-------------------------------------------------------------------------------- -- DELL REMOTE CONSOLE SWITCH (1082DS/2162DS/4322DS) TRAP MIB -- -- Copyright 2012 Dell Corporation -- -- Revision: 1.16.0 -- -- Last Modified: Thu, 23 Feb 2012 -- -------------------------------------------------------------------------------- DELLRCSG2-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS Gauge,enterprises,TimeTicks,IpAddress,Counter,NetworkAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString,PhysAddress FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; -------------------------------------------------------------------------------- -- Object Groupings -------------------------------------------------------------------------------- dell OBJECT IDENTIFIER ::= { enterprises 10418 } dellrcsg2 OBJECT IDENTIFIER ::= { dell 18 } dellrcsg2Products OBJECT IDENTIFIER ::= { dellrcsg2 21 } dellrcsg2Management OBJECT IDENTIFIER ::= { dellrcsg2 22 } -- Below is the value returned by each appliance in mib-2.system.sysObjectID -- dellrcs1082ds OBJECT IDENTIFIER ::= { dellrcsg2Products 17 } -- 10418.18.21.17 dellrcs2162ds OBJECT IDENTIFIER ::= { dellrcsg2Products 24 } -- 10418.18.21.24 dellrcs4322ds OBJECT IDENTIFIER ::= { dellrcsg2Products 26 } -- 10418.18.21.26 dellrcsg2TrapObject OBJECT IDENTIFIER ::= { dellrcsg2Management 6 } -- 1.3.6.1.4.1.10418.18.22.6 -- -- A UTF8String represents a series of UTF-8 encoded characters. UTF-8 encoding -- provides the ability to encode all characters defined in the Universal -- Multiple-Octet Coded Character Set (UCS) and all characters defined in the -- Unicode Standard. UCS is defined in international standard ISO 10646. Unicode -- encompasses a subset of UCS. See http: -- on Unicode. See RFC2279 for more information on UTF-8 encoding. -- UTF8String ::= OCTET STRING ImageFileUpgradeResultsEnum ::= INTEGER { imageUpgradeTftpNoSocket(1), -- TFTP No Socket imageUpgradeTftpConnectFailure(2), -- TFTP server TFTP connect failed imageUpgradeTftpRequestDenied(3), -- TFTP server request denied imageUpgradeTftpBadPacket(4), -- TFTP err - non-data packet received imageUpgradeTftpOOS(5), -- TFTP err - too many packets out -- of sequence imageUpgradeTftpTooBig(6), -- TFTP err - transferred data exceeds -- file size imageUpgradeTftpTimeout(7), -- TFTP err - timeout during transfer, -- retries exceeded imageUpgradeAlreadyInProgress(8), -- Update already in progress imageUpgradeCannotStart(9), -- Update thread did not start imageUpgradeMemoryError(10), -- Update memory allocation error imageUpgradeTftpProtocolError(11), -- TFTP protocol error occurred could -- not complete transfer imageUpgradeBadType(12), -- The Image type does not match the -- region (BOOT or APP) to update imageUpgradeInvalidAppDowngrade(13), -- Invalid downgrade version imageUpgradeChecksumError(14), -- Checksum Error imageUpgradeFlashError(15), -- Flash Error imageUpgradeInternalError(16), -- Internal error imageUpgradeFileNotFound(17), -- File not found imageUpgradeBadHeader(18), -- Invalid image header imageUpgradeIncompatibleHeader(19), -- Header is not compatible imageUpgradeTftpXferFail(20), -- TFTP transfer failed imageUpgradeTftpSvrNoResponse(21), -- No response from TFTP server imageUpgradeNetworkUnreachable(22), -- Network unreachable imageUpgradeSuccess(9999) -- Success } -- -- An enumeration of SIP upgrade results. -- SIPUpgradeResultsEnum ::= INTEGER { sipUpgradeNoFirmwareImage(1), -- No firmware image present sipUpgradeLostContact(2), -- Lost communication with the SIP sipUpgradeFailedRestart(3), -- The SIP did not restart after upgrade sipUpgradeFailedVerify(4), -- The SIP failed to upgrade to correct Version sipUpgradeSuccess(9999) -- Success } -------------------------------------------------------------------------------- -- Trap Object Group (dellrcsg2TrapObject) 1.3.6.1.4.1.10418.18.22.6 -- -- The following objects are implemented only for the generation of -- TRAPs. The objects are sent in traps and are not accessible in -- any other way. -------------------------------------------------------------------------------- dellrcsg2TrapObjectUserName OBJECT-TYPE SYNTAX UTF8String ( SIZE (3..16) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the name of the user for which the trap condition occured. If the trap condition occurred as a result of activity on the local port (OSD), then the value of this object will be the following string: Local User " ::= { dellrcsg2TrapObject 1 } dellrcsg2TrapObjectTargetUserName OBJECT-TYPE SYNTAX UTF8String ( SIZE (3..16) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the name of the target user for which a trap condition occurred. " ::= { dellrcsg2TrapObject 2 } dellrcsg2TrapObjectImageType OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..64) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the type of software image for which the trap condition occured. " ::= { dellrcsg2TrapObject 3 } dellrcsg2TrapObjectImageNewVersion OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the version of the new software image the RCS is being upgraded to. " ::= { dellrcsg2TrapObject 4 } dellrcsg2TrapObjectImageCurrentVersion OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the version of the software image that the RCS is currently running. " ::= { dellrcsg2TrapObject 5 } dellrcsg2TrapObjectSessionIdentifier OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the session for which the trap condition occurred. The value will be the name of a target device if the target device name is known, otherwise the value will be the connection path to a target device. If the value is a connection path it will have the following format: SIP i:Channel c Where i is the ID of the SIP, and c is the tiered switch channel number (0 if there is no switch in the path). " ::= { dellrcsg2TrapObject 6 } dellrcsg2TrapObjectSIPId OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the SIP for which the trap condition occurred. " ::= { dellrcsg2TrapObject 7 } dellrcsg2TrapObjectTieredSwitchName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..15) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the tiered switch for which the trap condition occurred. " ::= { dellrcsg2TrapObject 8 } dellrcsg2TrapObjectOldTieredSwitchName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..15) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the old name of a tiered switch whose name was changed. " ::= { dellrcsg2TrapObject 9 } dellrcsg2TrapObjectTargetDeviceName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..15) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the target device for which the trap condition occurred. " ::= { dellrcsg2TrapObject 10 } dellrcsg2TrapObjectOldTargetDeviceName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..15) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the old name of a target device whose name was changed. " ::= { dellrcsg2TrapObject 11 } dellrcsg2TrapObjectFileName OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..255) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the name of a file for which the trap condition occurred. " ::= { dellrcsg2TrapObject 12 } dellrcsg2TrapObjectLockReason OBJECT-TYPE SYNTAX UTF8String( SIZE (0..64) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to explain the reason for which a user account has been locked. " ::= { dellrcsg2TrapObject 13 } dellrcsg2TrapObjectUnlockReason OBJECT-TYPE SYNTAX UTF8String( SIZE (0..64) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to explain the reason for which a user account has been unlocked. " ::= { dellrcsg2TrapObject 14 } dellrcsg2TrapObjectUserAddress OBJECT-TYPE SYNTAX DisplayString( SIZE (0..40) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the user address for which a trap condition occurred. For a remote user, the value is the IPv4 or IPv6 IP address. For a local user, the value is the Local Port of the user. " ::= { dellrcsg2TrapObject 15 } dellrcsg2TrapObjectSIPImageUpgradeResult OBJECT-TYPE SYNTAX SIPUpgradeResultsEnum ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report the result of a SIP image upgrade. " ::= { dellrcsg2TrapObject 16 } dellrcsg2TrapObjectTypeOfImage OBJECT-TYPE SYNTAX INTEGER { boot(1), app(2) } ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report the type of software image for which the trap condition occurred. " ::= { dellrcsg2TrapObject 17 } dellrcsg2TrapObjectVirtualMediaDriveAccessMode OBJECT-TYPE SYNTAX INTEGER { readonly(1), readwrite(2) } ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report the access mode associated with a virtual drive for which the trap condition occurred. " ::= { dellrcsg2TrapObject 18 } dellrcsg2TrapObjectVirtualMediaDriveType OBJECT-TYPE SYNTAX INTEGER { floppyMemoryKey(1), cdDvdRom(2), generic(3) } ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report the type associated with a virtual drive for which the trap condition occurred. " ::= { dellrcsg2TrapObject 19 } dellrcsg2TrapObjectImageFileUpgradeResult OBJECT-TYPE SYNTAX ImageFileUpgradeResultsEnum ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report the results of a TFTP or ASMP image upgrade." ::= { dellrcsg2TrapObject 20 } dellrcsg2TrapObjectPduDevicePort OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the RCS port that the power device is attached to for which the trap condition occurred. " ::= { dellrcsg2TrapObject 21 } dellrcsg2TrapObjectPduOutlet OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the power device outlet number for which the trap condition occurred. " ::= { dellrcsg2TrapObject 22 } dellrcsg2TrapObjectOldName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..64) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the old name of a port or power device outlet for which the trap condition occurred. " ::= { dellrcsg2TrapObject 23 } dellrcsg2TrapObjectItemName OBJECT-TYPE SYNTAX UTF8String ( SIZE (0..64) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the name of a port or power device outlet for which the trap condition occurred. " ::= { dellrcsg2TrapObject 24 } dellrcsg2TrapObjectPduDeviceInlet OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the inlet of a power device for which the trap condition occurred. " ::= { dellrcsg2TrapObject 25 } dellrcsg2TrapObjectPduDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the power device number that is attached to a RCS port for which the trap condition occurred. " ::= { dellrcsg2TrapObject 26 } dellrcsg2TrapObjectInputPort OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the RCS input port number for which the trap condition occurred. An input port is defined here as an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device. The values range from 1 to the maximum number of ARI ports. " ::= { dellrcsg2TrapObject 27 } dellrcsg2TrapObjectOldInputPort OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the old RCS input port number for which the trap condition occurred. An input port is defined here as an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device. The values range from 1 to the maximum number of ARI ports. " ::= { dellrcsg2TrapObject 28 } dellrcsg2TrapObjectPowerSupply OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..5) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the power supply for which the trap condition occurred. " ::= { dellrcsg2TrapObject 29 } dellrcsg2TrapObjectPreviousScreenResolution OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the previous screen resolution of the target target device. " ::= { dellrcsg2TrapObject 30 } dellrcsg2TrapObjectCurrentScreenResolution OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..32) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the current screen resolution of the target server. " ::= { dellrcsg2TrapObject 31 } dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (12..5122) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to report server status changes. This object will report the status change of multiple servers (connection paths) in an aggregated encoding format as indicated below. Note that on bootup the RCS will send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing the status of all connection paths in the RCS. Thereafter the RCS will send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing only the connection paths whose status has changed. This object is composed of two sections, which are the header section and the connection path section. The header section provides version information and is the first 2 bytes of this object. The connection path section provides information on each of the connection paths and is defined in the bytes following the header. Header Section -------------- Byte 1 = Start indicator for the header section. The value of the start indicator is always zero. The value of the start indicator provides means for management applications to determine that this object has a header section. All previous implementations of this object have a non-zero value in the first byte. Byte 2 = Version of the aggregate object. The version provides means to identify the format/structure of this aggregate object. The format of the aggregate object, as described here, is identified with a value of 3 for the version. Connection Path Section ----------------------- The connection path section is composed of 1 or more connection paths. The information for each connection path is packed into 10 bytes as follows: Byte 1 = The RCS input port number associated with this connection path. The input port is an ARI port that interfaces the data traffic coming from or going directly or indirectly to a target device or a power device. Note that a power device will report the port number as 100 + the power device port number. For the first power device port, Byte 1 will report 101 for the power device. This will avoid potential port conflicts for ARI and power device ports. In the event that additional power device ports are available, the number will reflect the power device port number (i.e. 101, 102, etc.) Byte 2 = The tiered switch channel number associated with this connection path. The value will be 0 if a switch channel is not associated with this connection path. For power devices, this Byte will represent the power device number. Byte 3 will contain the outlet number for this connection path. Byte 3 ~ 8 = The EID of the SIP associated with this connection path. Each byte in this field will encode two digits of the SIP's EID number. For example, if the actual EID number on the label attached to a SIP is 520255-0346DC then bytes 3 through 8 would contain the following hex values: Byte 3 = 0x52 Byte 4 = 0x02 Byte 5 = 0x55 Byte 6 = 0x03 Byte 7 = 0x46 Byte 8 = 0xDC Note that the dash character is not represented in the encoded value. For a power device, the first byte (Byte 3) will represent the outlet number and the remaining 5 bytes (Byte 4-8) will be 0. Byte 9 ~ the left most 4 bits = The left most four bits of the 9th byte shall be used to encode / decode the following integer value to represent the power status of a connected server or the power status of a power device outlet. One of the following values can be reported: 1 = Off - The connection path does not have power, which could be the result of the following situation: the SIP is unplugged or the SIP is plugged in but receives no power from the target device. 2 = On - The connection path has power. Byte 9 ~ the right most 4 bits = The right most four bits of the 9th byte shall be used to encode / decode the following integer value to represent the viewer session status of a connection path. For a power device or power device outlet, this value is always 1 since viewer sessions are not supported. One of the following values can be reported: 1 = Idle - There is not a viewer session active on this connection path. 2 = Active - There is an active viewer session on this connection path. 3 = Blocked - The connection path is blocked meaning a viewer session cannot be established to this connection path because of another viewer session is currently using a resource required by this connection path in order to establish a connection path. A viewer session cannot be blocked by a virtual media session. Byte 10 ~ the left most 4 bits = The left most four bits of the 10th byte shall be used to encode / decode the following integer value to represent the virtual media session status of a connection path. For a power device or power device outlet, this value is always 1 since virtual media sessions are not supported. One of the following values can be reported: 1 = Idle - There is not a virtual media session active on this connection path. 2 = Active - There is a virtual media session on this connection path. 3 = Blocked - The connection path is blocked meaning a virtual media session cannot be established to this connection path because of another virtual media session is currently using a resource required by this connection path in order to establish a connection path. A virtual media session cannot be blocked by a viewer session. Byte 10 ~ the right most 4 bits = The right most four bits of the 10th byte shall be used for future use and they will have a value of 0. Every connection path will be packed into this object in 10 byte increments one after the other. The connection paths do not have to be packed in any specific order. Note that the size of this object could conceivably be as large as shown in the following calculation with these assumptions. - 24 channel switch connected to each port of the RCS - 4 power devices connected to RCS, each having 32 outlets (((16 ports X 24 channels) + (4 power devices X 32 power device outlets)) X 10 bytes) + (2 byte Header) = 5122. " ::= { dellrcsg2TrapObject 32 } dellrcsg2TrapObjectPduDeviceCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the circuit of a power device for which the trap condition occurred. " ::= { dellrcsg2TrapObject 33 } dellrcsg2TrapObjectSessionType OBJECT-TYPE SYNTAX DisplayString( SIZE (0..16) ) ACCESS not-accessible STATUS mandatory --% AVAILABILITY public DESCRIPTION "This object is sent in a trap to identify the session type for which a trap condition occurred. The value is KVM for a KVM session, or Serial for a Serial session. " ::= { dellrcsg2TrapObject 34 } -------------------------------------------------------------------------------- -- Enterprise Traps -------------------------------------------------------------------------------- dellrcsg2RebootStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName } DESCRIPTION "The RCS is in the process of rebooting. The name of the user who initiated the reboot is contained in dellrcsg2TrapObjectUserName. " --#SUMMARY "The RCS is rebooting. Command issued by user: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY KERNEL --#CATEGORY "Status Events" --% TrapTypeEnum=5 ::= 1 dellrcsg2UserLoginTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName } DESCRIPTION "A user logged into the RCS. The name of the user who logged in is contained in dellrcsg2TrapObjectUserName. " --#SUMMARY "User logged into the RCS. User: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=6 ::= 2 dellrcsg2UserLogoutTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName } DESCRIPTION "A user logged out of the RCS. The name of the user who logged out is contained in dellrcsg2TrapObjectUserName. " --#SUMMARY "User logged out of the RCS. User: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=7 ::= 3 dellrcsg2TargetSessionStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectUserAddress, dellrcsg2TrapObjectSessionType } DESCRIPTION "A target session has started. This may be a serial or KVM session, depending on the type of target. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. " --#SUMMARY "Target session started. User: %s. Target device: %s. Address: %s. Type: %s." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=8 ::= 4 dellrcsg2TargetSessionStoppedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectUserAddress, dellrcsg2TrapObjectSessionType } DESCRIPTION "A target session has stoppped. This may be a serial or KVM session, depending on the type of target. The name of the user who was connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. " --#SUMMARY "Target session stopped. User: %s. Target device: %s. Address: %s. Type: %s." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=9 ::= 5 dellrcsg2TargetSessionTerminatedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName, dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectUserAddress, dellrcsg2TrapObjectSessionType } DESCRIPTION "A target session has been terminated by another user. This may be a serial or KVM session, depending on the type of target. The name of the user who terminated the session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The name of the user who was terminated from the session is contained in dellrcsg2TrapObjectTargetUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. The session type is contained in dellrcsg2TrapObjectSessionType. " --#SUMMARY "Target session terminated. Commanded by user: %s. User: %s. Target device: %s. Address: %s. Type: %s." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=10 ::= 6 dellrcsg2LocalPortSessionStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSessionIdentifier } DESCRIPTION "A local port target session has started. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. " --#SUMMARY "Local port target session started. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=11 ::= 7 dellrcsg2LocalPortSessionStoppedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSessionIdentifier } DESCRIPTION "A local port target session has stopped. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. " --#SUMMARY "Local port target session stopped. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=12 ::= 8 dellrcsg2LocalPortSessionTerminatedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectSessionIdentifier } DESCRIPTION "A local port target session has been terminated by another user. The name of the user who terminated the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. This Trap is deprecated and is no longer used. " --#SUMMARY "Local Port Target session terminated. Command issued by user: %s. Target device: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=13 ::= 9 dellrcsg2ImageFileUpgradeStarted TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectFileName, dellrcsg2TrapObjectImageNewVersion, dellrcsg2TrapObjectImageCurrentVersion } DESCRIPTION "The RCS has started an image upgrade. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. The version of the image that the RCS is upgrading to is contained in dellrcsg2TrapObjectImageNewVersion. The version of the image that the RCS is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. " --#SUMMARY "Image upgrade started. Command issued by user: %s. File: %s. New version: %s. Current version: %s" --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=14 ::= 10 dellrcsg2ImageFileUpgradeResultsTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectImageFileUpgradeResult } DESCRIPTION "The result of an image upgrade." --#SUMMARY "Image upgrade result: %d" --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=15 ::= 11 dellrcsg2UserAddedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName } DESCRIPTION "A new user has been added to the local user database. The name of the user who added the new user is contained in dellrcsg2TrapObjectUserName. The name of the new user is contained in dellrcsg2TrapObjectTargetUserName. " --#SUMMARY "New user added to local user database. Command issued by user: %s. New user: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Configuration Events" --% TrapTypeEnum=16 ::= 12 dellrcsg2UserDeletedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName } DESCRIPTION "A user has been deleted from the local user database. The name of the user who deleted the user is contained in dellrcsg2TrapObjectUserName. The name of the user who was deleted is contained in dellrcsg2TrapObjectTargetUserName. " --#SUMMARY "User deleted from local user database. Command issued by user: %s. Deleted user: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Configuration Events" --% TrapTypeEnum=17 ::= 13 dellrcsg2UserModifiedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName } DESCRIPTION "A user was modified. The name of the user who modified the user is contained in dellrcsg2TrapObjectUserName. The name of the user who was modified is contained in dellrcsg2TrapObjectTargetUserName. " --#SUMMARY "User modified in local user database. Command issued by user: %s. Modified user: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Configuration Events" --% TrapTypeEnum=18 ::= 14 dellrcsg2UserLockedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetUserName, dellrcsg2TrapObjectLockReason } DESCRIPTION "A user account has been locked. The name of the user who was locked is contained in dellrcsg2TrapObjectTargetUserName. The reason for which the user account has been locked is contained in dellrcsg2TrapObjectLockReason. " --#SUMMARY "User account has been locked. Locked user: %s. Reason: %s" --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=19 ::= 15 dellrcsg2UserUnlockedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName, dellrcsg2TrapObjectUnlockReason } DESCRIPTION "A user account has been unlocked. The name of the user who unlocked the user is contained in dellrcsg2TrapObjectUserName. When the user account is unlocked by a RCS reboot or by the expiration of the lockout period (as specified in the dellrcsg2TrapObjectUnlockReason object), the name of the user will be blank. The name of the user who was unlocked is contained in dellrcsg2TrapObjectTargetUserName. The reason for which the user account has been unlocked is contained in dellrcsg2TrapObjectUnlockReason. " --#SUMMARY "User account has been unlocked. Command issued by user: %s. Unlocked user: %s. Reason: %s" --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=20 ::= 16 dellrcsg2UserAuthenticationFailureTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName } DESCRIPTION "A user failed to authenticate with the RCS. The name of the user who failed to authenticate is contained in dellrcsg2TrapObjectUserName. " --#SUMMARY "User authentication failed with the RCS. User: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=21 ::= 17 dellrcsg2SIPAddedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSIPId } DESCRIPTION "A SIP was added. The ID of the SIP which was added is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "SIP added. SIP ID: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=22 ::= 18 dellrcsg2SIPRemovedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSIPId } DESCRIPTION "A SIP was removed. The ID of the SIP which was removed is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "SIP removed. SIP ID: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=23 ::= 19 dellrcsg2SIPMovedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSIPId, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectInputPort, dellrcsg2TrapObjectOldInputPort } DESCRIPTION "A SIP was moved. The ID of the SIP which was moved is contained in dellrcsg2TrapObjectSIPId. The name of the target device attached to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The input port number on the RCS that the SIP is now connected to is contained in dellrcsg2TrapObjectInputPort. The input port number on the RCS that the SIP was previously connected to is contained in dellrcsg2TrapObjectOldInputPort. " --#SUMMARY "SIP moved. SIP ID: %s." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=24 ::= 20 dellrcsg2TargetDeviceNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldTargetDeviceName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId } DESCRIPTION "The name of a server has changed. The previous name of the server is contained in dellrcsg2TrapObjectOldTargetDeviceName. The new name of the server is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the server is attached to is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "Target device name changed. Old name: %s. New name: %s. Attached to SIP: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=25 ::= 21 dellrcsg2TieredSwitchAddedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTieredSwitchName, dellrcsg2TrapObjectSIPId } DESCRIPTION "A tiered switch was added. The name of the switch which was added is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch was added to is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "Tiered switch added. Tiered switch name: %s. Attached to SIP: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=26 ::= 22 dellrcsg2TieredSwitchRemovedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTieredSwitchName, dellrcsg2TrapObjectSIPId } DESCRIPTION "A tiered switch was removed. The name of the switch which was removed is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch was attached to is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "Tiered switch removed. Tiered switch name: %s. Was attached to SIP: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=27 ::= 23 dellrcsg2TieredSwitchNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldTieredSwitchName, dellrcsg2TrapObjectTieredSwitchName, dellrcsg2TrapObjectSIPId } DESCRIPTION "The name of a tiered switch has changed. The previous name of the tiered switch is contained in dellrcsg2TrapObjectOldTieredSwitchName. The new name of the tiered switch is contained in dellrcsg2TrapObjectTieredSwitchName. The ID of the SIP the switch is attached to is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "Tiered switch name changed. Old name: %s. New name: %s. Attached to SIP: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=28 ::= 24 dellrcsg2ConfigurationFileLoadedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectFileName } DESCRIPTION "The RCS has loaded a configuration file. The name of the user who commanded the RCS to load the configuration file is contained in dellrcsg2TrapObjectUserName. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. " --#SUMMARY "Configuration file loaded in the RCS. Command issued by user: %s. Name of file loaded: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=29 ::= 25 dellrcsg2UserDatabaseFileLoadedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectFileName } DESCRIPTION "The RCS has loaded a user database file. The name of the user who commanded the RCS to load the user database file is contained in dellrcsg2TrapObjectUserName. The URL of the file that was loaded is contained in dellrcsg2TrapObjectFileName. " --#SUMMARY "User database file loaded in the RCS. Command issued by user: %s. Name of file loaded: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Configuration Events" --% TrapTypeEnum=30 ::= 26 dellrcsg2CaCertificateLoaded TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName } DESCRIPTION "A user has loaded a new CA Certificate in the RCS. The name of the user who loaded the certificate is contained in dellrcsg2TrapObjectUserName. " --#TYPE "CA Certificate has been updated" --#SUMMARY "CA Certificate has been updated, by User: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=31 ::= 27 -- -- SIP Update Traps -- dellrcsg2SIPImageUpgradeStarted TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTypeOfImage, dellrcsg2TrapObjectImageNewVersion, dellrcsg2TrapObjectImageCurrentVersion, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId } DESCRIPTION "A software image upgrade has started on a SIP. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image being upgraded is contained in dellrcsg2TrapObjectSIPTypeOfImage. The software image version the SIP is upgrading to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the SIP is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. The name of the server connected to the SIP being upgraded is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP being upgraded is contained in dellrcsg2TrapObjectSIPId " --#SUMMARY "SIP image upgrade started. Command issued by user: %s. Image type: %d. New version: %s. Current version: %s. Target device: %s. SIP ID: %s." --#ARGUMENTS { 0, 1, 2, 3, 4, 5 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=32 ::= 28 dellrcsg2SIPImageUpgradeResultTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSIPImageUpgradeResult, dellrcsg2TrapObjectTargetUserName, dellrcsg2TrapObjectTypeOfImage, dellrcsg2TrapObjectImageNewVersion, dellrcsg2TrapObjectImageCurrentVersion, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId } DESCRIPTION "The result of a SIP software image upgrade. The image upgrade result is contained in dellrcsg2TrapObjectSIPImageUpgradeResult. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image the upgrade result is for is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the SIP attempted to upgrade to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the SIP is running is contained in dellrcsg2TrapObjectImageCurrentVersion. If the software image upgrade was successful then this version will match the version reported in dellrcsg2TrapObjectImageNewVersion. The name of the server connected to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the result is for is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "SIP image upgrade result. Result: %d. Upgrade was started by user: %s. Upgrade image type: %d. Upgrade version: %s. Running version: %s. Target device: %s. SIP ID: %s." --#ARGUMENTS { 0, 1, 2, 3, 4, 5, 6 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=33 ::= 29 dellrcsg2SIPRestartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId } DESCRIPTION "A SIP has restarted. A SIP will restart after a SIP image upgrade completes. The name of the server connected to the SIP is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP that restarted is for is contained in dellrcsg2TrapObjectSIPId. " --#SUMMARY "SIP restarted. Target device: %s. SIP ID: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=34 ::= 30 -- -- Virtual Media Traps -- dellrcsg2VirtualMediaSessionStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A Virtual Media session to a server has started. A target session to the server must have been established by the same user prior to starting the VM session. The name of the user who connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the target session is using is contained in dellrcsg2TrapObjectSIPId. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media session started. User: %s. Target device: %s. SIP: %s. Address: %s." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=35 ::= 31 dellrcsg2VirtualMediaSessionStoppedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A virtual media session to a server has stopped. The name of the user who was connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media session stopped. User: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=36 ::= 32 dellrcsg2VirtualMediaSessionTerminatedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if a remote session was terminated or preempted from the OSCAR interface and OSCAR authentication is disabled. The name of the user who was terminated or preempted from the VM session is contained in dellrcsg2TrapObjectTargetUserName. The name of the server the user was connected to contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media session terminated. Command issued by user: %s. Terminated user: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=37 ::= 33 dellrcsg2VirtualMediaSessionReservedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A user established a reserved virtual media session. The name of the user who has established a reserved virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media session has been reserved. User: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=38 ::= 34 dellrcsg2VirtualMediaSessionUnreservedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A user established a non-reserved virtual media session. The name of the user who has established a non-reserved virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "User has established a non-reserved virtual media session. User: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=39 ::= 35 dellrcsg2VirtualMediaDriveMapped TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectVirtualMediaDriveType, dellrcsg2TrapObjectVirtualMediaDriveAccessMode, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A virtual media drive has been mapped. The name of the user who has established the virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The type of drive that has been mapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been mapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media has been mapped. User: %s. Target device: %s Type: %d. Access Mode: %d. Address: %s." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=40 ::= 36 dellrcsg2VirtualMediaDriveUnmapped TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectVirtualMediaDriveType, dellrcsg2TrapObjectVirtualMediaDriveAccessMode, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A virtual media drive has been unmapped. The name of the user who has established the virtual media session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Virtual media has been unmapped. User: %s. Target device: %s Type: %d. Access Mode: %d. Address: %s." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=41 ::= 37 dellrcsg2LocalPortVirtualMediaSessionStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectSIPId } DESCRIPTION "A local user has started a Virtual Media session to a server. A target session to the server must have been established by a local user prior to starting the VM session. The name of the user who connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user connected to is contained in dellrcsg2TrapObjectTargetDeviceName. The ID of the SIP the target session is using is contained in dellrcsg2TrapObjectSIPId. This Trap is deprecated and is no longer used. " --#SUMMARY "Local virtual media session started. User: %s. Target device: %s. SIP: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=42 ::= 38 dellrcsg2LocalPortVirtualMediaSessionStoppedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName } DESCRIPTION "A local user has stopped a Virtual Media session to a server. The name of the user who was connected to the VM session is contained in dellrcsg2TrapObjectUserName. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. " --#SUMMARY "Local virtual media session stopped. User: %s. Target device: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=43 ::= 39 dellrcsg2LocalPortVirtualMediaSessionTerminatedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName } DESCRIPTION "A local virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The name of the server the user was connected to contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. " --#TYPE "Local Port Virtual Media Session Terminated" --#SUMMARY "Local Port Virtual Media session terminated. Command issued by user: %s. Target device: %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=44 ::= 40 dellrcsg2LocalPortVirtualMediaDriveMapped TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectVirtualMediaDriveType, dellrcsg2TrapObjectVirtualMediaDriveAccessMode } DESCRIPTION "A user on the local port has mapped a virtual media drive to the server. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. This Trap is deprecated and is no longer used. " --#TYPE "Local Port Virtual Media Drive Mapped Trap" --#SUMMARY "Virtual Media Drive Mapped on the local port. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=45 ::= 41 dellrcsg2LocalPortVirtualMediaDriveUnmapped TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectVirtualMediaDriveType, dellrcsg2TrapObjectVirtualMediaDriveAccessMode } DESCRIPTION "A user on the local port has unmapped a virtual media drive to the server. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The type of drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in dellrcsg2TrapObjectVirtualMediaDriveAccessMode. This Trap is deprecated and is no longer used. " --#TYPE "Local Port Virtual Media Drive Unmapped Trap" --#SUMMARY "Virtual Media Drive Unmapped on the local port. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=46 ::= 42 dellrcsg2LocalPortVirtualMediaSessionReservedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName } DESCRIPTION "A local user has reserved a virtual media session. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. " --#TYPE "Local Port Virtual Media Session Reserved" --#SUMMARY "Local Port virtual media session has been reserved. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=47 ::= 43 dellrcsg2LocalPortVirtualMediaSessionUnreservedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName } DESCRIPTION "A user has unreserved a local virtual media session. The name of the server the user was connected to is contained in dellrcsg2TrapObjectTargetDeviceName. This Trap is deprecated and is no longer used. " --#TYPE "Local Port Virtual Media Session Unreserved" --#SUMMARY "Local Port virtual media session has been unreserved. Target device: %s." --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=48 ::= 44 dellrcsg2ScreenResolutionChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPreviousScreenResolution, dellrcsg2TrapObjectCurrentScreenResolution, dellrcsg2TrapObjectSessionIdentifier } DESCRIPTION "The screen resolution of a server was changed. The name of the user who changed the screen resolution is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if the target session controlling the server was started from the local interface and local authentication is disabled. The name of the server the screen resolution was changed on is contained in dellrcsg2TrapObjectTargetDeviceName. The previous screen resolution is contained in dellrcsg2TrapObjectPreviousScreenResolution. The new screen resolution is contained in dellrcsg2TrapObjectCurrentScreenResolution. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. " --#SUMMARY "Screen resolution changed. User: %s. Target device: %s. Previous Resolution: %s. New Resolution: %s. Session: %s." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=49 ::= 45 dellrcsg2AggregatedTargetDeviceStatusChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged } DESCRIPTION "The status of one or more servers (connection paths) has changed. A list of connection paths whose status has changed is contained in dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged. This trap is always sent by the RCS on bootup to report the current status of all connection paths. Thereafter the trap is sent when there is a change in connection path status and will include only those paths whose status has changed. " --#SUMMARY "Aggregate server status changed." --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=50 ::= 46 dellrcsg2FactoryDefaultsSetTrap TRAP-TYPE ENTERPRISE dellrcsg2Products DESCRIPTION "The RCS has been commanded to set itself to factory defaults. The RCS sends this trap after being commanded to set itself to factory defaults but prior to actually reverting to factory defaults. " --#SUMMARY "The RCS was commanded to set itself to factory defaults." --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=51 ::= 47 dellrcsg2PowerSupplyFailureTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPowerSupply } DESCRIPTION "A power supply failure has ocurred, for RCSes with dual power supplies. The power supply which has failed is indicated in dellrcsg2TrapObjectPowerSupply. " --#SUMMARY "Power Supply %s has failed" --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=52 ::= 48 dellrcsg2PowerSupplyRestoredTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPowerSupply } DESCRIPTION "A power supply has been restored, for RCSes with dual power supplies. The power supply which has been restored is indicated in dellrcsg2TrapObjectPowerSupply. " --#SUMMARY "Power Supply %s has been restored" --#ARGUMENTS { 0 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=53 ::= 49 -- -- PDU Traps -- dellrcsg2PduDeviceOnlineTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "A power device attached to the RCS is detected to be online. This trap is sent upon initialization of the power device if it is online and responding. Subsequent traps are sent if the power device transitions from offline to online. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "A power device is online. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1 } --#SEVERITY MINOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=54 ::= 50 dellrcsg2PduDeviceOfflineTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "A power device attached to the RCS is detected to be offline. This trap is sent upon initialization of the power device if it is not responding. Subsequent traps are sent if the power device transitions from online to offline. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "A power device is offline. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1 } --#SEVERITY CRITICAL --#FACILITY SYSTEM --#CATEGORY "Error Events" --% TrapTypeEnum=55 ::= 51 dellrcsg2PduOutletOnCommandTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A outlet on a power device has been issued the on command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the on command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "The on command was issued to a power device outlet. Command issued by user: %s. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=56 ::= 52 dellrcsg2PduOutletOffCommandTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A outlet on a power device has been issued the off command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the off command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "The off command was issued to a power device outlet. Command issued by user: %s. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=57 ::= 53 dellrcsg2PduOutletRebootCommandTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A outlet on a power device has been issued the reboot command. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the reboot command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "The reboot command was issued to a power device outlet. Command issued by user: %s. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=58 ::= 54 dellrcsg2PduOutletOnSenseFailTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device attached to the RCS has detected an on sense failure for a outlet. An on sense failure occurs when a outlet should be in the on state but is actually in the off state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has the failure is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet on sense failure. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY CRITICAL --#FACILITY SYSTEM --#CATEGORY "Error Events" --% TrapTypeEnum=59 ::= 55 dellrcsg2PduOutletOffSenseFailTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device attached to the RCS has detected an off sense failure for a outlet. An off sense failure occurs when a outlet should be in the off state but is actually in the on state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has the failure is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet off sense failure. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY CRITICAL --#FACILITY SYSTEM --#CATEGORY "Error Events" --% TrapTypeEnum=60 ::= 56 dellrcsg2PduStatusOutletOnTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device outlet has changed to the on state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the on state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet state changed to on. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY MINOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=61 ::= 57 dellrcsg2PduStatusOutletOffTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device outlet has changed to the off state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the off state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet state changed to off. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=62 ::= 58 dellrcsg2PduPortNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldName, dellrcsg2TrapObjectItemName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "The name of a power device port has changed. The previous name of the power device port is contained in dellrcsg2TrapObjectOldName. The new name of the power device port is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device port name changed. Old name: %s. New name: %s. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=63 ::= 59 dellrcsg2PduOutletNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldName, dellrcsg2TrapObjectItemName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "The name of a power device outlet has changed. The previous name of the power device outlet is contained in dellrcsg2TrapObjectOldName. The new name of the power device outlet is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The outlet number of the power device is contained in dellrcsg2TrapObjectPduOutlet. " --#SUMMARY "Power device outlet name changed. Old name: %s. New name: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=64 ::= 60 dellrcsg2PduInletTotalLoadHighTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduDeviceInlet } DESCRIPTION "A power device attached to the RCS has exceeded the maximum threshold for total load of an inlet. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. " --#SUMMARY "Power device inlet exceeded the total load maximum threshold. Port number: %d. Power device number: %d. Inlet: %d." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Threshold Events" --% TrapTypeEnum=65 ::= 61 dellrcsg2PduInletTotalLoadLowTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduDeviceInlet } DESCRIPTION "A power device attached to the RCS has gone beneath the minimum threshold for total load. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. " --#SUMMARY "Power device inlet exceeded the total load minimum threshold. Port number: %d. Power device number: %d. Inlet: %d." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Threshold Events" --% TrapTypeEnum=66 ::= 62 dellrcsg2PduDeviceNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldName, dellrcsg2TrapObjectItemName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "The name of a power device has changed. The previous name of the power device is contained in dellrcsg2TrapObjectOldName. The new name of the power device is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device name changed. Old name: %s. New name: %s. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=67 ::= 63 dellrcsg2PduInletNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldName, dellrcsg2TrapObjectItemName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduDeviceInlet } DESCRIPTION "The name of a power device inlet has changed. The previous name of the power device inlet is contained in dellrcsg2TrapObjectOldName. The new name of the power device inlet is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The inlet of the power device is contained in dellrcsg2TrapObjectPduDeviceInlet. " --#SUMMARY "Power device inlet name changed. Old name: %s. New name: %s. Port number: %d. Power device number: %d. Inlet: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=68 ::= 64 dellrcsg2PduOutletLockCommandTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A outlet on a power device has been issued the lock command. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the lock command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "The lock command was issued to a power device outlet. Command issued by user: %s. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=69 ::= 65 dellrcsg2PduOutletUnlockCommandTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A outlet on a power device has been issued the unlock command. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that was issued the unlock command is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "The unlock command was issued to a power device outlet. Command issued by user: %s. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY MINOR --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=70 ::= 66 dellrcsg2PduStatusOutletLockTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device outlet has changed to the lock state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the lock state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet state changed to lock. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY MINOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=71 ::= 67 dellrcsg2PduStatusOutletUnlockTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectTargetDeviceName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device outlet has changed to the unlock state. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The outlet number that has changed to the unlock state is contained in dellrcsg2TrapObjectPduOutlet. The name of the server connected to the power device outlet is contained in dellrcsg2TrapObjectTargetDeviceName. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device outlet state changed to unlock. Target device: %s. Port number: %d. Power device number: %d. Outlet number: %d." --#ARGUMENTS { 0, 1, 2, 3 } --#SEVERITY MINOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=72 ::= 68 dellrcsg2PduImageFileUpgradeStartedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTypeOfImage, dellrcsg2TrapObjectImageNewVersion, dellrcsg2TrapObjectImageCurrentVersion, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "The RCS has started an upgrade of the power device software image file. The name of the user who initiated the image upgrade is contained in dellrcsg2TrapObjectUserName if available. The type of software image being upgraded is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the RCS is upgrading the power device to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the power device is currently running is contained in dellrcsg2TrapObjectImageCurrentVersion. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power Device Image upgrade started. Command issued by user: %s. Image type: %d. New version: %s. Current version: %s. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4, 5 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=73 ::= 69 dellrcsg2PduImageFileUpgradeResultTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectImageFileUpgradeResult, dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectTypeOfImage, dellrcsg2TrapObjectImageNewVersion, dellrcsg2TrapObjectImageCurrentVersion, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "The result of a software image file upgrade for a power device. The result is contained in dellrcsg2TrapObjectImageFileUpgradeResult. The name of the user who originally started the image upgrade is contained in dellrcsg2TrapObjectUserName if available. An empty string is reported if a user name is not available. The type of software image the upgrade result is for is contained in dellrcsg2TrapObjectTypeOfImage. The software image version the RCS attempted to upgrade to is contained in dellrcsg2TrapObjectImageNewVersion. The software image version the RCS is running is contained in dellrcsg2TrapObjectImageCurrentVersion. If the software image upgrade was successful then this version will match the version reported in dellrcsg2TrapObjectImageNewVersion. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device image upgrade result. Result: %d. Upgrade was started by user: %s. Upgrade image type: %d. Upgrade version: %s. Running version: %s. Port number: %d. Power device number: %d." --#ARGUMENTS { 0, 1, 2, 3, 4, 5, 6 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=74 ::= 70 dellrcsg2PduCircuitNameChangedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectOldName, dellrcsg2TrapObjectItemName, dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduDeviceCircuit } DESCRIPTION "The name of a power device circuit has changed. The previous name of the power device circuit is contained in dellrcsg2TrapObjectOldName. The new name of the power device circuit is contained in dellrcsg2TrapObjectItemName. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduDeviceCircuit. " --#SUMMARY "Power device circuit name changed. Old name: %s. New name: %s. Port number: %d. Power device number: %d. Circuit: %d." --#ARGUMENTS { 0, 1, 2, 3, 4 } --#SEVERITY INFORMATIONAL --#FACILITY SYSTEM --#CATEGORY "Configuration Events" --% TrapTypeEnum=75 ::= 71 dellrcsg2PduDeviceTotalLoadHighTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber } DESCRIPTION "A power device attached to the RCS has exceeded the maximum threshold for total load of the device. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. " --#SUMMARY "Power device exceeded the total load maximum threshold. Port number: %d. Power device number: %d. " --#ARGUMENTS { 0, 1 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Threshold Events" --% TrapTypeEnum=76 ::= 72 dellrcsg2PduCircuitTotalLoadHighTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduDeviceCircuit } DESCRIPTION "A power device attached to the RCS has exceeded the maximum threshold for total load of a circuit. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduDeviceCircuit. " --#SUMMARY "Power device circuit exceeded the total load maximum threshold. Port number: %d. Power device number: %d. Circuit: %d." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Threshold Events" --% TrapTypeEnum=77 ::= 73 dellrcsg2PduOutletTotalLoadHighTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectPduDevicePort, dellrcsg2TrapObjectPduDeviceNumber, dellrcsg2TrapObjectPduOutlet } DESCRIPTION "A power device attached to the RCS has exceeded the maximum threshold for total load of an Outlet. The port number on the RCS that the power device is attached to is contained in dellrcsg2TrapObjectPduDevicePort. The number of the power device that is connected to a port of the RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. The circuit of the power device is contained in dellrcsg2TrapObjectPduOutlet. " --#SUMMARY "Power device outlet exceeded the total load maximum threshold. Port number: %d. Power device number: %d. Outlet: %d." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Threshold Events" --% TrapTypeEnum=78 ::= 74 dellrcsg2FanFailureTrap TRAP-TYPE ENTERPRISE dellrcsg2Products DESCRIPTION "A fan failure has ocurred. " --#SUMMARY "Fan failure has been detected." --#ARGUMENTS { } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=79 ::= 75 dellrcsg2TemperatureRangeTrap TRAP-TYPE ENTERPRISE dellrcsg2Products DESCRIPTION "Unit temperature outside operating range has been reached. This trap is generated for a high temperature or low temperature which is outside operating range. " --#SUMMARY "Temperature is outside operating range." --#ARGUMENTS { } --#SEVERITY MAJOR --#FACILITY SYSTEM --#CATEGORY "Status Events" --% TrapTypeEnum=80 ::= 76 dellrcsg2SmartCardInsertedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A smart card has been inserted. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Smart Card inserted. User: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=81 ::= 77 dellrcsg2SmartCardRemovedTrap TRAP-TYPE ENTERPRISE dellrcsg2Products VARIABLES { dellrcsg2TrapObjectUserName, dellrcsg2TrapObjectSessionIdentifier, dellrcsg2TrapObjectUserAddress } DESCRIPTION "A smart card has been removed. The name of the user who is connected to the session is contained in dellrcsg2TrapObjectUserName. The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier. The user address is contained in dellrcsg2TrapObjectUserAddress. " --#SUMMARY "Smart Card removed. User: %s. Target device: %s. Address: %s." --#ARGUMENTS { 0, 1, 2 } --#SEVERITY INFORMATIONAL --#FACILITY SECURITY --#CATEGORY "Status Events" --% TrapTypeEnum=82 ::= 78 END