-- ----------------------------------------------------------------------------- -- MIB NAME : DNSResolver Common mib -- FILE NAME: DNSResolver.mib -- DATE : 2009/05/15 -- VERSION : 1.00 -- PURPOSE : To define MIB objects for DNS Resolver. -- ----------------------------------------------------------------------------- -- MODIFICTION HISTORY: -- ----------------------------------------------------------------------------- -- Version, Date, Author -- Description: -- [New Object] -- [Modification] -- Notes: (Requested by who and which project) -- -- Version 1.00, 2009/05/15, Mark Luo -- This is the initial draft for universal MIB definition. -- ----------------------------------------------------------------------------- DNSResolver-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI RowStatus,DisplayString FROM SNMPv2-TC dlink-common-mgmt FROM DLINK-ID-REC-MIB Ipv6Address FROM IPV6-TC; swDNSResolverMIB MODULE-IDENTITY LAST-UPDATED "0905150000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "This MIB module defining objects for the management of DNS Resolver." ::= { dlink-common-mgmt 85 } swDNSResolverMIBObjects OBJECT IDENTIFIER ::= { swDNSResolverMIB 1 } -- ----------------------------------------------------------------------------- -- Textual conventions -- ----------------------------------------------------------------------------- DnsName ::= TEXTUAL-CONVENTION -- A DISPLAY-HINT would be nice, but difficult to express. STATUS current DESCRIPTION "A DNS name is a sequence of labels. When DNS names are displayed, the boundaries between labels are typically indicated by dots (e.g. `Acme' and `COM' are labels in the name `Acme.COM'). In the DNS protocol, however, no such separators are needed because each label is encoded as a length octet followed by the indicated number of octets of label. For example, `Acme.COM' is encoded as the octet sequence { 4, 'A', 'c', 'm', 'e', 3, 'C', 'O', 'M', 0 } (the final 0 is the length of the name of the root domain, which appears implicitly at the end of any DNS name). This MIB uses the same encoding as the DNS protocol. A DnsName must always be a fully qualified name. It is an error to encode a relative domain name as a DnsName without first making it a fully qualified name." REFERENCE "RFC-1034 section 3.1." SYNTAX OCTET STRING (SIZE (0..255)) DnsTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "4d" STATUS current DESCRIPTION "DnsTime values are 32-bit unsigned integers which measure time in seconds." REFERENCE "RFC-1035." SYNTAX INTEGER swDNSResState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the DNS Resolver state." DEFVAL {enabled} ::={swDNSResolverMIBObjects 1} swDNSResNameSrvTimeOut OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the DNS Resolver name server time out." DEFVAL {3} ::={swDNSResolverMIBObjects 2} -- ----------------------------------------------------------------------------- -- swDNSResNameSrv -- ----------------------------------------------------------------------------- swDNSResNameSrv OBJECT IDENTIFIER ::= { swDNSResolverMIBObjects 3 } swDNSResStaticNameSrvTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDNSResStaticNameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains DNS resolver static name server information." ::= { swDNSResNameSrv 1} swDNSResStaticNameSrvEntry OBJECT-TYPE SYNTAX SwDNSResStaticNameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about DNS resolver static name server." INDEX { swDNSResStaticNameSrvIndex } ::= { swDNSResStaticNameSrvTable 1 } SwDNSResStaticNameSrvEntry ::= SEQUENCE { swDNSResStaticNameSrvIndex INTEGER, swDNSResStaticNameSrvRowStatus RowStatus, swDNSResStaticNameSrvIPaddr IpAddress, swDNSResStaticNameSrvPriority INTEGER } swDNSResStaticNameSrvIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DNS resolver static name server table index." ::= { swDNSResStaticNameSrvEntry 1 } swDNSResStaticNameSrvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swDNSResStaticNameSrvEntry 2 } swDNSResStaticNameSrvIPaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the DNS resolver static name server IP address." ::= { swDNSResStaticNameSrvEntry 3 } swDNSResStaticNameSrvPriority OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the DNS resolver static name server priority, primary name server or secondary name server." ::= { swDNSResStaticNameSrvEntry 4 } -- ----------------------------------------------------------------------------- -- swDNSResDynamicNameSrvTable -- ----------------------------------------------------------------------------- swDNSResDynamicNameSrvTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDNSResDynamicNameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains DNS resolver dynamic name server information." ::= { swDNSResNameSrv 2} swDNSResDynamicNameSrvEntry OBJECT-TYPE SYNTAX SwDNSResDynamicNameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about DNS resolver dynamic name server." INDEX { swDNSResDynamicNameSrvIndex } ::= { swDNSResDynamicNameSrvTable 1 } SwDNSResDynamicNameSrvEntry ::= SEQUENCE { swDNSResDynamicNameSrvIndex INTEGER, swDNSResDynamicNameSrvIPaddr IpAddress, swDNSResDynamicNameSrvPriority INTEGER } swDNSResDynamicNameSrvIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic name server table index." ::= { swDNSResDynamicNameSrvEntry 1 } swDNSResDynamicNameSrvIPaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic name server IP address." ::= { swDNSResDynamicNameSrvEntry 2 } swDNSResDynamicNameSrvPriority OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic name server priority, primary name server or secondary name server." ::= { swDNSResDynamicNameSrvEntry 3 } -- ----------------------------------------------------------------------------- -- swDNSResIPv6NameSrv -- ----------------------------------------------------------------------------- swDNSResStaticIPv6NameSrvTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDNSResStaticIPv6NameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies DNS resolver static name server information." ::= { swDNSResNameSrv 3} swDNSResStaticIPv6NameSrvEntry OBJECT-TYPE SYNTAX SwDNSResStaticIPv6NameSrvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry includes all DNS resolver static name server information." INDEX { swDNSResStaticIPv6NameSrvIndex } ::= { swDNSResStaticIPv6NameSrvTable 1 } SwDNSResStaticIPv6NameSrvEntry ::= SEQUENCE { swDNSResStaticIPv6NameSrvIndex INTEGER, swDNSResStaticIPv6NameSrvaddr Ipv6Address, swDNSResStaticIPv6NameSrvIntfName DisplayString, swDNSResStaticIPv6NameSrvPriority INTEGER, swDNSResStaticIPv6NameSrvRowStatus RowStatus } swDNSResStaticIPv6NameSrvIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DNS resolver static name server table index." ::= { swDNSResStaticIPv6NameSrvEntry 1 } swDNSResStaticIPv6NameSrvaddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the the DNS resolver static name server IP address." ::= { swDNSResStaticIPv6NameSrvEntry 2 } swDNSResStaticIPv6NameSrvIntfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to specify the interface name when swDNSResStaticIPv6NameSrvaddr is a link local address. " ::= { swDNSResStaticIPv6NameSrvEntry 3 } swDNSResStaticIPv6NameSrvPriority OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the DNS resolver static name server priority, primary name server or secondary name server." ::= { swDNSResStaticIPv6NameSrvEntry 4 } swDNSResStaticIPv6NameSrvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages this entry." ::= { swDNSResStaticIPv6NameSrvEntry 100 } -- ----------------------------------------------------------------------------- -- swDNSResHost -- ----------------------------------------------------------------------------- swDNSResHost OBJECT IDENTIFIER ::= { swDNSResolverMIBObjects 4 } -- ----------------------------------------------------------------------------- -- swDNSResStaticHostTable -- ----------------------------------------------------------------------------- swDNSResStaticHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDNSResStaticHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains DNS resolver static host information." ::= { swDNSResHost 1} swDNSResStaticHostEntry OBJECT-TYPE SYNTAX SwDNSResStaticHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about DNS resolver static host." INDEX { swDNSResStaticHostIndex } ::= { swDNSResStaticHostTable 1 } SwDNSResStaticHostEntry ::= SEQUENCE { swDNSResStaticHostIndex INTEGER, swDNSResStaticHostRowStatus RowStatus, swDNSResStaticHostName DnsName, swDNSResStaticHostIPaddr IpAddress, swDNSResStaticHostIPv6addr Ipv6Address, swDNSResStaticHostIPv6IntfName DisplayString } swDNSResStaticHostIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DNS resolver static host table index." ::= { swDNSResStaticHostEntry 1 } swDNSResStaticHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swDNSResStaticHostEntry 2 } swDNSResStaticHostName OBJECT-TYPE SYNTAX DnsName MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the DNS resolver static host name." ::= { swDNSResStaticHostEntry 3 } swDNSResStaticHostIPaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the the DNS resolver static host IP address." ::= { swDNSResStaticHostEntry 4 } swDNSResStaticHostIPv6addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the the DNS resolver static host IPv6 address. Note: current IPv6 doesn't support VRF." ::= { swDNSResStaticHostEntry 6 } swDNSResStaticHostIPv6IntfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to specify the interface name when swDNSResStaticHostIPv6addr is a link local address. " ::= { swDNSResStaticHostEntry 7 } -- ----------------------------------------------------------------------------- -- swDNSResDynamicHostTable -- ----------------------------------------------------------------------------- swDNSResDynamicHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDNSResDynamicHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains DNS resolver dynamic host information." ::= { swDNSResHost 2} swDNSResDynamicHostEntry OBJECT-TYPE SYNTAX SwDNSResDynamicHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about DNS resolver dynamic host." INDEX { swDNSResDynamicHostIndex } ::= { swDNSResDynamicHostTable 1 } SwDNSResDynamicHostEntry ::= SEQUENCE { swDNSResDynamicHostIndex INTEGER, swDNSResDynamicHostName DnsName, swDNSResDynamicHostIPaddr IpAddress, swDNSResDynamicHostTTL DnsTime, swDNSResDynamicHostClearCtrl INTEGER, swDNSResDynamicHostIPv6addr Ipv6Address, swDNSResDynamicHostIPv6IntfName DisplayString } swDNSResDynamicHostIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic host index." ::= { swDNSResDynamicHostEntry 1 } swDNSResDynamicHostName OBJECT-TYPE SYNTAX DnsName MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic host name." ::= { swDNSResDynamicHostEntry 2 } swDNSResDynamicHostIPaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic host IP address." ::= { swDNSResDynamicHostEntry 3 } swDNSResDynamicHostTTL OBJECT-TYPE SYNTAX DnsTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time of the dynamic host remained in caches to live." ::= { swDNSResDynamicHostEntry 4 } swDNSResDynamicHostClearCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to clear DNS resolver dynamic host. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'." ::= { swDNSResDynamicHostEntry 5 } swDNSResDynamicHostIPv6addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the DNS resolver dynamic host IPv6 address. Note: current IPv6 doesn't support VRF." ::= { swDNSResDynamicHostEntry 7 } swDNSResDynamicHostIPv6IntfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to specify the interface name when swDNSResDynamicHostIPv6addr is a link local address. " ::= { swDNSResDynamicHostEntry 8 } END