DGS-6600-VPLS-GENERIC-MIB DEFINITIONS ::= BEGIN IMPORTS NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, transmission FROM SNMPv2-SMI -- RFC2578 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 TruthValue, RowStatus, StorageType FROM SNMPv2-TC -- RFC2579 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC3411 pwIndex FROM PW-STD-MIB VPNIdOrZero FROM VPN-TC-STD-MIB -- RFC4265 -- Steven add for DVPLS-GENERIC-MIB in the DLINK private OID tree. 2013/1/9 dgs6600-mpls FROM DGS-6600-ID-MIB ; dgs6600VplsGenericMIB MODULE-IDENTITY LAST-UPDATED "201208261200Z" -- 26 Aug 2012 12:00:00 GMT ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN) Working Group" CONTACT-INFO " Thomas D. Nadeau Email: tnadeau@juniper.net The L2VPN Working Group (email distribution l2vpn@ietf.org, http://www.ietf.org/html.charters/l2vpn-charter.html) " DESCRIPTION "Copyright (C) The IETF Trust (2012). The initial version of this MIB module was published in RFC XXXX. -- RFC Editor: Please replace XXXX with RFC number & remove -- this note. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains generic managed object definitions for Virtual Private LAN Services as define in [RFC4762] and [RFC4761] This MIB module enables the use of any underlying Pseudowire network." -- Revision history. REVISION "201209291200Z" -- 29 September 2012 12:00:00 GMT DESCRIPTION "Changes from previous version: 1) Moved LDP Specific information to VPLS-LDP-MIB 2) Created the vplsStatusTable to store status information. 3) " REVISION "200606041200Z" -- 4 June 2006 12:00:00 GMT DESCRIPTION "Initial version published as part of RFC YYYY." -- RFC Editor: please replace YYYY with IANA assigned value, and -- delete this note. ::= { dgs6600-mpls 1 } -- RFC Editor: please replace XXXX with IANA assigned value, and -- delete this note. -- Vpls BGP Auto-Discovery specific Textual Convention VplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Syntax for a route distinguisher. For a complete definition of a route distinguisher, see [RFC4364]. For more details on use of a route distinguisher for a VPLS service, see [RFC4761]" REFERENCE "[RFC4364]" SYNTAX OCTET STRING(SIZE (0..256)) VplsBgpRouteTarget ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Syntax for a route target. For a complete definition of a route target, see [RFC4364]." REFERENCE "[RFC4364]" SYNTAX OCTET STRING(SIZE (0..256)) VplsBgpRouteTargetType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]." REFERENCE "[RFC4364]" SYNTAX INTEGER { import(1), export(2), both(3) } -- Top-level components of this MIB. -- Notifications vplsNotifications OBJECT IDENTIFIER ::= { dgs6600VplsGenericMIB 0 } -- Tables, Scalars vplsObjects OBJECT IDENTIFIER ::= { dgs6600VplsGenericMIB 1 } -- Conformance vplsConformance OBJECT IDENTIFIER ::= { dgs6600VplsGenericMIB 2 } -- PW Virtual Connection Table vplsConfigIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for vplsConfigIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned entries are available. To obtain the value of vplsConfigIndex for a new entry in the vplsConfigTable, the manager issues a management protocol retrieval operation to obtain the current value of vplsConfigIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { vplsObjects 1 } vplsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VplsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). " ::= { vplsObjects 2 } vplsConfigEntry OBJECT-TYPE SYNTAX VplsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. A row is created by the operator or by the agent if a VPLS service is created by a non-SNMP application or due to the Auto-Discovery process. None of the read-create objects values can be changed when vplsConfigRowStatus is in the active(1) state. Changes are allowed when the vplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator needs to change one of the values for an active row the vplsConfigRowStatus should be first changed to notInService(2), the objects may then be changed, and finally the vplsConfigRowStatus should be changed to active(1) in order to re-initiate the signaling process with the new values in effect. " INDEX { vplsConfigIndex } ::= { vplsConfigTable 1 } VplsConfigEntry ::= SEQUENCE { vplsConfigIndex Unsigned32, vplsConfigName SnmpAdminString, vplsConfigDescr SnmpAdminString, vplsConfigAdminStatus INTEGER, vplsConfigMacLearning TruthValue, vplsConfigDiscardUnknownDest TruthValue, vplsConfigMacAging TruthValue, vplsConfigFwdFullHighWatermark Unsigned32, vplsConfigFwdFullLowWatermark Unsigned32, vplsConfigRowStatus RowStatus, vplsConfigMtu Unsigned32, vplsConfigVpnId VPNIdOrZero, vplsConfigStorageType StorageType } vplsConfigIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the conceptual row identifying a VPLS service." ::= { vplsConfigEntry 1 } vplsConfigName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string." DEFVAL { "" } ::= { vplsConfigEntry 2 } vplsConfigDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string." DEFVAL { "" } ::= { vplsConfigEntry 3 } vplsConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) -- in some test mode } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of the VPLS service. If the administrative status of the VPLS service is changed to enabled then this service is able to utilize pseudowires to perform the tasks of a VPLS service. The testing(3) state indicates that no operational packets can be passed. " DEFVAL { down } ::= { vplsConfigEntry 4 } vplsConfigMacLearning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if MAC Learning is enabled in this service. If this object is true then MAC Learning is enabled. If false, then MAC Learning is disabled." DEFVAL { true } ::= { vplsConfigEntry 6 } vplsConfigDiscardUnknownDest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed." DEFVAL { false } ::= { vplsConfigEntry 7 } vplsConfigMacAging OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled" DEFVAL { true } ::= { vplsConfigEntry 8 } vplsConfigFwdFullHighWatermark OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percentage" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent." DEFVAL { 95 } ::= { vplsConfigEntry 10 } vplsConfigFwdFullLowWatermark OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percentage" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent." DEFVAL { 90 } ::= { vplsConfigEntry 11 } vplsConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state." ::= { vplsConfigEntry 12 } vplsConfigMtu OBJECT-TYPE SYNTAX Unsigned32 (64..9192) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object specifies the MTU of this vpls instance. This can be used to limit the MTU to a value lower than the MTU supported by the associated Pseudowires" DEFVAL { 1518 } ::= { vplsConfigEntry 13 } vplsConfigVpnId OBJECT-TYPE SYNTAX VPNIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service." ::= { vplsConfigEntry 14 } vplsConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this row." DEFVAL { nonVolatile } ::= { vplsConfigEntry 15 } -- VPLS Status table vplsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VplsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information for monitoring Virtual Private Lan Services (VPLS). " ::= { vplsObjects 3 } vplsStatusEntry OBJECT-TYPE SYNTAX VplsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. A row in this table is automatically created by the agent when a VPLS service is configured. " INDEX { vplsConfigIndex } ::= { vplsStatusTable 1 } VplsStatusEntry ::= SEQUENCE { vplsStatusOperStatus INTEGER, vplsStatusPeerCount Counter32 } vplsStatusOperStatus OBJECT-TYPE SYNTAX INTEGER { other(0), up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this VPLS Service." ::= { vplsStatusEntry 1 } vplsStatusPeerCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This objects specifies the number of peers (pseudowires) present in this VPLS instance." ::= { vplsStatusEntry 2 } -- VPLS PW Binding Table vplsPwBindTable OBJECT-TYPE SYNTAX SEQUENCE OF VplsPwBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseudowire association. Pseudowires are defined in the pwTable" ::= { vplsObjects 4 } vplsPwBindEntry OBJECT-TYPE SYNTAX VplsPwBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in this table. However both indexes are required to define the one to many association of service to pseudowire." INDEX { vplsConfigIndex, pwIndex } ::= { vplsPwBindTable 1 } VplsPwBindEntry ::= SEQUENCE { vplsPwBindConfigType INTEGER, vplsPwBindType INTEGER, vplsPwBindRowStatus RowStatus, vplsPwBindStorageType StorageType } vplsPwBindConfigType OBJECT-TYPE SYNTAX INTEGER { manual (1), autodiscovery (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object indicates whether the Pseudo Wire binding was created manually or via Auto-Discovery. The value of this object must be specifed when the row is created and cannot be changed while the row status is active(1)" ::= { vplsPwBindEntry 1 } vplsPwBindType OBJECT-TYPE SYNTAX INTEGER { mesh (1), spoke (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object indicates whether the pseudowire binding is of type mesh or spoke. The value of this object must be specified when the row is created and cannot be changed while the row status is active(1)" ::= { vplsPwBindEntry 2 } vplsPwBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state" ::= { vplsPwBindEntry 3 } vplsPwBindStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the storage type for this row." DEFVAL { volatile } ::= { vplsPwBindEntry 4 } -- vplsBgpADConfigTable vplsBgpADConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VplsBgpADConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring BGP Auto-Discovery parameters for a given VPLS service. " ::= { vplsObjects 5 } vplsBgpADConfigEntry OBJECT-TYPE SYNTAX VplsBgpADConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table indicates that BGP based Auto- Discovery is in use for this instance of VPLS. A row in this table is indexed by vplsConfigIndex, which uniquely identifies a single VPLS. None of the read-create objects can be changed when vplsBGPADConfigRowStatus is in active(1) state. Changes are allowed when the vplsBGPADConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator needs to change one of the values for an active row the vplsConfigRowStatus should be first changed to notInService(2), the objects may then be changed, and finally the vplsConfigRowStatus should be changed to active(1) in order to re-initiate the signaling process with the new values in effect. " INDEX { vplsConfigIndex } ::= { vplsBgpADConfigTable 1 } VplsBgpADConfigEntry ::= SEQUENCE { vplsBgpADConfigRouteDistinguisher VplsBgpRouteDistinguisher, vplsBgpADConfigPrefix Unsigned32, vplsBgpADConfigVplsId VplsBgpRouteDistinguisher, vplsBgpADConfigRowStatus RowStatus } vplsBgpADConfigRouteDistinguisher OBJECT-TYPE SYNTAX VplsBgpRouteDistinguisher MAX-ACCESS read-create STATUS current DESCRIPTION " The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a VPLS service, see [RFC4761]. When not configured, the value is derived from the lower 6 bytes of vplsBgpADConfigVplsId. " ::= { vplsBgpADConfigEntry 1 } vplsBgpADConfigPrefix OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION " In case of auto-discovery the default prefix advertised is the IP address of the loopback. In case the user wants to override the loopback address, vplsBgpADConfigPrefix should be set. When this value is non-zero this value is used along with vplsBgpADConfigRouteDistinguisher in the NLRI, see [RFC 6074] " DEFVAL { 0 } ::= { vplsBgpADConfigEntry 2 } vplsBgpADConfigVplsId OBJECT-TYPE SYNTAX VplsBgpRouteDistinguisher MAX-ACCESS read-create STATUS current DESCRIPTION " VplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community. " ::= { vplsBgpADConfigEntry 3 } vplsBgpADConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. " ::= { vplsBgpADConfigEntry 4 } -- vplsBgpRteTargetTable -- vplsBgpRteTargetTable OBJECT-TYPE -- SYNTAX SEQUENCE OF VplsBgpRteTargetEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " This table specifies the list of Route Targets -- imported or exported by BGP during auto-discovery of VPLS. -- " -- ::= { vplsObjects 6 } -- -- vplsBgpRteTargetEntry OBJECT-TYPE -- SYNTAX VplsBgpRteTargetEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "An entry in this table specifies the value of the -- Route Target being used by BGP. Depending on the value -- of vplsBgpRteTargetType a Route Target might be exported or -- imported or both. Every VPLS which -- uses auto-discovery for finding peer nodes can import and -- export multiple Route Targets. This representation allows -- support for hierarchical VPLS. -- " -- INDEX { vplsConfigIndex, vplsBgpRteTargetIndex } -- ::= { vpsBgpRteTargetTable 1 } -- -- VplsBgpRteTargetEntry ::= -- SEQUENCE { -- vplsBgpRteTargetIndex Unsigned32, -- vplsBgpRteTargetRTType VplsBgpRouteTargetType, -- vplsBgpRteTargetRT VplsBgpRouteTarget, -- vplsBgpRteTargetRTRowStatus RowStatus -- } -- -- vplsBgpRteTargetIndex OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This index along with vplsConfigIndex, identifies one -- entry in the vplsBgpRteTargetTable. By keeping -- vplsConfigIndex constant and using new value of -- vplsBgpRteTargetIndex users can configure multiple Route -- Targets for the same VPLS. -- " -- ::= { vplsBgpADConfigEntry 1 } -- -- vplsBgpRteTargetRTType OBJECT-TYPE -- SYNTAX VplsBgpRouteTargetType -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " Used to define the type of a route target usage. -- Route targets can be specified to be imported, -- exported, or both. For a complete definition of a -- route target, see [RFC4364]. -- " -- ::= { vplsBgpADConfigEntry 2 } -- -- vplsBgpRteTargetRT OBJECT-TYPE -- SYNTAX VplsBgpRouteTarget -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " The route target associated with the VPLS service. -- For more details on use of route targets -- for a VPLS service, see [RFC4761] -- " -- ::= { vplsBgpADConfigEntry 3 } -- -- vplsBgpRteTargetRTRowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This variable is used to create, modify, and/or -- delete a row in this table. When a row in this -- table is in active(1) state, no objects in that row -- can be modified -- " -- ::= { vplsBgpADConfigEntry 4 } vplsStatusNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is set to true(1), then it enables the emission of vplsStatusChanged notification; otherwise this notification is not emitted." REFERENCE "See also [RFC3413] for explanation that notifications are under the ultimate control of the MIB module in this document." DEFVAL { false } ::= { vplsObjects 7 } vplsNotificationMaxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur." DEFVAL { 0 } ::= { vplsObjects 8 } -- VPLS Service Notifications vplsStatusChanged NOTIFICATION-TYPE OBJECTS { vplsConfigVpnId, vplsConfigAdminStatus, vplsStatusOperStatus } STATUS current DESCRIPTION "The vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service." ::= { vplsNotifications 1 } vplsFwdFullAlarmRaised NOTIFICATION-TYPE OBJECTS { vplsConfigVpnId, vplsConfigFwdFullHighWatermark, vplsConfigFwdFullLowWatermark } STATUS current DESCRIPTION "The vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWatermark." ::= { vplsNotifications 2 } vplsFwdFullAlarmCleared NOTIFICATION-TYPE OBJECTS { vplsConfigVpnId, vplsConfigFwdFullHighWatermark, vplsConfigFwdFullLowWatermark } STATUS current DESCRIPTION "The vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWatermark." ::= { vplsNotifications 3 } -- Conformance Section vplsCompliances OBJECT IDENTIFIER ::= { vplsConformance 1 } -- Compliance requirement for fully compliant implementations vplsModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that provide full support for VPLS-GENERIC-MIB. Such devices can then be monitored and configured using this MIB module." MODULE -- this module MANDATORY-GROUPS { vplsGroup, vplsPwBindGroup, vplsNotificationGroup } ::= { vplsCompliances 1 } -- Compliance requirement for read-only implementations. vplsModuleReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that only provide read-only support for VPLS-GENERIC-MIB. Such devices can then be monitored but cannot be configured using this MIB modules." MODULE -- this module MANDATORY-GROUPS { vplsGroup, vplsPwBindGroup, vplsNotificationGroup } OBJECT vplsConfigName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigMacLearning MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigDiscardUnknownDest MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigMacAging MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigFwdFullHighWatermark MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigFwdFullLowWatermark MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsConfigMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- Steven remove it for Compiler error. 2013/1/9 -- OBJECT vplsConfigServiceType -- MIN-ACCESS read-only -- DESCRIPTION -- "Write access is not required." OBJECT vplsPwBindConfigType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsPwBindType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vplsPwBindRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { vplsCompliances 2 } -- Units of conformance. vplsGroups OBJECT IDENTIFIER ::= { vplsConformance 2 } vplsGroup OBJECT-GROUP OBJECTS { vplsConfigName, vplsConfigDescr, vplsConfigAdminStatus, vplsConfigMacLearning, vplsConfigDiscardUnknownDest, vplsConfigMacAging, vplsConfigVpnId, vplsConfigFwdFullHighWatermark, vplsConfigFwdFullLowWatermark, vplsConfigRowStatus, vplsConfigIndexNext, vplsConfigMtu, vplsConfigStorageType, vplsStatusOperStatus, vplsStatusPeerCount, vplsStatusNotifEnable, vplsNotificationMaxRate } STATUS current DESCRIPTION "The group of objects supporting management of L2VPN VPLS services" ::= { vplsGroups 1 } vplsPwBindGroup OBJECT-GROUP OBJECTS { vplsPwBindConfigType, vplsPwBindType, vplsPwBindRowStatus, vplsPwBindStorageType } STATUS current DESCRIPTION "The group of objects supporting management of Pseudo Wire (PW) Binding to VPLS." ::= { vplsGroups 2 } vplsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vplsStatusChanged, vplsFwdFullAlarmRaised, vplsFwdFullAlarmCleared } STATUS current DESCRIPTION "The group of notifications supporting the Notifications generated for VPLS Services" ::= { vplsGroups 3 } END