ensures that the local AS number is always the first AS number in the AS path in this case. This field can only be updated if the row is not active." DEFVAL { 0 } ::= { eltMesRouteMapEntry 15 } eltMesRouteMapActionAsPrependSize OBJECT-TYPE SYNTAX EltexBgpAsSize MAX-ACCESS read-write STATUS current DESCRIPTION "The size of AS numbers in the field eltMesRouteMapActionAsPrependAsVals to prepend to the AS path if there is a match. This field is only used if eltMesRouteMapActionAsPrependCount is non-zero. This field can only be updated if the row is not active." DEFVAL { fourOctet } ::= { eltMesRouteMapEntry 16 } eltMesRouteMapActionAsPrependAsVals OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "An array containing the AS numbers to prepend to the AS path if there is a match. The length of each AS number is given by eltMesRouteMapActionAsPrependSize. This field is only used if eltMesRouteMapActionAsPrependCount is non-zero. The count of AS numbers is given by eltMesRouteMapActionAsPrependCount. This field can only be updated if the row is not active." ::= { eltMesRouteMapEntry 17 } eltMesRouteMapActionAsRemove OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contains the regular expression to use to remove AS numbers from an AS-Path for a route. This is stored here in ASCII format. AS numbers are matched as decimal numbers. For example, the AS number '0x0123' should be represented in the regular expression string as '291'. The string is not NULL-terminated. A NULL string or an se_as_remove_exp_len value of zero indicates that the field is not in use." ::= { eltMesRouteMapEntry 18 } eltMesRouteMapActionLocPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the Local Pref to if there is a match. This value is only used if eltMesRouteMapActionLocPrefDef is TRUE." DEFVAL { 0 } ::= { eltMesRouteMapEntry 19 } eltMesRouteMapActionLocPrefDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapActionLocPref should be used for updating attributes." DEFVAL { false } ::= { eltMesRouteMapEntry 20 } eltMesRouteMapActionMed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the MED to if there is a match. A value of 0 indicates that the MED should be removed. This value is only used if eltMesRouteMapActionMedDef is TRUE." DEFVAL { 0 } ::= { eltMesRouteMapEntry 21 } eltMesRouteMapActionMedDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapActionMed should be used for updating attributes." DEFVAL { false } ::= { eltMesRouteMapEntry 22 } eltMesRouteMapActionOrigin OBJECT-TYPE SYNTAX EltexBgpOriginCode MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the Origin to if there is a match. This value is only used if eltMesRouteMapActionOriginDef is TRUE." DEFVAL { originIncomplete } ::= { eltMesRouteMapEntry 23 } eltMesRouteMapActionOriginDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapActionOrigin should be used for updating attributes." DEFVAL { false } ::= { eltMesRouteMapEntry 24 } eltMesRouteMapActionWeight OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value to set the Weight to if there is a match. This value is only used if eltMesRouteMapActionWeightDef is TRUE." DEFVAL { 0 } ::= { eltMesRouteMapEntry 25 } eltMesRouteMapActionWeightDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not the value in eltMesRouteMapActionWeight should be used for updating attributes." DEFVAL { false } ::= { eltMesRouteMapEntry 26 } eltMesRouteMapActionNextHopPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true' in an import route map, then routes matching this route-map will have their Next Hop set to the peer's address. This field has no effect on route maps used for anything other than import. This field overrides rlRouteMapPbrActionNextHopPeer if set to 'true'. This field is not applied to VPNv4 or VPNv6 routes." DEFVAL { false } ::= { eltMesRouteMapEntry 27 } eltMesRouteMapType OBJECT-TYPE SYNTAX EltMesRouteMapPermitOrDeny MAX-ACCESS read-write STATUS current DESCRIPTION "The type of route map entry. This is only relevant for policy filtering route maps. It indicates the action which should apply to a route which matches the route map entry. This field is ignored for route maps used for aggregation." DEFVAL { permit } ::= { eltMesRouteMapEntry 28 } eltMesRouteMapContinue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Field containing the number of the route map clause to continue processing at. For a series of eltMesRouteMapTable rows that are ANDed together (that is, the eltMesRouteMapMatchAnd field is set to TRUE for all of the series except the last), eltMesRouteMapContinue can be used irrespective of the eltMesRouteMapType. That is, eltMesRouteMapType can be permit or deny for the series. For a series of route attribute changes (that is, a series of eltMesRouteMapTable rows that modify the route attributes of a permitted route, where the rows are linked with the eltMesRouteMapContinue field), all of the rows must have eltMesRouteMapType permit. If the route map matches, the set commands for the matching clause will be applied, and filtering will then continue from the route map clause specified in this field. If no continue clause is specified (value of 0), or the referenced route map clause does not exist, then processing for the given route will be complete. The continue field references the rlRouteMapPbrRouteMapSectionId field of the desired clause. In order to prevent processing loops, the continue clause must have a higher number than the current clause." DEFVAL { 0 } ::= { eltMesRouteMapEntry 29 } -- Summary Address Table. -- -- This table is used to reduce the number of similar routes -- that are advertised to routing protocol managers. -- eltInetSummAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF EltInetSummAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of summary address entries. This table is used to reduce the number of similar routes that are advertised to routing protocol managers." ::= { eltMesInetRouting 3 } eltInetSummAddrEntry OBJECT-TYPE SYNTAX EltInetSummAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular entry in the Summary Address table." INDEX { eltInetSummAddrTargetProtocol, eltInetSummAddrTargetInstance, eltInetSummAddrAddrType, eltInetSummAddrAddress, eltInetSummAddrAddrPfxLen } ::= { eltInetSummAddrTable 1 } EltInetSummAddrEntry ::= SEQUENCE { eltInetSummAddrTargetProtocol RlRedistDstProtocol, eltInetSummAddrTargetInstance Unsigned32, eltInetSummAddrAddrType InetAddressType, eltInetSummAddrAddress InetAddress, eltInetSummAddrAddrPfxLen Unsigned32, eltInetSummAddrRowStatus RowStatus, eltInetSummAddrAdvertise TruthValue } eltInetSummAddrTargetProtocol OBJECT-TYPE SYNTAX RlRedistDstProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol to which the summary address specified in this row is exported to." ::= { eltInetSummAddrEntry 1 } eltInetSummAddrTargetInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The instance ID of a protocol specified in the eltInetSummAddrTargetProtocol field." ::= { eltInetSummAddrEntry 2 } eltInetSummAddrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the summary address prefix." ::= { eltInetSummAddrEntry 3 } eltInetSummAddrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Summary IP address prefix value. This is the address that is used in combination with eltInetSummAddrAddrPfxLen to specify the prefix used to summarize any equal or more-specific routes to the target protocol." ::= { eltInetSummAddrEntry 4 } eltInetSummAddrAddrPfxLen OBJECT-TYPE SYNTAX Unsigned32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Summary IP address prefix length (in bits). This is used in combination with eltInetSummAddrAddress to specify the prefix used to summarize any equal or more-specific routes to the target protocol. The prefix length may not be zero." ::= { eltInetSummAddrEntry 5 } eltInetSummAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a summary address table entry." ::= { eltInetSummAddrEntry 6 } eltInetSummAddrAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then when any routes matching the summary address prefix (after filtering) would be advertised to the target protocol instance, those routes are suppressed and a summary address prefix is advertised instead. If this is set to FALSE, then any matching routes are suppressed (as in the TRUE case), but the summary address prefix is not advertised to the target instance either." DEFVAL { true } ::= { eltInetSummAddrEntry 7 } eltInetCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF EltInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table the status of set the route in the forwarding table" ::= { eltMesInetRouting 4 } eltInetCidrRouteEntry OBJECT-TYPE SYNTAX EltInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry the status of set the route in the forwarding table" AUGMENTS { inetCidrRouteEntry } ::= { eltInetCidrRouteTable 1 } EltInetCidrRouteEntry ::= SEQUENCE { eltInetCidrRouteInstallStatus EltInetCidrRouteInstallStatus } eltInetCidrRouteInstallStatus OBJECT-TYPE SYNTAX EltInetCidrRouteInstallStatus MAX-ACCESS read-only STATUS current DESCRIPTION "If the route is installed in the forwarding routing table, then success, otherwise failure" ::= { eltInetCidrRouteEntry 1 } eltMesIpMgmt OBJECT IDENTIFIER ::= { eltMesIpSpec 6 } eltIpMgmtInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF EltIpMgmtInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains ip management interfaces." ::= { eltMesIpMgmt 1 } eltIpMgmtInterfaceEntry OBJECT-TYPE SYNTAX EltIpMgmtInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { ifIndex } ::= { eltIpMgmtInterfaceTable 1 } EltIpMgmtInterfaceEntry ::= SEQUENCE { eltIpMgmtInterfaceOuterVlanTag VlanId, eltIpMgmtInterfaceRowStatus RowStatus } eltIpMgmtInterfaceOuterVlanTag OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Outer vlan tag for ip management interface." ::= { eltIpMgmtInterfaceEntry 1 } eltIpMgmtInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry." ::= { eltIpMgmtInterfaceEntry 2 } END