-- ***************************************************************************** -- DGS-3420-26SC-L3MGMT-MIB -- ***************************************************************************** -- MODIFICTION HISTORY: -- ***************************************************************************** -- Version 0.13 -- 2012/09/11 Dinah Zhou -- [New Object] -- 1. Add swL3Route6RedistriTable to support -- IPv6 route redistribution. -- -- Version 0.12, 2012/08/14, Kaiser Yang -- [New Object] -- 1.Add VRRP related objects. -- -- Version 0.11, 2012/04/19, King Cao -- [New Object] -- 1.Add swL3IpCtrlDhcpv6ClientPDxxx objects to swL3IpCtrlTable and swL3Ipv6DHCPv6CPDAddrCtrlTable -- to support IPv6 record for DHCPv6 Client PD function. -- Request by King for DGS-3420. -- -- Version 0.10 -- 2010/12/31 Jok Long -- Description: -- [New Object] -- 1. Remove MD5. -- 2. Remove OSPF. -- 3. Remove VRRP. -- 4. Remove ip directed-broadcast. -- 5. Remove BGP. -- 6. Remove DVMRP. -- 7. Remove IP Multicast Static Route. -- -- Version 0.09 -- 2010/12/2 Kevin Wang -- Description: -- [New Object] -- 1.Add RIP timers related objects. -- -- Version 0.08 -- 2010/11/24 Kevin Wang -- Description: -- [New Object] -- 1.Modify objects: swL3ospfIfType, swL3ospfIfTransitDelay, swL3ospfIfRetransInterval, -- swL3ospfIfPollInterval,swL3ospfIfMulticastForwarding, swL3ospfIfDemand, -- swL3ospfVirtIfTransitDelay swL3ospfVirtIfRetransInterval to -- read-only. -- -- Version 0.07 -- 2010/11/10 Wesley Wang -- Description: -- [New Object] -- 1.Add swL3IpMcastMgmt to support Static Multicast Route. -- -- Version 0.06 -- 2010/11/01 Bruce Ge -- Description: -- [New Object] -- 1. Add object swL3DevCtrlDVMRPState. -- 2. Add swL3dvmrpInterfaceTable table. -- Version 0.05 -- 2010/9/8 Sammy Xiao -- Description: -- [New Object] -- 1. Add swL3IpStaticRouteTunnelTable. -- -- Version 0.04 -- 2010/8/18 Kevin Wang -- Description: -- [New Object] -- 1. Add swL3RoutePreferenceEBGP and swL3RoutePreferenceIBGP objects. -- 2. Add object swL3RouteRedistriRouteMapName in swL3RouteRedistriTable. -- -- Version 0.03 -- 2010/7/14 Easion Tang -- Description: -- [New Object] -- 1. Add swL3IpCtrlDhcpv6ClientState and swL3IpCtrlIpDirectedBroadcastState objects. -- -- Version 0.02 -- 2010/6/25 Kevin Wang -- Description: -- [New Object] -- 1. Add MD5, OSPF, VRRP, RIP objects. -- -- Version 0.01 -- -- Description: -- -- ***************************************************************************** DGS-3420-26SC-L3MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress, NOTIFICATION-TYPE, Integer32,Unsigned32 FROM SNMPv2-SMI PhysAddress,TruthValue,DisplayString,RowStatus,MacAddress,TimeStamp FROM SNMPv2-TC Ipv6Address FROM IPV6-TC dlink-Dgs3420Proj-Dgs3420-26SC FROM SWDGS3420PRIMGMT-MIB InterfaceIndex FROM IF-MIB; swL3MgmtMIB MODULE-IDENTITY LAST-UPDATED "1208140000Z" ORGANIZATION " " CONTACT-INFO " " DESCRIPTION "The Structure of Layer 3 Network Management Information for the proprietary enterprise." ::= { dlink-Dgs3420Proj-Dgs3420-26SC 3 } NodeAddress ::= OCTET STRING (SIZE(6)) NetAddress ::= OCTET STRING (SIZE(4)) swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 } swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 } swL3IpMcastMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 6 } swL3OspfLsdbMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 13 } swL3VrrpOperMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 14 } -- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 } swL3RIPTimerMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 17 } -- **************************************************************************** -- Textual Conventions -- **************************************************************************** VrId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number which, along with an interface index (ifIndex), serves to uniquely identify a virtual router on a given VRRP router. A set of one or more associated addresses is assigned to a VRID." SYNTAX Integer32 (1..255) -- ******************************************************************** -- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } -- ******************************************************************** swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 } swL3DevCtrlRIPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the Routing Information Protocol (RIP) version 2 function is enabled or disabled." ::= { swL3DevCtrl 1 } -- swL3DevCtrlPIMDMState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the PIM-DM protocol is enabled or disabled." -- ::= { swL3DevCtrl 4 } swL3DevCtrlVRRPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates VRRP protocol is enabled or disabled." ::= { swL3DevCtrl 5 } swL3DevCtrlVrrpPingState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates VRRP protocol Ping is enabled or disabled." ::= { swL3DevCtrl 6 } -- ******************************************************************** -- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } -- ******************************************************************** -- swL3IpCtrlIpv4State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv4 function state of the device." -- ::= { swL3IpCtrlMgmt 1 } -- swL3IpCtrlIpv6State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv6 function state of the device." -- ::= { swL3IpCtrlMgmt 2 } swL3IpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain IP interface information." ::= { swL3IpCtrlMgmt 3 } swL3IpCtrlEntry OBJECT-TYPE SYNTAX SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IP interface." INDEX { swL3IpCtrlInterfaceName } ::= { swL3IpCtrlTable 1 } SwL3IpCtrlEntry ::= SEQUENCE { swL3IpCtrlInterfaceName DisplayString, swL3IpCtrlIfIndex INTEGER, swL3IpCtrlIpAddr IpAddress, swL3IpCtrlIpSubnetMask IpAddress, swL3IpCtrlVlanName DisplayString, swL3IpCtrlProxyArp INTEGER, swL3IpCtrlSecondary TruthValue, swL3IpCtrlMode INTEGER, swL3IpCtrlAdminState INTEGER, swL3IpCtrlIpv4AdminState INTEGER, -- swL3IpCtrlIpv4OperState -- INTEGER, swL3IpCtrlIpv6AdminState INTEGER, -- swL3IpCtrlIpv6OperState -- INTEGER, swL3IpCtrlIpv6LinkLocalAddress Ipv6Address, swL3IpCtrlIpv6LinkLocalPrefixLen INTEGER, swL3IpCtrlState RowStatus, swL3IpCtrlIpv6LinkLocalAutoState INTEGER, swL3IpCtrlLocalProxyArp INTEGER, swL3IpCtrlIpMtu INTEGER, swL3IpCtrlDhcpv6ClientState INTEGER, swL3IpCtrlIpDirectedBroadcastState INTEGER, swL3IpCtrlIpDhcpOption12State INTEGER, swL3IpCtrlIpDhcpOption12HostName DisplayString, swL3IpCtrlDhcpv6ClientPDState INTEGER, swL3IpCtrlDhcpv6ClientPDPrefixName DisplayString, swL3IpCtrlDhcpv6ClientPDPrefix Ipv6Address, swL3IpCtrlDhcpv6ClientPDPrefixLen INTEGER } swL3IpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3IpCtrlEntry 1 } swL3IpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the IP interface number in the swL3IpCtrlTable." ::= { swL3IpCtrlEntry 2 } swL3IpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the interface. This object only can take the value of the unicast IP address." ::= { swL3IpCtrlEntry 3 } swL3IpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP net mask for this interface." ::= { swL3IpCtrlEntry 4 } swL3IpCtrlVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table." ::= { swL3IpCtrlEntry 5 } swL3IpCtrlProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates enable/disable of the proxy ARP function for IPv4." ::= { swL3IpCtrlEntry 6 } swL3IpCtrlSecondary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP." ::= { swL3IpCtrlEntry 7 } swL3IpCtrlMode OBJECT-TYPE SYNTAX INTEGER { other(1), bootp(3), dhcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server." ::= { swL3IpCtrlEntry 8 } swL3IpCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IP interface." ::= { swL3IpCtrlEntry 9 } swL3IpCtrlIpv4AdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled." ::= { swL3IpCtrlEntry 10 } -- swL3IpCtrlIpv4OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv4 operational state of the IP interface. -- If the swL3IpCtrlIpv4State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 11 } swL3IpCtrlIpv6AdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled." ::= { swL3IpCtrlEntry 12 } -- swL3IpCtrlIpv6OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv6 operational state of the IP interface. -- If the swL3IpCtrlIpv6State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 13 } swL3IpCtrlIpv6LinkLocalAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 link local address for this interface." ::= { swL3IpCtrlEntry 14 } swL3IpCtrlIpv6LinkLocalPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix length for this IPv6 link local address." ::= { swL3IpCtrlEntry 15 } swL3IpCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3IpCtrlEntry 16 } swL3IpCtrlIpv6LinkLocalAutoState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IPv6 link local auto." ::= { swL3IpCtrlEntry 17 } swL3IpCtrlLocalProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates enable/disable of the local proxy ARP function for IPv4." ::= { swL3IpCtrlEntry 18 } swL3IpCtrlIpMtu OBJECT-TYPE SYNTAX INTEGER UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The MTU is the largest size of the IP datagram which may be transferred using a specific data link connection. The MTU value is a design parameter of a LAN and is a mutually agreed value (i.e. both ends of a link agree to use the same specific value) for most WAN links. The MTU range is based on the chip of the current device. The suggested minimum value is 1500 bytes. The suggested maximum value is the size of the jumbo frame minus 36. The suggested default setting is 1500 bytes." DEFVAL { 1500 } ::={swL3IpCtrlEntry 19} swL3IpCtrlDhcpv6ClientState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the Dhcpv6 Client." ::= { swL3IpCtrlEntry 20 } swL3IpCtrlIpDirectedBroadcastState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IP Directed Broadcast." ::= { swL3IpCtrlEntry 21 } swL3IpCtrlIpDhcpOption12State OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message." ::= { swL3IpCtrlEntry 22 } swL3IpCtrlIpDhcpOption12HostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12." ::= { swL3IpCtrlEntry 23 } swL3IpCtrlDhcpv6ClientPDState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the Dhcpv6 Client PD." ::= { swL3IpCtrlEntry 24 } swL3IpCtrlDhcpv6ClientPDPrefixName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write." ::= { swL3IpCtrlEntry 25 } swL3IpCtrlDhcpv6ClientPDPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix obtained form delegation router." ::= { swL3IpCtrlEntry 26 } swL3IpCtrlDhcpv6ClientPDPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix length for the prefix obtained from delegation router." ::= { swL3IpCtrlEntry 27 } swL3Ipv6CtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IPv6 information of an IP interface." ::= { swL3IpCtrlMgmt 4 } swL3Ipv6CtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPv6 information about a specific IP interface." INDEX { swL3Ipv6CtrlInterfaceName } ::= { swL3Ipv6CtrlTable 1 } SwL3Ipv6CtrlEntry ::= SEQUENCE { swL3Ipv6CtrlInterfaceName DisplayString, swL3Ipv6CtrlMaxReassmblySize INTEGER, swL3Ipv6CtrlNsRetransTimer Unsigned32, -- swL3Ipv6CtrlRsState -- INTEGER, swL3Ipv6CtrlRaState INTEGER, swL3Ipv6CtrlRaMinRtrAdvInterval INTEGER, swL3Ipv6CtrlRaMaxRtrAdvInterval INTEGER, swL3Ipv6CtrlRaLifeTime INTEGER, swL3Ipv6CtrlRaReachableTime INTEGER, swL3Ipv6CtrlRaRetransTime Unsigned32, swL3Ipv6CtrlRaHopLimit INTEGER, swL3Ipv6CtrlRaManagedFlag INTEGER, swL3Ipv6CtrlRaOtherConfigFlag INTEGER } swL3Ipv6CtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3Ipv6CtrlEntry 1 } swL3Ipv6CtrlMaxReassmblySize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Reassembly Size of the IP interface." ::= { swL3Ipv6CtrlEntry 2 } swL3Ipv6CtrlNsRetransTimer OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor solicitation's retransmit timer. The unit is set in milliseconds." ::= { swL3Ipv6CtrlEntry 3 } -- swL3Ipv6CtrlRsState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Router solicited state." -- ::= { swL3Ipv6CtrlEntry 4 } swL3Ipv6CtrlRaState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor solicited state." ::= { swL3Ipv6CtrlEntry 5 } swL3Ipv6CtrlRaMinRtrAdvInterval OBJECT-TYPE SYNTAX INTEGER (3..1350) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvInterval" ::= { swL3Ipv6CtrlEntry 6 } swL3Ipv6CtrlRaMaxRtrAdvInterval OBJECT-TYPE SYNTAX INTEGER (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds." DEFVAL {600} ::= { swL3Ipv6CtrlEntry 7 } swL3Ipv6CtrlRaLifeTime OBJECT-TYPE SYNTAX INTEGER (0..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the lifetime of the router as the default router." ::= { swL3Ipv6CtrlEntry 8 } swL3Ipv6CtrlRaReachableTime OBJECT-TYPE SYNTAX INTEGER (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation." ::= { swL3Ipv6CtrlEntry 9 } swL3Ipv6CtrlRaRetransTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond." ::= { swL3Ipv6CtrlEntry 10 } swL3Ipv6CtrlRaHopLimit OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message." ::= { swL3Ipv6CtrlEntry 11 } swL3Ipv6CtrlRaManagedFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration." ::= { swL3Ipv6CtrlEntry 12 } swL3Ipv6CtrlRaOtherConfigFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information." ::= { swL3Ipv6CtrlEntry 13 } swL3Ipv6AddressCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IPv6 address information for each IP interface." ::= { swL3IpCtrlMgmt 5 } swL3Ipv6AddressCtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IPv6 address." INDEX { swL3Ipv6AddressCtrlInterfaceName, swL3Ipv6Address, swL3Ipv6AddressCtrlPrefixLen } ::= { swL3Ipv6AddressCtrlTable 1 } SwL3Ipv6AddressCtrlEntry ::= SEQUENCE { swL3Ipv6AddressCtrlInterfaceName DisplayString, swL3Ipv6Address Ipv6Address, swL3Ipv6AddressCtrlPrefixLen INTEGER, swL3Ipv6AddressCtrlPreferredLifeTime Unsigned32, swL3Ipv6AddressCtrlValidLifeTime Unsigned32, swL3Ipv6AddressCtrlOnLinkFlag INTEGER, swL3Ipv6AddressCtrlAutonomousFlag INTEGER, swL3Ipv6AddressCtrlState RowStatus, swL3Ipv6AddressCtrlAddressType INTEGER } swL3Ipv6AddressCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface. " ::= { swL3Ipv6AddressCtrlEntry 1 } swL3Ipv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 2 } swL3Ipv6AddressCtrlPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the prefix length of this IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 3 } swL3Ipv6AddressCtrlPreferredLifeTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff." ::= { swL3Ipv6AddressCtrlEntry 4 } swL3Ipv6AddressCtrlValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff." ::= { swL3Ipv6AddressCtrlEntry 5 } swL3Ipv6AddressCtrlOnLinkFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the address implied by the specified prefix is available on the link where the RA message is received." ::= { swL3Ipv6AddressCtrlEntry 6 } swL3Ipv6AddressCtrlAutonomousFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, the specified prefix will be used to create an autonomous address configuration." ::= { swL3Ipv6AddressCtrlEntry 7 } swL3Ipv6AddressCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3Ipv6AddressCtrlEntry 8 } swL3Ipv6AddressCtrlAddressType OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcpv6(2), stateless(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement." ::= { swL3Ipv6AddressCtrlEntry 9 } swL3Ipv6DHCPv6CPDAddrCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6DHCPv6CPDAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain the information of the IPv6 address which based on DHCPv6 client PD." ::= { swL3IpCtrlMgmt 6 } swL3Ipv6DHCPv6CPDAddrCtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6DHCPv6CPDAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific DHCPv6 Client PD IPv6 address." INDEX { swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName, swL3Ipv6DHCPv6CPDAddrCtrlPrefixName, swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr, swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen } ::= { swL3Ipv6DHCPv6CPDAddrCtrlTable 1 } SwL3Ipv6DHCPv6CPDAddrCtrlEntry ::= SEQUENCE { swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName DisplayString, swL3Ipv6DHCPv6CPDAddrCtrlPrefixName DisplayString, swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr Ipv6Address, swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen INTEGER, swL3Ipv6DHCPv6CPDAddrCtrlState RowStatus } swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface. " ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 1 } swL3Ipv6DHCPv6CPDAddrCtrlPrefixName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the prefix based on which the IPv6 address will be generate. " ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 2 } swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the suffix of the IPv6 address." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 3 } swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the prefix length of this IPv6 address." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 4 } swL3Ipv6DHCPv6CPDAddrCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table." ::= { swL3Ipv6DHCPv6CPDAddrCtrlEntry 5 } swL3IpCtrlAllIpIfState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates all interface function state of the device. (except the loopback interface)" ::= { swL3IpCtrlMgmt 7 } swL3LoopBackIpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3LoopBackIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains loopback IP interface information." ::= { swL3IpCtrlMgmt 8 } swL3LoopBackIpCtrlEntry OBJECT-TYPE SYNTAX SwL3LoopBackIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific loopback IP interface." INDEX { swL3LoopBackIpCtrlInterfaceName } ::= { swL3LoopBackIpCtrlTable 1 } SwL3LoopBackIpCtrlEntry ::= SEQUENCE { swL3LoopBackIpCtrlInterfaceName DisplayString, swL3LoopBackIpCtrlIfIndex INTEGER, swL3LoopBackIpCtrlIpAddr IpAddress, swL3LoopBackIpCtrlIpSubnetMask IpAddress, swL3LoopBackIpCtrlAdminState INTEGER, swL3LoopBackIpCtrlRowStatus RowStatus } swL3LoopBackIpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the loopback IP interface." ::= { swL3LoopBackIpCtrlEntry 1 } swL3LoopBackIpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable." ::= { swL3LoopBackIpCtrlEntry 2 } swL3LoopBackIpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the loopback interface. This object only can take the value of the unicast IP address." ::= { swL3LoopBackIpCtrlEntry 3 } swL3LoopBackIpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP net mask for this loopback interface." ::= { swL3LoopBackIpCtrlEntry 4 } swL3LoopBackIpCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the loopback IP interface." ::= { swL3LoopBackIpCtrlEntry 5 } swL3LoopBackIpCtrlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3LoopBackIpCtrlEntry 6 } -- ----------------------------------------------------------------------------- -- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- ******************************************************************** swL3IpFdbInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets." ::= { swL3IpFdbMgmt 1 } swL3IpFdbInfoEntry OBJECT-TYPE SYNTAX SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific IP address for which the bridge has some forwarding and/or filtering information." INDEX { swL3IpFdbInfoIpAddr } ::= { swL3IpFdbInfoTable 1 } SwL3IpFdbInfoEntry ::= SEQUENCE { -- swL3IpFdbInfoRdIndex -- INTEGER, swL3IpFdbInfoIpAddr IpAddress, swL3IpFdbInfoIpSubnetMask IpAddress, swL3IpFdbInfoPort INTEGER, swL3IpFdbInfoType INTEGER } -- swL3IpFdbInfoRdIndex OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The object indicates the IP routing domain index, and should -- be associated with one of swL3IpDomainStatsIndex." -- ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP address for which switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP net mask for this interface for which the switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 2 } swL3IpFdbInfoPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the port number of the port on which packets having an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address." ::= { swL3IpFdbInfoEntry 3 } swL3IpFdbInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), dynamic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry." ::= { swL3IpFdbInfoEntry 4 } -- ******************************************************************** -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- ******************************************************************** -- swL3IpFilterAddrConfig OBJECT IDENTIFIER ::= { swL3IpFilterMgmt 1 } -- swL3IpFilterAddrMaxSupportedEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Maximum number of entries in the IP address filtering table -- (swL3IpFilterAddrCtrlTable) ." -- ::= { swL3IpFilterAddrConfig 1 } -- swL3IpFilterAddrCurrentTotalEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current applied number of entries in the IP address filtering -- table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it -- means there are two entries in swL3IpFilterAddrCtrlTable." -- ::= { swL3IpFilterAddrConfig 2 } -- swL3IpFilterAddrCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table defines the information for the device to filter packets -- with specific IP addresses (either as the DA and/or as the SA). -- The IP address can be either a unicast address or a multicast address. -- This table has a higher priority then both the static FDB table and -- the IGMP table. It means that if an IP address appears in this table -- it will also appear on the static FDB table, the device will use the -- information provided in this table to process the packet." -- ::= { swL3IpFilterAddrConfig 3 } -- swL3IpFilterAddrCtrlEntry OBJECT-TYPE -- SYNTAX SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information about a specific unicast/multicast IP -- address for which the switch has filtering information." -- INDEX { swL3IpFilterAddrIpAddr } -- ::= { swL3IpFilterAddrCtrlTable 1 } -- SwL3IpFilterAddrCtrlEntry ::= -- SEQUENCE { -- swL3IpFilterAddrIpAddr -- IpAddress, -- swL3IpFilterAddrIpSktGE -- INTEGER, -- swL3IpFilterAddrIpSktLE -- INTEGER, -- swL3IpFilterAddrCtrlState -- INTEGER -- } -- swL3IpFilterAddrIpAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates a unicast/multicast IP address for which -- the switch has filtering information. But if the -- swL3IpFilterAddrCtrlState = src-addr, then the object can not be -- a multicast IP address (Class D IP address)." -- ::= { swL3IpFilterAddrCtrlEntry 1 } -- swL3IpFilterAddrIpSktGE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be greater than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- swL3IpFilterAddrIpSktLE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be less than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 3 } -- swL3IpFilterAddrCtrlState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- dst-addr(2), -- src-addr(3), -- dst-src-addr(4), -- invalid(5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- other (1) - This entry is currently in use but the conditions -- under which it will remain so are different from each of the -- following values. -- dst-addr (2) - Received frames's destination addresses are -- currently filtered when they match with an IP -- address entry of the table. -- src-addr (3) - Received frames's source addresses are currently -- filtered when they match with an IP address entry of -- the table. -- dst-src-addr (4) - Received frames's destination addresses or -- source addresses are currently filtered when they match -- with the IP address of an entry on the table. -- invalid (5) ¡V If this value is written to the object, the -- corresponding entry will be removed from the table." -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- ******************************************************************** -- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 } -- ******************************************************************** swL3IpArpAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period in minutes for aging out dynamically learned arp information." ::= { swL3IpMgmt 4 } -- ******************************************************************** -- swL3IpStaticRouteTable OBJECT IDENTIFIER ::= { swL3IpMgmt 5 } -- ******************************************************************** swL3IpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP static Routing table." ::= { swL3IpMgmt 5 } swL3IpStaticRouteEntry OBJECT-TYPE SYNTAX SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry is built,it shouldn't be modified.That is,it just supports create and delete actions." INDEX { swL3IpStaticRouteDest, swL3IpStaticRouteMask, swL3IpStaticRouteNextHop } ::= { swL3IpStaticRouteTable 1 } SwL3IpStaticRouteEntry ::= SEQUENCE { swL3IpStaticRouteDest IpAddress, swL3IpStaticRouteMask IpAddress, swL3IpStaticRouteBkupState INTEGER, swL3IpStaticRouteNextHop IpAddress, swL3IpStaticRouteMetric INTEGER, swL3IpStaticRouteStatus INTEGER, swL3IpStaticRouteWeight INTEGER, swL3IpStaticRouteInterfaceName DisplayString } swL3IpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x." ::= { swL3IpStaticRouteEntry 1 } swL3IpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-AND with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest." ::= { swL3IpStaticRouteEntry 2 } swL3IpStaticRouteBkupState OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The routing state for this route.The value SHOULD be primary(1), backup(2) or none(3)." ::= { swL3IpStaticRouteEntry 3 } swL3IpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the IP address for the next hop router. An IP address of 255.255.255.255 denotes a Null interface as the next hop." ::= { swL3IpStaticRouteEntry 4 } swL3IpStaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the routing metric for this route." ::= { swL3IpStaticRouteEntry 5 } swL3IpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3), active(4), inActive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table." ::= { swL3IpStaticRouteEntry 6 } swL3IpStaticRouteWeight OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the weight value. Used for the weighted multipath." ::= { swL3IpStaticRouteEntry 7 } swL3IpStaticRouteInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the name of the IP interface." ::={ swL3IpStaticRouteEntry 8} -- ----------------------------------------------------------------------------- -- swL3IpStaticRouteTunnelTable OBJECT IDENTIFIER ::= { swL3IpMgmt 7 } -- ----------------------------------------------------------------------------- swL3IpStaticRouteTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpStaticRouteTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IPv4 static Routing tunnel table." ::= { swL3IpMgmt 7 } swL3IpStaticRouteTunnelEntry OBJECT-TYPE SYNTAX SwL3IpStaticRouteTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry is built, it cannot be modified. That is, it just supports create and delete actions." INDEX { swL3IpStaticRouteDest, swL3IpStaticRouteMask, swL3IpStaticRouteTunnelInterfaceName } ::= { swL3IpStaticRouteTunnelTable 1 } SwL3IpStaticRouteTunnelEntry ::= SEQUENCE { swL3IpStaticRouteTunnelInterfaceName DisplayString, swL3IpStaticRouteTunnelRowStatus RowStatus } swL3IpStaticRouteTunnelInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP tunnel interface." ::= { swL3IpStaticRouteTunnelEntry 1 } swL3IpStaticRouteTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3IpStaticRouteTunnelEntry 2 } -- ******************************************************************** -- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 } -- ******************************************************************** swL3RelayDnsState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DNS Relay function is enabled or disabled." ::= { swL3RelayDnsMgmt 1 } swL3RelayDnsPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the primary DNS server." ::= { swL3RelayDnsMgmt 2 } swL3RelayDnsSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the secondary DNS server." ::= { swL3RelayDnsMgmt 3 } swL3RelayDnsCacheState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DNS Relay cache is enabled or disabled." ::= { swL3RelayDnsMgmt 4 } swL3RelayDnsStaticTableState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DNS Relay static table is enabled or disabled." ::= { swL3RelayDnsMgmt 5 } swL3RelayDnsCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays the current DNS relay static table." ::= { swL3RelayDnsMgmt 6 } swL3RelayDnsCtrlEntry OBJECT-TYPE SYNTAX SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information display the current DNS relay static table." INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr} ::= { swL3RelayDnsCtrlTable 1 } SwL3RelayDnsCtrlEntry ::= SEQUENCE { swL3RelayDnsCtrlDomainName DisplayString, swL3RelayDnsCtrlIpAddr IpAddress, swL3RelayDnsCtrlState INTEGER } swL3RelayDnsCtrlDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The domain name of the entry." ::= { swL3RelayDnsCtrlEntry 1 } swL3RelayDnsCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the entry." ::= { swL3RelayDnsCtrlEntry 2 } swL3RelayDnsCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL3RelayDnsCtrlEntry 3 } -- ******************************************************************** -- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 } -- ******************************************************************** swL3RouteRedistriTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol." ::= { swL3MgmtMIB 5 } swL3RouteRedistriEntry OBJECT-TYPE SYNTAX SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the route redistribution table." INDEX { swL3RouteRedistriSrcProtocol, swL3RouteRedistriDstProtocol} ::= { swL3RouteRedistriTable 1 } SwL3RouteRedistriEntry ::= SEQUENCE { swL3RouteRedistriSrcProtocol INTEGER, swL3RouteRedistriDstProtocol INTEGER, swL3RouteRedistriType INTEGER, swL3RouteRedistriMetric Unsigned32, swL3RouteRedistriRowStatus RowStatus } swL3RouteRedistriSrcProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rip(2), ospf(3), static(4), local(5), bgp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the source device." ::= { swL3RouteRedistriEntry 1 } swL3RouteRedistriDstProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rip(2), ospf(3), bgp(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the destination device." ::= { swL3RouteRedistriEntry 2 } swL3RouteRedistriType OBJECT-TYPE SYNTAX INTEGER { other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the selection of one of the methods for calculating the metric value." ::= { swL3RouteRedistriEntry 3 } swL3RouteRedistriMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value." ::= { swL3RouteRedistriEntry 4 } swL3RouteRedistriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3RouteRedistriEntry 5 } -- ******************************************************************* -- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } -- ******************************************************************* swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } swL3RoutePreferenceRIP OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of RIP." ::= { swL3RoutePreference 1 } swL3RoutePreferenceStatic OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of Static." ::= { swL3RoutePreference 3 } swL3RoutePreferenceLocal OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to read the route preference of Local." ::= { swL3RoutePreference 4 } swL3RoutePreferenceDefault OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the route preference of Default route." ::= { swL3RoutePreference 8 } -- ----------------------------------------------------------------------------- -- swL3VrrpOperMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 14 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- L3 VRRP Operations Table -- ----------------------------------------------------------------------------- swL3VrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'swL3vrrpOperEntry' items." ::= { swL3VrrpOperMgmt 1 } swL3VrrpOperEntry OBJECT-TYPE SYNTAX SwL3VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `swL3VrrpOperAdminState' is `disabled' and the `swL3VrrpOperState' has transitioned to `initialize'." INDEX { swL3VrrpOperIfIndex, swL3VrrpOperVrId } ::= { swL3VrrpOperTable 1 } SwL3VrrpOperEntry ::= SEQUENCE { swL3VrrpOperIfIndex Integer32, swL3VrrpOperVrId VrId, swL3VrrpOperVirtualMacAddr MacAddress, swL3VrrpOperState INTEGER, swL3VrrpOperAdminState INTEGER, swL3VrrpOperPriority Integer32, swL3VrrpOperMasterIpAddr IpAddress, swL3VrrpOperCriticalIpAddr IpAddress, swL3VrrpOperCheckCriticalIpState INTEGER, swL3VrrpOperAuthType INTEGER, swL3VrrpOperAuthKey OCTET STRING, swL3VrrpOperAdvertisementInterval Integer32, swL3VrrpOperPreemptMode TruthValue, swL3VrrpOperVirtualRouterUpTime TimeStamp, swL3VrrpOperVirtualIpAddr IpAddress, swL3VrrpOperRowStatus RowStatus } swL3VrrpOperIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface for which VRRP is enabled." ::= { swL3VrrpOperEntry 1 } swL3VrrpOperVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { swL3VrrpOperEntry 2 } swL3VrrpOperVirtualMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'swL3VrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." ::= { swL3VrrpOperEntry 3 } swL3VrrpOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `swL3VrrpOperAdminState' object (below) initiates transitions in the value of this object." ::= { swL3VrrpOperEntry 4 } swL3VrrpOperAdminState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `swL3VrrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `swL3VrrpOperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the `swL3VrrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'." DEFVAL { down } ::= { swL3VrrpOperEntry 5 } swL3VrrpOperPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." DEFVAL { 100 } ::= { swL3VrrpOperEntry 6 } swL3VrrpOperMasterIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router." ::= { swL3VrrpOperEntry 7 } swL3VrrpOperCriticalIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `swL3VrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { swL3VrrpOperEntry 8 } swL3VrrpOperCheckCriticalIpState OBJECT-TYPE SYNTAX INTEGER{ other(0), disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Critical IP state." ::= { swL3VrrpOperEntry 9 } swL3VrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), -- VRRP protocol exchanges are not -- authenticated. simpleTextPassword(2), -- Exchanges are authenticated by a -- clear text password. ipAuthenticationHeader(3) -- Exchanges are authenticated using -- the IP authentication header. } MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { noAuthentication } ::= { swL3VrrpOperEntry 10 } swL3VrrpOperAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Key. This object is set according to the value of the 'swL3VrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, swL3VrrpOperAuthKey always returns an Octet String of length zero." ::= { swL3VrrpOperEntry 11 } swL3VrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements." DEFVAL { 1 } ::= { swL3VrrpOperEntry 12 } swL3VrrpOperPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { swL3VrrpOperEntry 13 } swL3VrrpOperVirtualRouterUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `swL3VrrpOperState') transitioned out of `initialized'." ::= { swL3VrrpOperEntry 14 } swL3VrrpOperVirtualIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { swL3VrrpOperEntry 15 } swL3VrrpOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `swL3VrrpOperAdminState', can be modified. Prior to setting the `swL3VrrpOperRowStatus' object from `active' to a different value, the `swL3VrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `swL3VrrpOperVrId' has been set and there is at least one active row in the `swL3VrrpAssoIpAddrTable' defining an associated IP address for the virtual router." ::= { swL3VrrpOperEntry 16 } swL3RIPUpdateTime OBJECT-TYPE SYNTAX INTEGER (5..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the RIP update timer." DEFVAL {30} ::={swL3RIPTimerMgmt 1} swL3RIPTimeOutTime OBJECT-TYPE SYNTAX INTEGER (5..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the RIP time out timer." DEFVAL {180} ::={swL3RIPTimerMgmt 2} swL3RIPGarbageCollectionTime OBJECT-TYPE SYNTAX INTEGER (5..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the RIP garbage collection timer." DEFVAL {120} ::={swL3RIPTimerMgmt 3} -- ----------------------------------------------------------------------------- -- swL3Route6RedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 20 } -- ----------------------------------------------------------------------------- swL3Route6RedistriTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Route6RedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol." ::= { swL3MgmtMIB 20 } swL3Route6RedistriEntry OBJECT-TYPE SYNTAX SwL3Route6RedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the IPv6 route redistribution table." INDEX { swL3Route6RedistriSrcProtocol, swL3Route6RedistriDstProtocol} ::= { swL3Route6RedistriTable 1 } SwL3Route6RedistriEntry ::= SEQUENCE { swL3Route6RedistriSrcProtocol INTEGER, swL3Route6RedistriDstProtocol INTEGER, swL3Route6RedistriType INTEGER, swL3Route6RedistriMetric Unsigned32, swL3Route6RedistriRowStatus RowStatus } swL3Route6RedistriSrcProtocol OBJECT-TYPE SYNTAX INTEGER { local(1), static(2), ripng(3), ospfv3(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the source device." ::= { swL3Route6RedistriEntry 1 } swL3Route6RedistriDstProtocol OBJECT-TYPE SYNTAX INTEGER { ripng(1), ospfv3(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol of the destination device." ::= { swL3Route6RedistriEntry 2 } swL3Route6RedistriType OBJECT-TYPE SYNTAX INTEGER { type-1(1), type-2(2), all(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the selection of one of the methods for calculating the metric value." ::= { swL3Route6RedistriEntry 3 } swL3Route6RedistriMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the entry of an OSPFv3 interface cost. This is analogous to a Hop Count in the RIPng routing protocol. The value '0' indicates default value." ::= { swL3Route6RedistriEntry 4 } swL3Route6RedistriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3Route6RedistriEntry 5 } END