-- DHCPv6 Server MIB overview: -- DHCPv6 Server MIB falls under dnOS MIB node of the private subtree. DNOS-DHCP6SERVER-PRIVATE-MIB DEFINITIONS ::= BEGIN -- Broadcom DNOS DHCPv6 Server MIB -- Copyright 2016 Broadcom. -- This SNMP Management Information Specification -- embodies Broadcom's confidential and proprietary -- intellectual property. Broadcom retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", Broadcom -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, RowPointer, MacAddress, StorageType, TruthValue FROM SNMPv2-TC DisplayString, PhysAddress FROM RFC1213-MIB Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix, Ipv6AddressIfIdentifier, Ipv6IfIndexOrZero FROM IPV6-TC dnOS FROM DELL-REF-MIB; fastPathDHCP6ServerPrivate MODULE-IDENTITY LAST-UPDATED "201804170000Z" -- 17 Apr 2018 11:44:00 GMT ORGANIZATION "Dell EMC" CONTACT-INFO "" DESCRIPTION "The Broadcom Private MIB for DNOS DHCPv6 Server/Relay" -- Revision history. REVISION "201804170000Z" -- 17 Apr 2018 11:44:00 GMT DESCRIPTION "DHCPv6 enchancement to support confirm/decline messages." REVISION "201101260000Z" -- 26 Jan 2011 12:00:00 GMT DESCRIPTION "Postal address updated." REVISION "200705230000Z" -- 23 May 2007 12:00:00 GMT DESCRIPTION "Dell branding related changes." ::= { dnOS 25 } --************************************************************************************** -- agentDhcp6ServerGroup -> contains MIB objects displaying various properties -- of a DHCPv6 server. -- --************************************************************************************** agentDhcp6ServerGroup OBJECT IDENTIFIER ::= { fastPathDHCP6ServerPrivate 1 } agentDhcp6ServerAdminMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin-mode of the DHCPv6 Server/Relay." ::= { agentDhcp6ServerGroup 1 } agentDhcp6ServerRelayOptParm OBJECT-TYPE SYNTAX Integer32 (54..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The numeric value for the Relay Agent Information Option to be used by DHCPv6 Server/Relay. Note : The configuration is no longer valid as this is upgraded with RFC 4649." ::= { agentDhcp6ServerGroup 2 } agentDhcp6ServerRelayOptRemoteIdSuboptParm OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The numeric value for the Relay Agent Information Option Remote-ID Sub-option to be used by DHCPv6 Server/Relay. Note : The configuration is no longer valid as this is upgraded with RFC 4649." ::= { agentDhcp6ServerGroup 3 } agentDhcp6ServerDuid OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCPv6 Server unique DUID. This value cannot be modified" ::= { agentDhcp6ServerGroup 4 } agentDhcp6ServerMalformedMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed(truncated or corrupt) messages that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 5 } agentDhcp6ServerDiscardedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded messages that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 6 } agentDhcp6ServerSOLICITMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type SOLICIT that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 7 } agentDhcp6ServerREQUESTMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REQUEST that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 8 } agentDhcp6ServerCONFIRMMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type CONFIRM that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 9 } agentDhcp6ServerRENEWMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RENEW that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 10 } agentDhcp6ServerREBINDMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REBIND that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 11 } agentDhcp6ServerRELEASEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELEASE that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 12 } agentDhcp6ServerDECLINEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type DECLINE that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 13 } agentDhcp6ServerINFORMREQMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type INFORMATION-REQUEST that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 14 } agentDhcp6ServerRELAYREPLYMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-REPLY that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 15 } agentDhcp6ServerRELAYFORWMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-FORWARD that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 16 } agentDhcp6ServerADVERTISEMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type ADVERTISE that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 17 } agentDhcp6ServerREPLYMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REPLY that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 18 } agentDhcp6ServerRECONFIGUREMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RECONFIGURE that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 19 } agentDhcp6ServerRELAYREPLYMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-REPLY that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 20 } agentDhcp6ServerRELAYFORWMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-FORWARD that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 21 } agentDhcp6ServerClearStatistics OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the DHCPv6 server statistics." ::= { agentDhcp6ServerGroup 22 } agentDhcp6ServerTOTALMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DHCPv6 packets that have been sent by the DHCPv6 server." ::= { agentDhcp6ServerGroup 23 } agentDhcp6ServerTOTALMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of DHCPv6 packets that have been received by the DHCPv6 server." ::= { agentDhcp6ServerGroup 24 } agentDhcp6ServerConflictLoggingMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Conflict logging mode of DHCPv6 Server/Relay." ::= { agentDhcp6ServerGroup 25 } --********************************************************************************** -- agentDhcp6ServerPoolConfigGroup -- This group contains four tables : agentDhcp6ServerPoolConfigTable, -- agentDhcp6ServerPoolDnsDomainTable, -- agentDhcp6ServerPoolDnsServerTable, -- agentDhcp6ServerPoolAddressTable -- -- agentDhcp6ServerPoolConfigTable -> This table is used to configure a -- new DHCPv6 pool on a DHCPv6 server. This table -- is also used to delete a configured DHCPv6 pool. -- -- agentDhcp6ServerPoolDnsDomainTable -> This table is used to configure DNS domain names -- for DHCPv6 "stateless" information requests. -- agentDhcp6ServerPoolDnsServerTable -> This table is used to configure DNS IPv6 server -- addresses for DHCPv6 "stateless" information requests. -- agentDhcp6ServerPoolAllocationTable -> This table is used to configure IPv6 prefixes -- for DHCPv6 Server prefix delegation to DHCPv6 clients. -- --********************************************************************************** agentDhcp6ServerPoolConfigGroup OBJECT IDENTIFIER ::= { fastPathDHCP6ServerPrivate 2 } agentDhcp6ServerPoolNameCreate OBJECT-TYPE SYNTAX DisplayString (SIZE(0|1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcp6ServerPoolConfigTable. For this reason the get operation on object agentDhcp6ServerPoolNameCreate becomes insignificant." ::= { agentDhcp6ServerPoolConfigGroup 1 } agentDhcp6ServerPoolConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerPoolConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server Pool configuration entries." ::= { agentDhcp6ServerPoolConfigGroup 2 } agentDhcp6ServerPoolConfigEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerPoolConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server pool." INDEX { agentDhcp6ServerPoolIndex } ::= { agentDhcp6ServerPoolConfigTable 1 } AgentDhcp6ServerPoolConfigEntry ::= SEQUENCE { agentDhcp6ServerPoolIndex Unsigned32, agentDhcp6ServerPoolName DisplayString, agentDhcp6ServerPoolType INTEGER, agentDhcp6ServerPoolDnsDomainCreate DisplayString, agentDhcp6ServerPoolDnsServerCreate Ipv6Address, agentDhcp6ServerPoolRowStatus RowStatus } agentDhcp6ServerPoolIndex OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The Pool Index, which 'll be used as index for the PoolConfig Table." ::= { agentDhcp6ServerPoolConfigEntry 1 } agentDhcp6ServerPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DHCPv6 pool. This value cannot be modified" ::= { agentDhcp6ServerPoolConfigEntry 2 } agentDhcp6ServerPoolType OBJECT-TYPE SYNTAX INTEGER{ un-allocated(0), dynamic(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of the binding that is associated with this pool." ::= { agentDhcp6ServerPoolConfigEntry 3 } agentDhcp6ServerPoolDnsDomainCreate OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "A DNS domain for a pool is created by applying write operation on this MIB object and providing a new DNS domain name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS domain name, the user should perform the traversal of agentDhcp6ServerPoolDnsDomainTable. For this reason the get operation on object agentDhcp6ServerDnsDomainCreate becomes insignificant." ::= { agentDhcp6ServerPoolConfigEntry 4 } agentDhcp6ServerPoolDnsServerCreate OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "A DNS server for a pool is created by applying write operation on this MIB object and providing a new DNS server address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS server address, the user should perform the traversal of agentDhcp6ServerPoolDnsServerTable. For this reason the get operation on object agentDhcp6ServerDnsServerCreate becomes insignificant." ::= { agentDhcp6ServerPoolConfigEntry 5 } agentDhcp6ServerPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcp6ServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. " ::= { agentDhcp6ServerPoolConfigEntry 6 } --********************************************************************************** agentDhcp6ServerPoolDnsDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerPoolDnsDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server Pool's DNS domain entries." ::= { agentDhcp6ServerPoolConfigGroup 4 } agentDhcp6ServerPoolDnsDomainEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerPoolDnsDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server pool's DNS domains." INDEX { agentDhcp6ServerPoolIndex, agentDhcp6ServerPoolDnsDomainIndex } ::= { agentDhcp6ServerPoolDnsDomainTable 1 } -- All objects are of type read-write AgentDhcp6ServerPoolDnsDomainEntry ::= SEQUENCE { agentDhcp6ServerPoolDnsDomainIndex Unsigned32, agentDhcp6ServerPoolDnsDomainName DisplayString, agentDhcp6ServerPoolDnsDomainRowStatus RowStatus } agentDhcp6ServerPoolDnsDomainIndex OBJECT-TYPE SYNTAX Unsigned32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS Domain Index, which will be used as index for the DnsDomain Table." ::= { agentDhcp6ServerPoolDnsDomainEntry 1 } agentDhcp6ServerPoolDnsDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies a DNS domain name for distribution to a DHCPv6 client." ::= { agentDhcp6ServerPoolDnsDomainEntry 2 } agentDhcp6ServerPoolDnsDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS domain is created by applying write operation on 'agentDhcp6ServerDnsDomainCreate', row-status becomes 'active'. If row-status for a DnsDomainEntry is set to 'destroy', the corresponding DNS domain gets deleted. " ::= { agentDhcp6ServerPoolDnsDomainEntry 3 } --********************************************************************************** agentDhcp6ServerPoolDnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerPoolDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server Pool's DNS server address entries." ::= { agentDhcp6ServerPoolConfigGroup 6 } agentDhcp6ServerPoolDnsServerEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerPoolDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server pool's DNS server addresses." INDEX { agentDhcp6ServerPoolIndex, agentDhcp6ServerPoolDnsServerIndex } ::= { agentDhcp6ServerPoolDnsServerTable 1 } -- All objects are of type read-write AgentDhcp6ServerPoolDnsServerEntry ::= SEQUENCE { agentDhcp6ServerPoolDnsServerIndex Unsigned32, agentDhcp6ServerPoolDnsServerAddress Ipv6Address, agentDhcp6ServerPoolDnsServerRowStatus RowStatus } agentDhcp6ServerPoolDnsServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS Server Index, which will be used as index for the DNS Server Table." ::= { agentDhcp6ServerPoolDnsServerEntry 1 } agentDhcp6ServerPoolDnsServerAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies a DNS server address for distribution to a DHCPv6 client." ::= { agentDhcp6ServerPoolDnsServerEntry 2 } agentDhcp6ServerPoolDnsServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS server is created by applying write operation on 'agentDhcp6ServerDnsServerCreate', row-status becomes 'active'. If row-status for a DnsServerEntry is set to 'destroy', the corresponding DNS server gets deleted. " ::= { agentDhcp6ServerPoolDnsServerEntry 3 } --********************************************************************************** agentDhcp6ServerPoolAllocationTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerPoolAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server pool's allocation entries, showing prefix delegation specific parameters." ::= { agentDhcp6ServerPoolConfigGroup 7 } agentDhcp6ServerPoolAllocationEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerPoolAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server pool's prefix delegation information." INDEX { agentDhcp6ServerPoolIndex, agentDhcp6ServerPoolAllocationIndex } ::= { agentDhcp6ServerPoolAllocationTable 1 } -- All objects are of type read-write AgentDhcp6ServerPoolAllocationEntry ::= SEQUENCE { agentDhcp6ServerPoolAllocationIndex Unsigned32, agentDhcp6ServerPoolAllocationClientIdentifier DisplayString, agentDhcp6ServerPoolAllocationPrefix Ipv6AddressPrefix, agentDhcp6ServerPoolAllocationPrefixLength Integer32, agentDhcp6ServerPoolAllocationClientName DisplayString, agentDhcp6ServerPoolAllocationIaid Unsigned32, agentDhcp6ServerPoolAllocationValidLifetime Unsigned32, agentDhcp6ServerPoolAllocationPreferLifetime Unsigned32, agentDhcp6ServerPoolAllocationRowStatus RowStatus } agentDhcp6ServerPoolAllocationIndex OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS Server Pool Allocation Index, which will be used as index for the DNS Server Pool Allocation Table." ::= { agentDhcp6ServerPoolAllocationEntry 1 } agentDhcp6ServerPoolAllocationClientIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client. " ::= { agentDhcp6ServerPoolAllocationEntry 2 } agentDhcp6ServerPoolAllocationPrefix OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address prefix for delegation to DHCPv6 clients." ::= { agentDhcp6ServerPoolAllocationEntry 3 } agentDhcp6ServerPoolAllocationPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the number of bits that comprise the address-prefix mask length." ::= { agentDhcp6ServerPoolAllocationEntry 4 } agentDhcp6ServerPoolAllocationClientName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "It specifies a name for a DHCPv6 client. This name is purely used for internal use, and can be a NULL string." ::= { agentDhcp6ServerPoolAllocationEntry 5 } agentDhcp6ServerPoolAllocationIaid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a identity association ID (IAID) associated with the allocation. It can be set to 0." ::= { agentDhcp6ServerPoolAllocationEntry 6 } agentDhcp6ServerPoolAllocationValidLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'." ::= { agentDhcp6ServerPoolAllocationEntry 7 } agentDhcp6ServerPoolAllocationPreferLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the preferred lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the valid lifetime value." ::= { agentDhcp6ServerPoolAllocationEntry 8 } agentDhcp6ServerPoolAllocationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When an allocation is created, row-status becomes 'active'. If row-status for an allocation is set to 'invalid', the corresponding allocation gets deleted. " ::= { agentDhcp6ServerPoolAllocationEntry 9 } --************************************************************************************** -- agentDhcp6InterfaceGroup -> contains MIB objects for configuring and displaying -- interfaces in DHCPv6 server/relay mode. -- --************************************************************************************** agentDhcp6InterfaceGroup OBJECT IDENTIFIER ::= { fastPathDHCP6ServerPrivate 3 } agentDhcp6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server/Relay interface entries." ::= { agentDhcp6InterfaceGroup 1 } agentDhcp6InterfaceEntry OBJECT-TYPE SYNTAX AgentDhcp6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for DHCPv6 server or relay functionality on an interface." INDEX { agentDhcp6InterfaceIndex } ::= { agentDhcp6InterfaceTable 1 } AgentDhcp6InterfaceEntry ::= SEQUENCE { agentDhcp6InterfaceIndex Ipv6IfIndex, agentDhcp6InterfaceMode INTEGER, agentDhcp6InterfaceServerPoolName DisplayString, agentDhcp6InterfaceServerPreference Unsigned32, agentDhcp6InterfaceRelayAddress Ipv6Address, agentDhcp6InterfaceRelayInterface Ipv6IfIndexOrZero, agentDhcp6InterfaceRemoteIdentifier DisplayString, agentDhcp6InterfaceOptionFlags BITS } agentDhcp6InterfaceIndex OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This specifies the ifIndex of the DHCPv6 interface" ::= { agentDhcp6InterfaceEntry 1 } agentDhcp6InterfaceMode OBJECT-TYPE SYNTAX INTEGER { disable(0), server(1), relay(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies whether an interface is in DHCPv6 Server or Relay mode. Setting the mode to 'disable' (0) effectively un-configures the interface." ::= { agentDhcp6InterfaceEntry 2 } agentDhcp6InterfaceServerPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a DHCPv6 Server pool name, which exists within the agentDhcp6ServerPoolConfigTable. This parameter is only meaningful when the interface is in DHCPv6 server mode." ::= { agentDhcp6InterfaceEntry 3 } agentDhcp6InterfaceServerPreference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a DHCPv6 Server preference value, which is used by DHCPv6 clients to choose betweeen servers. This parameter is only meaningful when the interface is in DHCPv6 server mode." ::= { agentDhcp6InterfaceEntry 4 } agentDhcp6InterfaceRelayAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This specifies the IPv6 address of a DHCPv6 relay server, to which DHCPv6 messages receivd on this interface will be relayed. If this is specified as global IPv6 address, then agentDhcp6ServerInterfaceRelayInterface is not required to be configured. However, if the address is specified as a link-local or multicast address, then agentDhcp6ServerInterfaceRelayInterface is required. This parameter is only meaningful when the interface is in DHCPv6 relay mode." ::= { agentDhcp6InterfaceEntry 5 } agentDhcp6InterfaceRelayInterface OBJECT-TYPE SYNTAX Ipv6IfIndexOrZero MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This specifies the IPv6 ifindex of a interface to reach a DHCPv6 relay server, to which DHCPv6 messages received on this interface will be relayed. This parameter is only meaningful when the interface is in DHCPv6 relay mode." ::= { agentDhcp6InterfaceEntry 6 } agentDhcp6InterfaceRemoteIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the Relay Agent Information Option 'remote-id' sub-option to be attached to DHCPv6 messages being relayed on this interface. There exists a special reserved value of 'duid-ifid', which causes the remote-id value to be derived from the local DHCPv6 Server DUID and the interface ifindex. Otherwise, the string defined here is used as the remote-id value. This parameter is only meaningful when the interface is in DHCPv6 relay mode." ::= { agentDhcp6InterfaceEntry 7 } agentDhcp6InterfaceOptionFlags OBJECT-TYPE SYNTAX BITS { rapid-commit(0), allow-unicast(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies a bitmask field for various DHCPv6 options. Currently, only the 'rapid-commit' option is available, which is only meaningful when the interface is in DHCPv6 Server mode. Setting this parameter to 0 effectively clears any configured option flags on the interface." ::= { agentDhcp6InterfaceEntry 8 } agentDhcp6InterfaceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server/Relay interface statistics" ::= { agentDhcp6InterfaceGroup 2 } agentDhcp6InterfaceStatsEntry OBJECT-TYPE SYNTAX AgentDhcp6InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for DHCPv6 server or relay statistics on an interface." INDEX { agentDhcp6InterfaceStatsIndex } ::= { agentDhcp6InterfaceStatsTable 1 } AgentDhcp6InterfaceStatsEntry ::= SEQUENCE { agentDhcp6InterfaceStatsIndex Ipv6IfIndex, agentDhcp6InterfaceMalformedMessagesReceived Counter32, agentDhcp6InterfaceDiscardedMessages Counter32, agentDhcp6InterfaceSOLICITMessagesReceived Counter32, agentDhcp6InterfaceREQUESTMessagesReceived Counter32, agentDhcp6InterfaceCONFIRMMessagesReceived Counter32, agentDhcp6InterfaceRENEWMessagesReceived Counter32, agentDhcp6InterfaceREBINDMessagesReceived Counter32, agentDhcp6InterfaceRELEASEMessagesReceived Counter32, agentDhcp6InterfaceDECLINEMessagesReceived Counter32, agentDhcp6InterfaceINFORMREQMessagesReceived Counter32, agentDhcp6InterfaceRELAYREPLYMessagesReceived Counter32, agentDhcp6InterfaceRELAYFORWMessagesReceived Counter32, agentDhcp6InterfaceADVERTISEMessagesSent Counter32, agentDhcp6InterfaceREPLYMessagesSent Counter32, agentDhcp6InterfaceRECONFIGUREMessagesSent Counter32, agentDhcp6InterfaceRELAYREPLYMessagesSent Counter32, agentDhcp6InterfaceRELAYFORWMessagesSent Counter32, agentDhcp6InterfaceClearStatistics INTEGER } agentDhcp6InterfaceStatsIndex OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This specifies the ifindex of the DHCPv6 interface" ::= { agentDhcp6InterfaceStatsEntry 1 } agentDhcp6InterfaceMalformedMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed (truncated or corrupt) messages that have been received on the interface" ::= { agentDhcp6InterfaceStatsEntry 2 } agentDhcp6InterfaceDiscardedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded messages on the interface." ::= { agentDhcp6InterfaceStatsEntry 3 } agentDhcp6InterfaceSOLICITMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type SOLICIT that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 4 } agentDhcp6InterfaceREQUESTMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REQUEST that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 5 } agentDhcp6InterfaceCONFIRMMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type CONFIRM that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 6 } agentDhcp6InterfaceRENEWMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RENEW that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 7 } agentDhcp6InterfaceREBINDMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REBIND that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 8 } agentDhcp6InterfaceRELEASEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELEASE that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 9 } agentDhcp6InterfaceDECLINEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type DECLINE that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 10 } agentDhcp6InterfaceINFORMREQMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type INFORMATION-REQUEST that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 11 } agentDhcp6InterfaceRELAYREPLYMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-REPLY that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 12 } agentDhcp6InterfaceRELAYFORWMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-FORWARD that have been received on the interface." ::= { agentDhcp6InterfaceStatsEntry 13 } agentDhcp6InterfaceADVERTISEMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type ADVERTISE that have been sent on the interface." ::= { agentDhcp6InterfaceStatsEntry 14 } agentDhcp6InterfaceREPLYMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type REPLY that have been sent on the interface." ::= { agentDhcp6InterfaceStatsEntry 15 } agentDhcp6InterfaceRECONFIGUREMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RECONFIGURE that have been sent on the interface." ::= { agentDhcp6InterfaceStatsEntry 16 } agentDhcp6InterfaceRELAYREPLYMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-REPLY that have been sent on the interface." ::= { agentDhcp6InterfaceStatsEntry 17 } agentDhcp6InterfaceRELAYFORWMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCPv6 messages of type RELAY-FORWARD that have been sent on the interface." ::= { agentDhcp6InterfaceStatsEntry 18 } agentDhcp6InterfaceClearStatistics OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Clears the DHCPv6 statistics on the interface." DEFVAL { disable } ::= { agentDhcp6InterfaceStatsEntry 19 } agentDhcp6RelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6RelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Relay entries." ::= { agentDhcp6InterfaceGroup 3 } agentDhcp6RelayEntry OBJECT-TYPE SYNTAX AgentDhcp6RelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for DHCPv6 relay functionality on an interface." INDEX { agentDhcp6InterfaceIndex, agentDhcp6RelayAddress, agentDhcp6RelayInterface } ::= { agentDhcp6RelayTable 1 } AgentDhcp6RelayEntry ::= SEQUENCE { agentDhcp6RelayAddress Ipv6Address, agentDhcp6RelayInterface Ipv6IfIndexOrZero, agentDhcp6RelayRowStatus RowStatus } agentDhcp6RelayAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the IPv6 address of a DHCPv6 relay server, to which DHCPv6 messages received on this interface will be relayed. If this is specified as global IPv6 address, then agentDhcp6ServerInterfaceRelayInterface is not required to be configured. However, if the address is specified as a link-local or multicast address, then agentDhcp6ServerInterfaceRelayInterface is required. This parameter is only meaningful when the interface is in DHCPv6 relay mode." ::= { agentDhcp6RelayEntry 1 } agentDhcp6RelayInterface OBJECT-TYPE SYNTAX Ipv6IfIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the IPv6 ifindex of a interface to reach a DHCPv6 relay server, to which DHCPv6 messages received on this interface will be relayed. This parameter is only meaningful when the interface is in DHCPv6 relay mode. A value of zero signifies that the relay address is a global IPv6 address and the router can evaluate the relay interface from the global Ipv6 address." ::= { agentDhcp6RelayEntry 2 } agentDhcp6RelayRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When a Relay Entry is created by applying write operation on 'agentDhcp6InterfaceRelayAddr' and 'agentDhcp6InterfaceRelayIntf', row-status becomes 'active'. If row-status for a relay entry is set to 'destroy', the corresponding Relay Entry gets deleted. " ::= { agentDhcp6RelayEntry 3 } agentDhcp6InterfaceClientStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6InterfaceClientStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Client interface statistics" ::= { agentDhcp6InterfaceGroup 4 } agentDhcp6InterfaceClientStatsEntry OBJECT-TYPE SYNTAX AgentDhcp6InterfaceClientStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for DHCPv6 client statistics on an interface." INDEX { agentDhcp6InterfaceClientStatsIndex } ::= { agentDhcp6InterfaceClientStatsTable 1 } AgentDhcp6InterfaceClientStatsEntry ::= SEQUENCE { agentDhcp6InterfaceClientStatsIndex Ipv6IfIndex, agentDhcp6InterfaceADVERTISEMessagesReceived Counter32, agentDhcp6InterfaceREPLYMessagesReceived Counter32, agentDhcp6InterfaceADVERTISEMessagesDiscarded Counter32, agentDhcp6InterfaceREPLYMessagesDiscarded Counter32, agentDhcp6InterfaceMALFORMEDMessagesReceived Counter32, agentDhcp6InterfaceTOTALMessagesReceived Counter32, agentDhcp6InterfaceSOLICITMessagesSent Counter32, agentDhcp6InterfaceREQUESTMessagesSent Counter32, agentDhcp6InterfaceRENEWMessagesSent Counter32, agentDhcp6InterfaceREBINDMessagesSent Counter32, agentDhcp6InterfaceRELEASEMessagesSent Counter32, agentDhcp6InterfaceDECLINEMessagesSent Counter32, agentDhcp6InterfaceCONFIRMMessagesSent Counter32, agentDhcp6InterfaceTOTALMessagesSent Counter32, agentDhcp6InterfaceClearClientStats INTEGER } agentDhcp6InterfaceClientStatsIndex OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This specifies the ifindex of the DHCPv6 client interface" ::= { agentDhcp6InterfaceClientStatsEntry 1 } agentDhcp6InterfaceADVERTISEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of advertisement messages that have been received on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 2 } agentDhcp6InterfaceREPLYMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reply messages that have been received on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 3 } agentDhcp6InterfaceADVERTISEMessagesDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of advertisement messages that have been discarded on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 4 } agentDhcp6InterfaceREPLYMessagesDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reply messages that have been discarded on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 5 } agentDhcp6InterfaceMALFORMEDMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed messages that have been received on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 6 } agentDhcp6InterfaceTOTALMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number messages that have been received on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 7 } agentDhcp6InterfaceSOLICITMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of solicit messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 8 } agentDhcp6InterfaceREQUESTMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 9 } agentDhcp6InterfaceRENEWMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of renew messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 10 } agentDhcp6InterfaceREBINDMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rebind messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 11 } agentDhcp6InterfaceRELEASEMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 12 } agentDhcp6InterfaceDECLINEMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of decline messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 13 } agentDhcp6InterfaceCONFIRMMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of confirm messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 14 } agentDhcp6InterfaceTOTALMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of messages that have been sent on the interface" ::= { agentDhcp6InterfaceClientStatsEntry 15 } agentDhcp6InterfaceClearClientStats OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Clears the DHCPv6 statistics on the interface." DEFVAL { disable } ::= { agentDhcp6InterfaceClientStatsEntry 16 } --************************************************************************************** -- agentDhcp6ServerBindingGroup -> contains MIB objects displaying active bindings for -- the DHCPv6 server. -- --************************************************************************************** agentDhcp6ServerBindingGroup OBJECT IDENTIFIER ::= { fastPathDHCP6ServerPrivate 4 } agentDhcp6ServerBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCPv6 Server's active binding entries." ::= { agentDhcp6ServerBindingGroup 1 } agentDhcp6ServerBindingEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server's active bindings." INDEX { agentDhcp6ServerBindingIndex } ::= { agentDhcp6ServerBindingTable 1 } -- All objects are of type read-only AgentDhcp6ServerBindingEntry ::= SEQUENCE { agentDhcp6ServerBindingIndex Unsigned32, agentDhcp6ServerBindingPrefix Ipv6AddressPrefix, agentDhcp6ServerBindingPrefixLength Integer32, agentDhcp6ServerBindingPrefixType INTEGER, agentDhcp6ServerBindingClientIdentifier DisplayString, agentDhcp6ServerBindingClientAddress Ipv6Address, agentDhcp6ServerBindingClientInterface Ipv6IfIndex, agentDhcp6ServerBindingIaid Unsigned32, agentDhcp6ServerBindingValidLifetime Unsigned32, agentDhcp6ServerBindingPreferLifetime Unsigned32, agentDhcp6ServerBindingExpiration Unsigned32 } agentDhcp6ServerBindingIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32768) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the entry in the list of the DHCPv6 server's active bindings." ::= { agentDhcp6ServerBindingEntry 1 } agentDhcp6ServerBindingPrefix OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address prefix delegated to a DHCPv6 client." ::= { agentDhcp6ServerBindingEntry 2 } agentDhcp6ServerBindingPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the number of bits that comprise the address-prefix mask length for the delegated prefix." ::= { agentDhcp6ServerBindingEntry 3 } agentDhcp6ServerBindingPrefixType OBJECT-TYPE SYNTAX INTEGER { iapd(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of prefix associated with the binding. Currently, only IA_PD type (prefix delegation) is supported." ::= { agentDhcp6ServerBindingEntry 4 } agentDhcp6ServerBindingClientIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client. " ::= { agentDhcp6ServerBindingEntry 5 } agentDhcp6ServerBindingClientAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the address for a DHCPv6 client." ::= { agentDhcp6ServerBindingEntry 6 } agentDhcp6ServerBindingClientInterface OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the interface for a DHCPv6 client." ::= { agentDhcp6ServerBindingEntry 7 } agentDhcp6ServerBindingIaid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies a identity association ID (IAID) associated with the binding." ::= { agentDhcp6ServerBindingEntry 8 } agentDhcp6ServerBindingValidLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'." ::= { agentDhcp6ServerBindingEntry 9 } agentDhcp6ServerBindingPreferLifetime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the preferred lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the valid lifetime value." ::= { agentDhcp6ServerBindingEntry 10 } agentDhcp6ServerBindingExpiration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the amount of time (in seconds) for the associated binding to expire." ::= { agentDhcp6ServerBindingEntry 11 } --************************************************************************************** -- agentDhcp6ServerConflictGroup -> contains MIB objects displaying conflicting client IPv6 -- addresses logged by the DHCPv6 server. -- --************************************************************************************** agentDhcp6ServerConflictGroup OBJECT IDENTIFIER ::= { fastPathDHCP6ServerPrivate 5 } agentDhcp6ServerConflictTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcp6ServerConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of conflicting client address maintained on the server." ::= { agentDhcp6ServerConflictGroup 1 } agentDhcp6ServerConflictEntry OBJECT-TYPE SYNTAX AgentDhcp6ServerConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a DHCPv6 server's conflicting client Ipv6 address." INDEX { agentDhcp6ServerConflictTableIndex } ::= { agentDhcp6ServerConflictTable 1 } AgentDhcp6ServerConflictEntry ::= SEQUENCE { agentDhcp6ServerConflictTableIndex Ipv6IfIndex, agentDhcp6ServerConflictPoolName DisplayString, agentDhcp6ServerConflictPoolPrefix Ipv6Address, agentDhcp6ConflictPoolPrefixLength Integer32, agentDhcp6ConflictClientDuid DisplayString, agentDhcp6ConflictClientAddress Ipv6Address, agentDhcp6ServerClearConflicts TruthValue } agentDhcp6ServerConflictTableIndex OBJECT-TYPE SYNTAX Ipv6IfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the entry in the list of the DHCPv6 server's conflict client address." ::= { agentDhcp6ServerConflictEntry 1 } agentDhcp6ServerConflictPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DHCPv6 pool." ::= { agentDhcp6ServerConflictEntry 2 } agentDhcp6ServerConflictPoolPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix pool from which client address was leased." ::= { agentDhcp6ServerConflictEntry 3 } agentDhcp6ConflictPoolPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the conflicting server pool prefix length." ::= { agentDhcp6ServerConflictEntry 4 } agentDhcp6ConflictClientDuid OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client. " ::= { agentDhcp6ServerConflictEntry 5 } agentDhcp6ConflictClientAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the conflicting client ipv6 address." ::= { agentDhcp6ServerConflictEntry 6 } agentDhcp6ServerClearConflicts OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Clears the DHCPv6 server conflict table entries." DEFVAL { false } ::= { agentDhcp6ServerConflictEntry 7 } END