----------------------------------------------------------------------------- -- -- Version 2.07, 2012/03/02, Jerry Qin porting from UIS 1.01 -- Description: -- [New Object] -- Add swL3IpCtrlIpDhcpOption12State and swL3IpCtrlIpDhcpOption12HostName to -- support DHCP option 12 host name function. -- ----------------------------------------------------------------------------- DGS3426P-L3MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress, NOTIFICATION-TYPE, Integer32,Unsigned32 FROM SNMPv2-SMI PhysAddress,TruthValue,DisplayString,RowStatus,MacAddress,TimeStamp FROM SNMPv2-TC dgs3426p FROM SW34XXPRIMGMT-MIB; swL3MgmtMIB MODULE-IDENTITY LAST-UPDATED "201203020000Z" ORGANIZATION " " CONTACT-INFO " " DESCRIPTION "The Structure of Layer 3 Network Management Information for the proprietary enterprise." ::= { dgs3426p 3 } swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 } swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 } swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 } swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } -- ---------------------------------------------------------- -- -- Textual Conventions -- ---------------------------------------------------------- -- -- This definition may be excluded if IPv6 Supported Ipv6Address ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order." SYNTAX OCTET STRING (SIZE (16)) -- ******************************************************************** -- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } -- ******************************************************************** swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 } swL3DevCtrlRIPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled." ::= { swL3DevCtrl 1 } -- ******************************************************************** -- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } -- ******************************************************************** -- swL3IpCtrlIpv4State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv4 function state of the device." -- ::= { swL3IpCtrlMgmt 1 } -- swL3IpCtrlIpv6State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv6 function state of the device." -- ::= { swL3IpCtrlMgmt 2 } swL3IpCtrlAllIpIfState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates all interface function state of the device." ::= { swL3IpCtrlMgmt 7 } swL3IpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain IP interface information." ::= { swL3IpCtrlMgmt 3 } swL3IpCtrlEntry OBJECT-TYPE SYNTAX SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IP interface." INDEX { swL3IpCtrlInterfaceName } ::= { swL3IpCtrlTable 1 } SwL3IpCtrlEntry ::= SEQUENCE { swL3IpCtrlInterfaceName DisplayString, swL3IpCtrlIfIndex INTEGER, swL3IpCtrlIpAddr IpAddress, swL3IpCtrlIpSubnetMask IpAddress, swL3IpCtrlVlanName DisplayString, swL3IpCtrlProxyArp INTEGER, swL3IpCtrlSecondary TruthValue, swL3IpCtrlMode INTEGER, swL3IpCtrlAdminState INTEGER, -- swL3IpCtrlIpv4AdminState -- INTEGER, -- swL3IpCtrlIpv4OperState -- INTEGER, -- swL3IpCtrlIpv6AdminState -- INTEGER, -- swL3IpCtrlIpv6OperState -- INTEGER, swL3IpCtrlIpv6LinkLocalAddress Ipv6Address, swL3IpCtrlIpv6LinkLocalPrefixLen INTEGER, swL3IpCtrlState RowStatus, swL3IpCtrlIpv6LinkLocalAutoState INTEGER, swL3IpCtrlLocalProxyArp INTEGER, swL3IpCtrlDhcpv6ClientState INTEGER, swL3IpCtrlIpDirectedBroadcastState INTEGER, swL3IpCtrlIpDhcpOption12State INTEGER, swL3IpCtrlIpDhcpOption12HostName DisplayString, swL3IpCtrlDhcpv6ClientPDState INTEGER, swL3IpCtrlDhcpv6ClientPDPrefixName DisplayString, swL3IpCtrlDhcpv6ClientPDPrefix Ipv6Address, swL3IpCtrlDhcpv6ClientPDPrefixLen INTEGER } swL3IpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3IpCtrlEntry 1 } swL3IpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the IP interface number in the swL3IpCtrlTable." ::= { swL3IpCtrlEntry 2 } swL3IpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the interface. This object only can take the value of the unicast IP address." ::= { swL3IpCtrlEntry 3 } swL3IpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP net mask for this interface." ::= { swL3IpCtrlEntry 4 } swL3IpCtrlVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table." ::= { swL3IpCtrlEntry 5 } swL3IpCtrlProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates enable/disable of the proxy ARP function for IPv4." ::= { swL3IpCtrlEntry 6 } swL3IpCtrlSecondary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP." ::= { swL3IpCtrlEntry 7 } swL3IpCtrlMode OBJECT-TYPE SYNTAX INTEGER { other(1), bootp(3), dhcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server." ::= { swL3IpCtrlEntry 8 } swL3IpCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IP interface." ::= { swL3IpCtrlEntry 9 } -- swL3IpCtrlIpv4AdminState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The IPv4 admin state of the IP interface. The default state is determined by project. -- This state will only be effective when the swL3IpCtrlAdminState is enabled." -- ::= { swL3IpCtrlEntry 10 } -- swL3IpCtrlIpv4OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv4 operational state of the IP interface. -- If the swL3IpCtrlIpv4State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 11 } -- swL3IpCtrlIpv6AdminState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The IPv6 admin state of the IP interface. The default state is determined by project. -- This state will only be effective when the swL3IpCtrlAdminState is enabled." -- ::= { swL3IpCtrlEntry 12 } -- swL3IpCtrlIpv6OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv6 operational state of the IP interface. -- If the swL3IpCtrlIpv6State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 13 } swL3IpCtrlIpv6LinkLocalAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 link local address for this interface." ::= { swL3IpCtrlEntry 14 } swL3IpCtrlIpv6LinkLocalPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix length for this IPv6 link local address." ::= { swL3IpCtrlEntry 15 } swL3IpCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3IpCtrlEntry 16 } swL3IpCtrlIpv6LinkLocalAutoState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IPv6 link local auto." ::= { swL3IpCtrlEntry 17 } swL3IpCtrlLocalProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If the state is enabled, the switch will be allowed to respond to the proxy ARP proxy ARP when the source IP and destination IP are on the same interface." ::={swL3IpCtrlEntry 18} swL3IpCtrlDhcpv6ClientState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the Dhcpv6 Client." ::= { swL3IpCtrlEntry 20 } swL3IpCtrlIpDirectedBroadcastState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IP Directed Broadcast." ::= { swL3IpCtrlEntry 21 } swL3IpCtrlIpDhcpOption12State OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message." ::= { swL3IpCtrlEntry 22 } swL3IpCtrlIpDhcpOption12HostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12." ::= { swL3IpCtrlEntry 23 } swL3IpCtrlDhcpv6ClientPDState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the Dhcpv6 Client PD." ::= { swL3IpCtrlEntry 24 } swL3IpCtrlDhcpv6ClientPDPrefixName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write." ::= { swL3IpCtrlEntry 25 } swL3IpCtrlDhcpv6ClientPDPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix obtained form delegation router." ::= { swL3IpCtrlEntry 26 } swL3IpCtrlDhcpv6ClientPDPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix length for the prefix obtained from delegation router." ::= { swL3IpCtrlEntry 27 } swL3Ipv6CtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IPv6 information of an IP interface." ::= { swL3IpCtrlMgmt 4 } swL3Ipv6CtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPv6 information about a specific IP interface." INDEX { swL3Ipv6CtrlInterfaceName } ::= { swL3Ipv6CtrlTable 1 } SwL3Ipv6CtrlEntry ::= SEQUENCE { swL3Ipv6CtrlInterfaceName DisplayString, swL3Ipv6CtrlMaxReassmblySize INTEGER, swL3Ipv6CtrlNsRetransTimer Unsigned32, -- swL3Ipv6CtrlRsState -- INTEGER, swL3Ipv6CtrlRaState INTEGER, swL3Ipv6CtrlRaMinRtrAdvInterval INTEGER, swL3Ipv6CtrlRaMaxRtrAdvInterval INTEGER, swL3Ipv6CtrlRaLifeTime INTEGER, swL3Ipv6CtrlRaReachableTime INTEGER, swL3Ipv6CtrlRaRetransTime Unsigned32, swL3Ipv6CtrlRaHopLimit INTEGER, swL3Ipv6CtrlRaManagedFlag INTEGER, swL3Ipv6CtrlRaOtherConfigFlag INTEGER } swL3Ipv6CtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3Ipv6CtrlEntry 1 } swL3Ipv6CtrlMaxReassmblySize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Reassembly Size of the IP interface." ::= { swL3Ipv6CtrlEntry 2 } swL3Ipv6CtrlNsRetransTimer OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor solicitation's retransmit timer. The unit is set in milliseconds." ::= { swL3Ipv6CtrlEntry 3 } -- swL3Ipv6CtrlRsState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Router solicited state." -- ::= { swL3Ipv6CtrlEntry 4 } swL3Ipv6CtrlRaState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor solicited state." ::= { swL3Ipv6CtrlEntry 5 } swL3Ipv6CtrlRaMinRtrAdvInterval OBJECT-TYPE SYNTAX INTEGER (3..1350) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvInterval" ::= { swL3Ipv6CtrlEntry 6 } swL3Ipv6CtrlRaMaxRtrAdvInterval OBJECT-TYPE SYNTAX INTEGER (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds." DEFVAL {600} ::= { swL3Ipv6CtrlEntry 7 } swL3Ipv6CtrlRaLifeTime OBJECT-TYPE SYNTAX INTEGER (0..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the lifetime of the router as the default router." ::= { swL3Ipv6CtrlEntry 8 } swL3Ipv6CtrlRaReachableTime OBJECT-TYPE SYNTAX INTEGER (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation." ::= { swL3Ipv6CtrlEntry 9 } swL3Ipv6CtrlRaRetransTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond." ::= { swL3Ipv6CtrlEntry 10 } swL3Ipv6CtrlRaHopLimit OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message." ::= { swL3Ipv6CtrlEntry 11 } swL3Ipv6CtrlRaManagedFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration." ::= { swL3Ipv6CtrlEntry 12 } swL3Ipv6CtrlRaOtherConfigFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information." ::= { swL3Ipv6CtrlEntry 13 } swL3Ipv6AddressCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain IPv6 address information for each IP interface." ::= { swL3IpCtrlMgmt 5 } swL3Ipv6AddressCtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IPv6 address." INDEX { swL3Ipv6AddressCtrlInterfaceName, swL3Ipv6Address, swL3Ipv6AddressCtrlPrefixLen } ::= { swL3Ipv6AddressCtrlTable 1 } SwL3Ipv6AddressCtrlEntry ::= SEQUENCE { swL3Ipv6AddressCtrlInterfaceName DisplayString, swL3Ipv6Address Ipv6Address, swL3Ipv6AddressCtrlPrefixLen INTEGER, swL3Ipv6AddressCtrlPreferredLifeTime Unsigned32, swL3Ipv6AddressCtrlValidLifeTime Unsigned32, swL3Ipv6AddressCtrlOnLinkFlag INTEGER, swL3Ipv6AddressCtrlAutonomousFlag INTEGER, swL3Ipv6AddressCtrlState RowStatus, swL3Ipv6AddressCtrlAddressType INTEGER } swL3Ipv6AddressCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface. " ::= { swL3Ipv6AddressCtrlEntry 1 } swL3Ipv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 2 } swL3Ipv6AddressCtrlPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the prefix length of this IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 3 } swL3Ipv6AddressCtrlPreferredLifeTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff." ::= { swL3Ipv6AddressCtrlEntry 4 } swL3Ipv6AddressCtrlValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff." ::= { swL3Ipv6AddressCtrlEntry 5 } swL3Ipv6AddressCtrlOnLinkFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the address implied by the specified prefix is available on the link where the RA message is received." ::= { swL3Ipv6AddressCtrlEntry 6 } swL3Ipv6AddressCtrlAutonomousFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the specified prefix will be used to create an autonomous address configuration." ::= { swL3Ipv6AddressCtrlEntry 7 } swL3Ipv6AddressCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3Ipv6AddressCtrlEntry 8 } swL3Ipv6AddressCtrlAddressType OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcpv6(2), stateless(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement." ::= { swL3Ipv6AddressCtrlEntry 9 } swL3Ipv6DHCPv6CPDAddrCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6DHCPv6CPDAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain the information of the IPv6 address which based on DHCPv6 client PD." ::= { swL3IpCtrlMgmt 6 } swL3Ipv6DHCPv6CPDAddrCtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6DHCPv6CPDAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific DHCPv6 Client PD IPv6 address." INDEX { swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName, swL3Ipv6DHCPv6CPDAddrCtrlPrefixName, swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr, swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen } ::= { swL3Ipv6DHCPv6CPDAddrCtrlTable 1 } SwL3Ipv6DHCPv6CPDAddrCtrlEntry ::= SEQUENCE { swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName DisplayString, swL3Ipv6DHCPv6CPDAddrCtrlPrefixName DisplayString, swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr Ipv6Address, swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen INTEGER, swL3Ipv6DHCPv6CPDAddrCtrlState RowStatus } swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface. " ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 1 } swL3Ipv6DHCPv6CPDAddrCtrlPrefixName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the prefix based on which the IPv6 address will be generate. " ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 2 } swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the suffix of the IPv6 address." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 3 } swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the prefix length of this IPv6 address." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 4 } swL3Ipv6DHCPv6CPDAddrCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 5 } -- ******************************************************************** -- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- ******************************************************************** swL3IpFdbInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets." ::= { swL3IpFdbMgmt 1 } swL3IpFdbInfoEntry OBJECT-TYPE SYNTAX SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific IP address for which the bridge has some forwarding and/or filtering information." INDEX { swL3IpFdbInfoIpAddr } ::= { swL3IpFdbInfoTable 1 } SwL3IpFdbInfoEntry ::= SEQUENCE { -- swL3IpFdbInfoRdIndex -- INTEGER, swL3IpFdbInfoIpAddr IpAddress, swL3IpFdbInfoIpSubnetMask IpAddress, swL3IpFdbInfoPort INTEGER, swL3IpFdbInfoType INTEGER } -- swL3IpFdbInfoRdIndex OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The object indicates the IP routing domain index, and should -- be associated with one of swL3IpDomainStatsIndex." -- ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP address for which switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP net mask for this interface.for which switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 2 } swL3IpFdbInfoPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address." ::= { swL3IpFdbInfoEntry 3 } swL3IpFdbInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), dynamic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry." ::= { swL3IpFdbInfoEntry 4 } -- ******************************************************************** -- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 } -- ******************************************************************** swL3IpArpAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period in minutes for aging out dynamically learned arp information." ::= { swL3IpMgmt 4 } -- ******************************************************************** -- swL3IpStaticRouteTable OBJECT IDENTIFIER ::= { swL3IpMgmt 5 } -- ******************************************************************** swL3IpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP static Routing table." ::= { swL3IpMgmt 5 } swL3IpStaticRouteEntry OBJECT-TYPE SYNTAX SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action." INDEX { swL3IpStaticRouteDest, swL3IpStaticRouteMask, swL3IpStaticRouteNextHop } ::= { swL3IpStaticRouteTable 1 } SwL3IpStaticRouteEntry ::= SEQUENCE { swL3IpStaticRouteDest IpAddress, swL3IpStaticRouteMask IpAddress, swL3IpStaticRouteBkupState INTEGER, swL3IpStaticRouteNextHop IpAddress, swL3IpStaticRouteMetric INTEGER, swL3IpStaticRouteStatus INTEGER } swL3IpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x." ::= { swL3IpStaticRouteEntry 1 } swL3IpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest." ::= { swL3IpStaticRouteEntry 2 } swL3IpStaticRouteBkupState OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing state for this route.The value SHOULD be primary(1) or backup(2)." ::= { swL3IpStaticRouteEntry 3 } swL3IpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { swL3IpStaticRouteEntry 4 } swL3IpStaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing metric for this route." ::= { swL3IpStaticRouteEntry 5 } swL3IpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3), active(4), inActive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table." ::= { swL3IpStaticRouteEntry 6 } -- ******************************************************************** -- swL3Ipv6StaticRouteTable OBJECT IDENTIFIER ::= { swL3IpMgmt 6 } -- ******************************************************************** -- swL3Ipv6StaticRouteTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3Ipv6StaticRouteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This entity's IP static Routing table." -- ::= { swL3IpMgmt 6 } -- -- swL3Ipv6StaticRouteEntry OBJECT-TYPE -- SYNTAX SwL3Ipv6StaticRouteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A particular route to a particular destination, under a particular policy. -- Once an entry be built,it shouldn't be modified.That is,it just support create and -- delete action." -- INDEX { -- swL3Ipv6StaticRouteDest, -- swL3Ipv6StaticRouteMask, -- swL3Ipv6StaticRouteNextHop -- } -- ::= { swL3Ipv6StaticRouteTable 1 } -- -- SwL3Ipv6StaticRouteEntry ::= -- SEQUENCE { -- swL3Ipv6StaticRouteDest -- Ipv6Address, -- swL3Ipv6StaticRouteMask -- Ipv6Address, -- swL3Ipv6StaticRouteNextHop -- Ipv6Address, -- swL3Ipv6StaticRouteMetric -- INTEGER, -- swL3Ipv6StaticRouteStatus -- INTEGER -- } -- -- swL3Ipv6StaticRouteDest OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The destination IP address of this route. -- -- This object may not take a Multicast (Class D) -- address value. -- -- Any assignment (implicit or otherwise) of an -- instance of this object to a value x must be -- rejected if the bitwise logical-AND of x with -- the value of the corresponding instance of the -- swL3Ipv6StaticRouteMask object is not equal to x." -- ::= { swL3Ipv6StaticRouteEntry 1 } -- -- swL3Ipv6StaticRouteMask OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicate the mask to be logical-ANDed with the -- destination address before being compared to -- the value in the swL3IpStaticRouteDest field. -- For those systems that do not support arbitrary -- subnet masks, an agent constructs the value of -- the swL3IpStaticRouteMask by reference to the IP -- Address Class. -- -- Any assignment (implicit or otherwise) of an -- instance of this object to a value x must be -- rejected if the bitwise logical-AND of x with -- the value of the corresponding instance of the -- swL3IpStaticRouteDest object is not equal to -- swL3IpStaticRouteDest." -- ::= { swL3Ipv6StaticRouteEntry 2 } -- -- swL3Ipv6StaticRouteNextHop OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "On remote routes, the address of the next sys- -- tem en route; Otherwise, 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0" -- ::= { swL3Ipv6StaticRouteEntry 3 } -- -- -- swL3Ipv6StaticRouteMetric OBJECT-TYPE -- SYNTAX INTEGER (1..65535) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The routing metric for this route." -- ::= { swL3Ipv6StaticRouteEntry 4 } -- -- -- swL3Ipv6StaticRouteStatus OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- invalid(2), -- valid(3) -- } -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- invalid(2) - writing this value to the object, and then the -- corresponding entry will be removed from the table. -- valid(3) - this entry is reside in the table." -- ::= { swL3Ipv6StaticRouteEntry 5 } -- -- ******************************************************************** -- swL3ArpCtrlIpv6Table OBJECT IDENTIFIER ::= { swL3IpMgmt 7 } -- ******************************************************************** -- -- swL3ArpCtrlIpv6Table OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3ArpCtrlIpv6Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table contain IPV6 interface information." -- ::= { swL3IpMgmt 7 } -- -- swL3ArpCtrlIpv6Entry OBJECT-TYPE -- SYNTAX SwL3ArpCtrlIpv6Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information about a specific IPV6 interface." -- INDEX { swL3ArpCtrlIpv6IfIndex, swL3ArpCtrlIpv6IpAddr } -- ::= { swL3ArpCtrlIpv6Table 1 } -- -- -- SwL3ArpCtrlIpv6Entry ::= -- SEQUENCE { -- swL3ArpCtrlIpv6IfIndex -- INTEGER, -- swL3ArpCtrlIpv6IpAddr -- Ipv6Address, -- swL3ArpCtrlIpv6MacAddr -- PhysAddress, -- swL3ArpCtrlIpv6Type -- INTEGER -- -- } -- -- swL3ArpCtrlIpv6IfIndex OBJECT-TYPE -- SYNTAX INTEGER(1..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the name of the Arp entry." -- ::= { swL3ArpCtrlIpv6Entry 1 } -- -- swL3ArpCtrlIpv6IpAddr OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The IP address of the art entry. This object only can take the -- value of the unicast IP address." -- ::= { swL3ArpCtrlIpv6Entry 2 } -- -- swL3ArpCtrlIpv6MacAddr OBJECT-TYPE -- SYNTAX PhysAddress -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The MAC address of the art entry. This object only can take the -- value of the unicast MAC address or multicast MAC address." -- ::= { swL3ArpCtrlIpv6Entry 3 } -- -- swL3ArpCtrlIpv6Type OBJECT-TYPE -- SYNTAX INTEGER{ -- other(1), -- invalid(2), -- dynamic(3), -- static(4) -- } -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The MAC address of the arp entry. This object only can take the -- value of the unicast MAC address." -- ::= { swL3ArpCtrlIpv6Entry 4 } -- ******************************************************************** swL3RelayDhcpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 } -- ******************************************************************** swL3RelayDhcpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates Dhcp Relay function is enabled or disabled." ::= { swL3RelayDhcpMgmt 1 } swL3RelayDhcpHopCount OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of router hops that the BOOTP packets can cross." ::= { swL3RelayDhcpMgmt 2 } swL3RelayDhcpTimeThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum time in seconds within which the switch must relay the Dhcp request. If this time is exceeded, the switch will drop the Dhcp packet." ::= { swL3RelayDhcpMgmt 3 } swL3RelayDhcpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RelayDhcpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the IP address as a destination to forward (relay) DHCP packets to." ::= { swL3RelayDhcpMgmt 4 } swL3RelayDhcpCtrlEntry OBJECT-TYPE SYNTAX SwL3RelayDhcpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the IP address as a destination to forward (relay) DHCP packets to." INDEX { swL3RelayDhcpCtrlInterfaceName, swL3RelayDhcpCtrlServer} ::= { swL3RelayDhcpCtrlTable 1 } SwL3RelayDhcpCtrlEntry ::= SEQUENCE { swL3RelayDhcpCtrlInterfaceName DisplayString, swL3RelayDhcpCtrlServer IpAddress, swL3RelayDhcpCtrlState INTEGER } swL3RelayDhcpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the IP interface." ::= { swL3RelayDhcpCtrlEntry 1 } swL3RelayDhcpCtrlServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCP server IP address." ::= { swL3RelayDhcpCtrlEntry 2 } swL3RelayDhcpCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL3RelayDhcpCtrlEntry 3 } swL3RelayDhcpOption82State OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DHCP Relay Option 82 function is enabled or disabled." ::= { swL3RelayDhcpMgmt 5 } swL3RelayDhcpOption82CheckState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DHCP Relay Option 82 Check function is enabled or disabled." ::= { swL3RelayDhcpMgmt 6 } swL3RelayDhcpOption82Policy OBJECT-TYPE SYNTAX INTEGER { replace(0), drop(1), keep(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DHCP Relay Option 82 Policy." ::= { swL3RelayDhcpMgmt 7 } -- ******************************************************************** -- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } -- ******************************************************************** swL3RelayDnsState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DNS Relay function is enabled or disabled." ::= { swL3RelayDnsMgmt 1 } swL3RelayDnsPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the primary DNS server." ::= { swL3RelayDnsMgmt 2 } swL3RelayDnsSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the secondary DNS server." ::= { swL3RelayDnsMgmt 3 } swL3RelayDnsCacheState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DNS Relay cache is enabled or disabled." ::= { swL3RelayDnsMgmt 4 } swL3RelayDnsStaticTableState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DNS Relay static table is enabled or disabled." ::= { swL3RelayDnsMgmt 5 } swL3RelayDnsCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table display the current DNS relay static table." ::= { swL3RelayDnsMgmt 6 } swL3RelayDnsCtrlEntry OBJECT-TYPE SYNTAX SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information display the current DNS relay static table." INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr} ::= { swL3RelayDnsCtrlTable 1 } SwL3RelayDnsCtrlEntry ::= SEQUENCE { swL3RelayDnsCtrlDomainName DisplayString, swL3RelayDnsCtrlIpAddr IpAddress, swL3RelayDnsCtrlState INTEGER } swL3RelayDnsCtrlDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The domain name of the entry." ::= { swL3RelayDnsCtrlEntry 1 } swL3RelayDnsCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the entry." ::= { swL3RelayDnsCtrlEntry 2 } swL3RelayDnsCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL3RelayDnsCtrlEntry 3 } -- ******************************************************************** swL3DHCPRelayOption60 OBJECT IDENTIFIER ::= { swL3RelayDhcpMgmt 8 } -- ******************************************************************** swL3DHCPRelayOption60State OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DHCP relay option 60 function is enabled or disabled. " ::= { swL3DHCPRelayOption60 1 } swL3DHCPRelayOption60DefMode OBJECT-TYPE SYNTAX INTEGER { relay(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates default mode that has no option 60 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption60DefRelayIp. drop(2): means to drop the packet. " ::= { swL3DHCPRelayOption60 2 } swL3DHCPRelayOption60DefTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3DHCPRelayOption60DefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the default relay servers for the packet that has no option 60 mathcing rules. " ::= { swL3DHCPRelayOption60 3 } swL3DHCPRelayOption60DefEntry OBJECT-TYPE SYNTAX SwL3DHCPRelayOption60DefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information indicates the default relay servers for the packet that has no option 60 mathcing rules. " INDEX { swL3DHCPRelayOption60DefRelayIp } ::= { swL3DHCPRelayOption60DefTable 1 } SwL3DHCPRelayOption60DefEntry ::= SEQUENCE { swL3DHCPRelayOption60DefRelayIp IpAddress, swL3DHCPRelayOption60DefRowStatus RowStatus } swL3DHCPRelayOption60DefRelayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address of default relay server." ::= { swL3DHCPRelayOption60DefEntry 1 } swL3DHCPRelayOption60DefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3DHCPRelayOption60DefEntry 2 } swL3DHCPRelayOption60Table OBJECT-TYPE SYNTAX SEQUENCE OF SwL3DHCPRelayOption60Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the relay servers for the packet at option 60 rules." ::= { swL3DHCPRelayOption60 4 } swL3DHCPRelayOption60Entry OBJECT-TYPE SYNTAX SwL3DHCPRelayOption60Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information indicates the relay servers for the packet at option 60 rules." INDEX { swL3DHCPRelayOption60String,swL3DHCPRelayOption60RelayIp } ::= { swL3DHCPRelayOption60Table 1 } SwL3DHCPRelayOption60Entry ::= SEQUENCE { swL3DHCPRelayOption60String DisplayString, swL3DHCPRelayOption60RelayIp IpAddress, swL3DHCPRelayOption60MatchType INTEGER, swL3DHCPRelayOption60RowStatus RowStatus } swL3DHCPRelayOption60String OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string." ::= { swL3DHCPRelayOption60Entry 1 } swL3DHCPRelayOption60RelayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address of relay server." ::= { swL3DHCPRelayOption60Entry 2 } swL3DHCPRelayOption60MatchType OBJECT-TYPE SYNTAX INTEGER { exact(1), partial(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates match state of this entry. exact(1): means the option 60 string in the packet must full match with the specified string. partial(2): means the option 60 string in the packet only need partial match with the specified string. " ::= { swL3DHCPRelayOption60Entry 3 } swL3DHCPRelayOption60RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3DHCPRelayOption60Entry 4 } -- ----------------------------------------------------------------------------- -- swL3DHCPRelayOption61 OBJECT IDENTIFIER ::= { swL3RelayDhcpMgmt 9 } -- ----------------------------------------------------------------------------- swL3DHCPRelayOption61 OBJECT IDENTIFIER ::= { swL3RelayDhcpMgmt 9 } swL3DHCPRelayOption61State OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DHCP relay option 61 function is enabled or disabled. " ::= { swL3DHCPRelayOption61 1 } swL3DHCPRelayOption61DefMode OBJECT-TYPE SYNTAX INTEGER { relay(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates default mode that has no option 61 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61DefRelayIp. drop(2): means to drop the packet. " ::= { swL3DHCPRelayOption61 2 } swL3DHCPRelayOption61DefRelayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP address of default relay server that has no option 61 mathcing rules. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'. " ::= { swL3DHCPRelayOption61 3 } swL3DHCPRelayOption61Table OBJECT-TYPE SYNTAX SEQUENCE OF SwL3DHCPRelayOption61Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the relay servers for the packet at option 61 rules." ::= { swL3DHCPRelayOption61 4 } swL3DHCPRelayOption61Entry OBJECT-TYPE SYNTAX SwL3DHCPRelayOption61Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information indicates the relay servers for the packet at option 61 rules. " INDEX { swL3DHCPRelayOption61ClientType,swL3DHCPRelayOption61ClientID } ::= { swL3DHCPRelayOption61Table 1 } SwL3DHCPRelayOption61Entry ::= SEQUENCE { swL3DHCPRelayOption61ClientType INTEGER, swL3DHCPRelayOption61ClientID DisplayString, swL3DHCPRelayOption61Mode INTEGER, swL3DHCPRelayOption61RelayIp IpAddress, swL3DHCPRelayOption61RowStatus RowStatus } swL3DHCPRelayOption61ClientType OBJECT-TYPE SYNTAX INTEGER { mac(1), string(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates client type of this entry. mac(1): means the client-ID which is the MAC address of client. string(2): means the client-ID which is specified string by administrator. " ::= { swL3DHCPRelayOption61Entry 1 } swL3DHCPRelayOption61ClientID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates string of this entry. When swL3DHCPRelayOption61ClientType is mac(1), the format of this object should be XX-XX-XX-XX-XX-XX (MAC address). Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string. " ::= { swL3DHCPRelayOption61Entry 2 } swL3DHCPRelayOption61Mode OBJECT-TYPE SYNTAX INTEGER { relay(1), drop(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates mode of this entry. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61RelayIp. drop(2): means to drop the packet. " ::= { swL3DHCPRelayOption61Entry 3 } swL3DHCPRelayOption61RelayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP address of relay server. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'. " ::= { swL3DHCPRelayOption61Entry 4 } swL3DHCPRelayOption61RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3DHCPRelayOption61Entry 5 } -- ******************************************************************** -- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 } -- ******************************************************************** swL3RouteRedistriTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol." ::= { swL3MgmtMIB 5 } swL3RouteRedistriEntry OBJECT-TYPE SYNTAX SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the route redistribution table." INDEX { swL3RouteRedistriSrcProtocol, swL3RouteRedistriDstProtocol} ::= { swL3RouteRedistriTable 1 } SwL3RouteRedistriEntry ::= SEQUENCE { swL3RouteRedistriSrcProtocol INTEGER, swL3RouteRedistriDstProtocol INTEGER, swL3RouteRedistriMetric INTEGER, swL3RouteRedistriRowStatus RowStatus } swL3RouteRedistriSrcProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), static(4), local(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the source device." ::= { swL3RouteRedistriEntry 1 } swL3RouteRedistriDstProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rip(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the destination device." ::= { swL3RouteRedistriEntry 2 } swL3RouteRedistriMetric OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value." ::= { swL3RouteRedistriEntry 4 } swL3RouteRedistriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3RouteRedistriEntry 5 } -- **************************************************************************** swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } swL3RoutePreferenceRIP OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of RIP." ::= { swL3RoutePreference 1 } swL3RoutePreferenceStatic OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of Static." ::= { swL3RoutePreference 3 } swL3RoutePreferenceLocal OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to read the route preference of Local." ::= { swL3RoutePreference 4 } swL3RoutePreferenceDefault OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of Default." ::= { swL3RoutePreference 8 } END