-- ***************************************************************** -- DLINKPRIME-VLAN-MIB.mib : VLAN MIB -- -- Copyright (c) 2014 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKPRIME-VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI RowStatus,TruthValue, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress,InetAddressType, InetAddressPrefixLength FROM INET-ADDRESS-MIB dot1dBasePort FROM BRIDGE-MIB VlanId,VlanIdOrNone,PortList, dot1vProtocolPortGroupId FROM Q-BRIDGE-MIB dlinkPrimeCommon FROM DLINK-ID-REC-MIB; Dlink2kVlanList ::= OCTET STRING (SIZE (256)) -- a string of octets containing one bit per VLAN for VLANs 1 -- to 2048 dlinkPrimeVlanMIB MODULE-IDENTITY LAST-UPDATED "201404260000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "This MIB module defines objects for extending the configuration of VLAN (Virtual Local Area Network). " REVISION "201404260000Z" DESCRIPTION "This is the first version of the MIB file." ::= { dlinkPrimeCommon 26 } -- ----------------------------------------------------------------------------- dpVlanMIBNotifications OBJECT IDENTIFIER ::= { dlinkPrimeVlanMIB 0 } dpVlanMIBObjects OBJECT IDENTIFIER ::= { dlinkPrimeVlanMIB 1 } dpVlanMIBConformance OBJECT IDENTIFIER ::= { dlinkPrimeVlanMIB 2 } -- ----------------------------------------------------------------------------- dpVlanPortIfCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DpVlanPortIfCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides mechanism to configure port-specific VLAN function." ::= { dpVlanMIBObjects 1 } dpVlanPortIfCtrlEntry OBJECT-TYPE SYNTAX DpVlanPortIfCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry represents the VLAN configuration on a port. This table is an extension to dot1qPortVlanTable which is defined at Q-BRIDGE-MIB." INDEX { dot1dBasePort } ::= { dpVlanPortIfCtrlTable 1 } DpVlanPortIfCtrlEntry ::= SEQUENCE { dpVlanPortIfMode INTEGER, dpVlanPortIfTrunkNativeVlanTagged TruthValue, dpVlanPortIfAcceptableFrameTypes INTEGER, dpVlanPortIfTagAllowVlanLstFirst2K Dlink2kVlanList, dpVlanPortIfTagAllowVlanLstSecond2K Dlink2kVlanList, dpVlanPortIfUntagAllowVlanLstFirst2K Dlink2kVlanList, dpVlanPortIfUntagAllowVlanLstSecond2K Dlink2kVlanList } dpVlanPortIfMode OBJECT-TYPE SYNTAX INTEGER { access(1), hybrid(2), trunk(3), dot1qTunnel(4), privateVlanHost(5), privateVlanPromiscuous(6), privateVlanTrunkPromiscuous(7), privateVlanTrunkSecondary(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates VLAN mode for the port. access - this port will be untagged member of the access VLAN configured for the port. hybrid - the port can be untagged or tagged member of all VLANs configured by the user. The purpose of this VLAN mode is to support protocol VLAN, MAC-based VLAN, voice VLAN and dot1q VLAN tunnel application in access side. trunk - this port is either tagged or untagged member port of its native VLAN and can be tagged member of other VLANs configured by the user. The purpose of a trunk port is to support the switch-to-switch connection. dot1qTunnel - the port behaves as an UNI port of a service VLAN. privateVlanHost - the port behaves as private VLAN host port. privateVlanPromiscuous - the port behaves as private VLAN promiscuous port. privateVlanTrunkPromiscuous - the port behaves as private VLAN trunk promiscuous port. privateVlanTrunkSecondary - the port behaves as private VLAN trunk secondary port. When VLAN mode is changed, the VLAN related setting associated with previous mode will be lost." ::= { dpVlanPortIfCtrlEntry 1 } dpVlanPortIfTrunkNativeVlanTagged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'." ::= { dpVlanPortIfCtrlEntry 2 } dpVlanPortIfAcceptableFrameTypes OBJECT-TYPE SYNTAX INTEGER { admitAll(1), admitUntaggedAndPriority(2), admitTagged(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntaggedAndPriority' - Only untagged or Priority-Tagged packets received on this interface will be accepted and tagged packets are dropped. 'admitTagged' - Only tagged incoming packets are permitted and untagged packets are dropped." ::= { dpVlanPortIfCtrlEntry 3 } dpVlanPortIfTagAllowVlanLstFirst2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'" ::= { dpVlanPortIfCtrlEntry 4 } dpVlanPortIfTagAllowVlanLstSecond2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'" ::= { dpVlanPortIfCtrlEntry 5 } dpVlanPortIfUntagAllowVlanLstFirst2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'." ::= { dpVlanPortIfCtrlEntry 6 } dpVlanPortIfUntagAllowVlanLstSecond2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'." ::= { dpVlanPortIfCtrlEntry 7 } -- ----------------------------------------------------------------------------- dpVlanAsymVlanStateEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables asymmetric VLAN feature." ::= { dpVlanMIBObjects 2 } --------------------------------------------------------------------------------- dpVlanManagementVlanGlobal OBJECT IDENTIFIER ::= { dpVlanMIBObjects 3 } dpVlanManagementVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables management VLAN feature." ::= { dpVlanManagementVlanGlobal 1 } dpVlanManagementVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the management VLAN on a switch. A value of zero indicates that no management VLAN has been configured. It is required to configure the global dpVlanManagementVlanId and enable dpsvEnabled to start the management VLAN function." DEFVAL { 0 } ::= { dpVlanManagementVlanGlobal 2 } --------------------------------------------------------------------------------- dpVlanPortBasedVlan OBJECT IDENTIFIER ::= { dpVlanMIBObjects 4 } dpVlanPortBasedVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables Port-based VLAN feature." ::= { dpVlanPortBasedVlan 1 } dpPortBasedVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF DpPortBasedVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { dpVlanPortBasedVlan 2 } dpPortBasedVlanEntry OBJECT-TYPE SYNTAX DpPortBasedVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a Port-based VLAN configured into the device by (local or network) management." INDEX { dpPortBasedVlanIndex } ::= { dpPortBasedVlanTable 1 } DpPortBasedVlanEntry ::= SEQUENCE { dpPortBasedVlanIndex Integer32, dpPortBasedVlanEgressPorts PortList, dpPortBasedVlanRowStatus RowStatus } dpPortBasedVlanIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Port-based VLAN index." ::= { dpPortBasedVlanEntry 1 } dpPortBasedVlanEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports that are permanently assigned to the egress list for this VLAN by management. " ::= { dpPortBasedVlanEntry 2 } dpPortBasedVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { dpPortBasedVlanEntry 3 } -- *************************************************************************** -- Conformance -- *************************************************************************** dpVlanCompliances OBJECT IDENTIFIER ::= { dpVlanMIBConformance 1 } dpVlanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKPRIME-VLAN-MIB." MODULE -- this module MANDATORY-GROUPS { dpVlanIfCfgGroup } GROUP dpVlanAsymmetricVlanCfgGroup DESCRIPTION "Implementation of this group is optional." ::= { dpVlanCompliances 1 } dpVlanGroups OBJECT IDENTIFIER ::= { dpVlanMIBConformance 2 } dpVlanIfCfgGroup OBJECT-GROUP OBJECTS { dpVlanPortIfMode, dpVlanPortIfTrunkNativeVlanTagged, dpVlanPortIfAcceptableFrameTypes, dpVlanPortIfTagAllowVlanLstFirst2K, dpVlanPortIfTagAllowVlanLstSecond2K, dpVlanPortIfUntagAllowVlanLstFirst2K, dpVlanPortIfUntagAllowVlanLstSecond2K } STATUS current DESCRIPTION "A collection of objects providing the information and control for configuring port-specific VLAN feature." ::= { dpVlanGroups 1 } dpVlanAsymmetricVlanCfgGroup OBJECT-GROUP OBJECTS { dpVlanAsymVlanStateEnabled } STATUS current DESCRIPTION "A collection of objects provides the management of asymmetric VLAN feature." ::= { dpVlanGroups 2 } END