------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- -- ------------------------------------------------------------------------------ -- Groups in the company MIB -- -- The following groups are supported for company -- -- Active.... -- companyCommGroup Permits the user to configure the communities -- companyHostGroup Permits the user to configure the hosts -- companyMiscGroup Permits the user to configure miscellaneous items -- companySpanGroup Permits the user to configure Spanning Tree -- -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ DES-1526-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 enterprises, Counter, TimeTicks, IpAddress FROM RFC1155-SMI mib-2, DisplayString, PhysAddress FROM RFC1213-MIB; d-link OBJECT IDENTIFIER ::= { enterprises 171 } dlink-products OBJECT IDENTIFIER ::= { d-link 10 } dlink-DES1526SeriesProd OBJECT IDENTIFIER ::= { dlink-products 60} DES-1526 OBJECT IDENTIFIER ::= { dlink-DES1526SeriesProd 1 } -- textual conventions OwnerString ::= DisplayString MacAddress ::= OCTET STRING (SIZE (6)) PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING (SIZE (6)) RowStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "" SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } -- This data type is used to model an administratively -- assigned name of the owner of a resource. This -- information is taken from the NVT ASCII character set. -- It is suggested that this name contain one or more -- of the following: -- IP address, management station name, network manager's -- name, location, or phone number. -- In some cases the agent itself will be the owner of -- an entry. In these cases, this string shall be set -- to a string starting with 'monitor'. -- -- SNMP access control is articulated entirely in terms of -- the contents of MIB views; access to a particular SNMP -- object instance depends only upon its presence or -- absence in a particular MIB view and never upon its -- value or the value of related object instances. Thus, -- objects of this type afford resolution of resource -- contention only among cooperating managers; they -- realize no access control function with respect -- to uncooperative parties. -- -- By convention, objects with this syntax are declared -- as having -- -- SIZE (0..127) -- -- company Enterprise MIB Extensions -- companyCommGroup OBJECT IDENTIFIER ::= { DES-1526 1 } -- companyHostGroup OBJECT IDENTIFIER ::= { DES-1526 2 } companyMiscGroup OBJECT IDENTIFIER ::= { DES-1526 3 } -- companySpanGroup OBJECT IDENTIFIER ::= { DES-1526 4 } -- companyConfigGroup OBJECT IDENTIFIER ::= { DES-1526 11 } -- companyPVlanGroup OBJECT IDENTIFIER ::= { DES-1526 12 } companyTVlanGroup OBJECT IDENTIFIER ::= { DES-1526 13 } companyPortTrunkGroup OBJECT IDENTIFIER ::= { DES-1526 14 } -- -- company Extension MIB, Set Community Information -- commSetTable OBJECT-TYPE SYNTAX SEQUENCE OF CommSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Set Community Entries " ::= { companyCommGroup 1 } commSetEntry OBJECT-TYPE SYNTAX CommSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Set Community properties" INDEX { commSetIndex } ::= { commSetTable 1 } CommSetEntry ::= SEQUENCE { commSetIndex INTEGER, commSetName DisplayString, commSetStatus RowStatus } commSetIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported." ::= { commSetEntry 1 } commSetName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of this SNMP Set Community Entry." ::= { commSetEntry 2 } commSetStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The RowStatus for the Set Community entry." ::= { commSetEntry 3 } -- -- company Extension MIB, Get Community Information -- commGetTable OBJECT-TYPE SYNTAX SEQUENCE OF CommGetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Get Community Entries " ::= { companyCommGroup 2 } commGetEntry OBJECT-TYPE SYNTAX CommGetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Get Community properties" INDEX { commGetIndex } ::= { commGetTable 1 } CommGetEntry ::= SEQUENCE { commGetIndex INTEGER, commGetName DisplayString, commGetStatus RowStatus } commGetIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported." ::= { commGetEntry 1 } commGetName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of this SNMP Get Community Entry." ::= { commGetEntry 2 } commGetStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The RowStatus for the Get Community entry." ::= { commGetEntry 3 } -- -- company Extension MIB, Trap Community Information -- commTrapTable OBJECT-TYPE SYNTAX SEQUENCE OF CommTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Trap Community Entries " ::= { companyCommGroup 3 } commTrapEntry OBJECT-TYPE SYNTAX CommTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SNMP Trap Community properties" INDEX { commTrapIndex } ::= { commTrapTable 1 } CommTrapEntry ::= SEQUENCE { commTrapIndex INTEGER, commTrapName DisplayString, commTrapIpAddress IpAddress, commTrapVlanId INTEGER, commTrapSNMPBootup INTEGER, commTrapSNMPTPLinkUpDown INTEGER, commTrapSNMPFiberLinkUpDown INTEGER, -- commTrapTrapInsertRemove INTEGER, commTrapTrapAbnormalTPRXError INTEGER, commTrapTrapAbnormalTPTXError INTEGER, commTrapTrapAbnormalFiberRXError INTEGER, commTrapTrapAbnormalFiberTXError INTEGER, commTrapTrapPOEPowerFail INTEGER, commTrapTrapPOEPortOvercurrent INTEGER, commTrapTrapPOEPortShort INTEGER, commTrapStatus RowStatus } commTrapIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported." ::= { commTrapEntry 1 } commTrapName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of this SNMP Trap Community Entry." ::= { commTrapEntry 2 } commTrapIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of this SNMP Trap Community Entry." ::= { commTrapEntry 3 } commTrapVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Trap VLAN identifier of this SNMP Trap Community Entry. The value must be from 1 to 4094." ::= { commTrapEntry 4 } commTrapSNMPBootup OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Bootup trap" ::= { commTrapEntry 5 } commTrapSNMPTPLinkUpDown OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Twisted Pair link up / link down trap" ::= { commTrapEntry 6 } commTrapSNMPFiberLinkUpDown OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Fiber link up / link down trap" ::= { commTrapEntry 7 } -- commTrapTrapInsertRemove OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Fiber Inserted / removed trap" -- ::= { commTrapEntry 8 } commTrapTrapAbnormalTPRXError OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Twisted Pair abnormal receive error trap" ::= { commTrapEntry 9 } commTrapTrapAbnormalTPTXError OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Twisted Pair abnormal transmit error trap" ::= { commTrapEntry 10 } commTrapTrapAbnormalFiberRXError OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Fiber abnormal receive error trap" ::= { commTrapEntry 11 } commTrapTrapAbnormalFiberTXError OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Fiber abnormal transmit error trap" ::= { commTrapEntry 12 } --poe private trap commTrapTrapPOEPowerFail OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PoE POWER Fail" ::= { commTrapEntry 13 } commTrapTrapPOEPortOvercurrent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PoE port Overcurrent" ::= { commTrapEntry 14 } commTrapTrapPOEPortShort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "PoE port Shortcircuit" ::= { commTrapEntry 15 } commTrapStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The RowStatus for the Trap Community entry." ::= { commTrapEntry 16 } -- commTable OBJECT-TYPE -- SYNTAX SEQUENCE OF CommEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of SNMP Community Entries " -- ::= { companyCommGroup 1 } -- -- commEntry OBJECT-TYPE -- SYNTAX CommEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of SNMP Community properties" -- INDEX { commIndex } -- ::= { commTable 1 } -- -- CommEntry ::= SEQUENCE { -- commIndex INTEGER, -- commName DisplayString, -- commGet INTEGER, -- commSet INTEGER, -- commTrap INTEGER, -- commStatus INTEGER -- } -- -- commIndex OBJECT-TYPE -- SYNTAX INTEGER (1..2) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "An index that uniquely identifies an entry in the -- Community Table. Eight entries are currently supported." -- ::= { commEntry 1 } -- -- commName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..20)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The name of this SNMP Community Entry." -- ::= { commEntry 2 } -- -- commGet OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The GET permission for the community. A (1) indicates a -- GET enable. A (2) indicates a GET disable." -- ::= { commEntry 3 } -- -- commSet OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The SET permission for the community. A (1) indicates a -- SET enable. A (2) indicates a SET disable." -- ::= { commEntry 4 } -- -- commTrap OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The TRAP permission for the community. A (1) indicates a -- TRAP enable. A (2) indicates a TRAP disable." -- ::= { commEntry 5 } -- -- commStatus OBJECT-TYPE -- SYNTAX INTEGER (1..6) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The RowStatus for the community entry." -- ::= { commEntry 6 } -- -- -- -- company Extension MIB, Host Information -- -- -- hostTable OBJECT-TYPE -- SYNTAX SEQUENCE OF HostEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of SNMP Trusted Host Entries " -- ::= { companyHostGroup 1 } -- -- hostEntry OBJECT-TYPE -- SYNTAX HostEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of SNMP Host properties" -- INDEX { hostIndex } -- ::= { hostTable 1 } -- -- HostEntry ::= SEQUENCE { -- hostIndex INTEGER, -- hostName DisplayString, -- hostIP IpAddress, -- hostComm DisplayString, -- hostStatus INTEGER -- } -- -- hostIndex OBJECT-TYPE -- SYNTAX INTEGER (1..16) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "An index that uniquely identifies an entry in the -- Host Table. Sixteen entries are currently supported." -- ::= { hostEntry 1 } -- -- hostName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..31)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The name of this Host Entry." -- ::= { hostEntry 2 } -- -- hostIP OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The IP Address for the host." -- ::= { hostEntry 3 } -- -- hostComm OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..31)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The name of the community this host belongs to." -- ::= { hostEntry 4 } -- -- hostStatus OBJECT-TYPE -- SYNTAX INTEGER (1..6) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The RowStatus for the community entry." -- ::= { hostEntry 5 } -- -- company Extension MIB, Miscellaneous Information -- -- miscReset OBJECT-TYPE -- SYNTAX INTEGER { -- reset(1), -- noop(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Physically resets the unit - use with care. A (1) resets -- the unit, a (2) does nothing." -- ::= { companyMiscGroup 2 } miscStatisticsReset OBJECT-TYPE SYNTAX INTEGER { reset(1), noop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Resets the units statistics. A (1) resets the unit, a (2) does nothing." ::= { companyMiscGroup 3 } -- -- company Extension MIB, Spanning Tree Configuration -- -- spanOnOff OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Enable/Disable Spanning Tree. A (1) enables, a (2) disables." -- ::= { companySpanGroup 1 } -- --------------------------------------------------------------------- -- Products Extension -- --------------------------------------------------------------------- configVerSwPrimary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) ACCESS read-only STATUS mandatory DESCRIPTION "The software image version string" ::= { companyConfigGroup 1 } configVerHwChipSet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) ACCESS read-only STATUS mandatory DESCRIPTION "The hardware chipset version string" ::= { companyConfigGroup 2 } -- configBootMode OBJECT-TYPE -- SYNTAX INTEGER { -- lastSaved(1), -- net(2), -- netAndSave(3) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Defines the method used for downloading the image when reset." -- ::= { companyConfigGroup 3 } -- -- configBootFtpServerIp OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The FTP server's IP address used for downloading the -- boot image" -- ::= { companyConfigGroup 4 } -- -- configBootImageFileName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..63)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The path and filename of the boot image to download" -- ::= { companyConfigGroup 5 } configPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfigPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces." ::= { companyConfigGroup 6 } configPortEntry OBJECT-TYPE SYNTAX ConfigPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An enterprise specific interface entry." INDEX { configPort } ::= { configPortTable 1 } -- ConfigPortEntry ::= SEQUENCE { -- configPort INTEGER, -- configPortDuplex INTEGER, -- configPortDataRate INTEGER, -- configPortDuplexOper INTEGER, -- configPortDataRateOper INTEGER, -- configPortStateOper INTEGER, -- configPortFlowControl INTEGER, -- configPortDefaultVlanId INTEGER, -- configPortComments DisplayString, -- configPortAutoNegotiation INTEGER, -- configPortFlowControlOper INTEGER, -- configPortGBIC INTEGER, -- configPortFastLink INTEGER, -- configPortPriority INTEGER, -- configPortBroadcastControl INTEGER -- } ConfigPortEntry ::= SEQUENCE { configPort INTEGER, configPortSpeed INTEGER, configPortOperStatus INTEGER, configPortFlowControl INTEGER, configPortFlowControlOper INTEGER, configPortPriority INTEGER } configPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber." ::= { configPortEntry 1 } configPortSpeed OBJECT-TYPE SYNTAX INTEGER { disable(1), auto(2), rate10M-Half(3), rate10M-Full(4), rate100M-Half(5), rate100M-Full(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's speed desired state." ::= { configPortEntry 2 } configPortOperStatus OBJECT-TYPE SYNTAX INTEGER { down(1), rate10M-Half(2), rate10M-Full(3), rate100M-Half(4), rate100M-Full(5), rate1G-Half(6), rate1G-Full(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's operating speed state." ::= { configPortEntry 3 } configPortFlowControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled." ::= { configPortEntry 4 } configPortFlowControlOper OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's operating flow control state." ::= { configPortEntry 5 } configPortPriority OBJECT-TYPE SYNTAX INTEGER { normal(1), high(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's current priority." ::= { configPortEntry 6 } -- -- VLAN Mode -- -- configVLANMode OBJECT-TYPE -- SYNTAX INTEGER { -- modePortBased(1), -- modeTagBased(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Determines the VLAN mode." -- ::= { companyConfigGroup 7 } -- -- Additional Configuration objects -- -- --------------------------------------------------------------------- -- Mirror -- --------------------------------------------------------------------- configMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfigMirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the Mirror" ::= { companyConfigGroup 8 } configMirrorEntry OBJECT-TYPE SYNTAX ConfigMirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Mirror entry containing the Mirror id and mode" INDEX { configMirrorId } ::= { configMirrorTable 1 } ConfigMirrorEntry ::= SEQUENCE { configMirrorId INTEGER, configMirrorMode INTEGER, configMirrorMon INTEGER, configMirrorSrc PortList, configMirrorStatus RowStatus } configMirrorId OBJECT-TYPE SYNTAX INTEGER (1) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the Mirror Table. One entries are currently supported." ::= { configMirrorEntry 1 } configMirrorMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), Rx(1), Tx(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When deciding the mirroring source port, then Mirror mode will be available." ::= { configMirrorEntry 2 } configMirrorMon OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled." ::= { configMirrorEntry 3 } configMirrorSrc OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { configMirrorEntry 4 } configMirrorStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The RowStatus for the Mirror entry." ::= { configMirrorEntry 5 } -- --------------------------------------------------------------------- -- SNMP Function -- --------------------------------------------------------------------- configSNMPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable SNMP function. A (1) enables, a (2) disables." ::= { companyConfigGroup 9 } -- --------------------------------------------------------------------- -- -- --------------------------------------------------------------------- configIpAssignmentMode OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcp(2), other(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the device address is assigned by the user (manual), or DHCP, or Others(BootP)." ::= { companyConfigGroup 12 } configPhysAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station." ::= { companyConfigGroup 13 } configPasswordAdmin OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS write-only STATUS mandatory DESCRIPTION "The adminstrator password" ::= { companyConfigGroup 15 } configIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address for the RDU box." ::= { companyConfigGroup 16 } configNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network mask for the RDU box." ::= { companyConfigGroup 17 } configGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Gatway Address for the unit." ::= { companyConfigGroup 18 } configSave OBJECT-TYPE SYNTAX INTEGER { save(1), noop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing." ::= { companyConfigGroup 19 } -- configVerBootRomImage OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..31)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The Boot ROM version string" -- ::= { companyConfigGroup 21 } configRestoreDefaults OBJECT-TYPE SYNTAX INTEGER { restore(1), noop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Restores the configuration of the unit to the original settings." ::= { companyConfigGroup 22 } -- configIGMPOnOff OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Enable or disable the IGMP protocol within the switch." -- ::= { companyConfigGroup 23 } -- -- configWebOnOff OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Enable or disable the Web Interface." -- ::= { companyConfigGroup 24 } -- -- configHighPriorityOptimization OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Enable or disable high priority optimization." -- ::= { companyConfigGroup 25 } -- -- configUserAuthenticationMode OBJECT-TYPE -- SYNTAX INTEGER { -- basicPasswordOnly(1), -- basicPasswordThenRemoteRADIUS(2), -- remoteRADIUSOnly(4) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Determines whether the user password will be authenticated -- by the switch, a remote RADIUS server, or some combination -- of the two." -- ::= { companyConfigGroup 27 } -- -- configRadiusServerIpAddress OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The IP Address of the RADIUS server used for remote -- user authentication." -- ::= { companyConfigGroup 28 } -- -- configRadiusSharedSecret OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..32)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "A string of characters used in the RADIUS password -- encryption process." -- ::= { companyConfigGroup 29 } -- -- configTelnetConsole OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Enable or disable the telnet console." -- ::= { companyConfigGroup 30 } -- --------------------------------------------------------------------- -- DiffServ -- --------------------------------------------------------------------- -- configDiffServTable OBJECT-TYPE -- SYNTAX SEQUENCE OF ConfigDiffServEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of DSCP Priorities." -- ::= { companyConfigGroup 31 } -- -- configDiffServEntry OBJECT-TYPE -- SYNTAX ConfigDiffServEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "An enterprise specific DSCP entry." -- INDEX { configDiffServDSCP } -- ::= { configDiffServTable 1 } -- -- ConfigDiffServEntry ::= SEQUENCE { -- configDiffServDSCP INTEGER, -- configDiffServPriority INTEGER -- } -- -- configDiffServDSCP OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "A DSCP value (0 - 63)." -- ::= { configDiffServEntry 1 } -- -- configDiffServPriority OBJECT-TYPE -- SYNTAX INTEGER { -- normal(1), -- high(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The DSCP's current priority setting." -- ::= { configDiffServEntry 2 } -- configTftpServerIpAddress OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The IP Address of the tftp server used to upload and -- download configuration files. This object is to be used -- in conjunction with configTftpServerFileName and -- configTftpOperation." -- ::= { companyConfigGroup 32 } -- -- configTftpServerFileName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..64)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The filename, including the path, used to store or -- retrieve a configuration file from the tftp server. -- This object is to be used in conjunction with -- configTftpServerIpAddress and configTftpOperation." -- ::= { companyConfigGroup 33 } -- -- configTftpOperation OBJECT-TYPE -- SYNTAX INTEGER { -- download(1), -- upload(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The tftp operation to perform. Either download a -- configuration to the unit or upload the current -- configuration to the tftp server. This object is -- to be used in conjunction with -- configTftpServerIpAddress and configTftpServerFileName." -- ::= { companyConfigGroup 34 } -- --------------------------------------------------------------------- -- -- --------------------------------------------------------------------- -- configIpFilter OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Determines if access to the device is limited to only -- those IP addresses specified in the configIpFilterTable." -- ::= { companyConfigGroup 35 } -- -- configIpFilterTable OBJECT-TYPE -- SYNTAX SEQUENCE OF ConfigIpFilterEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of IP addresses allowed access to this device." -- ::= { companyConfigGroup 36 } -- -- configIpFilterEntry OBJECT-TYPE -- SYNTAX ConfigIpFilterEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "An enterprise specific IP filter entry." -- INDEX { configIpFilterIpAddress } -- ::= { configIpFilterTable 1 } -- -- ConfigIpFilterEntry ::= SEQUENCE { -- configIpFilterIpAddress IpAddress, -- configIpFilterStatus INTEGER -- } -- -- configIpFilterIpAddress OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "An IP address which is allowed access to this device." -- ::= { configIpFilterEntry 1 } -- -- configIpFilterStatus OBJECT-TYPE -- SYNTAX INTEGER { -- active (1), -- destroy (6) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The status of an entry in the IP filter Table. Only -- a subset of the rowstatus variables (active, destroy) -- are available." -- ::= { configIpFilterEntry 2 } -- -- configUserName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..20)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The users login Id." -- ::= { companyConfigGroup 37 } -- -- configPasswordProtection OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Determines if a user must login before gaining access -- to the device." -- ::= { companyConfigGroup 38 } -- -- configPasswordEncryption OBJECT-TYPE -- SYNTAX INTEGER { -- clearText(1), -- encrypted(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Determines when the password is written to the -- configuration file whether it is written as clear -- text or encrypted format." -- ::= { companyConfigGroup 39 } -- -- configAuthServerIpAddress OBJECT-TYPE -- SYNTAX IpAddress -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The IP Address of the server used for 802.1x -- authentication." -- ::= { companyConfigGroup 40 } -- -- configAuthServerSharedSecret OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..32)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "A string of characters used in the RADIUS password -- encryption process by 802.1x authentication." -- ::= { companyConfigGroup 41 } -- -- The PVLAN group -- -- pvlanTable OBJECT-TYPE -- SYNTAX SEQUENCE OF PvlanEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A list of the Port-based VLANs" -- ::= { companyPVlanGroup 1 } -- -- pvlanEntry OBJECT-TYPE -- SYNTAX PvlanEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A Port-based VLAN entry containing the id and name." -- INDEX { pvlanId } -- ::= { pvlanTable 1 } -- -- PvlanEntry ::= SEQUENCE { -- pvlanId INTEGER, -- pvlanName DisplayString, -- pvlanMember PortList, -- pvlanStatus INTEGER -- } -- -- pvlanId OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The VLAN identifier. A maximum of 28 VLANs is supported. -- The value must be from 1 to 28" -- ::= { pvlanEntry 1 } -- -- pvlanName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..8)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The VLAN name associated with the Id." -- ::= { pvlanEntry 2 } -- -- pvlanMember OBJECT-TYPE -- SYNTAX PortList -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The set of the device's member ports that belong -- to the VLAN. -- Each octet within the value of this object specifies a -- set of eight ports, with the first octet specifying ports -- 1 through 8, the second octet specifying ports 9 -- through 16, etc. Within each octet, the most -- significant bit represents the lowest numbered -- port, and the least significant bit represents the -- highest numbered port. Thus, each port of the -- VLAN is represented by a single bit within the -- value of this object. If that bit has a value of -- '1' then that port is included in the set of -- ports; the port is not included if its bit has a -- value of '0'." -- -- ::= { pvlanEntry 3 } -- -- pvlanStatus OBJECT-TYPE -- SYNTAX INTEGER { -- active (1), -- createAndGo (4), -- destroy (6) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The status of an entry in the VLAN Table. Only a subset -- of the rowstatus variables (active, createAndGo, destroy) -- are available." -- ::= { pvlanEntry 5 } -- -- The TVLAN group -- tvlanTable OBJECT-TYPE SYNTAX SEQUENCE OF TvlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the VLANs" ::= { companyTVlanGroup 1 } tvlanEntry OBJECT-TYPE SYNTAX TvlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A VLAN entry containing the VLAN id and name." INDEX { tvlanId } ::= { tvlanTable 1 } TvlanEntry ::= SEQUENCE { tvlanId INTEGER, -- tvlanName DisplayString, tvlanMember PortList, tvlanUntaggedPorts PortList, tvlanStatus INTEGER } tvlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094." ::= { tvlanEntry 1 } -- tvlanName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..8)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The VLAN name associated with the VLAN Id." -- ::= { tvlanEntry 2 } tvlanMember OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { tvlanEntry 3 } tvlanUntaggedPorts OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "If that bit has a value of '1' the outgoing frame on the egress port is untagged. If that bit has a value of '0' the outgoing frame on the egress port is tagged." ::= { tvlanEntry 4 } tvlanStatus OBJECT-TYPE SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available." ::= { tvlanEntry 5 } tvlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TvlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ports and their associated VLAN." ::= { companyTVlanGroup 2 } tvlanPortEntry OBJECT-TYPE SYNTAX TvlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information pertaining to an individual port regarding to which VLAN it belongs." -- INDEX { tvlanPortPortId, tvlanPortVlanId } INDEX { tvlanPortPortId } ::= { tvlanPortTable 1 } TvlanPortEntry ::= SEQUENCE { tvlanPortPortId INTEGER, tvlanPortVlanId INTEGER, -- tvlanPortPriority INTEGER -- tvlanPortStatus INTEGER } tvlanPortPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A port identifier that is in the range of 1 to ifNumber." ::= { tvlanPortEntry 1 } tvlanPortVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The default VLAN identifier." ::= { tvlanPortEntry 2 } -- tvlanPortPriority OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The default priority." -- ::= { tvlanPortEntry 3 } -- tvlanPortTaggedMode OBJECT-TYPE -- SYNTAX INTEGER { -- untagged(1), -- tagged(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The tagged mode of a VLAN port." -- ::= { tvlanPortEntry 4 } -- tvlanPortStatus OBJECT-TYPE -- SYNTAX INTEGER { -- active (1), -- createAndGo (4), -- destroy (6) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The status of this port's association within this VLAN. Only -- a subset of the rowstatus variables (active, createAndGo, -- destroy) are available." -- ::= { tvlanPortEntry 5 } -- -- The Port Trunking Group -- portTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port trunks and their associated members." ::= { companyPortTrunkGroup 1 } portTrunkEntry OBJECT-TYPE SYNTAX PortTrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A port trunk entry containing the trunk id and trunk members." INDEX { portTrunkId, portTrunkMember } ::= { portTrunkTable 1 } PortTrunkEntry ::= SEQUENCE { portTrunkId INTEGER, portTrunkMember PortList, portTrunkMemberValue PortList, portTrunkEnable INTEGER } portTrunkId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port trunk identifier. The current range is from 1 to 4." ::= { portTrunkEntry 1 } portTrunkMember OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS mandatory DESCRIPTION "Trunk group 1 - 3 has eight members (Port 01/09/17 - 08/16/24). Trunk group 4 has two members (Port 25-26). Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { portTrunkEntry 2 } portTrunkMemberValue OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { portTrunkEntry 3 } portTrunkEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable Trunk group. A (1) enables, a (2) disables." ::= { portTrunkEntry 4 } -- ***************************************************************** -- -- Enterprise Trap group -- -- ***************************************************************** swFiberInsert TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Fiber insert trap" ::= 1 swFiberRemove TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Fiber remove trap" ::= 2 swFiberAbnormalRXError TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Fiber abnormal rx error trap" ::= 3 swFiberAbnormalTXError TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Fiber abnormal tx error trap" ::= 4 swTPAbnormalRXError TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Twisted Pair abnormal rx error trap" ::= 5 swTPAbnormalTXError TRAP-TYPE ENTERPRISE DES-1526 DESCRIPTION "Twisted Pair abnormal tx error trap" ::= 6 END