-- The DHS3226 proprietary MIB Ver 1.7 2002/06/05 DHS3226-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress , TimeTicks , Integer32, MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC PortList FROM Q-BRIDGE-MIB dlink-mgmt FROM DLINK-ID-REC-MIB dlink-Dhs3226Prod FROM DLINK-ID-REC-MIB; swL2MgmtMIB MODULE-IDENTITY LAST-UPDATED "0007150000Z" ORGANIZATION "D-Link, Inc." CONTACT-INFO " D-Link Customer Service Postal: No. 20,Park Ave, II, Science-based Industrial Park, Hsinchu, taiwan, R.O.C. Tel: 886-3-577-9966 E-mail: " DESCRIPTION "The Structure of Layer 2 Network Management Information for the D-Link enterprise." ::= { dlink-mgmt dhs3226(36) 2} VlanId ::= INTEGER (1..4094) swL2Property OBJECT IDENTIFIER ::= { dlink-Dhs3226Prod 1 } swL2Module OBJECT IDENTIFIER ::= { swL2Property 1 } swL2BwMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } swL2PortMirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } -- ******************************************************************** -- swL2BwMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } -- ******************************************************************** swL2BwMgmtFEPortUnitBandwidth OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the represented bandwidth for each unit if the counting type is for Fast Ethernet ports." ::= { swL2BwMgmt 1 } swL2BwMgmtGEPortUnitBandwidth OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the represented bandwidth for each unit if the counting type is for Gigabit Ethernet ports." ::= { swL2BwMgmt 2 } -- ******************************************************* swL2IngrPortBwControl OBJECT IDENTIFIER ::= { swL2BwMgmt 3 } swL2IngrPortBwCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IngrPortBwCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the current control information about the ingress bandwidth of port" ::= { swL2IngrPortBwControl 3 } swL2IngrPortBwCtrlEntry OBJECT-TYPE SYNTAX SwL2IngrPortBwCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in swL2IngrPortBwCtrlTable." INDEX { swL2IngrPortBwCtrlPort } ::= { swL2IngrPortBwCtrlTable 1 } SwL2IngrPortBwCtrlEntry ::= SEQUENCE { swL2IngrPortBwCtrlPort INTEGER, swL2IngrPortBwCtrlPortCountType INTEGER, swL2IngrPortBwCtrlPortNwayStatus INTEGER, swL2IngrPortBwCtrlUnit INTEGER, swL2IngrPortBwCtrlRate INTEGER, swL2IngrPortBwCtrlStatus INTEGER } swL2IngrPortBwCtrlPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port to limit ingress bandwidth." ::= { swL2IngrPortBwCtrlEntry 1 } swL2IngrPortBwCtrlPortCountType OBJECT-TYPE SYNTAX INTEGER { fastEthernetPort(1), gigabitEthernetPort(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the counting type of port. All the regular ports have the type fastEthernetPort, and the others have the type gigabitEthernetPort. If counting type is fastEthernetPort, the limited bandwidth will be that swL2IngrPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth. If counting type is gigabitEthernetPort, the limited bandwidth will be that swL2IngrPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth." ::= { swL2IngrPortBwCtrlEntry 2 } swL2IngrPortBwCtrlPortNwayStatus OBJECT-TYPE SYNTAX INTEGER { other(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5), half-1Gigabps(6), full-1Gigabps(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates speed and duplex mode of port." ::= { swL2IngrPortBwCtrlEntry 3 } swL2IngrPortBwCtrlUnit OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the current units for the limitation of ingress bandwidth of port." ::= { swL2IngrPortBwCtrlEntry 4 } swL2IngrPortBwCtrlRate OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the limitation of forwarding bandwidth in kilobyte. The value should be that swL2IngrPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth, if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth, if counting type is gigabitEthernetPort." ::= { swL2IngrPortBwCtrlEntry 5 } swL2IngrPortBwCtrlStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry. All the existed entries will return enabled(3). An entry will be created if this object is set to enabled(3) and not existed. If this object is set to disabled(2), this entry will be deleted." ::= { swL2IngrPortBwCtrlEntry 6 } -- ******************************************************* swL2EgressPortBwControl OBJECT IDENTIFIER ::= { swL2BwMgmt 4 } swL2EgressPortBwCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2EgressPortBwCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the current control information about the egress bandwidth of port" ::= { swL2EgressPortBwControl 3 } swL2EgressPortBwCtrlEntry OBJECT-TYPE SYNTAX SwL2EgressPortBwCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in swL2EgressPortBwCtrlTable." INDEX { swL2EgressPortBwCtrlPort } ::= { swL2EgressPortBwCtrlTable 1 } SwL2EgressPortBwCtrlEntry ::= SEQUENCE { swL2EgressPortBwCtrlPort INTEGER, swL2EgressPortBwCtrlPortCountType INTEGER, swL2EgressPortBwCtrlPortNwayStatus INTEGER, swL2EgressPortBwCtrlUnit INTEGER, swL2EgressPortBwCtrlRate INTEGER, swL2EgressPortBwCtrlStatus INTEGER } swL2EgressPortBwCtrlPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port to limit egress bandwidth." ::= { swL2EgressPortBwCtrlEntry 1 } swL2EgressPortBwCtrlPortCountType OBJECT-TYPE SYNTAX INTEGER { fastEthernetPort(1), gigabitEthernetPort(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the counting type of port. All the regular ports have the type fastEthernetPort, and the others have the type gigabitEthernetPort. If counting type is fastEthernetPort, the limited bandwidth will be that swL2EgressPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth. If counting type is gigabitEthernetPort, the limited bandwidth will be that swL2EgressPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth." ::= { swL2EgressPortBwCtrlEntry 2 } swL2EgressPortBwCtrlPortNwayStatus OBJECT-TYPE SYNTAX INTEGER { other(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5), half-1Gigabps(6), full-1Gigabps(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates speed and duplex mode of port." ::= { swL2EgressPortBwCtrlEntry 3 } swL2EgressPortBwCtrlUnit OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the current units for the limitation of egress bandwidth of port." ::= { swL2EgressPortBwCtrlEntry 4 } swL2EgressPortBwCtrlRate OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the limitation of forwarding bandwidth in kilobyte. The value should be that swL2EgressPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth, if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth, if counting type is gigabitEthernetPort." ::= { swL2EgressPortBwCtrlEntry 5 } swL2EgressPortBwCtrlStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of this entry. All the existed entries will return enabled(3). An entry will be created if this object is set to enabled(3) and not existed. If this object is set to disabled(2), this entry will be deleted." ::= { swL2EgressPortBwCtrlEntry 6 } -- ******************************************************* swL2GrpAddrFltrMode OBJECT-TYPE SYNTAX INTEGER { other(1), forwardAllGrpAddr(2), forwardAllUnregGrpAddr(3), filterAllUnregGrpAddr(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the filtering mode for all ports. In forwardAllGrpAddr(2) mode - forward all group address, all frames destined for group MAC addresses are forwarded according to the VLAN rules. In forwardAllUnregGrpAddr(3) mode - forward all unregistered group addresses, if the Group MAC Address Registration entries exist in the Multicast Table, frames destined for the corresponding group MAC addresses will be forwarded, only on ports identified in the member port set, which is identified by the Port Bitmap. The Untagged Bitmap is also used to send tagged packets on the member ports. On the other hand, if the Group MAC Address does not exist in the Multicast Table, the filtering mechanism of forwardAllGrpAddr(2) mode is used. In filterAllUnregGrpAddr(4) mode - filter all unregistered group addresses, frames destined for group MAC addresses are forwarded only if such forwarding is explicity permitted by a Group Address entry in the Multicast Table. In other words, if the Group MAC Address exists in the Multicast table, then the packets are forwarded using the Port Bitmap and the Untagged Bitmap from that entry. Otherwise, the packets are dropped." ::= { swL2MgmtMIB 2 } -- ******************************************************************** -- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- ******************************************************************** swL2CosScheduleMethod OBJECT-TYPE SYNTAX INTEGER { other(1), strict(2), roundRobin(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the scheduling mechanism for CoS queues. In strict(2) mode - packet process will start from highest CoS queue for a given port, then moves on to the next lower CoS queue while the higher CoS queue is empty packet. In roundRobin(3) mode - packet process will start from highest CoS queue for a given port, then moves on to the next lower CoS queue after sending swL2CosMaxPackets or when the higher CoS queue is empty packet." ::= { swL2CosMgmt 1 } swL2CosControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2CosControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { swL2CosMgmt 2 } swL2CosControlEntry OBJECT-TYPE SYNTAX SwL2CosControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in swL2CosControlTable." INDEX { swL2CosQueueIndex } ::= { swL2CosControlTable 1 } SwL2CosControlEntry ::= SEQUENCE { swL2CosQueueIndex INTEGER, swL2CosMaxPackets INTEGER, swL2CosMaxLatency INTEGER } swL2CosQueueIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates CoS Queue." ::= { swL2CosControlEntry 1 } swL2CosMaxPackets OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates maximum packet count for a CoS Queue. This object only takes effect at roundRobin mode of swL2CosScheduleMethod." ::= { swL2CosControlEntry 2 } swL2CosMaxLatency OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates maximum allowable latency for packet transmission on a CoS Queue such that the packets on this queue are not delayed more than the maximum allowable latency time. The granularity of this timer is 17 microsecond. A value of 0x00 disable this timer. swL2CosMaxLatency takes precedence over swL2CosScheduleMethod." ::= { swL2CosControlEntry 3 } -- ******************************************************************** -- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- ******************************************************************** swL2PortSecurityControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port." ::= { swL2PortSecurityMgmt 1 } swL2PortSecurityControlEntry OBJECT-TYPE SYNTAX SwL2PortSecurityControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in swL2PortSecurityControlTable." INDEX { swL2PortSecurityPortIndex } ::= { swL2PortSecurityControlTable 1 } SwL2PortSecurityControlEntry ::= SEQUENCE { swL2PortSecurityPortIndex INTEGER, swL2PortSecurityMaxLernAddr INTEGER, swL2PortSecurityMode INTEGER, swL2PortSecurityAdmState INTEGER } swL2PortSecurityPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the secured port to lock address learning." ::= { swL2PortSecurityControlEntry 1 } swL2PortSecurityMaxLernAddr OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates allowable number of addresses to be learned at this port." ::= { swL2PortSecurityControlEntry 2 } swL2PortSecurityMode OBJECT-TYPE SYNTAX INTEGER { other(1), deleteOnTimeout(2), deleteOnReset(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode of locking address. In deleteOnTimeout(2) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(3) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion." ::= { swL2PortSecurityControlEntry 3 } swL2PortSecurityAdmState OBJECT-TYPE SYNTAX INTEGER { other(1), enable(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates administration state of locking address." ::= { swL2PortSecurityControlEntry 4 } -- ******************************************************************** -- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } -- ******************************************************************** swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 } swL2DevInfoSystemUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds." ::= { swL2DevInfo 1 } swL2DevInfoTotalNumOfPort OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports within this switch. This value is the sum of the ports within this switch." ::= { swL2DevInfo 2 } swL2DevInfoNumOfPortInUse OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in this switch connected to the segment or the end stations." ::= { swL2DevInfo 3 } swL2DevInfoConsoleInUse OBJECT-TYPE SYNTAX INTEGER { other(1), in-use(2), not-in-use(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This usage indication of console system." ::= { swL2DevInfo 4 } swL2DevInfoFrontPanelLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a set of system LED indications. The first third octets is defined as system LED . The first LED is power LED . The second LED is console LED . The third LED is RPS (Redundancy Power Supply) LED . . The other octets following the third octets are the logical port LED (following dot1dBasePort ordering) . Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED . The second byte is presented to the Speed LED . There is one byte per LED . The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks. The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used The four remaining bits are currently unused and must be 0 ." ::= { swL2DevInfo 5 } swL2DevInfoCpuUtilization OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates CPU utilization" ::= { swL2DevInfo 6 } -- ******************************************************* swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 } swL2DevCtrlSystemReboot OBJECT-TYPE SYNTAX INTEGER { other(1), reboot(2), save-config-and-reboot(3), reboot-and-load-factory-default-config(4), reboot-and-load-factory-default-config-except-ip-address(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the agent system reboot state. The agent always returns other(1) when this object is read." ::= { swL2DevCtrl 1 } swL2DevCtrlSystemIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates system ip." ::= { swL2DevCtrl 2 } swL2DevCtrlSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates system subnet mask." ::= { swL2DevCtrl 3 } swL2DevCtrlDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates system default gateway." ::= { swL2DevCtrl 4 } swL2DevCtrlManagementVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls which Vlan includes system ip. And the Vlan should have been created." ::= { swL2DevCtrl 5 } swL2DevCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be enabled or disabled spanning tree algorithm during runtime of the system." ::= { swL2DevCtrl 6 } swL2DevCtrlIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled ." ::= { swL2DevCtrl 7 } swL2DevCtrlBcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates broadcast storm control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail about the storm control ." ::= { swL2DevCtrl 8 } swL2DevCtrlMcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates multicast storm control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail about the storm control ." ::= { swL2DevCtrl 9 } swL2DevCtrlDestLookupFailureCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates destination lookup failure rate control function is enabled or disabled. The swL2PortCtrlBMDStormLimit object will descript the detail about the storm control ." ::= { swL2DevCtrl 10 } swL2DevCtrlBMDStormLimit OBJECT-TYPE SYNTAX INTEGER (0..262143) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how many broadcast/multicast (depend on swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second will pass thru. Beyond the limit, the device will start dropping that type of packet until the second interval has expired . Once the time interval has expired , the device will start forwarding that type of packet." ::= { swL2DevCtrl 11 } swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing." ::= { swL2DevCtrl 12 } swL2DevCtrlSnmpEnableAuthenTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system." ::= { swL2DevCtrl 13 } swL2DevCtrlFilterEAPOLPDU OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether to filter the EAPOL PDU. If the administrative state for Port Access Control in a System is enabled, this object is meaningless. Otherwise, when this object is yes(1), the EAPOL packets will be dropped. When this object is no(2), the EAPOL packets will pass." ::= { swL2DevCtrl 14 } swL2DevCtrlTrafficSegmentation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is disabled(2), then no traffic segmentation. When we set it to enabled(1), there are three conditions for the traffic segmentation. (1) If without plugging in option module, port 1 is the server port. (2) If plugging in one-port module, the port on the module is the server port. (3) If plugging in two-port module, these two ports on the module are the server ports. Under this situation, other ports(Client ports) can only communicate with the server port. Client ports can't communicate with each other." ::= { swL2DevCtrl 15 } -- ************************ -- pingTest * -- ************************ agentPingTest OBJECT IDENTIFIER ::= { swL2DevCtrl 16 } agentPingTestIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The target ip address of the ping test " ::= { agentPingTest 1 } agentPingTestRepetition OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The repetition times of the ping test " ::= { agentPingTest 2 } agentPingTestControl OBJECT-TYPE SYNTAX INTEGER { stop(0), active(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " To control the device to start ping or stop ping" ::= { agentPingTest 3 } agentPingTestStatus OBJECT-TYPE SYNTAX INTEGER { finish(0), proceeding(1) } MAX-ACCESS read-only STATUS current DESCRIPTION " The state of the ping test, proceeding means the ping test is going on, and finish means the ping test is finished" ::= { agentPingTest 4 } agentPingTestSuccessCount OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION " The success times of the ping test." ::= { agentPingTest 5 } agentPingTestFailCount OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION " The fail times of the ping test." ::= { agentPingTest 6 } swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system ." ::= { swL2DevCtrl 17 } -- ******************************************************************** -- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } -- ******************************************************************** swL2PortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port." ::= { swL2PortMgmt 1 } swL2PortInfoEntry OBJECT-TYPE SYNTAX SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port of the device." INDEX { swL2PortInfoPortIndex } ::= { swL2PortInfoTable 1 } SwL2PortInfoEntry ::= SEQUENCE { swL2PortInfoPortIndex INTEGER, swL2PortInfoType INTEGER, swL2PortInfoDescr DisplayString, swL2PortInfoLinkStatus INTEGER, swL2PortInfoNwayStatus INTEGER } swL2PortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortInfoEntry 1 } swL2PortInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), portType-UTP(2), portType-AUI(3), portType-Fiber-MTRJ(4), portType-Fiber-SC(5), portType-Fiber-GBIC(6), portType-BNC(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connector type of this port." ::= { swL2PortInfoEntry 2 } swL2PortInfoDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides port type information in displayed string format" ::= { swL2PortInfoEntry 3 } swL2PortInfoLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port link status." ::= { swL2PortInfoEntry 4 } swL2PortInfoNwayStatus OBJECT-TYPE SYNTAX INTEGER { other(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5), half-1Gigabps(6), full-1Gigabps(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port speed and duplex mode." ::= { swL2PortInfoEntry 5 } -- ******************************************************* swL2PortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains control information about every port." ::= { swL2PortMgmt 2 } swL2PortCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of control information for each port of the device." INDEX { swL2PortCtrlPortIndex } ::= { swL2PortCtrlTable 1 } SwL2PortCtrlEntry ::= SEQUENCE { swL2PortCtrlPortIndex INTEGER, swL2PortCtrlAdminState INTEGER, swL2PortCtrlNwayState INTEGER, swL2PortCtrlFlowCtrlState INTEGER, swL2PortCtrlCleanStatCounter INTEGER, swL2PortCtrlDescription DisplayString } swL2PortCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCtrlEntry 1 } swL2PortCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the port enabled or disabled." ::= { swL2PortCtrlEntry 2 } swL2PortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swL2PortCtrlEntry 3 } swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set flow control function as enabled or disabled." ::= { swL2PortCtrlEntry 4 } swL2PortCtrlCleanStatCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "As the object is set to active, the statistic counters of this port will be cleared. If set to normal, do nothing." ::= { swL2PortCtrlEntry 5 } swL2PortCtrlDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set port description in displayed string format." ::= { swL2PortCtrlEntry 6 } -- ******************************************************************** -- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } -- ******************************************************************** swL2DiffServTypeCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DiffServTypeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Differentiated Service(DiffServ) type information of each port." ::= { swL2DiffServMgmt 1 } swL2DiffServTypeCtrlEntry OBJECT-TYPE SYNTAX SwL2DiffServTypeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DiffServ type information for each port of the device." INDEX { swL2DiffServTypeCtrlPortIndex } ::= { swL2DiffServTypeCtrlTable 1 } SwL2DiffServTypeCtrlEntry ::= SEQUENCE { swL2DiffServTypeCtrlPortIndex INTEGER, swL2DiffServTypeCtrlDiffServType INTEGER } swL2DiffServTypeCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2DiffServTypeCtrlEntry 1 } swL2DiffServTypeCtrlDiffServType OBJECT-TYPE SYNTAX INTEGER { disabled(1), dscp(2), tos(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DiffServ type of this port. disabled(1) --- no DiffServ and TOS field modification ability. dscp(2) --- indicate the associated port's DSCP control information in swL2DiffServDSCPCtrlTable will take effect for the replacement of DSCP(DiffServ codepoint) field. tos(3) --- indicate the associated port's TOS control information in swL2DiffServTOSCtrlTable will take effect for the relationship of replacement between IP TOS precedence and 802.1p tag control priority field." ::= { swL2DiffServTypeCtrlEntry 2 } -- ******************************************************* swL2DiffServDSCPCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DiffServDSCPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains DSCP (Differentiated Service Code Point) control information." ::= { swL2DiffServMgmt 2 } swL2DiffServDSCPCtrlEntry OBJECT-TYPE SYNTAX SwL2DiffServDSCPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DSCP control information for each port." INDEX { swL2DiffServDSCPCtrlPortIndex } ::= { swL2DiffServDSCPCtrlTable 1 } SwL2DiffServDSCPCtrlEntry ::= SEQUENCE { swL2DiffServDSCPCtrlPortIndex INTEGER, swL2DiffServDSCPCtrlMode INTEGER, swL2DiffServDSCPCtrlValue INTEGER } swL2DiffServDSCPCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2DiffServDSCPCtrlEntry 1 } swL2DiffServDSCPCtrlMode OBJECT-TYPE SYNTAX INTEGER { dscp-Force-Overwrite(1), dscp-Change-If-Zero(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP mode of this port. dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific value regardless of the DSCP of the incoming packet. dscp-Change-If-Zero(2) --- The DSCP field for the IP packet is replaced by the specific value if the DSCP of the incoming packet is zero." ::= { swL2DiffServDSCPCtrlEntry 2 } swL2DiffServDSCPCtrlValue OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP value of this port." ::= { swL2DiffServDSCPCtrlEntry 3 } -- ******************************************************* swL2DiffServTOSCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DiffServTOSCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains TOS (Type Of Service) control information." ::= { swL2DiffServMgmt 3 } swL2DiffServTOSCtrlEntry OBJECT-TYPE SYNTAX SwL2DiffServTOSCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of TOS control information for each port." INDEX { swL2DiffServTOSCtrlPortIndex } ::= { swL2DiffServTOSCtrlTable 1 } SwL2DiffServTOSCtrlEntry ::= SEQUENCE { swL2DiffServTOSCtrlPortIndex INTEGER, swL2DiffServTOSCtrlMode INTEGER, swL2DiffServTOSCtrlValue INTEGER } swL2DiffServTOSCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2DiffServTOSCtrlEntry 1 } swL2DiffServTOSCtrlMode OBJECT-TYPE SYNTAX INTEGER { tos-Force-Overwrite(1), tos-TOS-Overwrite-802dot1p(2), tos-802dot1p-Overwrite-TOS(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The TOS mode of this port. tos-Force-Overwrite(1) --- The IP TOS precedence is changed to the specific value. tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is IPv4 packet, change the 802.1p tag control priority field to the value in IP TOS precedence field. tos-802dot1p-Overwrite-TOS(3) --- If the incoming packet is IPv4 packet, the IP TOS precedence is changed to the value in the 802.1p tag control priority field." ::= { swL2DiffServTOSCtrlEntry 2 } swL2DiffServTOSCtrlValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "this object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)" ::= { swL2DiffServTOSCtrlEntry 3 } -- ******************************************************************** -- swL2PortMirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } -- ******************************************************************** swL2PortMirrorSrcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortMirrorSrcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port snooping entries.Port mirroring function provides an easy way to monitor traffic on any port. In this way any good packets appears on the source mirror port also shows up on the target mirror port and doesn't to reconstruct the LAN." ::= { swL2PortMirrorMgmt 1 } swL2PortMirrorSrcPortEntry OBJECT-TYPE SYNTAX SwL2PortMirrorSrcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set the port to be monitored as source mirror port. " INDEX { swL2PortMirrorIndex } ::= { swL2PortMirrorSrcPortTable 1 } SwL2PortMirrorSrcPortEntry ::= SEQUENCE { swL2PortMirrorIndex Integer32, swL2PortMirrorDirection INTEGER } swL2PortMirrorIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. " ::= { swL2PortMirrorSrcPortEntry 1} swL2PortMirrorDirection OBJECT-TYPE SYNTAX INTEGER { other(1), ingress(2), egress(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object uses to setup what packets will be mirrored." ::= { swL2PortMirrorSrcPortEntry 2 } swL2PortMirrorTargetPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. " ::= { swL2PortMirrorMgmt 2 } swL2PortMirrorState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mirror status. " ::= { swL2PortMirrorMgmt 3 } END