-- ----------------------------------------------------------------------------- -- MIB NAME : DGS-3000-28SC L2MGMT mib -- FILE NAME: L2mgmtDgs3000-28SC.mib -- DATE : 2014/10/14 -- VERSION : 1.03 -- PURPOSE : To construct the MIB structure of L2MGMT -- ----------------------------------------------------------------------------- -- MODIFICTION HISTORY: -- ----------------------------------------------------------------------------- -- Version 1.03 -- 2014/10/14 -- Request by Wesley Wang for DGS-3000-28SC -- [Modification] -- Add swL2IGMPAccessAuthTable to support IGMP authentication for DGS-3000-28SC. -- ----------------------------------------------------------------------------- -- Version 1.02 -- 2014/09/29 -- Request by Smile Xu for DGS-3000 -- [Modification] -- modify the swL2MirrorGroupSourceEngress to swL2MirrorGroupSourceEgress; -- modify the description of swL2MirrorLogicTargetPort; -- modify the syntax value list of swL2MirrorGroupState from -- INTEGER{enabled(1),disabled(2)} to -- INTEGER{other(1),disabled(2),enabled(3)}. -- ----------------------------------------------------------------------------- -- Version 1.01 2014/09/02 -- [New Object] -- Add the object swL2PortLinkTimeTable For DGS-3000. -- ----------------------------------------------------------------------------- -- Version 1.00, 2014/08/18 -- This is the first version. -- ----------------------------------------------------------------------------- DGS3000-28SC-L2MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress , TimeTicks , Integer32, Unsigned32, MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI DisplayString,RowStatus,TruthValue FROM SNMPv2-TC Counter FROM RFC1155-SMI --PortList FROM Q-BRIDGE-MIB AgentNotifyLevel FROM DLINK-ID-REC-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC dlink-Dgs3000Proj-DGS3000-28SCax FROM SWDGS3000PRIMGMT-MIB swPortSecPortIndex FROM PORT-SECURITY-MIB dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier FROM IEEE8021-CFM-MIB; swL2MgmtMIB MODULE-IDENTITY LAST-UPDATED "201410141006Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "The Structure of Layer 2 Network Management Information." ::= { dlink-Dgs3000Proj-DGS3000-28SCax 2 } MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order, copy from RFC1493 VlanId ::= INTEGER (1..4094) PortList ::= OCTET STRING(SIZE (0..127)) swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 } swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } swL2LoopDetectMgmt OBJECT IDENTIFIER::= { swL2MgmtMIB 18 } swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 } -- -- *********************************************************** -- -- Textual Conventions -- -- *********************************************************** IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable." REFERENCE "[IEEE802.3], Section 30.6.1.1.5" SYNTAX BITS{ bOther(0), -- other or unknown b10baseT(1), -- 10BASE-T half duplex mode b10baseTFD(2), -- 10BASE-T full duplex mode b100baseT4(3), -- 100BASE-T4 b100baseTX(4), -- 100BASE-TX half duplex mode b100baseTXFD(5), -- 100BASE-TX full duplex mode b100baseT2(6), -- 100BASE-T2 half duplex mode b100baseT2FD(7), -- 100BASE-T2 full duplex mode bFdxPause(8), -- PAUSE for full-duplex links bFdxAPause(9), -- Asymmetric PAUSE for full-duplex -- links bFdxSPause(10), -- Symmetric PAUSE for full-duplex -- links bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for -- full-duplex links b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half -- duplex mode b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full -- duplex mode b1000baseT(14), -- 1000BASE-T half duplex mode b1000baseTFD(15) -- 1000BASE-T full duplex mode } -- ----------------------------------------------------------------------------- -- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } -- ----------------------------------------------------------------------------- swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 } swDevInfoTotalNumOfPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports within this switch. This value is the sum of the ports within this switch." ::= { swL2DevInfo 1 } swDevInfoNumOfPortInUse OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in this switch connected to the segment or the end stations." ::= { swL2DevInfo 2 } swDevModuleInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDevModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the module information." ::= { swL2DevInfo 3 } swDevModuleInfoEntry OBJECT-TYPE SYNTAX SwDevModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of management information for each unit in the system." -- INDEX { swDevModuleInfoUnitID, swDevModuleInfoModuleID } INDEX { swDevModuleInfoUnitID } ::= { swDevModuleInfoTable 1} SwDevModuleInfoEntry ::= SEQUENCE { swDevModuleInfoUnitID INTEGER, -- swDevModuleInfoModuleID -- INTEGER, swDevModuleInfoModuleName DisplayString, swDevModuleInfoReversion DisplayString, swDevModuleInfoSerial DisplayString, swDevModuleInfoDescription DisplayString } swDevModuleInfoUnitID OBJECT-TYPE SYNTAX INTEGER (1..12) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the specific unit ID in the stacking/chassis table." ::= { swDevModuleInfoEntry 1 } -- swDevModuleInfoModuleID OBJECT-TYPE -- SYNTAX INTEGER (1..4) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This object indicates the module ID of this unit." -- ::= { swDevModuleInfoEntry 2 } swDevModuleInfoModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "A text string containing the name of the module. " ::= { swDevModuleInfoEntry 3 } swDevModuleInfoReversion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A text string containing the version (name or number) of the module." ::= { swDevModuleInfoEntry 4 } swDevModuleInfoSerial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) MAX-ACCESS read-only STATUS current DESCRIPTION "A text string containing the serial number or serial name of the module." ::= { swDevModuleInfoEntry 5 } swDevModuleInfoDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A text string containing a description of the module. " ::= { swDevModuleInfoEntry 6 } -- ----------------------------------------------------------------------------- swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 } swL2DevCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable the spanning tree algorithm during the runtime of the system." ::= { swL2DevCtrl 1 } swL2DevCtrlIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled." ::= { swL2DevCtrl 2 } swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the IGMP snooping forward multicast routing only state." ::= { swL2DevCtrl 3 } swL2DevCtrlRmonState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable RMON." ::= { swL2DevCtrl 4 } swL2DevCtrlSnmpTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the SNMP trap status." ::= { swL2DevCtrl 5 } swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur." ::= { swL2DevCtrl 6 } swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system." ::= { swL2DevCtrl 7 } swL2MACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable MAC Notification." ::= { swL2DevCtrl 8 } swL2MACNotifyHistorySize OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1." ::= { swL2DevCtrl 9 } swL2MACNotifyInterval OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the time interval, in seconds, that will trigger MAC notification messages." ::= { swL2DevCtrl 10 } swL2DevCtrlAsymVlanState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables asymmetric VLANs during the runtime of the system." ::= { swL2DevCtrl 13 } -- ----------------------------------------------------------------------------- swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 } swL2DevCtrlTelnetState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Telnet status." ::= { swL2DevCtrlTelnet 1 } swL2DevCtrlTelnetTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Telnet is disabled, this object is not accessible." ::= { swL2DevCtrlTelnet 2 } -- ----------------------------------------------------------------------------- swL2DevCtrlManagementVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls which previously created VLANs are included in the System IP Interface." ::= { swL2DevCtrl 16 } -- ----------------------------------------------------------------------------- swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 } swL2DevCtrlWebState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Web status." ::= { swL2DevCtrlWeb 1 } swL2DevCtrlWebTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Web is disabled, this object is not accessible." ::= { swL2DevCtrlWeb 2 } swL2DevCtrlLLDPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. " ::= { swL2DevCtrl 18 } swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. " DEFVAL {disabled} ::={swL2DevCtrl 19} swL2DevCtrlIpAutoconfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the IP auto configuration state." ::= { swL2DevCtrl 20 } -- ----------------------------------------------------------------------------- swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 } swL2DevCtrlCFMState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM global state." ::={swL2DevCtrlCFM 1} swL2DevCtrlCFMPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the CFM state of specified ports." ::= { swL2DevCtrlCFM 2 } swL2DevCtrlCFMPortEntry OBJECT-TYPE SYNTAX SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the CFM state on specified ports." INDEX { swL2DevCtrlCFMPortIndex } ::= { swL2DevCtrlCFMPortTable 1 } SwL2DevCtrlCFMPortEntry ::= SEQUENCE { swL2DevCtrlCFMPortIndex INTEGER, swL2DevCtrlCFMPortState INTEGER } swL2DevCtrlCFMPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the port number." ::= { swL2DevCtrlCFMPortEntry 1 } swL2DevCtrlCFMPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM state by port." ::= { swL2DevCtrlCFMPortEntry 2 } swL2DevCtrlCFMMaTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DevCtrlCFMMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the CFM mode of specified MAs." ::= { swL2DevCtrlCFM 3 } swL2DevCtrlCFMMaEntry OBJECT-TYPE SYNTAX SwL2DevCtrlCFMMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the CFM mode on specified MAs." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex } ::= { swL2DevCtrlCFMMaTable 1 } SwL2DevCtrlCFMMaEntry ::= SEQUENCE { swL2DevCtrlCFMMaMode INTEGER } swL2DevCtrlCFMMaMode OBJECT-TYPE SYNTAX INTEGER { software(1), hardware(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM mode by MA." ::= { swL2DevCtrlCFMMaEntry 1 } swL2DevCtrlCFMMepTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DevCtrlCFMMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the CFM mode of specified MEPs." ::= { swL2DevCtrlCFM 4 } swL2DevCtrlCFMMepEntry OBJECT-TYPE SYNTAX SwL2DevCtrlCFMMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the CFM mode on specified MEPs." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { swL2DevCtrlCFMMepTable 1 } SwL2DevCtrlCFMMepEntry ::= SEQUENCE { swL2DevCtrlCFMMepMode INTEGER } swL2DevCtrlCFMMepMode OBJECT-TYPE SYNTAX INTEGER { software(1), hardware(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the CFM mode by MEP." ::= { swL2DevCtrlCFMMepEntry 1 } -- ----------------------------------------------------------------------------- swL2DevCtrlVLANTrunkState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the global state of the VLAN trunking feature of the device." ::={swL2DevCtrl 22} -- ----------------------------------------------------------------------------- swL2DevCtrlIpAutoconfigTimeout OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the timeout for the auto configuration." DEFVAL {50} ::= { swL2DevCtrl 23 } -- ----------------------------------------------------------------------------- swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 } swL2DevAlarmNewRoot OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap." ::= { swL2DevAlarm 1 } swL2DevAlarmTopologyChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state." ::= { swL2DevAlarm 2 } swL2DevAlarmLinkChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state." ::= { swL2DevAlarm 3 } -- ----------------------------------------------------------------------------- -- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } -- ----------------------------------------------------------------------------- swL2VlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { swL2VLANMgmt 1 } swL2VlanStaticEntry OBJECT-TYPE SYNTAX SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into this device by (local or network) management." INDEX { swL2VlanIndex } ::= { swL2VlanStaticTable 1 } SwL2VlanStaticEntry ::= SEQUENCE { swL2VlanIndex VlanId, swL2VLANAdvertisement INTEGER } swL2VlanIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN-ID or other identifier referring to this VLAN." ::= { swL2VlanStaticEntry 1 } swL2VLANAdvertisement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the advertisement is active or not." ::= { swL2VlanStaticEntry 2 } swL2PVIDAutoAssignmentState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'." ::= { swL2VLANMgmt 2 } swL2VlanPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the VLAN and port role information of each port." ::= { swL2VLANMgmt 3 } swL2VlanPortInfoEntry OBJECT-TYPE SYNTAX SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of VLAN port information." INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid } ::= { swL2VlanPortInfoTable 1 } SwL2VlanPortInfoEntry ::= SEQUENCE { swL2VlanPortInfoPortIndex INTEGER, swL2VlanPortInfoVid VlanId, swL2VlanPortInfoPortRole INTEGER } swL2VlanPortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { swL2VlanPortInfoEntry 1 } swL2VlanPortInfoVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID assigned to a special port" ::= { swL2VlanPortInfoEntry 2 } swL2VlanPortInfoPortRole OBJECT-TYPE SYNTAX INTEGER { other(1), untagged(2), tagged(3), dynamic(4), forbidden(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN." ::= { swL2VlanPortInfoEntry 3 } swL2SubnetVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2SubnetVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the subnet VLAN information." ::= { swL2VLANMgmt 4 } swL2SubnetVLANEntry OBJECT-TYPE SYNTAX SwL2SubnetVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of subnet VLAN information." INDEX { swL2SubnetVLANIPAddress,swL2SubnetVLANIPMask } ::= { swL2SubnetVLANTable 1 } SwL2SubnetVLANEntry ::= SEQUENCE { swL2SubnetVLANIPAddress IpAddress, swL2SubnetVLANIPMask IpAddress, swL2SubnetVLANID VlanId, swL2SubnetVLANPriority INTEGER, swL2SubnetVLANRowStatus RowStatus } swL2SubnetVLANIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP address." ::= { swL2SubnetVLANEntry 1 } swL2SubnetVLANIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IP mask." ::= { swL2SubnetVLANEntry 2 } swL2SubnetVLANID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VLAN ID." ::= { swL2SubnetVLANEntry 3 } swL2SubnetVLANPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the priority." ::= { swL2SubnetVLANEntry 4 } swL2SubnetVLANRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2SubnetVLANEntry 5 } swL2VlanPrecedenceTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanPrecedenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the VLAN classification precedence information of each port." ::= { swL2VLANMgmt 5 } swL2VlanPrecedenceEntry OBJECT-TYPE SYNTAX SwL2VlanPrecedenceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of VLAN classification precedence information." INDEX { swL2VlanPrecedencePortIndex } ::= { swL2VlanPrecedenceTable 1 } SwL2VlanPrecedenceEntry ::= SEQUENCE { swL2VlanPrecedencePortIndex INTEGER, swL2VlanPrecedenceClassification INTEGER } swL2VlanPrecedencePortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port index." ::= { swL2VlanPrecedenceEntry 1 } swL2VlanPrecedenceClassification OBJECT-TYPE SYNTAX INTEGER{ mac-based(1), subnet-based(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the VLAN classification precedence." ::= { swL2VlanPrecedenceEntry 2 } swL2NniGvrpBpduAddress OBJECT-TYPE SYNTAX INTEGER { dot1d(1), dot1ad(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status." ::= { swL2VLANMgmt 6 } -- ----------------------------------------------------------------------------- -- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- ----------------------------------------------------------------------------- swL2PortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port." ::= { swL2PortMgmt 1 } swL2PortInfoEntry OBJECT-TYPE SYNTAX SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port of the device." INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType } ::= { swL2PortInfoTable 1 } SwL2PortInfoEntry ::= SEQUENCE { swL2PortInfoPortIndex INTEGER, swL2PortInfoMediumType INTEGER, swL2PortInfoUnitID INTEGER, swL2PortInfoType INTEGER, swL2PortInfoLinkStatus INTEGER, swL2PortInfoNwayStatus INTEGER, swL2PortInfoModuleType INTEGER, swL2PortInfoErrorDisabled INTEGER } swL2PortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortInfoEntry 1 } swL2PortInfoMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the medium type of the port number." ::={swL2PortInfoEntry 2} swL2PortInfoUnitID OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the unit in the system." ::= { swL2PortInfoEntry 3 } swL2PortInfoType OBJECT-TYPE SYNTAX INTEGER { portType-100Base-TX(1), portType-100Base-FX(2), portType-100Base-FL(3), portType-1000Base-TX(4), portType-1000Base-SX(5), portType-1000Base-LX(6), portType-1000Base-SX-GBIC(7), portType-1000Base-LX-GBIC(8), portType-1000Base-TX-GBIC(9), portType-1000Base-1394(10), portType-1000Base-TX-GBIC-COMBO(11), portType-1000Base-none-GBIC(12), portType-1000Base-SX-MGBIC(13), portType-1000Base-LX-MGBIC(14), portType-1000Base-TX-MGBIC(15), portType-1000Base-none-MGBIC(16), portType-SIO(17), portType-10G(18), portType-10G-xenpak-1310nm(19), portType-10G-xenpak-850nm(20), portType-10G-xenpak-empty(21), portType-10G-xfp-1310nm(22), portType-10G-xfp-850nm(23), portType-10G-xfp-empty(24), portType-none(25) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connector type of this port." ::= { swL2PortInfoEntry 4 } swL2PortInfoLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port link status." ::= { swL2PortInfoEntry 5 } swL2PortInfoNwayStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port speed and duplex mode." ::= { swL2PortInfoEntry 6 } swL2PortInfoModuleType OBJECT-TYPE SYNTAX INTEGER { none(0), moduleType-COMBO(1), moduleType-1394(2), moduleType-1000T(3), moduleType-MGBIC(4), moduleType-1P-SC-SX(5), moduleType-2P-SC-SX(6), moduleType-1P-SC-LX(7), moduleType-2P-SC-LX(8), moduleType-1P-TX(9), moduleType-2P-TX(10), moduleType-1P-MTRJ-SX(11), moduleType-2P-MTRJ-SX(12), moduleType-1P-MTRJ-LX(13), moduleType-2P-MTRJ-LX(14), moduleType-1P-GBIC(15), moduleType-2P-GBIC(16), moduleType-1P-GBIC-1P-TX(17), moduleType-1P-GBIC-1P-STACK(18), moduleType-2P-STACK(19), moduleType-2P-100FX(20), moduleType-1P-100FX(21), moduleType-2P-100FX-NEW(22), moduleType-1P-100FL(23), moduleType-2P-100FL(24), moduleType-2P-100TX(25), moduleType-BaseModule-24PORT(26) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module type of this port." ::= { swL2PortInfoEntry 7 } swL2PortInfoErrorDisabled OBJECT-TYPE SYNTAX INTEGER { none(0), storm-control(1), stp-lbd(2), unknow(3), ctp-lbd(4), ddm(5), bpdu-protection(6), power-saving(7), port-security(8), ip-mac-port-binding(9), mac-temperature(10), oam-unidirectional-link(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the blocking type of this port." ::= { swL2PortInfoEntry 8 } -- ----------------------------------------------------------------------------- swL2PortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains control information about every port." ::= { swL2PortMgmt 2 } swL2PortCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of control information for each port on the device." INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType} ::= { swL2PortCtrlTable 1 } SwL2PortCtrlEntry ::= SEQUENCE { swL2PortCtrlPortIndex INTEGER, swL2PortCtrlMediumType INTEGER, swL2PortCtrlUnitIndex INTEGER, swL2PortCtrlAdminState INTEGER, swL2PortCtrlNwayState INTEGER, swL2PortCtrlFlowCtrlState INTEGER, swL2PortCtrlLearningState INTEGER, swL2PortCtrlMACNotifyState INTEGER, -- swL2PortCtrlMulticastfilter -- INTEGER swL2PortCtrlMDIXState INTEGER, swL2PortCtrlAutoNegRestart INTEGER, swL2PortCtrlAutoNegCapAdvertisedBits IANAifMauAutoNegCapBits } swL2PortCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCtrlEntry 1 } swL2PortCtrlMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the medium type of the port number." ::={ swL2PortCtrlEntry 2 } swL2PortCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the unit in the device" ::= { swL2PortCtrlEntry 3 } swL2PortCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is enabled or disabled." ::= { swL2PortCtrlEntry 4 } swL2PortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swL2PortCtrlEntry 5 } swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames." ::= { swL2PortCtrlEntry 6 } swL2PortCtrlLearningState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is locked or not." ::= { swL2PortCtrlEntry 7 } swL2PortCtrlMACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets each port's MAC notification state." ::= { swL2PortCtrlEntry 8 } -- swL2PortCtrlMulticastfilter OBJECT-TYPE -- SYNTAX INTEGER { -- other(0), -- forward-all-groups(1), -- forward-unregistered-groups(2), -- filter-unregistered-groups(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object controls the multicast port filtering mode for a specified port. " -- ::= { swL2PortCtrlEntry 9 } swL2PortCtrlMDIXState OBJECT-TYPE SYNTAX INTEGER { auto(1), normal(2), cross(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the MDIX setting of the port." ::= { swL2PortCtrlEntry 10 } swL2PortCtrlAutoNegRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), norestart(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect." REFERENCE "[IEEE802.3], 30.6.1.2.1, acAutoNegRestartAutoConfig." ::= { swL2PortCtrlEntry 11} swL2PortCtrlAutoNegCapAdvertisedBits OBJECT-TYPE SYNTAX IANAifMauAutoNegCapBits MAX-ACCESS read-write STATUS current DESCRIPTION "A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC." REFERENCE "[IEEE802.3], 30.6.1.1.6, aAutoNegAdvertisedTechnologyAbility." ::= { swL2PortCtrlEntry 12 } swL2PortCtrlJumboFrame OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the switch's jumbo frame settings." ::= { swL2PortMgmt 3 } swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes how many bytes the max jumbo frame is." ::= { swL2PortMgmt 4 } swL2PortCableDiagnosisTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains cable diagnostic information about every port." ::= { swL2PortMgmt 5 } swL2PortCableDiagnosisEntry OBJECT-TYPE SYNTAX SwL2PortCableDiagnosisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list with cable diagnostic information for each port of the device." INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex } ::= { swL2PortCableDiagnosisTable 1 } SwL2PortCableDiagnosisEntry ::= SEQUENCE { swL2PortCableDiagnosisPortIndex INTEGER, swL2PortCableDiagnosisPairIndex INTEGER, swL2PortCableDiagnosisCableStatus INTEGER, swL2PortCableDiagnosisPairStatus INTEGER, swL2PortCableDiagnosisPairLength INTEGER, swL2PortCableDiagnosisPairLengthInaccuracy INTEGER } swL2PortCableDiagnosisPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCableDiagnosisEntry 1 } swL2PortCableDiagnosisPairIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the pair index of each port. Pair 1 means pin 3 and 6 of the connector. Pair 2 means pin 1 and 2 of the connector. Pair 3 means pin 7 and 8 of the connector. Pair 4 means pin 4 and 5 of the connector." ::= { swL2PortCableDiagnosisEntry 2 } swL2PortCableDiagnosisCableStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), open(1), short(2), open-short(3), not-support(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the cable status." ::= { swL2PortCableDiagnosisEntry 3 } swL2PortCableDiagnosisPairStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), open(1), short(2), fail(3), not-supported(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the pair." ::= { swL2PortCableDiagnosisEntry 4 } swL2PortCableDiagnosisPairLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approx. length or length to failure of the pair. The unit value is in meters." ::= { swL2PortCableDiagnosisEntry 5 } swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the inaccuracy of a pair length. The unit value is in meters." ::= { swL2PortCableDiagnosisEntry 6 } -- ----------------------------------------------------------------------------- -- swL2PortCounterCtrlTable -- ----------------------------------------------------------------------------- swL2PortCounterCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that is used to clear counter information about every port." ::= { swL2PortMgmt 6 } swL2PortCounterCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries used to clear the counter information for each port of the device." INDEX { swL2PortCounterCtrlPortIndex } ::= { swL2PortCounterCtrlTable 1 } SwL2PortCounterCtrlEntry ::= SEQUENCE { swL2PortCounterCtrlPortIndex INTEGER, swL2PortCounterClearCtrl INTEGER } swL2PortCounterCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCounterCtrlEntry 1 } swL2PortCounterClearCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether to clear the counters for each port of the device or not." ::= { swL2PortCounterCtrlEntry 2 } -- ----------------------------------------------------------------------------- -- swL2PortErrTable -- ----------------------------------------------------------------------------- swL2PortErrTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains error information for each port." ::= { swL2PortMgmt 7 } swL2PortErrEntry OBJECT-TYPE SYNTAX SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information regarding port errors on the device." INDEX { swL2PortErrPortIndex } ::= { swL2PortErrTable 1 } SwL2PortErrEntry ::= SEQUENCE { swL2PortErrPortIndex INTEGER, swL2PortErrPortState INTEGER, swL2PortErrPortConnStatus INTEGER, swL2PortErrPortReason INTEGER } swL2PortErrPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)." ::= { swL2PortErrEntry 1 } swL2PortErrPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if the port state is enabled or disabled." ::= { swL2PortErrEntry 2 } swL2PortErrPortConnStatus OBJECT-TYPE SYNTAX INTEGER { other(1), err-disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the Port Status is err-disabled or not." ::= { swL2PortErrEntry 3 } swL2PortErrPortReason OBJECT-TYPE SYNTAX INTEGER { none(0), stp-lbd(1), storm-control(2), ctp-lbd(4), ddm(5), bpdu-protection(6), power-saving(7), port-security(8), ip-mac-port-binding(9), mac-temperature(10), oam-unidirectional-link(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the reason for the port error." ::= { swL2PortErrEntry 4 } -- ----------------------------------------------------------------------------- -- swL2PortAutoNegInfoTable -- ----------------------------------------------------------------------------- swL2PortAutoNegInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortAutoNegInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port's auto negotiation status." ::= { swL2PortMgmt 8 } swL2PortAutoNegInfoEntry OBJECT-TYPE SYNTAX SwL2PortAutoNegInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port auto negotiation of the device." INDEX { swL2PortAutoNegInfoPortIndex } ::= { swL2PortAutoNegInfoTable 1 } SwL2PortAutoNegInfoEntry ::= SEQUENCE { swL2PortAutoNegInfoPortIndex INTEGER, swL2PortAutoNegInfoAdminStatus INTEGER, swL2PortAutoNegInfoCapabilityBits IANAifMauAutoNegCapBits, swL2PortAutoNegInfoCapAdvertisedBits IANAifMauAutoNegCapBits, swL2PortAutoNegInfoCapReceivedBits IANAifMauAutoNegCapBits } swL2PortAutoNegInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortAutoNegInfoEntry 1 } swL2PortAutoNegInfoAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState." REFERENCE "[IEEE802.3], 30.6.1.1.2, aAutoNegAdminState, and 30.6.1.2.2, acAutoNegAdminControl." ::= { swL2PortAutoNegInfoEntry 2 } swL2PortAutoNegInfoCapabilityBits OBJECT-TYPE SYNTAX IANAifMauAutoNegCapBits MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC." REFERENCE "[IEEE802.3], 30.6.1.1.5, aAutoNegLocalTechnologyAbility." ::= { swL2PortAutoNegInfoEntry 3 } swL2PortAutoNegInfoCapAdvertisedBits OBJECT-TYPE SYNTAX IANAifMauAutoNegCapBits MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC." REFERENCE "[IEEE802.3], 30.6.1.1.6, aAutoNegAdvertisedTechnologyAbility." ::= { swL2PortAutoNegInfoEntry 4 } swL2PortAutoNegInfoCapReceivedBits OBJECT-TYPE SYNTAX IANAifMauAutoNegCapBits MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC." REFERENCE "[IEEE802.3], 30.6.1.1.7, aAutoNegReceivedTechnologyAbility." ::= { swL2PortAutoNegInfoEntry 5 } -- ----------------------------------------------------------------------------- -- swL2PortDropCounterTable -- ----------------------------------------------------------------------------- swL2PortDropCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortDropCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains received error statistic information for each port." ::= { swL2PortMgmt 9 } swL2PortDropCounterEntry OBJECT-TYPE SYNTAX SwL2PortDropCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port received drop counter." INDEX { swL2PortDropCounterPortIndex } ::= { swL2PortDropCounterTable 1 } SwL2PortDropCounterEntry ::= SEQUENCE { swL2PortDropCounterPortIndex INTEGER, swL2PortBufferFullDrops Counter, swL2PortACLDrops Counter, swL2PortMulticastDrops Counter, swL2PortVLANIngressDrops Counter, swL2PortIngressBandwidthControlDrops Counter, swL2PortInvalidIPv6Drops Counter, swL2PortSTPDrops Counter, swL2PortStormAndFDBDiscard Counter, swL2PortMTUDrops Counter, swL2PortInvalidDestinationPort Counter } swL2PortDropCounterPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortDropCounterEntry 1 } swL2PortBufferFullDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded while input buffer full." ::= { swL2PortDropCounterEntry 2 } swL2PortACLDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received packets denied by ACLs." ::= { swL2PortDropCounterEntry 3 } swL2PortMulticastDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received multicast packet that is discarded." ::= { swL2PortDropCounterEntry 4 } swL2PortVLANIngressDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded by VLAN ingress checking." ::= { swL2PortDropCounterEntry 5 } swL2PortIngressBandwidthControlDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded by port ingress bandwidth control." ::= { swL2PortDropCounterEntry 6 } swL2PortInvalidIPv6Drops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded by IPv6 L3" ::= { swL2PortDropCounterEntry 7 } swL2PortSTPDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded when ingress port is not in forwarding state." ::= { swL2PortDropCounterEntry 8 } swL2PortStormAndFDBDiscard OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded by receiving policy (i.e. DST_DISCARD, SRC_DISCARD,RATE_CONTROL, etc.)" ::= { swL2PortDropCounterEntry 9 } swL2PortMTUDrops OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets discarded by frames received, which exceeds Maximum Frame in length and contains a valid or invalid FCS." ::= { swL2PortDropCounterEntry 10 } swL2PortInvalidDestinationPort OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets dropped due to port bitmap of zero condition." ::= { swL2PortDropCounterEntry 11 } -- ----------------------------------------------------------------------------- -- swL2PortJumboFrameCtrlTable -- ----------------------------------------------------------------------------- swL2PortJumboFrameCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortJumboFrameCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information for each port's jumbo frame information." ::= { swL2PortMgmt 10 } swL2PortJumboFrameCtrlEntry OBJECT-TYPE SYNTAX SwL2PortJumboFrameCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port's jumbo frame of the device." INDEX { swL2PortJumboFrameCtrlPortIndex } ::= { swL2PortJumboFrameCtrlTable 1 } SwL2PortJumboFrameCtrlEntry ::= SEQUENCE { swL2PortJumboFrameCtrlPortIndex INTEGER, swL2PortJumboFrameCtrlState INTEGER } swL2PortJumboFrameCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the module's port number." ::= { swL2PortJumboFrameCtrlEntry 1 } swL2PortJumboFrameCtrlState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the jumbo frame state on a specified port." ::= { swL2PortJumboFrameCtrlEntry 2 } -- ----------------------------------------------------------------------------- -- swL2PortSfpInformationTable -- ----------------------------------------------------------------------------- swL2PortSfpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information for each sfp pluged in port." ::= { swL2PortMgmt 11 } swL2PortSfpInfoEntry OBJECT-TYPE SYNTAX SwL2PortSfpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each sfp pluged in port." INDEX { swL2PortSfpInfoPortIndex } ::= { swL2PortSfpInfoTable 1 } SwL2PortSfpInfoEntry ::= SEQUENCE { swL2PortSfpInfoPortIndex INTEGER, swL2PortSfpInfoConnectType DisplayString, swL2PortSfpInfoVendorName DisplayString, swL2PortSfpInfoVendorPN DisplayString, swL2PortSfpInfoVendorSN DisplayString, swL2PortSfpInfoVendorOUI DisplayString, swL2PortSfpInfoVendorRev DisplayString, swL2PortSfpInfoDateCode DisplayString, swL2PortSfpInfoFiberType DisplayString, swL2PortSfpInfoBaudRate INTEGER, swL2PortSfpInfoWavelength INTEGER } swL2PortSfpInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortSfpInfoEntry 1 } swL2PortSfpInfoConnectType OBJECT-TYPE SYNTAX DisplayString(SIZE (1..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ConnectType of sfp informaiton." ::= { swL2PortSfpInfoEntry 2 } swL2PortSfpInfoVendorName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor name of sfp informaiton." ::= { swL2PortSfpInfoEntry 3 } swL2PortSfpInfoVendorPN OBJECT-TYPE SYNTAX DisplayString(SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor PN of sfp informaiton." ::= { swL2PortSfpInfoEntry 4 } swL2PortSfpInfoVendorSN OBJECT-TYPE SYNTAX DisplayString(SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor SN of sfp informaiton." ::= { swL2PortSfpInfoEntry 5 } swL2PortSfpInfoVendorOUI OBJECT-TYPE SYNTAX DisplayString(SIZE (1..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor OUI of sfp information." ::= { swL2PortSfpInfoEntry 6 } swL2PortSfpInfoVendorRev OBJECT-TYPE SYNTAX DisplayString(SIZE (1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor Rev of sfp information." ::= { swL2PortSfpInfoEntry 7 } swL2PortSfpInfoDateCode OBJECT-TYPE SYNTAX DisplayString(SIZE (1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The date code of sfp information." ::= { swL2PortSfpInfoEntry 8 } swL2PortSfpInfoFiberType OBJECT-TYPE SYNTAX DisplayString(SIZE (1..25)) MAX-ACCESS read-only STATUS current DESCRIPTION "The fiber type of sfp information." ::= { swL2PortSfpInfoEntry 9 } swL2PortSfpInfoBaudRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The baud rate of sfp information." ::= { swL2PortSfpInfoEntry 10 } swL2PortSfpInfoWavelength OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The wavelength of sfp information." ::= { swL2PortSfpInfoEntry 11 } -- ----------------------------------------------------------------------------- -- swL2PortLinkTimeTable -- ----------------------------------------------------------------------------- swL2PortLinkTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortLinkTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information for the link time of the port." ::= { swL2PortMgmt 14 } swL2PortLinkTimeEntry OBJECT-TYPE SYNTAX SwL2PortLinkTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in swL2PortLinkTimeTable contains the link time of the port." INDEX { swL2PortLinkTimeIfIndex } ::= { swL2PortLinkTimeTable 1 } SwL2PortLinkTimeEntry ::= SEQUENCE { swL2PortLinkTimeIfIndex INTEGER, swL2PortLinkTimer TimeTicks } swL2PortLinkTimeIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortLinkTimeEntry 1 } swL2PortLinkTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The link timer of the port after the port is link up When the value is 0 means the port is link down." ::= { swL2PortLinkTimeEntry 2 } -- ----------------------------------------------------------------------------- -- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } -- ----------------------------------------------------------------------------- swL2TrunkMaxSupportedEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable)." ::= { swL2TrunkMgmt 1 } swL2TrunkCurrentNumEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current active number of entries in the trunk configuration table." ::= { swL2TrunkMgmt 2 } swL2TrunkCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information about the logical port trunk groups." ::= { swL2TrunkMgmt 3 } swL2TrunkCtrlEntry OBJECT-TYPE SYNTAX SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about each logical port trunk group." INDEX { swL2TrunkIndex } ::= { swL2TrunkCtrlTable 1 } SwL2TrunkCtrlEntry ::= SEQUENCE { swL2TrunkIndex INTEGER, swL2TrunkName DisplayString, swL2TrunkMasterPort INTEGER, swL2TrunkMember PortList, swL2TrunkFloodingPort INTEGER, swL2TrunkType INTEGER, swL2TrunkState RowStatus } swL2TrunkIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module." ::= { swL2TrunkCtrlEntry 1 } swL2TrunkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the logical port trunk group." ::= { swL2TrunkCtrlEntry 2 } swL2TrunkMasterPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)." ::= { swL2TrunkCtrlEntry 3 } swL2TrunkMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group." ::= { swL2TrunkCtrlEntry 4 } swL2TrunkFloodingPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port." ::= { swL2TrunkCtrlEntry 5 } swL2TrunkType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), lacp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. " ::= { swL2TrunkCtrlEntry 6 } swL2TrunkState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2TrunkCtrlEntry 7 } swL2TrunkAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7), l4-source-port(8), l4-destination-port(9), l4-source-dest-port(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data." ::= { swL2TrunkMgmt 4 } swL2TrunkLACPPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link." ::= { swL2TrunkMgmt 5 } swL2TrunkLACPPortEntry OBJECT-TYPE SYNTAX SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link." INDEX { swL2TrunkLACPPortIndex } ::= { swL2TrunkLACPPortTable 1 } SwL2TrunkLACPPortEntry ::= SEQUENCE { swL2TrunkLACPPortIndex INTEGER, swL2TrunkLACPPortState INTEGER } swL2TrunkLACPPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port LACP. " ::= { swL2TrunkLACPPortEntry 1 } swL2TrunkLACPPortState OBJECT-TYPE SYNTAX INTEGER{ active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of a logical port LACP." ::= { swL2TrunkLACPPortEntry 2 } swL2TrunkVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the VLAN trunking feature of the device." ::= { swL2TrunkMgmt 6 } swL2TrunkVLANEntry OBJECT-TYPE SYNTAX SwL2TrunkVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure the VLAN trunking settings for each port." INDEX { swL2TrunkVLANPort } ::= { swL2TrunkVLANTable 1 } SwL2TrunkVLANEntry ::= SEQUENCE { swL2TrunkVLANPort INTEGER, swL2TrunkVLANState INTEGER } swL2TrunkVLANPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port being configured." ::= { swL2TrunkVLANEntry 1 } swL2TrunkVLANState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the logical port LACP." ::= { swL2TrunkVLANEntry 2 } -- ----------------------------------------------------------------------------- -- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- ----------------------------------------------------------------------------- swL2MirrorLogicTargetPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates which switch port will sniff another port. The port number is the sequential (logical) number, which is also applied to the bridge MIB, etc." ::= { swL2MirrorMgmt 1 } swL2MirrorPortSourceIngress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where ingress packets will be sniffed." ::= { swL2MirrorMgmt 2 } swL2MirrorPortSourceEgress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where egress packets will be sniffed." ::= { swL2MirrorMgmt 3 } swL2MirrorPortState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled (2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled (3) - This entry resides in the table." ::= { swL2MirrorMgmt 4 } swL2MirrorGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MirrorGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information about the mirror group configuration." ::= { swL2MirrorMgmt 5 } swL2MirrorGroupEntry OBJECT-TYPE SYNTAX SwL2MirrorGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about each mirror group configuration." INDEX { swL2MirrorGroupID } ::= { swL2MirrorGroupTable 1 } SwL2MirrorGroupEntry ::= SEQUENCE { swL2MirrorGroupID INTEGER, swL2MirrorGroupRowStatus RowStatus, swL2MirrorGroupState INTEGER, swL2MirrorGroupTargetPort INTEGER, swL2MirrorGroupSourceIngress PortList, swL2MirrorGroupSourceEgress PortList } swL2MirrorGroupID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the mirror group. The range of this object is (1..N), the value of N is project dependent." ::= { swL2MirrorGroupEntry 1 } swL2MirrorGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2MirrorGroupEntry 2 } swL2MirrorGroupState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the mirror group state." ::= { swL2MirrorGroupEntry 3 } swL2MirrorGroupTargetPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the mirror group target port." ::= { swL2MirrorGroupEntry 4 } swL2MirrorGroupSourceIngress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the mirror group ingress source ports." ::= { swL2MirrorGroupEntry 5 } swL2MirrorGroupSourceEgress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the mirror group egress source ports." ::= { swL2MirrorGroupEntry 6 } -- ----------------------------------------------------------------------------- -- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2IGMPMgmt 13 } -- ----------------------------------------------------------------------------- swL2IGMPAccessAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPAccessAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the IGMP Access Authentication configurations of the device." ::= { swL2IGMPMgmt 13 } swL2IGMPAccessAuthEntry OBJECT-TYPE SYNTAX SwL2IGMPAccessAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of manageable entities for IGMP Access Authentication. The configuration is done per port." INDEX { swL2IGMPAccessAuthPort } ::= { swL2IGMPAccessAuthTable 1 } SwL2IGMPAccessAuthEntry ::= SEQUENCE { swL2IGMPAccessAuthPort INTEGER, swL2IGMPAccessAuthState INTEGER } swL2IGMPAccessAuthPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured." ::= { swL2IGMPAccessAuthEntry 1 } swL2IGMPAccessAuthState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), auth_only(3), accounting_only(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object denotes the status of IGMP Access Authentication of the port. Note: enabled(1): Both the authentication and accounting functions are enabled, after the client is authenticated, the accounting message will be sent to Radius. disabled(2): Both the authentication and accounting functions are disabled. auth_only(3): Only the authentication function is enabled, after the client is authenticated, accounting message will not be sent to Radius. accounting_only(4): Only the accounting function is enabled, authentication is not needed, if the client joins a group, the accounting message will be sent to Radius. " ::= { swL2IGMPAccessAuthEntry 2 } -- ----------------------------------------------------------------------------- -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 } -- ----------------------------------------------------------------------------- swL2TrafficCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the storm traffic control configuration." ::= { swL2TrafficMgmt 1 } swL2TrafficCtrlEntry OBJECT-TYPE SYNTAX SwL2TrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specific to the storm traffic control configuration." INDEX { swL2TrafficCtrlGroupIndex } ::= { swL2TrafficCtrlTable 1 } SwL2TrafficCtrlEntry ::= SEQUENCE { swL2TrafficCtrlGroupIndex INTEGER, swL2TrafficCtrlUnitIndex INTEGER, swL2TrafficCtrlBMStromthreshold INTEGER, swL2TrafficCtrlBcastStromCtrl INTEGER, swL2TrafficCtrlMcastStromCtrl INTEGER, swL2TrafficCtrlDlfStromCtrl INTEGER } swL2TrafficCtrlGroupIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the logical port trunk. The trunk group number depends on the existence of a unit and module." ::= { swL2TrafficCtrlEntry 1 } swL2TrafficCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the unit in the device" ::= { swL2TrafficCtrlEntry 2 } swL2TrafficCtrlBMStromthreshold OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides how many thousand broadcast/multicast packets per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl objects being enabled) will activate the storm control function. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will restart forwarding that type of packet." ::= { swL2TrafficCtrlEntry 3 } swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the broadcast storm control function is enabled or disabled." ::= { swL2TrafficCtrlEntry 4 } swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the multicast storm control function is enabled or disabled." ::= { swL2TrafficCtrlEntry 5 } swL2TrafficCtrlDlfStromCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the destination lookup fail function is enabled or disabled." ::= { swL2TrafficCtrlEntry 6 } -- ----------------------------------------------------------------------------- -- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- ----------------------------------------------------------------------------- swL2TrafficSegTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies that the port can just forward traffic to the specific port list." ::= { swL2TrafficSegMgmt 1 } swL2TrafficSegEntry OBJECT-TYPE SYNTAX SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information which specifies the port with its traffic forwarding list." INDEX { swL2TrafficSegPort } ::= { swL2TrafficSegTable 1 } SwL2TrafficSegEntry ::= SEQUENCE { swL2TrafficSegPort INTEGER, swL2TrafficSegForwardPorts PortList } swL2TrafficSegPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the logical port." ::= { swL2TrafficSegEntry 1 } swL2TrafficSegForwardPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The port list where a specific port can forward traffic." ::= { swL2TrafficSegEntry 2 } -- ---------------------------------------------------------------------------- -- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } -- ---------------------------------------------------------------------------- swL2MulticastFilterModeVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about the VLAN multicast filter mode." ::={swL2MulticastFilterMode 1} swL2MulticastFilterModeVlanEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter mode information for each VLAN. " INDEX {swL2MulticastFilterVid} ::={swL2MulticastFilterModeVlanTable 1} SwL2MulticastFilterModeVlanEntry ::= SEQUENCE{ swL2MulticastFilterVid INTEGER, swL2MulticastFilterVlanMode INTEGER } swL2MulticastFilterVid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VID for each VLAN." ::={swL2MulticastFilterModeVlanEntry 1} swL2MulticastFilterVlanMode OBJECT-TYPE SYNTAX INTEGER{ forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the multicast filter mode for each VLAN." ::={swL2MulticastFilterModeVlanEntry 2} -- ---------------------------------------------------------------------------- swL2MulticastFilterModePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about the port multicast filter mode." ::={swL2MulticastFilterMode 2} swL2MulticastFilterModePortEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterModePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter mode information for each port. " INDEX {swL2MulticastFilterPortIndex} ::={swL2MulticastFilterModePortTable 1} SwL2MulticastFilterModePortEntry ::= SEQUENCE{ swL2MulticastFilterPortIndex INTEGER, swL2MulticastFilterPortMode INTEGER } swL2MulticastFilterPortIndex OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the port number." ::={swL2MulticastFilterModePortEntry 1} swL2MulticastFilterPortMode OBJECT-TYPE SYNTAX INTEGER{ forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies multicast filter mode for each port." ::={swL2MulticastFilterModePortEntry 2} -- ---------------------------------------------------------------------------- -- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 } -- ---------------------------------------------------------------------------- swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 } swL2LoopDetectAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection status for the system." ::= { swL2LoopDetectCtrl 1 } swL2LoopDetectInterval OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval value, the range is from 1 to 32767 seconds." ::= { swL2LoopDetectCtrl 2 } swL2LoopDetectRecoverTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function." ::= { swL2LoopDetectCtrl 3 } swL2LoopDetectMode OBJECT-TYPE SYNTAX INTEGER { vlan-based(1), port-based(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection mode for the system." ::= { swL2LoopDetectCtrl 4 } swL2LoopDetectTrapMode OBJECT-TYPE SYNTAX INTEGER { none(1), loop_detected(2), loop_cleared(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection trap mode for the system." ::= { swL2LoopDetectCtrl 5 } -- ---------------------------------------------------------------------------- swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 } swL2LoopDetectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." ::= { swL2LoopDetectPortMgmt 1 } swL2LoopDetectPortEntry OBJECT-TYPE SYNTAX SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." INDEX { swL2LoopDetectPortIndex } ::= { swL2LoopDetectPortTable 1 } SwL2LoopDetectPortEntry ::= SEQUENCE { swL2LoopDetectPortIndex INTEGER, swL2LoopDetectPortState INTEGER, swL2LoopDetectPortLoopVLAN DisplayString, swL2LoopDetectPortLoopStatus INTEGER } swL2LoopDetectPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module" ::= { swL2LoopDetectPortEntry 1 } swL2LoopDetectPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection function state on the port." ::= { swL2LoopDetectPortEntry 2 } swL2LoopDetectPortLoopVLAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN list that has detected a loopback." ::= { swL2LoopDetectPortEntry 3 } swL2LoopDetectPortLoopStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), loop(2), error(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port status." ::= { swL2LoopDetectPortEntry 4 } -- ----------------------------------------------------------------------------- -- Layer 2 Trap -- ----------------------------------------------------------------------------- swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 } swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 } swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 } swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- -- swL2NotifyMgmt -- ----------------------------------------------------------------------------- swL2macNotificationSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the level of macNotification detection." ::= { swL2NotifyMgmt 1 } swL2PortSecurityViolationSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the level of PortSecurityViolation detection." ::= { swL2NotifyMgmt 2 } -- ----------------------------------------------------------------------------- -- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- swL2macNotification NOTIFICATION-TYPE OBJECTS { swL2macNotifyInfo } STATUS current DESCRIPTION " This trap indicates the MAC address variations in the address table . " ::= { swL2NotifFirmware 1 } swL2PortSecurityViolationTrap NOTIFICATION-TYPE OBJECTS { swPortSecPortIndex, swL2PortSecurityViolationMac } STATUS current DESCRIPTION "When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out." ::= { swL2NotifFirmware 2 } swL2PortLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when a Port loop occurs." ::={swL2NotifFirmware 3} swL2PortLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when a Port loop restarts after the interval time." ::={swL2NotifFirmware 4} swL2VlanLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID loop occurs." ::={swL2NotifFirmware 5} swL2VlanLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID loop restarts after the interval time." ::={swL2NotifFirmware 6} -- ----------------------------------------------------------------------------- -- notificationBidings -- ----------------------------------------------------------------------------- swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 } swL2macNotifyInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the information for the device MAC address changes. And the detailed information include: Operation Code + MAC address + Box ID + Port Number + Zero... Operation Code: 1, 2 1 means learned a new MAC address 2 means deleted a old MAC address. Box ID: The switch box ID, for standalone device, it always 1. Port Number: The port number learned or deleted for the box. Zero: Used to separate each message(Operate Code + MAC address + Box ID + Port Number)." ::= { swl2NotificationBidings 1 } swL2PortSecurityViolationMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the MAC address that violated the port security configuration." ::= { swl2NotificationBidings 2 } swL2VlanLoopDetectVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VID that detected a loopback." ::= { swl2NotificationBidings 3 } END