-- ----------------------------------------------------------------------------- -- MIB NAME : IPV6 Statis Route Common mib -- FILE NAME: IPv6StaticRoute.mib -- DATE : 2007/06/15 -- VERSION : 2.01 -- PURPOSE : To construct the MIB structure of IPv6 static route and ARP table -- for proprietary enterprise -- ----------------------------------------------------------------------------- -- MODIFICTION HISTORY: -- ----------------------------------------------------------------------------- -- Version, Date, Author -- Description: -- [New Object] -- [Modification] -- Notes: (Requested by who and which project) -- -- Version 2.01, 2007/06/15, Yan -- Description: -- [New Object] -- 1. Add object swIPv6StaticRouteBkupState in swIPv6StaticRouteTable. -- 2. Add object swIPv6NeighborCacheDeleteAction. -- Notes: Requested by Yan for project DGS36xxR2 -- -- Version 2.00, 2007/03/27, Yedda -- This is the first formal version for universal MIB definition. -- ----------------------------------------------------------------------------- IPV6-STATIC-ROUTE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE,IpAddress, Unsigned32 FROM SNMPv2-SMI MacAddress, RowStatus FROM SNMPv2-TC DisplayString FROM RFC1213-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB dlink-common-mgmt FROM DLINK-ID-REC-MIB; swIPv6StaticRouteMIB MODULE-IDENTITY LAST-UPDATED "0706150000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "The structure of the IPv6 static Route and ARP table management for the proprietary enterprise." ::= { dlink-common-mgmt 26 } -- ----------------------------------------------------------------------------- -- Textual Conventions -- ----------------------------------------------------------------------------- -- This definition may be excluded if IPv6 is not supported Ipv6Address ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order." SYNTAX OCTET STRING (SIZE (16)) swIPv6StaticRouteCtrl OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 1 } swIPv6StaticRouteInfo OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 2 } swIPv6StaticRouteMgmt OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 3 } swIPv6NeighborCacheMgmt OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 4 } -- ----------------------------------------------------------------------------- -- swIPv6StaticRouteMgmt OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 3 } -- ----------------------------------------------------------------------------- swIPv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SwIPv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IPv6 static Routing table." ::= { swIPv6StaticRouteMgmt 1 } swIPv6StaticRouteEntry OBJECT-TYPE SYNTAX SwIPv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry is built, it cannot be modified. That is, it just supports create and delete actions." INDEX { swIPv6StaticRouteDest, swIPv6StaticRoutePrefixLen, swIPv6StaticRouteInterfaceName, swIPv6StaticRouteNextHop } ::= { swIPv6StaticRouteTable 1 } SwIPv6StaticRouteEntry ::= SEQUENCE { swIPv6StaticRouteDest Ipv6Address, swIPv6StaticRoutePrefixLen INTEGER, swIPv6StaticRouteInterfaceName DisplayString, swIPv6StaticRouteNextHop Ipv6Address, swIPv6StaticRouteMetric INTEGER, swIPv6StaticRouteWeight INTEGER, swIPv6StaticProtocol DisplayString, swIPv6StaticRouteStatus RowStatus, swIPv6StaticRouteBkupState INTEGER } swIPv6StaticRouteDest OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the destination network IPv6 address for the route. If swIPv6StaticRouteDest and swIPv6StaticRoutePrefixLen are both 0, it means the default route." ::= { swIPv6StaticRouteEntry 1 } swIPv6StaticRoutePrefixLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length for this IPv6 address. If swIPv6StaticRouteDest and swIPv6StaticRoutePrefixLen are both 0, it means the default route." ::= { swIPv6StaticRouteEntry 2 } swIPv6StaticRouteInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the interface." ::= { swIPv6StaticRouteEntry 3 } swIPv6StaticRouteNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the next hop address for this route." ::= { swIPv6StaticRouteEntry 4 } swIPv6StaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing metric for this route." DEFVAL {1} ::= { swIPv6StaticRouteEntry 5 } swIPv6StaticRouteWeight OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "Specified weight value. Used for weighted multipath. The default setting is 1." DEFVAL {1} ::= { swIPv6StaticRouteEntry 6 } swIPv6StaticProtocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol state for this route." ::= { swIPv6StaticRouteEntry 7 } swIPv6StaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swIPv6StaticRouteEntry 8 } swIPv6StaticRouteBkupState OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "primary: Specifies the route as the primary route to the destination. backup: Specifies the route as the backup route to the destination. none: The route is not specified. If the route is not specified as the primary route or the backup route, then it will be auto-assigned by the system. The first created is the primary, the second created is the backup." ::= { swIPv6StaticRouteEntry 9 } -- ----------------------------------------------------------------------------- -- swIPv6NeighborCacheMgmt OBJECT IDENTIFIER ::= { swIPv6StaticRouteMIB 4 } -- ----------------------------------------------------------------------------- swIPv6NeighborCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SwIPv6NeighborCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IPv6 NeighborCache table." ::= { swIPv6NeighborCacheMgmt 1 } swIPv6NeighborCacheEntry OBJECT-TYPE SYNTAX SwIPv6NeighborCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry is built, it cannot be modified. That is, it just supports create and delete actions." INDEX { swIPv6NeighborCacheIPv6Address, swIPv6NeighborCacheMacAddress, swIPv6NeighborCacheInterfaceName } ::= { swIPv6NeighborCacheTable 1 } SwIPv6NeighborCacheEntry ::= SEQUENCE { swIPv6NeighborCacheIPv6Address Ipv6Address, swIPv6NeighborCacheMacAddress MacAddress, swIPv6NeighborCacheInterfaceName DisplayString, swIPv6NeighborCacheReachState INTEGER, swIPv6NeighborCacheRouteStatus RowStatus } swIPv6NeighborCacheIPv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IPv6 address of this neighbor." ::= { swIPv6NeighborCacheEntry 1 } swIPv6NeighborCacheMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of this neighbor ." ::= { swIPv6NeighborCacheEntry 2 } swIPv6NeighborCacheInterfaceName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swIPv6NeighborCacheEntry 3 } swIPv6NeighborCacheReachState OBJECT-TYPE SYNTAX INTEGER { incomplete(1), reachable(2), stale(3), delay(4), probe(5), static(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the reachability state of this neighbor." ::= { swIPv6NeighborCacheEntry 4 } swIPv6NeighborCacheRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swIPv6NeighborCacheEntry 5 } swIPv6NeighborCacheDeleteAction OBJECT-TYPE SYNTAX INTEGER { all(1), static(2), dynamic(3), other(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object will delete the cached neighbor entries. all: Deletes all cached neighbor entries include static and dynamic entries. static: Deletes all the cached static neighbor entries. dynamic: Deletes all the cached dynamic neighbor entries. " ::= { swIPv6NeighborCacheMgmt 2 } END