CORIANT-GROOVE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Counter64, Unsigned32
FROM SNMPv2-SMI -- http://www.ietf.org/rfc/rfc2578.txt
TEXTUAL-CONVENTION, DateAndTime, DisplayString, TruthValue, RowStatus,RowPointer
FROM SNMPv2-TC; -- http://www.ietf.org/rfc/rfc2579.txt
groove MODULE-IDENTITY
LAST-UPDATED "202206041006Z"
ORGANIZATION "Coriant R&D"
CONTACT-INFO "Contact Coriant Customer Service at http://www.coriant.com/services_support"
DESCRIPTION "SNMP MIB for Groove G30 release 4.5.2"
REVISION "202206041006Z"
DESCRIPTION "Auto-build version at 202206041006Z"
::= { products 2 }
AmplifierGainRangeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
standard (1),
low (2),
high (3),
notAvailable (4)
}
CoriantCommonOtnEncryStatusEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX BITS {
notAvailable (0),
handshake (1),
keyInitializing (2),
keyInSync (3),
unreachable (4),
mismatch (5),
connectFailed (6),
disabled (7),
encryptFail (8),
encryptNormal (9),
authenticationFailed (10),
trafficSquelched (11)
}
CoriantCommonOtnKeySyncSession ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Indicate the associated session for the ODU channel to synchronize keys.
"
SYNTAX OCTET STRING
CoriantCommonpmThresholdValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (1..32))
CoriantCommonpmUnitOfValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
dbm (1),
microseconds (2),
ps (3),
psNm (4),
db (5),
seconds (6),
packets (7),
events (8),
octets (9),
bits (10),
bitsS (11),
blocks (12),
times (13),
percentage (14),
bitRatio (15),
mhz (16),
celsius (17),
frames (18),
radsS (19)
}
CoriantFileSwTypesDeviceFwVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..64))
CoriantFileSwTypesDeviceName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..64))
CoriantFileSwTypesSwVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..20))
CoriantFileSwTypesSwloadProduct ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..32))
CoriantFileSwTypesSwloadVendor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..32))
CoriantFmtypesConditionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
idp (1),
rupDeg (2),
rupFail (3),
meaHwvm (4),
mea (5),
pwra (6),
pwrb (7),
rupMiss (8),
sbanr (9),
sdf (10),
thermal (11),
sdcardmiss (12),
sdcardfail (13),
mgmtrst (14),
progflt (15),
ntppu (16),
linkdown (17),
los (18),
lol (19),
lofOtu (20),
lomOtu (21),
timOtu (22),
bdiOtu (23),
bersdOtu (24),
aisOtu (25),
bersdOdu (26),
lckOdu (27),
ociOdu (28),
aisOdu (29),
bdiOdu (30),
timOdu (31),
plmOdu (32),
loomfi (33),
msim (34),
loflom (35),
csfOpu (36),
losync (37),
lf (38),
rf (39),
csfLosGfp (40),
csfLosyncGfp (41),
csfFdiGfp (42),
csfRdiGfp (43),
lofdGfp (44),
plmGfp (45),
lpbkfacility (46),
lpbkfterm (47),
contcom (48),
latchOpen (49),
lof (50),
aisL (51),
msAis (52),
timR (53),
rsTim (54),
rfiL (55),
msRfi (56),
cabs (99),
oog (100),
connectFail (101),
encryptFail (102),
keyexFail (103),
bdi (104),
bdiO (105),
autoshutoff (106),
fibrconnMiss (107),
bdiP (108),
losMsa (109),
protna (110),
switchThres (111),
losyncCd (112),
updatePskFail (113),
encTrafficSquelch (114),
optpwrDiffHigh (115),
ptFail (116),
ptDeg (117),
pskMismatch (118),
voatc (119),
spanDeg (120),
loa (121),
topoMism (122),
fipsSelftestFail (123),
losOpr (124),
degOpr (125),
horl (126),
autoshutoffDis (127),
olf (128),
swMism (129),
tSe (10001),
tDropevents (10002),
tOctets (10003),
tPkts (10004),
tBroadcastpkts (10005),
tMulticastpkts (10006),
tCrcalignerrors (10007),
tUndersizepkts (10008),
tOversizepkts (10009),
tFragments (10010),
tJabbers (10011),
tPkts64octets (10012),
tPkts65to127octets (10013),
tPkts128to255octets (10014),
tPkts256to511octets (10015),
tPkts512to1023octets (10016),
tPkts1024to1518octets (10017),
tUtilHt (10018),
tBeFec (10019),
tUbeFec (10020),
tBerFecHt (10021),
tEbOtu (10022),
tEsOtu (10023),
tSesOtu (10024),
tUasOtu (10025),
tEbOdu (10026),
tEsOdu (10027),
tSesOdu (10028),
tUasOdu (10029),
tDelayOduHt (10030),
tDelayOduLt (10031),
tDgdHt (10032),
tCdLt (10033),
tCdHt (10034),
tOsnrLt (10035),
tLoss (10036),
tOprHt (10037),
tOprLt (10038),
tQfactorLt (10039),
tOptHt (10040),
tOptLt (10041),
tPdlHt (10042),
tOftHt (10043),
tOftLt (10044),
tOfrHt (10045),
tOfrLt (10046),
tCvS (10047),
tEsS (10048),
tSesS (10049),
tUasS (10050),
tSefs (10051),
tBbeRs (10052),
tEsRs (10053),
tSesRs (10054),
tUasRs (10055),
tOfs (10056),
tOprLaneHt (10057),
tOprLaneLt (10058),
tOprTotalHt (10059),
tOprTotalLt (10060),
tOptLaneHt (10061),
tOptLaneLt (10062),
tOptTotalHt (10063),
tOptTotalLt (10064),
tLossTx (10065),
tLossRx (10066),
tPtfs (10067),
tOrlHt (10068),
tCvPcs (10069),
tEsPcs (10070),
tSesPcs (10071),
tUasPcs (10072),
tCbeFec (10073),
tFeb (10074),
tIae (10075),
tBiae (10076),
tBe (10077),
tPktserr (10078),
init (11001),
swupgCompld (11002),
swupgFail (11003),
swupgRollback (11004),
upgCompld (11005),
upgFail (11006),
intrusion (11007),
userlock (11008),
swupgIp (11009),
ztcFail (11010),
ztcComplete (11011),
dbactFail (11012),
inactive (11013),
restart (11014),
fstoprot (11015),
fstowkg (11016),
lockout (11017),
mantoprot (11018),
mantowkg (11019),
noreq (11020),
sdonprot (11021),
sdonwkg (11022),
sfonprot (11023),
sfonwkg (11024),
wkswpr (11025),
prswwk (11026),
wtr (11027),
dnr (11028),
authnFailed (11029),
loginFailed (11030),
candidatePskMismatch (11031),
updatePskCompld (11032),
candidatePskAuthenticated (11033),
updatePskReqRcv (11034),
pulloutTriggered (11035),
fipsSelftestPassed (11036),
fwCrash (11037),
powerArrayQuiteArea (11038)
}
CoriantFmtypesEntityTypeFm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
t10gbe (1),
t40gbe (2),
t100gbe (3),
ochOs (4),
otu4 (5),
otuc2 (6),
otuc3 (7),
oduc2 (8),
oduc3 (9),
odu4 (10),
odu3 (11),
odu2e (12),
odu2 (13),
shelf (14),
slot (15),
port (16),
fan (17),
chm1 (18),
chm2 (19),
bfm (20),
mgteth (21),
ntppeer (22),
db (23),
sw (24),
log (25),
security (26),
psu (27),
cfp2 (28),
qsfp (29),
time (30),
user (31),
ztc (32),
ppp (33),
fc8g (34),
fc16g (35),
oduflex (36),
otu2 (37),
otu2e (38),
oc192 (39),
stm64 (40),
oms (41),
gopt (42),
paoscofp2 (43),
pabaofp2 (44),
pairofp2 (45),
palrofp2 (46),
paerofp2 (47),
bahofp2 (48),
subslot (50),
occ2 (51),
omd96 (52),
amplifier (53),
omd48S (54),
omd48O (55),
chm1g (56),
tdcmofp2 (57),
bauofp2 (58),
paulrofp2 (59),
osc (60),
ots (61),
sfpplus (62),
xtm2 (63),
omd8b1ofp2 (64),
omd8b2ofp2 (65),
opsofp2 (66),
ops (67),
chm1lh (68),
chm2lh (69),
t10gwanSonet (70),
t10gwanSdh (71),
otdrofp2 (72),
ocmofp2 (73),
och (74),
otuc6 (75),
oduc6 (76),
otuc5 (77),
oduc5 (78),
otuc4 (79),
oduc4 (80),
chm2t (81),
opsptofp2 (82),
frcu (83),
cad8ofp2 (84),
cad8eofp2 (85),
omd64 (86),
t400gbe (87),
ws04sofp2 (88),
cad16aofp2 (89),
baxofp2 (90),
nmc (91),
t1gbe (92),
oc48 (93),
stm16 (94),
utm2 (95),
rd09sm (96),
omd48e (97),
otuc7 (99),
oduc7 (100),
otuc9 (101),
oduc9 (102),
otuc11 (103),
oduc11 (104),
odu0 (105),
odu1 (106),
dge2m2ofp2 (107),
pbmtpp (108),
cfp2Dco (109),
subport (110),
sfp (111),
ipsec (112)
}
CoriantFmtypesServiceAffectFm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
SA: service affecting
NSA: non-service affecting
"
SYNTAX INTEGER {
sa (1),
nsa (2)
}
CoriantFmtypesSeverityLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "
alarm severity
"
SYNTAX INTEGER {
notApplicable (0),
critical (1),
major (2),
minor (3),
notAlarmed (4),
notReported (5),
cleared (6)
}
CoriantPmtypesPmInstance ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX RowPointer
CoriantPmtypesPmParameter ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
all (0),
eb (1),
es (2),
ses (3),
uas (4),
delay (5),
delayMax (6),
delayMin (7),
dgd (8),
dgdMax (9),
dgdMin (10),
cd (11),
cdMax (12),
cdMin (13),
osnr (14),
osnrMax (15),
osnrMin (16),
qFactor (17),
qFactorMax (18),
qFactorMin (19),
opr (20),
oprMax (21),
oprMin (22),
loss (23),
se (24),
dropevents (25),
octets (26),
pkts (27),
broadcastpkts (28),
multicastpkts (29),
crcalignerrors (30),
undersizepkts (31),
oversizepkts (32),
fragments (33),
jabbers (34),
pkts64octets (35),
pkts65to127octets (36),
pkts128to255octets (37),
pkts256to511octets (38),
pkts512to1023octets (39),
pkts1024to1518octets (40),
utilization (41),
utilizationMax (42),
utilizationMin (43),
beFec (44),
ubeFec (45),
berFec (46),
berFecMax (47),
berFecMin (48),
opt (49),
optMax (50),
optMin (51),
pdl (52),
pdlMax (53),
pdlMin (54),
oft (55),
oftMax (56),
oftMin (57),
ofr (58),
ofrMax (59),
ofrMin (60),
bbe (61),
ofs (65),
cv (66),
sefs (67),
oprLaneHigh (68),
oprLaneHighMax (69),
oprLaneHighMin (70),
oprLaneLow (71),
oprLaneLowMax (72),
oprLaneLowMin (73),
oprTotal (74),
oprTotalMax (75),
oprTotalMin (76),
optLaneHigh (77),
optLaneHighMax (78),
optLaneHighMin (79),
optLaneLow (80),
optLaneLowMax (81),
optLaneLowMin (82),
optTotal (83),
optTotalMax (84),
optTotalMin (85),
tmodule (86),
tinlet (87),
toutlet (88),
tmoduleMax (89),
tmoduleMin (90),
tinletMax (91),
tinletMin (92),
toutletMax (93),
toutletMin (94),
berPostFec (95),
berPostFecMax (96),
berPostFecMin (97),
psd (98),
psc (99),
lossTx (100),
lossRx (101),
encryptionFailRx (102),
ptfs (103),
orl (104),
orlMax (105),
orlMin (106),
orlAvg (107),
delayAvg (108),
dgdAvg (109),
cdAvg (110),
osnrAvg (111),
qFactorAvg (112),
oprAvg (113),
optAvg (114),
berFecAvg (115),
berPostFecAvg (116),
pdlAvg (117),
oftAvg (118),
ofrAvg (119),
oprLaneHighAvg (120),
oprLaneLowAvg (121),
oprTotalAvg (122),
optLaneHighAvg (123),
optLaneLowAvg (124),
optTotalAvg (125),
tmoduleAvg (126),
tinletAvg (127),
toutletAvg (128),
utilizationAvg (129),
delayFrame (130),
delayFrameMax (131),
delayFrameMin (132),
delayFrameAvg (133),
cbeFec (134),
feb (135),
iae (136),
biae (137),
be (138),
pktserr (139),
bber (140),
bberMax (141),
bberMin (142),
bberAvg (143),
sesr (144),
sesrMax (145),
sesrMin (146),
sesrAvg (147),
sop (148),
sopMax (149),
sopMin (150),
sopAvg (151)
}
CoriantPmtypesPmpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
oduNendEgress (1),
oduNendIngress (2),
otuNendIngress (3),
delayMeasurementOdu (4),
coherentOpticalInterface (5),
opticalPower (6),
loss (7),
ethernetNendIngress (8),
ethernetNendEgress (9),
fec (10),
fcNendIngress (11),
sonetSNendIngress (12),
sdhRsNendIngress (13),
sonetSNendEgress (14),
sdhRsNendEgress (15),
shelfTemperature (16),
equipmentTemperature (17),
opticalPowerLane (18),
protectionSwitch (19),
lossTxrx (20),
opticalPowerIngress (21),
opticalPowerEgress (22),
oduEncryption (23),
pilotTone (24),
lossTx (25),
returnLoss (26),
pcsNendIngress (27),
macNendIngress (28),
macNendEgress (29),
ethernetErrorIngress (30),
ethernetErrorEgress (31),
all (100)
}
CoriantPmtypesValidityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
complete (1),
partial (2),
notAvailable (3)
}
CoriantRpcConfigurableLedTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Types of LEDs that can be enabled/disabled by the user.
"
SYNTAX INTEGER {
ledTest (1),
locationLed (2)
}
CoriantTypesActualPsd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
UNITS:nW/GHz"
SYNTAX OCTET STRING
CoriantTypesCardType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
fan (11),
psu (12),
chm1 (13),
chm2 (14),
xtm2 (16),
chm1g (17),
chm1lh (18),
chm2lh (19),
utm2 (20),
occ2 (100),
omd96 (101),
paoscofp2 (102),
pabaofp2 (103),
pairofp2 (104),
palrofp2 (105),
paerofp2 (106),
bahofp2 (107),
omd48S (109),
omd48O (110),
tdcmofp2 (111),
bauofp2 (112),
paulrofp2 (113),
omd8b1ofp2 (114),
omd8b2ofp2 (115),
opsofp2 (116),
otdrofp2 (117),
ocmofp2 (118),
opsptofp2 (119),
chm2t (120),
frcu (121),
cad8ofp2 (122),
cad8eofp2 (123),
omd64 (124),
ws04sofp2 (125),
cad16aofp2 (126),
baxofp2 (127),
rd09sm (128),
omd48e (129),
dge2m2ofp2 (130),
pbmtpp (131),
virSim (200)
}
CoriantTypesCreationscope ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
systemCreated (0),
userCreated (1),
systemCreatedForUser (2)
}
CoriantTypesDBPrecision1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "dB for 0.1 precision
UNITS:dB"
SYNTAX OCTET STRING
CoriantTypesDBPrecision3 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Power ratio in dB.
UNITS:dB"
SYNTAX OCTET STRING
CoriantTypesDate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The type of date show the mm/dd/year. The date type does not allow negative years
"
SYNTAX OCTET STRING (SIZE (0|10))
CoriantTypesDecimalFract1 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
CoriantTypesDecimalFract2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
CoriantTypesDecimalFract3 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
CoriantTypesDuplexMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
na (0),
full (1),
half (2)
}
CoriantTypesEnableSwitch ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
CoriantTypesEquipmentType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
empty (0),
filled (1),
reserved (2),
unrecognized (3),
notApplicable (4),
fan (11),
psu (12),
chm1 (13),
chm2 (14),
bfm (15),
xtm2 (16),
chm1g (17),
chm1lh (18),
chm2lh (19),
utm2 (20),
qsfp (21),
cfp2 (22),
sfpplus (23),
sfp (24),
cfp2Dco (25),
occ2 (100),
omd96 (101),
paoscofp2 (102),
pabaofp2 (103),
pairofp2 (104),
palrofp2 (105),
paerofp2 (106),
bahofp2 (107),
omd48S (109),
omd48O (110),
tdcmofp2 (111),
bauofp2 (112),
paulrofp2 (113),
omd8b1ofp2 (114),
omd8b2ofp2 (115),
opsofp2 (116),
otdrofp2 (117),
ocmofp2 (118),
opsptofp2 (119),
chm2t (120),
frcu (121),
cad8ofp2 (122),
cad8eofp2 (123),
omd64 (124),
ws04sofp2 (125),
cad16aofp2 (126),
baxofp2 (127),
rd09sm (128),
omd48e (129),
dge2m2ofp2 (130),
pbmtpp (131),
virSim (200)
}
CoriantTypesEthFec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
enabled (1),
disabled (2),
auto (3)
}
CoriantTypesEthernetRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
UNITS:Mbit/s"
SYNTAX INTEGER {
na (0),
t10 (1),
t100 (2),
t1000 (3),
maxRate (4)
}
CoriantTypesFilename ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "String representing a filename
"
SYNTAX OCTET STRING (SIZE (1..128))
CoriantTypesFlowControl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
na (0),
off (1),
txRx (2),
tx (3),
rx (4)
}
CoriantTypesFreq ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Supported Frequency Range.
UNITS:MHz"
SYNTAX Unsigned32 (0|191250000..196111250)
CoriantTypesFreqGeneric ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Supported generic Frequency Range.
UNITS:MHz"
SYNTAX Unsigned32
CoriantTypesFreqRoadm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
CoriantTypesFtpPath ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Representation of a FTP/STPF/FTPS/SCP path 'ftp://user@hostname/directorypath/filename'
or an HTTP URL 'http://domain.com/filename'
"
SYNTAX OCTET STRING (SIZE (1..1024))
CoriantTypesGridOffsetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Channel frequency offset to standard grid.
UNITS:MHz"
SYNTAX INTEGER (-25000|0|25000)
CoriantTypesGridType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
fixed50g96ch (1),
fixed100g48ch (2),
fixed75g64ch (3),
flexible (4)
}
CoriantTypesManagementDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
ingress (1),
egress (2)
}
CoriantTypesManagementLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
nearEnd (1),
farEnd (2),
notApplicable (3)
}
CoriantTypesManagementTimePeriod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
t15min (1),
t24h (2),
all (4),
t1min (5),
t1h (6)
}
CoriantTypesNameIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (1..32))
CoriantTypesNodeIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Globally unique identifer for a device.
"
SYNTAX OCTET STRING (SIZE (7..63))
CoriantTypesNumberList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "List of numbers using ',' as separator and '..' to represent ranges.
Examples: '12' , '1..4' , '1,5,10..12,20'
"
SYNTAX OCTET STRING (SIZE (0..255))
CoriantTypesOduType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
unused (0),
odu0 (1),
odu1 (2),
odu2 (3),
odu2e (4),
odu3 (5),
odu3e (6),
odu4 (7),
oduflex (8),
oduc2 (9),
oduc3 (10),
oduc4 (11),
oduc5 (12),
oduc6 (13),
oduc7 (14),
oduc9 (16),
oduc11 (18)
}
CoriantTypesOnOff ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
on (1),
off (2)
}
CoriantTypesOpticalDB ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Optical Attribute value with Unit dB
UNITS:dB"
SYNTAX OCTET STRING
CoriantTypesOpticalPower ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Optical Power value in dBm
UNITS:dBm"
SYNTAX OCTET STRING
CoriantTypesOpticalPowerPrecision2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Power value in dBm.
UNITS:dBm"
SYNTAX OCTET STRING
CoriantTypesOtukFec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
sdfec15 (1),
sdfec25 (2),
g709 (3),
i4 (4),
i7 (5),
nofec (6),
staircase7 (7),
sdfec15nd (8),
sdfec27nd (9),
sdfec15nd2 (10),
transparent (11),
ufec7 (12)
}
CoriantTypesPassword ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Any ASCII values between 32 and 126 decimal
"
SYNTAX OCTET STRING (SIZE (1..128))
CoriantTypesPercentage ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
UNITS:%"
SYNTAX Unsigned32 (0..100)
CoriantTypesPercentagePrecision2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
UNITS:%"
SYNTAX OCTET STRING
CoriantTypesPluggableComplianceCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
unrecognized (0),
t400gbaseAoc (1),
t400gbaseDac (2),
t400gbaseSr4 (3),
t400gbaseDr4 (4),
t400gbaseFr4 (5),
t400gbaseLr4 (6),
t400gbaseEr4 (7),
t400gbaseSr8 (8),
t400gbaseLr8 (9),
t100gbaseAoc (10),
t100gbaseSr4 (11),
t100gbaseLr4 (12),
t100gbaseEr4 (13),
t100gbaseSr10 (14),
t100gCwdm4 (15),
t100gPsm4 (16),
t100gbaseAcc (17),
t100gbaseClr4 (18),
t100gbaseCr4 (19),
t100geDwdm2 (20),
t25gbaseCrS (21),
t25gbaseCrN (22),
t40gbaseCr4 (23),
t40gbaseSr4 (24),
t40gbaseLr4 (25),
t40gbaseAc (26),
t40gbaseEr4 (27),
t4x10gbaseSr (28),
t4x10gbaseLr (29),
t40gPsm4 (30),
t10gbaseT (31),
t10gbaseIr (32),
t10gbaseSr (33),
t10gbaseEr (34),
t10gbaseZr (35),
t10gbaseLr (36),
t10gbaseLrm (37),
t1000baseT (38),
t1000baseCx (39),
t1000baseLx (40),
t1000baseSx (41),
basePx (42),
baseBx10 (43),
t100baseFx (44),
t100baseLxLx10 (45),
p1i12d1 (46),
p1s12d2 (47),
p1l12d2 (48),
t100gClr4 (49),
t100gAoc (50),
t100gAcc (51),
t40gOtn (52),
oc3Sr (53),
oc3Sr1 (54),
oc3Ir1 (55),
oc3Ir2 (56),
oc3Lr1 (57),
oc3Lr2 (58),
oc3Lr3 (59),
oc12Sr (60),
oc12Sr1 (61),
oc12Ir1 (62),
oc12Ir2 (63),
oc12Lr1 (64),
oc12Lr2 (65),
oc12Lr3 (66),
oc48Sr (67),
oc48Sr1 (68),
oc48Ir1 (69),
oc48Ir2 (70),
oc48Lr1 (71),
oc48Lr2 (72),
oc48Lr3 (73),
oc48Lr (74),
oc48Ir (75),
oc192Sr (76),
oc192Sr1 (77),
fc16gV (78),
fc16gS (79),
fc16gI (80),
fc16gL (81),
fc16gM (82),
fc12gV (83),
fc12gS (84),
fc12gI (85),
fc12gL (86),
fc12gM (87),
fc8gV (88),
fc8gS (89),
fc8gI (90),
fc8gL (91),
fc8gM (92),
fc4gV (93),
fc4gS (94),
fc4gI (95),
fc4gL (96),
fc4gM (97),
fc2gV (98),
fc2gS (99),
fc2gI (100),
fc2gL (101),
fc2gM (102),
fc1gV (103),
fc1gS (104),
fc1gI (105),
fc1gL (106),
fc1gM (107),
t4xfc8g (108),
t4xfc16g (109),
t4xfc8gL (110),
t4xfc16gL (111),
t4xfc8gS (112),
t4xfc16gS (113),
flexirate200g (114),
lc (300),
copper (301),
mpo12 (302)
}
CoriantTypesPluggableFormFactor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Indicating the exact form factor of the pluggable.
"
SYNTAX INTEGER {
notApplicable (0),
unrecognized (1),
qsfpplus (2),
qsfp28 (3),
cfp2Aco (4),
sfpplus (5),
sfp (6),
xfp (7),
qsfpDd (8),
cfp2Dco (9)
}
CoriantTypesPluggableType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
nonPluggable (20),
qsfp (21),
cfp2 (22),
sfpplus (23),
sfp (24),
cfp2Dco (25)
}
CoriantTypesPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX Unsigned32
CoriantTypesPortMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
t10gbe (1),
t40gbe (2),
t100gbe (3),
subport (4),
qpsk100g (5),
t8qam300g (6),
t16qam200g (7),
fc16g (8),
fc8g (9),
otu4 (10),
otu2 (12),
otu2e (13),
oc192 (14),
stm64 (15),
ochosOtu2 (16),
ochosOtu2e (17),
t8qam200g (18),
t10gwanSonet (19),
t10gwanSdh (20),
t64qam600g (21),
t400gbe (22),
spqpsk100g (23),
spqpskQpsk100g (24),
qpsk200g (25),
sp16qam200g (26),
t32qam200g (27),
qpskSp16qam200g (28),
t16qam300g (29),
sp16qam300g (30),
t32qam300g (31),
t64qam300g (32),
sp16qam16qam300g (33),
t16qam400g (34),
t32qam400g (35),
t64qam400g (36),
t16qam32qam400g (37),
t32qam500g (38),
t64qam500g (39),
t32qam64qam500g (40),
otu4Transparent (41),
qpsk100gTransparent (42),
sp16qam16qam200g (43),
t32qam64qam600g (44),
t1gbe (45),
oc48 (46),
stm16 (47),
sp16qam300gC (48),
qpskSp16qam300gC (49),
t16qam32qam500gC (50),
t16qam500gC (51),
sp16qam500gC (52),
qpskSp16qam500gC (53),
t32qam64qam700gC (54),
t16qam700gC (55),
sp16qam16qam700gC (56),
t32qam900gC (57),
t16qam32qam900gC (58),
t32qam64qam1100gC (59),
spqpskQpsk200g (60),
qpskSp16qam300g (61),
sp16qam16qam400g (62),
t16qam32qam500g (63)
}
CoriantTypesPower ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Power consumption value in W(WAT)
UNITS:W"
SYNTAX OCTET STRING
CoriantTypesPsd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
UNITS:nW/GHz"
SYNTAX OCTET STRING
CoriantTypesRtpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type of the routing protocol.
"
SYNTAX INTEGER {
direct (1),
static (2),
ospfv2 (3),
ebgp (4)
}
CoriantTypesSessionId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..45))
CoriantTypesShelfId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX Unsigned32 (1..65535)
CoriantTypesSlotId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX Unsigned32
CoriantTypesSnmpString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (1..32))
CoriantTypesSourceProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
direct (1),
static (2),
ospfv2 (3),
bgp (4),
ipcp (5)
}
CoriantTypesSubslotId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX Unsigned32
CoriantTypesTemperature ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Temperature value in degree Celsius.
UNITS:Celsius"
SYNTAX OCTET STRING
CoriantTypesTemperaturePrecision3 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Temperature value in Celsius with 0.001 precision
UNITS:Celsius"
SYNTAX OCTET STRING
CoriantTypesTestSignalConfig ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
none (0),
rxtx (3)
}
CoriantTypesTestSignalType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
none (0),
prbs (1),
idle (3)
}
CoriantTypesTimMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
none (0),
sapi (1),
dapi (2),
oper (3),
sapiDapi (4),
sapiOper (5),
dapiOper (6),
sapiDapiOper (7)
}
CoriantTypesTimePeriod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Representation of a time period in 'hh:mm:ss'
"
SYNTAX OCTET STRING (SIZE (8))
CoriantTypesTtiType15 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..15))
CoriantTypesTtiType32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING (SIZE (0..32))
CoriantTypesTypeOfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notApplicable (0),
tx (2),
rx (3),
rxtx (4)
}
CoriantTypesUserName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "According with Linux user-name pattern
"
SYNTAX OCTET STRING (SIZE (1..32))
CoriantTypesYesNo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
yes (1),
no (2)
}
HmoNetworkingBridgePortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
discarding (0),
blocked (1),
learning (2),
forwarding (3),
unknown (4)
}
IanaAfnSafiAddressFamily ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This typedef is a YANG enumeration of IANA-registered address
family numbers (AFN).
"
SYNTAX INTEGER {
ipv4 (1),
ipv6 (2),
nsap (3),
hdlc (4),
bbn1822 (5),
all802 (6),
e163 (7),
e164 (8),
f69 (9),
x121 (10),
ipx (11),
appletalk (12),
decnetiv (13),
banyanvines (14),
e164withnsap (15),
dns (16),
distinguishedname (17),
asnumber (18),
xtpoveripv4 (19),
xtpoveripv6 (20),
xtpnativemodextp (21),
fibrechannelwwpn (22),
fibrechannelwwnn (23),
gwid (24),
l2vpn (25),
mplstpsectionendpointidentifier (26),
mplstplspendpointidentifier (27),
mplstppseudowireendpointidentifier (28),
eigrpcommonservicefamily (16384),
eigrpipv4servicefamily (16385),
eigrpipv6servicefamily (16386),
lispcanonicaladdressformat (16387),
bgpls (16388),
t48bitmac (16389),
t64bitmac (16390)
}
IanaAfnSafiSubsequentAddressFamily ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This typedef is a YANG enumeration of IANA-registered
subsequent address family identifiers (SAFI).
"
SYNTAX INTEGER {
nlriunicast (1),
nlrimulticast (2),
nlrimpls (4),
mcastvpn (5),
nlridynamicmspw (6),
encapsulation (7),
tunnel (64),
vpls (65),
bgpmdt (66),
bgp4over6 (67),
bgp6over4 (68),
l1vpnautodiscovery (69),
mplsvpn (128),
multicastbgpmplsvpn (129),
routetargetconstraints (132),
ipv4dissflow (133),
vpnv4dissflow (134),
vpnautodiscovery (140),
private241 (241),
private242 (242),
private243 (243),
private244 (244),
private245 (245),
private246 (246),
private247 (247),
private248 (248),
private249 (249),
private250 (250),
private251 (251),
private252 (252),
private253 (253),
private254 (254)
}
IetfBgpTypesBgpCommunityRegexpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for communities specified as regular
expression patterns
"
SYNTAX OCTET STRING
IetfBgpTypesBgpExtCommunityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for extended community attributes
"
SYNTAX OCTET STRING
IetfBgpTypesBgpOriginAttrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for standard BGP origin attribute
"
SYNTAX INTEGER {
igp (0),
egp (1),
incomplete (2)
}
IetfBgpTypesBgpSessionDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type to describe the direction of NLRI transmission
"
SYNTAX INTEGER {
inbound (0),
outbound (1)
}
IetfBgpTypesBgpStdCommunityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for standard community attributes
"
SYNTAX OCTET STRING
IetfBgpTypesBgpWellKnownCommunityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition for well-known IETF community attribute
values
"
SYNTAX OCTET STRING
IetfBgpTypesCommunityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "type describing variations of community attributes:
STANDARD: standard BGP community [rfc1997]
EXTENDED: extended BGP community [rfc4360]
BOTH: both standard and extended community
"
SYNTAX INTEGER {
standard (0),
extended (1),
both (2),
none (3)
}
IetfBgpTypesPeerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "labels a peer or peer group as explicitly internal or
external
"
SYNTAX INTEGER {
internal (0),
external (1)
}
IetfBgpTypesPercentage ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Integer indicating a percentage value
"
SYNTAX Unsigned32 (0..100)
IetfBgpTypesRemovePrivateAsOption ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "set of options for configuring how private AS path numbers
are removed from advertisements
"
SYNTAX OCTET STRING
IetfBgpTypesRrClusterIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "union type for route reflector cluster ids:
option 1: 4-byte number
option 2: IP address
"
SYNTAX OCTET STRING
IetfInetTypesAsNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The as-number type represents autonomous system numbers
which identify an Autonomous System (AS). An AS is a set
of routers under a single technical administration, using
an interior gateway protocol and common metrics to route
packets within the AS, and using an exterior gateway
protocol to route packets to other ASes. IANA maintains
the AS number space and has delegated large parts to the
regional registries.
Autonomous system numbers were originally limited to 16
bits. BGP extensions have enlarged the autonomous system
number space to 32 bits. This type therefore uses an uint32
base type without a range restriction in order to support
a larger autonomous system number space.
In the value set and its semantics, this type is equivalent
to the InetAutonomousSystemNumber textual convention of
the SMIv2.
"
SYNTAX Unsigned32
IetfInetTypesDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The domain-name type represents a DNS domain name. The
name SHOULD be fully qualified whenever possible.
Internet domain names are only loosely specified. Section
3.5 of RFC 1034 recommends a syntax (modified in Section
2.1 of RFC 1123). The pattern above is intended to allow
for current practice in domain name use, and some possible
future expansion. It is designed to hold various types of
domain names, including names used for A or AAAA records
(host names) and other records, such as SRV records. Note
that Internet host names have a stricter syntax (described
in RFC 952) than the DNS recommendations in RFCs 1034 and
1123, and that systems that want to store host names in
schema nodes using the domain-name type are recommended to
adhere to this stricter standard to ensure interoperability.
The encoding of DNS names in the DNS protocol is limited
to 255 characters. Since the encoding consists of labels
prefixed by a length bytes and there is a trailing NULL
byte, only 253 characters can appear in the textual dotted
notation.
The description clause of schema nodes using the domain-name
type MUST describe when and how these names are resolved to
IP addresses. Note that the resolution of a domain-name value
may require to query multiple DNS records (e.g., A for IPv4
and AAAA for IPv6). The order of the resolution process and
which DNS record takes precedence can either be defined
explicitly or may depend on the configuration of the
resolver.
Domain-name values use the US-ASCII encoding. Their canonical
format uses lowercase US-ASCII characters. Internationalized
domain names MUST be A-labels as per RFC 5890.
"
SYNTAX OCTET STRING (SIZE (1..253))
IetfInetTypesDscp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The dscp type represents a Differentiated Services Code Point
that may be used for marking packets in a traffic stream.
In the value set and its semantics, this type is equivalent
to the Dscp textual convention of the SMIv2.
"
SYNTAX Unsigned32 (0..63)
IetfInetTypesHost ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The host type represents either an IP address or a DNS
domain name.
"
SYNTAX OCTET STRING
IetfInetTypesIpAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ip-address type represents an IP address and is IP
version neutral. The format of the textual representation
implies the IP version. This type supports scoped addresses
by allowing zone identifiers in the address format.
"
SYNTAX OCTET STRING
IetfInetTypesIpAddressNoZone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ip-address-no-zone type represents an IP address and is
IP version neutral. The format of the textual representation
implies the IP version. This type does not support scoped
addresses since it does not allow zone identifiers in the
address format.
"
SYNTAX OCTET STRING
IetfInetTypesIpPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ip-prefix type represents an IP prefix and is IP
version neutral. The format of the textual representations
implies the IP version.
"
SYNTAX OCTET STRING
IetfInetTypesIpVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This value represents the version of the IP protocol.
In the value set and its semantics, this type is equivalent
to the InetVersion textual convention of the SMIv2.
"
SYNTAX INTEGER {
unknown (0),
ipv4 (1),
ipv6 (2)
}
IetfInetTypesIpv4Address ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ipv4-address type represents an IPv4 address in
dotted-quad notation. The IPv4 address may include a zone
index, separated by a % sign.
The zone index is used to disambiguate identical address
values. For link-local addresses, the zone index will
typically be the interface index number or the name of an
interface. If the zone index is not present, the default
zone of the device will be used.
The canonical format for the zone index is the numerical
format
"
SYNTAX OCTET STRING
IetfInetTypesIpv4AddressNoZone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 address without a zone index. This type, derived from
ipv4-address, may be used in situations where the zone is
known from the context and hence no zone index is needed.
"
SYNTAX OCTET STRING
IetfInetTypesIpv4Prefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ipv4-prefix type represents an IPv4 address prefix.
The prefix length is given by the number following the
slash character and must be less than or equal to 32.
A prefix length value of n corresponds to an IP address
mask that has n contiguous 1-bits from the most
significant bit (MSB) and all other bits set to 0.
The canonical format of an IPv4 prefix has all bits of
the IPv4 address set to zero that are not part of the
IPv4 prefix.
"
SYNTAX OCTET STRING
IetfInetTypesIpv6Address ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ipv6-address type represents an IPv6 address in full,
mixed, shortened, and shortened-mixed notation. The IPv6
address may include a zone index, separated by a % sign.
The zone index is used to disambiguate identical address
values. For link-local addresses, the zone index will
typically be the interface index number or the name of an
interface. If the zone index is not present, the default
zone of the device will be used.
The canonical format of IPv6 addresses uses the textual
representation defined in Section 4 of RFC 5952. The
canonical format for the zone index is the numerical
format as described in Section 11.2 of RFC 4007.
"
SYNTAX OCTET STRING
IetfInetTypesIpv6AddressNoZone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv6 address without a zone index. This type, derived from
ipv6-address, may be used in situations where the zone is
known from the context and hence no zone index is needed.
"
SYNTAX OCTET STRING
IetfInetTypesIpv6FlowLabel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ipv6-flow-label type represents the flow identifier or Flow
Label in an IPv6 packet header that may be used to
discriminate traffic flows.
In the value set and its semantics, this type is equivalent
to the IPv6FlowLabel textual convention of the SMIv2.
"
SYNTAX Unsigned32 (0..1048575)
IetfInetTypesIpv6Prefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The ipv6-prefix type represents an IPv6 address prefix.
The prefix length is given by the number following the
slash character and must be less than or equal to 128.
A prefix length value of n corresponds to an IP address
mask that has n contiguous 1-bits from the most
significant bit (MSB) and all other bits set to 0.
The IPv6 address should have all bits that do not belong
to the prefix set to zero.
The canonical format of an IPv6 prefix has all bits of
the IPv6 address set to zero that are not part of the
IPv6 prefix. Furthermore, the IPv6 address is represented
as defined in Section 4 of RFC 5952.
"
SYNTAX OCTET STRING
IetfInetTypesPortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The port-number type represents a 16-bit port number of an
Internet transport-layer protocol such as UDP, TCP, DCCP, or
SCTP. Port numbers are assigned by IANA. A current list of
all assignments is available from .
Note that the port number value zero is reserved by IANA. In
situations where the value zero does not make sense, it can
be excluded by subtyping the port-number type.
In the value set and its semantics, this type is equivalent
to the InetPortNumber textual convention of the SMIv2.
"
SYNTAX Unsigned32 (0..65535)
IetfInetTypesUri ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The uri type represents a Uniform Resource Identifier
(URI) as defined by STD 66.
Objects using the uri type MUST be in US-ASCII encoding,
and MUST be normalized as described by RFC 3986 Sections
6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary
percent-encoding is removed, and all case-insensitive
characters are set to lowercase except for hexadecimal
digits, which are normalized to uppercase as described in
Section 6.2.2.1.
The purpose of this normalization is to help provide
unique URIs. Note that this normalization is not
sufficient to provide uniqueness. Two URIs that are
textually distinct after this normalization may still be
equivalent.
Objects using the uri type may restrict the schemes that
they permit. For example, 'data:' and 'urn:' schemes
might not be appropriate.
A zero-length URI is not a valid URI. This can be used to
express 'URI absent' where required.
In the value set and its semantics, this type is equivalent
to the Uri SMIv2 textual convention defined in RFC 5017.
"
SYNTAX OCTET STRING
IetfInterfacesInterfaceRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type is used by data models that need to reference
configured interfaces.
"
SYNTAX OCTET STRING
IetfInterfacesInterfaceStateRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type is used by data models that need to reference
the operationally present interfaces.
"
SYNTAX OCTET STRING
IetfNetconfAcmAccessOperationsType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF Access Operation.
"
SYNTAX BITS {
create (0),
read (1),
update (2),
delete (3),
exec (4)
}
IetfNetconfAcmActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Action taken by the server when a particular
rule matches.
"
SYNTAX INTEGER {
permit (0),
deny (1)
}
IetfNetconfAcmGroupNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Name of administrative group to which
users can be assigned.
"
SYNTAX OCTET STRING (SIZE (1..65535))
IetfNetconfAcmMatchallStringType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The string containing a single asterisk '*' is used
to conceptually represent all possible values
for the particular leaf using this data type.
"
SYNTAX OCTET STRING
IetfNetconfAcmNodeInstanceIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Path expression used to represent a special
data node instance identifier string.
A node-instance-identifier value is an
unrestricted YANG instance-identifier expression.
All the same rules as an instance-identifier apply
except predicates for keys are optional. If a key
predicate is missing, then the node-instance-identifier
represents all possible server instances for that key.
This XPath expression is evaluated in the following context:
o The set of namespace declarations are those in scope on
the leaf element where this type is used.
o The set of variable bindings contains one variable,
'USER', which contains the name of the user of the current
session.
o The function library is the core function library, but
note that due to the syntax restrictions of an
instance-identifier, no functions are allowed.
o The context node is the root node in the data tree.
"
SYNTAX OCTET STRING
IetfNetconfAcmUserNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "General Purpose Username string.
"
SYNTAX OCTET STRING (SIZE (1..65535))
IetfNetconfEditOperationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF 'operation' attribute values
"
SYNTAX INTEGER {
merge (0),
replace (1),
create (2),
delete (3),
remove (4)
}
IetfNetconfErrorSeverityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF Error Severity
"
SYNTAX INTEGER {
error (0),
warning (1)
}
IetfNetconfErrorTagType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF Error Tag
"
SYNTAX INTEGER {
inUse (0),
invalidValue (1),
tooBig (2),
missingAttribute (3),
badAttribute (4),
unknownAttribute (5),
missingElement (6),
badElement (7),
unknownElement (8),
unknownNamespace (9),
accessDenied (10),
lockDenied (11),
resourceDenied (12),
rollbackFailed (13),
dataExists (14),
dataMissing (15),
operationNotSupported (16),
operationFailed (17),
partialOperation (18),
malformedMessage (19)
}
IetfNetconfSessionIdOrZeroType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF Session Id or Zero to indicate none
"
SYNTAX Unsigned32
IetfNetconfSessionIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NETCONF Session Id
"
SYNTAX Unsigned32 (1..4294967295)
IetfNetconfWithDefaultsWithDefaultsMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Possible modes to report default data.
"
SYNTAX INTEGER {
reportAll (0),
reportAllTagged (1),
trim (2),
explicit (3)
}
IetfYangTypesCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The counter32 type represents a non-negative integer
that monotonically increases until it reaches a
maximum value of 2^32-1 (4294967295 decimal), when it
wraps around and starts increasing again from zero.
Counters have no defined 'initial' value, and thus, a
single value of a counter has (in general) no information
content. Discontinuities in the monotonically increasing
value normally occur at re-initialization of the
management system, and at other times as specified in the
description of a schema node using this type. If such
other times can occur, for example, the creation of
a schema node of type counter32 at times other than
re-initialization, then a corresponding schema node
should be defined, with an appropriate type, to indicate
the last discontinuity.
The counter32 type should not be used for configuration
schema nodes. A default statement SHOULD NOT be used in
combination with the type counter32.
In the value set and its semantics, this type is equivalent
to the Counter32 type of the SMIv2.
"
SYNTAX Unsigned32
IetfYangTypesCounter64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The counter64 type represents a non-negative integer
that monotonically increases until it reaches a
maximum value of 2^64-1 (18446744073709551615 decimal),
when it wraps around and starts increasing again from zero.
Counters have no defined 'initial' value, and thus, a
single value of a counter has (in general) no information
content. Discontinuities in the monotonically increasing
value normally occur at re-initialization of the
management system, and at other times as specified in the
description of a schema node using this type. If such
other times can occur, for example, the creation of
a schema node of type counter64 at times other than
re-initialization, then a corresponding schema node
should be defined, with an appropriate type, to indicate
the last discontinuity.
The counter64 type should not be used for configuration
schema nodes. A default statement SHOULD NOT be used in
combination with the type counter64.
In the value set and its semantics, this type is equivalent
to the Counter64 type of the SMIv2.
"
SYNTAX OCTET STRING
IetfYangTypesDateAndTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The date-and-time type is a profile of the ISO 8601
standard for representation of dates and times using the
Gregorian calendar. The profile is defined by the
date-time production in Section 5.6 of RFC 3339.
The date-and-time type is compatible with the dateTime XML
schema type with the following notable exceptions:
(a) The date-and-time type does not allow negative years.
(b) The date-and-time time-offset -00:00 indicates an unknown
time zone (see RFC 3339) while -00:00 and +00:00 and Z
all represent the same time zone in dateTime.
(c) The canonical format (see below) of data-and-time values
differs from the canonical format used by the dateTime XML
schema type, which requires all times to be in UTC using
the time-offset 'Z'.
This type is not equivalent to the DateAndTime textual
convention of the SMIv2 since RFC 3339 uses a different
separator between full-date and full-time and provides
higher resolution of time-secfrac.
The canonical format for date-and-time values with a known time
zone uses a numeric time zone offset that is calculated using
the device's configured known offset to UTC time. A change of
the device's offset to UTC time will cause date-and-time values
to change accordingly. Such changes might happen periodically
in case a server follows automatically daylight saving time
(DST) time zone offset changes. The canonical format for
date-and-time values with an unknown time zone (usually
referring to the notion of local time) uses the time-offset
-00:00.
"
SYNTAX OCTET STRING
IetfYangTypesDottedQuad ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An unsigned 32-bit number expressed in the dotted-quad
notation, i.e., four octets written as decimal numbers
and separated with the '.' (full stop) character.
"
SYNTAX OCTET STRING
IetfYangTypesGauge32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The gauge32 type represents a non-negative integer, which
may increase or decrease, but shall never exceed a maximum
value, nor fall below a minimum value. The maximum value
cannot be greater than 2^32-1 (4294967295 decimal), and
the minimum value cannot be smaller than 0. The value of
a gauge32 has its maximum value whenever the information
being modeled is greater than or equal to its maximum
value, and has its minimum value whenever the information
being modeled is smaller than or equal to its minimum value.
If the information being modeled subsequently decreases
below (increases above) the maximum (minimum) value, the
gauge32 also decreases (increases).
In the value set and its semantics, this type is equivalent
to the Gauge32 type of the SMIv2.
"
SYNTAX Unsigned32
IetfYangTypesGauge64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The gauge64 type represents a non-negative integer, which
may increase or decrease, but shall never exceed a maximum
value, nor fall below a minimum value. The maximum value
cannot be greater than 2^64-1 (18446744073709551615), and
the minimum value cannot be smaller than 0. The value of
a gauge64 has its maximum value whenever the information
being modeled is greater than or equal to its maximum
value, and has its minimum value whenever the information
being modeled is smaller than or equal to its minimum value.
If the information being modeled subsequently decreases
below (increases above) the maximum (minimum) value, the
gauge64 also decreases (increases).
In the value set and its semantics, this type is equivalent
to the CounterBasedGauge64 SMIv2 textual convention defined
in RFC 2856
"
SYNTAX OCTET STRING
IetfYangTypesHexString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A hexadecimal string with octets represented as hex digits
separated by colons. The canonical representation uses
lowercase characters.
"
SYNTAX OCTET STRING
IetfYangTypesMacAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The mac-address type represents an IEEE 802 MAC address.
The canonical representation uses lowercase characters.
In the value set and its semantics, this type is equivalent
to the MacAddress textual convention of the SMIv2.
"
SYNTAX OCTET STRING
IetfYangTypesObjectIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The object-identifier type represents administratively
assigned names in a registration-hierarchical-name tree.
Values of this type are denoted as a sequence of numerical
non-negative sub-identifier values. Each sub-identifier
value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers
are separated by single dots and without any intermediate
whitespace.
The ASN.1 standard restricts the value space of the first
sub-identifier to 0, 1, or 2. Furthermore, the value space
of the second sub-identifier is restricted to the range
0 to 39 if the first sub-identifier is 0 or 1. Finally,
the ASN.1 standard requires that an object identifier
has always at least two sub-identifiers. The pattern
captures these restrictions.
Although the number of sub-identifiers is not limited,
module designers should realize that there may be
implementations that stick with the SMIv2 limit of 128
sub-identifiers.
This type is a superset of the SMIv2 OBJECT IDENTIFIER type
since it is not restricted to 128 sub-identifiers. Hence,
this type SHOULD NOT be used to represent the SMIv2 OBJECT
IDENTIFIER type; the object-identifier-128 type SHOULD be
used instead.
"
SYNTAX OCTET STRING
IetfYangTypesObjectIdentifier128 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type represents object-identifiers restricted to 128
sub-identifiers.
In the value set and its semantics, this type is equivalent
to the OBJECT IDENTIFIER type of the SMIv2.
"
SYNTAX OCTET STRING
IetfYangTypesPhysAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Represents media- or physical-level addresses represented
as a sequence octets, each octet represented by two hexadecimal
numbers. Octets are separated by colons. The canonical
representation uses lowercase characters.
In the value set and its semantics, this type is equivalent
to the PhysAddress textual convention of the SMIv2.
"
SYNTAX OCTET STRING
IetfYangTypesTimestamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The timestamp type represents the value of an associated
timeticks schema node at which a specific occurrence
happened. The specific occurrence must be defined in the
description of any schema node defined using this type. When
the specific occurrence occurred prior to the last time the
associated timeticks attribute was zero, then the timestamp
value is zero. Note that this requires all timestamp values
to be reset to zero when the value of the associated timeticks
attribute reaches 497+ days and wraps around to zero.
The associated timeticks schema node must be specified
in the description of any schema node using this type.
In the value set and its semantics, this type is equivalent
to the TimeStamp textual convention of the SMIv2.
"
SYNTAX Unsigned32
IetfYangTypesTimeticks ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The timeticks type represents a non-negative integer that
represents the time, modulo 2^32 (4294967296 decimal), in
hundredths of a second between two epochs. When a schema
node is defined that uses this type, the description of
the schema node identifies both of the reference epochs.
In the value set and its semantics, this type is equivalent
to the TimeTicks type of the SMIv2.
"
SYNTAX Unsigned32
IetfYangTypesUuid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A Universally Unique IDentifier in the string representation
defined in RFC 4122. The canonical representation uses
lowercase characters.
The following is an example of a UUID in string representation:
f81d4fae-7dec-11d0-a765-00a0c91e6bf6
"
SYNTAX OCTET STRING
IetfYangTypesXpath10 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type represents an XPATH 1.0 expression.
When a schema node is defined that uses this type, the
description of the schema node MUST specify the XPath
context in which the XPath expression is evaluated.
"
SYNTAX OCTET STRING
IetfYangTypesYangIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A YANG identifier string as defined by the 'identifier'
rule in Section 12 of RFC 6020. An identifier must
start with an alphabetic character or an underscore
followed by an arbitrary sequence of alphabetic or
numeric characters, underscores, hyphens, or dots.
A YANG identifier MUST NOT start with any possible
combination of the lowercase or uppercase character
sequence 'xml'.
"
SYNTAX OCTET STRING (SIZE (1..65535))
IetfYangTypesZeroBasedCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The zero-based-counter32 type represents a counter32
that has the defined 'initial' value zero.
A schema node of this type will be set to zero (0) on creation
and will thereafter increase monotonically until it reaches
a maximum value of 2^32-1 (4294967295 decimal), when it
wraps around and starts increasing again from zero.
Provided that an application discovers a new schema node
of this type within the minimum time to wrap, it can use the
'initial' value as a delta. It is important for a management
station to be aware of this minimum time and the actual time
between polls, and to discard data if the actual time is too
long or there is no defined minimum time.
In the value set and its semantics, this type is equivalent
to the ZeroBasedCounter32 textual convention of the SMIv2.
"
SYNTAX Unsigned32
IetfYangTypesZeroBasedCounter64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The zero-based-counter64 type represents a counter64 that
has the defined 'initial' value zero.
A schema node of this type will be set to zero (0) on creation
and will thereafter increase monotonically until it reaches
a maximum value of 2^64-1 (18446744073709551615 decimal),
when it wraps around and starts increasing again from zero.
Provided that an application discovers a new schema node
of this type within the minimum time to wrap, it can use the
'initial' value as a delta. It is important for a management
station to be aware of this minimum time and the actual time
between polls, and to discard data if the actual time is too
long or there is no defined minimum time.
In the value set and its semantics, this type is equivalent
to the ZeroBasedCounter64 textual convention of the SMIv2.
"
SYNTAX OCTET STRING
IpsecDhGroup ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "DH groups for IKE and IPsec SA rekey.
"
SYNTAX Unsigned32 (14..21)
IpsecEncryptionAlgorithmType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The encryption algorithm for IKEv2 and ESP. The first part of the encryption algorithm type is Encryption Algorithm Transform IDs of IKEv2 and the second part is the key length. e.g., AES_GCM_16_256 means ENCR_AES_GCM_16 with 256-bits key length.
"
SYNTAX INTEGER {
aesCbc128 (1),
aesCbc192 (2),
aesCbc256 (3),
aesCtr128 (4),
aesCtr192 (5),
aesCtr256 (6),
aesGcm16128 (7),
aesGcm16192 (8),
aesGcm16256 (9)
}
IpsecIntegrityAlgorithmType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The integrity algorithm for IPsec and IKEv2.
"
SYNTAX INTEGER {
sha2256 (1),
sha2384 (2),
sha2512 (3)
}
IpsecIpsecInnerProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "IPsec protection can be applied to specific IP
traffic and layer 4 traffic (TCP, UDP, SCTP, etc.)
or ANY protocol in the IP packet payload. We
specify the IP protocol number with an uint8 or
ANY defining an enumerate with value 256 to
indicate the protocol number.
"
SYNTAX OCTET STRING
KeySyncSessionCertificateRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "certificate to be referred to.
"
SYNTAX OCTET STRING
KeySyncSessionInterfaceRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Interface to be referred to.
"
SYNTAX OCTET STRING
LldpLldpSysCap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX BITS {
other (0),
repeater (1),
bridge (2),
wlanaccesspoint (3),
router (4),
telephone (5),
docsiscabledevice (6),
stationonly (7),
cvlancomponent (8),
svlancomponent (9),
twoportmacrelay (10)
}
NmcNmcPsd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
OpenconfigAaaTypesCryptPasswordType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A password that is hashed based on the hash algorithm
indicated by the prefix in the string. The string
takes the following form, based on the Unix crypt function:
$[$=(,=)*][$[$]]
Common hash functions include:
id | hash function
---+---------------
1 | MD5
2a| Blowfish
2y| Blowfish (correct handling of 8-bit chars)
5 | SHA-256
6 | SHA-512
These may not all be supported by a target device.
"
SYNTAX OCTET STRING
OpenconfigIfAggregateAggregationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type to define the lag-type, i.e., how the LAG is
defined and managed
"
SYNTAX INTEGER {
lacp (0),
static (1)
}
OpenconfigIfIpIpAddressOrigin ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The origin of an address.
"
SYNTAX INTEGER {
other (0),
static (1),
dhcp (2),
linkLayer (3),
random (4)
}
OpenconfigIfIpNeighborOrigin ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The origin of a neighbor entry.
"
SYNTAX INTEGER {
other (0),
static (1),
dynamic (2)
}
OpenconfigInetTypesAsNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A numeric identifier for an autonomous system (AS). An AS is a
single domain, under common administrative control, which forms
a unit of routing policy. Autonomous systems can be assigned a
2-byte identifier, or a 4-byte identifier which may have public
or private scope. Private ASNs are assigned from dedicated
ranges. Public ASNs are assigned from ranges allocated by IANA
to the regional internet registries (RIRs).
"
SYNTAX Unsigned32
OpenconfigInetTypesDomainName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The domain-name type represents a DNS domain name.
Fully quallified left to the models which utilize this type.
Internet domain names are only loosely specified. Section
3.5 of RFC 1034 recommends a syntax (modified in Section
2.1 of RFC 1123). The pattern above is intended to allow
for current practice in domain name use, and some possible
future expansion. It is designed to hold various types of
domain names, including names used for A or AAAA records
(host names) and other records, such as SRV records. Note
that Internet host names have a stricter syntax (described
in RFC 952) than the DNS recommendations in RFCs 1034 and
1123, and that systems that want to store host names in
schema nodes using the domain-name type are recommended to
adhere to this stricter standard to ensure interoperability.
The encoding of DNS names in the DNS protocol is limited
to 255 characters. Since the encoding consists of labels
prefixed by a length bytes and there is a trailing NULL
byte, only 253 characters can appear in the textual dotted
notation.
Domain-name values use the US-ASCII encoding. Their canonical
format uses lowercase US-ASCII characters. Internationalized
domain names MUST be encoded in punycode as described in RFC
3492
"
SYNTAX OCTET STRING (SIZE (1..253))
OpenconfigInetTypesDscp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A differentiated services code point (DSCP) marking within the
IP header.
"
SYNTAX Unsigned32 (0..63)
OpenconfigInetTypesHost ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The host type represents either an unzoned IP address or a DNS
domain name.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 or IPv6 address with no prefix specified.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 or IPv6 prefix.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This value represents the version of the IP protocol.
Note that integer representation of the enumerated values
are not specified, and are not required to follow the
InetVersion textual convention in SMIv2.
"
SYNTAX INTEGER {
unknown (0),
ipv4 (4),
ipv6 (6)
}
OpenconfigInetTypesIpv4Address ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 address in dotted quad notation using the default
zone.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpv4AddressZoned ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 address in dotted quad notation. This type allows
specification of a zone index to disambiguate identical
address values. For link-local addresses, the index is
typically the interface index or interface name.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpv4Prefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv4 prefix represented in dotted quad notation followed by
a slash and a CIDR mask (0 <= mask <= 32).
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpv6Address ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv6 address represented as either a full address; shortened
or mixed-shortened formats, using the default zone.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpv6AddressZoned ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv6 address represented as either a full address; shortened
or mixed-shortened formats. This type allows specification of
a zone index to disambiguate identical address values. For
link-local addresses, the index is typically the interface
index or interface name.
"
SYNTAX OCTET STRING
OpenconfigInetTypesIpv6FlowLabel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The IPv6 flow-label is a 20-bit value within the IPv6 header
which is optionally used by the source of the IPv6 packet to
label sets of packets for which special handling may be
required.
"
SYNTAX Unsigned32 (0..1048575)
OpenconfigInetTypesIpv6Prefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IPv6 prefix represented in full, shortened, or mixed
shortened format followed by a slash and CIDR mask
(0 <= mask <= 128).
"
SYNTAX OCTET STRING
OpenconfigInetTypesPortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 16-bit port number used by a transport protocol such as TCP
or UDP.
"
SYNTAX Unsigned32
OpenconfigInetTypesUri ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An ASCII-encoded Uniform Resource Identifier (URI) as defined
in RFC 3986.
"
SYNTAX OCTET STRING
OpenconfigInetTypesUrl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An ASCII-encoded Uniform Resource Locator (URL) as defined
in RFC 3986, section 1.1.3
"
SYNTAX OCTET STRING
OpenconfigInterfacesBaseInterfaceRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Reusable type for by-name reference to a base interface.
This type may be used in cases where ability to reference
a subinterface is not required.
"
SYNTAX OCTET STRING
OpenconfigInterfacesInterfaceId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "User-defined identifier for an interface, generally used to
name a interface reference. The id can be arbitrary but a
useful convention is to use a combination of base interface
name and subinterface index.
"
SYNTAX OCTET STRING
OpenconfigLldpTypesChassisIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition with enumerations describing the source of
the chassis identifier
"
SYNTAX INTEGER {
chassisComponent (0),
interfaceAlias (1),
portComponent (2),
macAddress (3),
networkAddress (4),
interfaceName (5),
local (6)
}
OpenconfigLldpTypesPortIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition with enumerations describing the basis of
the port identifier
"
SYNTAX INTEGER {
interfaceAlias (0),
portComponent (1),
macAddress (2),
networkAddress (3),
interfaceName (4),
agentCircuitId (5),
local (6)
}
OpenconfigPlatformTypesComponentPowerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A generic type reflecting whether a hardware component
is powered on or off
"
SYNTAX INTEGER {
powerEnabled (0),
powerDisabled (1)
}
OpenconfigSystemLoggingSyslogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Syslog message severities
"
SYNTAX INTEGER {
emergency (0),
alert (1),
critical (2),
error (3),
warning (4),
notice (5),
informational (6),
debug (7)
}
OpenconfigSystemTimezoneNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A time zone name as used by the Time Zone Database,
sometimes referred to as the 'Olson Database'.
The exact set of valid values is an implementation-specific
matter. Client discovery of the exact set of time zone names
for a particular server is out of scope.
"
SYNTAX OCTET STRING
OpenconfigTransportTypesAdminStateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Administrative state modes for
logical channels in the transponder model.
"
SYNTAX INTEGER {
enabled (0),
disabled (1),
maint (2)
}
OpenconfigTransportTypesFrequencyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type for optical spectrum frequency values
UNITS:MHz"
SYNTAX OCTET STRING
OpenconfigTransportTypesLoopbackModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Loopback modes for transponder logical channels
"
SYNTAX INTEGER {
none (0),
facility (1),
terminal (2)
}
OpenconfigTypesIeeefloat32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IEEE 32-bit floating point number. The format of this number
is of the form:
1-bit sign
8-bit exponent
23-bit fraction
The floating point value is calculated using:
(-1)**S * 2**(Exponent-127) * (1+Fraction)
"
SYNTAX OCTET STRING
OpenconfigTypesPercentage ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Integer indicating a percentage value
"
SYNTAX Unsigned32 (0..100)
OpenconfigTypesRoutingPassword ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type is indicative of a password that is used within
a routing protocol which can be returned in plain text to the
NMS by the local system. Such passwords are typically stored
as encrypted strings. Since the encryption used is generally
well known, it is possible to extract the original value from
the string - and hence this format is not considered secure.
Leaves specified with this type should not be modified by
the system, and should be returned to the end-user in plain
text. This type exists to differentiate passwords, which
may be sensitive, from other string leaves. It could, for
example, be used by the NMS to censor this data when
viewed by particular users.
"
SYNTAX OCTET STRING
OpenconfigTypesStatInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A time interval over which a set of statistics is computed.
A common usage is to report the interval over which
avg/min/max stats are computed and reported.
UNITS:nanoseconds"
SYNTAX OCTET STRING
OpenconfigTypesStdRegexp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type definition is a placeholder for a standard
definition of a regular expression that can be utilised in
OpenConfig models. Further discussion is required to
consider the type of regular expressions that are to be
supported. An initial proposal is POSIX compatible.
"
SYNTAX OCTET STRING
OpenconfigTypesTimeticks64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "This type is based on the timeticks type defined in
RFC 6991, but with 64-bit width. It represents the time,
modulo 2^64, in hundredths of a second between two epochs.
"
SYNTAX OCTET STRING
OpenconfigVlanTypesQinqId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition representing a single double-tagged/QinQ VLAN
identifier. The format of a QinQ VLAN-ID is x.y where X is the
'outer' VLAN identifier, and y is the 'inner' VLAN identifier.
Both x and y must be valid VLAN IDs (1 <= vlan-id <= 4094)
with the exception that y may be equal to a wildcard (*). In
cases where y is set to the wildcard, this represents all inner
VLAN identifiers where the outer VLAN identifier is equal to
x
"
SYNTAX OCTET STRING
OpenconfigVlanTypesQinqIdRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A type definition representing a range of double-tagged/QinQ
VLAN identifiers. The format of a QinQ VLAN-ID range can be
specified in three formats. Where the range is outer VLAN IDs
the range is specified as x..y.z. In this case outer VLAN
identifiers meeting the criteria x <= outer-vlan-id <= y are
accepted iff the inner VLAN-ID is equal to y - or any inner-tag
if the wildcard is specified. Alternatively the range can be
specified as x.y..z. In this case only VLANs with an
outer-vlan-id qual to x are accepted (x may again be the
wildcard). Inner VLANs are accepted if they meet the inequality
y <= inner-vlan-id <= z.
"
SYNTAX OCTET STRING
OpenconfigVlanTypesVlanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition representing a single-tagged VLAN
"
SYNTAX Unsigned32 (1..4094)
OpenconfigVlanTypesVlanModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "VLAN interface mode (trunk or access)
"
SYNTAX INTEGER {
access (0),
trunk (1)
}
OpenconfigVlanTypesVlanRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type definition representing a range of single-tagged
VLANs. A range is specified as x..y where x and y are
valid VLAN IDs (1 <= vlan-id <= 4094). The range is
assumed to be inclusive, such that any VLAN-ID matching
x <= VLAN-ID <= y falls within the range.
"
SYNTAX OCTET STRING
OpenconfigVlanTypesVlanRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Reference to a VLAN by name or id
"
SYNTAX OCTET STRING
OpenconfigYangTypesCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 32-bit counter. A counter value is a monotonically increasing
value which is used to express a count of a number of
occurrences of a particular event or entity. When the counter
reaches its maximum value, in this case 2^32-1, it wraps to 0.
Discontinuities in the counter are generally triggered only when
the counter is reset to zero.
"
SYNTAX Unsigned32
OpenconfigYangTypesCounter64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A 64-bit counter. A counter value is a monotonically increasing
value which is used to express a count of a number of
occurrences of a particular event or entity. When a counter64
reaches its maximum value, 2^64-1, it loops to zero.
Discontinuities in a counter are generally triggered only when
the counter is reset to zero, through operator or system
intervention.
"
SYNTAX OCTET STRING
OpenconfigYangTypesDate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A full UTC date, expressed in the format described in RFC3339.
That is to say:
YYYY-MM-DD
where YYYY is the year, MM is the month expressed as a two-digit
month (zero padding if required), DD is the day of the month,
expressed as a two digit value.
"
SYNTAX OCTET STRING
OpenconfigYangTypesDateAndTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A date and time, expressed in the format described in RFC3339.
That is to say:
YYYY-MM-DDTHH:MM:SSZ+-hh:mm
where YYYY is the year, MM is the month expressed as a two-digit
month (zero padding if required), DD is the day of the month,
expressed as a two digit value. T is the literal character 'T',
HH is the hour of the day expressed as a two digit number, using
the 24-hour clock, MM is the minute of the hour expressed as a
two digit number. Z is the literal character 'Z', followed by a
timezone offset expressed in hours (hh) and minutes (mm), both
expressed as two digit numbers. The time offset is specified as
a positive or negative offset to UTC using the '+' or '-'
character preceding the offset.
Optionally, fractional seconds can be expressed after the minute
of the hour as a decimal number of unspecified precision
reflecting fractions of a second.
"
SYNTAX OCTET STRING
OpenconfigYangTypesDottedQuad ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An unsigned 32-bit integer expressed as a dotted quad. The
format is four octets written as decimal numbers separated
with a period character.
"
SYNTAX OCTET STRING
OpenconfigYangTypesGauge64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A gauge value may increase or decrease - and reflects a value
at a particular point in time. If the value of the variable
being modeled using the gauge exceeds its maximum - 2^64-1 in
this case - the gauge is set to its maximum value.
"
SYNTAX OCTET STRING
OpenconfigYangTypesHexString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A string consisting of a hexadecimal characters.
"
SYNTAX OCTET STRING
OpenconfigYangTypesMacAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "An IEEE 802 MAC address
"
SYNTAX OCTET STRING
OpenconfigYangTypesPhysAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A physical layer address, expressed as a series of pairs of
hexadecimal digits.
"
SYNTAX OCTET STRING
OpenroadmAugmentActivateNotificationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type of notification on software or database activation events
"
SYNTAX INTEGER {
activate (1),
commit (2),
cancel (3)
}
OpenroadmAugmentInterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
if100ge (0),
ifOms (1),
ifOts (2),
ifOch (3),
if1ge (4),
if10ge (5),
if40ge (6),
ifOchOtu1Odu1 (7),
ifOchOtu2Odu2 (8),
ifOchOtu2eOdu2e (9),
ifOchOtu3Odu3 (10),
ifOchOtu4Odu4 (11),
ifOtu4Odu4 (12),
ifOtu1Odu1 (13),
ifOtu2Odu2 (14),
ifOtu2eOdu2e (15),
ifOtu3Odu3 (16),
if1geOdu0 (17),
if10geOdu2 (18),
if10geOdu2e (19),
if40geOdu3 (20),
if100geOdu4 (21)
}
OpenroadmAugmentPmNamesEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
vendorextension (1),
biterrorrate (2),
opticalpoweroutput (3),
opticalreturnloss (4),
opticalpowerinput (5),
codeviolations (8),
erroredseconds (9),
severelyerroredseconds (10),
unavailableseconds (11),
inframes (12),
inframeserrored (13),
outframes (14),
erroredsecondsethernet (15),
severelyerroredsecondsethernet (16),
unavailablesecondsethernet (17),
erroredblockcount (18),
delay (19),
defectseconds (20),
backwardincomingalignmenterror (21),
incomingalignmenterror (22),
opticalpoweroutputmin (23),
opticalpoweroutputmax (24),
opticalpoweroutputavg (25),
opticalpowerinputmin (26),
opticalpowerinputmax (27),
opticalpowerinputavg (28),
opticalpoweroutputosc (29),
opticalpoweroutputoscmin (30),
opticalpoweroutputoscmax (31),
opticalpoweroutputoscavg (32),
opticalpowerinputosc (33),
opticalpowerinputoscmin (34),
opticalpowerinputoscmax (35),
opticalpowerinputoscavg (36),
prefeccorrectederrors (37),
totalopticalpowerinput (38),
totalopticalpowerinputmin (39),
totalopticalpowerinputmax (40),
totalopticalpowerinputavg (41),
feccorrectableblocks (42),
fecuncorrectableblocks (43),
biperrorcounter (56),
protectionswitchingcount (57),
protectionswitchingduration (58),
erroredblockcounttcm1Up (59),
erroredblockcounttcm2Up (60),
erroredblockcounttcm3Up (61),
erroredblockcounttcm4Up (62),
erroredblockcounttcm5Up (63),
erroredblockcounttcm6Up (64),
delaytcm1Up (65),
delaytcm2Up (66),
delaytcm3Up (67),
delaytcm4Up (68),
delaytcm5Up (69),
delaytcm6Up (70),
erroredblockcounttcm1Down (71),
erroredblockcounttcm2Down (72),
erroredblockcounttcm3Down (73),
erroredblockcounttcm4Down (74),
erroredblockcounttcm5Down (75),
erroredblockcounttcm6Down (76),
delaytcm1Down (77),
delaytcm2Down (78),
delaytcm3Down (79),
delaytcm4Down (80),
delaytcm5Down (81),
delaytcm6Down (82)
}
OpenroadmAugmentResourceNotificationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type of notification about a resource
"
SYNTAX INTEGER {
resourcecreation (1),
resourcemodification (2),
resourcedeletion (3)
}
OpenroadmAugmentResourceTypeEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
other (1),
device (2),
degree (3),
sharedRiskGroup (4),
connection (5),
connectionMap (6),
port (7),
circuitPack (8),
internalLink (9),
physicalLink (10),
interface (11),
shelf (12),
service (13),
oduSncpPg (14),
lineAmplifier (15),
xponder (16),
versionedService (17),
tempService (18)
}
OpenroadmAugmentStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
reservedForFacilityPlanned (1),
notReservedPlanned (2),
reservedForMaintenancePlanned (3),
reservedForFacilityUnvalidated (4),
notReservedUnvalidated (5),
unknownUnvalidated (6),
reservedForMaintenanceUnvalidated (7),
reservedForFacilityAvailable (8),
notReservedAvailable (9),
reservedForMaintenanceAvailable (10),
reservedForReversionInuse (11),
notReservedInuse (12),
reservedForMaintenanceInuse (13)
}
OpenroadmAugmentUsernameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The user name string identifying this entry.
"
SYNTAX OCTET STRING (SIZE (3..32))
OpticalCommonAttControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Attenuation control mode.
"
SYNTAX INTEGER {
notApplicable (0),
auto (1),
manual (2),
gainloss (3),
off (4),
power (5)
}
OpticalCommonChannelWorkingMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
noMonitor (0),
monitor (1),
powerControl (2)
}
OpticalCommonSupportingPort ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "References one individual port, or no port at all
"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesActivateNotificationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type of notification on software or database activation events
"
SYNTAX INTEGER {
activate (1),
commit (2),
cancel (3)
}
OrgOpenroadmCommonTypesAmplifierGainRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Operational mode for the amplifier:
this parameter allows modeling different operational modes (gain ranges) ,notably for switched-gain amplifiers.
It indicates which performance model shall be used by the path feasibility engine.
For standard amplifier, or when performance evaluation is based on incremental noise, use gain-range-1.
When performance evaluation is based on advanced parameters, specify used gain-range (1 to 4).
Up to release 2.1, only gain-range-1 is to be used (default value)
"
SYNTAX INTEGER {
gainRange1 (1),
gainRange2 (2),
gainRange3 (3),
gainRange4 (4)
}
OrgOpenroadmCommonTypesAmplifierTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "identifier for amplifier type
1. standard for amplifier as defined initially in the ROADM MSA specifications
To be completed if/when additional amplifier types are required
"
SYNTAX INTEGER {
standard (1)
}
OrgOpenroadmCommonTypesDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
tx (1),
rx (2),
bidirectional (3),
notapplicable (4)
}
OrgOpenroadmCommonTypesEquipmentTypeEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
other (1),
powersupply (2),
shelfprocessor (3),
crossconnect (4),
fan (5),
accesspanel (6),
circuitpack (7)
}
OrgOpenroadmCommonTypesExtendedRpcStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "status of RPC
"
SYNTAX INTEGER {
successful (1),
failed (2),
inProgress (3)
}
OrgOpenroadmCommonTypesFiberPmd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Polarization Mode Dispersion expressed in ps/km(1/2).
UNITS:ps/(km[1/2])"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesFrequencyGHz ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Frequency value in GHz.
UNITS:GHz"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesFrequencyTHz ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Frequency value in THz.
UNITS:THz"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesLifecycleState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Lifecycle state.
"
SYNTAX INTEGER {
deployed (1),
planned (2),
maintenance (3),
deploying (4),
undeploying (5),
undeployed (6),
proposed (7),
draft (8),
deployFailed (9),
undeployFailed (10)
}
OrgOpenroadmCommonTypesLineAmplifierControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Identifies the line amplifier control mode, either off or gain.
"
SYNTAX INTEGER {
gainloss (2),
off (3)
}
OrgOpenroadmCommonTypesLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
notapplicable (1),
nearend (2),
farend (3)
}
OrgOpenroadmCommonTypesModulationFormat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Modulation format
"
SYNTAX INTEGER {
bpsk (0),
dcDpBpsk (1),
qpsk (2),
dpQpsk (3),
qam16 (4),
dpQam16 (5),
dcDpQam16 (6),
qam8 (7),
dpQam8 (8),
dcDpQam8 (9)
}
OrgOpenroadmCommonTypesNodeIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Globally unique identifer for a device.
"
SYNTAX OCTET STRING (SIZE (7..63))
OrgOpenroadmCommonTypesNodeTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Identifier for node type
1. rdm for ROADM
2. xpdr for Transponder, Regen
3. ila for in-line amplifier
4. extplug for external plugable
"
SYNTAX INTEGER {
rdm (1),
xpdr (2),
ila (3),
extplug (4)
}
OrgOpenroadmCommonTypesOpenroadmVersionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "OpenROADM version enum type
"
SYNTAX INTEGER {
t10 (1),
t20 (2),
t21 (3),
t22 (4),
t221 (8)
}
OrgOpenroadmCommonTypesOpticTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
gray (1),
dwdm (2)
}
OrgOpenroadmCommonTypesOpticalControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Optical Control Mode: identifies specific algorithm related to power management and general optical control.
"
SYNTAX INTEGER {
power (1),
gainloss (2),
off (3)
}
OrgOpenroadmCommonTypesPortQual ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
roadmInternal (1),
roadmExternal (2),
xpdrNetwork (3),
xpdrClient (4),
otdr (5),
switchNetwork (6),
switchClient (7),
ilaExternal (8),
ilaInternal (9)
}
OrgOpenroadmCommonTypesPowerDBm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Power value in dBm.
UNITS:dBm"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesRatioDB ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Power ratio in dB.
UNITS:dB"
SYNTAX OCTET STRING
OrgOpenroadmCommonTypesRpcStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "status of RPC
"
SYNTAX INTEGER {
successful (1),
failed (2)
}
OrgOpenroadmCommonTypesSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Severity, based on X.733 perceived severity
"
SYNTAX INTEGER {
critical (1),
major (2),
minor (3),
warning (4),
clear (5),
indeterminate (6)
}
OrgOpenroadmCommonTypesState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "State that indicates whether the resource is able to provide fullfill its role - carry traffic, etc.
"
SYNTAX INTEGER {
inservice (1),
outofservice (2),
degraded (3)
}
OrgOpenroadmCommonTypesWavelengthDuplicationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "One per srg is applied to C/D add/drop group
one per degree is applied to C/D/C add drop group
"
SYNTAX INTEGER {
onePerSrg (1),
onePerDegree (2)
}
OrgOpenroadmCommonTypesXpdrNodeTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Identifier for Xponder node type
1. Transponder
2. Muxponder
3. OTN switchponder
4. Regenerator
5. Regenerator based on unidirectional model
"
SYNTAX INTEGER {
tpdr (1),
mpdr (2),
switch (3),
regen (4),
regenUni (5)
}
OrgOpenroadmEquipmentStatesTypesAdminStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
inservice (1),
outofservice (2),
maintenance (3)
}
OrgOpenroadmEquipmentStatesTypesStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
reservedForFacilityPlanned (1),
notReservedPlanned (2),
reservedForMaintenancePlanned (3),
reservedForFacilityUnvalidated (4),
notReservedUnvalidated (5),
unknownUnvalidated (6),
reservedForMaintenanceUnvalidated (7),
reservedForFacilityAvailable (8),
notReservedAvailable (9),
reservedForMaintenanceAvailable (10),
reservedForReversionInuse (11),
notReservedInuse (12),
reservedForMaintenanceInuse (13)
}
OrgOpenroadmLayerRateLayerRateEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
vendorextension (1),
layer2 (2),
layer3 (3),
layer4 (4),
layer5 (5),
layer6 (6)
}
OrgOpenroadmMaintenanceMaintenanceOperation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Maintenance Operation.
"
SYNTAX INTEGER {
terminalloopback (1),
facilityloopback (2),
testsignal (3)
}
OrgOpenroadmOtnCommonTypesPayloadTypeDef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Common type definition for odu payload-type
"
SYNTAX OCTET STRING (SIZE (2))
OrgOpenroadmPmTypesPmDataType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
OrgOpenroadmPmTypesPmGranularity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Granularity of PM bin
"
SYNTAX INTEGER {
notapplicable (1),
t15min (2),
t24hour (3)
}
OrgOpenroadmPmTypesPmNamesEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
vendorextension (1),
biterrorrate (2),
opticalpoweroutput (3),
opticalreturnloss (4),
opticalpowerinput (5),
codeviolations (8),
erroredseconds (9),
severelyerroredseconds (10),
unavailableseconds (11),
inframes (12),
inframeserrored (13),
outframes (14),
erroredsecondsethernet (15),
severelyerroredsecondsethernet (16),
unavailablesecondsethernet (17),
erroredblockcount (18),
delay (19),
defectseconds (20),
backwardincomingalignmenterror (21),
incomingalignmenterror (22),
opticalpoweroutputmin (23),
opticalpoweroutputmax (24),
opticalpoweroutputavg (25),
opticalpowerinputmin (26),
opticalpowerinputmax (27),
opticalpowerinputavg (28),
opticalpoweroutputosc (29),
opticalpoweroutputoscmin (30),
opticalpoweroutputoscmax (31),
opticalpoweroutputoscavg (32),
opticalpowerinputosc (33),
opticalpowerinputoscmin (34),
opticalpowerinputoscmax (35),
opticalpowerinputoscavg (36),
prefeccorrectederrors (37),
totalopticalpowerinput (38),
totalopticalpowerinputmin (39),
totalopticalpowerinputmax (40),
totalopticalpowerinputavg (41),
feccorrectableblocks (42),
fecuncorrectableblocks (43),
biperrorcounter (56),
protectionswitchingcount (57),
protectionswitchingduration (58),
erroredblockcounttcm1Up (59),
erroredblockcounttcm2Up (60),
erroredblockcounttcm3Up (61),
erroredblockcounttcm4Up (62),
erroredblockcounttcm5Up (63),
erroredblockcounttcm6Up (64),
delaytcm1Up (65),
delaytcm2Up (66),
delaytcm3Up (67),
delaytcm4Up (68),
delaytcm5Up (69),
delaytcm6Up (70),
erroredblockcounttcm1Down (71),
erroredblockcounttcm2Down (72),
erroredblockcounttcm3Down (73),
erroredblockcounttcm4Down (74),
erroredblockcounttcm5Down (75),
erroredblockcounttcm6Down (76),
delaytcm1Down (77),
delaytcm2Down (78),
delaytcm3Down (79),
delaytcm4Down (80),
delaytcm5Down (81),
delaytcm6Down (82)
}
OrgOpenroadmPmTypesValidity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Validity of data
"
SYNTAX INTEGER {
complete (1),
partial (2),
suspect (3)
}
OrgOpenroadmPortCapabilityTcmDirectionCapabilityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "TCM direction capability for the port
"
SYNTAX INTEGER {
upTcm (0),
downTcm (1),
upDownTcm (2)
}
OrgOpenroadmPortTypesPortWavelengthTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Port types.
"
SYNTAX INTEGER {
wavelength (1),
multiWavelength (2)
}
OrgOpenroadmProbableCauseProbableCauseEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
vendorextension (1),
openconnectionindication (2),
alarmindicationsignal (3),
lossofsignal (4),
opticallinefail (5),
opticalpowerdegraded (6),
automaticlasershutdown (7),
serversignalfail (8),
lockeddefect (10),
trailtraceidentifiermismatch (11),
degradeddefect (12),
backwardsdefectindication (13),
otsspanlosspoweroutofspecificationhigh (14),
automaticshutoffdisabled (15),
portlossoflight (17),
reflectiontoohigh (18),
payloadmissingindication (22),
forwarddefectindication (23),
oscpoweroutofspecificationhigh (24),
oscpoweroutofspecificationlow (25),
poweroutofspecificationhigh (26),
lossofsynchronization (27),
linkdown (28),
equipmentfault (29),
equipmentremoved (30),
equipmentmismatch (31),
equipmentwarmup (32),
equipmentledon (33),
equipmentinterconnectfailure (34),
equipmentmiscabledconnection (35),
softwareversionmismatch (36),
softwarestageinprogress (37),
databasecorruption (38),
databaseversionmismatch (44),
firmwareversionmismatch (46),
incompatiblefirmware (49),
firmwaredownloadoractivationfailure (50),
firmwareinitinprogress (51),
softwarereset (52),
fancoolingfail (53),
administrativedown (54),
lamptest (55),
powerproblema (56),
powerproblemb (57),
shelfprovisioningmode (58),
sysnamechanged (59),
sysntpnotsynchronized (60),
lossofframe (63),
lossofmultiframe (64),
backwardincomingalignmenterror (65),
incomingalignmenterror (66),
payloadmismatch (67),
clientsignalfaildefect (68),
highber (123),
localfault (124),
remotefault (125),
lossofalignment (126),
lossoffecalignment (127),
facilityloopbackactive (128),
facilityloopback2active (129),
terminalloopbackactive (130),
facilitytestsignalactive (131),
terminaltestsignalactive (132),
certificatenotinstalled (134),
lockoutofprotection (135),
forcedswitchawayfromworking (136),
forcedswitchawayfromprotect (137),
automaticswitchawayfromworkingduetosf (138),
automaticswitchawayfromprotectduetosf (139),
automaticswitchduetowtr (140),
manualswitchawayfromwork (141),
manualswitchawayfromprotect (142),
automaticpowerreduction (143),
lossofsignalosc (144),
softwarevalidateinprogress (145),
databaserollbacktimerinprogress (146),
otdrscaninprogress (147),
lldpfail (148),
omspoweroutofspecificationhigh (149),
omspoweroutofspecificationlow (150),
automaticswitchawayfromworkingduetosd (151),
automaticswitchawayfromprotectduetosd (152),
backwardincomingalignmenterrortcm1Up (153),
backwardincomingalignmenterrortcm2Up (154),
backwardincomingalignmenterrortcm3Up (155),
backwardincomingalignmenterrortcm4Up (156),
backwardincomingalignmenterrortcm5Up (157),
backwardincomingalignmenterrortcm6Up (158),
incomingalignmenterrortcm1Up (159),
incomingalignmenterrortcm2Up (160),
incomingalignmenterrortcm3Up (161),
incomingalignmenterrortcm4Up (162),
incomingalignmenterrortcm5Up (163),
incomingalignmenterrortcm6Up (164),
backwardsdefectindicationtcm1Up (165),
backwardsdefectindicationtcm2Up (166),
backwardsdefectindicationtcm3Up (167),
backwardsdefectindicationtcm4Up (168),
backwardsdefectindicationtcm5Up (169),
backwardsdefectindicationtcm6Up (170),
degradeddefecttcm1Up (171),
degradeddefecttcm2Up (172),
degradeddefecttcm3Up (173),
degradeddefecttcm4Up (174),
degradeddefecttcm5Up (175),
degradeddefecttcm6Up (176),
trailtraceidentifiermismatchtcm1Up (177),
trailtraceidentifiermismatchtcm2Up (178),
trailtraceidentifiermismatchtcm3Up (179),
trailtraceidentifiermismatchtcm4Up (180),
trailtraceidentifiermismatchtcm5Up (181),
trailtraceidentifiermismatchtcm6Up (182),
alarmindicationsignaltcm1Up (183),
alarmindicationsignaltcm2Up (184),
alarmindicationsignaltcm3Up (185),
alarmindicationsignaltcm4Up (186),
alarmindicationsignaltcm5Up (187),
alarmindicationsignaltcm6Up (188),
openconnectionindicationtcm1Up (189),
openconnectionindicationtcm2Up (190),
openconnectionindicationtcm3Up (191),
openconnectionindicationtcm4Up (192),
openconnectionindicationtcm5Up (193),
openconnectionindicationtcm6Up (194),
lockeddefecttcm1Up (195),
lockeddefecttcm2Up (196),
lockeddefecttcm3Up (197),
lockeddefecttcm4Up (198),
lockeddefecttcm5Up (199),
lockeddefecttcm6Up (200),
lossoftandemconnectiontcm1Up (201),
lossoftandemconnectiontcm2Up (202),
lossoftandemconnectiontcm3Up (203),
lossoftandemconnectiontcm4Up (204),
lossoftandemconnectiontcm5Up (205),
lossoftandemconnectiontcm6Up (206),
backwardincomingalignmenterrortcm1Down (207),
backwardincomingalignmenterrortcm2Down (208),
backwardincomingalignmenterrortcm3Down (209),
backwardincomingalignmenterrortcm4Down (210),
backwardincomingalignmenterrortcm5Down (211),
backwardincomingalignmenterrortcm6Down (212),
incomingalignmenterrortcm1Down (213),
incomingalignmenterrortcm2Down (214),
incomingalignmenterrortcm3Down (215),
incomingalignmenterrortcm4Down (216),
incomingalignmenterrortcm5Down (217),
incomingalignmenterrortcm6Down (218),
backwardsdefectindicationtcm1Down (219),
backwardsdefectindicationtcm2Down (220),
backwardsdefectindicationtcm3Down (221),
backwardsdefectindicationtcm4Down (222),
backwardsdefectindicationtcm5Down (223),
backwardsdefectindicationtcm6Down (224),
degradeddefecttcm1Down (225),
degradeddefecttcm2Down (226),
degradeddefecttcm3Down (227),
degradeddefecttcm4Down (228),
degradeddefecttcm5Down (229),
degradeddefecttcm6Down (230),
trailtraceidentifiermismatchtcm1Down (231),
trailtraceidentifiermismatchtcm2Down (232),
trailtraceidentifiermismatchtcm3Down (233),
trailtraceidentifiermismatchtcm4Down (234),
trailtraceidentifiermismatchtcm5Down (235),
trailtraceidentifiermismatchtcm6Down (236),
alarmindicationsignaltcm1Down (237),
alarmindicationsignaltcm2Down (238),
alarmindicationsignaltcm3Down (239),
alarmindicationsignaltcm4Down (240),
alarmindicationsignaltcm5Down (241),
alarmindicationsignaltcm6Down (242),
openconnectionindicationtcm1Down (243),
openconnectionindicationtcm2Down (244),
openconnectionindicationtcm3Down (245),
openconnectionindicationtcm4Down (246),
openconnectionindicationtcm5Down (247),
openconnectionindicationtcm6Down (248),
lockeddefecttcm1Down (249),
lockeddefecttcm2Down (250),
lockeddefecttcm3Down (251),
lockeddefecttcm4Down (252),
lockeddefecttcm5Down (253),
lockeddefecttcm6Down (254),
lossoftandemconnectiontcm1Down (255),
lossoftandemconnectiontcm2Down (256),
lossoftandemconnectiontcm3Down (257),
lossoftandemconnectiontcm4Down (258),
lossoftandemconnectiontcm5Down (259),
lossoftandemconnectiontcm6Down (260),
multiplexstructureidentifiermismatch (261),
lossofomfindication (262),
lossofframeandlossofmultiframe (263),
lossofdatabaseredundancy (264),
databaselocked (265),
createtechinfoinprogress (266),
circuitpackactivatefailed (267),
softwaresubsystemfailed (268),
diskfull (269)
}
OrgOpenroadmResourceTypesResourceNotificationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Type of notification about a resource
"
SYNTAX INTEGER {
resourcecreation (1),
resourcemodification (2),
resourcedeletion (3)
}
OrgOpenroadmResourceTypesResourceTypeEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
other (1),
device (2),
degree (3),
sharedRiskGroup (4),
connection (5),
connectionMap (6),
port (7),
circuitPack (8),
internalLink (9),
physicalLink (10),
interface (11),
shelf (12),
service (13),
oduSncpPg (14),
lineAmplifier (15),
xponder (16),
versionedService (17),
tempService (18)
}
OrgOpenroadmRstpBridgeIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Unique Bridge Identifier
"
SYNTAX OCTET STRING
OrgOpenroadmSwitchingPoolTypesSwitchingPoolTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
nonBlocking (1),
blocking (2)
}
OrgOpenroadmSyslogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The definitions for Syslog message severity as per RFC 5424.
Extended the RFC definition with enums for all and none
"
SYNTAX INTEGER {
emergency (0),
alert (1),
critical (2),
error (3),
warning (4),
notice (5),
info (6),
debug (7),
all (8),
none (9)
}
OrgOpenroadmUserMgmtPasswordType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The password for this entry. This shouldn't be in clear text
The Password must contain at least 2 characters from
each of the following groups:
a) Lower case alphabetic (a-z)
b) Upper case alphabetic (A-Z)
c) Numeric 0-9
d) Special characters Allowed !$%^()[]_-~{}.+
Password must not contain Username.
"
SYNTAX OCTET STRING (SIZE (8..128))
OrgOpenroadmUserMgmtUsernameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The user name string identifying this entry.
"
SYNTAX OCTET STRING (SIZE (3..32))
OtdrOtdrIor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
OtdrOtdrPulseWidth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
OtdrOtdrRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
QsfpSignalIntegrityControlVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX OCTET STRING
QsfpSignalIntegritySignalVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "NULL
"
SYNTAX INTEGER {
nA (0),
true (1),
false (2)
}
RstpBridgeIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Unique Bridge Identifier
"
SYNTAX OCTET STRING (SIZE (1..255))
SecurityGrpcCertificateRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "certificate to be referred to.
"
SYNTAX OCTET STRING
SecurityLocalCertificateRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "certificate to be referred to.
"
SYNTAX OCTET STRING
SecurityTrustedCertificateGroupRef ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "trusted-certificate-group to be referred to.
"
SYNTAX OCTET STRING
coriant OBJECT IDENTIFIER ::= { enterprises 42229 }
products OBJECT IDENTIFIER ::= { coriant 1 }
fault OBJECT IDENTIFIER ::= { groove 1 }
notificationInfo OBJECT IDENTIFIER ::= { fault 1 }
notificationObject OBJECT IDENTIFIER ::= { notificationInfo 1 }
notificationFmEntity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The management object instance which the alarm or condition is reported against.
"
::= { notificationObject 1 }
notificationConditionType OBJECT-TYPE
SYNTAX CoriantFmtypesConditionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the current standing conditions which cause alarms and/or events.
"
::= { notificationObject 2 }
notificationLocation OBJECT-TYPE
SYNTAX CoriantTypesManagementLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates if the alarm or event location is near end or far end.
"
::= { notificationObject 3 }
notificationDirection OBJECT-TYPE
SYNTAX CoriantTypesManagementDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
"
::= { notificationObject 4 }
notificationTimePeriod OBJECT-TYPE
SYNTAX CoriantTypesManagementTimePeriod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the time-period increments during which PM data is collected.
"
::= { notificationObject 5 }
notificationServiceAffect OBJECT-TYPE
SYNTAX CoriantFmtypesServiceAffectFm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates if an alarm is service affecting or non-service affecting.
NSA indicates non-service affecting.
SA indicates service affecting.
"
::= { notificationObject 6 }
notificationSeverityLevel OBJECT-TYPE
SYNTAX CoriantFmtypesSeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the notification code (severity level) associated with the alarm type of service affecting.
"
::= { notificationObject 7 }
notificationOccurrenceDateTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
"
::= { notificationObject 8 }
notificationConditionDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Describes the condition that caused the alarm.
"
::= { notificationObject 9 }
notificationAlarmConditionType OBJECT-TYPE
SYNTAX INTEGER {
standing (1),
transient (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm condition types, for example, standing or transient.
"
::= { notificationObject 10 }
notificationLastSeverityLevel OBJECT-TYPE
SYNTAX CoriantFmtypesSeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the last severity level associated with the alarm type,
which provides the info of alarm severity declared and cleared.
"
::= { notificationObject 11 }
notificationExtensionDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The description in alarm notification to provide additional information.
"
::= { notificationObject 12 }
notificationFmEntityType OBJECT-TYPE
SYNTAX CoriantFmtypesEntityTypeFm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition.
entity type is not exactly same as MO. Entity type have smaller granularity referring to
different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2...
Separate functions will have different entity types so that profile can be set differently for different
service function which is more corresponding to user application.
"
::= { notificationObject 13 }
notificationAlarmId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A system assigned unique identified to the alarm.
"
::= { notificationObject 14 }
notificationTrap OBJECT IDENTIFIER ::= { fault 2 }
alarmNotification NOTIFICATION-TYPE
OBJECTS { notificationFmEntity,notificationConditionType,notificationLocation,notificationDirection,notificationTimePeriod,notificationServiceAffect,notificationSeverityLevel,notificationOccurrenceDateTime,notificationConditionDescription,notificationFmEntityType,notificationAlarmConditionType,notificationLastSeverityLevel,notificationExtensionDescription,notificationAlarmId }
STATUS current
DESCRIPTION ""
::= { notificationTrap 1 }
notAlarmedEventNotification NOTIFICATION-TYPE
OBJECTS { notificationFmEntity,notificationConditionType,notificationLocation,notificationDirection,notificationTimePeriod,notificationServiceAffect,notificationSeverityLevel,notificationOccurrenceDateTime,notificationConditionDescription,notificationFmEntityType,notificationAlarmConditionType,notificationLastSeverityLevel,notificationExtensionDescription,notificationAlarmId }
STATUS current
DESCRIPTION ""
::= { notificationTrap 2 }
alarmProfile OBJECT IDENTIFIER ::= { fault 4 }
alarmProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Alarm profile defines the severity profile of alarm and event."
::= { alarmProfile 1 }
alarmProfileEntry OBJECT-TYPE
SYNTAX AlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of alarmProfileTable"
INDEX { alarmProfileId }
::= { alarmProfileTable 1 }
AlarmProfileEntry ::=
SEQUENCE {
alarmProfileId Unsigned32
}
alarmProfileId OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
alarm profile identifier which uniquely specify alarm profile.
alarm profile 1 is supported firstly and applicable to all entities implicitly.
"
::= { alarmProfileEntry 1 }
alarmProfileENTR OBJECT IDENTIFIER ::= { fault 5 }
alarmProfileENTRTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmProfileENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list includes alarm/event entries of an alarm-profile."
::= { alarmProfileENTR 1 }
alarmProfileENTREntry OBJECT-TYPE
SYNTAX AlarmProfileENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of alarmProfileENTRTable"
INDEX { alarmProfileId,alarmProfileENTRConditionType,alarmProfileENTRFmEntityType,alarmProfileENTRTimePeriod }
::= { alarmProfileENTRTable 1 }
AlarmProfileENTREntry ::=
SEQUENCE {
alarmProfileENTRConditionType CoriantFmtypesConditionType,
alarmProfileENTRFmEntityType CoriantFmtypesEntityTypeFm,
alarmProfileENTRTimePeriod CoriantTypesManagementTimePeriod,
alarmProfileENTRSeverityLevelSa CoriantFmtypesSeverityLevel,
alarmProfileENTRSeverityLevelNsa CoriantFmtypesSeverityLevel
}
alarmProfileENTRConditionType OBJECT-TYPE
SYNTAX CoriantFmtypesConditionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifies the current standing conditions which cause conditions and/or events.
"
::= { alarmProfileENTREntry 1 }
alarmProfileENTRFmEntityType OBJECT-TYPE
SYNTAX CoriantFmtypesEntityTypeFm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition.
entity type is not exactly same as MO. Entity type have smaller granularity referring to
different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2...
Separate functions will have different entity types so that profile can be set differently for different
service function which is more corresponding to user application.
"
::= { alarmProfileENTREntry 2 }
alarmProfileENTRTimePeriod OBJECT-TYPE
SYNTAX CoriantTypesManagementTimePeriod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the time-period increments during which PM data is collected.
"
::= { alarmProfileENTREntry 3 }
alarmProfileENTRSeverityLevelSa OBJECT-TYPE
SYNTAX CoriantFmtypesSeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the notification code (severity level) associated with the condition type of service affecting.
"
::= { alarmProfileENTREntry 4 }
alarmProfileENTRSeverityLevelNsa OBJECT-TYPE
SYNTAX CoriantFmtypesSeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the notification code (severity level) associated with the condition type of non-service affecting.
"
::= { alarmProfileENTREntry 5 }
standingCondition OBJECT IDENTIFIER ::= { fault 6 }
standingConditionTable OBJECT-TYPE
SYNTAX SEQUENCE OF StandingConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list includes active standing alarms."
::= { standingCondition 1 }
standingConditionEntry OBJECT-TYPE
SYNTAX StandingConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of standingConditionTable"
INDEX { standingConditionFmEntity,standingConditionConditionType,standingConditionLocation,standingConditionDirection,standingConditionTimePeriod }
::= { standingConditionTable 1 }
StandingConditionEntry ::=
SEQUENCE {
standingConditionFmEntity RowPointer,
standingConditionConditionType CoriantFmtypesConditionType,
standingConditionLocation CoriantTypesManagementLocation,
standingConditionDirection CoriantTypesManagementDirection,
standingConditionTimePeriod CoriantTypesManagementTimePeriod,
standingConditionServiceAffect CoriantFmtypesServiceAffectFm,
standingConditionSeverityLevel CoriantFmtypesSeverityLevel,
standingConditionOccurrenceDateTime IetfYangTypesDateAndTime,
standingConditionConditionDescription OCTET STRING,
standingConditionFmEntityType CoriantFmtypesEntityTypeFm,
standingConditionAlarmId OCTET STRING
}
standingConditionFmEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The management object instance which the alarm or condition is reported against.
"
::= { standingConditionEntry 1 }
standingConditionConditionType OBJECT-TYPE
SYNTAX CoriantFmtypesConditionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the current standing conditions which cause alarms and/or events.
"
::= { standingConditionEntry 2 }
standingConditionLocation OBJECT-TYPE
SYNTAX CoriantTypesManagementLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates if the alarm or event location is near end or far end.
"
::= { standingConditionEntry 3 }
standingConditionDirection OBJECT-TYPE
SYNTAX CoriantTypesManagementDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.
"
::= { standingConditionEntry 4 }
standingConditionTimePeriod OBJECT-TYPE
SYNTAX CoriantTypesManagementTimePeriod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the time-period increments during which PM data is collected.
"
::= { standingConditionEntry 5 }
standingConditionServiceAffect OBJECT-TYPE
SYNTAX CoriantFmtypesServiceAffectFm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates if an alarm is service affecting or non-service affecting.
NSA indicates non-service affecting.
SA indicates service affecting.
"
::= { standingConditionEntry 6 }
standingConditionSeverityLevel OBJECT-TYPE
SYNTAX CoriantFmtypesSeverityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the notification code (severity level) associated with the alarm type of service affecting.
"
::= { standingConditionEntry 7 }
standingConditionOccurrenceDateTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.
"
::= { standingConditionEntry 8 }
standingConditionConditionDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Describes the condition that caused the alarm.
"
::= { standingConditionEntry 9 }
standingConditionFmEntityType OBJECT-TYPE
SYNTAX CoriantFmtypesEntityTypeFm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the entity type the condition associated, which provides additional information for the object instance having the condition.
entity type is not exactly same as MO. Entity type have smaller granularity referring to
different service functions, e.g. 100GBase-R, 40GBase-R, 100GBase-R, ODU4, ODU2, ODU3, OTU4, OTUC2...
Separate functions will have different entity types so that profile can be set differently for different
service function which is more corresponding to user application.
"
::= { standingConditionEntry 10 }
standingConditionAlarmId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A system assigned unique identified to the alarm.
"
::= { standingConditionEntry 11 }
ne OBJECT IDENTIFIER ::= { groove 2 }
neInfo OBJECT IDENTIFIER ::= { ne 1 }
neId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Network Element's system identification code.
Note that this is unique identifier for each NE.
default value :"
::= { neInfo 1 }
neName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Name assigned to this particular NE.
A readable name for the NE. It can be used for NE.
But not expected to be used by NM for unique NE identification
The different function from ne-id is that user can keep ne-id unchanged,
which uniquely identifies the NE, and update ne-name if necessary.
default value :"
::= { neInfo 2 }
neType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of the NE
default value :GROOVE_G30"
::= { neInfo 3 }
neLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the location of this particular NE
"
::= { neInfo 4 }
neSite OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name or CLLI of the site where this NE is located
"
::= { neInfo 5 }
neAltitude OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The altitude of the Network Element in meters
UNITS:meters
"
::= { neInfo 6 }
neVendor OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vendor name of this NE
default value :Infinera"
::= { neInfo 7 }
neTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ambient temperature sensed by the primary shelf for NE level
"
::= { neInfo 8 }
system OBJECT IDENTIFIER ::= { ne 2 }
systemUnknownPluggableReport OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE.
default value :enabled"
::= { system 1 }
systemFactoryResetButton OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute will enable/disable factory reset button function on the NE.
default value :enabled"
::= { system 4 }
systemAutoServiceCreation OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Controls the system behavior regarding auto-creation of services for L1 modules based on port-mode.
Only applicable to muxponders (not for transponders).
default value :enabled"
::= { system 5 }
systemMultiShelf OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute will enable/disable multi-shelf function on the NE.
default value :disabled"
::= { system 6 }
console OBJECT IDENTIFIER ::= { ne 3 }
consoleBaudRate OBJECT-TYPE
SYNTAX INTEGER {
t9600 (6),
t19200 (7),
t38400 (8),
t57600 (11),
t115200 (12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate of console port
default value :9600"
::= { console 1 }
consoleEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable the console port
default value :true"
::= { console 2 }
ssh OBJECT IDENTIFIER ::= { ne 6 }
sshEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable shell access via SSH
default value :false"
::= { ssh 1 }
sshPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port that is listening for Linux shell ssh access
default value :8022"
::= { ssh 2 }
sshTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set the idle timeout in seconds on terminal connections to the system for console port and ssh debug port.Setting the value to 0 disables this attribute (meaning the session will not time out).
UNITS:seconds
default value :0"
::= { ssh 3 }
modelSelection OBJECT IDENTIFIER ::= { ne 7 }
modelSelectionOpenconfig OBJECT-TYPE
SYNTAX INTEGER {
enhanced (1),
false (2),
standard (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The openconfig working mode
default value :false"
::= { modelSelection 1 }
shelfPowerConsumption OBJECT IDENTIFIER ::= { ne 9 }
shelfPowerConsumptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfPowerConsumptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { shelfPowerConsumption 1 }
shelfPowerConsumptionEntry OBJECT-TYPE
SYNTAX ShelfPowerConsumptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of shelfPowerConsumptionTable"
INDEX { shelfPowerConsumptionShelfEntity,shelfPowerConsumptionMagic }
::= { shelfPowerConsumptionTable 1 }
ShelfPowerConsumptionEntry ::=
SEQUENCE {
shelfPowerConsumptionShelfEntity RowPointer,
shelfPowerConsumptionMagic Unsigned32,
shelfPowerConsumptionPowerConsumptionCurrent CoriantTypesPower,
shelfPowerConsumptionPowerConsumptionEstimatedMax CoriantTypesPower
}
shelfPowerConsumptionShelfEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { shelfPowerConsumptionEntry 1 }
shelfPowerConsumptionMagic OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { shelfPowerConsumptionEntry 2 }
shelfPowerConsumptionPowerConsumptionCurrent OBJECT-TYPE
SYNTAX CoriantTypesPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current power consumption of the system.
"
::= { shelfPowerConsumptionEntry 3 }
shelfPowerConsumptionPowerConsumptionEstimatedMax OBJECT-TYPE
SYNTAX CoriantTypesPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Derived maximal power consumption around room temperature.
"
::= { shelfPowerConsumptionEntry 4 }
l2Dcn OBJECT IDENTIFIER ::= { ne 10 }
l2DcnIpAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of device
"
::= { l2Dcn 1 }
l2DcnPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The length of the subnet prefix
"
::= { l2Dcn 2 }
l2DcnDefaultGateway OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default Gateway
"
::= { l2Dcn 3 }
l2DcnSource OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dhcp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { l2Dcn 4 }
l2DcnCurrentIpAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current IP Address of device
"
::= { l2Dcn 5 }
l2DcnCurrentPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current length of the subnet prefix
"
::= { l2Dcn 6 }
l2DcnCurrentDefaultGateway OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Default Gateway
"
::= { l2Dcn 7 }
l2DcnMacAddress OBJECT-TYPE
SYNTAX IetfYangTypesMacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC Address of device
"
::= { l2Dcn 8 }
multishelfFileManagement OBJECT IDENTIFIER ::= { ne 11 }
multishelfFileManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultishelfFileManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "multishelf-file-management YANG models"
::= { multishelfFileManagement 1 }
multishelfFileManagementEntry OBJECT-TYPE
SYNTAX MultishelfFileManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of multishelfFileManagementTable"
INDEX { multishelfFileManagementShelfId }
::= { multishelfFileManagementTable 1 }
MultishelfFileManagementEntry ::=
SEQUENCE {
multishelfFileManagementShelfId CoriantTypesShelfId
}
multishelfFileManagementShelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { multishelfFileManagementEntry 1 }
deleteFile OBJECT IDENTIFIER ::= { ne 12 }
deleteFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF DeleteFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { deleteFile 1 }
deleteFileEntry OBJECT-TYPE
SYNTAX DeleteFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of deleteFileTable"
INDEX { multishelfFileManagementShelfId }
::= { deleteFileTable 1 }
DeleteFileEntry ::=
SEQUENCE {
deleteFileFileName OCTET STRING,
deleteFileResult INTEGER,
deleteFileResultMsg OCTET STRING
}
deleteFileFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { deleteFileEntry 1 }
deleteFileResult OBJECT-TYPE
SYNTAX INTEGER {
successful (0),
failed (1),
unknown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { deleteFileEntry 2 }
deleteFileResultMsg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { deleteFileEntry 3 }
showFile OBJECT IDENTIFIER ::= { ne 13 }
showFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShowFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { showFile 1 }
showFileEntry OBJECT-TYPE
SYNTAX ShowFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of showFileTable"
INDEX { multishelfFileManagementShelfId }
::= { showFileTable 1 }
ShowFileEntry ::=
SEQUENCE {
showFileFileName OCTET STRING,
showFileResult INTEGER,
showFileResultMsg OCTET STRING
}
showFileFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { showFileEntry 1 }
showFileResult OBJECT-TYPE
SYNTAX INTEGER {
successful (0),
failed (1),
unknown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { showFileEntry 2 }
showFileResultMsg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..511))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { showFileEntry 3 }
fileTransfer OBJECT IDENTIFIER ::= { ne 14 }
fileTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { fileTransfer 1 }
fileTransferEntry OBJECT-TYPE
SYNTAX FileTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fileTransferTable"
INDEX { multishelfFileManagementShelfId }
::= { fileTransferTable 1 }
FileTransferEntry ::=
SEQUENCE {
fileTransferAction INTEGER,
fileTransferLocalFilePath OCTET STRING,
fileTransferRemoteFilePath OCTET STRING,
fileTransferResult INTEGER,
fileTransferResultMsg OCTET STRING,
fileTransferExeResult INTEGER,
fileTransferExeResultMsg OCTET STRING
}
fileTransferAction OBJECT-TYPE
SYNTAX INTEGER {
upload (1),
download (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 1 }
fileTransferLocalFilePath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 2 }
fileTransferRemoteFilePath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 3 }
fileTransferResult OBJECT-TYPE
SYNTAX INTEGER {
successful (0),
failed (1),
unknown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 4 }
fileTransferResultMsg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..511))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 5 }
fileTransferExeResult OBJECT-TYPE
SYNTAX INTEGER {
successful (0),
failed (1),
unknown (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 6 }
fileTransferExeResultMsg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..511))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { fileTransferEntry 7 }
multishelfSwManagement OBJECT IDENTIFIER ::= { ne 15 }
multishelfSwManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultishelfSwManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "multishelf-sw-management YANG models"
::= { multishelfSwManagement 1 }
multishelfSwManagementEntry OBJECT-TYPE
SYNTAX MultishelfSwManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of multishelfSwManagementTable"
INDEX { multishelfSwManagementShelfId }
::= { multishelfSwManagementTable 1 }
MultishelfSwManagementEntry ::=
SEQUENCE {
multishelfSwManagementShelfId CoriantTypesShelfId
}
multishelfSwManagementShelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { multishelfSwManagementEntry 1 }
swStageNotification OBJECT IDENTIFIER ::= { ne 16 }
swStageNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwStageNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { swStageNotification 1 }
swStageNotificationEntry OBJECT-TYPE
SYNTAX SwStageNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of swStageNotificationTable"
INDEX { multishelfSwManagementShelfId }
::= { swStageNotificationTable 1 }
SwStageNotificationEntry ::=
SEQUENCE {
swStageNotificationStatus INTEGER,
swStageNotificationStatusMessage OCTET STRING,
swStageNotificationStageState INTEGER
}
swStageNotificationStatus OBJECT-TYPE
SYNTAX INTEGER {
successful (1),
failed (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Successful or Failed
"
::= { swStageNotificationEntry 1 }
swStageNotificationStatusMessage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives a more detailed status
"
::= { swStageNotificationEntry 2 }
swStageNotificationStageState OBJECT-TYPE
SYNTAX INTEGER {
default (0),
staging (1),
staged (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { swStageNotificationEntry 3 }
swActivateNotification OBJECT IDENTIFIER ::= { ne 17 }
swActivateNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwActivateNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { swActivateNotification 1 }
swActivateNotificationEntry OBJECT-TYPE
SYNTAX SwActivateNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of swActivateNotificationTable"
INDEX { multishelfSwManagementShelfId }
::= { swActivateNotificationTable 1 }
SwActivateNotificationEntry ::=
SEQUENCE {
swActivateNotificationActivateNotificationType INTEGER,
swActivateNotificationStatus INTEGER,
swActivateNotificationStatusMessage OCTET STRING,
swActivateNotificationActivateState INTEGER,
swActivateNotificationUpgradeResult INTEGER
}
swActivateNotificationActivateNotificationType OBJECT-TYPE
SYNTAX INTEGER {
activate (1),
commit (2),
cancel (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Successful or Failed
"
::= { swActivateNotificationEntry 1 }
swActivateNotificationStatus OBJECT-TYPE
SYNTAX INTEGER {
successful (1),
failed (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Successful or Failed
"
::= { swActivateNotificationEntry 2 }
swActivateNotificationStatusMessage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gives a more detailed status
"
::= { swActivateNotificationEntry 3 }
swActivateNotificationActivateState OBJECT-TYPE
SYNTAX INTEGER {
default (0),
beforeReset (1),
afterReset (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { swActivateNotificationEntry 4 }
swActivateNotificationUpgradeResult OBJECT-TYPE
SYNTAX INTEGER {
default (0),
successful (1),
failed (2),
rollback (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { swActivateNotificationEntry 5 }
multishelfDiscovery OBJECT IDENTIFIER ::= { ne 18 }
multishelfDiscoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF MultishelfDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { multishelfDiscovery 1 }
multishelfDiscoveryEntry OBJECT-TYPE
SYNTAX MultishelfDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of multishelfDiscoveryTable"
INDEX { multishelfDiscoveryShelfSerialNumber }
::= { multishelfDiscoveryTable 1 }
MultishelfDiscoveryEntry ::=
SEQUENCE {
multishelfDiscoveryShelfSerialNumber OCTET STRING,
multishelfDiscoveryShelfMacAddress OCTET STRING,
multishelfDiscoveryShelfStatus INTEGER,
multishelfDiscoveryShelfId CoriantTypesShelfId
}
multishelfDiscoveryShelfSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of device
"
::= { multishelfDiscoveryEntry 1 }
multishelfDiscoveryShelfMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of the shelf
"
::= { multishelfDiscoveryEntry 2 }
multishelfDiscoveryShelfStatus OBJECT-TYPE
SYNTAX INTEGER {
offline (0),
online (1),
shelfidallocating (2),
waitdbready (3),
idle (4),
swupgrade (5),
keepsilent (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { multishelfDiscoveryEntry 3 }
multishelfDiscoveryShelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the shelf after assigned by the system.
"
::= { multishelfDiscoveryEntry 4 }
capabilities OBJECT IDENTIFIER ::= { ne 19 }
capabilitiesMaxDegrees OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max. number of degrees supported by device
"
::= { capabilities 1 }
capabilitiesMaxSrgs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max. number of SRGs in an add/drop group
"
::= { capabilities 2 }
equipment OBJECT IDENTIFIER ::= { groove 3 }
shelf OBJECT IDENTIFIER ::= { equipment 1 }
shelfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { shelf 1 }
shelfEntry OBJECT-TYPE
SYNTAX ShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of shelfTable"
INDEX { shelfId }
::= { shelfTable 1 }
ShelfEntry ::=
SEQUENCE {
shelfId CoriantTypesShelfId,
shelfLocation OCTET STRING,
shelfInletTemperature CoriantTypesTemperature,
shelfOutletTemperature CoriantTypesTemperature,
shelfAdminStatus INTEGER,
shelfOperStatus INTEGER,
shelfAvailStatus BITS,
shelfAliasName OCTET STRING,
shelfType OCTET STRING,
shelfSerialNumber OCTET STRING
}
shelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the shelf.
It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.
"
::= { shelfEntry 1 }
shelfLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the location of this particular shelf.
"
::= { shelfEntry 2 }
shelfInletTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "shelf inlet temperature
"
::= { shelfEntry 3 }
shelfOutletTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "shelf outlet temperature
"
::= { shelfEntry 4 }
shelfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { shelfEntry 5 }
shelfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { shelfEntry 6 }
shelfAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { shelfEntry 7 }
shelfAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { shelfEntry 8 }
shelfType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of the shelf.
"
::= { shelfEntry 9 }
shelfSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the shelf.
"
::= { shelfEntry 13 }
slot OBJECT IDENTIFIER ::= { equipment 2 }
slotTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { slot 1 }
slotEntry OBJECT-TYPE
SYNTAX SlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of slotTable"
INDEX { shelfId,slotId }
::= { slotTable 1 }
SlotEntry ::=
SEQUENCE {
slotId CoriantTypesSlotId,
slotActualCardType CoriantTypesEquipmentType,
slotPossibleCardTypes OCTET STRING,
slotAdminStatus INTEGER,
slotOperStatus INTEGER,
slotAvailStatus BITS,
slotAliasName OCTET STRING
}
slotId OBJECT-TYPE
SYNTAX CoriantTypesSlotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the slot. It shall be an integer number and assigned implicitly by the system.
"
::= { slotEntry 1 }
slotActualCardType OBJECT-TYPE
SYNTAX CoriantTypesEquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Equipment type for each slot/subslot according to the actually equipping.
Needs to be re-defined in the project specific model.
default value :empty"
::= { slotEntry 2 }
slotPossibleCardTypes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Defined all the equipment types which can be installed on the slot/subslot.
This is a leaf list, encode by some leafs.
"
::= { slotEntry 3 }
slotAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { slotEntry 4 }
slotOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { slotEntry 5 }
slotAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { slotEntry 6 }
slotAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { slotEntry 7 }
card OBJECT IDENTIFIER ::= { equipment 3 }
cardTable OBJECT-TYPE
SYNTAX SEQUENCE OF CardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Card is a container carried by a slot."
::= { card 1 }
cardEntry OBJECT-TYPE
SYNTAX CardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cardTable"
INDEX { shelfId,slotId }
::= { cardTable 1 }
CardEntry ::=
SEQUENCE {
cardRequiredType CoriantTypesCardType,
cardEquipmentName OCTET STRING,
cardAdminStatus INTEGER,
cardOperStatus INTEGER,
cardAvailStatus BITS,
cardAliasName OCTET STRING,
cardFanSpeedRate CoriantTypesPercentage,
cardSwitchingType INTEGER,
cardTemperature CoriantTypesTemperature,
cardMode INTEGER
}
cardRequiredType OBJECT-TYPE
SYNTAX CoriantTypesCardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates the equipment type to identify the module.
Needs to be re-defined in the project specific model.
"
::= { cardEntry 1 }
cardEquipmentName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates an additional field to identify the module.
"
::= { cardEntry 2 }
cardAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { cardEntry 3 }
cardOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { cardEntry 4 }
cardAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { cardEntry 5 }
cardAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { cardEntry 6 }
cardFanSpeedRate OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The fan speed of percentage.
Conditions:../required-type = 'FAN'
"
::= { cardEntry 7 }
cardSwitchingType OBJECT-TYPE
SYNTAX INTEGER {
otn (0),
tdm (1),
optical (2),
packet (3),
opticalRouter (4),
amplifier (5),
omd (6),
cad (7),
notApplicable (8),
otnTransponder (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The traffic switching type of card.
Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') and (../required-type != 'FRCU') and (../required-type != 'VIR-SIM')
default value :otn"
::= { cardEntry 8 }
cardTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature at the monitoring point.
"
::= { cardEntry 9 }
cardMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
normal (1),
regen (2),
mixFunction (3),
greyMuxponder (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify the card mode, e.g. normal or regen.
default value :normal"
::= { cardEntry 10 }
subslot OBJECT IDENTIFIER ::= { equipment 4 }
subslotTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubslotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { subslot 1 }
subslotEntry OBJECT-TYPE
SYNTAX SubslotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of subslotTable"
INDEX { shelfId,slotId,subslotId }
::= { subslotTable 1 }
SubslotEntry ::=
SEQUENCE {
subslotId CoriantTypesSlotId,
subslotActualCardType CoriantTypesEquipmentType,
subslotPossibleCardTypes OCTET STRING,
subslotAdminStatus INTEGER,
subslotOperStatus INTEGER,
subslotAvailStatus BITS,
subslotAliasName OCTET STRING
}
subslotId OBJECT-TYPE
SYNTAX CoriantTypesSlotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the subslot.
"
::= { subslotEntry 1 }
subslotActualCardType OBJECT-TYPE
SYNTAX CoriantTypesEquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Equipment type for each slot/subslot according to the actually equipping.
Needs to be re-defined in the project specific model.
default value :empty"
::= { subslotEntry 2 }
subslotPossibleCardTypes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Defined all the equipment types which can be installed on the slot/subslot.
This is a leaf list, encode by some leafs.
"
::= { subslotEntry 3 }
subslotAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { subslotEntry 4 }
subslotOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { subslotEntry 5 }
subslotAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { subslotEntry 6 }
subslotAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { subslotEntry 7 }
subcard OBJECT IDENTIFIER ::= { equipment 5 }
subcardTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Subcard is a container carried by a subslot."
::= { subcard 1 }
subcardEntry OBJECT-TYPE
SYNTAX SubcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of subcardTable"
INDEX { shelfId,slotId,subslotId }
::= { subcardTable 1 }
SubcardEntry ::=
SEQUENCE {
subcardRequiredType CoriantTypesCardType,
subcardEquipmentName OCTET STRING,
subcardAdminStatus INTEGER,
subcardOperStatus INTEGER,
subcardAvailStatus BITS,
subcardAliasName OCTET STRING,
subcardTemperature CoriantTypesTemperature,
subcardSwitchingType INTEGER
}
subcardRequiredType OBJECT-TYPE
SYNTAX CoriantTypesCardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates the equipment type to identify the module.
Needs to be re-defined in the project specific model.
"
::= { subcardEntry 1 }
subcardEquipmentName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates an additional field to identify the module.
"
::= { subcardEntry 2 }
subcardAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { subcardEntry 3 }
subcardOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { subcardEntry 4 }
subcardAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { subcardEntry 5 }
subcardAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { subcardEntry 6 }
subcardTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature at the monitoring point.
"
::= { subcardEntry 7 }
subcardSwitchingType OBJECT-TYPE
SYNTAX INTEGER {
otn (0),
tdm (1),
optical (2),
packet (3),
opticalRouter (4),
amplifier (5),
omd (6),
cad (7),
notApplicable (8),
otnTransponder (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The traffic switching type of card.
Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') and (../required-type != 'FRCU') and (../required-type != 'VIR-SIM')
default value :otn"
::= { subcardEntry 11 }
port OBJECT IDENTIFIER ::= { equipment 6 }
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { port 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of portTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portId CoriantTypesPortId,
portPossiblePluggableTypes OCTET STRING,
portActualPluggableType CoriantTypesEquipmentType,
portRxOpticalPower CoriantTypesOpticalPower,
portTxOpticalPower CoriantTypesOpticalPower,
portRxOpticalPowerSelectedChannel CoriantTypesOpticalPower,
portDirectionType CoriantTypesTypeOfDirection,
portName CoriantTypesNameIdentifier,
portType INTEGER,
portMode CoriantTypesPortMode,
portAdminStatus INTEGER,
portOperStatus INTEGER,
portAvailStatus BITS,
portAliasName OCTET STRING,
portServiceLabel OCTET STRING,
portConnectedTo OCTET STRING,
portArcConfig INTEGER,
portArcState INTEGER,
portArcSubState INTEGER,
portArcTimer Unsigned32,
portArcRemainingTime OCTET STRING,
portExternalConnectivity CoriantTypesYesNo
}
portId OBJECT-TYPE
SYNTAX CoriantTypesPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier is defined to uniquely identify the port.
"
::= { portEntry 1 }
portPossiblePluggableTypes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Defined all the pluggable types which can be equipped on the port.
Needs to be re-defined in the project specific model.
This is a leaf list, encode by some leafs.
Conditions:(../port-type != 'optical') and (../port-type != 'otdr') and (../port-type != 'optical-nomon') and (../port-type != 'ocm') and (../port-type != 'mgmt-eth')
"
::= { portEntry 2 }
portActualPluggableType OBJECT-TYPE
SYNTAX CoriantTypesEquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Pluggable type for each port according to the actually equipping.
Needs to be re-defined in the project specific model.
Conditions:(../port-type != 'optical') and (../port-type != 'ocm') and (../port-type != 'optical-nomon') and (../port-type != 'otdr') and (../port-type != 'mgmt-eth')
default value :empty"
::= { portEntry 3 }
portRxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
"
::= { portEntry 4 }
portTxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
"
::= { portEntry 5 }
portRxOpticalPowerSelectedChannel OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical power of the selected channel on coherent receiver,
which will be different from the rx-optical-power when multiple channels input simultaneously.
"
::= { portEntry 6 }
portDirectionType OBJECT-TYPE
SYNTAX CoriantTypesTypeOfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supported direction of the optical port.
"
::= { portEntry 15 }
portName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the port.
default value :unspecified"
::= { portEntry 16 }
portType OBJECT-TYPE
SYNTAX INTEGER {
client (1),
line (2),
clientSubport (3),
optical (4),
otdr (5),
opticalNomon (6),
ocm (7),
osc (8),
mgmtEth (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of port. Needs to be provided upon Port creation
default value :optical-nomon"
::= { portEntry 17 }
portMode OBJECT-TYPE
SYNTAX CoriantTypesPortMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The working mode of port.
For client side:
CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable.
Default is 100GBE when card created.
CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable;
applicable to subport 1 to 4; possible values are: 10GBE, not-applicable.
Default is not-applicable.
For Line side:
CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G.
Default is 16QAM_200G.
non applicable : there shall not be service created on the port or subport
subport: the port shall create four subports under the port to support 4x10G.
40GBE: 40GBE service shall be created on the port with default mapping GMP.
10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff.
100GBE: 100GBE service shall be created on the subport with default mapping GMP.
QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port.
16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port.
8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports.
Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service.
Restrictions:
Changing Port mode shall be allowed only if the impacted port or subport object is administratively down.
Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'.
If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied.
If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port.
When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal.
Conditions:(../port-type = 'line') or (../port-type = 'client') or (../port-type = 'client-subport')
default value :not-applicable"
::= { portEntry 18 }
portAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { portEntry 19 }
portOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { portEntry 20 }
portAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { portEntry 21 }
portAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { portEntry 22 }
portServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { portEntry 23 }
portConnectedTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate neighbour port/facility entity to which the current port/facility is connected to.
"
::= { portEntry 24 }
portArcConfig OBJECT-TYPE
SYNTAX INTEGER {
alm (1),
nalmQi (2),
nalm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The configurable mode of the Alarm Report Control (ARC).
default value :nalm-qi"
::= { portEntry 25 }
portArcState OBJECT-TYPE
SYNTAX INTEGER {
alm (1),
nalmQi (2),
nalm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The current mode of the Alarm Report Control (ARC).
default value :nalm-qi"
::= { portEntry 26 }
portArcSubState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nalmCd (1),
nalmNr (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state
default value :nalm-nr"
::= { portEntry 27 }
portArcTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10080)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The holdoff timer value in minutes of the ARC.
Range is 0 - 10080 minutes
UNITS:minutes
default value :1440"
::= { portEntry 28 }
portArcRemainingTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
default value :00d-00h:00m:00s"
::= { portEntry 29 }
portExternalConnectivity OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port is connected externally or not.
default value :no"
::= { portEntry 30 }
subport OBJECT IDENTIFIER ::= { equipment 7 }
subportTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { subport 1 }
subportEntry OBJECT-TYPE
SYNTAX SubportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of subportTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { subportTable 1 }
SubportEntry ::=
SEQUENCE {
subportId CoriantTypesPortId,
subportPortName CoriantTypesNameIdentifier,
subportPortType INTEGER,
subportPortMode CoriantTypesPortMode,
subportAdminStatus INTEGER,
subportOperStatus INTEGER,
subportAvailStatus BITS,
subportAliasName OCTET STRING,
subportServiceLabel OCTET STRING,
subportConnectedTo OCTET STRING,
subportArcConfig INTEGER,
subportArcState INTEGER,
subportArcSubState INTEGER,
subportArcTimer Unsigned32,
subportArcRemainingTime OCTET STRING,
subportRxOpticalPower CoriantTypesOpticalPower,
subportTxOpticalPower CoriantTypesOpticalPower,
subportExternalConnectivity CoriantTypesYesNo,
subportDirectionType CoriantTypesTypeOfDirection
}
subportId OBJECT-TYPE
SYNTAX CoriantTypesPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier is defined to uniquely identify the subport.
"
::= { subportEntry 1 }
subportPortName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the port.
default value :unspecified"
::= { subportEntry 2 }
subportPortType OBJECT-TYPE
SYNTAX INTEGER {
client (1),
line (2),
clientSubport (3),
optical (4),
otdr (5),
opticalNomon (6),
ocm (7),
osc (8),
mgmtEth (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of port. Needs to be provided upon Port creation
default value :optical-nomon"
::= { subportEntry 3 }
subportPortMode OBJECT-TYPE
SYNTAX CoriantTypesPortMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The working mode of port.
For client side:
CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable.
Default is 100GBE when card created.
CHM2: applicable to port 3 to 11; possible values are: 40GBE, subport, not-applicable;
applicable to subport 1 to 4; possible values are: 10GBE, not-applicable.
Default is not-applicable.
For Line side:
CHM1/CHM2: possible values are: QPSK_100G, 16QAM_200G, 8QAM_300G.
Default is 16QAM_200G.
non applicable : there shall not be service created on the port or subport
subport: the port shall create four subports under the port to support 4x10G.
40GBE: 40GBE service shall be created on the port with default mapping GMP.
10GBE: 10GBE service shall be created on the subport with default mapping BMP with fixed stuff.
100GBE: 100GBE service shall be created on the subport with default mapping GMP.
QPSK_100G: 100G OTU4 service with DP-QPSK coherent modulation format shall be created on the port.
16QAM_200G: 200G OTUC2 service with DP-16QAM coherent modulation format shall be created on the port.
8QAM_300G: 300G OTUC3 service with DP-8QAM coherent modulation format shall be created on the coupled two line ports.
Note 4x10G is to create subport managed objects under the port. Each subport can support a 10G service.
Restrictions:
Changing Port mode shall be allowed only if the impacted port or subport object is administratively down.
Changing a 'subport' port mode of a port to be other value shall only be allowed only if port-modes of all the subports under the port are 'not-applicable'.
If there is explicitly cross-connection is created associated with the ODU of the port, change port mode of the port shall be denied.
If the port mode is a coupled port mode, e.g. 8QAM_300G, port mode can only be edited on the lower number of port within the coupled ports. The other port (or ports if more than two) will have read-only port mode value same as this lowest number port.
When port/subport is set to admin down, laser will be shutdown, ingress side will insert proper maintenance signal.
Conditions:(../port-type = 'line') or (../port-type = 'client') or (../port-type = 'client-subport')
default value :not-applicable"
::= { subportEntry 4 }
subportAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { subportEntry 5 }
subportOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { subportEntry 6 }
subportAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { subportEntry 7 }
subportAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { subportEntry 8 }
subportServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { subportEntry 9 }
subportConnectedTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate neighbour port/facility entity to which the current port/facility is connected to.
"
::= { subportEntry 10 }
subportArcConfig OBJECT-TYPE
SYNTAX INTEGER {
alm (1),
nalmQi (2),
nalm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The configurable mode of the Alarm Report Control (ARC).
default value :nalm-qi"
::= { subportEntry 11 }
subportArcState OBJECT-TYPE
SYNTAX INTEGER {
alm (1),
nalmQi (2),
nalm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The current mode of the Alarm Report Control (ARC).
default value :nalm-qi"
::= { subportEntry 12 }
subportArcSubState OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
nalmCd (1),
nalmNr (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state
default value :nalm-nr"
::= { subportEntry 13 }
subportArcTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10080)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The holdoff timer value in minutes of the ARC.
Range is 0 - 10080 minutes
UNITS:minutes
default value :1440"
::= { subportEntry 14 }
subportArcRemainingTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported.
default value :00d-00h:00m:00s"
::= { subportEntry 15 }
subportRxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
"
::= { subportEntry 16 }
subportTxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
"
::= { subportEntry 17 }
subportExternalConnectivity OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port is connected externally or not.
default value :no"
::= { subportEntry 18 }
subportDirectionType OBJECT-TYPE
SYNTAX CoriantTypesTypeOfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supported direction of the optical port.
"
::= { subportEntry 19 }
pluggable OBJECT IDENTIFIER ::= { equipment 8 }
pluggableTable OBJECT-TYPE
SYNTAX SEQUENCE OF PluggableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Pluggable object"
::= { pluggable 1 }
pluggableEntry OBJECT-TYPE
SYNTAX PluggableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pluggableTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { pluggableTable 1 }
PluggableEntry ::=
SEQUENCE {
pluggableRequiredType CoriantTypesPluggableType,
pluggableFormFactor CoriantTypesPluggableFormFactor,
pluggableInterfaceType OCTET STRING,
pluggableLaserSource INTEGER,
pluggableHwVersion OCTET STRING,
pluggableVendor OCTET STRING,
pluggableSerialNumber OCTET STRING,
pluggableFwVersion OCTET STRING,
pluggablePartNumber OCTET STRING,
pluggableClei OCTET STRING,
pluggableEquipmentName OCTET STRING,
pluggableAdminStatus INTEGER,
pluggableOperStatus INTEGER,
pluggableAvailStatus BITS,
pluggableAliasName OCTET STRING,
pluggableTemperature CoriantTypesTemperature,
pluggableVoltage OCTET STRING
}
pluggableRequiredType OBJECT-TYPE
SYNTAX CoriantTypesPluggableType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates the equipment type to identify the module.
Needs to be re-defined in the project specific model.
"
::= { pluggableEntry 1 }
pluggableFormFactor OBJECT-TYPE
SYNTAX CoriantTypesPluggableFormFactor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the exact form factor of the pluggable.
default value :Unrecognized"
::= { pluggableEntry 2 }
pluggableInterfaceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating interface type of the pluggable.
default value :"
::= { pluggableEntry 3 }
pluggableLaserSource OBJECT-TYPE
SYNTAX INTEGER {
txLoShared (1),
txLoIndependent (2),
notAvailable (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working
Conditions:../required-type = 'CFP2'
default value :not-available"
::= { pluggableEntry 4 }
pluggableHwVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute Identifies the Hardware Version of the module that populates the slot.
"
::= { pluggableEntry 5 }
pluggableVendor OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Vendor information.
"
::= { pluggableEntry 6 }
pluggableSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This is the value of serial number stored in EEPROM of the equipment.
"
::= { pluggableEntry 7 }
pluggableFwVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Current Firmware (FW) version on the equipment.
"
::= { pluggableEntry 8 }
pluggablePartNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifies the Part Number of the equipment.
"
::= { pluggableEntry 9 }
pluggableClei OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifies the CLEI code number of the equipment.
The CLEI code is a 10-character code that identifies
communications equipment. It describes product type, features,
source document, and associated drawings and vintages.
"
::= { pluggableEntry 10 }
pluggableEquipmentName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates an additional field to identify the module.
"
::= { pluggableEntry 11 }
pluggableAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { pluggableEntry 12 }
pluggableOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { pluggableEntry 13 }
pluggableAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { pluggableEntry 14 }
pluggableAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { pluggableEntry 15 }
pluggableTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature at the monitoring point.
"
::= { pluggableEntry 16 }
pluggableVoltage OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The current voltage applied by the module. The current is
expressed in V with up to two decimal precision. Just
supply the instant value.
UNITS:V
"
::= { pluggableEntry 17 }
amplifier OBJECT IDENTIFIER ::= { equipment 9 }
amplifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF AmplifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of optical amplifier on an equipment."
::= { amplifier 1 }
amplifierEntry OBJECT-TYPE
SYNTAX AmplifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of amplifierTable"
INDEX { shelfId,slotId,subslotId,amplifierName }
::= { amplifierTable 1 }
AmplifierEntry ::=
SEQUENCE {
amplifierName CoriantTypesNameIdentifier,
amplifierSupportingInputPort RowPointer,
amplifierSupportingOutputPort RowPointer,
amplifierAdminStatus INTEGER,
amplifierOperStatus INTEGER,
amplifierAvailStatus BITS,
amplifierAliasName OCTET STRING,
amplifierEnable CoriantTypesEnableSwitch,
amplifierInputLosShutdown CoriantTypesEnableSwitch,
amplifierControlMode INTEGER,
amplifierMode INTEGER,
amplifierType INTEGER,
amplifierTargetGain CoriantTypesOpticalDB,
amplifierOperatingGain CoriantTypesOpticalDB,
amplifierGainAdjustment CoriantTypesOpticalDB,
amplifierOutputPowerMon CoriantTypesOpticalPower,
amplifierOutputPowerMonWithAse CoriantTypesOpticalPower,
amplifierInputPowerMon CoriantTypesOpticalPower,
amplifierOutputVoa CoriantTypesOpticalDB,
amplifierPowerBeforeOutputVoa CoriantTypesOpticalPower,
amplifierGainTilt CoriantTypesOpticalDB,
amplifierTiltControlMode INTEGER,
amplifierActualGainTilt CoriantTypesOpticalDB,
amplifierPumpStatus CoriantTypesEnableSwitch,
amplifierGainRangeControl INTEGER,
amplifierTargetGainRange AmplifierGainRangeType,
amplifierWorkingGainRange AmplifierGainRangeType,
amplifierActualOutputVoa CoriantTypesOpticalDB,
amplifierPartnerAmp OCTET STRING,
amplifierEgressAverageChannelPower CoriantTypesOpticalPower
}
amplifierName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User-defined name assigned to identify a specific amplifier in the device
"
::= { amplifierEntry 1 }
amplifierSupportingInputPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the supporting input port.
"
::= { amplifierEntry 2 }
amplifierSupportingOutputPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the supporting output port.
"
::= { amplifierEntry 3 }
amplifierAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { amplifierEntry 4 }
amplifierOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { amplifierEntry 5 }
amplifierAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { amplifierEntry 6 }
amplifierAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { amplifierEntry 7 }
amplifierEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configuration for enable or disable the amplifier.
default value :disabled"
::= { amplifierEntry 8 }
amplifierInputLosShutdown OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable or disable the function of automatic shutdown per input LOS.
default value :enabled"
::= { amplifierEntry 9 }
amplifierControlMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2),
autoMaxPw (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Control mode of the amplifier.
default value :auto-max-pw"
::= { amplifierEntry 10 }
amplifierMode OBJECT-TYPE
SYNTAX INTEGER {
constantPower (1),
constantGain (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating mode of the amplifier
default value :constant-gain"
::= { amplifierEntry 11 }
amplifierType OBJECT-TYPE
SYNTAX INTEGER {
fixedGainEdfa (1),
variableGainEdfa (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of the amplifier.
default value :variable-gain-EDFA"
::= { amplifierEntry 12 }
amplifierTargetGain OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Setting gain to the amplifier for constant-gain mode in manual control mode.
"
::= { amplifierEntry 13 }
amplifierOperatingGain OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operating gain of the amplifier, which is the actually configured gain on the amplifier.
"
::= { amplifierEntry 14 }
amplifierGainAdjustment OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value is used for adjustment of gain when the amplifier in automatic control mode,
the automatically caculated gain will include offset of this attribute.
default value :0.0"
::= { amplifierEntry 15 }
amplifierOutputPowerMon OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored aggregation signal output power.
UNITS:dBm
"
::= { amplifierEntry 18 }
amplifierOutputPowerMonWithAse OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored aggregation total output power including both signal and ASE.
UNITS:dBm
"
::= { amplifierEntry 19 }
amplifierInputPowerMon OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored aggregation input power.
UNITS:dBm
"
::= { amplifierEntry 20 }
amplifierOutputVoa OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configurable optical attenuation at output of the amplifier.
default value :0.0"
::= { amplifierEntry 21 }
amplifierPowerBeforeOutputVoa OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored optical power after output VOA.
UNITS:dBm
"
::= { amplifierEntry 22 }
amplifierGainTilt OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify gain tilt of the amplifier.
default value :0.0"
::= { amplifierEntry 23 }
amplifierTiltControlMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2),
autoPlanned (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify gain tilt control modes.
default value :manual"
::= { amplifierEntry 24 }
amplifierActualGainTilt OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting of gain tilt on the amplifier.
default value :0.0"
::= { amplifierEntry 25 }
amplifierPumpStatus OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amplifier's pump working status, enable or disable
default value :disabled"
::= { amplifierEntry 26 }
amplifierGainRangeControl OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The gain range working mode for multi gain range supported amplifier
default value :auto"
::= { amplifierEntry 27 }
amplifierTargetGainRange OBJECT-TYPE
SYNTAX AmplifierGainRangeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The gain-range selected one for manual gain-range-mode
default value :standard"
::= { amplifierEntry 28 }
amplifierWorkingGainRange OBJECT-TYPE
SYNTAX AmplifierGainRangeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current working gain range
default value :not-available"
::= { amplifierEntry 29 }
amplifierActualOutputVoa OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Working optical attenuation at output of the amplifier.
default value :0.0"
::= { amplifierEntry 30 }
amplifierPartnerAmp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The partner amplifier for in line amplifier working mode.
default value :not-available"
::= { amplifierEntry 31 }
amplifierEgressAverageChannelPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Based upon the total max power across the 4.8 THz passband.
Defined as optional for ODL support, but shall be considered as mandatory and provided
by the controller when the control-mode is set to gainLoss for amplifier setting
"
::= { amplifierEntry 32 }
tdc OBJECT IDENTIFIER ::= { equipment 10 }
tdcTable OBJECT-TYPE
SYNTAX SEQUENCE OF TdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of optical tdc on an equipment."
::= { tdc 1 }
tdcEntry OBJECT-TYPE
SYNTAX TdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of tdcTable"
INDEX { shelfId,slotId,subslotId,tdcName }
::= { tdcTable 1 }
TdcEntry ::=
SEQUENCE {
tdcName CoriantTypesNameIdentifier,
tdcSupportingInputPort RowPointer,
tdcSupportingOutputPort RowPointer,
tdcAdminStatus INTEGER,
tdcOperStatus INTEGER,
tdcAvailStatus BITS,
tdcAliasName OCTET STRING,
tdcMode INTEGER,
tdcReferenceFrequency CoriantTypesFreq,
tdcActualReferenceFrequency Unsigned32,
tdcFrequencyRangeMin Unsigned32,
tdcFrequencyRangeMax Unsigned32,
tdcChromaticDispersion INTEGER,
tdcChromaticDispersionAdjustment INTEGER,
tdcActualChromaticDispersion INTEGER,
tdcCdRangeMin INTEGER,
tdcCdRangeMax INTEGER
}
tdcName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User-defined name assigned to identify a specific tdc in the device
"
::= { tdcEntry 1 }
tdcSupportingInputPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the supporting input port.
"
::= { tdcEntry 2 }
tdcSupportingOutputPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the supporting output port.
"
::= { tdcEntry 3 }
tdcAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { tdcEntry 4 }
tdcOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { tdcEntry 5 }
tdcAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { tdcEntry 6 }
tdcAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { tdcEntry 7 }
tdcMode OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
auto (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value;
Auto: system will automatically decide the CD value per measured chromatic dispersion in the span.
default value :auto"
::= { tdcEntry 8 }
tdcReferenceFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Indicating the reference wavelength of the TDC.
UNITS:MHz
"
::= { tdcEntry 9 }
tdcActualReferenceFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Indicating the actual reference wavelength of the TDC.
UNITS:MHz
"
::= { tdcEntry 10 }
tdcFrequencyRangeMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum of supported wavelength.
UNITS:MHz
"
::= { tdcEntry 11 }
tdcFrequencyRangeMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum of supported wavelength.
UNITS:MHz
"
::= { tdcEntry 12 }
tdcChromaticDispersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The setting value of Chromatic Dispersion.
UNITS:ps/nm
default value :0"
::= { tdcEntry 13 }
tdcChromaticDispersionAdjustment OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode.
UNITS:ps/nm
"
::= { tdcEntry 14 }
tdcActualChromaticDispersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual value of Chromatic Dispersion.
UNITS:ps/nm
"
::= { tdcEntry 15 }
tdcCdRangeMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum of supported chromatic dispersion.
UNITS:ps/nm
"
::= { tdcEntry 16 }
tdcCdRangeMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum of supported chromatic dispersion.
UNITS:ps/nm
"
::= { tdcEntry 17 }
inventory OBJECT IDENTIFIER ::= { equipment 12 }
inventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF InventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { inventory 1 }
inventoryEntry OBJECT-TYPE
SYNTAX InventoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inventoryTable"
INDEX { inventoryEquipmentType,inventoryShelfId,inventorySlotId,inventorySubslotId,inventoryPortId }
::= { inventoryTable 1 }
InventoryEntry ::=
SEQUENCE {
inventoryEquipmentType INTEGER,
inventoryShelfId CoriantTypesShelfId,
inventorySlotId CoriantTypesSlotId,
inventorySubslotId CoriantTypesSlotId,
inventoryPortId CoriantTypesPortId,
inventoryEquipmentVersion OCTET STRING,
inventoryModuleType OCTET STRING,
inventoryVendor OCTET STRING,
inventorySerialNumber OCTET STRING,
inventoryFwVersion OCTET STRING,
inventoryPartNumber OCTET STRING,
inventoryClei OCTET STRING,
inventoryInterfaceType OCTET STRING,
inventoryManufactureDate OCTET STRING,
inventoryManufacturerNumber OCTET STRING
}
inventoryEquipmentType OBJECT-TYPE
SYNTAX INTEGER {
shelf (1),
slot (2),
card (3),
port (4),
pluggable (5),
subslot (6),
subcard (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The equipment type that the inventory data refers to
"
::= { inventoryEntry 1 }
inventoryShelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the shelf.
"
::= { inventoryEntry 2 }
inventorySlotId OBJECT-TYPE
SYNTAX CoriantTypesSlotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the slot.
"
::= { inventoryEntry 3 }
inventorySubslotId OBJECT-TYPE
SYNTAX CoriantTypesSlotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the subslot.
"
::= { inventoryEntry 4 }
inventoryPortId OBJECT-TYPE
SYNTAX CoriantTypesPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the port.
"
::= { inventoryEntry 5 }
inventoryEquipmentVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The attribute Identifies the Hardware Version of the module that populates the slot.
"
::= { inventoryEntry 6 }
inventoryModuleType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the value of module type stored in EEPROM of the equipment.
"
::= { inventoryEntry 7 }
inventoryVendor OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Vendor information.
"
::= { inventoryEntry 8 }
inventorySerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the value of serial number stored in EEPROM of the equipment.
"
::= { inventoryEntry 9 }
inventoryFwVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Firmware (FW) version on the equipment.
"
::= { inventoryEntry 10 }
inventoryPartNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the Part Number of the equipment.
"
::= { inventoryEntry 11 }
inventoryClei OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifies the CLEI code number of the equipment.
The CLEI code is a 10-character code that identifies
communications equipment. It describes product type, features,
source document, and associated drawings and vintages.
CLEI codes have 4 data elements:
- Characters 1 to 4: Define family or subfamily of product.
- Characters 5 to 7: Define features.
- Character 8: Manufacturer and System ID.
- Characters 9 and 10: Identifies version, issue, and release #.
"
::= { inventoryEntry 12 }
inventoryInterfaceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating interface type of the pluggable.
default value :"
::= { inventoryEntry 13 }
inventoryManufactureDate OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The equipment manufacture date get from equipment.
format is mm/dd/yyyy. When there is no date information show nothing
Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = 'subcard') or (../equipment-type = 'pluggable')
default value :"
::= { inventoryEntry 14 }
inventoryManufacturerNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is the value of manufacturer number stored in EEPROM of the equipment.
"
::= { inventoryEntry 16 }
led OBJECT IDENTIFIER ::= { equipment 14 }
ledTable OBJECT-TYPE
SYNTAX SEQUENCE OF LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Attributes related with LED
Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI.
"
::= { led 1 }
ledEntry OBJECT-TYPE
SYNTAX LedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ledTable"
INDEX { ledEquipmentType,ledShelfId,ledSlotId,ledSubslotId,ledName }
::= { ledTable 1 }
LedEntry ::=
SEQUENCE {
ledEquipmentType OCTET STRING,
ledShelfId CoriantTypesShelfId,
ledSlotId CoriantTypesSlotId,
ledName OCTET STRING,
ledStatus INTEGER,
ledSubslotId CoriantTypesSubslotId
}
ledEquipmentType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute indicates the equipment type to identify the module.
for example, if the card is CHM1, 'CHM1' shall be used.
DCI supporting LEDs:
CHM1, CHM2, SHELF, FAN
"
::= { ledEntry 1 }
ledShelfId OBJECT-TYPE
SYNTAX CoriantTypesShelfId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the shelf.
"
::= { ledEntry 2 }
ledSlotId OBJECT-TYPE
SYNTAX CoriantTypesSlotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the slot.
"
::= { ledEntry 3 }
ledName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The functional name of LED.
DCI NE:
location_led
port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12)
active_led
power_led
fault_led
status_led
subslot(n)_led
"
::= { ledEntry 4 }
ledStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (1),
off (2),
blink (3),
red (4),
redBlink (5),
green (6),
greenBlink (7),
amber (8),
amberBlink (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Current LED status.
DCI NE:
For Location_LED: OFF, BLINK
For others:
red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable
"
::= { ledEntry 5 }
ledSubslotId OBJECT-TYPE
SYNTAX CoriantTypesSubslotId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Identifier of the subslot.
"
::= { ledEntry 6 }
temperatureDetails OBJECT IDENTIFIER ::= { equipment 15 }
temperatureDetailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TemperatureDetailsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The detailed information of temperature in each monitoring-point of current module"
::= { temperatureDetails 1 }
temperatureDetailsEntry OBJECT-TYPE
SYNTAX TemperatureDetailsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of temperatureDetailsTable"
INDEX { shelfId,slotId,temperatureDetailsMonitoringPoint }
::= { temperatureDetailsTable 1 }
TemperatureDetailsEntry ::=
SEQUENCE {
temperatureDetailsMonitoringPoint OCTET STRING,
temperatureDetailsTemperature CoriantTypesTemperature,
temperatureDetailsTemperatureRangeLow CoriantTypesTemperature,
temperatureDetailsTemperatureRangeHigh CoriantTypesTemperature
}
temperatureDetailsMonitoringPoint OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The point of temperature monitoring. It could be the sensor or chip internal.
"
::= { temperatureDetailsEntry 1 }
temperatureDetailsTemperature OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature at the monitoring point.
"
::= { temperatureDetailsEntry 2 }
temperatureDetailsTemperatureRangeLow OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The lowest temperature threshold of this monitoring point in working mode.
"
::= { temperatureDetailsEntry 3 }
temperatureDetailsTemperatureRangeHigh OBJECT-TYPE
SYNTAX CoriantTypesTemperature
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The highest temperature threshold of this monitoring point in working mode.
"
::= { temperatureDetailsEntry 4 }
otdr OBJECT IDENTIFIER ::= { equipment 16 }
otdrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OtdrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Container of OTDR."
::= { otdr 1 }
otdrEntry OBJECT-TYPE
SYNTAX OtdrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otdrTable"
INDEX { shelfId,slotId,subslotId }
::= { otdrTable 1 }
OtdrEntry ::=
SEQUENCE {
otdrState INTEGER,
otdrMeasurementTime Unsigned32,
otdrError OCTET STRING,
otdrLaserStatus INTEGER,
otdrMeasurementPort Unsigned32
}
otdrState OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (0),
idle (1),
measuring (2),
finished (3),
fail (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating the current status of the OTDR.
default value :not-available"
::= { otdrEntry 1 }
otdrMeasurementTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating the time remaining in current measurement running.
UNITS:second
default value :0"
::= { otdrEntry 2 }
otdrError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Error message produced when the measurement ends with error.
"
::= { otdrEntry 3 }
otdrLaserStatus OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (0),
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating the current status of the OTDR laser.
default value :not-available"
::= { otdrEntry 4 }
otdrMeasurementPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "0 indicates that the card is not measuring any port;
non-zero indicates the OTDR port number where a measurement is currently taking place.
default value :0"
::= { otdrEntry 5 }
otdrPort OBJECT IDENTIFIER ::= { equipment 18 }
otdrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF OtdrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Containing attributes of OTDR port."
::= { otdrPort 1 }
otdrPortEntry OBJECT-TYPE
SYNTAX OtdrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otdrPortTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otdrPortTable 1 }
OtdrPortEntry ::=
SEQUENCE {
otdrPortOtdrRange OtdrOtdrRange,
otdrPortOtdrPulseWidth OtdrOtdrPulseWidth,
otdrPortOtdrMeasurementSpeed INTEGER,
otdrPortOtdrIor OtdrOtdrIor,
otdrPortOtdrFiberType INTEGER,
otdrPortOtdrLastMeasurement IetfYangTypesDateAndTime,
otdrPortOtdrResolution OCTET STRING,
otdrPortLaunchingFiberLength OCTET STRING
}
otdrPortOtdrRange OBJECT-TYPE
SYNTAX OtdrOtdrRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION " OTDR measurement range.
UNITS:km
default value :auto"
::= { otdrPortEntry 1 }
otdrPortOtdrPulseWidth OBJECT-TYPE
SYNTAX OtdrOtdrPulseWidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates pulse width to be used in otdr measurement.
UNITS:nano-second
default value :auto"
::= { otdrPortEntry 2 }
otdrPortOtdrMeasurementSpeed OBJECT-TYPE
SYNTAX INTEGER {
fast (1),
medium (3),
slow (4),
precision (5),
auto (6),
highPrecision (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating OTDR measurement speed.
default value :auto"
::= { otdrPortEntry 3 }
otdrPortOtdrIor OBJECT-TYPE
SYNTAX OtdrOtdrIor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the group index of refraction (IOR) of the fiber to be measured.
default value :auto"
::= { otdrPortEntry 4 }
otdrPortOtdrFiberType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
ssmf (1),
leaf (2),
twrs (3),
twc (4),
allwave (5),
dsf (6),
ls (7),
puresilica (8),
twreach (9),
vistacor (10),
teralight (11),
drakall (12),
twplus (13),
twminus (14),
pslc (15),
auto (16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating fiber type to be measured.
default value :auto"
::= { otdrPortEntry 5 }
otdrPortOtdrLastMeasurement OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the last otdr measurement date and time on the port.
default value :0000-01-01T00:00:00.00Z"
::= { otdrPortEntry 6 }
otdrPortOtdrResolution OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the OTDR data sampling resolution.
UNITS:meter
default value :auto"
::= { otdrPortEntry 7 }
otdrPortLaunchingFiberLength OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The launching fiber length information for SOR to filter the launching fiber path data
UNITS:km
default value :0"
::= { otdrPortEntry 8 }
ops OBJECT IDENTIFIER ::= { equipment 20 }
opsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of optical protection switch (ops) on an equipment."
::= { ops 1 }
opsEntry OBJECT-TYPE
SYNTAX OpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of opsTable"
INDEX { shelfId,slotId,subslotId,opsName }
::= { opsTable 1 }
OpsEntry ::=
SEQUENCE {
opsName CoriantTypesNameIdentifier,
opsWorkingEntity RowPointer,
opsProtectionEntity RowPointer,
opsAdminStatus INTEGER,
opsOperStatus INTEGER,
opsAvailStatus BITS,
opsAliasName OCTET STRING,
opsProtectionStatus INTEGER,
opsActivePath INTEGER,
opsRevertive CoriantTypesYesNo,
opsWaitToRestore Unsigned32,
opsWorkingSwitchThreshold CoriantTypesOpticalPower,
opsProtectionSwitchThreshold CoriantTypesOpticalPower,
opsWorkingLosThreshold CoriantTypesOpticalPower,
opsProtectionLosThreshold CoriantTypesOpticalPower,
opsHoldoffTimer Unsigned32,
opsWavelengthBand INTEGER,
opsFrequency CoriantTypesFreq,
opsWorkingProtectionRelativeThreshold CoriantTypesOpticalDB,
opsRelativeThresholdHysteresis CoriantTypesOpticalDB,
opsRelativeThresholdOffset CoriantTypesOpticalDB
}
opsName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name assigned to identify a specific ops in the device
"
::= { opsEntry 1 }
opsWorkingEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the working port of the OPS.
"
::= { opsEntry 2 }
opsProtectionEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of the protection port of the OPS
"
::= { opsEntry 3 }
opsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { opsEntry 4 }
opsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { opsEntry 5 }
opsAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { opsEntry 6 }
opsAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { opsEntry 7 }
opsProtectionStatus OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
manualSwitchToProtection (1),
manualSwitchToWorking (2),
forceSwitchToProtection (3),
forceSwitchToWorking (4),
lockoutOfProtection (5),
signalFailureOnWorking (6),
signalFailureOnProtection (7),
signalDegradeOnWorking (8),
signalDegradeOnProtection (9),
doNotRevert (10),
noRequest (11),
waitToRestore (12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the status of the protection switch.
"
::= { opsEntry 8 }
opsActivePath OBJECT-TYPE
SYNTAX INTEGER {
working (1),
protection (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the active port of the protection switch.
default value :unknown"
::= { opsEntry 9 }
opsRevertive OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Revertive behavior of the aps.
If True, then automatically revert after protection switch
once the fault is restored.
default value :no"
::= { opsEntry 10 }
opsWaitToRestore OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately,
after expiration of the timer, the working is restored and a norequest state is transmitted.
UNITS:second
default value :300"
::= { opsEntry 11 }
opsWorkingSwitchThreshold OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching threshold of the working port which indicates the optical power threshold of signal degrade.
default value :-18.0"
::= { opsEntry 12 }
opsProtectionSwitchThreshold OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching threshold of the protection port which indicates the optical power threshold of signal degrade.
default value :-18.0"
::= { opsEntry 13 }
opsWorkingLosThreshold OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching threshold of the working port, power level below it will lead to loss of signal.
default value :-23.0"
::= { opsEntry 14 }
opsProtectionLosThreshold OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching threshold of the protection port, power level below it will lead to loss of signal.
default value :-23.0"
::= { opsEntry 15 }
opsHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The hold off time of the protection switch.
UNITS:milliseconds
default value :0"
::= { opsEntry 16 }
opsWavelengthBand OBJECT-TYPE
SYNTAX INTEGER {
t1550 (1),
t1310 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the band of the signal going through the optical protection switch unit.
UNITS:nm
default value :1550"
::= { opsEntry 17 }
opsFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The frequency of optical protection frequency, which will decide the pilot tone modulated on the channel.
UNITS:MHz
default value :0"
::= { opsEntry 18 }
opsWorkingProtectionRelativeThreshold OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specify the threshold of power difference between working path and protection path;
Setting to value 0 to disable the power difference as switch criteria;
Setting to non-zero value indicates the value of power difference between two paths will trigger protection switch.
default value :0"
::= { opsEntry 19 }
opsRelativeThresholdHysteresis OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specify relative threshold hysteresis for clearance of relative threshold crossing failure.
default value :2.0"
::= { opsEntry 20 }
opsRelativeThresholdOffset OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specify relative threshold offset for protection switch per power difference between working and protection,
the offset is the value of (working power - protection power), the offset value will be excluded from power
difference before comparing to relative threshold threshold and its hysteresis.
default value :0.0"
::= { opsEntry 21 }
subportStatistics OBJECT IDENTIFIER ::= { equipment 25 }
subportStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubportStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { subportStatistics 1 }
subportStatisticsEntry OBJECT-TYPE
SYNTAX SubportStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of subportStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { subportStatisticsTable 1 }
SubportStatisticsEntry ::=
SEQUENCE {
subportStatisticsEntryLastClear IetfYangTypesDateAndTime
}
subportStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { subportStatisticsEntry 1 }
portStatistics OBJECT IDENTIFIER ::= { equipment 26 }
portStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { portStatistics 1 }
portStatisticsEntry OBJECT-TYPE
SYNTAX PortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of portStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { portStatisticsTable 1 }
PortStatisticsEntry ::=
SEQUENCE {
portStatisticsEntryLastClear IetfYangTypesDateAndTime
}
portStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { portStatisticsEntry 1 }
subcardStatistics OBJECT IDENTIFIER ::= { equipment 27 }
subcardStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubcardStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { subcardStatistics 1 }
subcardStatisticsEntry OBJECT-TYPE
SYNTAX SubcardStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of subcardStatisticsTable"
INDEX { shelfId,slotId,subslotId }
::= { subcardStatisticsTable 1 }
SubcardStatisticsEntry ::=
SEQUENCE {
subcardStatisticsEntryLastClear IetfYangTypesDateAndTime
}
subcardStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { subcardStatisticsEntry 1 }
cardStatistics OBJECT IDENTIFIER ::= { equipment 28 }
cardStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CardStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { cardStatistics 1 }
cardStatisticsEntry OBJECT-TYPE
SYNTAX CardStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cardStatisticsTable"
INDEX { shelfId,slotId }
::= { cardStatisticsTable 1 }
CardStatisticsEntry ::=
SEQUENCE {
cardStatisticsEntryLastClear IetfYangTypesDateAndTime
}
cardStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { cardStatisticsEntry 1 }
shelfStatistics OBJECT IDENTIFIER ::= { equipment 29 }
shelfStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { shelfStatistics 1 }
shelfStatisticsEntry OBJECT-TYPE
SYNTAX ShelfStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of shelfStatisticsTable"
INDEX { shelfId }
::= { shelfStatisticsTable 1 }
ShelfStatisticsEntry ::=
SEQUENCE {
shelfStatisticsEntryLastClear IetfYangTypesDateAndTime
}
shelfStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { shelfStatisticsEntry 1 }
ocmPort OBJECT IDENTIFIER ::= { equipment 30 }
ocmPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF OcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Containing attributes of OCM port."
::= { ocmPort 1 }
ocmPortEntry OBJECT-TYPE
SYNTAX OcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ocmPortTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { ocmPortTable 1 }
OcmPortEntry ::=
SEQUENCE {
ocmPortEnable CoriantTypesEnableSwitch,
ocmPortGridMode CoriantTypesGridType,
ocmPortOpticalPowerOffset CoriantTypesOpticalDB,
ocmPortChannelBaudRate INTEGER,
ocmPortPpa1dBBW Unsigned32
}
ocmPortEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable or disable the function of ocm port measurement.
default value :disabled"
::= { ocmPortEntry 1 }
ocmPortGridMode OBJECT-TYPE
SYNTAX CoriantTypesGridType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates Grid type of the OMS.
default value :fixed_50G_96ch"
::= { ocmPortEntry 2 }
ocmPortOpticalPowerOffset OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The offset to calibrate Optical power of monitored channels, resulted value = monitored value + offset.
"
::= { ocmPortEntry 4 }
ocmPortChannelBaudRate OBJECT-TYPE
SYNTAX INTEGER {
low (1),
high (2),
userDefined (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate selection for monitored optical channel
default value :user-defined"
::= { ocmPortEntry 5 }
ocmPortPpa1dBBW OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The channel baud rate with 1dB bandwidth working for user-defined channel-baud-rate
UNITS:GHz
"
::= { ocmPortEntry 6 }
monitoredChannels OBJECT IDENTIFIER ::= { equipment 31 }
monitoredChannelsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitoredChannelsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of monitored channels"
::= { monitoredChannels 1 }
monitoredChannelsEntry OBJECT-TYPE
SYNTAX MonitoredChannelsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of monitoredChannelsTable"
INDEX { shelfId,slotId,subslotId,portId,monitoredChannelsFrequencyIndex }
::= { monitoredChannelsTable 1 }
MonitoredChannelsEntry ::=
SEQUENCE {
monitoredChannelsFrequencyIndex CoriantTypesFreq,
monitoredChannelsMonitoredCenterFrequency CoriantTypesFreq,
monitoredChannelsMonitoredOpticalPower CoriantTypesOpticalPower,
monitoredChannelsMonitoredWidth CoriantTypesFreqRoadm
}
monitoredChannelsFrequencyIndex OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Nominal center frequency as index with unit of MHz.
"
::= { monitoredChannelsEntry 1 }
monitoredChannelsMonitoredCenterFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored channel center frequency.
"
::= { monitoredChannelsEntry 2 }
monitoredChannelsMonitoredOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored channel optical power.
"
::= { monitoredChannelsEntry 3 }
monitoredChannelsMonitoredWidth OBJECT-TYPE
SYNTAX CoriantTypesFreqRoadm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitored frequency width with unit MHz.
default value :not-available"
::= { monitoredChannelsEntry 4 }
qsfpSignalIntegrity OBJECT IDENTIFIER ::= { equipment 32 }
qsfpSignalIntegrityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QsfpSignalIntegrityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Container for QSFP or QSFPxx signal integrity parameters defined in SFF-8636 ."
::= { qsfpSignalIntegrity 1 }
qsfpSignalIntegrityEntry OBJECT-TYPE
SYNTAX QsfpSignalIntegrityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of qsfpSignalIntegrityTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { qsfpSignalIntegrityTable 1 }
QsfpSignalIntegrityEntry ::=
SEQUENCE {
qsfpSignalIntegrityTxInputEqFixedManualControlImpl QsfpSignalIntegritySignalVal,
qsfpSignalIntegrityRxOutputEqPrecursorControlImpl QsfpSignalIntegritySignalVal,
qsfpSignalIntegrityRxOutputEqPostcursorControlImpl QsfpSignalIntegritySignalVal,
qsfpSignalIntegrityRxOutputAmplitudeControlImpl QsfpSignalIntegritySignalVal
}
qsfpSignalIntegrityTxInputEqFixedManualControlImpl OBJECT-TYPE
SYNTAX QsfpSignalIntegritySignalVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates implementation status of Tx side input fixed manual equalization control.
"
::= { qsfpSignalIntegrityEntry 1 }
qsfpSignalIntegrityRxOutputEqPrecursorControlImpl OBJECT-TYPE
SYNTAX QsfpSignalIntegritySignalVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates implementation status of Rx side output pre-cursor equalization control.
"
::= { qsfpSignalIntegrityEntry 2 }
qsfpSignalIntegrityRxOutputEqPostcursorControlImpl OBJECT-TYPE
SYNTAX QsfpSignalIntegritySignalVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates implementation status of Rx side output post-cursor equalization control.
"
::= { qsfpSignalIntegrityEntry 3 }
qsfpSignalIntegrityRxOutputAmplitudeControlImpl OBJECT-TYPE
SYNTAX QsfpSignalIntegritySignalVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates implementation status of Rx side output amplitude control.
"
::= { qsfpSignalIntegrityEntry 4 }
qsfpSignalIntegrityLane OBJECT IDENTIFIER ::= { equipment 33 }
qsfpSignalIntegrityLaneTable OBJECT-TYPE
SYNTAX SEQUENCE OF QsfpSignalIntegrityLaneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of qspf lane signal integrity."
::= { qsfpSignalIntegrityLane 1 }
qsfpSignalIntegrityLaneEntry OBJECT-TYPE
SYNTAX QsfpSignalIntegrityLaneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of qsfpSignalIntegrityLaneTable"
INDEX { shelfId,slotId,subslotId,portId,qsfpSignalIntegrityLaneLaneId }
::= { qsfpSignalIntegrityLaneTable 1 }
QsfpSignalIntegrityLaneEntry ::=
SEQUENCE {
qsfpSignalIntegrityLaneLaneId Unsigned32,
qsfpSignalIntegrityLaneTxInputEqFixedManualControl QsfpSignalIntegrityControlVal,
qsfpSignalIntegrityLaneTxInputEqAdaptiveControl QsfpSignalIntegritySignalVal,
qsfpSignalIntegrityLaneRxOutputEqPrecursorControl QsfpSignalIntegrityControlVal,
qsfpSignalIntegrityLaneRxOutputEqPostcursorControl QsfpSignalIntegrityControlVal,
qsfpSignalIntegrityLaneRxOutputAmplitudeControl INTEGER
}
qsfpSignalIntegrityLaneLaneId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Id of pluggable lane.
"
::= { qsfpSignalIntegrityLaneEntry 1 }
qsfpSignalIntegrityLaneTxInputEqFixedManualControl OBJECT-TYPE
SYNTAX QsfpSignalIntegrityControlVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fixed manual equalization value of Tx side input for the lane.
UNITS:dB
default value :n/a"
::= { qsfpSignalIntegrityLaneEntry 2 }
qsfpSignalIntegrityLaneTxInputEqAdaptiveControl OBJECT-TYPE
SYNTAX QsfpSignalIntegritySignalVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Adaptive equalization control of Tx side input for Tx 1-4.
"
::= { qsfpSignalIntegrityLaneEntry 3 }
qsfpSignalIntegrityLaneRxOutputEqPrecursorControl OBJECT-TYPE
SYNTAX QsfpSignalIntegrityControlVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx side output pre-cursor equalization values for Rx 1-4.
UNITS:dB
default value :n/a"
::= { qsfpSignalIntegrityLaneEntry 4 }
qsfpSignalIntegrityLaneRxOutputEqPostcursorControl OBJECT-TYPE
SYNTAX QsfpSignalIntegrityControlVal
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx side output post-cursor equalization values for Rx 1-4.
UNITS:dB
default value :n/a"
::= { qsfpSignalIntegrityLaneEntry 5 }
qsfpSignalIntegrityLaneRxOutputAmplitudeControl OBJECT-TYPE
SYNTAX INTEGER {
nA (0),
t100400mv (1),
t300600mv (2),
t400800mv (3),
t6001200mv (4),
notDefined (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rx side output amplitude values for Rx 1-4.
default value :n/a"
::= { qsfpSignalIntegrityLaneEntry 6 }
opticalPowerLane OBJECT IDENTIFIER ::= { equipment 34 }
opticalPowerLaneTable OBJECT-TYPE
SYNTAX SEQUENCE OF OpticalPowerLaneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { opticalPowerLane 1 }
opticalPowerLaneEntry OBJECT-TYPE
SYNTAX OpticalPowerLaneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of opticalPowerLaneTable"
INDEX { shelfId,slotId,subslotId,portId,opticalPowerLaneLaneId }
::= { opticalPowerLaneTable 1 }
OpticalPowerLaneEntry ::=
SEQUENCE {
opticalPowerLaneLaneId Unsigned32,
opticalPowerLaneRxOpticalPower CoriantTypesOpticalPower,
opticalPowerLaneTxOpticalPower CoriantTypesOpticalPower
}
opticalPowerLaneLaneId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The physical lane index for optical pluggable
"
::= { opticalPowerLaneEntry 1 }
opticalPowerLaneRxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
"
::= { opticalPowerLaneEntry 2 }
opticalPowerLaneTxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
"
::= { opticalPowerLaneEntry 3 }
cpuState OBJECT IDENTIFIER ::= { equipment 35 }
cpuStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The module with CPU's utilization states"
::= { cpuState 1 }
cpuStateEntry OBJECT-TYPE
SYNTAX CpuStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cpuStateTable"
INDEX { shelfId,slotId }
::= { cpuStateTable 1 }
CpuStateEntry ::=
SEQUENCE {
cpuStateCpuTotalUtilization CoriantTypesPercentagePrecision2
}
cpuStateCpuTotalUtilization OBJECT-TYPE
SYNTAX CoriantTypesPercentagePrecision2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total CPUs' utilization
"
::= { cpuStateEntry 1 }
perCoreUtilization OBJECT IDENTIFIER ::= { equipment 36 }
perCoreUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PerCoreUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each CPU core's utilization"
::= { perCoreUtilization 1 }
perCoreUtilizationEntry OBJECT-TYPE
SYNTAX PerCoreUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of perCoreUtilizationTable"
INDEX { shelfId,slotId,perCoreUtilizationCoreIndex }
::= { perCoreUtilizationTable 1 }
PerCoreUtilizationEntry ::=
SEQUENCE {
perCoreUtilizationCoreIndex Unsigned32,
perCoreUtilizationUtilization CoriantTypesPercentagePrecision2
}
perCoreUtilizationCoreIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of the CPU core
"
::= { perCoreUtilizationEntry 1 }
perCoreUtilizationUtilization OBJECT-TYPE
SYNTAX CoriantTypesPercentagePrecision2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The utilization of current CPU core
"
::= { perCoreUtilizationEntry 2 }
memoryState OBJECT IDENTIFIER ::= { equipment 37 }
memoryStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF MemoryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "For module that have associated memory, these values
report information about available and utilized memory"
::= { memoryState 1 }
memoryStateEntry OBJECT-TYPE
SYNTAX MemoryStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of memoryStateTable"
INDEX { shelfId,slotId }
::= { memoryStateTable 1 }
MemoryStateEntry ::=
SEQUENCE {
memoryStateAvailable OCTET STRING,
memoryStateUtilized OCTET STRING
}
memoryStateAvailable OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The available memory physically installed, or logically allocated to the module.
UNITS:bytes
"
::= { memoryStateEntry 1 }
memoryStateUtilized OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The memory currently in use by processes running on the module, not considering reserved memory that is not available for use.
UNITS:bytes
"
::= { memoryStateEntry 2 }
channelStates OBJECT IDENTIFIER ::= { equipment 38 }
channelStatesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChannelStatesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { channelStates 1 }
channelStatesEntry OBJECT-TYPE
SYNTAX ChannelStatesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of channelStatesTable"
INDEX { shelfId,slotId,subslotId,portId,channelStatesChannelId }
::= { channelStatesTable 1 }
ChannelStatesEntry ::=
SEQUENCE {
channelStatesChannelId Unsigned32,
channelStatesLaserBiasCurrent OCTET STRING
}
channelStatesChannelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "multi channel pluggable's channel id
"
::= { channelStatesEntry 1 }
channelStatesLaserBiasCurrent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The current applied by the system to the transmit laser to
achieve the output power. The current is expressed in mA
with up to two decimal precision. Just supply the instant value
UNITS:mA
"
::= { channelStatesEntry 2 }
diagnosticAlarmThresholds OBJECT IDENTIFIER ::= { equipment 39 }
diagnosticAlarmThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiagnosticAlarmThresholdsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { diagnosticAlarmThresholds 1 }
diagnosticAlarmThresholdsEntry OBJECT-TYPE
SYNTAX DiagnosticAlarmThresholdsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of diagnosticAlarmThresholdsTable"
INDEX { shelfId,slotId,subslotId,portId,diagnosticAlarmThresholdsDiagnosticParameter }
::= { diagnosticAlarmThresholdsTable 1 }
DiagnosticAlarmThresholdsEntry ::=
SEQUENCE {
diagnosticAlarmThresholdsDiagnosticParameter INTEGER,
diagnosticAlarmThresholdsParameterUnits INTEGER,
diagnosticAlarmThresholdsHighThreshold OCTET STRING,
diagnosticAlarmThresholdsLowThreshold OCTET STRING
}
diagnosticAlarmThresholdsDiagnosticParameter OBJECT-TYPE
SYNTAX INTEGER {
temperature (1),
voltage (2),
laserBias (3),
laneRxPower (4),
laneTxPower (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The diagnostic parameter for pluggable
which support alarm by threshold
"
::= { diagnosticAlarmThresholdsEntry 1 }
diagnosticAlarmThresholdsParameterUnits OBJECT-TYPE
SYNTAX INTEGER {
celsius (1),
v (2),
ma (3),
dbm (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { diagnosticAlarmThresholdsEntry 2 }
diagnosticAlarmThresholdsHighThreshold OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The high alarm threshold of this parameter
"
::= { diagnosticAlarmThresholdsEntry 3 }
diagnosticAlarmThresholdsLowThreshold OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The low alarm threshold of this parameter
"
::= { diagnosticAlarmThresholdsEntry 4 }
supportedGainRange OBJECT IDENTIFIER ::= { equipment 40 }
supportedGainRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SupportedGainRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { supportedGainRange 1 }
supportedGainRangeEntry OBJECT-TYPE
SYNTAX SupportedGainRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of supportedGainRangeTable"
INDEX { shelfId,slotId,subslotId,amplifierName,supportedGainRangeRangeType }
::= { supportedGainRangeTable 1 }
SupportedGainRangeEntry ::=
SEQUENCE {
supportedGainRangeRangeType AmplifierGainRangeType,
supportedGainRangeGainRangeMin CoriantTypesDBPrecision1,
supportedGainRangeGainRangeMax CoriantTypesDBPrecision1
}
supportedGainRangeRangeType OBJECT-TYPE
SYNTAX AmplifierGainRangeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of gain range for manually setting
"
::= { supportedGainRangeEntry 1 }
supportedGainRangeGainRangeMin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum of settable gain for this range type
"
::= { supportedGainRangeEntry 2 }
supportedGainRangeGainRangeMax OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maxmum of settable gain for this range type
"
::= { supportedGainRangeEntry 3 }
channelDataList OBJECT IDENTIFIER ::= { equipment 41 }
channelDataListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChannelDataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Per channel data for PCL restore."
::= { channelDataList 1 }
channelDataListEntry OBJECT-TYPE
SYNTAX ChannelDataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of channelDataListTable"
INDEX { shelfId,slotId,subslotId,amplifierName,channelDataListIndexId }
::= { channelDataListTable 1 }
ChannelDataListEntry ::=
SEQUENCE {
channelDataListIndexId Unsigned32,
channelDataListChannleId Unsigned32,
channelDataListChannlePower INTEGER
}
channelDataListIndexId OBJECT-TYPE
SYNTAX Unsigned32 (0..135)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integer ID of the channel-data.
"
::= { channelDataListEntry 1 }
channelDataListChannleId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channle id.
default value :0"
::= { channelDataListEntry 2 }
channelDataListChannlePower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channle power.
default value :0"
::= { channelDataListEntry 3 }
tlmStatisticsdata OBJECT IDENTIFIER ::= { equipment 43 }
tlmStatisticsdataTable OBJECT-TYPE
SYNTAX SEQUENCE OF TlmStatisticsdataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { tlmStatisticsdata 1 }
tlmStatisticsdataEntry OBJECT-TYPE
SYNTAX TlmStatisticsdataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of tlmStatisticsdataTable"
INDEX { shelfId }
::= { tlmStatisticsdataTable 1 }
TlmStatisticsdataEntry ::=
SEQUENCE {
tlmStatisticsdataRefreshCounter Unsigned32,
tlmStatisticsdataValidNum Unsigned32
}
tlmStatisticsdataRefreshCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "count refreshed times.
default value :0"
::= { tlmStatisticsdataEntry 1 }
tlmStatisticsdataValidNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of valid data list.
default value :0"
::= { tlmStatisticsdataEntry 2 }
tlmStatisticsdataList OBJECT IDENTIFIER ::= { equipment 44 }
tlmStatisticsdataListTable OBJECT-TYPE
SYNTAX SEQUENCE OF TlmStatisticsdataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { tlmStatisticsdataList 1 }
tlmStatisticsdataListEntry OBJECT-TYPE
SYNTAX TlmStatisticsdataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of tlmStatisticsdataListTable"
INDEX { shelfId }
::= { tlmStatisticsdataListTable 1 }
TlmStatisticsdataListEntry ::=
SEQUENCE {
tlmStatisticsdataListValidNum Unsigned32
}
tlmStatisticsdataListValidNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of valid data list.
default value :0"
::= { tlmStatisticsdataListEntry 1 }
services OBJECT IDENTIFIER ::= { groove 4 }
otn OBJECT IDENTIFIER ::= { services 1 }
eth10g OBJECT IDENTIFIER ::= { otn 1 }
eth10gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth10gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the 10GBE object.
"
::= { eth10g 1 }
eth10gEntry OBJECT-TYPE
SYNTAX Eth10gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth10gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth10gTable 1 }
Eth10gEntry ::=
SEQUENCE {
eth10gEthFecType CoriantTypesEthFec,
eth10gEthFecTypeState CoriantTypesEthFec,
eth10gTransmitInterpacketgap Unsigned32,
eth10gGfpPayloadFcs CoriantTypesEnableSwitch,
eth10gMappingMode INTEGER,
eth10gAdminStatus INTEGER,
eth10gOperStatus INTEGER,
eth10gAvailStatus BITS,
eth10gAliasName OCTET STRING,
eth10gClientShutdown CoriantTypesYesNo,
eth10gClientShutdownHoldoffTimer Unsigned32,
eth10gNearEndAls CoriantTypesYesNo,
eth10gAlsDegradeMode CoriantTypesEnableSwitch,
eth10gLoopbackEnable CoriantTypesEnableSwitch,
eth10gLoopbackType INTEGER,
eth10gTestSignalType CoriantTypesTestSignalType,
eth10gTestSignalEnable CoriantTypesTestSignalConfig,
eth10gServiceLabel OCTET STRING,
eth10gLldpStatusIf INTEGER,
eth10gUpiValue INTEGER,
eth10gHoldoffSignal CoriantTypesYesNo,
eth10gManagedBy INTEGER
}
eth10gEthFecType OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working type of etyn port.
default value :auto"
::= { eth10gEntry 1 }
eth10gEthFecTypeState OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working state of etyn port.
default value :disabled"
::= { eth10gEntry 2 }
eth10gTransmitInterpacketgap OBJECT-TYPE
SYNTAX Unsigned32 (8..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the minimum transmit IPG value.
default value :8"
::= { eth10gEntry 3 }
eth10gGfpPayloadFcs OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
default value :disabled"
::= { eth10gEntry 4 }
eth10gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { eth10gEntry 5 }
eth10gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { eth10gEntry 6 }
eth10gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { eth10gEntry 7 }
eth10gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { eth10gEntry 8 }
eth10gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { eth10gEntry 9 }
eth10gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { eth10gEntry 10 }
eth10gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { eth10gEntry 11 }
eth10gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { eth10gEntry 12 }
eth10gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { eth10gEntry 13 }
eth10gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { eth10gEntry 14 }
eth10gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { eth10gEntry 15 }
eth10gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { eth10gEntry 16 }
eth10gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { eth10gEntry 17 }
eth10gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { eth10gEntry 18 }
eth10gLldpStatusIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rxonly (2),
txandrx (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled"
::= { eth10gEntry 19 }
eth10gUpiValue OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
g709 (1),
gsupp43 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The value of ODU2 upi in PREAMBLE mapping mode.
default value :not-applicable"
::= { eth10gEntry 20 }
eth10gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { eth10gEntry 21 }
eth10gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { eth10gEntry 22 }
testSignalFacilityStatus OBJECT IDENTIFIER ::= { otn 2 }
testSignalFacilityStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TestSignalFacilityStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Test signal status for current facility."
::= { testSignalFacilityStatus 1 }
testSignalFacilityStatusEntry OBJECT-TYPE
SYNTAX TestSignalFacilityStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of testSignalFacilityStatusTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { testSignalFacilityStatusTable 1 }
TestSignalFacilityStatusEntry ::=
SEQUENCE {
testSignalFacilityStatusPrbsSync INTEGER,
testSignalFacilityStatusTestTimeDuration Unsigned32,
testSignalFacilityStatusPrbsBitErrorCount IetfYangTypesGauge64
}
testSignalFacilityStatusPrbsSync OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
inSync (1),
outSync (2),
errSync (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The test result of PRBS Synchronization
default value :not-applicable"
::= { testSignalFacilityStatusEntry 1 }
testSignalFacilityStatusTestTimeDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time duration of signal test
UNITS:seconds
"
::= { testSignalFacilityStatusEntry 2 }
testSignalFacilityStatusPrbsBitErrorCount OBJECT-TYPE
SYNTAX IetfYangTypesGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The counting of bit error by PRBS Synchronization
"
::= { testSignalFacilityStatusEntry 3 }
lldpRemoteSystem OBJECT IDENTIFIER ::= { otn 3 }
lldpRemoteSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of LLDP neighbors."
::= { lldpRemoteSystem 1 }
lldpRemoteSystemEntry OBJECT-TYPE
SYNTAX LldpRemoteSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of lldpRemoteSystemTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,lldpRemoteSystemLldpRemoteIndex }
::= { lldpRemoteSystemTable 1 }
LldpRemoteSystemEntry ::=
SEQUENCE {
lldpRemoteSystemLldpRemoteIndex Unsigned32,
lldpRemoteSystemRemoteChassisIdSubtype INTEGER,
lldpRemoteSystemRemoteChassisId OCTET STRING,
lldpRemoteSystemRemotePortIdSubtype INTEGER,
lldpRemoteSystemRemotePortId OCTET STRING,
lldpRemoteSystemRemotePortDesc OCTET STRING,
lldpRemoteSystemRemoteSysName OCTET STRING,
lldpRemoteSystemRemoteSysDesc OCTET STRING,
lldpRemoteSystemRemoteSysCapSupported LldpLldpSysCap,
lldpRemoteSystemRemoteSysCapEnabled LldpLldpSysCap,
lldpRemoteSystemManagementAddress OCTET STRING,
lldpRemoteSystemManagementAddressType Unsigned32
}
lldpRemoteSystemLldpRemoteIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
"
::= { lldpRemoteSystemEntry 1 }
lldpRemoteSystemRemoteChassisIdSubtype OBJECT-TYPE
SYNTAX INTEGER {
chassiscomponent (1),
interfacealias (2),
portcomponent (3),
macaddress (4),
networkaddress (5),
interfacename (6),
local (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the source of a chassis identifier.
The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802-2001.
The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.
The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value.
"
::= { lldpRemoteSystemEntry 2 }
lldpRemoteSystemRemoteChassisId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.
If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component within
the containing chassis.
If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802-2001.
If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.
If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID.
"
::= { lldpRemoteSystemEntry 3 }
lldpRemoteSystemRemotePortIdSubtype OBJECT-TYPE
SYNTAX INTEGER {
interfacealias (1),
portcomponent (2),
macaddress (3),
networkaddress (4),
interfacename (5),
agentcircuitid (6),
local (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies an agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID.
"
::= { lldpRemoteSystemEntry 4 }
lldpRemoteSystemRemotePortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies an agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID.
"
::= { lldpRemoteSystemEntry 5 }
lldpRemoteSystemRemotePortDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The string value used to identify the description of
the given port associated with the remote system.
"
::= { lldpRemoteSystemEntry 6 }
lldpRemoteSystemRemoteSysName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The string value used to identify the system name of the
remote system.
sys-name: system name
"
::= { lldpRemoteSystemEntry 7 }
lldpRemoteSystemRemoteSysDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The string value used to identify the system description
of the remote system.
sys-desc: system description
"
::= { lldpRemoteSystemEntry 8 }
lldpRemoteSystemRemoteSysCapSupported OBJECT-TYPE
SYNTAX LldpLldpSysCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the system capabilities.
The bit 'other(0)' indicates that the system has capabilities
other than those listed below.
The bit 'repeater(1)' indicates that the system has repeater
capability.
The bit 'bridge(2)' indicates that the system has bridge
capability.
The bit 'wlanAccessPoint(3)' indicates that the system has
WLAN access point capability.
The bit 'router(4)' indicates that the system has router
capability.
The bit 'telephone(5)' indicates that the system has telephone
capability.
The bit 'docsisCableDevice(6)' indicates that the system has
DOCSIS Cable Device capability (IETF RFC 2669 & 2670).
The bit 'stationOnly(7)' indicates that the system has only
station capability and nothing else.
The bit 'cVLANComponent(8)' indicates that the system has
C-VLAN component functionality.
The bit 'sVLANComponent(9)' indicates that the system has
S-VLAN component functionality.
The bit 'twoPortMACRelay(10)' indicates that the system has
Two-port MAC Relay (TPMR) functionality.
sys-cap-supported: supported system capability
"
::= { lldpRemoteSystemEntry 9 }
lldpRemoteSystemRemoteSysCapEnabled OBJECT-TYPE
SYNTAX LldpLldpSysCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute describes the system capabilities.
The bit 'other(0)' indicates that the system has capabilities
other than those listed below.
The bit 'repeater(1)' indicates that the system has repeater
capability.
The bit 'bridge(2)' indicates that the system has bridge
capability.
The bit 'wlanAccessPoint(3)' indicates that the system has
WLAN access point capability.
The bit 'router(4)' indicates that the system has router
capability.
The bit 'telephone(5)' indicates that the system has telephone
capability.
The bit 'docsisCableDevice(6)' indicates that the system has
DOCSIS Cable Device capability (IETF RFC 2669 & 2670).
The bit 'stationOnly(7)' indicates that the system has only
station capability and nothing else.
The bit 'cVLANComponent(8)' indicates that the system has
C-VLAN component functionality.
The bit 'sVLANComponent(9)' indicates that the system has
S-VLAN component functionality.
The bit 'twoPortMACRelay(10)' indicates that the system has
Two-port MAC Relay (TPMR) functionality.
"
::= { lldpRemoteSystemEntry 10 }
lldpRemoteSystemManagementAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last reported remote management address
"
::= { lldpRemoteSystemEntry 11 }
lldpRemoteSystemManagementAddressType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last reported remote management address type
"
::= { lldpRemoteSystemEntry 12 }
remoteManAddresses OBJECT IDENTIFIER ::= { otn 4 }
remoteManAddressesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteManAddressesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
List of management addresses of LLDP neighbor.
man:managment, remote management addresses
"
::= { remoteManAddresses 1 }
remoteManAddressesEntry OBJECT-TYPE
SYNTAX RemoteManAddressesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of remoteManAddressesTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,lldpRemoteSystemLldpRemoteIndex,remoteManAddressesRemoteManAddrSubtype,remoteManAddressesRemoteManAddr }
::= { remoteManAddressesTable 1 }
RemoteManAddressesEntry ::=
SEQUENCE {
remoteManAddressesRemoteManAddrSubtype Unsigned32,
remoteManAddressesRemoteManAddr OCTET STRING,
remoteManAddressesRemoteManAddrIfSubtype Unsigned32,
remoteManAddressesRemoteManAddrIfId Unsigned32,
remoteManAddressesRemoteManAddrOid OCTET STRING
}
remoteManAddressesRemoteManAddrSubtype OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.
"
::= { remoteManAddressesEntry 1 }
remoteManAddressesRemoteManAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..62))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.
man: management
addr: address
"
::= { remoteManAddressesEntry 2 }
remoteManAddressesRemoteManAddrIfSubtype OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This attribute describes the basis of a particular type of
interface associated with the management address.
The enumeration 'unknown(1)' represents the case where the
interface is not known.
The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.
The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention.
man: management
addr: address
"
::= { remoteManAddressesEntry 3 }
remoteManAddressesRemoteManAddrIfId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The integer value used to identify the interface number
regarding the management address component associated with
the remote system.
man: management
addr: address
"
::= { remoteManAddressesEntry 4 }
remoteManAddressesRemoteManAddrOid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.
man: management
addr: address
oid: object identifier
"
::= { remoteManAddressesEntry 5 }
odu OBJECT IDENTIFIER ::= { otn 5 }
oduTable OBJECT-TYPE
SYNTAX SEQUENCE OF OduEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { odu 1 }
oduEntry OBJECT-TYPE
SYNTAX OduEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oduTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,odutypeL1,oduidL1,odutypeL2,oduidL2,odutypeL3,oduidL3,odutypeL4,oduidL4 }
::= { oduTable 1 }
OduEntry ::=
SEQUENCE {
odutypeL1 CoriantTypesOduType,
oduidL1 Unsigned32,
odutypeL2 CoriantTypesOduType,
oduidL2 Unsigned32,
odutypeL3 CoriantTypesOduType,
oduidL3 Unsigned32,
odutypeL4 CoriantTypesOduType,
oduidL4 Unsigned32,
oduAdminStatus INTEGER,
oduOperStatus INTEGER,
oduAvailStatus BITS,
oduAliasName OCTET STRING,
oduServiceLabel OCTET STRING,
oduTribSlot CoriantTypesNumberList,
oduRxPayloadType OCTET STRING,
oduTxPayloadType OCTET STRING,
oduNimEnable CoriantTypesEnableSwitch,
oduDelayMeasurementEnable CoriantTypesEnableSwitch,
oduOpuConfigActual INTEGER,
oduClientSignalType INTEGER,
oduExpSapi CoriantTypesTtiType15,
oduExpDapi CoriantTypesTtiType15,
oduExpOperator CoriantTypesTtiType32,
oduTxSapi CoriantTypesTtiType15,
oduTxDapi CoriantTypesTtiType15,
oduTxOperator CoriantTypesTtiType32,
oduTimDefectMode CoriantTypesTimMode,
oduTimAct CoriantTypesEnableSwitch,
oduRxSapi OCTET STRING,
oduRxDapi OCTET STRING,
oduRxOperator OCTET STRING,
oduDegradeInterval Unsigned32,
oduDegradeThreshold Unsigned32,
oduTestSignalType CoriantTypesTestSignalType,
oduTestSignalEnable CoriantTypesTestSignalConfig,
oduTerminationMode INTEGER,
oduType CoriantTypesOduType,
oduManagedBy INTEGER,
oduMsimConfig CoriantTypesEnableSwitch
}
odutypeL1 OBJECT-TYPE
SYNTAX CoriantTypesOduType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Level 1 ODU type
"
::= { oduEntry 1 }
oduidL1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of level 1 ODU
"
::= { oduEntry 2 }
odutypeL2 OBJECT-TYPE
SYNTAX CoriantTypesOduType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Level 2 ODU type
"
::= { oduEntry 3 }
oduidL2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of level 2 ODU
"
::= { oduEntry 4 }
odutypeL3 OBJECT-TYPE
SYNTAX CoriantTypesOduType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Level 3 ODU type
"
::= { oduEntry 5 }
oduidL3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of level 3 ODU
"
::= { oduEntry 6 }
odutypeL4 OBJECT-TYPE
SYNTAX CoriantTypesOduType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Level 4 ODU type
"
::= { oduEntry 7 }
oduidL4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier of level 4 ODU
"
::= { oduEntry 8 }
oduAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { oduEntry 9 }
oduOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { oduEntry 10 }
oduAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { oduEntry 11 }
oduAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oduEntry 12 }
oduServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { oduEntry 13 }
oduTribSlot OBJECT-TYPE
SYNTAX CoriantTypesNumberList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tributary slots of ODU, range 1 to 80
"
::= { oduEntry 14 }
oduRxPayloadType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received payload-type of ODU
"
::= { oduEntry 15 }
oduTxPayloadType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitter payload-type of ODU
"
::= { oduEntry 16 }
oduNimEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of nim function
default value :enabled"
::= { oduEntry 17 }
oduDelayMeasurementEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of delay-measurement function
default value :disabled"
::= { oduEntry 18 }
oduOpuConfigActual OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
intact (1),
client (2),
mux (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual opu configuration type
default value :not-applicable"
::= { oduEntry 19 }
oduClientSignalType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
fc8g (1),
fc16g (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ODUflex rate for special signal type
default value :not-applicable"
::= { oduEntry 20 }
oduExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { oduEntry 21 }
oduExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { oduEntry 22 }
oduExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { oduEntry 23 }
oduTxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { oduEntry 24 }
oduTxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { oduEntry 25 }
oduTxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { oduEntry 26 }
oduTimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { oduEntry 27 }
oduTimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { oduEntry 28 }
oduRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { oduEntry 29 }
oduRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { oduEntry 30 }
oduRxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { oduEntry 31 }
oduDegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { oduEntry 32 }
oduDegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
"
::= { oduEntry 33 }
oduTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { oduEntry 34 }
oduTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { oduEntry 35 }
oduTerminationMode OBJECT-TYPE
SYNTAX INTEGER {
terminated (0),
nonTerminated (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation
default value :terminated"
::= { oduEntry 36 }
oduType OBJECT-TYPE
SYNTAX CoriantTypesOduType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the type of odu
"
::= { oduEntry 37 }
oduManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { oduEntry 38 }
oduMsimConfig OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies msim alarm reporting or not when msi value received not followed G.709 definition
Conditions:../odu-type = 'ODU4'
default value :enabled"
::= { oduEntry 40 }
oduEncryption OBJECT IDENTIFIER ::= { otn 6 }
oduEncryptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF OduEncryptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Encryption function for the ODU channel."
::= { oduEncryption 1 }
oduEncryptionEntry OBJECT-TYPE
SYNTAX OduEncryptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oduEncryptionTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,odutypeL1,oduidL1,odutypeL2,oduidL2,odutypeL3,oduidL3,odutypeL4,oduidL4 }
::= { oduEncryptionTable 1 }
OduEncryptionEntry ::=
SEQUENCE {
oduEncryptionEncryptionEnable INTEGER,
oduEncryptionBlockCipherMode INTEGER,
oduEncryptionEncryptionInterval Unsigned32,
oduEncryptionEncryptionTxStatus CoriantCommonOtnEncryStatusEnum,
oduEncryptionEncryptionRxStatus CoriantCommonOtnEncryStatusEnum,
oduEncryptionOduKeySyncSession CoriantCommonOtnKeySyncSession,
oduEncryptionEncryptionTxChannelId OCTET STRING,
oduEncryptionTimeToNextKey Unsigned32,
oduEncryptionEncryptionTerminationDirection INTEGER
}
oduEncryptionEncryptionEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
enabledNonRevertive (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Setting AES-256 encryption on OTN
default value :disabled"
::= { oduEncryptionEntry 1 }
oduEncryptionBlockCipherMode OBJECT-TYPE
SYNTAX INTEGER {
ctr (1),
gcm (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the block cipher mode of operation.
"
::= { oduEncryptionEntry 2 }
oduEncryptionEncryptionInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..1440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption key rotation interval (in minutes)
UNITS:minutes
default value :30"
::= { oduEncryptionEntry 3 }
oduEncryptionEncryptionTxStatus OBJECT-TYPE
SYNTAX CoriantCommonOtnEncryStatusEnum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption status at transmit side of the ODU,
which reflects the status of both encryption data and communication sessions.
"
::= { oduEncryptionEntry 4 }
oduEncryptionEncryptionRxStatus OBJECT-TYPE
SYNTAX CoriantCommonOtnEncryStatusEnum
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption status at receive side of the ODU,
which reflects the status of both encryption data and communication sessions.
"
::= { oduEncryptionEntry 5 }
oduEncryptionOduKeySyncSession OBJECT-TYPE
SYNTAX CoriantCommonOtnKeySyncSession
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate the associated session for the ODU channel to synchronize keys.
default value :none"
::= { oduEncryptionEntry 6 }
oduEncryptionEncryptionTxChannelId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify channel identifier of the encrypted ODU, which shall be unique within the NE.
"
::= { oduEncryptionEntry 7 }
oduEncryptionTimeToNextKey OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time left to rotate the ODU encryption key.
UNITS:seconds
default value :0"
::= { oduEncryptionEntry 8 }
oduEncryptionEncryptionTerminationDirection OBJECT-TYPE
SYNTAX INTEGER {
physicalPort (1),
crossConnection (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the encryption termination direction.
default value :physical-port"
::= { oduEncryptionEntry 9 }
testSignalStatus OBJECT IDENTIFIER ::= { otn 7 }
testSignalStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TestSignalStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Test signal status on ODU"
::= { testSignalStatus 1 }
testSignalStatusEntry OBJECT-TYPE
SYNTAX TestSignalStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of testSignalStatusTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,odutypeL1,oduidL1,odutypeL2,oduidL2,odutypeL3,oduidL3,odutypeL4,oduidL4 }
::= { testSignalStatusTable 1 }
TestSignalStatusEntry ::=
SEQUENCE {
testSignalStatusPrbsSync INTEGER,
testSignalStatusTestTimeDuration Unsigned32,
testSignalStatusPrbsBitErrorCount IetfYangTypesGauge64
}
testSignalStatusPrbsSync OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
inSync (1),
outSync (2),
errSync (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The test result of PRBS Synchronization
default value :not-applicable"
::= { testSignalStatusEntry 1 }
testSignalStatusTestTimeDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time duration of signal test
UNITS:seconds
"
::= { testSignalStatusEntry 2 }
testSignalStatusPrbsBitErrorCount OBJECT-TYPE
SYNTAX IetfYangTypesGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The counting of bit error by PRBS Synchronization
"
::= { testSignalStatusEntry 3 }
eth40g OBJECT IDENTIFIER ::= { otn 8 }
eth40gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth40gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the 40GBE object.
"
::= { eth40g 1 }
eth40gEntry OBJECT-TYPE
SYNTAX Eth40gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth40gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth40gTable 1 }
Eth40gEntry ::=
SEQUENCE {
eth40gEthFecType CoriantTypesEthFec,
eth40gEthFecTypeState CoriantTypesEthFec,
eth40gTransmitInterpacketgap Unsigned32,
eth40gGfpPayloadFcs CoriantTypesEnableSwitch,
eth40gMappingMode INTEGER,
eth40gAdminStatus INTEGER,
eth40gOperStatus INTEGER,
eth40gAvailStatus BITS,
eth40gAliasName OCTET STRING,
eth40gClientShutdown CoriantTypesYesNo,
eth40gClientShutdownHoldoffTimer Unsigned32,
eth40gNearEndAls CoriantTypesYesNo,
eth40gAlsDegradeMode CoriantTypesEnableSwitch,
eth40gLoopbackEnable CoriantTypesEnableSwitch,
eth40gLoopbackType INTEGER,
eth40gTestSignalType CoriantTypesTestSignalType,
eth40gTestSignalEnable CoriantTypesTestSignalConfig,
eth40gServiceLabel OCTET STRING,
eth40gLldpStatusIf INTEGER,
eth40gHoldoffSignal CoriantTypesYesNo,
eth40gManagedBy INTEGER
}
eth40gEthFecType OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working type of etyn port.
default value :auto"
::= { eth40gEntry 1 }
eth40gEthFecTypeState OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working state of etyn port.
default value :disabled"
::= { eth40gEntry 2 }
eth40gTransmitInterpacketgap OBJECT-TYPE
SYNTAX Unsigned32 (8..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the minimum transmit IPG value.
default value :8"
::= { eth40gEntry 3 }
eth40gGfpPayloadFcs OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
default value :disabled"
::= { eth40gEntry 4 }
eth40gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { eth40gEntry 5 }
eth40gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { eth40gEntry 6 }
eth40gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { eth40gEntry 7 }
eth40gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { eth40gEntry 8 }
eth40gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { eth40gEntry 9 }
eth40gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { eth40gEntry 10 }
eth40gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { eth40gEntry 11 }
eth40gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { eth40gEntry 12 }
eth40gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { eth40gEntry 13 }
eth40gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { eth40gEntry 14 }
eth40gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { eth40gEntry 15 }
eth40gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { eth40gEntry 16 }
eth40gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { eth40gEntry 17 }
eth40gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { eth40gEntry 18 }
eth40gLldpStatusIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rxonly (2),
txandrx (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled"
::= { eth40gEntry 19 }
eth40gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { eth40gEntry 20 }
eth40gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { eth40gEntry 21 }
eth100g OBJECT IDENTIFIER ::= { otn 9 }
eth100gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth100gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the 100GBE object."
::= { eth100g 1 }
eth100gEntry OBJECT-TYPE
SYNTAX Eth100gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth100gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth100gTable 1 }
Eth100gEntry ::=
SEQUENCE {
eth100gEthFecType CoriantTypesEthFec,
eth100gEthFecTypeState CoriantTypesEthFec,
eth100gTransmitInterpacketgap Unsigned32,
eth100gGfpPayloadFcs CoriantTypesEnableSwitch,
eth100gMappingMode INTEGER,
eth100gAdminStatus INTEGER,
eth100gOperStatus INTEGER,
eth100gAvailStatus BITS,
eth100gAliasName OCTET STRING,
eth100gClientShutdown CoriantTypesYesNo,
eth100gClientShutdownHoldoffTimer Unsigned32,
eth100gNearEndAls CoriantTypesYesNo,
eth100gAlsDegradeMode CoriantTypesEnableSwitch,
eth100gLoopbackEnable CoriantTypesEnableSwitch,
eth100gLoopbackType INTEGER,
eth100gTestSignalType CoriantTypesTestSignalType,
eth100gTestSignalEnable CoriantTypesTestSignalConfig,
eth100gServiceLabel OCTET STRING,
eth100gLldpStatusIf INTEGER,
eth100gHoldoffSignal CoriantTypesYesNo,
eth100gManagedBy INTEGER
}
eth100gEthFecType OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working type of etyn port.
default value :auto"
::= { eth100gEntry 1 }
eth100gEthFecTypeState OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working state of etyn port.
default value :disabled"
::= { eth100gEntry 2 }
eth100gTransmitInterpacketgap OBJECT-TYPE
SYNTAX Unsigned32 (8..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the minimum transmit IPG value.
default value :8"
::= { eth100gEntry 3 }
eth100gGfpPayloadFcs OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
default value :disabled"
::= { eth100gEntry 4 }
eth100gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { eth100gEntry 5 }
eth100gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { eth100gEntry 6 }
eth100gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { eth100gEntry 7 }
eth100gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { eth100gEntry 8 }
eth100gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { eth100gEntry 9 }
eth100gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { eth100gEntry 10 }
eth100gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { eth100gEntry 11 }
eth100gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { eth100gEntry 12 }
eth100gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { eth100gEntry 13 }
eth100gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { eth100gEntry 14 }
eth100gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { eth100gEntry 15 }
eth100gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { eth100gEntry 16 }
eth100gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { eth100gEntry 17 }
eth100gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { eth100gEntry 18 }
eth100gLldpStatusIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rxonly (2),
txandrx (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled"
::= { eth100gEntry 19 }
eth100gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { eth100gEntry 20 }
eth100gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { eth100gEntry 21 }
otu4 OBJECT IDENTIFIER ::= { otn 10 }
otu4Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otu4 object"
::= { otu4 1 }
otu4Entry OBJECT-TYPE
SYNTAX Otu4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu4Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu4Table 1 }
Otu4Entry ::=
SEQUENCE {
otu4FecType CoriantTypesOtukFec,
otu4AdminStatus INTEGER,
otu4OperStatus INTEGER,
otu4AvailStatus BITS,
otu4AliasName OCTET STRING,
otu4ServiceLabel OCTET STRING,
otu4ExpSapi CoriantTypesTtiType15,
otu4ExpDapi CoriantTypesTtiType15,
otu4ExpOperator CoriantTypesTtiType32,
otu4TxSapi CoriantTypesTtiType15,
otu4TxDapi CoriantTypesTtiType15,
otu4TxOperator CoriantTypesTtiType32,
otu4TimDefectMode CoriantTypesTimMode,
otu4TimAct CoriantTypesEnableSwitch,
otu4RxSapi OCTET STRING,
otu4RxDapi OCTET STRING,
otu4RxOperator OCTET STRING,
otu4DegradeInterval Unsigned32,
otu4DegradeThreshold Unsigned32,
otu4LoopbackEnable CoriantTypesEnableSwitch,
otu4LoopbackType INTEGER,
otu4ClientShutdown CoriantTypesYesNo,
otu4ClientShutdownHoldoffTimer Unsigned32,
otu4HoldoffSignal CoriantTypesYesNo,
otu4NearEndAls CoriantTypesYesNo,
otu4AlsDegradeMode CoriantTypesEnableSwitch,
otu4ManagedBy INTEGER
}
otu4FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otu4Entry 1 }
otu4AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otu4Entry 2 }
otu4OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otu4Entry 3 }
otu4AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otu4Entry 4 }
otu4AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otu4Entry 5 }
otu4ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otu4Entry 6 }
otu4ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otu4Entry 7 }
otu4ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otu4Entry 8 }
otu4ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otu4Entry 9 }
otu4TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otu4Entry 10 }
otu4TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otu4Entry 11 }
otu4TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otu4Entry 12 }
otu4TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otu4Entry 13 }
otu4TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otu4Entry 14 }
otu4RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otu4Entry 15 }
otu4RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otu4Entry 16 }
otu4RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otu4Entry 17 }
otu4DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otu4Entry 18 }
otu4DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :128459"
::= { otu4Entry 19 }
otu4LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { otu4Entry 20 }
otu4LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { otu4Entry 21 }
otu4ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { otu4Entry 22 }
otu4ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { otu4Entry 23 }
otu4HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { otu4Entry 24 }
otu4NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { otu4Entry 25 }
otu4AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { otu4Entry 26 }
otu4ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otu4Entry 27 }
otu2 OBJECT IDENTIFIER ::= { otn 11 }
otu2Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otu2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otu2 object"
::= { otu2 1 }
otu2Entry OBJECT-TYPE
SYNTAX Otu2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu2Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu2Table 1 }
Otu2Entry ::=
SEQUENCE {
otu2FecType CoriantTypesOtukFec,
otu2AdminStatus INTEGER,
otu2OperStatus INTEGER,
otu2AvailStatus BITS,
otu2AliasName OCTET STRING,
otu2ServiceLabel OCTET STRING,
otu2ExpSapi CoriantTypesTtiType15,
otu2ExpDapi CoriantTypesTtiType15,
otu2ExpOperator CoriantTypesTtiType32,
otu2TxSapi CoriantTypesTtiType15,
otu2TxDapi CoriantTypesTtiType15,
otu2TxOperator CoriantTypesTtiType32,
otu2TimDefectMode CoriantTypesTimMode,
otu2TimAct CoriantTypesEnableSwitch,
otu2RxSapi OCTET STRING,
otu2RxDapi OCTET STRING,
otu2RxOperator OCTET STRING,
otu2DegradeInterval Unsigned32,
otu2DegradeThreshold Unsigned32,
otu2LoopbackEnable CoriantTypesEnableSwitch,
otu2LoopbackType INTEGER,
otu2ManagedBy INTEGER,
otu2ClientShutdown CoriantTypesYesNo,
otu2ClientShutdownHoldoffTimer Unsigned32,
otu2HoldoffSignal CoriantTypesYesNo,
otu2NearEndAls CoriantTypesYesNo,
otu2AlsDegradeMode CoriantTypesEnableSwitch
}
otu2FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otu2Entry 1 }
otu2AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otu2Entry 2 }
otu2OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otu2Entry 3 }
otu2AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otu2Entry 4 }
otu2AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otu2Entry 5 }
otu2ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otu2Entry 6 }
otu2ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otu2Entry 7 }
otu2ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otu2Entry 8 }
otu2ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otu2Entry 9 }
otu2TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otu2Entry 10 }
otu2TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otu2Entry 11 }
otu2TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otu2Entry 12 }
otu2TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otu2Entry 13 }
otu2TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otu2Entry 14 }
otu2RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otu2Entry 15 }
otu2RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otu2Entry 16 }
otu2RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otu2Entry 17 }
otu2DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otu2Entry 18 }
otu2DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :12304"
::= { otu2Entry 19 }
otu2LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { otu2Entry 20 }
otu2LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { otu2Entry 21 }
otu2ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otu2Entry 22 }
otu2ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { otu2Entry 24 }
otu2ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { otu2Entry 25 }
otu2HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { otu2Entry 26 }
otu2NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { otu2Entry 27 }
otu2AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { otu2Entry 28 }
otu2e OBJECT IDENTIFIER ::= { otn 12 }
otu2eTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otu2eEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otu2e object"
::= { otu2e 1 }
otu2eEntry OBJECT-TYPE
SYNTAX Otu2eEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu2eTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu2eTable 1 }
Otu2eEntry ::=
SEQUENCE {
otu2eFecType CoriantTypesOtukFec,
otu2eAdminStatus INTEGER,
otu2eOperStatus INTEGER,
otu2eAvailStatus BITS,
otu2eAliasName OCTET STRING,
otu2eServiceLabel OCTET STRING,
otu2eExpSapi CoriantTypesTtiType15,
otu2eExpDapi CoriantTypesTtiType15,
otu2eExpOperator CoriantTypesTtiType32,
otu2eTxSapi CoriantTypesTtiType15,
otu2eTxDapi CoriantTypesTtiType15,
otu2eTxOperator CoriantTypesTtiType32,
otu2eTimDefectMode CoriantTypesTimMode,
otu2eTimAct CoriantTypesEnableSwitch,
otu2eRxSapi OCTET STRING,
otu2eRxDapi OCTET STRING,
otu2eRxOperator OCTET STRING,
otu2eDegradeInterval Unsigned32,
otu2eDegradeThreshold Unsigned32,
otu2eLoopbackEnable CoriantTypesEnableSwitch,
otu2eLoopbackType INTEGER,
otu2eManagedBy INTEGER,
otu2eClientShutdown CoriantTypesYesNo,
otu2eClientShutdownHoldoffTimer Unsigned32,
otu2eHoldoffSignal CoriantTypesYesNo,
otu2eNearEndAls CoriantTypesYesNo,
otu2eAlsDegradeMode CoriantTypesEnableSwitch
}
otu2eFecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otu2eEntry 1 }
otu2eAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otu2eEntry 2 }
otu2eOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otu2eEntry 3 }
otu2eAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otu2eEntry 4 }
otu2eAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otu2eEntry 5 }
otu2eServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otu2eEntry 6 }
otu2eExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otu2eEntry 7 }
otu2eExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otu2eEntry 8 }
otu2eExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otu2eEntry 9 }
otu2eTxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otu2eEntry 10 }
otu2eTxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otu2eEntry 11 }
otu2eTxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otu2eEntry 12 }
otu2eTimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otu2eEntry 13 }
otu2eTimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otu2eEntry 14 }
otu2eRxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otu2eEntry 15 }
otu2eRxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otu2eEntry 16 }
otu2eRxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otu2eEntry 17 }
otu2eDegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otu2eEntry 18 }
otu2eDegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :12748"
::= { otu2eEntry 19 }
otu2eLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { otu2eEntry 20 }
otu2eLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { otu2eEntry 21 }
otu2eManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otu2eEntry 22 }
otu2eClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { otu2eEntry 24 }
otu2eClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { otu2eEntry 25 }
otu2eHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { otu2eEntry 26 }
otu2eNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { otu2eEntry 27 }
otu2eAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { otu2eEntry 28 }
fc8g OBJECT IDENTIFIER ::= { otn 13 }
fc8gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fc8gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the FC8G object.
"
::= { fc8g 1 }
fc8gEntry OBJECT-TYPE
SYNTAX Fc8gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fc8gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { fc8gTable 1 }
Fc8gEntry ::=
SEQUENCE {
fc8gMappingMode INTEGER,
fc8gAdminStatus INTEGER,
fc8gOperStatus INTEGER,
fc8gAvailStatus BITS,
fc8gAliasName OCTET STRING,
fc8gClientShutdown CoriantTypesYesNo,
fc8gClientShutdownHoldoffTimer Unsigned32,
fc8gNearEndAls CoriantTypesYesNo,
fc8gAlsDegradeMode CoriantTypesEnableSwitch,
fc8gLoopbackEnable CoriantTypesEnableSwitch,
fc8gLoopbackType INTEGER,
fc8gTestSignalType CoriantTypesTestSignalType,
fc8gTestSignalEnable CoriantTypesTestSignalConfig,
fc8gServiceLabel OCTET STRING,
fc8gHoldoffSignal CoriantTypesYesNo,
fc8gManagedBy INTEGER
}
fc8gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { fc8gEntry 1 }
fc8gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { fc8gEntry 2 }
fc8gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { fc8gEntry 3 }
fc8gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { fc8gEntry 4 }
fc8gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { fc8gEntry 5 }
fc8gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { fc8gEntry 6 }
fc8gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { fc8gEntry 7 }
fc8gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { fc8gEntry 8 }
fc8gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { fc8gEntry 9 }
fc8gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { fc8gEntry 10 }
fc8gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { fc8gEntry 11 }
fc8gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { fc8gEntry 12 }
fc8gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { fc8gEntry 13 }
fc8gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { fc8gEntry 14 }
fc8gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { fc8gEntry 15 }
fc8gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { fc8gEntry 16 }
fc16g OBJECT IDENTIFIER ::= { otn 14 }
fc16gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fc16gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the FC16G object.
"
::= { fc16g 1 }
fc16gEntry OBJECT-TYPE
SYNTAX Fc16gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fc16gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { fc16gTable 1 }
Fc16gEntry ::=
SEQUENCE {
fc16gMappingMode INTEGER,
fc16gAdminStatus INTEGER,
fc16gOperStatus INTEGER,
fc16gAvailStatus BITS,
fc16gAliasName OCTET STRING,
fc16gClientShutdown CoriantTypesYesNo,
fc16gClientShutdownHoldoffTimer Unsigned32,
fc16gNearEndAls CoriantTypesYesNo,
fc16gAlsDegradeMode CoriantTypesEnableSwitch,
fc16gLoopbackEnable CoriantTypesEnableSwitch,
fc16gLoopbackType INTEGER,
fc16gTestSignalType CoriantTypesTestSignalType,
fc16gTestSignalEnable CoriantTypesTestSignalConfig,
fc16gServiceLabel OCTET STRING,
fc16gHoldoffSignal CoriantTypesYesNo,
fc16gManagedBy INTEGER
}
fc16gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { fc16gEntry 1 }
fc16gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { fc16gEntry 2 }
fc16gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { fc16gEntry 3 }
fc16gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { fc16gEntry 4 }
fc16gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { fc16gEntry 5 }
fc16gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { fc16gEntry 6 }
fc16gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { fc16gEntry 7 }
fc16gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { fc16gEntry 8 }
fc16gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { fc16gEntry 9 }
fc16gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { fc16gEntry 10 }
fc16gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { fc16gEntry 11 }
fc16gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { fc16gEntry 12 }
fc16gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { fc16gEntry 13 }
fc16gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { fc16gEntry 14 }
fc16gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { fc16gEntry 15 }
fc16gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { fc16gEntry 16 }
oc192 OBJECT IDENTIFIER ::= { otn 15 }
oc192Table OBJECT-TYPE
SYNTAX SEQUENCE OF Oc192Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the OC192 object.
"
::= { oc192 1 }
oc192Entry OBJECT-TYPE
SYNTAX Oc192Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oc192Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { oc192Table 1 }
Oc192Entry ::=
SEQUENCE {
oc192MappingMode INTEGER,
oc192AdminStatus INTEGER,
oc192OperStatus INTEGER,
oc192AvailStatus BITS,
oc192AliasName OCTET STRING,
oc192ClientShutdown CoriantTypesYesNo,
oc192ClientShutdownHoldoffTimer Unsigned32,
oc192NearEndAls CoriantTypesYesNo,
oc192AlsDegradeMode CoriantTypesEnableSwitch,
oc192LoopbackEnable CoriantTypesEnableSwitch,
oc192LoopbackType INTEGER,
oc192TestSignalType CoriantTypesTestSignalType,
oc192TestSignalEnable CoriantTypesTestSignalConfig,
oc192ServiceLabel OCTET STRING,
oc192ExpTrc CoriantTypesTtiType15,
oc192TxTrc CoriantTypesTtiType15,
oc192RxTrc OCTET STRING,
oc192TimAct CoriantTypesEnableSwitch,
oc192TimMonitor CoriantTypesEnableSwitch,
oc192AisType INTEGER,
oc192HoldoffSignal CoriantTypesYesNo,
oc192ManagedBy INTEGER
}
oc192MappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { oc192Entry 1 }
oc192AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { oc192Entry 2 }
oc192OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { oc192Entry 3 }
oc192AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { oc192Entry 4 }
oc192AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oc192Entry 5 }
oc192ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { oc192Entry 6 }
oc192ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { oc192Entry 7 }
oc192NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { oc192Entry 8 }
oc192AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { oc192Entry 9 }
oc192LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { oc192Entry 10 }
oc192LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { oc192Entry 11 }
oc192TestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { oc192Entry 12 }
oc192TestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { oc192Entry 13 }
oc192ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { oc192Entry 14 }
oc192ExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { oc192Entry 15 }
oc192TxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { oc192Entry 16 }
oc192RxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { oc192Entry 17 }
oc192TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { oc192Entry 18 }
oc192TimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { oc192Entry 19 }
oc192AisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { oc192Entry 20 }
oc192HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { oc192Entry 21 }
oc192ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { oc192Entry 22 }
stm64 OBJECT IDENTIFIER ::= { otn 16 }
stm64Table OBJECT-TYPE
SYNTAX SEQUENCE OF Stm64Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the STM64 object.
"
::= { stm64 1 }
stm64Entry OBJECT-TYPE
SYNTAX Stm64Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of stm64Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { stm64Table 1 }
Stm64Entry ::=
SEQUENCE {
stm64MappingMode INTEGER,
stm64AdminStatus INTEGER,
stm64OperStatus INTEGER,
stm64AvailStatus BITS,
stm64AliasName OCTET STRING,
stm64ClientShutdown CoriantTypesYesNo,
stm64ClientShutdownHoldoffTimer Unsigned32,
stm64NearEndAls CoriantTypesYesNo,
stm64AlsDegradeMode CoriantTypesEnableSwitch,
stm64LoopbackEnable CoriantTypesEnableSwitch,
stm64LoopbackType INTEGER,
stm64TestSignalType CoriantTypesTestSignalType,
stm64TestSignalEnable CoriantTypesTestSignalConfig,
stm64ServiceLabel OCTET STRING,
stm64ExpTrc CoriantTypesTtiType15,
stm64TxTrc CoriantTypesTtiType15,
stm64RxTrc OCTET STRING,
stm64TimAct CoriantTypesEnableSwitch,
stm64TimMonitor CoriantTypesEnableSwitch,
stm64AisType INTEGER,
stm64HoldoffSignal CoriantTypesYesNo,
stm64ManagedBy INTEGER
}
stm64MappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { stm64Entry 1 }
stm64AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { stm64Entry 2 }
stm64OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { stm64Entry 3 }
stm64AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { stm64Entry 4 }
stm64AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { stm64Entry 5 }
stm64ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { stm64Entry 6 }
stm64ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { stm64Entry 7 }
stm64NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { stm64Entry 8 }
stm64AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { stm64Entry 9 }
stm64LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { stm64Entry 10 }
stm64LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { stm64Entry 11 }
stm64TestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { stm64Entry 12 }
stm64TestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { stm64Entry 13 }
stm64ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { stm64Entry 14 }
stm64ExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { stm64Entry 15 }
stm64TxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { stm64Entry 16 }
stm64RxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { stm64Entry 17 }
stm64TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { stm64Entry 18 }
stm64TimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { stm64Entry 19 }
stm64AisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { stm64Entry 20 }
stm64HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { stm64Entry 21 }
stm64ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { stm64Entry 22 }
otuc2 OBJECT IDENTIFIER ::= { otn 17 }
otuc2Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc2 object"
::= { otuc2 1 }
otuc2Entry OBJECT-TYPE
SYNTAX Otuc2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc2Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc2Table 1 }
Otuc2Entry ::=
SEQUENCE {
otuc2FecType CoriantTypesOtukFec,
otuc2AdminStatus INTEGER,
otuc2OperStatus INTEGER,
otuc2AvailStatus BITS,
otuc2AliasName OCTET STRING,
otuc2ServiceLabel OCTET STRING,
otuc2ExpSapi CoriantTypesTtiType15,
otuc2ExpDapi CoriantTypesTtiType15,
otuc2ExpOperator CoriantTypesTtiType32,
otuc2TxSapi CoriantTypesTtiType15,
otuc2TxDapi CoriantTypesTtiType15,
otuc2TxOperator CoriantTypesTtiType32,
otuc2TimDefectMode CoriantTypesTimMode,
otuc2TimAct CoriantTypesEnableSwitch,
otuc2RxSapi OCTET STRING,
otuc2RxDapi OCTET STRING,
otuc2RxOperator OCTET STRING,
otuc2DegradeInterval Unsigned32,
otuc2DegradeThreshold Unsigned32,
otuc2ManagedBy INTEGER
}
otuc2FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc2Entry 1 }
otuc2AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc2Entry 2 }
otuc2OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc2Entry 3 }
otuc2AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc2Entry 4 }
otuc2AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc2Entry 5 }
otuc2ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc2Entry 6 }
otuc2ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc2Entry 7 }
otuc2ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc2Entry 8 }
otuc2ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc2Entry 9 }
otuc2TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc2Entry 10 }
otuc2TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc2Entry 11 }
otuc2TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc2Entry 12 }
otuc2TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc2Entry 13 }
otuc2TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc2Entry 14 }
otuc2RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc2Entry 15 }
otuc2RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc2Entry 16 }
otuc2RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc2Entry 17 }
otuc2DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc2Entry 18 }
otuc2DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :259085"
::= { otuc2Entry 19 }
otuc2ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc2Entry 20 }
otuc3 OBJECT IDENTIFIER ::= { otn 18 }
otuc3Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc3 object"
::= { otuc3 1 }
otuc3Entry OBJECT-TYPE
SYNTAX Otuc3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc3Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc3Table 1 }
Otuc3Entry ::=
SEQUENCE {
otuc3FecType CoriantTypesOtukFec,
otuc3AdminStatus INTEGER,
otuc3OperStatus INTEGER,
otuc3AvailStatus BITS,
otuc3AliasName OCTET STRING,
otuc3ServiceLabel OCTET STRING,
otuc3ExpSapi CoriantTypesTtiType15,
otuc3ExpDapi CoriantTypesTtiType15,
otuc3ExpOperator CoriantTypesTtiType32,
otuc3TxSapi CoriantTypesTtiType15,
otuc3TxDapi CoriantTypesTtiType15,
otuc3TxOperator CoriantTypesTtiType32,
otuc3TimDefectMode CoriantTypesTimMode,
otuc3TimAct CoriantTypesEnableSwitch,
otuc3RxSapi OCTET STRING,
otuc3RxDapi OCTET STRING,
otuc3RxOperator OCTET STRING,
otuc3DegradeInterval Unsigned32,
otuc3DegradeThreshold Unsigned32,
otuc3ManagedBy INTEGER
}
otuc3FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc3Entry 1 }
otuc3AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc3Entry 2 }
otuc3OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc3Entry 3 }
otuc3AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc3Entry 4 }
otuc3AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc3Entry 5 }
otuc3ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc3Entry 6 }
otuc3ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc3Entry 7 }
otuc3ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc3Entry 8 }
otuc3ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc3Entry 9 }
otuc3TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc3Entry 10 }
otuc3TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc3Entry 11 }
otuc3TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc3Entry 12 }
otuc3TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc3Entry 13 }
otuc3TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc3Entry 14 }
otuc3RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc3Entry 15 }
otuc3RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc3Entry 16 }
otuc3RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc3Entry 17 }
otuc3DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc3Entry 18 }
otuc3DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :388627"
::= { otuc3Entry 19 }
otuc3ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc3Entry 20 }
ochOs OBJECT IDENTIFIER ::= { otn 19 }
ochOsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchOsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the och-os MO"
::= { ochOs 1 }
ochOsEntry OBJECT-TYPE
SYNTAX OchOsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochOsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { ochOsTable 1 }
OchOsEntry ::=
SEQUENCE {
ochOsModulationFormat INTEGER,
ochOsLineEncoding INTEGER,
ochOsFrequency CoriantTypesFreq,
ochOsActualFrequency CoriantTypesFreqGeneric,
ochOsRxFrequency CoriantTypesFreq,
ochOsActualRxFrequency CoriantTypesFreqGeneric,
ochOsLaserEnable CoriantTypesEnableSwitch,
ochOsRequiredTxOpticalPower CoriantTypesOpticalPower,
ochOsActualTxOpticalPower CoriantTypesOpticalPower,
ochOsFecType CoriantTypesOtukFec,
ochOsRxAttenuation CoriantTypesOpticalDB,
ochOsTxFilterRollOff OCTET STRING,
ochOsPreemphasis CoriantTypesEnableSwitch,
ochOsPreemphasisValue OCTET STRING,
ochOsAdminStatus INTEGER,
ochOsOperStatus INTEGER,
ochOsAvailStatus BITS,
ochOsAliasName OCTET STRING,
ochOsLoopbackEnable CoriantTypesEnableSwitch,
ochOsLoopbackType INTEGER,
ochOsServiceLabel OCTET STRING,
ochOsDGD Unsigned32,
ochOsCD INTEGER,
ochOsOSNR CoriantTypesOpticalDB,
ochOsQFactor CoriantTypesOpticalDB,
ochOsPreFecBer OCTET STRING,
ochOsCdRangeLow INTEGER,
ochOsCdRangeHigh INTEGER,
ochOsPropagateShutdown CoriantTypesYesNo,
ochOsFastSopMode CoriantTypesEnableSwitch,
ochOsRateClass INTEGER,
ochOsManagedBy INTEGER,
ochOsBICHM INTEGER,
ochOsCdCompensationMode INTEGER,
ochOsCdCompensationValue INTEGER,
ochOsPropagateShutdownHoldoffTimer Unsigned32,
ochOsSOPVector OCTET STRING
}
ochOsModulationFormat OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
dpQpsk (1),
dp16qam (2),
dp8qam (3),
nrz (6),
dp64qam (7),
dpSp16qam (8),
dpQpskSp16qam (9),
dpSp16qam16qam (10),
dp16qam32qam (11),
dp32qam64qam (12),
dp32qam (15),
dpSpqpsk (17),
dpSpqpskQpsk (18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Currently och-os modulation format
"
::= { ochOsEntry 1 }
ochOsLineEncoding OBJECT-TYPE
SYNTAX INTEGER {
nonDifferential (1),
differential (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Currently line-encoding mode
default value :non-differential"
::= { ochOsEntry 2 }
ochOsFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only.
UNITS:MHz
default value :0"
::= { ochOsEntry 3 }
ochOsActualFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreqGeneric
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The actual laser frequency.
If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface.
UNITS:MHz
default value :0"
::= { ochOsEntry 4 }
ochOsRxFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreq
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The rx laser frequency. Special for 0 means it is same as tx laser frequency.
Conditions:../../possible-pluggable-types != 'SFP+'
UNITS:MHz
default value :0"
::= { ochOsEntry 5 }
ochOsActualRxFrequency OBJECT-TYPE
SYNTAX CoriantTypesFreqGeneric
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The actual rx laser frequency for coherent interface with separating Lo laser from Tx.
0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx.
Conditions:../../possible-pluggable-types != 'SFP+'
UNITS:MHz
default value :0"
::= { ochOsEntry 6 }
ochOsLaserEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The enable switching of output laser.
default value :disabled"
::= { ochOsEntry 7 }
ochOsRequiredTxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This is to support adjustable optical power of Line side.
default value :1.0"
::= { ochOsEntry 8 }
ochOsActualTxOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This is the actual transmitting optical power of Line side.
default value :-99.0"
::= { ochOsEntry 9 }
ochOsFecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The FEC type of och-os
default value :SDFEC25"
::= { ochOsEntry 10 }
ochOsRxAttenuation OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port.
default value :0.0"
::= { ochOsEntry 11 }
ochOsTxFilterRollOff OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitter filter roll off factor.
default value :0.2"
::= { ochOsEntry 12 }
ochOsPreemphasis OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Preemphasis of transmitted signal.
default value :enabled"
::= { ochOsEntry 13 }
ochOsPreemphasisValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Preemphasis of transmitted signal.
default value :1.0"
::= { ochOsEntry 14 }
ochOsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { ochOsEntry 15 }
ochOsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { ochOsEntry 16 }
ochOsAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { ochOsEntry 17 }
ochOsAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { ochOsEntry 18 }
ochOsLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { ochOsEntry 19 }
ochOsLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { ochOsEntry 20 }
ochOsServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { ochOsEntry 21 }
ochOsDGD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value of Differential Group Delay
UNITS:ps
"
::= { ochOsEntry 22 }
ochOsCD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value of Chromatic Dispersion
UNITS:ps/nm
"
::= { ochOsEntry 23 }
ochOsOSNR OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Current value of OSNR.
The result could be OSNR value with dB
"
::= { ochOsEntry 24 }
ochOsQFactor OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Current value of Q-factor
"
::= { ochOsEntry 25 }
ochOsPreFecBer OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current value of PreFEC Bit Error Ratio.
default value :-99.0"
::= { ochOsEntry 26 }
ochOsCdRangeLow OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "low value of chromatic dispersion search range.
UNITS:ps/nm
default value :-45000"
::= { ochOsEntry 27 }
ochOsCdRangeHigh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "high value of chromatic dispersion search range.
UNITS:ps/nm
default value :45000"
::= { ochOsEntry 28 }
ochOsPropagateShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When the attribute value is set to yes, the transmit laser will
be shutdown if the whole service of the direction has signal failure,
the function mainly used in regeneration node to propagate signal failure as LOS.
default value :no"
::= { ochOsEntry 29 }
ochOsFastSopMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface
will tolerate very fast SOP and transient.
default value :disabled"
::= { ochOsEntry 31 }
ochOsRateClass OBJECT-TYPE
SYNTAX INTEGER {
t10g (1),
t11g (2),
t100g (3),
t150g (4),
t200g (5),
t300g (6),
t400g (7),
t500g (8),
t600g (9),
t250g (10),
t350g (11),
t450g (12),
t550g (13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Carried OTN signal basic rate class
"
::= { ochOsEntry 32 }
ochOsManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { ochOsEntry 33 }
ochOsBICHM OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The BICHM (bit interleaved coded hybrid modulation) incremental step in 1/128 bits/symbol added to base modulation bits/symbol for the hybrid modes modulation-format.
0: Base modulation format bits/symbol;
1: 1/128 bits/symbol added to base modulation format bits/symbol;
...
127: 127/128 bits/symbol added to base modulation format bits/symbol
default value :64"
::= { ochOsEntry 34 }
ochOsCdCompensationMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "chromatic dispersion compensation value source mode
default value :auto"
::= { ochOsEntry 35 }
ochOsCdCompensationValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "manual chromatic dispersion compensation value
UNITS:ps/nm
"
::= { ochOsEntry 36 }
ochOsPropagateShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of propagate shutdown.
UNITS:milliseconds
default value :0"
::= { ochOsEntry 37 }
ochOsSOPVector OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RX SOP (State Of Polarization) Stokes Vector S1 S2 S3
S1: the degree of linearly polarized light aligned to horizontal (X) axis
S2: the degree of linearly polarized light aligned to +45 degree axis
S3: the degree of righthand circularly polarized light
"
::= { ochOsEntry 38 }
wan10gSonet OBJECT IDENTIFIER ::= { otn 30 }
wan10gSonetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Wan10gSonetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the 10GWAN_SONET object.
"
::= { wan10gSonet 1 }
wan10gSonetEntry OBJECT-TYPE
SYNTAX Wan10gSonetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wan10gSonetTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { wan10gSonetTable 1 }
Wan10gSonetEntry ::=
SEQUENCE {
wan10gSonetMappingMode INTEGER,
wan10gSonetAdminStatus INTEGER,
wan10gSonetOperStatus INTEGER,
wan10gSonetAvailStatus BITS,
wan10gSonetAliasName OCTET STRING,
wan10gSonetClientShutdown CoriantTypesYesNo,
wan10gSonetClientShutdownHoldoffTimer Unsigned32,
wan10gSonetHoldoffSignal CoriantTypesYesNo,
wan10gSonetNearEndAls CoriantTypesYesNo,
wan10gSonetAlsDegradeMode CoriantTypesEnableSwitch,
wan10gSonetLoopbackEnable CoriantTypesEnableSwitch,
wan10gSonetLoopbackType INTEGER,
wan10gSonetTestSignalType CoriantTypesTestSignalType,
wan10gSonetTestSignalEnable CoriantTypesTestSignalConfig,
wan10gSonetServiceLabel OCTET STRING,
wan10gSonetExpTrc CoriantTypesTtiType15,
wan10gSonetTxTrc CoriantTypesTtiType15,
wan10gSonetRxTrc OCTET STRING,
wan10gSonetTimAct CoriantTypesEnableSwitch,
wan10gSonetTimMonitor CoriantTypesEnableSwitch,
wan10gSonetAisType INTEGER,
wan10gSonetManagedBy INTEGER
}
wan10gSonetMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { wan10gSonetEntry 1 }
wan10gSonetAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { wan10gSonetEntry 2 }
wan10gSonetOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { wan10gSonetEntry 3 }
wan10gSonetAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { wan10gSonetEntry 4 }
wan10gSonetAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { wan10gSonetEntry 5 }
wan10gSonetClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { wan10gSonetEntry 6 }
wan10gSonetClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { wan10gSonetEntry 7 }
wan10gSonetHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { wan10gSonetEntry 8 }
wan10gSonetNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { wan10gSonetEntry 9 }
wan10gSonetAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { wan10gSonetEntry 10 }
wan10gSonetLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { wan10gSonetEntry 11 }
wan10gSonetLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { wan10gSonetEntry 12 }
wan10gSonetTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { wan10gSonetEntry 13 }
wan10gSonetTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { wan10gSonetEntry 14 }
wan10gSonetServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { wan10gSonetEntry 15 }
wan10gSonetExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { wan10gSonetEntry 16 }
wan10gSonetTxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { wan10gSonetEntry 17 }
wan10gSonetRxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { wan10gSonetEntry 18 }
wan10gSonetTimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { wan10gSonetEntry 19 }
wan10gSonetTimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { wan10gSonetEntry 20 }
wan10gSonetAisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { wan10gSonetEntry 21 }
wan10gSonetManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { wan10gSonetEntry 22 }
wan10gSdh OBJECT IDENTIFIER ::= { otn 31 }
wan10gSdhTable OBJECT-TYPE
SYNTAX SEQUENCE OF Wan10gSdhEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the 10GWAN_SDH object.
"
::= { wan10gSdh 1 }
wan10gSdhEntry OBJECT-TYPE
SYNTAX Wan10gSdhEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wan10gSdhTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { wan10gSdhTable 1 }
Wan10gSdhEntry ::=
SEQUENCE {
wan10gSdhMappingMode INTEGER,
wan10gSdhAdminStatus INTEGER,
wan10gSdhOperStatus INTEGER,
wan10gSdhAvailStatus BITS,
wan10gSdhAliasName OCTET STRING,
wan10gSdhClientShutdown CoriantTypesYesNo,
wan10gSdhClientShutdownHoldoffTimer Unsigned32,
wan10gSdhHoldoffSignal CoriantTypesYesNo,
wan10gSdhNearEndAls CoriantTypesYesNo,
wan10gSdhAlsDegradeMode CoriantTypesEnableSwitch,
wan10gSdhLoopbackEnable CoriantTypesEnableSwitch,
wan10gSdhLoopbackType INTEGER,
wan10gSdhTestSignalType CoriantTypesTestSignalType,
wan10gSdhTestSignalEnable CoriantTypesTestSignalConfig,
wan10gSdhServiceLabel OCTET STRING,
wan10gSdhExpTrc CoriantTypesTtiType15,
wan10gSdhTxTrc CoriantTypesTtiType15,
wan10gSdhRxTrc OCTET STRING,
wan10gSdhTimAct CoriantTypesEnableSwitch,
wan10gSdhTimMonitor CoriantTypesEnableSwitch,
wan10gSdhAisType INTEGER,
wan10gSdhManagedBy INTEGER
}
wan10gSdhMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { wan10gSdhEntry 1 }
wan10gSdhAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { wan10gSdhEntry 2 }
wan10gSdhOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { wan10gSdhEntry 3 }
wan10gSdhAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { wan10gSdhEntry 4 }
wan10gSdhAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { wan10gSdhEntry 5 }
wan10gSdhClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { wan10gSdhEntry 6 }
wan10gSdhClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { wan10gSdhEntry 7 }
wan10gSdhHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { wan10gSdhEntry 8 }
wan10gSdhNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { wan10gSdhEntry 9 }
wan10gSdhAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { wan10gSdhEntry 10 }
wan10gSdhLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { wan10gSdhEntry 11 }
wan10gSdhLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { wan10gSdhEntry 12 }
wan10gSdhTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { wan10gSdhEntry 13 }
wan10gSdhTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { wan10gSdhEntry 14 }
wan10gSdhServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { wan10gSdhEntry 15 }
wan10gSdhExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { wan10gSdhEntry 16 }
wan10gSdhTxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { wan10gSdhEntry 17 }
wan10gSdhRxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { wan10gSdhEntry 18 }
wan10gSdhTimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { wan10gSdhEntry 19 }
wan10gSdhTimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { wan10gSdhEntry 20 }
wan10gSdhAisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { wan10gSdhEntry 21 }
wan10gSdhManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { wan10gSdhEntry 22 }
eth10gStatistics OBJECT IDENTIFIER ::= { otn 32 }
eth10gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth10gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth10gStatistics 1 }
eth10gStatisticsEntry OBJECT-TYPE
SYNTAX Eth10gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth10gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth10gStatisticsTable 1 }
Eth10gStatisticsEntry ::=
SEQUENCE {
eth10gStatisticsEntryLastClear IetfYangTypesDateAndTime,
eth10gStatisticsEntryLossOfSignalSeconds OCTET STRING,
eth10gStatisticsEntryBitErrorFec OCTET STRING,
eth10gStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
eth10gStatisticsEntryInSymbolErrors OCTET STRING,
eth10gStatisticsEntryInDropEvents OCTET STRING,
eth10gStatisticsEntryInOctets OCTET STRING,
eth10gStatisticsEntryInPackets OCTET STRING,
eth10gStatisticsEntryInBroadcastPackets OCTET STRING,
eth10gStatisticsEntryInMulticastPackets OCTET STRING,
eth10gStatisticsEntryInCrcAlignErrors OCTET STRING,
eth10gStatisticsEntryInUndersizePackets OCTET STRING,
eth10gStatisticsEntryInOversizePackets OCTET STRING,
eth10gStatisticsEntryInFragments OCTET STRING,
eth10gStatisticsEntryInJabbers OCTET STRING,
eth10gStatisticsEntryInPackets64octets OCTET STRING,
eth10gStatisticsEntryInPackets65to127octets OCTET STRING,
eth10gStatisticsEntryInPackets128to255octets OCTET STRING,
eth10gStatisticsEntryInPackets256to511octets OCTET STRING,
eth10gStatisticsEntryInPackets512to1023octets OCTET STRING,
eth10gStatisticsEntryInPackets1024to1518octets OCTET STRING,
eth10gStatisticsEntryOutSymbolErrors OCTET STRING,
eth10gStatisticsEntryOutDropEvents OCTET STRING,
eth10gStatisticsEntryOutOctets OCTET STRING,
eth10gStatisticsEntryOutPackets OCTET STRING,
eth10gStatisticsEntryOutBroadcastPackets OCTET STRING,
eth10gStatisticsEntryOutMulticastPackets OCTET STRING,
eth10gStatisticsEntryOutCrcAlignErrors OCTET STRING,
eth10gStatisticsEntryOutUndersizePackets OCTET STRING,
eth10gStatisticsEntryOutOversizePackets OCTET STRING,
eth10gStatisticsEntryOutFragments OCTET STRING,
eth10gStatisticsEntryOutJabbers OCTET STRING,
eth10gStatisticsEntryOutPackets64octets OCTET STRING,
eth10gStatisticsEntryOutPackets65to127octets OCTET STRING,
eth10gStatisticsEntryOutPackets128to255octets OCTET STRING,
eth10gStatisticsEntryOutPackets256to511octets OCTET STRING,
eth10gStatisticsEntryOutPackets512to1023octets OCTET STRING,
eth10gStatisticsEntryOutPackets1024to1518octets OCTET STRING,
eth10gStatisticsEntryInCodingViolation OCTET STRING,
eth10gStatisticsEntryErroredSeconds OCTET STRING,
eth10gStatisticsEntrySeverelyErroredSeconds OCTET STRING,
eth10gStatisticsEntryUnavailableSeconds OCTET STRING
}
eth10gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { eth10gStatisticsEntry 1 }
eth10gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { eth10gStatisticsEntry 2 }
eth10gStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { eth10gStatisticsEntry 3 }
eth10gStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { eth10gStatisticsEntry 4 }
eth10gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth10gStatisticsEntry 5 }
eth10gStatisticsEntryInDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth10gStatisticsEntry 6 }
eth10gStatisticsEntryInOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth10gStatisticsEntry 7 }
eth10gStatisticsEntryInPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth10gStatisticsEntry 8 }
eth10gStatisticsEntryInBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth10gStatisticsEntry 9 }
eth10gStatisticsEntryInMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth10gStatisticsEntry 10 }
eth10gStatisticsEntryInCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth10gStatisticsEntry 11 }
eth10gStatisticsEntryInUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth10gStatisticsEntry 12 }
eth10gStatisticsEntryInOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth10gStatisticsEntry 13 }
eth10gStatisticsEntryInFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth10gStatisticsEntry 14 }
eth10gStatisticsEntryInJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth10gStatisticsEntry 15 }
eth10gStatisticsEntryInPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 16 }
eth10gStatisticsEntryInPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 17 }
eth10gStatisticsEntryInPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 18 }
eth10gStatisticsEntryInPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 19 }
eth10gStatisticsEntryInPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 20 }
eth10gStatisticsEntryInPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 21 }
eth10gStatisticsEntryOutSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth10gStatisticsEntry 22 }
eth10gStatisticsEntryOutDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth10gStatisticsEntry 23 }
eth10gStatisticsEntryOutOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth10gStatisticsEntry 24 }
eth10gStatisticsEntryOutPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth10gStatisticsEntry 25 }
eth10gStatisticsEntryOutBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth10gStatisticsEntry 26 }
eth10gStatisticsEntryOutMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth10gStatisticsEntry 27 }
eth10gStatisticsEntryOutCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth10gStatisticsEntry 28 }
eth10gStatisticsEntryOutUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth10gStatisticsEntry 29 }
eth10gStatisticsEntryOutOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth10gStatisticsEntry 30 }
eth10gStatisticsEntryOutFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth10gStatisticsEntry 31 }
eth10gStatisticsEntryOutJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth10gStatisticsEntry 32 }
eth10gStatisticsEntryOutPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 33 }
eth10gStatisticsEntryOutPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 34 }
eth10gStatisticsEntryOutPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 35 }
eth10gStatisticsEntryOutPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 36 }
eth10gStatisticsEntryOutPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 37 }
eth10gStatisticsEntryOutPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth10gStatisticsEntry 38 }
eth10gStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { eth10gStatisticsEntry 39 }
eth10gStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { eth10gStatisticsEntry 40 }
eth10gStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { eth10gStatisticsEntry 41 }
eth10gStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { eth10gStatisticsEntry 42 }
oduStatistics OBJECT IDENTIFIER ::= { otn 33 }
oduStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OduStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { oduStatistics 1 }
oduStatisticsEntry OBJECT-TYPE
SYNTAX OduStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oduStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,odutypeL1,oduidL1,odutypeL2,oduidL2,odutypeL3,oduidL3,odutypeL4,oduidL4 }
::= { oduStatisticsTable 1 }
OduStatisticsEntry ::=
SEQUENCE {
oduStatisticsEntryLastClear IetfYangTypesDateAndTime,
oduStatisticsEntryErroredBlocks OCTET STRING,
oduStatisticsEntryErroredSeconds OCTET STRING,
oduStatisticsEntrySeverelyErroredSeconds OCTET STRING,
oduStatisticsEntryUnavailableSeconds OCTET STRING,
oduStatisticsEntryEncryptionFailRx OCTET STRING
}
oduStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { oduStatisticsEntry 1 }
oduStatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { oduStatisticsEntry 2 }
oduStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { oduStatisticsEntry 3 }
oduStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { oduStatisticsEntry 4 }
oduStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { oduStatisticsEntry 5 }
oduStatisticsEntryEncryptionFailRx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Failed Encryption Frames of Receive side, corresponding to pm parameter Encryption-fail-rx
UNITS:frames
"
::= { oduStatisticsEntry 6 }
eth40gStatistics OBJECT IDENTIFIER ::= { otn 34 }
eth40gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth40gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth40gStatistics 1 }
eth40gStatisticsEntry OBJECT-TYPE
SYNTAX Eth40gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth40gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth40gStatisticsTable 1 }
Eth40gStatisticsEntry ::=
SEQUENCE {
eth40gStatisticsEntryLastClear IetfYangTypesDateAndTime,
eth40gStatisticsEntryLossOfSignalSeconds OCTET STRING,
eth40gStatisticsEntryBitErrorFec OCTET STRING,
eth40gStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
eth40gStatisticsEntryInSymbolErrors OCTET STRING,
eth40gStatisticsEntryInDropEvents OCTET STRING,
eth40gStatisticsEntryInOctets OCTET STRING,
eth40gStatisticsEntryInPackets OCTET STRING,
eth40gStatisticsEntryInBroadcastPackets OCTET STRING,
eth40gStatisticsEntryInMulticastPackets OCTET STRING,
eth40gStatisticsEntryInCrcAlignErrors OCTET STRING,
eth40gStatisticsEntryInUndersizePackets OCTET STRING,
eth40gStatisticsEntryInOversizePackets OCTET STRING,
eth40gStatisticsEntryInFragments OCTET STRING,
eth40gStatisticsEntryInJabbers OCTET STRING,
eth40gStatisticsEntryInPackets64octets OCTET STRING,
eth40gStatisticsEntryInPackets65to127octets OCTET STRING,
eth40gStatisticsEntryInPackets128to255octets OCTET STRING,
eth40gStatisticsEntryInPackets256to511octets OCTET STRING,
eth40gStatisticsEntryInPackets512to1023octets OCTET STRING,
eth40gStatisticsEntryInPackets1024to1518octets OCTET STRING,
eth40gStatisticsEntryOutSymbolErrors OCTET STRING,
eth40gStatisticsEntryOutDropEvents OCTET STRING,
eth40gStatisticsEntryOutOctets OCTET STRING,
eth40gStatisticsEntryOutPackets OCTET STRING,
eth40gStatisticsEntryOutBroadcastPackets OCTET STRING,
eth40gStatisticsEntryOutMulticastPackets OCTET STRING,
eth40gStatisticsEntryOutCrcAlignErrors OCTET STRING,
eth40gStatisticsEntryOutUndersizePackets OCTET STRING,
eth40gStatisticsEntryOutOversizePackets OCTET STRING,
eth40gStatisticsEntryOutFragments OCTET STRING,
eth40gStatisticsEntryOutJabbers OCTET STRING,
eth40gStatisticsEntryOutPackets64octets OCTET STRING,
eth40gStatisticsEntryOutPackets65to127octets OCTET STRING,
eth40gStatisticsEntryOutPackets128to255octets OCTET STRING,
eth40gStatisticsEntryOutPackets256to511octets OCTET STRING,
eth40gStatisticsEntryOutPackets512to1023octets OCTET STRING,
eth40gStatisticsEntryOutPackets1024to1518octets OCTET STRING,
eth40gStatisticsEntryInCodingViolation OCTET STRING,
eth40gStatisticsEntryErroredSeconds OCTET STRING,
eth40gStatisticsEntrySeverelyErroredSeconds OCTET STRING,
eth40gStatisticsEntryUnavailableSeconds OCTET STRING
}
eth40gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { eth40gStatisticsEntry 1 }
eth40gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { eth40gStatisticsEntry 2 }
eth40gStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { eth40gStatisticsEntry 3 }
eth40gStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { eth40gStatisticsEntry 4 }
eth40gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth40gStatisticsEntry 5 }
eth40gStatisticsEntryInDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth40gStatisticsEntry 6 }
eth40gStatisticsEntryInOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth40gStatisticsEntry 7 }
eth40gStatisticsEntryInPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth40gStatisticsEntry 8 }
eth40gStatisticsEntryInBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth40gStatisticsEntry 9 }
eth40gStatisticsEntryInMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth40gStatisticsEntry 10 }
eth40gStatisticsEntryInCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth40gStatisticsEntry 11 }
eth40gStatisticsEntryInUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth40gStatisticsEntry 12 }
eth40gStatisticsEntryInOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth40gStatisticsEntry 13 }
eth40gStatisticsEntryInFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth40gStatisticsEntry 14 }
eth40gStatisticsEntryInJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth40gStatisticsEntry 15 }
eth40gStatisticsEntryInPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 16 }
eth40gStatisticsEntryInPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 17 }
eth40gStatisticsEntryInPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 18 }
eth40gStatisticsEntryInPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 19 }
eth40gStatisticsEntryInPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 20 }
eth40gStatisticsEntryInPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 21 }
eth40gStatisticsEntryOutSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth40gStatisticsEntry 22 }
eth40gStatisticsEntryOutDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth40gStatisticsEntry 23 }
eth40gStatisticsEntryOutOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth40gStatisticsEntry 24 }
eth40gStatisticsEntryOutPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth40gStatisticsEntry 25 }
eth40gStatisticsEntryOutBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth40gStatisticsEntry 26 }
eth40gStatisticsEntryOutMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth40gStatisticsEntry 27 }
eth40gStatisticsEntryOutCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth40gStatisticsEntry 28 }
eth40gStatisticsEntryOutUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth40gStatisticsEntry 29 }
eth40gStatisticsEntryOutOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth40gStatisticsEntry 30 }
eth40gStatisticsEntryOutFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth40gStatisticsEntry 31 }
eth40gStatisticsEntryOutJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth40gStatisticsEntry 32 }
eth40gStatisticsEntryOutPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 33 }
eth40gStatisticsEntryOutPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 34 }
eth40gStatisticsEntryOutPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 35 }
eth40gStatisticsEntryOutPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 36 }
eth40gStatisticsEntryOutPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 37 }
eth40gStatisticsEntryOutPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth40gStatisticsEntry 38 }
eth40gStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { eth40gStatisticsEntry 39 }
eth40gStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { eth40gStatisticsEntry 40 }
eth40gStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { eth40gStatisticsEntry 41 }
eth40gStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { eth40gStatisticsEntry 42 }
eth100gStatistics OBJECT IDENTIFIER ::= { otn 35 }
eth100gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth100gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth100gStatistics 1 }
eth100gStatisticsEntry OBJECT-TYPE
SYNTAX Eth100gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth100gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth100gStatisticsTable 1 }
Eth100gStatisticsEntry ::=
SEQUENCE {
eth100gStatisticsEntryLastClear IetfYangTypesDateAndTime,
eth100gStatisticsEntryLossOfSignalSeconds OCTET STRING,
eth100gStatisticsEntryBitErrorFec OCTET STRING,
eth100gStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
eth100gStatisticsEntryInSymbolErrors OCTET STRING,
eth100gStatisticsEntryInDropEvents OCTET STRING,
eth100gStatisticsEntryInOctets OCTET STRING,
eth100gStatisticsEntryInPackets OCTET STRING,
eth100gStatisticsEntryInBroadcastPackets OCTET STRING,
eth100gStatisticsEntryInMulticastPackets OCTET STRING,
eth100gStatisticsEntryInCrcAlignErrors OCTET STRING,
eth100gStatisticsEntryInUndersizePackets OCTET STRING,
eth100gStatisticsEntryInOversizePackets OCTET STRING,
eth100gStatisticsEntryInFragments OCTET STRING,
eth100gStatisticsEntryInJabbers OCTET STRING,
eth100gStatisticsEntryInPackets64octets OCTET STRING,
eth100gStatisticsEntryInPackets65to127octets OCTET STRING,
eth100gStatisticsEntryInPackets128to255octets OCTET STRING,
eth100gStatisticsEntryInPackets256to511octets OCTET STRING,
eth100gStatisticsEntryInPackets512to1023octets OCTET STRING,
eth100gStatisticsEntryInPackets1024to1518octets OCTET STRING,
eth100gStatisticsEntryOutSymbolErrors OCTET STRING,
eth100gStatisticsEntryOutDropEvents OCTET STRING,
eth100gStatisticsEntryOutOctets OCTET STRING,
eth100gStatisticsEntryOutPackets OCTET STRING,
eth100gStatisticsEntryOutBroadcastPackets OCTET STRING,
eth100gStatisticsEntryOutMulticastPackets OCTET STRING,
eth100gStatisticsEntryOutCrcAlignErrors OCTET STRING,
eth100gStatisticsEntryOutUndersizePackets OCTET STRING,
eth100gStatisticsEntryOutOversizePackets OCTET STRING,
eth100gStatisticsEntryOutFragments OCTET STRING,
eth100gStatisticsEntryOutJabbers OCTET STRING,
eth100gStatisticsEntryOutPackets64octets OCTET STRING,
eth100gStatisticsEntryOutPackets65to127octets OCTET STRING,
eth100gStatisticsEntryOutPackets128to255octets OCTET STRING,
eth100gStatisticsEntryOutPackets256to511octets OCTET STRING,
eth100gStatisticsEntryOutPackets512to1023octets OCTET STRING,
eth100gStatisticsEntryOutPackets1024to1518octets OCTET STRING,
eth100gStatisticsEntryInCodingViolation OCTET STRING,
eth100gStatisticsEntryErroredSeconds OCTET STRING,
eth100gStatisticsEntrySeverelyErroredSeconds OCTET STRING,
eth100gStatisticsEntryUnavailableSeconds OCTET STRING
}
eth100gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { eth100gStatisticsEntry 1 }
eth100gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { eth100gStatisticsEntry 2 }
eth100gStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { eth100gStatisticsEntry 3 }
eth100gStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { eth100gStatisticsEntry 4 }
eth100gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth100gStatisticsEntry 5 }
eth100gStatisticsEntryInDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth100gStatisticsEntry 6 }
eth100gStatisticsEntryInOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth100gStatisticsEntry 7 }
eth100gStatisticsEntryInPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth100gStatisticsEntry 8 }
eth100gStatisticsEntryInBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth100gStatisticsEntry 9 }
eth100gStatisticsEntryInMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth100gStatisticsEntry 10 }
eth100gStatisticsEntryInCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth100gStatisticsEntry 11 }
eth100gStatisticsEntryInUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth100gStatisticsEntry 12 }
eth100gStatisticsEntryInOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth100gStatisticsEntry 13 }
eth100gStatisticsEntryInFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth100gStatisticsEntry 14 }
eth100gStatisticsEntryInJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth100gStatisticsEntry 15 }
eth100gStatisticsEntryInPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 16 }
eth100gStatisticsEntryInPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 17 }
eth100gStatisticsEntryInPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 18 }
eth100gStatisticsEntryInPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 19 }
eth100gStatisticsEntryInPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 20 }
eth100gStatisticsEntryInPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 21 }
eth100gStatisticsEntryOutSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth100gStatisticsEntry 22 }
eth100gStatisticsEntryOutDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth100gStatisticsEntry 23 }
eth100gStatisticsEntryOutOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth100gStatisticsEntry 24 }
eth100gStatisticsEntryOutPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth100gStatisticsEntry 25 }
eth100gStatisticsEntryOutBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth100gStatisticsEntry 26 }
eth100gStatisticsEntryOutMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth100gStatisticsEntry 27 }
eth100gStatisticsEntryOutCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth100gStatisticsEntry 28 }
eth100gStatisticsEntryOutUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth100gStatisticsEntry 29 }
eth100gStatisticsEntryOutOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth100gStatisticsEntry 30 }
eth100gStatisticsEntryOutFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth100gStatisticsEntry 31 }
eth100gStatisticsEntryOutJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth100gStatisticsEntry 32 }
eth100gStatisticsEntryOutPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 33 }
eth100gStatisticsEntryOutPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 34 }
eth100gStatisticsEntryOutPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 35 }
eth100gStatisticsEntryOutPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 36 }
eth100gStatisticsEntryOutPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 37 }
eth100gStatisticsEntryOutPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth100gStatisticsEntry 38 }
eth100gStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { eth100gStatisticsEntry 39 }
eth100gStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { eth100gStatisticsEntry 40 }
eth100gStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { eth100gStatisticsEntry 41 }
eth100gStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { eth100gStatisticsEntry 42 }
otu4Statistics OBJECT IDENTIFIER ::= { otn 36 }
otu4StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otu4StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otu4Statistics 1 }
otu4StatisticsEntry OBJECT-TYPE
SYNTAX Otu4StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu4StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu4StatisticsTable 1 }
Otu4StatisticsEntry ::=
SEQUENCE {
otu4StatisticsEntryLastClear IetfYangTypesDateAndTime,
otu4StatisticsEntryLossOfSignalSeconds OCTET STRING,
otu4StatisticsEntryBitErrorFec OCTET STRING,
otu4StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otu4StatisticsEntryErroredBlocks OCTET STRING,
otu4StatisticsEntryErroredSeconds OCTET STRING,
otu4StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otu4StatisticsEntryUnavailableSeconds OCTET STRING
}
otu4StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otu4StatisticsEntry 1 }
otu4StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otu4StatisticsEntry 2 }
otu4StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otu4StatisticsEntry 3 }
otu4StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otu4StatisticsEntry 4 }
otu4StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otu4StatisticsEntry 5 }
otu4StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otu4StatisticsEntry 6 }
otu4StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otu4StatisticsEntry 7 }
otu4StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otu4StatisticsEntry 8 }
otu2Statistics OBJECT IDENTIFIER ::= { otn 37 }
otu2StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otu2StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otu2Statistics 1 }
otu2StatisticsEntry OBJECT-TYPE
SYNTAX Otu2StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu2StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu2StatisticsTable 1 }
Otu2StatisticsEntry ::=
SEQUENCE {
otu2StatisticsEntryLastClear IetfYangTypesDateAndTime,
otu2StatisticsEntryLossOfSignalSeconds OCTET STRING,
otu2StatisticsEntryBitErrorFec OCTET STRING,
otu2StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otu2StatisticsEntryErroredBlocks OCTET STRING,
otu2StatisticsEntryErroredSeconds OCTET STRING,
otu2StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otu2StatisticsEntryUnavailableSeconds OCTET STRING
}
otu2StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otu2StatisticsEntry 1 }
otu2StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otu2StatisticsEntry 2 }
otu2StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otu2StatisticsEntry 3 }
otu2StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otu2StatisticsEntry 4 }
otu2StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otu2StatisticsEntry 5 }
otu2StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otu2StatisticsEntry 6 }
otu2StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otu2StatisticsEntry 7 }
otu2StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otu2StatisticsEntry 8 }
otu2eStatistics OBJECT IDENTIFIER ::= { otn 38 }
otu2eStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otu2eStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otu2eStatistics 1 }
otu2eStatisticsEntry OBJECT-TYPE
SYNTAX Otu2eStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otu2eStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otu2eStatisticsTable 1 }
Otu2eStatisticsEntry ::=
SEQUENCE {
otu2eStatisticsEntryLastClear IetfYangTypesDateAndTime,
otu2eStatisticsEntryLossOfSignalSeconds OCTET STRING,
otu2eStatisticsEntryBitErrorFec OCTET STRING,
otu2eStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otu2eStatisticsEntryErroredBlocks OCTET STRING,
otu2eStatisticsEntryErroredSeconds OCTET STRING,
otu2eStatisticsEntrySeverelyErroredSeconds OCTET STRING,
otu2eStatisticsEntryUnavailableSeconds OCTET STRING
}
otu2eStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otu2eStatisticsEntry 1 }
otu2eStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otu2eStatisticsEntry 2 }
otu2eStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otu2eStatisticsEntry 3 }
otu2eStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otu2eStatisticsEntry 4 }
otu2eStatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otu2eStatisticsEntry 5 }
otu2eStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otu2eStatisticsEntry 6 }
otu2eStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otu2eStatisticsEntry 7 }
otu2eStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otu2eStatisticsEntry 8 }
oc192Statistics OBJECT IDENTIFIER ::= { otn 39 }
oc192StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Oc192StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { oc192Statistics 1 }
oc192StatisticsEntry OBJECT-TYPE
SYNTAX Oc192StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oc192StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { oc192StatisticsTable 1 }
Oc192StatisticsEntry ::=
SEQUENCE {
oc192StatisticsEntryLastClear IetfYangTypesDateAndTime,
oc192StatisticsEntryLossOfSignalSeconds OCTET STRING,
oc192StatisticsEntryInCodingViolation OCTET STRING,
oc192StatisticsEntryInErroredSeconds OCTET STRING,
oc192StatisticsEntryInSeverelyErroredSeconds OCTET STRING,
oc192StatisticsEntryInUnavailableSeconds OCTET STRING,
oc192StatisticsEntryInSeverelyErroredFrameSecond OCTET STRING
}
oc192StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { oc192StatisticsEntry 1 }
oc192StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { oc192StatisticsEntry 2 }
oc192StatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { oc192StatisticsEntry 3 }
oc192StatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { oc192StatisticsEntry 4 }
oc192StatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { oc192StatisticsEntry 5 }
oc192StatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { oc192StatisticsEntry 6 }
oc192StatisticsEntryInSeverelyErroredFrameSecond OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS
UNITS:seconds
"
::= { oc192StatisticsEntry 7 }
stm64Statistics OBJECT IDENTIFIER ::= { otn 40 }
stm64StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Stm64StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { stm64Statistics 1 }
stm64StatisticsEntry OBJECT-TYPE
SYNTAX Stm64StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of stm64StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { stm64StatisticsTable 1 }
Stm64StatisticsEntry ::=
SEQUENCE {
stm64StatisticsEntryLastClear IetfYangTypesDateAndTime,
stm64StatisticsEntryLossOfSignalSeconds OCTET STRING,
stm64StatisticsEntryInBackgroundBlockError OCTET STRING,
stm64StatisticsEntryInErroredSeconds OCTET STRING,
stm64StatisticsEntryInSeverelyErroredSeconds OCTET STRING,
stm64StatisticsEntryInUnavailableSeconds OCTET STRING,
stm64StatisticsEntryInOutOfFrameSeconds OCTET STRING
}
stm64StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { stm64StatisticsEntry 1 }
stm64StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { stm64StatisticsEntry 2 }
stm64StatisticsEntryInBackgroundBlockError OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for ingress errored blocks, corresponding to pm parameter BBE
UNITS:blocks
"
::= { stm64StatisticsEntry 3 }
stm64StatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { stm64StatisticsEntry 4 }
stm64StatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { stm64StatisticsEntry 5 }
stm64StatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { stm64StatisticsEntry 6 }
stm64StatisticsEntryInOutOfFrameSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS
UNITS:seconds
"
::= { stm64StatisticsEntry 7 }
wan10gSonetStatistics OBJECT IDENTIFIER ::= { otn 41 }
wan10gSonetStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Wan10gSonetStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { wan10gSonetStatistics 1 }
wan10gSonetStatisticsEntry OBJECT-TYPE
SYNTAX Wan10gSonetStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wan10gSonetStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { wan10gSonetStatisticsTable 1 }
Wan10gSonetStatisticsEntry ::=
SEQUENCE {
wan10gSonetStatisticsEntryLastClear IetfYangTypesDateAndTime,
wan10gSonetStatisticsEntryLossOfSignalSeconds OCTET STRING,
wan10gSonetStatisticsEntryInCodingViolation OCTET STRING,
wan10gSonetStatisticsEntryInErroredSeconds OCTET STRING,
wan10gSonetStatisticsEntryInSeverelyErroredSeconds OCTET STRING,
wan10gSonetStatisticsEntryInUnavailableSeconds OCTET STRING,
wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond OCTET STRING
}
wan10gSonetStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { wan10gSonetStatisticsEntry 1 }
wan10gSonetStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { wan10gSonetStatisticsEntry 2 }
wan10gSonetStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { wan10gSonetStatisticsEntry 3 }
wan10gSonetStatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { wan10gSonetStatisticsEntry 4 }
wan10gSonetStatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { wan10gSonetStatisticsEntry 5 }
wan10gSonetStatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { wan10gSonetStatisticsEntry 6 }
wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS
UNITS:seconds
"
::= { wan10gSonetStatisticsEntry 7 }
wan10gSdhStatistics OBJECT IDENTIFIER ::= { otn 42 }
wan10gSdhStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Wan10gSdhStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { wan10gSdhStatistics 1 }
wan10gSdhStatisticsEntry OBJECT-TYPE
SYNTAX Wan10gSdhStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wan10gSdhStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { wan10gSdhStatisticsTable 1 }
Wan10gSdhStatisticsEntry ::=
SEQUENCE {
wan10gSdhStatisticsEntryLastClear IetfYangTypesDateAndTime,
wan10gSdhStatisticsEntryLossOfSignalSeconds OCTET STRING,
wan10gSdhStatisticsEntryInBackgroundBlockError OCTET STRING,
wan10gSdhStatisticsEntryInErroredSeconds OCTET STRING,
wan10gSdhStatisticsEntryInSeverelyErroredSeconds OCTET STRING,
wan10gSdhStatisticsEntryInUnavailableSeconds OCTET STRING,
wan10gSdhStatisticsEntryInOutOfFrameSeconds OCTET STRING
}
wan10gSdhStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { wan10gSdhStatisticsEntry 1 }
wan10gSdhStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { wan10gSdhStatisticsEntry 2 }
wan10gSdhStatisticsEntryInBackgroundBlockError OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for ingress errored blocks, corresponding to pm parameter BBE
UNITS:blocks
"
::= { wan10gSdhStatisticsEntry 3 }
wan10gSdhStatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { wan10gSdhStatisticsEntry 4 }
wan10gSdhStatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { wan10gSdhStatisticsEntry 5 }
wan10gSdhStatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { wan10gSdhStatisticsEntry 6 }
wan10gSdhStatisticsEntryInOutOfFrameSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS
UNITS:seconds
"
::= { wan10gSdhStatisticsEntry 7 }
fc8gStatistics OBJECT IDENTIFIER ::= { otn 43 }
fc8gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fc8gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { fc8gStatistics 1 }
fc8gStatisticsEntry OBJECT-TYPE
SYNTAX Fc8gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fc8gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { fc8gStatisticsTable 1 }
Fc8gStatisticsEntry ::=
SEQUENCE {
fc8gStatisticsEntryLastClear IetfYangTypesDateAndTime,
fc8gStatisticsEntryLossOfSignalSeconds OCTET STRING,
fc8gStatisticsEntryInSymbolErrors OCTET STRING
}
fc8gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { fc8gStatisticsEntry 1 }
fc8gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { fc8gStatisticsEntry 2 }
fc8gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { fc8gStatisticsEntry 3 }
fc16gStatistics OBJECT IDENTIFIER ::= { otn 44 }
fc16gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Fc16gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { fc16gStatistics 1 }
fc16gStatisticsEntry OBJECT-TYPE
SYNTAX Fc16gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fc16gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { fc16gStatisticsTable 1 }
Fc16gStatisticsEntry ::=
SEQUENCE {
fc16gStatisticsEntryLastClear IetfYangTypesDateAndTime,
fc16gStatisticsEntryLossOfSignalSeconds OCTET STRING,
fc16gStatisticsEntryInSymbolErrors OCTET STRING
}
fc16gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { fc16gStatisticsEntry 1 }
fc16gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { fc16gStatisticsEntry 2 }
fc16gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { fc16gStatisticsEntry 3 }
otuc2Statistics OBJECT IDENTIFIER ::= { otn 45 }
otuc2StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc2StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc2Statistics 1 }
otuc2StatisticsEntry OBJECT-TYPE
SYNTAX Otuc2StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc2StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc2StatisticsTable 1 }
Otuc2StatisticsEntry ::=
SEQUENCE {
otuc2StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc2StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc2StatisticsEntryBitErrorFec OCTET STRING,
otuc2StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc2StatisticsEntryErroredBlocks OCTET STRING,
otuc2StatisticsEntryErroredSeconds OCTET STRING,
otuc2StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc2StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc2StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc2StatisticsEntry 1 }
otuc2StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc2StatisticsEntry 2 }
otuc2StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc2StatisticsEntry 3 }
otuc2StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc2StatisticsEntry 4 }
otuc2StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc2StatisticsEntry 5 }
otuc2StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc2StatisticsEntry 6 }
otuc2StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc2StatisticsEntry 7 }
otuc2StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc2StatisticsEntry 8 }
otuc3Statistics OBJECT IDENTIFIER ::= { otn 46 }
otuc3StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc3StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc3Statistics 1 }
otuc3StatisticsEntry OBJECT-TYPE
SYNTAX Otuc3StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc3StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc3StatisticsTable 1 }
Otuc3StatisticsEntry ::=
SEQUENCE {
otuc3StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc3StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc3StatisticsEntryBitErrorFec OCTET STRING,
otuc3StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc3StatisticsEntryErroredBlocks OCTET STRING,
otuc3StatisticsEntryErroredSeconds OCTET STRING,
otuc3StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc3StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc3StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc3StatisticsEntry 1 }
otuc3StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc3StatisticsEntry 2 }
otuc3StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc3StatisticsEntry 3 }
otuc3StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc3StatisticsEntry 4 }
otuc3StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc3StatisticsEntry 5 }
otuc3StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc3StatisticsEntry 6 }
otuc3StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc3StatisticsEntry 7 }
otuc3StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc3StatisticsEntry 8 }
ochOsStatistics OBJECT IDENTIFIER ::= { otn 47 }
ochOsStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchOsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ochOsStatistics 1 }
ochOsStatisticsEntry OBJECT-TYPE
SYNTAX OchOsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochOsStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { ochOsStatisticsTable 1 }
OchOsStatisticsEntry ::=
SEQUENCE {
ochOsStatisticsEntryLastClear IetfYangTypesDateAndTime,
ochOsStatisticsEntryLossOfSignalSeconds OCTET STRING,
ochOsStatisticsEntryBitErrorFec OCTET STRING,
ochOsStatisticsEntryUncorrectedBlockErrorFec OCTET STRING
}
ochOsStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { ochOsStatisticsEntry 1 }
ochOsStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { ochOsStatisticsEntry 2 }
ochOsStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { ochOsStatisticsEntry 3 }
ochOsStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { ochOsStatisticsEntry 4 }
otuc6 OBJECT IDENTIFIER ::= { otn 48 }
otuc6Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc6 object"
::= { otuc6 1 }
otuc6Entry OBJECT-TYPE
SYNTAX Otuc6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc6Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc6Table 1 }
Otuc6Entry ::=
SEQUENCE {
otuc6FecType CoriantTypesOtukFec,
otuc6AdminStatus INTEGER,
otuc6OperStatus INTEGER,
otuc6AvailStatus BITS,
otuc6AliasName OCTET STRING,
otuc6ServiceLabel OCTET STRING,
otuc6ExpSapi CoriantTypesTtiType15,
otuc6ExpDapi CoriantTypesTtiType15,
otuc6ExpOperator CoriantTypesTtiType32,
otuc6TxSapi CoriantTypesTtiType15,
otuc6TxDapi CoriantTypesTtiType15,
otuc6TxOperator CoriantTypesTtiType32,
otuc6TimDefectMode CoriantTypesTimMode,
otuc6TimAct CoriantTypesEnableSwitch,
otuc6RxSapi OCTET STRING,
otuc6RxDapi OCTET STRING,
otuc6RxOperator OCTET STRING,
otuc6DegradeInterval Unsigned32,
otuc6DegradeThreshold Unsigned32,
otuc6ManagedBy INTEGER
}
otuc6FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc6Entry 1 }
otuc6AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc6Entry 2 }
otuc6OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc6Entry 3 }
otuc6AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc6Entry 4 }
otuc6AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc6Entry 5 }
otuc6ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc6Entry 6 }
otuc6ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc6Entry 7 }
otuc6ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc6Entry 8 }
otuc6ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc6Entry 9 }
otuc6TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc6Entry 10 }
otuc6TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc6Entry 11 }
otuc6TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc6Entry 12 }
otuc6TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc6Entry 13 }
otuc6TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc6Entry 14 }
otuc6RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc6Entry 15 }
otuc6RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc6Entry 16 }
otuc6RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc6Entry 17 }
otuc6DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc6Entry 18 }
otuc6DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :777255"
::= { otuc6Entry 19 }
otuc6ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc6Entry 20 }
otuc6Statistics OBJECT IDENTIFIER ::= { otn 49 }
otuc6StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc6StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc6Statistics 1 }
otuc6StatisticsEntry OBJECT-TYPE
SYNTAX Otuc6StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc6StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { otuc6StatisticsTable 1 }
Otuc6StatisticsEntry ::=
SEQUENCE {
otuc6StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc6StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc6StatisticsEntryBitErrorFec OCTET STRING,
otuc6StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc6StatisticsEntryErroredBlocks OCTET STRING,
otuc6StatisticsEntryErroredSeconds OCTET STRING,
otuc6StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc6StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc6StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc6StatisticsEntry 1 }
otuc6StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc6StatisticsEntry 2 }
otuc6StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc6StatisticsEntry 3 }
otuc6StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc6StatisticsEntry 4 }
otuc6StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc6StatisticsEntry 5 }
otuc6StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc6StatisticsEntry 6 }
otuc6StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc6StatisticsEntry 7 }
otuc6StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc6StatisticsEntry 8 }
otuc4 OBJECT IDENTIFIER ::= { otn 50 }
otuc4Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc6 object"
::= { otuc4 1 }
otuc4Entry OBJECT-TYPE
SYNTAX Otuc4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc4Table"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc4Table 1 }
Otuc4Entry ::=
SEQUENCE {
otuc4FecType CoriantTypesOtukFec,
otuc4AdminStatus INTEGER,
otuc4OperStatus INTEGER,
otuc4AvailStatus BITS,
otuc4AliasName OCTET STRING,
otuc4ServiceLabel OCTET STRING,
otuc4ExpSapi CoriantTypesTtiType15,
otuc4ExpDapi CoriantTypesTtiType15,
otuc4ExpOperator CoriantTypesTtiType32,
otuc4TxSapi CoriantTypesTtiType15,
otuc4TxDapi CoriantTypesTtiType15,
otuc4TxOperator CoriantTypesTtiType32,
otuc4TimDefectMode CoriantTypesTimMode,
otuc4TimAct CoriantTypesEnableSwitch,
otuc4RxSapi OCTET STRING,
otuc4RxDapi OCTET STRING,
otuc4RxOperator OCTET STRING,
otuc4DegradeInterval Unsigned32,
otuc4DegradeThreshold Unsigned32,
otuc4ManagedBy INTEGER
}
otuc4FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc4Entry 1 }
otuc4AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc4Entry 2 }
otuc4OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc4Entry 3 }
otuc4AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc4Entry 4 }
otuc4AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc4Entry 5 }
otuc4ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc4Entry 6 }
otuc4ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc4Entry 7 }
otuc4ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc4Entry 8 }
otuc4ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc4Entry 9 }
otuc4TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc4Entry 10 }
otuc4TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc4Entry 11 }
otuc4TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc4Entry 12 }
otuc4TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc4Entry 13 }
otuc4TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc4Entry 14 }
otuc4RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc4Entry 15 }
otuc4RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc4Entry 16 }
otuc4RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc4Entry 17 }
otuc4DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc4Entry 18 }
otuc4DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :518170"
::= { otuc4Entry 19 }
otuc4ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc4Entry 20 }
otuc4Statistics OBJECT IDENTIFIER ::= { otn 51 }
otuc4StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc4StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc4Statistics 1 }
otuc4StatisticsEntry OBJECT-TYPE
SYNTAX Otuc4StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc4StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc4StatisticsTable 1 }
Otuc4StatisticsEntry ::=
SEQUENCE {
otuc4StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc4StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc4StatisticsEntryBitErrorFec OCTET STRING,
otuc4StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc4StatisticsEntryErroredBlocks OCTET STRING,
otuc4StatisticsEntryErroredSeconds OCTET STRING,
otuc4StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc4StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc4StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc4StatisticsEntry 1 }
otuc4StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc4StatisticsEntry 2 }
otuc4StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc4StatisticsEntry 3 }
otuc4StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc4StatisticsEntry 4 }
otuc4StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc4StatisticsEntry 5 }
otuc4StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc4StatisticsEntry 6 }
otuc4StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc4StatisticsEntry 7 }
otuc4StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc4StatisticsEntry 8 }
otuc5 OBJECT IDENTIFIER ::= { otn 52 }
otuc5Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc5 object"
::= { otuc5 1 }
otuc5Entry OBJECT-TYPE
SYNTAX Otuc5Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc5Table"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc5Table 1 }
Otuc5Entry ::=
SEQUENCE {
otuc5FecType CoriantTypesOtukFec,
otuc5AdminStatus INTEGER,
otuc5OperStatus INTEGER,
otuc5AvailStatus BITS,
otuc5AliasName OCTET STRING,
otuc5ServiceLabel OCTET STRING,
otuc5ExpSapi CoriantTypesTtiType15,
otuc5ExpDapi CoriantTypesTtiType15,
otuc5ExpOperator CoriantTypesTtiType32,
otuc5TxSapi CoriantTypesTtiType15,
otuc5TxDapi CoriantTypesTtiType15,
otuc5TxOperator CoriantTypesTtiType32,
otuc5TimDefectMode CoriantTypesTimMode,
otuc5TimAct CoriantTypesEnableSwitch,
otuc5RxSapi OCTET STRING,
otuc5RxDapi OCTET STRING,
otuc5RxOperator OCTET STRING,
otuc5DegradeInterval Unsigned32,
otuc5DegradeThreshold Unsigned32,
otuc5ManagedBy INTEGER
}
otuc5FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc5Entry 1 }
otuc5AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc5Entry 2 }
otuc5OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc5Entry 3 }
otuc5AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc5Entry 4 }
otuc5AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc5Entry 5 }
otuc5ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc5Entry 6 }
otuc5ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc5Entry 7 }
otuc5ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc5Entry 8 }
otuc5ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc5Entry 9 }
otuc5TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc5Entry 10 }
otuc5TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc5Entry 11 }
otuc5TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc5Entry 12 }
otuc5TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc5Entry 13 }
otuc5TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc5Entry 14 }
otuc5RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc5Entry 15 }
otuc5RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc5Entry 16 }
otuc5RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc5Entry 17 }
otuc5DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc5Entry 18 }
otuc5DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :647712"
::= { otuc5Entry 19 }
otuc5ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc5Entry 20 }
otuc5Statistics OBJECT IDENTIFIER ::= { otn 53 }
otuc5StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc5StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc5Statistics 1 }
otuc5StatisticsEntry OBJECT-TYPE
SYNTAX Otuc5StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc5StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc5StatisticsTable 1 }
Otuc5StatisticsEntry ::=
SEQUENCE {
otuc5StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc5StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc5StatisticsEntryBitErrorFec OCTET STRING,
otuc5StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc5StatisticsEntryErroredBlocks OCTET STRING,
otuc5StatisticsEntryErroredSeconds OCTET STRING,
otuc5StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc5StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc5StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc5StatisticsEntry 1 }
otuc5StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc5StatisticsEntry 2 }
otuc5StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc5StatisticsEntry 3 }
otuc5StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc5StatisticsEntry 4 }
otuc5StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc5StatisticsEntry 5 }
otuc5StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc5StatisticsEntry 6 }
otuc5StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc5StatisticsEntry 7 }
otuc5StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc5StatisticsEntry 8 }
eth400g OBJECT IDENTIFIER ::= { otn 54 }
eth400gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth400gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the 400GBE object."
::= { eth400g 1 }
eth400gEntry OBJECT-TYPE
SYNTAX Eth400gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth400gTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth400gTable 1 }
Eth400gEntry ::=
SEQUENCE {
eth400gEthFecType CoriantTypesEthFec,
eth400gEthFecTypeState CoriantTypesEthFec,
eth400gTransmitInterpacketgap Unsigned32,
eth400gGfpPayloadFcs CoriantTypesEnableSwitch,
eth400gMappingMode INTEGER,
eth400gAdminStatus INTEGER,
eth400gOperStatus INTEGER,
eth400gAvailStatus BITS,
eth400gAliasName OCTET STRING,
eth400gClientShutdown CoriantTypesYesNo,
eth400gClientShutdownHoldoffTimer Unsigned32,
eth400gHoldoffSignal CoriantTypesYesNo,
eth400gNearEndAls CoriantTypesYesNo,
eth400gAlsDegradeMode CoriantTypesEnableSwitch,
eth400gLoopbackEnable CoriantTypesEnableSwitch,
eth400gLoopbackType INTEGER,
eth400gTestSignalType CoriantTypesTestSignalType,
eth400gTestSignalEnable CoriantTypesTestSignalConfig,
eth400gServiceLabel OCTET STRING,
eth400gManagedBy INTEGER,
eth400gLldpStatusIf INTEGER
}
eth400gEthFecType OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working type of etyn port.
default value :auto"
::= { eth400gEntry 1 }
eth400gEthFecTypeState OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working state of etyn port.
default value :disabled"
::= { eth400gEntry 2 }
eth400gTransmitInterpacketgap OBJECT-TYPE
SYNTAX Unsigned32 (8..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the minimum transmit IPG value.
default value :8"
::= { eth400gEntry 3 }
eth400gGfpPayloadFcs OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
default value :disabled"
::= { eth400gEntry 4 }
eth400gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { eth400gEntry 5 }
eth400gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { eth400gEntry 6 }
eth400gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { eth400gEntry 7 }
eth400gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { eth400gEntry 8 }
eth400gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { eth400gEntry 9 }
eth400gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { eth400gEntry 10 }
eth400gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { eth400gEntry 11 }
eth400gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { eth400gEntry 12 }
eth400gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { eth400gEntry 13 }
eth400gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { eth400gEntry 14 }
eth400gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { eth400gEntry 15 }
eth400gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { eth400gEntry 16 }
eth400gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { eth400gEntry 17 }
eth400gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { eth400gEntry 18 }
eth400gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { eth400gEntry 19 }
eth400gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { eth400gEntry 20 }
eth400gLldpStatusIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rxonly (2),
txandrx (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled"
::= { eth400gEntry 22 }
eth400gStatistics OBJECT IDENTIFIER ::= { otn 55 }
eth400gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth400gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth400gStatistics 1 }
eth400gStatisticsEntry OBJECT-TYPE
SYNTAX Eth400gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth400gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { eth400gStatisticsTable 1 }
Eth400gStatisticsEntry ::=
SEQUENCE {
eth400gStatisticsEntryLastClear IetfYangTypesDateAndTime,
eth400gStatisticsEntryLossOfSignalSeconds OCTET STRING,
eth400gStatisticsEntryBitErrorFec OCTET STRING,
eth400gStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
eth400gStatisticsEntryInSymbolErrors OCTET STRING,
eth400gStatisticsEntryInDropEvents OCTET STRING,
eth400gStatisticsEntryInOctets OCTET STRING,
eth400gStatisticsEntryInPackets OCTET STRING,
eth400gStatisticsEntryInBroadcastPackets OCTET STRING,
eth400gStatisticsEntryInMulticastPackets OCTET STRING,
eth400gStatisticsEntryInCrcAlignErrors OCTET STRING,
eth400gStatisticsEntryInUndersizePackets OCTET STRING,
eth400gStatisticsEntryInOversizePackets OCTET STRING,
eth400gStatisticsEntryInFragments OCTET STRING,
eth400gStatisticsEntryInJabbers OCTET STRING,
eth400gStatisticsEntryInPackets64octets OCTET STRING,
eth400gStatisticsEntryInPackets65to127octets OCTET STRING,
eth400gStatisticsEntryInPackets128to255octets OCTET STRING,
eth400gStatisticsEntryInPackets256to511octets OCTET STRING,
eth400gStatisticsEntryInPackets512to1023octets OCTET STRING,
eth400gStatisticsEntryInPackets1024to1518octets OCTET STRING,
eth400gStatisticsEntryOutSymbolErrors OCTET STRING,
eth400gStatisticsEntryOutDropEvents OCTET STRING,
eth400gStatisticsEntryOutOctets OCTET STRING,
eth400gStatisticsEntryOutPackets OCTET STRING,
eth400gStatisticsEntryOutBroadcastPackets OCTET STRING,
eth400gStatisticsEntryOutMulticastPackets OCTET STRING,
eth400gStatisticsEntryOutCrcAlignErrors OCTET STRING,
eth400gStatisticsEntryOutUndersizePackets OCTET STRING,
eth400gStatisticsEntryOutOversizePackets OCTET STRING,
eth400gStatisticsEntryOutFragments OCTET STRING,
eth400gStatisticsEntryOutJabbers OCTET STRING,
eth400gStatisticsEntryOutPackets64octets OCTET STRING,
eth400gStatisticsEntryOutPackets65to127octets OCTET STRING,
eth400gStatisticsEntryOutPackets128to255octets OCTET STRING,
eth400gStatisticsEntryOutPackets256to511octets OCTET STRING,
eth400gStatisticsEntryOutPackets512to1023octets OCTET STRING,
eth400gStatisticsEntryOutPackets1024to1518octets OCTET STRING,
eth400gStatisticsEntryInCodingViolation OCTET STRING,
eth400gStatisticsEntryErroredSeconds OCTET STRING,
eth400gStatisticsEntrySeverelyErroredSeconds OCTET STRING,
eth400gStatisticsEntryUnavailableSeconds OCTET STRING
}
eth400gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { eth400gStatisticsEntry 1 }
eth400gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { eth400gStatisticsEntry 2 }
eth400gStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { eth400gStatisticsEntry 3 }
eth400gStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { eth400gStatisticsEntry 4 }
eth400gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth400gStatisticsEntry 5 }
eth400gStatisticsEntryInDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth400gStatisticsEntry 6 }
eth400gStatisticsEntryInOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth400gStatisticsEntry 7 }
eth400gStatisticsEntryInPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth400gStatisticsEntry 8 }
eth400gStatisticsEntryInBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth400gStatisticsEntry 9 }
eth400gStatisticsEntryInMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth400gStatisticsEntry 10 }
eth400gStatisticsEntryInCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth400gStatisticsEntry 11 }
eth400gStatisticsEntryInUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth400gStatisticsEntry 12 }
eth400gStatisticsEntryInOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth400gStatisticsEntry 13 }
eth400gStatisticsEntryInFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth400gStatisticsEntry 14 }
eth400gStatisticsEntryInJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth400gStatisticsEntry 15 }
eth400gStatisticsEntryInPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 16 }
eth400gStatisticsEntryInPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 17 }
eth400gStatisticsEntryInPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 18 }
eth400gStatisticsEntryInPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 19 }
eth400gStatisticsEntryInPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 20 }
eth400gStatisticsEntryInPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 21 }
eth400gStatisticsEntryOutSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth400gStatisticsEntry 22 }
eth400gStatisticsEntryOutDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth400gStatisticsEntry 23 }
eth400gStatisticsEntryOutOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth400gStatisticsEntry 24 }
eth400gStatisticsEntryOutPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth400gStatisticsEntry 25 }
eth400gStatisticsEntryOutBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth400gStatisticsEntry 26 }
eth400gStatisticsEntryOutMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth400gStatisticsEntry 27 }
eth400gStatisticsEntryOutCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth400gStatisticsEntry 28 }
eth400gStatisticsEntryOutUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth400gStatisticsEntry 29 }
eth400gStatisticsEntryOutOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth400gStatisticsEntry 30 }
eth400gStatisticsEntryOutFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth400gStatisticsEntry 31 }
eth400gStatisticsEntryOutJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth400gStatisticsEntry 32 }
eth400gStatisticsEntryOutPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 33 }
eth400gStatisticsEntryOutPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 34 }
eth400gStatisticsEntryOutPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 35 }
eth400gStatisticsEntryOutPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 36 }
eth400gStatisticsEntryOutPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 37 }
eth400gStatisticsEntryOutPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth400gStatisticsEntry 38 }
eth400gStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { eth400gStatisticsEntry 39 }
eth400gStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { eth400gStatisticsEntry 40 }
eth400gStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { eth400gStatisticsEntry 41 }
eth400gStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { eth400gStatisticsEntry 42 }
oc48 OBJECT IDENTIFIER ::= { otn 56 }
oc48Table OBJECT-TYPE
SYNTAX SEQUENCE OF Oc48Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the OC48 object.
"
::= { oc48 1 }
oc48Entry OBJECT-TYPE
SYNTAX Oc48Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oc48Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { oc48Table 1 }
Oc48Entry ::=
SEQUENCE {
oc48MappingMode INTEGER,
oc48AdminStatus INTEGER,
oc48OperStatus INTEGER,
oc48AvailStatus BITS,
oc48AliasName OCTET STRING,
oc48ClientShutdown CoriantTypesYesNo,
oc48ClientShutdownHoldoffTimer Unsigned32,
oc48HoldoffSignal CoriantTypesYesNo,
oc48NearEndAls CoriantTypesYesNo,
oc48AlsDegradeMode CoriantTypesEnableSwitch,
oc48LoopbackEnable CoriantTypesEnableSwitch,
oc48LoopbackType INTEGER,
oc48TestSignalType CoriantTypesTestSignalType,
oc48TestSignalEnable CoriantTypesTestSignalConfig,
oc48ServiceLabel OCTET STRING,
oc48ManagedBy INTEGER,
oc48ExpTrc CoriantTypesTtiType15,
oc48TxTrc CoriantTypesTtiType15,
oc48RxTrc OCTET STRING,
oc48TimAct CoriantTypesEnableSwitch,
oc48TimMonitor CoriantTypesEnableSwitch,
oc48AisType INTEGER
}
oc48MappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { oc48Entry 1 }
oc48AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { oc48Entry 2 }
oc48OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { oc48Entry 3 }
oc48AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { oc48Entry 4 }
oc48AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oc48Entry 5 }
oc48ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { oc48Entry 6 }
oc48ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { oc48Entry 7 }
oc48HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { oc48Entry 8 }
oc48NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { oc48Entry 9 }
oc48AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { oc48Entry 10 }
oc48LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { oc48Entry 11 }
oc48LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { oc48Entry 12 }
oc48TestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { oc48Entry 13 }
oc48TestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { oc48Entry 14 }
oc48ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { oc48Entry 15 }
oc48ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { oc48Entry 16 }
oc48ExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { oc48Entry 17 }
oc48TxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { oc48Entry 18 }
oc48RxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { oc48Entry 19 }
oc48TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { oc48Entry 20 }
oc48TimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { oc48Entry 21 }
oc48AisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { oc48Entry 22 }
oc48Statistics OBJECT IDENTIFIER ::= { otn 57 }
oc48StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Oc48StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { oc48Statistics 1 }
oc48StatisticsEntry OBJECT-TYPE
SYNTAX Oc48StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oc48StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { oc48StatisticsTable 1 }
Oc48StatisticsEntry ::=
SEQUENCE {
oc48StatisticsEntryLastClear IetfYangTypesDateAndTime,
oc48StatisticsEntryLossOfSignalSeconds OCTET STRING,
oc48StatisticsEntryInCodingViolation OCTET STRING,
oc48StatisticsEntryInErroredSeconds OCTET STRING,
oc48StatisticsEntryInSeverelyErroredSeconds OCTET STRING,
oc48StatisticsEntryInUnavailableSeconds OCTET STRING,
oc48StatisticsEntryInSeverelyErroredFrameSecond OCTET STRING
}
oc48StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { oc48StatisticsEntry 1 }
oc48StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { oc48StatisticsEntry 2 }
oc48StatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { oc48StatisticsEntry 3 }
oc48StatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { oc48StatisticsEntry 4 }
oc48StatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { oc48StatisticsEntry 5 }
oc48StatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { oc48StatisticsEntry 6 }
oc48StatisticsEntryInSeverelyErroredFrameSecond OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS
UNITS:seconds
"
::= { oc48StatisticsEntry 7 }
stm16 OBJECT IDENTIFIER ::= { otn 58 }
stm16Table OBJECT-TYPE
SYNTAX SEQUENCE OF Stm16Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Represents the STM16 object.
"
::= { stm16 1 }
stm16Entry OBJECT-TYPE
SYNTAX Stm16Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of stm16Table"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { stm16Table 1 }
Stm16Entry ::=
SEQUENCE {
stm16MappingMode INTEGER,
stm16AdminStatus INTEGER,
stm16OperStatus INTEGER,
stm16AvailStatus BITS,
stm16AliasName OCTET STRING,
stm16ClientShutdown CoriantTypesYesNo,
stm16ClientShutdownHoldoffTimer Unsigned32,
stm16HoldoffSignal CoriantTypesYesNo,
stm16NearEndAls CoriantTypesYesNo,
stm16AlsDegradeMode CoriantTypesEnableSwitch,
stm16LoopbackEnable CoriantTypesEnableSwitch,
stm16LoopbackType INTEGER,
stm16TestSignalType CoriantTypesTestSignalType,
stm16TestSignalEnable CoriantTypesTestSignalConfig,
stm16ServiceLabel OCTET STRING,
stm16ManagedBy INTEGER,
stm16ExpTrc CoriantTypesTtiType15,
stm16TxTrc CoriantTypesTtiType15,
stm16RxTrc OCTET STRING,
stm16TimAct CoriantTypesEnableSwitch,
stm16TimMonitor CoriantTypesEnableSwitch,
stm16AisType INTEGER
}
stm16MappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { stm16Entry 1 }
stm16AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { stm16Entry 2 }
stm16OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { stm16Entry 3 }
stm16AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { stm16Entry 4 }
stm16AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { stm16Entry 5 }
stm16ClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { stm16Entry 6 }
stm16ClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { stm16Entry 7 }
stm16HoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { stm16Entry 8 }
stm16NearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { stm16Entry 9 }
stm16AlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { stm16Entry 10 }
stm16LoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { stm16Entry 11 }
stm16LoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { stm16Entry 12 }
stm16TestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { stm16Entry 13 }
stm16TestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { stm16Entry 14 }
stm16ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { stm16Entry 15 }
stm16ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { stm16Entry 16 }
stm16ExpTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected trc(trail trace identification)
"
::= { stm16Entry 17 }
stm16TxTrc OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter trc(trail trace identification)
Conditions:ancestor::card/switching-type = 'tdm'
"
::= { stm16Entry 18 }
stm16RxTrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received trc(trail trace identification)
"
::= { stm16Entry 19 }
stm16TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { stm16Entry 20 }
stm16TimMonitor OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of tim defect monitor mode
default value :disabled"
::= { stm16Entry 21 }
stm16AisType OBJECT-TYPE
SYNTAX INTEGER {
genericAis (0),
msAis (1),
aisL (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :Generic-AIS"
::= { stm16Entry 22 }
stm16Statistics OBJECT IDENTIFIER ::= { otn 59 }
stm16StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Stm16StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { stm16Statistics 1 }
stm16StatisticsEntry OBJECT-TYPE
SYNTAX Stm16StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of stm16StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { stm16StatisticsTable 1 }
Stm16StatisticsEntry ::=
SEQUENCE {
stm16StatisticsEntryLastClear IetfYangTypesDateAndTime,
stm16StatisticsEntryLossOfSignalSeconds OCTET STRING,
stm16StatisticsEntryInBackgroundBlockError OCTET STRING,
stm16StatisticsEntryInErroredSeconds OCTET STRING,
stm16StatisticsEntryInSeverelyErroredSeconds OCTET STRING,
stm16StatisticsEntryInUnavailableSeconds OCTET STRING,
stm16StatisticsEntryInOutOfFrameSeconds OCTET STRING
}
stm16StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { stm16StatisticsEntry 1 }
stm16StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { stm16StatisticsEntry 2 }
stm16StatisticsEntryInBackgroundBlockError OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for ingress errored blocks, corresponding to pm parameter BBE
UNITS:blocks
"
::= { stm16StatisticsEntry 3 }
stm16StatisticsEntryInErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { stm16StatisticsEntry 4 }
stm16StatisticsEntryInSeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { stm16StatisticsEntry 5 }
stm16StatisticsEntryInUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { stm16StatisticsEntry 6 }
stm16StatisticsEntryInOutOfFrameSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS
UNITS:seconds
"
::= { stm16StatisticsEntry 7 }
otuc7 OBJECT IDENTIFIER ::= { otn 60 }
otuc7Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc7Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc7 object"
::= { otuc7 1 }
otuc7Entry OBJECT-TYPE
SYNTAX Otuc7Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc7Table"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc7Table 1 }
Otuc7Entry ::=
SEQUENCE {
otuc7FecType CoriantTypesOtukFec,
otuc7AdminStatus INTEGER,
otuc7OperStatus INTEGER,
otuc7AvailStatus BITS,
otuc7AliasName OCTET STRING,
otuc7ServiceLabel OCTET STRING,
otuc7ExpSapi CoriantTypesTtiType15,
otuc7ExpDapi CoriantTypesTtiType15,
otuc7ExpOperator CoriantTypesTtiType32,
otuc7TxSapi CoriantTypesTtiType15,
otuc7TxDapi CoriantTypesTtiType15,
otuc7TxOperator CoriantTypesTtiType32,
otuc7TimDefectMode CoriantTypesTimMode,
otuc7TimAct CoriantTypesEnableSwitch,
otuc7RxSapi OCTET STRING,
otuc7RxDapi OCTET STRING,
otuc7RxOperator OCTET STRING,
otuc7ManagedBy INTEGER,
otuc7DegradeInterval Unsigned32,
otuc7DegradeThreshold Unsigned32
}
otuc7FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc7Entry 1 }
otuc7AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc7Entry 2 }
otuc7OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc7Entry 3 }
otuc7AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc7Entry 4 }
otuc7AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc7Entry 5 }
otuc7ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc7Entry 6 }
otuc7ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc7Entry 7 }
otuc7ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc7Entry 8 }
otuc7ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc7Entry 9 }
otuc7TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc7Entry 10 }
otuc7TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc7Entry 11 }
otuc7TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc7Entry 12 }
otuc7TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc7Entry 13 }
otuc7TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc7Entry 14 }
otuc7RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc7Entry 15 }
otuc7RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc7Entry 16 }
otuc7RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc7Entry 17 }
otuc7ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc7Entry 18 }
otuc7DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc7Entry 19 }
otuc7DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :906797"
::= { otuc7Entry 20 }
otuc7Statistics OBJECT IDENTIFIER ::= { otn 61 }
otuc7StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc7StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc7Statistics 1 }
otuc7StatisticsEntry OBJECT-TYPE
SYNTAX Otuc7StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc7StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc7StatisticsTable 1 }
Otuc7StatisticsEntry ::=
SEQUENCE {
otuc7StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc7StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc7StatisticsEntryBitErrorFec OCTET STRING,
otuc7StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc7StatisticsEntryErroredBlocks OCTET STRING,
otuc7StatisticsEntryErroredSeconds OCTET STRING,
otuc7StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc7StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc7StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc7StatisticsEntry 1 }
otuc7StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc7StatisticsEntry 2 }
otuc7StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc7StatisticsEntry 3 }
otuc7StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc7StatisticsEntry 4 }
otuc7StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc7StatisticsEntry 5 }
otuc7StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc7StatisticsEntry 6 }
otuc7StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc7StatisticsEntry 7 }
otuc7StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc7StatisticsEntry 8 }
otuc9 OBJECT IDENTIFIER ::= { otn 62 }
otuc9Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc9Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc9 object"
::= { otuc9 1 }
otuc9Entry OBJECT-TYPE
SYNTAX Otuc9Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc9Table"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc9Table 1 }
Otuc9Entry ::=
SEQUENCE {
otuc9FecType CoriantTypesOtukFec,
otuc9AdminStatus INTEGER,
otuc9OperStatus INTEGER,
otuc9AvailStatus BITS,
otuc9AliasName OCTET STRING,
otuc9ServiceLabel OCTET STRING,
otuc9ExpSapi CoriantTypesTtiType15,
otuc9ExpDapi CoriantTypesTtiType15,
otuc9ExpOperator CoriantTypesTtiType32,
otuc9TxSapi CoriantTypesTtiType15,
otuc9TxDapi CoriantTypesTtiType15,
otuc9TxOperator CoriantTypesTtiType32,
otuc9TimDefectMode CoriantTypesTimMode,
otuc9TimAct CoriantTypesEnableSwitch,
otuc9RxSapi OCTET STRING,
otuc9RxDapi OCTET STRING,
otuc9RxOperator OCTET STRING,
otuc9ManagedBy INTEGER,
otuc9DegradeInterval Unsigned32,
otuc9DegradeThreshold Unsigned32
}
otuc9FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc9Entry 1 }
otuc9AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc9Entry 2 }
otuc9OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc9Entry 3 }
otuc9AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc9Entry 4 }
otuc9AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc9Entry 5 }
otuc9ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc9Entry 6 }
otuc9ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc9Entry 7 }
otuc9ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc9Entry 8 }
otuc9ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc9Entry 9 }
otuc9TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc9Entry 10 }
otuc9TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc9Entry 11 }
otuc9TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc9Entry 12 }
otuc9TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc9Entry 13 }
otuc9TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc9Entry 14 }
otuc9RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc9Entry 15 }
otuc9RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc9Entry 16 }
otuc9RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc9Entry 17 }
otuc9ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc9Entry 18 }
otuc9DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc9Entry 19 }
otuc9DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :1165881"
::= { otuc9Entry 20 }
otuc9Statistics OBJECT IDENTIFIER ::= { otn 63 }
otuc9StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc9StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc9Statistics 1 }
otuc9StatisticsEntry OBJECT-TYPE
SYNTAX Otuc9StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc9StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc9StatisticsTable 1 }
Otuc9StatisticsEntry ::=
SEQUENCE {
otuc9StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc9StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc9StatisticsEntryBitErrorFec OCTET STRING,
otuc9StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc9StatisticsEntryErroredBlocks OCTET STRING,
otuc9StatisticsEntryErroredSeconds OCTET STRING,
otuc9StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc9StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc9StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc9StatisticsEntry 1 }
otuc9StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc9StatisticsEntry 2 }
otuc9StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc9StatisticsEntry 3 }
otuc9StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc9StatisticsEntry 4 }
otuc9StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc9StatisticsEntry 5 }
otuc9StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc9StatisticsEntry 6 }
otuc9StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc9StatisticsEntry 7 }
otuc9StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc9StatisticsEntry 8 }
otuc11 OBJECT IDENTIFIER ::= { otn 64 }
otuc11Table OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc11Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the otuc11 object"
::= { otuc11 1 }
otuc11Entry OBJECT-TYPE
SYNTAX Otuc11Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc11Table"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc11Table 1 }
Otuc11Entry ::=
SEQUENCE {
otuc11FecType CoriantTypesOtukFec,
otuc11AdminStatus INTEGER,
otuc11OperStatus INTEGER,
otuc11AvailStatus BITS,
otuc11AliasName OCTET STRING,
otuc11ServiceLabel OCTET STRING,
otuc11ExpSapi CoriantTypesTtiType15,
otuc11ExpDapi CoriantTypesTtiType15,
otuc11ExpOperator CoriantTypesTtiType32,
otuc11TxSapi CoriantTypesTtiType15,
otuc11TxDapi CoriantTypesTtiType15,
otuc11TxOperator CoriantTypesTtiType32,
otuc11TimDefectMode CoriantTypesTimMode,
otuc11TimAct CoriantTypesEnableSwitch,
otuc11RxSapi OCTET STRING,
otuc11RxDapi OCTET STRING,
otuc11RxOperator OCTET STRING,
otuc11ManagedBy INTEGER,
otuc11DegradeInterval Unsigned32,
otuc11DegradeThreshold Unsigned32
}
otuc11FecType OBJECT-TYPE
SYNTAX CoriantTypesOtukFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709"
::= { otuc11Entry 1 }
otuc11AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otuc11Entry 2 }
otuc11OperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otuc11Entry 3 }
otuc11AvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otuc11Entry 4 }
otuc11AliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otuc11Entry 5 }
otuc11ServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otuc11Entry 6 }
otuc11ExpSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected sapi(Source Access Point Identifier)
"
::= { otuc11Entry 7 }
otuc11ExpDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected dapi(Destination Access Point Identifier)
"
::= { otuc11Entry 8 }
otuc11ExpOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expected operator TTI
"
::= { otuc11Entry 9 }
otuc11TxSapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter sapi(Source Access Point Identifier)
"
::= { otuc11Entry 10 }
otuc11TxDapi OBJECT-TYPE
SYNTAX CoriantTypesTtiType15
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter dapi(Destination Access Point Identifier)
"
::= { otuc11Entry 11 }
otuc11TxOperator OBJECT-TYPE
SYNTAX CoriantTypesTtiType32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitter operator TTI
"
::= { otuc11Entry 12 }
otuc11TimDefectMode OBJECT-TYPE
SYNTAX CoriantTypesTimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The tim defect selection mode
default value :NONE"
::= { otuc11Entry 13 }
otuc11TimAct OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of inserting AIS by tim function
default value :disabled"
::= { otuc11Entry 14 }
otuc11RxSapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received sapi(Source Access Point Identifier)
"
::= { otuc11Entry 15 }
otuc11RxDapi OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received dapi(Destination Access Point Identifier)
"
::= { otuc11Entry 16 }
otuc11RxOperator OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received operator TTI
"
::= { otuc11Entry 17 }
otuc11ManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { otuc11Entry 18 }
otuc11DegradeInterval OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
default value :7"
::= { otuc11Entry 19 }
otuc11DegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..2590845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :1424967"
::= { otuc11Entry 20 }
otuc11Statistics OBJECT IDENTIFIER ::= { otn 65 }
otuc11StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Otuc11StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otuc11Statistics 1 }
otuc11StatisticsEntry OBJECT-TYPE
SYNTAX Otuc11StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otuc11StatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { otuc11StatisticsTable 1 }
Otuc11StatisticsEntry ::=
SEQUENCE {
otuc11StatisticsEntryLastClear IetfYangTypesDateAndTime,
otuc11StatisticsEntryLossOfSignalSeconds OCTET STRING,
otuc11StatisticsEntryBitErrorFec OCTET STRING,
otuc11StatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
otuc11StatisticsEntryErroredBlocks OCTET STRING,
otuc11StatisticsEntryErroredSeconds OCTET STRING,
otuc11StatisticsEntrySeverelyErroredSeconds OCTET STRING,
otuc11StatisticsEntryUnavailableSeconds OCTET STRING
}
otuc11StatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otuc11StatisticsEntry 1 }
otuc11StatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { otuc11StatisticsEntry 2 }
otuc11StatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { otuc11StatisticsEntry 3 }
otuc11StatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { otuc11StatisticsEntry 4 }
otuc11StatisticsEntryErroredBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for errored blocks, corresponding to pm parameter EB
UNITS:blocks
"
::= { otuc11StatisticsEntry 5 }
otuc11StatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { otuc11StatisticsEntry 6 }
otuc11StatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { otuc11StatisticsEntry 7 }
otuc11StatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { otuc11StatisticsEntry 8 }
eth1g OBJECT IDENTIFIER ::= { otn 66 }
eth1gTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth1gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth1g 1 }
eth1gEntry OBJECT-TYPE
SYNTAX Eth1gEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth1gTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { eth1gTable 1 }
Eth1gEntry ::=
SEQUENCE {
eth1gEthFecType CoriantTypesEthFec,
eth1gEthFecTypeState CoriantTypesEthFec,
eth1gTransmitInterpacketgap Unsigned32,
eth1gGfpPayloadFcs CoriantTypesEnableSwitch,
eth1gMappingMode INTEGER,
eth1gAdminStatus INTEGER,
eth1gOperStatus INTEGER,
eth1gAvailStatus BITS,
eth1gAliasName OCTET STRING,
eth1gClientShutdown CoriantTypesYesNo,
eth1gClientShutdownHoldoffTimer Unsigned32,
eth1gHoldoffSignal CoriantTypesYesNo,
eth1gNearEndAls CoriantTypesYesNo,
eth1gAlsDegradeMode CoriantTypesEnableSwitch,
eth1gLoopbackEnable CoriantTypesEnableSwitch,
eth1gLoopbackType INTEGER,
eth1gTestSignalType CoriantTypesTestSignalType,
eth1gTestSignalEnable CoriantTypesTestSignalConfig,
eth1gServiceLabel OCTET STRING,
eth1gManagedBy INTEGER,
eth1gLldpStatusIf INTEGER,
eth1gSpeed Unsigned32,
eth1gDuplex INTEGER,
eth1gMtu Unsigned32,
eth1gAutoNegotiation INTEGER,
eth1gCurrSpeed OCTET STRING,
eth1gCurrDuplex OCTET STRING
}
eth1gEthFecType OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working type of etyn port.
default value :auto"
::= { eth1gEntry 1 }
eth1gEthFecTypeState OBJECT-TYPE
SYNTAX CoriantTypesEthFec
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The FEC working state of etyn port.
default value :disabled"
::= { eth1gEntry 2 }
eth1gTransmitInterpacketgap OBJECT-TYPE
SYNTAX Unsigned32 (8..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the minimum transmit IPG value.
default value :8"
::= { eth1gEntry 3 }
eth1gGfpPayloadFcs OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
default value :disabled"
::= { eth1gEntry 4 }
eth1gMappingMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
gmp (1),
gfpF (2),
t40gbmpOdu2e (3),
preamble (4),
bmpFixedstuff (5),
bmp (6),
amp (7),
tttGmp (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mapping mode of client port packets into ODUk.
default value :not-applicable"
::= { eth1gEntry 5 }
eth1gAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { eth1gEntry 6 }
eth1gOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { eth1gEntry 7 }
eth1gAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { eth1gEntry 8 }
eth1gAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { eth1gEntry 9 }
eth1gClientShutdown OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of client-shutdown.
default value :no"
::= { eth1gEntry 10 }
eth1gClientShutdownHoldoffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0"
::= { eth1gEntry 11 }
eth1gHoldoffSignal OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value :no"
::= { eth1gEntry 12 }
eth1gNearEndAls OBJECT-TYPE
SYNTAX CoriantTypesYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of near end ALS.
default value :no"
::= { eth1gEntry 13 }
eth1gAlsDegradeMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switching of defect BERSD-ODU trig ALS
default value :disabled"
::= { eth1gEntry 14 }
eth1gLoopbackEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of loopback function.
default value :disabled"
::= { eth1gEntry 15 }
eth1gLoopbackType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
terminal (1),
facility (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of loopback function
default value :none"
::= { eth1gEntry 16 }
eth1gTestSignalType OBJECT-TYPE
SYNTAX CoriantTypesTestSignalType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type mode of test signal.
default value :NONE"
::= { eth1gEntry 17 }
eth1gTestSignalEnable OBJECT-TYPE
SYNTAX CoriantTypesTestSignalConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enable switching of test signal function
default value :NONE"
::= { eth1gEntry 18 }
eth1gServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { eth1gEntry 19 }
eth1gManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { eth1gEntry 20 }
eth1gLldpStatusIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
rxonly (2),
txandrx (3),
disabled (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled"
::= { eth1gEntry 21 }
eth1gSpeed OBJECT-TYPE
SYNTAX Unsigned32 (10|100|1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set speed of the interface, unit mbps.
This is for ETH facility.
default value :1000"
::= { eth1gEntry 22 }
eth1gDuplex OBJECT-TYPE
SYNTAX INTEGER {
half (0),
full (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set duplex selections.
default value :full"
::= { eth1gEntry 23 }
eth1gMtu OBJECT-TYPE
SYNTAX Unsigned32 (1280..1500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set Maximum Frame Size.
default value :1500"
::= { eth1gEntry 24 }
eth1gAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set Auto Negotiation: Enabled/Disabled.
default value :enabled"
::= { eth1gEntry 25 }
eth1gCurrSpeed OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "speed (UNKNOWN/AUTO/10/100/1000/10000) corresponding to the interface
"
::= { eth1gEntry 26 }
eth1gCurrDuplex OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "duplex (HALF/FULL) corresponding to the interface
"
::= { eth1gEntry 27 }
eth1gStatistics OBJECT IDENTIFIER ::= { otn 67 }
eth1gStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Eth1gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { eth1gStatistics 1 }
eth1gStatisticsEntry OBJECT-TYPE
SYNTAX Eth1gStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eth1gStatisticsTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { eth1gStatisticsTable 1 }
Eth1gStatisticsEntry ::=
SEQUENCE {
eth1gStatisticsEntryLastClear IetfYangTypesDateAndTime,
eth1gStatisticsEntryLossOfSignalSeconds OCTET STRING,
eth1gStatisticsEntryBitErrorFec OCTET STRING,
eth1gStatisticsEntryUncorrectedBlockErrorFec OCTET STRING,
eth1gStatisticsEntryInSymbolErrors OCTET STRING,
eth1gStatisticsEntryInDropEvents OCTET STRING,
eth1gStatisticsEntryInOctets OCTET STRING,
eth1gStatisticsEntryInPackets OCTET STRING,
eth1gStatisticsEntryInBroadcastPackets OCTET STRING,
eth1gStatisticsEntryInMulticastPackets OCTET STRING,
eth1gStatisticsEntryInCrcAlignErrors OCTET STRING,
eth1gStatisticsEntryInUndersizePackets OCTET STRING,
eth1gStatisticsEntryInOversizePackets OCTET STRING,
eth1gStatisticsEntryInFragments OCTET STRING,
eth1gStatisticsEntryInJabbers OCTET STRING,
eth1gStatisticsEntryInPackets64octets OCTET STRING,
eth1gStatisticsEntryInPackets65to127octets OCTET STRING,
eth1gStatisticsEntryInPackets128to255octets OCTET STRING,
eth1gStatisticsEntryInPackets256to511octets OCTET STRING,
eth1gStatisticsEntryInPackets512to1023octets OCTET STRING,
eth1gStatisticsEntryInPackets1024to1518octets OCTET STRING,
eth1gStatisticsEntryOutSymbolErrors OCTET STRING,
eth1gStatisticsEntryOutDropEvents OCTET STRING,
eth1gStatisticsEntryOutOctets OCTET STRING,
eth1gStatisticsEntryOutPackets OCTET STRING,
eth1gStatisticsEntryOutBroadcastPackets OCTET STRING,
eth1gStatisticsEntryOutMulticastPackets OCTET STRING,
eth1gStatisticsEntryOutCrcAlignErrors OCTET STRING,
eth1gStatisticsEntryOutUndersizePackets OCTET STRING,
eth1gStatisticsEntryOutOversizePackets OCTET STRING,
eth1gStatisticsEntryOutFragments OCTET STRING,
eth1gStatisticsEntryOutJabbers OCTET STRING,
eth1gStatisticsEntryOutPackets64octets OCTET STRING,
eth1gStatisticsEntryOutPackets65to127octets OCTET STRING,
eth1gStatisticsEntryOutPackets128to255octets OCTET STRING,
eth1gStatisticsEntryOutPackets256to511octets OCTET STRING,
eth1gStatisticsEntryOutPackets512to1023octets OCTET STRING,
eth1gStatisticsEntryOutPackets1024to1518octets OCTET STRING,
eth1gStatisticsEntryInCodingViolation OCTET STRING,
eth1gStatisticsEntryErroredSeconds OCTET STRING,
eth1gStatisticsEntrySeverelyErroredSeconds OCTET STRING,
eth1gStatisticsEntryUnavailableSeconds OCTET STRING
}
eth1gStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { eth1gStatisticsEntry 1 }
eth1gStatisticsEntryLossOfSignalSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for signal loss, corresponding to pm parameter loss
UNITS:seconds
"
::= { eth1gStatisticsEntry 2 }
eth1gStatisticsEntryBitErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC
UNITS:bits
"
::= { eth1gStatisticsEntry 3 }
eth1gStatisticsEntryUncorrectedBlockErrorFec OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC
UNITS:blocks
"
::= { eth1gStatisticsEntry 4 }
eth1gStatisticsEntryInSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth1gStatisticsEntry 5 }
eth1gStatisticsEntryInDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth1gStatisticsEntry 6 }
eth1gStatisticsEntryInOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth1gStatisticsEntry 7 }
eth1gStatisticsEntryInPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth1gStatisticsEntry 8 }
eth1gStatisticsEntryInBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth1gStatisticsEntry 9 }
eth1gStatisticsEntryInMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth1gStatisticsEntry 10 }
eth1gStatisticsEntryInCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth1gStatisticsEntry 11 }
eth1gStatisticsEntryInUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth1gStatisticsEntry 12 }
eth1gStatisticsEntryInOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth1gStatisticsEntry 13 }
eth1gStatisticsEntryInFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth1gStatisticsEntry 14 }
eth1gStatisticsEntryInJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth1gStatisticsEntry 15 }
eth1gStatisticsEntryInPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 16 }
eth1gStatisticsEntryInPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 17 }
eth1gStatisticsEntryInPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 18 }
eth1gStatisticsEntryInPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 19 }
eth1gStatisticsEntryInPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 20 }
eth1gStatisticsEntryInPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 21 }
eth1gStatisticsEntryOutSymbolErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE
UNITS:Events
"
::= { eth1gStatisticsEntry 22 }
eth1gStatisticsEntryOutDropEvents OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal drop events, corresponding to pm parameter DropEvents
UNITS:events
"
::= { eth1gStatisticsEntry 23 }
eth1gStatisticsEntryOutOctets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal octets, corresponding to pm parameter Octets
UNITS:octets
"
::= { eth1gStatisticsEntry 24 }
eth1gStatisticsEntryOutPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output signal packets, corresponding to pm parameter Pkts
UNITS:packets
"
::= { eth1gStatisticsEntry 25 }
eth1gStatisticsEntryOutBroadcastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts
UNITS:packets
"
::= { eth1gStatisticsEntry 26 }
eth1gStatisticsEntryOutMulticastPackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts
UNITS:packets
"
::= { eth1gStatisticsEntry 27 }
eth1gStatisticsEntryOutCrcAlignErrors OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors
UNITS:packets
"
::= { eth1gStatisticsEntry 28 }
eth1gStatisticsEntryOutUndersizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts
UNITS:packets
"
::= { eth1gStatisticsEntry 29 }
eth1gStatisticsEntryOutOversizePackets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts
UNITS:packets
"
::= { eth1gStatisticsEntry 30 }
eth1gStatisticsEntryOutFragments OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output fragment packets, corresponding to pm parameter Fragments
UNITS:packets
"
::= { eth1gStatisticsEntry 31 }
eth1gStatisticsEntryOutJabbers OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output jabber packets, corresponding to pm parameter Jabbers
UNITS:packets
"
::= { eth1gStatisticsEntry 32 }
eth1gStatisticsEntryOutPackets64octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 33 }
eth1gStatisticsEntryOutPackets65to127octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 34 }
eth1gStatisticsEntryOutPackets128to255octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 35 }
eth1gStatisticsEntryOutPackets256to511octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 36 }
eth1gStatisticsEntryOutPackets512to1023octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 37 }
eth1gStatisticsEntryOutPackets1024to1518octets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets
UNITS:packets
"
::= { eth1gStatisticsEntry 38 }
eth1gStatisticsEntryInCodingViolation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics bits counting for ingress coding violation, corresponding to pm parameter CV
UNITS:bits
"
::= { eth1gStatisticsEntry 39 }
eth1gStatisticsEntryErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for errored signal, corresponding to pm parameter ES
UNITS:seconds
"
::= { eth1gStatisticsEntry 40 }
eth1gStatisticsEntrySeverelyErroredSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for severely errored signal, corresponding to pm parameter SES
UNITS:seconds
"
::= { eth1gStatisticsEntry 41 }
eth1gStatisticsEntryUnavailableSeconds OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS
UNITS:seconds
"
::= { eth1gStatisticsEntry 42 }
servicesInfo OBJECT IDENTIFIER ::= { services 2 }
servicesRoadmTargetPowerMode OBJECT-TYPE
SYNTAX INTEGER {
psd (1),
power (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The optical power control mode of ocrs
default value :power"
::= { servicesInfo 1 }
cRS OBJECT IDENTIFIER ::= { services 3 }
cRSTable OBJECT-TYPE
SYNTAX SEQUENCE OF CRSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Cross connection table.
"
::= { cRS 1 }
cRSEntry OBJECT-TYPE
SYNTAX CRSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cRSTable"
INDEX { cRSSrcTp,cRSDstTp }
::= { cRSTable 1 }
CRSEntry ::=
SEQUENCE {
cRSSrcTp RowPointer,
cRSDstTp RowPointer,
cRSServiceLabel OCTET STRING,
cRSManagedBy INTEGER,
cRSAliasName OCTET STRING
}
cRSSrcTp OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Source tp of cross connection.
"
::= { cRSEntry 1 }
cRSDstTp OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Destination tp of cross connection.
"
::= { cRSEntry 2 }
cRSServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection.
"
::= { cRSEntry 3 }
cRSManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { cRSEntry 4 }
cRSAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { cRSEntry 5 }
fiberConnection OBJECT IDENTIFIER ::= { services 4 }
fiberConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF FiberConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Fiber connection table which will be user managed and be explicitly provisioned by user.
Fiber Connection indicates the physical fiber connection between physical ports or subports.
"
::= { fiberConnection 1 }
fiberConnectionEntry OBJECT-TYPE
SYNTAX FiberConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fiberConnectionTable"
INDEX { fiberConnectionSrcPort,fiberConnectionDstPort }
::= { fiberConnectionTable 1 }
FiberConnectionEntry ::=
SEQUENCE {
fiberConnectionSrcPort RowPointer,
fiberConnectionDstPort RowPointer,
fiberConnectionType INTEGER,
fiberConnectionFiberLabel OCTET STRING,
fiberConnectionAliasName OCTET STRING,
fiberConnectionFixAttenuationDst CoriantTypesDBPrecision1,
fiberConnectionFixAttenuationSrc CoriantTypesDBPrecision1
}
fiberConnectionSrcPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Source port of fiber connection.
"
::= { fiberConnectionEntry 1 }
fiberConnectionDstPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Destination port of fiber connection.
"
::= { fiberConnectionEntry 2 }
fiberConnectionType OBJECT-TYPE
SYNTAX INTEGER {
twoWay (1),
oneWay (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates fiber connection type.
default value :two-way"
::= { fiberConnectionEntry 3 }
fiberConnectionFiberLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Label of fiber connection.
"
::= { fiberConnectionEntry 4 }
fiberConnectionAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { fiberConnectionEntry 5 }
fiberConnectionFixAttenuationDst OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "external fixed attenuator's attenuation from src-port to dst-port
"
::= { fiberConnectionEntry 6 }
fiberConnectionFixAttenuationSrc OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "external attenuator's attenuation from dst-port to src-port
"
::= { fiberConnectionEntry 7 }
optical OBJECT IDENTIFIER ::= { services 5 }
ots OBJECT IDENTIFIER ::= { optical 2 }
otsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OtsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Optical Transmission Section (OTS) interface entity"
::= { ots 1 }
otsEntry OBJECT-TYPE
SYNTAX OtsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otsTable"
INDEX { otsName }
::= { otsTable 1 }
OtsEntry ::=
SEQUENCE {
otsName CoriantTypesNameIdentifier,
otsAdminStatus INTEGER,
otsOperStatus INTEGER,
otsAvailStatus BITS,
otsAliasName OCTET STRING,
otsSupportingRxPort OpticalCommonSupportingPort,
otsSupportingTxPort OpticalCommonSupportingPort,
otsMeasuredSpanLoss CoriantTypesOpticalDB,
otsFiberSpectralAttenuationTilt OCTET STRING,
otsRamanTiltCoefficient OCTET STRING,
otsFiberType INTEGER,
otsExternalTxAttenuation CoriantTypesDecimalFract2,
otsFiberLengthTx OCTET STRING,
otsFiberLengthTxDerived CoriantTypesDecimalFract3,
otsSpanDegradeEnable CoriantTypesEnableSwitch,
otsSpanDegradeLoss CoriantTypesOpticalDB,
otsSpanDegradeHysteresis CoriantTypesOpticalDB,
otsSpanLossReceive CoriantTypesDBPrecision3,
otsSpanLossTransmit CoriantTypesDBPrecision3,
otsIngressSpanLossAgingMargin CoriantTypesDBPrecision3,
otsEolMaxLoadPIn CoriantTypesOpticalPowerPrecision2,
otsServiceLabel OCTET STRING,
otsTargetPowerSetting INTEGER
}
otsName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the ots optical interface.
"
::= { otsEntry 1 }
otsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { otsEntry 2 }
otsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { otsEntry 3 }
otsAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { otsEntry 4 }
otsAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { otsEntry 5 }
otsSupportingRxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Rx port for the optical interface.
"
::= { otsEntry 6 }
otsSupportingTxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Tx port for the optical interface.
"
::= { otsEntry 7 }
otsMeasuredSpanLoss OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The measured span loss excluding offset.
"
::= { otsEntry 8 }
otsFiberSpectralAttenuationTilt OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Fiber Spectral Attenuation Tilt.
UNITS:dB
default value :unspecified"
::= { otsEntry 9 }
otsRamanTiltCoefficient OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Fiber Spectral Attenuation Tilt.
UNITS:dB/W
default value :unspecified"
::= { otsEntry 10 }
otsFiberType OBJECT-TYPE
SYNTAX INTEGER {
ssmf (1),
leaf (2),
twrs (3),
twc (4),
allwave (5),
dsf (6),
ls (7),
puresilica (8),
twreach (9),
vistacor (10),
teralight (11),
drakall (12),
twplus (13),
twminus (14),
pslc (15),
oleaf (16),
nzDsf (17),
ull (18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating fiber type of the OTS span.
default value :SSMF"
::= { otsEntry 11 }
otsExternalTxAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External padding attenuation at transmitting direction.
UNITS:dB
"
::= { otsEntry 12 }
otsFiberLengthTx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify the fiber length of transmitting direction.
UNITS:km
default value :auto"
::= { otsEntry 13 }
otsFiberLengthTxDerived OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Derived fiber length of transmitting direction.
UNITS:km
"
::= { otsEntry 14 }
otsSpanDegradeEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "switching for span degrade shutdown function
default value :disabled"
::= { otsEntry 15 }
otsSpanDegradeLoss OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The degrade threhsold for recieved span loss
default value :28"
::= { otsEntry 16 }
otsSpanDegradeHysteresis OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hysteresis of optical revocery threshold of recieved
default value :2"
::= { otsEntry 17 }
otsSpanLossReceive OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Span loss on the receiver side. Set by the controller and used by device to set AMP gain.
"
::= { otsEntry 20 }
otsSpanLossTransmit OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Span loss on the transmitter side. Set by the controller and used by device to configure MSA compliant channel launch power
"
::= { otsEntry 21 }
otsIngressSpanLossAgingMargin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Span-loss margin used to set optical amplifier gain and output-voa.
Day one attenuation of the link, at initial commissioning may increase across wdm link life.
span-loss-aging-margin defines the maximum additional loss the wdm link may experience in addition
to initial loss without requiring a new design (new amplifier settings).
default value :0"
::= { otsEntry 22 }
otsEolMaxLoadPIn OBJECT-TYPE
SYNTAX CoriantTypesOpticalPowerPrecision2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End Of Life Total input power at maximum load used for amplifier control.
Calculated during the design, this value shall be used by the amplifier device
for the setting so that the reasonable margin is kept to reach this value
at the end of life of the wdm link, considering span-loss aging margins are reached
"
::= { otsEntry 23 }
otsServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { otsEntry 24 }
otsTargetPowerSetting OBJECT-TYPE
SYNTAX INTEGER {
manual (0),
auto (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Allows automatic configuration of target values for oxcon.
default value :manual"
::= { otsEntry 25 }
oms OBJECT IDENTIFIER ::= { optical 3 }
omsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the optical multiplex section (OMS) interface MO"
::= { oms 1 }
omsEntry OBJECT-TYPE
SYNTAX OmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of omsTable"
INDEX { omsName }
::= { omsTable 1 }
OmsEntry ::=
SEQUENCE {
omsName CoriantTypesNameIdentifier,
omsAdminStatus INTEGER,
omsOperStatus INTEGER,
omsAvailStatus BITS,
omsAliasName OCTET STRING,
omsSupportingRxPort OpticalCommonSupportingPort,
omsSupportingTxPort OpticalCommonSupportingPort,
omsParentOtsInterface RowPointer,
omsRxOpticalPower OCTET STRING,
omsTxOpticalPower OCTET STRING,
omsGridMode CoriantTypesGridType,
omsInputChannelAttenuationControlMode OpticalCommonAttControlMode,
omsOutputChannelAttenuationControlMode OpticalCommonAttControlMode,
omsServiceLabel OCTET STRING,
omsWorkingMode OpticalCommonChannelWorkingMode
}
omsName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the oms optical interface.
"
::= { omsEntry 1 }
omsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { omsEntry 2 }
omsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { omsEntry 3 }
omsAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { omsEntry 4 }
omsAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { omsEntry 5 }
omsSupportingRxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Rx port for the optical interface.
"
::= { omsEntry 6 }
omsSupportingTxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Tx port for the optical interface.
"
::= { omsEntry 7 }
omsParentOtsInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting OTS interface.
"
::= { omsEntry 8 }
omsRxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
default value :not-available"
::= { omsEntry 9 }
omsTxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
default value :not-available"
::= { omsEntry 10 }
omsGridMode OBJECT-TYPE
SYNTAX CoriantTypesGridType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates Grid type of the OMS.
default value :not-applicable"
::= { omsEntry 11 }
omsInputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel which applicable to all channels of the oms.
default value :auto"
::= { omsEntry 13 }
omsOutputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel which applicable to all channels of the oms.
default value :auto"
::= { omsEntry 14 }
omsServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { omsEntry 15 }
omsWorkingMode OBJECT-TYPE
SYNTAX OpticalCommonChannelWorkingMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oms working mode for FOADM scenario
Conditions:deref(../supporting-rx-port)/../switching-type = 'amplifier'
default value :no-monitor"
::= { omsEntry 16 }
osc OBJECT IDENTIFIER ::= { optical 4 }
oscTable OBJECT-TYPE
SYNTAX SEQUENCE OF OscEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Optical Supervision Channel (OSC) MO"
::= { osc 1 }
oscEntry OBJECT-TYPE
SYNTAX OscEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oscTable"
INDEX { oscName }
::= { oscTable 1 }
OscEntry ::=
SEQUENCE {
oscName CoriantTypesNameIdentifier,
oscAdminStatus INTEGER,
oscOperStatus INTEGER,
oscAvailStatus BITS,
oscAliasName OCTET STRING,
oscSupportingRxPort OpticalCommonSupportingPort,
oscSupportingTxPort OpticalCommonSupportingPort,
oscParentOtsInterface OCTET STRING,
oscMode INTEGER,
oscWavelength OCTET STRING,
oscDataCommunication CoriantTypesEnableSwitch,
oscRxOpticalPower OCTET STRING,
oscTxOpticalPower OCTET STRING
}
oscName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the osc optical interface.
"
::= { oscEntry 1 }
oscAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { oscEntry 2 }
oscOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { oscEntry 3 }
oscAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { oscEntry 4 }
oscAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oscEntry 5 }
oscSupportingRxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Rx port for the optical interface.
"
::= { oscEntry 6 }
oscSupportingTxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Tx port for the optical interface.
"
::= { oscEntry 7 }
oscParentOtsInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting OTS insterface.
default value :unassigned"
::= { oscEntry 8 }
oscMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (0),
t155m52 (1),
t1gbe (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicating the current OSC mode.
default value :155M52"
::= { oscEntry 9 }
oscWavelength OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the wavelength band of the OSC channel.
UNITS:nm
default value :1510"
::= { oscEntry 10 }
oscDataCommunication OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configuration for enable or disable data communication network support of the OSC.
default value :enabled"
::= { oscEntry 11 }
oscRxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
default value :not-available"
::= { oscEntry 12 }
oscTxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
default value :not-available"
::= { oscEntry 13 }
gopt OBJECT IDENTIFIER ::= { optical 5 }
goptTable OBJECT-TYPE
SYNTAX SEQUENCE OF GoptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Generic Optical Section Interface (GOPT) MO"
::= { gopt 1 }
goptEntry OBJECT-TYPE
SYNTAX GoptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of goptTable"
INDEX { goptName }
::= { goptTable 1 }
GoptEntry ::=
SEQUENCE {
goptName CoriantTypesNameIdentifier,
goptAdminStatus INTEGER,
goptOperStatus INTEGER,
goptAvailStatus BITS,
goptAliasName OCTET STRING,
goptSupportingRxPort OpticalCommonSupportingPort,
goptSupportingTxPort OpticalCommonSupportingPort,
goptRxOpticalPower OCTET STRING,
goptTxOpticalPower OCTET STRING
}
goptName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the gopt optical interface.
"
::= { goptEntry 1 }
goptAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { goptEntry 2 }
goptOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { goptEntry 3 }
goptAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { goptEntry 4 }
goptAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { goptEntry 5 }
goptSupportingRxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Rx port for the optical interface.
"
::= { goptEntry 6 }
goptSupportingTxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Tx port for the optical interface.
"
::= { goptEntry 7 }
goptRxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
default value :not-available"
::= { goptEntry 8 }
goptTxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
default value :not-available"
::= { goptEntry 9 }
omsStatistics OBJECT IDENTIFIER ::= { optical 9 }
omsStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OmsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { omsStatistics 1 }
omsStatisticsEntry OBJECT-TYPE
SYNTAX OmsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of omsStatisticsTable"
INDEX { omsName }
::= { omsStatisticsTable 1 }
OmsStatisticsEntry ::=
SEQUENCE {
omsStatisticsEntryLastClear IetfYangTypesDateAndTime
}
omsStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { omsStatisticsEntry 1 }
oscStatistics OBJECT IDENTIFIER ::= { optical 10 }
oscStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OscStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { oscStatistics 1 }
oscStatisticsEntry OBJECT-TYPE
SYNTAX OscStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oscStatisticsTable"
INDEX { oscName }
::= { oscStatisticsTable 1 }
OscStatisticsEntry ::=
SEQUENCE {
oscStatisticsEntryLastClear IetfYangTypesDateAndTime
}
oscStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { oscStatisticsEntry 1 }
goptStatistics OBJECT IDENTIFIER ::= { optical 11 }
goptStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GoptStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { goptStatistics 1 }
goptStatisticsEntry OBJECT-TYPE
SYNTAX GoptStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of goptStatisticsTable"
INDEX { goptName }
::= { goptStatisticsTable 1 }
GoptStatisticsEntry ::=
SEQUENCE {
goptStatisticsEntryProtectionSwitchDuration OCTET STRING,
goptStatisticsEntryProtectionSwitchCount OCTET STRING,
goptStatisticsEntryLossTx OCTET STRING,
goptStatisticsEntryLossRx OCTET STRING,
goptStatisticsEntryLastClear IetfYangTypesDateAndTime
}
goptStatisticsEntryProtectionSwitchDuration OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protection Switch Duration, corresponding to pm parameter PSD
UNITS:seconds
"
::= { goptStatisticsEntry 1 }
goptStatisticsEntryProtectionSwitchCount OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protection Switch Count, corresponding to pm parameter PSC
UNITS:times
"
::= { goptStatisticsEntry 2 }
goptStatisticsEntryLossTx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX
UNITS:seconds
"
::= { goptStatisticsEntry 3 }
goptStatisticsEntryLossRx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Receive side, corresponding to pm parameter LOSS-RX
UNITS:seconds
"
::= { goptStatisticsEntry 4 }
goptStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { goptStatisticsEntry 5 }
och OBJECT IDENTIFIER ::= { optical 12 }
ochTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Optical Channel (OCH) MO"
::= { och 1 }
ochEntry OBJECT-TYPE
SYNTAX OchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochTable"
INDEX { ochName }
::= { ochTable 1 }
OchEntry ::=
SEQUENCE {
ochName CoriantTypesNameIdentifier,
ochAdminStatus INTEGER,
ochOperStatus INTEGER,
ochAvailStatus BITS,
ochAliasName OCTET STRING,
ochSupportingRxPort OpticalCommonSupportingPort,
ochSupportingTxPort OpticalCommonSupportingPort,
ochParentEntity OCTET STRING,
ochFrequency Unsigned32,
ochWavelength OCTET STRING,
ochRxOpticalPower OCTET STRING,
ochTxOpticalPower OCTET STRING,
ochWorkingMode OpticalCommonChannelWorkingMode
}
ochName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the och optical interface.
"
::= { ochEntry 1 }
ochAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { ochEntry 2 }
ochOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { ochEntry 3 }
ochAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { ochEntry 4 }
ochAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { ochEntry 5 }
ochSupportingRxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Rx port for the optical interface.
"
::= { ochEntry 6 }
ochSupportingTxPort OBJECT-TYPE
SYNTAX OpticalCommonSupportingPort
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting Tx port for the optical interface.
"
::= { ochEntry 7 }
ochParentEntity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supporting OMS interface.
default value :none"
::= { ochEntry 8 }
ochFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0|191300000..196125000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Frequency of the channel with unit MHz.
UNITS:MHz
"
::= { ochEntry 9 }
ochWavelength OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Wavelength of the channel with unit nm.
UNITS:nm
"
::= { ochEntry 10 }
ochRxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
default value :not-available"
::= { ochEntry 11 }
ochTxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
default value :not-available"
::= { ochEntry 12 }
ochWorkingMode OBJECT-TYPE
SYNTAX OpticalCommonChannelWorkingMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "och power control function mode
Conditions:name(deref(../parent-entity)) = 'oms'
default value :no-monitor"
::= { ochEntry 13 }
mc OBJECT IDENTIFIER ::= { optical 13 }
mcTable OBJECT-TYPE
SYNTAX SEQUENCE OF McEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Media Channel (MC) MO"
::= { mc 1 }
mcEntry OBJECT-TYPE
SYNTAX McEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of mcTable"
INDEX { mcName }
::= { mcTable 1 }
McEntry ::=
SEQUENCE {
mcName CoriantTypesNameIdentifier,
mcAdminStatus INTEGER,
mcOperStatus INTEGER,
mcAvailStatus BITS,
mcAliasName OCTET STRING,
mcParentEntity RowPointer,
mcLowerFrequency Unsigned32,
mcUpperFrequency Unsigned32,
mcCenterFrequency Unsigned32,
mcSlotWidth Unsigned32,
mcServiceLabel OCTET STRING
}
mcName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the mc optical interface.
"
::= { mcEntry 1 }
mcAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { mcEntry 2 }
mcOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { mcEntry 3 }
mcAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { mcEntry 4 }
mcAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { mcEntry 5 }
mcParentEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify supporting parent entity.
"
::= { mcEntry 6 }
mcLowerFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimal frequency of the mc with unit MHz.
UNITS:MHz
"
::= { mcEntry 7 }
mcUpperFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max frequency of the mc with unit MHz.
UNITS:MHz
"
::= { mcEntry 8 }
mcCenterFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Center frequency of the media channel (mc) with unit MHz.
UNITS:MHz
"
::= { mcEntry 9 }
mcSlotWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Slot width of the media channel (mc) with unit MHz.
UNITS:MHz
"
::= { mcEntry 10 }
mcServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { mcEntry 11 }
nmc OBJECT IDENTIFIER ::= { optical 14 }
nmcTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Network Media Channel (NMC) MO"
::= { nmc 1 }
nmcEntry OBJECT-TYPE
SYNTAX NmcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcTable"
INDEX { nmcName }
::= { nmcTable 1 }
NmcEntry ::=
SEQUENCE {
nmcName CoriantTypesNameIdentifier,
nmcAdminStatus INTEGER,
nmcOperStatus INTEGER,
nmcAvailStatus BITS,
nmcAliasName OCTET STRING,
nmcParentEntity RowPointer,
nmcCenterFrequency Unsigned32,
nmcWidth Unsigned32,
nmcActualCenterFrequency OCTET STRING,
nmcActualWidth OCTET STRING,
nmcActualPsd OCTET STRING,
nmcRxOpticalPower OCTET STRING,
nmcTxOpticalPower OCTET STRING,
nmcManagedBy INTEGER,
nmcActualOutputPsd CoriantTypesActualPsd,
nmcInputPsdMax NmcNmcPsd,
nmcInputPsdMin NmcNmcPsd,
nmcServiceLabel OCTET STRING,
nmcInputPowerMax OCTET STRING,
nmcInputPowerMin OCTET STRING
}
nmcName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the nmc optical interface.
"
::= { nmcEntry 1 }
nmcAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { nmcEntry 2 }
nmcOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { nmcEntry 3 }
nmcAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { nmcEntry 4 }
nmcAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { nmcEntry 5 }
nmcParentEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify supporting parent entity.
"
::= { nmcEntry 6 }
nmcCenterFrequency OBJECT-TYPE
SYNTAX Unsigned32 (184600000..196150000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Center frequency of the network media channel (nmc) with unit MHz.
UNITS:MHz
"
::= { nmcEntry 7 }
nmcWidth OBJECT-TYPE
SYNTAX Unsigned32 (15000..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Network media channel frequency width with unit MHz.
UNITS:MHz
"
::= { nmcEntry 8 }
nmcActualCenterFrequency OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual center frequency of the network media channel (nmc) with unit MHz.
default value :not-available"
::= { nmcEntry 9 }
nmcActualWidth OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual network media channel frequency width with unit MHz.
default value :not-available"
::= { nmcEntry 10 }
nmcActualPsd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual input power spectral density expressed in nanowatts per megahertz, nW/GHz.
default value :not-available"
::= { nmcEntry 11 }
nmcRxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Received optical power
default value :not-available"
::= { nmcEntry 12 }
nmcTxOpticalPower OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmitted optical power
default value :not-available"
::= { nmcEntry 13 }
nmcManagedBy OBJECT-TYPE
SYNTAX INTEGER {
system (1),
user (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
default value :user"
::= { nmcEntry 14 }
nmcActualOutputPsd OBJECT-TYPE
SYNTAX CoriantTypesActualPsd
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual output power spectral density expressed in nanowatts per megahertz, nW/GHz.
default value :not-available"
::= { nmcEntry 15 }
nmcInputPsdMax OBJECT-TYPE
SYNTAX NmcNmcPsd
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum valid input signal psd
Conditions:../../../roadm-target-power-mode = 'psd'
default value :not-available"
::= { nmcEntry 16 }
nmcInputPsdMin OBJECT-TYPE
SYNTAX NmcNmcPsd
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum valid input signal psd
Conditions:../../../roadm-target-power-mode = 'psd'
default value :not-available"
::= { nmcEntry 17 }
nmcServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection related facility.
default value :"
::= { nmcEntry 18 }
nmcInputPowerMax OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum valid input signal power
Conditions:../../../roadm-target-power-mode = 'power'
default value :not-available"
::= { nmcEntry 19 }
nmcInputPowerMin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum valid input signal power
Conditions:../../../roadm-target-power-mode = 'power'
default value :not-available"
::= { nmcEntry 20 }
nmcInput OBJECT IDENTIFIER ::= { optical 16 }
nmcInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { nmcInput 1 }
nmcInputEntry OBJECT-TYPE
SYNTAX NmcInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcInputTable"
INDEX { nmcName }
::= { nmcInputTable 1 }
NmcInputEntry ::=
SEQUENCE {
nmcInputInputChannelAttenuationControlMode OpticalCommonAttControlMode,
nmcInputActualAttenuation OCTET STRING,
nmcInputTargetAttenuation OCTET STRING
}
nmcInputInputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel.
default value :not-applicable"
::= { nmcInputEntry 1 }
nmcInputActualAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :not-available"
::= { nmcInputEntry 2 }
nmcInputTargetAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :max"
::= { nmcInputEntry 3 }
nmcOutput OBJECT IDENTIFIER ::= { optical 17 }
nmcOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { nmcOutput 1 }
nmcOutputEntry OBJECT-TYPE
SYNTAX NmcOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcOutputTable"
INDEX { nmcName }
::= { nmcOutputTable 1 }
NmcOutputEntry ::=
SEQUENCE {
nmcOutputOutputChannelAttenuationControlMode OpticalCommonAttControlMode,
nmcOutputActualAttenuation OCTET STRING,
nmcOutputTargetAttenuation OCTET STRING
}
nmcOutputOutputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel.
default value :not-applicable"
::= { nmcOutputEntry 1 }
nmcOutputActualAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :not-available"
::= { nmcOutputEntry 2 }
nmcOutputTargetAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :max"
::= { nmcOutputEntry 3 }
nmcStatistics OBJECT IDENTIFIER ::= { optical 18 }
nmcStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { nmcStatistics 1 }
nmcStatisticsEntry OBJECT-TYPE
SYNTAX NmcStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcStatisticsTable"
INDEX { nmcName }
::= { nmcStatisticsTable 1 }
NmcStatisticsEntry ::=
SEQUENCE {
nmcStatisticsEntryLossTx OCTET STRING,
nmcStatisticsEntryLastClear IetfYangTypesDateAndTime
}
nmcStatisticsEntryLossTx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX
UNITS:seconds
"
::= { nmcStatisticsEntry 1 }
nmcStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { nmcStatisticsEntry 2 }
otsStatistics OBJECT IDENTIFIER ::= { optical 19 }
otsStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF OtsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { otsStatistics 1 }
otsStatisticsEntry OBJECT-TYPE
SYNTAX OtsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of otsStatisticsTable"
INDEX { otsName }
::= { otsStatisticsTable 1 }
OtsStatisticsEntry ::=
SEQUENCE {
otsStatisticsEntryLastClear IetfYangTypesDateAndTime
}
otsStatisticsEntryLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { otsStatisticsEntry 1 }
ochInput OBJECT IDENTIFIER ::= { optical 21 }
ochInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ochInput 1 }
ochInputEntry OBJECT-TYPE
SYNTAX OchInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochInputTable"
INDEX { ochName }
::= { ochInputTable 1 }
OchInputEntry ::=
SEQUENCE {
ochInputInputChannelAttenuationControlMode OpticalCommonAttControlMode,
ochInputActualAttenuation OCTET STRING,
ochInputTargetAttenuation OCTET STRING
}
ochInputInputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel.
default value :not-applicable"
::= { ochInputEntry 1 }
ochInputActualAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :not-available"
::= { ochInputEntry 2 }
ochInputTargetAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :6"
::= { ochInputEntry 3 }
ochOutput OBJECT IDENTIFIER ::= { optical 22 }
ochOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ochOutput 1 }
ochOutputEntry OBJECT-TYPE
SYNTAX OchOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochOutputTable"
INDEX { ochName }
::= { ochOutputTable 1 }
OchOutputEntry ::=
SEQUENCE {
ochOutputOutputChannelAttenuationControlMode OpticalCommonAttControlMode,
ochOutputActualAttenuation OCTET STRING,
ochOutputTargetAttenuation OCTET STRING
}
ochOutputOutputChannelAttenuationControlMode OBJECT-TYPE
SYNTAX OpticalCommonAttControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specify attenuation control mode of the channel.
default value :not-applicable"
::= { ochOutputEntry 1 }
ochOutputActualAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :not-available"
::= { ochOutputEntry 2 }
ochOutputTargetAttenuation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actually setting attenuation.
UNITS:dB
default value :6"
::= { ochOutputEntry 3 }
lldp OBJECT IDENTIFIER ::= { services 6 }
lldpStatusNe OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Global lldp control on NE level.
Value of 'enabled', then the LLDP agent will receive,
but it will not transmit LLDP frames on all ports with port level lldp
not disabled of the NE.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on all ports of the NE. If there is remote systems
information which is received on ports supporting LLDP and stored in
the system before the lldp-status becomes disabled, then the information
will naturally age out.
default value :enabled"
::= { lldp 1 }
lldpMsgTxInterval OBJECT-TYPE
SYNTAX Unsigned32 (5..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP frame Retransmit Interval in seconds
default value :30"
::= { lldp 2 }
lldpMsgTxHoldMultiplier OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TTL value for the TLVs transmitter over wire in seconds
default value :4"
::= { lldp 3 }
oCRS OBJECT IDENTIFIER ::= { services 7 }
oCRSTable OBJECT-TYPE
SYNTAX SEQUENCE OF OCRSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Cross connection table.
"
::= { oCRS 1 }
oCRSEntry OBJECT-TYPE
SYNTAX OCRSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oCRSTable"
INDEX { oCRSSrcIf,oCRSDstIf }
::= { oCRSTable 1 }
OCRSEntry ::=
SEQUENCE {
oCRSSrcIf RowPointer,
oCRSDstIf RowPointer,
oCRSOpticalConnectionType INTEGER,
oCRSTargetPsdDst CoriantTypesDecimalFract2,
oCRSTargetPsdSrc CoriantTypesDecimalFract2,
oCRSServiceLabel OCTET STRING,
oCRSAliasName OCTET STRING,
oCRSTargetOutputPowerDst CoriantTypesOpticalPowerPrecision2,
oCRSTargetOutputPowerSrc CoriantTypesOpticalPowerPrecision2
}
oCRSSrcIf OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Source tp of cross connection.
"
::= { oCRSEntry 1 }
oCRSDstIf OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Destination tp of optical cross connection.
"
::= { oCRSEntry 2 }
oCRSOpticalConnectionType OBJECT-TYPE
SYNTAX INTEGER {
twoWay (1),
oneWay (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the cross connection type.
default value :one-way"
::= { oCRSEntry 3 }
oCRSTargetPsdDst OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination interface power spectral density expressed in nanowatts per
megahertz, nW/GHz. These units allow the value to often
be greater than 1.0. It also avoids dealing with zero values
for 0dBm. For example, a 40GHz wide channel
with 0dBm power would be:
0dBm = 1mW = 10^6nW
0dBm/40GHz = 10^6nW/40GHz = 1000000/40 = 25000
Conditions:../../roadm-target-power-mode = 'psd'
UNITS:nW/GHz
"
::= { oCRSEntry 4 }
oCRSTargetPsdSrc OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source interface power spectral density expressed in nanowatts per
gigahertz, nW/GHz. These units allow the value to often
be greater than 1.0. It also avoids dealing with zero values
for 0dBm. For example, a 40GHz wide channel
with 0dBm power would be:
0dBm = 1mW = 10^6nW
0dBm/40GHz = 10^6nW/40GHz = 1000000/40 = 25000
Conditions:(../optical-connection-type = 'two-way') and (../../roadm-target-power-mode = 'psd')
UNITS:nW/GHz
"
::= { oCRSEntry 5 }
oCRSServiceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path/service name of cross-connection.
"
::= { oCRSEntry 6 }
oCRSAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oCRSEntry 7 }
oCRSTargetOutputPowerDst OBJECT-TYPE
SYNTAX CoriantTypesOpticalPowerPrecision2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination interface target power
Conditions:../../roadm-target-power-mode = 'power'
"
::= { oCRSEntry 8 }
oCRSTargetOutputPowerSrc OBJECT-TYPE
SYNTAX CoriantTypesOpticalPowerPrecision2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source interface target power
Conditions:../../roadm-target-power-mode = 'power'
"
::= { oCRSEntry 9 }
internalLink OBJECT IDENTIFIER ::= { services 8 }
internalLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF InternalLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { internalLink 1 }
internalLinkEntry OBJECT-TYPE
SYNTAX InternalLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of internalLinkTable"
INDEX { internalLinkName,internalLinkSrcPort,internalLinkDstPort }
::= { internalLinkTable 1 }
InternalLinkEntry ::=
SEQUENCE {
internalLinkName OCTET STRING,
internalLinkSrcPort RowPointer,
internalLinkDstPort RowPointer
}
internalLinkName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { internalLinkEntry 1 }
internalLinkSrcPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { internalLinkEntry 2 }
internalLinkDstPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { internalLinkEntry 3 }
degree OBJECT IDENTIFIER ::= { services 9 }
degreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DegreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { degree 1 }
degreeEntry OBJECT-TYPE
SYNTAX DegreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of degreeTable"
INDEX { degreeNumber }
::= { degreeTable 1 }
DegreeEntry ::=
SEQUENCE {
degreeNumber Unsigned32,
degreeMaxChannels Unsigned32,
degreeGroupStatus BITS
}
degreeNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { degreeEntry 1 }
degreeMaxChannels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "maximum number of DWDM channels
"
::= { degreeEntry 2 }
degreeGroupStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
moduleMismatch (2),
topoFailed (3),
topoMismatch (4),
notPresent (5),
autoLaserShutdown (6),
idle (7),
busy (8),
initializing (9),
unknown (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group status for ROADM
"
::= { degreeEntry 3 }
modules OBJECT IDENTIFIER ::= { services 10 }
modulesTable OBJECT-TYPE
SYNTAX SEQUENCE OF ModulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "list for Cards associated with a degree"
::= { modules 1 }
modulesEntry OBJECT-TYPE
SYNTAX ModulesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of modulesTable"
INDEX { degreeNumber,sharedRiskGroupSrgNumber,modulesIndex }
::= { modulesTable 1 }
ModulesEntry ::=
SEQUENCE {
modulesIndex Unsigned32,
modulesSupportedCard RowPointer
}
modulesIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { modulesEntry 1 }
modulesSupportedCard OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { modulesEntry 2 }
connectionPorts OBJECT IDENTIFIER ::= { services 11 }
connectionPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ConnectionPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port associated with degree: One if bi-directional; two if uni-directional"
::= { connectionPorts 1 }
connectionPortsEntry OBJECT-TYPE
SYNTAX ConnectionPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of connectionPortsTable"
INDEX { degreeNumber,connectionPortsIndex }
::= { connectionPortsTable 1 }
ConnectionPortsEntry ::=
SEQUENCE {
connectionPortsIndex Unsigned32,
connectionPortsSupportedPort RowPointer
}
connectionPortsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { connectionPortsEntry 1 }
connectionPortsSupportedPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { connectionPortsEntry 2 }
associatedOtdrPort OBJECT IDENTIFIER ::= { services 12 }
associatedOtdrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AssociatedOtdrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "otdr port associated with degree."
::= { associatedOtdrPort 1 }
associatedOtdrPortEntry OBJECT-TYPE
SYNTAX AssociatedOtdrPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of associatedOtdrPortTable"
INDEX { degreeNumber }
::= { associatedOtdrPortTable 1 }
AssociatedOtdrPortEntry ::=
SEQUENCE {
associatedOtdrPortSupportedPort RowPointer
}
associatedOtdrPortSupportedPort OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { associatedOtdrPortEntry 1 }
mcCapabilities OBJECT IDENTIFIER ::= { services 13 }
mcCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF McCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Capabilities of the media channel on a degree or SRG. This is used to validate mc-ttp provisioning on degrees and SRGs."
::= { mcCapabilities 1 }
mcCapabilitiesEntry OBJECT-TYPE
SYNTAX McCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of mcCapabilitiesTable"
INDEX { degreeNumber,sharedRiskGroupSrgNumber }
::= { mcCapabilitiesTable 1 }
McCapabilitiesEntry ::=
SEQUENCE {
mcCapabilitiesSlotWidthGranularity CoriantTypesFreqRoadm,
mcCapabilitiesCenterFreqGranularity CoriantTypesFreqRoadm,
mcCapabilitiesMinSlots Unsigned32,
mcCapabilitiesMaxSlots Unsigned32
}
mcCapabilitiesSlotWidthGranularity OBJECT-TYPE
SYNTAX CoriantTypesFreqRoadm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Width of a slot measured in MHz.
default value :50000"
::= { mcCapabilitiesEntry 1 }
mcCapabilitiesCenterFreqGranularity OBJECT-TYPE
SYNTAX CoriantTypesFreqRoadm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Granularity of allowed center frequencies. The base frequency for this computation is 193100000 MHz (G.694.1)
default value :50000"
::= { mcCapabilitiesEntry 2 }
mcCapabilitiesMinSlots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum number of slots permitted to be joined together to form a media channel. Must be less than or equal to the max-slots
default value :1"
::= { mcCapabilitiesEntry 3 }
mcCapabilitiesMaxSlots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum number of slots permitted to be joined together to form a media channel. Must be greater than or equal to the min-slots
default value :1"
::= { mcCapabilitiesEntry 4 }
sharedRiskGroup OBJECT IDENTIFIER ::= { services 14 }
sharedRiskGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SharedRiskGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { sharedRiskGroup 1 }
sharedRiskGroupEntry OBJECT-TYPE
SYNTAX SharedRiskGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sharedRiskGroupTable"
INDEX { sharedRiskGroupSrgNumber }
::= { sharedRiskGroupTable 1 }
SharedRiskGroupEntry ::=
SEQUENCE {
sharedRiskGroupMaxAddDropPorts Unsigned32,
sharedRiskGroupCurrentProvisionedAddDropPorts Unsigned32,
sharedRiskGroupSrgNumber Unsigned32,
sharedRiskGroupWavelengthDuplication INTEGER,
sharedRiskGroupGridCapability INTEGER,
sharedRiskGroupGroupStatus BITS
}
sharedRiskGroupMaxAddDropPorts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The max number of ports available for a given srg
"
::= { sharedRiskGroupEntry 1 }
sharedRiskGroupCurrentProvisionedAddDropPorts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports currently provisioned for a given srg.
"
::= { sharedRiskGroupEntry 2 }
sharedRiskGroupSrgNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { sharedRiskGroupEntry 3 }
sharedRiskGroupWavelengthDuplication OBJECT-TYPE
SYNTAX INTEGER {
onePerSrg (1),
onePerDegree (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the SRG can handle duplicate wavelengths and if so to what extent.
default value :one-per-srg"
::= { sharedRiskGroupEntry 4 }
sharedRiskGroupGridCapability OBJECT-TYPE
SYNTAX INTEGER {
colorless (1),
colored (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The srg grid capability selected by request
default value :colorless"
::= { sharedRiskGroupEntry 5 }
sharedRiskGroupGroupStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
moduleMismatch (2),
topoFailed (3),
topoMismatch (4),
notPresent (5),
autoLaserShutdown (6),
idle (7),
busy (8),
initializing (9),
unknown (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group status for ROADM
"
::= { sharedRiskGroupEntry 6 }
performance OBJECT IDENTIFIER ::= { groove 5 }
performanceInfo OBJECT IDENTIFIER ::= { performance 1 }
performancePmdaystart OBJECT-TYPE
SYNTAX Unsigned32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Specifies the hour of starting collecting 1-DAY monitoring parameters.
To reset the NE clock to the default value of 00:00 hours, the parameter should contain the value 0.
UNITS:hour
default value :0"
::= { performanceInfo 1 }
performanceStatisticsEnable OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The global switch for all system statistics data collection.
default value :enabled"
::= { performanceInfo 2 }
pmPoint OBJECT IDENTIFIER ::= { performance 2 }
pmPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of performance monitoring points associated with the monitored management object."
::= { pmPoint 1 }
pmPointEntry OBJECT-TYPE
SYNTAX PmPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pmPointTable"
INDEX { pmPointPmEntity,pmPointPmpType,pmPointPmTimePeriod }
::= { pmPointTable 1 }
PmPointEntry ::=
SEQUENCE {
pmPointPmEntity CoriantPmtypesPmInstance,
pmPointPmpType CoriantPmtypesPmpType,
pmPointPmTimePeriod CoriantTypesManagementTimePeriod,
pmPointSupervisionSwitch CoriantTypesEnableSwitch,
pmPointThresholdingSwitch CoriantTypesEnableSwitch,
pmPointHistoryRecording CoriantTypesEnableSwitch
}
pmPointPmEntity OBJECT-TYPE
SYNTAX CoriantPmtypesPmInstance
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the management object instance the performance monitoring data are collected for.
"
::= { pmPointEntry 1 }
pmPointPmpType OBJECT-TYPE
SYNTAX CoriantPmtypesPmpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the type of performance monitoring point.
"
::= { pmPointEntry 2 }
pmPointPmTimePeriod OBJECT-TYPE
SYNTAX CoriantTypesManagementTimePeriod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the time-period increments during which PM data are collected.
"
::= { pmPointEntry 3 }
pmPointSupervisionSwitch OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable/disable counting for all performance monitoring parameters of the given PMP.
default value :disabled"
::= { pmPointEntry 4 }
pmPointThresholdingSwitch OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point.
default value :disabled"
::= { pmPointEntry 5 }
pmPointHistoryRecording OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable/disable the history data storage for all performance monitoring parameters of the given PM point.
default value :enabled"
::= { pmPointEntry 6 }
pmData OBJECT IDENTIFIER ::= { performance 3 }
pmDataCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmDataCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defines the get-pm output of record performance data for current time"
::= { pmData 2 }
pmDataCurrentEntry OBJECT-TYPE
SYNTAX PmDataCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pmDataCurrentTable"
INDEX { pmPointPmEntity, pmPointPmpType, pmPointPmTimePeriod, pmDataCurrentPmParameter }
::= { pmDataCurrentTable 1 }
PmDataCurrentEntry ::=
SEQUENCE {
pmDataCurrentMonitoringDateTime OCTET STRING,
pmDataCurrentPmParameter CoriantPmtypesPmParameter,
pmDataCurrentPmValue OCTET STRING,
pmDataCurrentPmUnit CoriantCommonpmUnitOfValue,
pmDataCurrentValidity CoriantPmtypesValidityType
}
pmDataCurrentMonitoringDateTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitoring data and time'
"
::= { pmDataCurrentEntry 1 }
pmDataCurrentPmParameter OBJECT-TYPE
SYNTAX CoriantPmtypesPmParameter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
"
::= { pmDataCurrentEntry 2 }
pmDataCurrentPmValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
PM counter or gauge value of the PM parameter.
"
::= { pmDataCurrentEntry 3 }
pmDataCurrentPmUnit OBJECT-TYPE
SYNTAX CoriantCommonpmUnitOfValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Unit of PM value.
"
::= { pmDataCurrentEntry 4 }
pmDataCurrentValidity OBJECT-TYPE
SYNTAX CoriantPmtypesValidityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether or not a performance monitoring value is valid.
"
::= { pmDataCurrentEntry 5 }
pmDataLatestHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmDataLatestHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defines the get-pm output of record performance data for latest history time"
::= { pmData 3 }
pmDataLatestHistoryEntry OBJECT-TYPE
SYNTAX PmDataLatestHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pmDataLatestHistoryTable"
INDEX { pmPointPmEntity, pmPointPmpType, pmPointPmTimePeriod, pmDataLatestHistoryPmParameter }
::= { pmDataLatestHistoryTable 1 }
PmDataLatestHistoryEntry ::=
SEQUENCE {
pmDataLatestHistoryMonitoringDateTime OCTET STRING,
pmDataLatestHistoryPmParameter CoriantPmtypesPmParameter,
pmDataLatestHistoryPmValue OCTET STRING,
pmDataLatestHistoryPmUnit CoriantCommonpmUnitOfValue,
pmDataLatestHistoryValidity CoriantPmtypesValidityType
}
pmDataLatestHistoryMonitoringDateTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitoring data and time'
"
::= { pmDataLatestHistoryEntry 1 }
pmDataLatestHistoryPmParameter OBJECT-TYPE
SYNTAX CoriantPmtypesPmParameter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
"
::= { pmDataLatestHistoryEntry 2 }
pmDataLatestHistoryPmValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
PM counter or gauge value of the PM parameter.
"
::= { pmDataLatestHistoryEntry 3 }
pmDataLatestHistoryPmUnit OBJECT-TYPE
SYNTAX CoriantCommonpmUnitOfValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Unit of PM value.
"
::= { pmDataLatestHistoryEntry 4 }
pmDataLatestHistoryValidity OBJECT-TYPE
SYNTAX CoriantPmtypesValidityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether or not a performance monitoring value is valid.
"
::= { pmDataLatestHistoryEntry 5 }
pmDataHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmDataHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defines the get-pm output of record performance data for history"
::= { pmData 4 }
pmDataHistoryEntry OBJECT-TYPE
SYNTAX PmDataHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pmDataHistoryTable"
INDEX { pmPointPmEntity, pmPointPmpType, pmPointPmTimePeriod, pmDataHistoryRecordIndex,pmDataHistoryPmParameter }
::= { pmDataHistoryTable 1 }
PmDataHistoryEntry ::=
SEQUENCE {
pmDataHistoryRecordIndex Unsigned32,
pmDataHistoryMonitoringDateTime OCTET STRING,
pmDataHistoryPmParameter CoriantPmtypesPmParameter,
pmDataHistoryPmValue OCTET STRING,
pmDataHistoryPmUnit CoriantCommonpmUnitOfValue,
pmDataHistoryValidity CoriantPmtypesValidityType
}
pmDataHistoryRecordIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of PM data records.
"
::= { pmDataHistoryEntry 1 }
pmDataHistoryMonitoringDateTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Monitoring data and time'
"
::= { pmDataHistoryEntry 2 }
pmDataHistoryPmParameter OBJECT-TYPE
SYNTAX CoriantPmtypesPmParameter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
"
::= { pmDataHistoryEntry 3 }
pmDataHistoryPmValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
PM counter or gauge value of the PM parameter.
"
::= { pmDataHistoryEntry 4 }
pmDataHistoryPmUnit OBJECT-TYPE
SYNTAX CoriantCommonpmUnitOfValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Unit of PM value.
"
::= { pmDataHistoryEntry 5 }
pmDataHistoryValidity OBJECT-TYPE
SYNTAX CoriantPmtypesValidityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether or not a performance monitoring value is valid.
"
::= { pmDataHistoryEntry 6 }
pmThresholdsValue OBJECT IDENTIFIER ::= { performance 4 }
pmThresholdsValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmThresholdsValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of entries of performance monitoring threshold value."
::= { pmThresholdsValue 1 }
pmThresholdsValueEntry OBJECT-TYPE
SYNTAX PmThresholdsValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pmThresholdsValueTable"
INDEX { pmPointPmEntity,pmPointPmpType,pmPointPmTimePeriod,pmThresholdsValuePmParameter }
::= { pmThresholdsValueTable 1 }
PmThresholdsValueEntry ::=
SEQUENCE {
pmThresholdsValuePmParameter CoriantPmtypesPmParameter,
pmThresholdsValuePmHighThreshold CoriantCommonpmThresholdValue,
pmThresholdsValuePmLowThreshold CoriantCommonpmThresholdValue,
pmThresholdsValuePmUnit CoriantCommonpmUnitOfValue
}
pmThresholdsValuePmParameter OBJECT-TYPE
SYNTAX CoriantPmtypesPmParameter
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.
"
::= { pmThresholdsValueEntry 1 }
pmThresholdsValuePmHighThreshold OBJECT-TYPE
SYNTAX CoriantCommonpmThresholdValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the desired high threshold value of the selected performance monitoring parameter.
"
::= { pmThresholdsValueEntry 2 }
pmThresholdsValuePmLowThreshold OBJECT-TYPE
SYNTAX CoriantCommonpmThresholdValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the desired low threshold value of the selected performance monitoring parameter.
"
::= { pmThresholdsValueEntry 3 }
pmThresholdsValuePmUnit OBJECT-TYPE
SYNTAX CoriantCommonpmUnitOfValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unit of the performance monitoring value.
"
::= { pmThresholdsValueEntry 4 }
networking OBJECT IDENTIFIER ::= { groove 6 }
networkingInfo OBJECT IDENTIFIER ::= { networking 1 }
networkingSourceAddressSelectMode OBJECT-TYPE
SYNTAX INTEGER {
loopbackPrefer (1),
linkPrefer (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Select the source address for route next-hop entry.
default value :link-prefer"
::= { networkingInfo 1 }
networkingReservedSubnet OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Prefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION "reserved subnet for internal use, prefix-length should be 24.
default value :192.168.199.0/24"
::= { networkingInfo 2 }
interface OBJECT IDENTIFIER ::= { networking 2 }
interfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of configured interfaces on the device."
::= { interface 1 }
interfaceEntry OBJECT-TYPE
SYNTAX InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of interfaceTable"
INDEX { interfaceIfName }
::= { interfaceTable 1 }
InterfaceEntry ::=
SEQUENCE {
interfaceIfName OCTET STRING,
interfaceIfDescription OCTET STRING,
interfaceIfType INTEGER,
interfaceAdminStatus INTEGER,
interfaceOperStatus INTEGER,
interfaceAvailStatus BITS,
interfaceAliasName OCTET STRING
}
interfaceIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the interface.
"
::= { interfaceEntry 1 }
interfaceIfDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A textual description of the interface.
"
::= { interfaceEntry 2 }
interfaceIfType OBJECT-TYPE
SYNTAX INTEGER {
other (0),
ethernetcsmacd (1),
ppp (2),
softwareloopback (3),
lapd (4),
oscx (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers
"
::= { interfaceEntry 3 }
interfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { interfaceEntry 4 }
interfaceOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :down"
::= { interfaceEntry 5 }
interfaceAvailStatus OBJECT-TYPE
SYNTAX BITS {
none (0),
failed (1),
mismatch (2),
lowerLayerDown (3),
notPresent (4),
shutdown (5),
degraded (6),
idle (7),
busy (8),
hibernation (9),
inTest (10),
loopback (11),
softwareUpgrade (12),
initializing (13),
unknown (14),
incomplete (15),
laserSafetyShutoff (16),
measuring (17),
firmwareLoading (18),
connected (19),
communicationFailed (20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition.
Following available status indication shall be supported:
Failed,Mismatch,LowerLayerDown,NotPresent,Shutdown,Degraded,Idle,Busy,
Hibernation,In-Test,Loopback,SoftwareUpgrade,Initializing,Unknown,Incomplete
Example: an ODU can be failed without cross connection, the available status is 'Failed Idle'.
Provided to qualify the operational, usage and/or administrative state attributes. The value of each
status attribute may denote the presence of one or more particular conditions applicable to the resource.
"
::= { interfaceEntry 6 }
interfaceAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { interfaceEntry 7 }
ethernet OBJECT IDENTIFIER ::= { networking 3 }
ethernetTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Ethernet attributes of an Ethernet interface."
::= { ethernet 1 }
ethernetEntry OBJECT-TYPE
SYNTAX EthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ethernetTable"
INDEX { interfaceIfName }
::= { ethernetTable 1 }
EthernetEntry ::=
SEQUENCE {
ethernetAutoNegotiation CoriantTypesEnableSwitch,
ethernetDuplexMode CoriantTypesDuplexMode,
ethernetOperationalDuplexMode CoriantTypesDuplexMode,
ethernetRate CoriantTypesEthernetRate,
ethernetOperationalEthernetRate CoriantTypesEthernetRate,
ethernetFlowControl CoriantTypesFlowControl,
ethernetOperationalFlowControl CoriantTypesFlowControl,
ethernetMacAddress IetfYangTypesMacAddress,
ethernetAliasName OCTET STRING,
ethernetEthResourceRef RowPointer
}
ethernetAutoNegotiation OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto negotiation mode.
default value :enabled"
::= { ethernetEntry 1 }
ethernetDuplexMode OBJECT-TYPE
SYNTAX CoriantTypesDuplexMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Duplex Mode; only valid if auto negotiation is disabled.
default value :full"
::= { ethernetEntry 2 }
ethernetOperationalDuplexMode OBJECT-TYPE
SYNTAX CoriantTypesDuplexMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational duplex mode.
default value :NA"
::= { ethernetEntry 3 }
ethernetRate OBJECT-TYPE
SYNTAX CoriantTypesEthernetRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Required Ethernet Rate; only valid if auto negotiation is disabled.
default value :max-rate"
::= { ethernetEntry 4 }
ethernetOperationalEthernetRate OBJECT-TYPE
SYNTAX CoriantTypesEthernetRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation ethernet rate.
default value :NA"
::= { ethernetEntry 5 }
ethernetFlowControl OBJECT-TYPE
SYNTAX CoriantTypesFlowControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the type of flow control to be supported.
default value :tx-rx"
::= { ethernetEntry 6 }
ethernetOperationalFlowControl OBJECT-TYPE
SYNTAX CoriantTypesFlowControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational flow control.
default value :NA"
::= { ethernetEntry 7 }
ethernetMacAddress OBJECT-TYPE
SYNTAX IetfYangTypesMacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC Address of the port.
default value :00:00:00:00:00:00"
::= { ethernetEntry 8 }
ethernetAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { ethernetEntry 9 }
ethernetEthResourceRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the lower layer resource associated with this interface.
"
::= { ethernetEntry 10 }
ppp OBJECT IDENTIFIER ::= { networking 4 }
pppTable OBJECT-TYPE
SYNTAX SEQUENCE OF PppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ppp 1 }
pppEntry OBJECT-TYPE
SYNTAX PppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pppTable"
INDEX { interfaceIfName }
::= { pppTable 1 }
PppEntry ::=
SEQUENCE {
pppType INTEGER,
pppPfRef RowPointer,
pppResourceRef RowPointer,
pppAliasName OCTET STRING,
pppPeerIpAddress IetfInetTypesIpv4AddressNoZone
}
pppType OBJECT-TYPE
SYNTAX INTEGER {
gcc0 (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the link type associated with the ppp.
"
::= { pppEntry 1 }
pppPfRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the ppp profile.
"
::= { pppEntry 2 }
pppResourceRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the lower layer resource associated with this interface.
"
::= { pppEntry 3 }
pppAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { pppEntry 4 }
pppPeerIpAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpv4AddressNoZone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address on the peer node.
default value :0.0.0.0"
::= { pppEntry 5 }
ipv4 OBJECT IDENTIFIER ::= { networking 5 }
ipv4Table OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Parameters for the IPv4 address family."
::= { ipv4 1 }
ipv4Entry OBJECT-TYPE
SYNTAX Ipv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipv4Table"
INDEX { interfaceIfName }
::= { ipv4Table 1 }
Ipv4Entry ::=
SEQUENCE {
ipv4Forwarding TruthValue,
ipv4Mtu Unsigned32,
ipv4AddressAssignmentMethod INTEGER,
ipv4ProxyArp TruthValue
}
ipv4Forwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Controls IPv4 packet forwarding of datagrams received by,
but not addressed to, this interface. IPv4 routers
forward datagrams. IPv4 hosts do not (except those
source-routed via the host).
default value :true"
::= { ipv4Entry 1 }
ipv4Mtu OBJECT-TYPE
SYNTAX Unsigned32 (68..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size, in octets, of the largest IPv4 packet that the
interface will send and receive.
The server may restrict the allowed values for this leaf,
depending on the interface's type.
All interfaces except LOOPBACK range 68..1500, octets.
If this leaf is not configured, the operationally used MTU
depends on the interface's type.
UNITS:octets
default value :1500"
::= { ipv4Entry 2 }
ipv4AddressAssignmentMethod OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dhcp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv4 address assignment method.
default value :static"
::= { ipv4Entry 3 }
ipv4ProxyArp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Proxy ARP switch on an ethernetCsmacd interface.
Conditions:../../if-type = 'ethernetCsmacd'
default value :false"
::= { ipv4Entry 4 }
ipAddress OBJECT IDENTIFIER ::= { networking 6 }
ipAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address on the interface."
::= { ipAddress 1 }
ipAddressEntry OBJECT-TYPE
SYNTAX IpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipAddressTable"
INDEX { interfaceIfName }
::= { ipAddressTable 1 }
IpAddressEntry ::=
SEQUENCE {
ipAddressIp IetfInetTypesIpv4AddressNoZone,
ipAddressOrigin INTEGER,
ipAddressPrefixLength Unsigned32
}
ipAddressIp OBJECT-TYPE
SYNTAX IetfInetTypesIpv4AddressNoZone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address on the interface.
"
::= { ipAddressEntry 1 }
ipAddressOrigin OBJECT-TYPE
SYNTAX INTEGER {
other (1),
static (2),
dhcp (3),
linkLayer (4),
random (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The origin of this address.
default value :static"
::= { ipAddressEntry 2 }
ipAddressPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The length of the subnet prefix.
"
::= { ipAddressEntry 3 }
ipUnnumbered OBJECT IDENTIFIER ::= { networking 7 }
ipUnnumberedTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpUnnumberedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP unnumbered configurations."
::= { ipUnnumbered 1 }
ipUnnumberedEntry OBJECT-TYPE
SYNTAX IpUnnumberedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipUnnumberedTable"
INDEX { interfaceIfName }
::= { ipUnnumberedTable 1 }
IpUnnumberedEntry ::=
SEQUENCE {
ipUnnumberedUnnumEnabled TruthValue,
ipUnnumberedParentInterface RowPointer
}
ipUnnumberedUnnumEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration.
default value :false"
::= { ipUnnumberedEntry 1 }
ipUnnumberedParentInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the parent interface of the unnumbered interface.
"
::= { ipUnnumberedEntry 2 }
routingProtocol OBJECT IDENTIFIER ::= { networking 9 }
routingProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF RoutingProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Routing protocol instance."
::= { routingProtocol 1 }
routingProtocolEntry OBJECT-TYPE
SYNTAX RoutingProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of routingProtocolTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName }
::= { routingProtocolTable 1 }
RoutingProtocolEntry ::=
SEQUENCE {
routingProtocolRtpType CoriantTypesRtpType,
routingProtocolRtpName OCTET STRING,
routingProtocolDescription OCTET STRING
}
routingProtocolRtpType OBJECT-TYPE
SYNTAX CoriantTypesRtpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the routing protocol instance.
"
::= { routingProtocolEntry 1 }
routingProtocolRtpName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the routing protocol instance.
For system-controlled instances this name is
persistent, i.e., it SHOULD NOT change across
reboots.
"
::= { routingProtocolEntry 2 }
routingProtocolDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual description of the routing protocol instance.
"
::= { routingProtocolEntry 3 }
staticRoute OBJECT IDENTIFIER ::= { networking 10 }
staticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of static routes."
::= { staticRoute 1 }
staticRouteEntry OBJECT-TYPE
SYNTAX StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of staticRouteTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,staticRouteDestinationPrefix }
::= { staticRouteTable 1 }
StaticRouteEntry ::=
SEQUENCE {
staticRouteDestinationPrefix IetfInetTypesIpPrefix,
staticRouteDescription OCTET STRING,
staticRouteAdvertised TruthValue
}
staticRouteDestinationPrefix OBJECT-TYPE
SYNTAX IetfInetTypesIpPrefix (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP destination prefix.
"
::= { staticRouteEntry 1 }
staticRouteDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual description of the static route.
"
::= { staticRouteEntry 2 }
staticRouteAdvertised OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When set to YES, the static route is advertised in the routing
protocol. For OSPF, the static route will be advertised as an
AS external route, if OSPF is configured as an ASBR.
default value :false"
::= { staticRouteEntry 3 }
ospf OBJECT IDENTIFIER ::= { networking 12 }
ospfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "OSPF protocol."
::= { ospf 1 }
ospfEntry OBJECT-TYPE
SYNTAX OspfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ospfTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName }
::= { ospfTable 1 }
OspfEntry ::=
SEQUENCE {
ospfRouterId IetfYangTypesDottedQuad,
ospfDescription OCTET STRING,
ospfAsbr TruthValue,
ospfAdminStatus INTEGER,
ospfOperStatus INTEGER,
ospfAliasName OCTET STRING
}
ospfRouterId OBJECT-TYPE
SYNTAX IetfYangTypesDottedQuad
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Router ID.
"
::= { ospfEntry 1 }
ospfDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual description of the OSPF instance.
"
::= { ospfEntry 2 }
ospfAsbr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Autonomous System Boundary Router.
default value :true"
::= { ospfEntry 3 }
ospfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :down"
::= { ospfEntry 4 }
ospfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { ospfEntry 5 }
ospfAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { ospfEntry 6 }
ospfArea OBJECT IDENTIFIER ::= { networking 13 }
ospfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of ospf area."
::= { ospfArea 1 }
ospfAreaEntry OBJECT-TYPE
SYNTAX OspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ospfAreaTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,ospfAreaId }
::= { ospfAreaTable 1 }
OspfAreaEntry ::=
SEQUENCE {
ospfAreaId IetfYangTypesDottedQuad,
ospfAreaAdminStatus INTEGER,
ospfAreaOperStatus INTEGER,
ospfAreaAliasName OCTET STRING,
ospfAreaType INTEGER
}
ospfAreaId OBJECT-TYPE
SYNTAX IetfYangTypesDottedQuad (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Router Area ID.
"
::= { ospfAreaEntry 1 }
ospfAreaAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { ospfAreaEntry 2 }
ospfAreaOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { ospfAreaEntry 3 }
ospfAreaAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { ospfAreaEntry 4 }
ospfAreaType OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
stub (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Router Area Type.
default value :normal"
::= { ospfAreaEntry 5 }
ospfInterface OBJECT IDENTIFIER ::= { networking 14 }
ospfInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of interface in an ospf area."
::= { ospfInterface 1 }
ospfInterfaceEntry OBJECT-TYPE
SYNTAX OspfInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ospfInterfaceTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,ospfAreaId,ospfInterfaceOspfIfName }
::= { ospfInterfaceTable 1 }
OspfInterfaceEntry ::=
SEQUENCE {
ospfInterfaceOspfIfName OCTET STRING,
ospfInterfaceOspfLinkpf OCTET STRING,
ospfInterfaceOspfCost Unsigned32,
ospfInterfaceOspfIfRouting INTEGER,
ospfInterfaceOspfNetworkType INTEGER,
ospfInterfaceDrPriority Unsigned32
}
ospfInterfaceOspfIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the interface in OSPF area.
"
::= { ospfInterfaceEntry 1 }
ospfInterfaceOspfLinkpf OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the ospf link profile associated with the interface.
"
::= { ospfInterfaceEntry 2 }
ospfInterfaceOspfCost OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF link cost.
"
::= { ospfInterfaceEntry 3 }
ospfInterfaceOspfIfRouting OBJECT-TYPE
SYNTAX INTEGER {
active (1),
passive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies if Routing is enabled and if so, if Routing is passive or active.
ACTIVE - This link is advertised and routing messages are transported over this link.
PASSIVE - This link is advertised, routing messages are not transported over this link.
default value :active"
::= { ospfInterfaceEntry 4 }
ospfInterfaceOspfNetworkType OBJECT-TYPE
SYNTAX INTEGER {
broadcast (1),
pointToPoint (2),
pointToMultipoint (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Interface Network Types.
"
::= { ospfInterfaceEntry 5 }
ospfInterfaceDrPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local system's priority to become the designated router
default value :1"
::= { ospfInterfaceEntry 6 }
ospfAdjacency OBJECT IDENTIFIER ::= { networking 15 }
ospfAdjacencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAdjacencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "attributes of OSPF adjacency."
::= { ospfAdjacency 1 }
ospfAdjacencyEntry OBJECT-TYPE
SYNTAX OspfAdjacencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ospfAdjacencyTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,ospfAreaId,ospfInterfaceOspfIfName,ospfAdjacencyOspfNeighborAddress }
::= { ospfAdjacencyTable 1 }
OspfAdjacencyEntry ::=
SEQUENCE {
ospfAdjacencyOspfNeighborAddress IetfInetTypesIpv4Address,
ospfAdjacencyNeighborRouterId IetfYangTypesDottedQuad,
ospfAdjacencyOspfAdjStatus INTEGER
}
ospfAdjacencyOspfNeighborAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Address (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "neighbor IP address of the OSPF adjacency.
"
::= { ospfAdjacencyEntry 1 }
ospfAdjacencyNeighborRouterId OBJECT-TYPE
SYNTAX IetfYangTypesDottedQuad
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF neighbor Router ID.
"
::= { ospfAdjacencyEntry 2 }
ospfAdjacencyOspfAdjStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
init (2),
attempt (3),
twoWay (4),
exstart (5),
exchange (6),
loading (7),
full (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF adjacency status.
"
::= { ospfAdjacencyEntry 3 }
rib OBJECT IDENTIFIER ::= { networking 16 }
ribTable OBJECT-TYPE
SYNTAX SEQUENCE OF RibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry represents a RIB identified by the 'name'
key. All routes in a RIB MUST belong to the same address
family.
For each routing instance, an implementation SHOULD
provide one system-controlled default RIB for each
supported address family."
::= { rib 1 }
ribEntry OBJECT-TYPE
SYNTAX RibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ribTable"
INDEX { ribName }
::= { ribTable 1 }
RibEntry ::=
SEQUENCE {
ribName OCTET STRING,
ribAddressFamily INTEGER,
ribDefaultRib TruthValue,
ribDescription OCTET STRING
}
ribName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the RIB.
"
::= { ribEntry 1 }
ribAddressFamily OBJECT-TYPE
SYNTAX INTEGER {
ipv4 (1),
ipv4Unicast (2),
ipv6 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address family.
"
::= { ribEntry 2 }
ribDefaultRib OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This flag has the value of 'true' if and only if the
RIB is the default RIB for the given address family.
A default RIB always receives direct routes. By
default it also receives routes from all routing
protocols.
default value :true"
::= { ribEntry 3 }
ribDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual description of the RIB.
"
::= { ribEntry 4 }
route OBJECT IDENTIFIER ::= { networking 17 }
routeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of static routes."
::= { route 1 }
routeEntry OBJECT-TYPE
SYNTAX RouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of routeTable"
INDEX { ribName,routeSourceProtocol,routeDestinationPrefix }
::= { routeTable 1 }
RouteEntry ::=
SEQUENCE {
routeSourceProtocol CoriantTypesSourceProtocol,
routeDestinationPrefix IetfInetTypesIpPrefix,
routeDescription OCTET STRING,
routePreference Unsigned32,
routeActive TruthValue
}
routeSourceProtocol OBJECT-TYPE
SYNTAX CoriantTypesSourceProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of the routing protocol from which the route originated.
"
::= { routeEntry 1 }
routeDestinationPrefix OBJECT-TYPE
SYNTAX IetfInetTypesIpPrefix (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP destination prefix.
"
::= { routeEntry 2 }
routeDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Textual description of the route.
"
::= { routeEntry 3 }
routePreference OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This route attribute, also known as administrative
distance, allows for selecting the preferred route
among routes with the same destination prefix. A
smaller value means a more preferred route.
"
::= { routeEntry 4 }
routeActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix.
"
::= { routeEntry 5 }
profiles OBJECT IDENTIFIER ::= { networking 18 }
pppProfile OBJECT IDENTIFIER ::= { profiles 1 }
pppProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF PppProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile for the point-to-point interface."
::= { pppProfile 1 }
pppProfileEntry OBJECT-TYPE
SYNTAX PppProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pppProfileTable"
INDEX { pppProfilePppPfName }
::= { pppProfileTable 1 }
PppProfileEntry ::=
SEQUENCE {
pppProfilePppPfName OCTET STRING,
pppProfilePppFcsLength INTEGER,
pppProfilePppMru Unsigned32,
pppProfilePppRestartTimer Unsigned32,
pppProfilePppMaxFailure Unsigned32
}
pppProfilePppPfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the point-to-point protocol profile.
"
::= { pppProfileEntry 1 }
pppProfilePppFcsLength OBJECT-TYPE
SYNTAX INTEGER {
t16 (16),
t32 (32)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies whether the frame check sequence is a 16-bit or 32-bit value.
default value :16"
::= { pppProfileEntry 2 }
pppProfilePppMru OBJECT-TYPE
SYNTAX Unsigned32 (64..1500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum number of octets in the Information and Padding fields.
UNITS:octets
default value :1500"
::= { pppProfileEntry 3 }
pppProfilePppRestartTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the restart timer of the PPP protocol in seconds.
UNITS:seconds
default value :3"
::= { pppProfileEntry 4 }
pppProfilePppMaxFailure OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum failure value of the PPP protocol profile.
default value :5"
::= { pppProfileEntry 5 }
ospfLinkProfile OBJECT IDENTIFIER ::= { profiles 2 }
ospfLinkProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfLinkProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile for the OSPF protocol link."
::= { ospfLinkProfile 1 }
ospfLinkProfileEntry OBJECT-TYPE
SYNTAX OspfLinkProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ospfLinkProfileTable"
INDEX { ospfLinkProfileOspfLinkpfName }
::= { ospfLinkProfileTable 1 }
OspfLinkProfileEntry ::=
SEQUENCE {
ospfLinkProfileOspfLinkpfName OCTET STRING,
ospfLinkProfileHelloInterval Unsigned32,
ospfLinkProfileRouterDeadInterval Unsigned32,
ospfLinkProfileRetransmissionInterval Unsigned32
}
ospfLinkProfileOspfLinkpfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the OSPF protocol link profile.
"
::= { ospfLinkProfileEntry 1 }
ospfLinkProfileHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Hello Interval in seconds.
UNITS:seconds
default value :10"
::= { ospfLinkProfileEntry 2 }
ospfLinkProfileRouterDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 (4..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Router Dead Interval in seconds.
UNITS:seconds
default value :40"
::= { ospfLinkProfileEntry 3 }
ospfLinkProfileRetransmissionInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Retransmission Interval in seconds.
UNITS:seconds
default value :5"
::= { ospfLinkProfileEntry 4 }
oscx OBJECT IDENTIFIER ::= { networking 19 }
oscxTable OBJECT-TYPE
SYNTAX SEQUENCE OF OscxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "OSCX (Optical Supervisory Channel Extended) interface"
::= { oscx 1 }
oscxEntry OBJECT-TYPE
SYNTAX OscxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oscxTable"
INDEX { interfaceIfName }
::= { oscxTable 1 }
OscxEntry ::=
SEQUENCE {
oscxChannel INTEGER,
oscxResourceRef RowPointer,
oscxAliasName OCTET STRING
}
oscxChannel OBJECT-TYPE
SYNTAX INTEGER {
t1 (1),
t2 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the OSCX channel within the Optical Supervisory Channel.
"
::= { oscxEntry 1 }
oscxResourceRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the lower layer resource associated with this interface.
"
::= { oscxEntry 2 }
oscxAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { oscxEntry 3 }
ipv6 OBJECT IDENTIFIER ::= { networking 20 }
ipv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Parameters for the IPv6 address family."
::= { ipv6 1 }
ipv6Entry OBJECT-TYPE
SYNTAX Ipv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipv6Table"
INDEX { interfaceIfName }
::= { ipv6Table 1 }
Ipv6Entry ::=
SEQUENCE {
ipv6Enabled TruthValue,
ipv6Forwarding TruthValue,
ipv6Mtu Unsigned32,
ipv6AddressAssignmentMethod INTEGER
}
ipv6Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Controls whether IPv6 is enabled or disabled on this
interface. When IPv6 is enabled, this interface is
connected to an IPv6 stack, and the interface can send
and receive IPv6 packets.
default value :false"
::= { ipv6Entry 1 }
ipv6Forwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Controls IPv6 packet forwarding of datagrams received by,
but not addressed to, this interface. IPv6 routers
forward datagrams. IPv6 hosts do not (except those
source-routed via the host).
default value :false"
::= { ipv6Entry 2 }
ipv6Mtu OBJECT-TYPE
SYNTAX Unsigned32 (1280..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size, in octets, of the largest IPv6 packet that the
interface will send and receive.
The server may restrict the allowed values for this leaf,
depending on the interface's type.
If this leaf is not configured, the operationally used MTU
depends on the interface's type.
UNITS:octets
default value :1500"
::= { ipv6Entry 3 }
ipv6AddressAssignmentMethod OBJECT-TYPE
SYNTAX INTEGER {
static (1),
autoconfig (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 address assignment method.
default value :autoconfig"
::= { ipv6Entry 4 }
ipv6Address OBJECT IDENTIFIER ::= { networking 21 }
ipv6AddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address on the interface.
index=1 ipv6 address,
index=2 ipv6 link-local address, read-only"
::= { ipv6Address 1 }
ipv6AddressEntry OBJECT-TYPE
SYNTAX Ipv6AddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipv6AddressTable"
INDEX { interfaceIfName,ipv6AddressIndex }
::= { ipv6AddressTable 1 }
Ipv6AddressEntry ::=
SEQUENCE {
ipv6AddressIndex Unsigned32,
ipv6AddressIp IetfInetTypesIpv6AddressNoZone,
ipv6AddressOrigin INTEGER,
ipv6AddressPrefixLength Unsigned32
}
ipv6AddressIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "an uint16 index.
"
::= { ipv6AddressEntry 1 }
ipv6AddressIp OBJECT-TYPE
SYNTAX IetfInetTypesIpv6AddressNoZone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address on the interface.
"
::= { ipv6AddressEntry 2 }
ipv6AddressOrigin OBJECT-TYPE
SYNTAX INTEGER {
other (1),
static (2),
dhcp (3),
linkLayer (4),
random (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The origin of this address.
default value :static"
::= { ipv6AddressEntry 3 }
ipv6AddressPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The length of the subnet prefix.
"
::= { ipv6AddressEntry 4 }
staticRouteNextHop OBJECT IDENTIFIER ::= { networking 22 }
staticRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of static next-hop."
::= { staticRouteNextHop 1 }
staticRouteNextHopEntry OBJECT-TYPE
SYNTAX StaticRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of staticRouteNextHopTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,staticRouteDestinationPrefix,staticRouteNextHopEntryIndex }
::= { staticRouteNextHopTable 1 }
StaticRouteNextHopEntry ::=
SEQUENCE {
staticRouteNextHopEntryIndex OCTET STRING,
staticRouteNextHopEntryOutgoingInterface RowPointer,
staticRouteNextHopEntryNextHopAddress IetfInetTypesIpAddress,
staticRouteNextHopEntryMetric Unsigned32
}
staticRouteNextHopEntryIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry.
"
::= { staticRouteNextHopEntry 1 }
staticRouteNextHopEntryOutgoingInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the outgoing interface.
"
::= { staticRouteNextHopEntry 2 }
staticRouteNextHopEntryNextHopAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the next-hop.
"
::= { staticRouteNextHopEntry 3 }
staticRouteNextHopEntryMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "metric of the next-hop.
default value :0"
::= { staticRouteNextHopEntry 4 }
routeNextHop OBJECT IDENTIFIER ::= { networking 23 }
routeNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF RouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of next-hop."
::= { routeNextHop 1 }
routeNextHopEntry OBJECT-TYPE
SYNTAX RouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of routeNextHopTable"
INDEX { ribName,routeSourceProtocol,routeDestinationPrefix }
::= { routeNextHopTable 1 }
RouteNextHopEntry ::=
SEQUENCE {
routeNextHopEntryOutgoingInterface RowPointer,
routeNextHopEntryNextHopAddress IetfInetTypesIpAddress,
routeNextHopEntrySourceAddress IetfInetTypesIpAddress
}
routeNextHopEntryOutgoingInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the outgoing interface.
"
::= { routeNextHopEntry 1 }
routeNextHopEntryNextHopAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv4 address of the next-hop.
"
::= { routeNextHopEntry 2 }
routeNextHopEntrySourceAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "source address of packet out chosen by kernel if the source address has not been chosen by applcation.
"
::= { routeNextHopEntry 3 }
bgp OBJECT IDENTIFIER ::= { networking 24 }
bgpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Top-level configuration for the BGP router"
::= { bgp 1 }
bgpEntry OBJECT-TYPE
SYNTAX BgpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bgpTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName }
::= { bgpTable 1 }
BgpEntry ::=
SEQUENCE {
bgpAdminStatus INTEGER,
bgpOperStatus INTEGER,
bgpAliasName OCTET STRING,
bgpAs IetfInetTypesAsNumber,
bgpRouterId IetfYangTypesDottedQuad
}
bgpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :down"
::= { bgpEntry 1 }
bgpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :up"
::= { bgpEntry 2 }
bgpAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined alias for this entity. Must be an alphanumeric string with dash or underscore
"
::= { bgpEntry 3 }
bgpAs OBJECT-TYPE
SYNTAX IetfInetTypesAsNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local autonomous system number of the router. Uses
the 32-bit as-number type from the model in RFC 6991.
"
::= { bgpEntry 4 }
bgpRouterId OBJECT-TYPE
SYNTAX IetfYangTypesDottedQuad
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Router id of the router - an unsigned 32-bit integer
expressed in dotted quad notation.
"
::= { bgpEntry 5 }
bgpNeighborTimers OBJECT IDENTIFIER ::= { bgp 2 }
bgpNeighborTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNeighborTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Timers related to a BGP neighbor"
::= { bgpNeighborTimers 1 }
bgpNeighborTimersEntry OBJECT-TYPE
SYNTAX BgpNeighborTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bgpNeighborTimersTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,bgpNeighborNeighborAddress }
::= { bgpNeighborTimersTable 1 }
BgpNeighborTimersEntry ::=
SEQUENCE {
bgpNeighborTimersConnectRetry OCTET STRING,
bgpNeighborTimersHoldTime OCTET STRING,
bgpNeighborTimersKeepaliveInterval OCTET STRING,
bgpNeighborTimersMinimumAdvertisementInterval OCTET STRING,
bgpNeighborTimersNegotiatedHoldTime OCTET STRING
}
bgpNeighborTimersConnectRetry OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time interval in seconds between attempts to establish a
session with the peer.
UNITS:seconds
default value :30"
::= { bgpNeighborTimersEntry 1 }
bgpNeighborTimersHoldTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time interval in seconds that a BGP session will be
considered active in the absence of keepalive or other
messages from the peer. The hold-time is typically set to
3x the keepalive-interval.
UNITS:seconds
default value :90"
::= { bgpNeighborTimersEntry 2 }
bgpNeighborTimersKeepaliveInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time interval in seconds between transmission of keepalive
messages to the neighbor. Typically set to 1/3 the
hold-time.
UNITS:seconds
default value :30"
::= { bgpNeighborTimersEntry 3 }
bgpNeighborTimersMinimumAdvertisementInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum time which must elapse between subsequent UPDATE
messages relating to a common set of NLRI being transmitted
to a peer. This timer is referred to as
MinRouteAdvertisementIntervalTimer by RFC 4721 and serves to
reduce the number of UPDATE messages transmitted when a
particular set of NLRI exhibit instability.
UNITS:seconds
default value :30"
::= { bgpNeighborTimersEntry 4 }
bgpNeighborTimersNegotiatedHoldTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The negotiated hold-time for the BGP session
UNITS:seconds
"
::= { bgpNeighborTimersEntry 5 }
bgpNeighborTransport OBJECT IDENTIFIER ::= { bgp 3 }
bgpNeighborTransportTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNeighborTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Transport session parameters for the BGP neighbor"
::= { bgpNeighborTransport 1 }
bgpNeighborTransportEntry OBJECT-TYPE
SYNTAX BgpNeighborTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bgpNeighborTransportTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,bgpNeighborNeighborAddress }
::= { bgpNeighborTransportTable 1 }
BgpNeighborTransportEntry ::=
SEQUENCE {
bgpNeighborTransportLocalAddress IetfInetTypesIpAddress,
bgpNeighborTransportLocalPort IetfInetTypesPortNumber,
bgpNeighborTransportRemoteAddress IetfInetTypesIpAddress,
bgpNeighborTransportRemotePort IetfInetTypesPortNumber
}
bgpNeighborTransportLocalAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set the local IP (either IPv4 or IPv6) address to use for
the session when sending BGP update messages. This may be
expressed as either an IP address or reference to the name
of an interface.
"
::= { bgpNeighborTransportEntry 1 }
bgpNeighborTransportLocalPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local TCP port being used for the TCP session supporting
the BGP session
"
::= { bgpNeighborTransportEntry 2 }
bgpNeighborTransportRemoteAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote address to which the BGP session has been
established
"
::= { bgpNeighborTransportEntry 3 }
bgpNeighborTransportRemotePort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote port being used by the peer for the TCP session
supporting the BGP session
"
::= { bgpNeighborTransportEntry 4 }
bgpNeighbor OBJECT IDENTIFIER ::= { networking 25 }
bgpNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of BGP neighbors configured on the local system,
uniquely identified by peer IPv[46] address"
::= { bgpNeighbor 1 }
bgpNeighborEntry OBJECT-TYPE
SYNTAX BgpNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bgpNeighborTable"
INDEX { routingProtocolRtpType,routingProtocolRtpName,bgpNeighborNeighborAddress }
::= { bgpNeighborTable 1 }
BgpNeighborEntry ::=
SEQUENCE {
bgpNeighborNeighborAddress IetfInetTypesIpAddress,
bgpNeighborEnabled TruthValue,
bgpNeighborPeerAs IetfInetTypesAsNumber,
bgpNeighborDescription OCTET STRING,
bgpNeighborSessionState INTEGER,
bgpNeighborEstablishedTransitions IetfYangTypesCounter64,
bgpNeighborSupportedCapabilities OCTET STRING
}
bgpNeighborNeighborAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address of the BGP peer, either in IPv4 or IPv6
"
::= { bgpNeighborEntry 1 }
bgpNeighborEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether the BGP peer is enabled. In cases where the enabled
leaf is set to false, the local system should not initiate
connections to the neighbor, and should not respond to TCP
connections attempts from the neighbor. If the state of the
BGP session is ESTABLISHED at the time that this leaf is set
to false, the BGP session should be ceased.
default value :true"
::= { bgpNeighborEntry 2 }
bgpNeighborPeerAs OBJECT-TYPE
SYNTAX IetfInetTypesAsNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AS number of the peer.
"
::= { bgpNeighborEntry 3 }
bgpNeighborDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An optional textual description (intended primarily for use
with a peer or group
"
::= { bgpNeighborEntry 4 }
bgpNeighborSessionState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
connect (2),
active (3),
opensent (4),
openconfirm (5),
established (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operational state of the BGP peer
default value :IDLE"
::= { bgpNeighborEntry 5 }
bgpNeighborEstablishedTransitions OBJECT-TYPE
SYNTAX IetfYangTypesCounter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of transitions to the Established state for the
neighbor session. This value is analogous to the
bgpPeerFsmEstablishedTransitions object from the standard
BGP-4 MIB
"
::= { bgpNeighborEntry 6 }
bgpNeighborSupportedCapabilities OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "BGP capabilities negotiated as supported with the peerThis is a leaf list, encode by some leafs.
"
::= { bgpNeighborEntry 7 }
hmoRoute OBJECT IDENTIFIER ::= { networking 26 }
hmoRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of routes from static/ospfv2/bgp."
::= { hmoRoute 1 }
hmoRouteEntry OBJECT-TYPE
SYNTAX HmoRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoRouteTable"
INDEX { ribName,hmoRouteSourceProtocol,hmoRouteDestinationPrefix }
::= { hmoRouteTable 1 }
HmoRouteEntry ::=
SEQUENCE {
hmoRouteSourceProtocol CoriantTypesSourceProtocol,
hmoRouteDestinationPrefix IetfInetTypesIpPrefix
}
hmoRouteSourceProtocol OBJECT-TYPE
SYNTAX CoriantTypesSourceProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of the routing protocol from which the route originated.
"
::= { hmoRouteEntry 1 }
hmoRouteDestinationPrefix OBJECT-TYPE
SYNTAX IetfInetTypesIpPrefix (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP destination prefix.
"
::= { hmoRouteEntry 2 }
hmoRouteNextHop OBJECT IDENTIFIER ::= { networking 27 }
hmoRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of next-hop."
::= { hmoRouteNextHop 1 }
hmoRouteNextHopEntry OBJECT-TYPE
SYNTAX HmoRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoRouteNextHopTable"
INDEX { ribName,hmoRouteSourceProtocol,hmoRouteDestinationPrefix }
::= { hmoRouteNextHopTable 1 }
HmoRouteNextHopEntry ::=
SEQUENCE {
hmoRouteNextHopEntryOutgoingInterface RowPointer,
hmoRouteNextHopEntryNextHopAddress IetfInetTypesIpAddress,
hmoRouteNextHopEntrySourceAddress IetfInetTypesIpAddress
}
hmoRouteNextHopEntryOutgoingInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference of the outgoing interface.
"
::= { hmoRouteNextHopEntry 1 }
hmoRouteNextHopEntryNextHopAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv4 address of the next-hop.
"
::= { hmoRouteNextHopEntry 2 }
hmoRouteNextHopEntrySourceAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "source address of packet out chosen by kernel if the source address has not been chosen by applcation.
"
::= { hmoRouteNextHopEntry 3 }
neighbors OBJECT IDENTIFIER ::= { networking 28 }
neighborsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NeighborsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { neighbors 1 }
neighborsEntry OBJECT-TYPE
SYNTAX NeighborsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of neighborsTable"
INDEX { neighborsAddressFamily }
::= { neighborsTable 1 }
NeighborsEntry ::=
SEQUENCE {
neighborsAddressFamily OCTET STRING
}
neighborsAddressFamily OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The address-family of the neighbor.
"
::= { neighborsEntry 1 }
neighbor OBJECT IDENTIFIER ::= { networking 29 }
neighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of mappings from IP addresses to link-layer addresses."
::= { neighbor 1 }
neighborEntry OBJECT-TYPE
SYNTAX NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of neighborTable"
INDEX { neighborsAddressFamily,neighborIp }
::= { neighborTable 1 }
NeighborEntry ::=
SEQUENCE {
neighborIp IetfInetTypesIpAddressNoZone,
neighborLinkLayerAddress IetfYangTypesPhysAddress,
neighborOrigin INTEGER,
neighborOutgoingInterface RowPointer,
neighborVlanDevName OCTET STRING
}
neighborIp OBJECT-TYPE
SYNTAX IetfInetTypesIpAddressNoZone (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of the neighbor node.
"
::= { neighborEntry 1 }
neighborLinkLayerAddress OBJECT-TYPE
SYNTAX IetfYangTypesPhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The link-layer address of the neighbor node.
"
::= { neighborEntry 2 }
neighborOrigin OBJECT-TYPE
SYNTAX INTEGER {
other (0),
static (1),
dynamic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The origin of this neighbor entry.
"
::= { neighborEntry 3 }
neighborOutgoingInterface OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface to the neighbor node.
"
::= { neighborEntry 4 }
neighborVlanDevName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN device name.
"
::= { neighborEntry 5 }
padENTR OBJECT IDENTIFIER ::= { networking 32 }
padENTRTable OBJECT-TYPE
SYNTAX SEQUENCE OF PadENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Peer Authorization Database (PAD) entry."
::= { padENTR 1 }
padENTREntry OBJECT-TYPE
SYNTAX PadENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of padENTRTable"
INDEX { padENTRName }
::= { padENTRTable 1 }
PadENTREntry ::=
SEQUENCE {
padENTRName OCTET STRING
}
padENTRName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PAD unique name to identify this
entry.
"
::= { padENTREntry 1 }
peerAuthentication OBJECT IDENTIFIER ::= { networking 33 }
peerAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PeerAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This container allows the Security
Controller to configure the
authentication method (pre-shared key,
eap, digitial-signature, null) that
will use a particular peer and the
credentials, which will depend on the
selected authentication method."
::= { peerAuthentication 1 }
peerAuthenticationEntry OBJECT-TYPE
SYNTAX PeerAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of peerAuthenticationTable"
INDEX { padENTRName }
::= { peerAuthenticationTable 1 }
PeerAuthenticationEntry ::=
SEQUENCE {
peerAuthenticationAuthMethod INTEGER
}
peerAuthenticationAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
preShared (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of authentication method.
default value :pre-shared"
::= { peerAuthenticationEntry 1 }
preShared OBJECT IDENTIFIER ::= { networking 34 }
preSharedTable OBJECT-TYPE
SYNTAX SEQUENCE OF PreSharedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Shared secret value for PSK."
::= { preShared 1 }
preSharedEntry OBJECT-TYPE
SYNTAX PreSharedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of preSharedTable"
INDEX { padENTRName }
::= { preSharedTable 1 }
PreSharedEntry ::=
SEQUENCE {
preSharedSecret IetfYangTypesHexString
}
preSharedSecret OBJECT-TYPE
SYNTAX IetfYangTypesHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Pre-shared secret value.
"
::= { preSharedEntry 1 }
connENTR OBJECT IDENTIFIER ::= { networking 35 }
connENTRTable OBJECT-TYPE
SYNTAX SEQUENCE OF ConnENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IKE peer connection information. This list
contains the IKE connection for this peer
with other peers. This will be translated in
real time by IKE Security Associations
established with these nodes."
::= { connENTR 1 }
connENTREntry OBJECT-TYPE
SYNTAX ConnENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of connENTRTable"
INDEX { connENTRName }
::= { connENTRTable 1 }
ConnENTREntry ::=
SEQUENCE {
connENTRName OCTET STRING,
connENTRIkeVersion INTEGER,
connENTRAdminStatus INTEGER,
connENTROperStatus INTEGER,
connENTRAuthalg OCTET STRING,
connENTREncalg OCTET STRING,
connENTRDhGroup IpsecDhGroup,
connENTRLocalAddress IetfInetTypesIpAddress,
connENTRLocalPadEntryRef RowPointer,
connENTRRemoteAddress IetfInetTypesIpAddress,
connENTRRemotePadEntryRef RowPointer
}
connENTRName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifier for this connection
entry.
"
::= { connENTREntry 1 }
connENTRIkeVersion OBJECT-TYPE
SYNTAX INTEGER {
ikev2 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE version. Only version 2 is supported
so far.
default value :ikev2"
::= { connENTREntry 2 }
connENTRAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :down"
::= { connENTREntry 3 }
connENTROperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :down"
::= { connENTREntry 4 }
connENTRAuthalg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Authentication algorithm for establishing the IKE SA.This is a leaf list, encode by some leafs.
"
::= { connENTREntry 5 }
connENTREncalg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption algorithm for the IKE SAs.This is a leaf list, encode by some leafs.
"
::= { connENTREntry 6 }
connENTRDhGroup OBJECT-TYPE
SYNTAX IpsecDhGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Group number for Diffie-Hellman Exponentiation used during IKE_SA_INIT for the IKE SA key exchange.
default value :14"
::= { connENTREntry 7 }
connENTRLocalAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "local address.
"
::= { connENTREntry 8 }
connENTRLocalPadEntryRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local peer authentication information.
This node points to a specific entry in
the PAD where the authorization
information about this particular local
peer is stored. It MUST match a
pad-entry-name.
"
::= { connENTREntry 9 }
connENTRRemoteAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "remote address.
"
::= { connENTREntry 10 }
connENTRRemotePadEntryRef OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote peer authentication information.
This node points to a specific entry in
the PAD where the authorization
information about this particular
remote peer is stored. It MUST match a
pad-entry-name.
"
::= { connENTREntry 11 }
ikeSaLifetime OBJECT IDENTIFIER ::= { networking 36 }
ikeSaLifetimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IkeSaLifetimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IKE SA lifetime soft. Two lifetime values
can be configured: either rekey time of the
IKE SA or reauth time of the IKE SA. When
the rekey lifetime expires a rekey of the
IKE SA starts. When reauth lifetime
expires a IKE SA reauthentication starts."
::= { ikeSaLifetime 1 }
ikeSaLifetimeEntry OBJECT-TYPE
SYNTAX IkeSaLifetimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ikeSaLifetimeTable"
INDEX { connENTRName }
::= { ikeSaLifetimeTable 1 }
IkeSaLifetimeEntry ::=
SEQUENCE {
ikeSaLifetimeRekeyTime Unsigned32,
ikeSaLifetimeReauthTime Unsigned32
}
ikeSaLifetimeRekeyTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in seconds between each IKE SA
rekey.The value 0 means infinite.
default value :86400"
::= { ikeSaLifetimeEntry 1 }
ikeSaLifetimeReauthTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in seconds between each IKE SA
reauthentication. The value 0 means
infinite.
default value :86400"
::= { ikeSaLifetimeEntry 2 }
spdENTR OBJECT IDENTIFIER ::= { networking 40 }
spdENTRTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpdENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of entries which will constitute
the representation of the SPD. Since we
have IKE in this case, it is only
required to send a IPsec policy from
this NE where 'local' is this NE and
'remote' the other NE. The IKE
implementation will install IPsec
policies in the NE in both
directions (inbound and outbound) and
their corresponding IPsec SAs based on
the information in this SPD entry."
::= { spdENTR 1 }
spdENTREntry OBJECT-TYPE
SYNTAX SpdENTREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of spdENTRTable"
INDEX { connENTRName,spdENTRSpdEntryName }
::= { spdENTRTable 1 }
SpdENTREntry ::=
SEQUENCE {
spdENTRAdminStatus INTEGER,
spdENTROperStatus INTEGER,
spdENTRSpdEntryName OCTET STRING
}
spdENTRAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :down"
::= { spdENTREntry 3 }
spdENTROperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism for the operator to decide whether a resource is operational or not, therefore this parameter has a read-only nature.
The operational state is closely coupled with the alarm status of a resource, i.e. state transitions are triggered internally by the NE software. It can have one of the following values:
Down: The resource is totally inoperable and unable to provide service to the user(s)
Up: The resource is partially or fully operable and available for use.
default value :down"
::= { spdENTREntry 4 }
spdENTRSpdEntryName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SPD entry unique name to identify
the IPsec policy.
"
::= { spdENTREntry 5 }
trafficSelector OBJECT IDENTIFIER ::= { networking 42 }
trafficSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packets are selected for
processing actions based on the IP and inner
protocol header information, selectors,
matched against entries in the SPD."
::= { trafficSelector 1 }
trafficSelectorEntry OBJECT-TYPE
SYNTAX TrafficSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of trafficSelectorTable"
INDEX { connENTRName,spdENTRSpdEntryName }
::= { trafficSelectorTable 1 }
TrafficSelectorEntry ::=
SEQUENCE {
trafficSelectorLocalSubnet IetfInetTypesIpPrefix,
trafficSelectorRemoteSubnet IetfInetTypesIpPrefix,
trafficSelectorInnerProtocol IpsecIpsecInnerProtocol
}
trafficSelectorLocalSubnet OBJECT-TYPE
SYNTAX IetfInetTypesIpPrefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local IP address subnet.
"
::= { trafficSelectorEntry 1 }
trafficSelectorRemoteSubnet OBJECT-TYPE
SYNTAX IetfInetTypesIpPrefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote IP address subnet.
"
::= { trafficSelectorEntry 2 }
trafficSelectorInnerProtocol OBJECT-TYPE
SYNTAX IpsecIpsecInnerProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inner Protocol that is going to be
protected with IPsec.
default value :any"
::= { trafficSelectorEntry 3 }
localPorts OBJECT IDENTIFIER ::= { networking 43 }
localPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of local ports. When the inner
protocol is ICMP this 16 bit value represents
code and type."
::= { localPorts 1 }
localPortsEntry OBJECT-TYPE
SYNTAX LocalPortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of localPortsTable"
INDEX { connENTRName,spdENTRSpdEntryName,localPortsStart,localPortsEnd }
::= { localPortsTable 1 }
LocalPortsEntry ::=
SEQUENCE {
localPortsStart IetfInetTypesPortNumber,
localPortsEnd IetfInetTypesPortNumber
}
localPortsStart OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Start port number.
"
::= { localPortsEntry 1 }
localPortsEnd OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End port number.
"
::= { localPortsEntry 2 }
remotePorts OBJECT IDENTIFIER ::= { networking 44 }
remotePortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemotePortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of remote ports. When the upper layer
protocol is ICMP this 16 bit value represents
code and type."
::= { remotePorts 1 }
remotePortsEntry OBJECT-TYPE
SYNTAX RemotePortsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of remotePortsTable"
INDEX { connENTRName,spdENTRSpdEntryName,remotePortsStart,remotePortsEnd }
::= { remotePortsTable 1 }
RemotePortsEntry ::=
SEQUENCE {
remotePortsStart IetfInetTypesPortNumber,
remotePortsEnd IetfInetTypesPortNumber
}
remotePortsStart OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Start port number.
"
::= { remotePortsEntry 1 }
remotePortsEnd OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "End port number.
"
::= { remotePortsEntry 2 }
processingInfo OBJECT IDENTIFIER ::= { networking 45 }
processingInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProcessingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SPD processing. If the required processing
action is protect, it contains the required
information to process the packet."
::= { processingInfo 1 }
processingInfoEntry OBJECT-TYPE
SYNTAX ProcessingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of processingInfoTable"
INDEX { connENTRName,spdENTRSpdEntryName }
::= { processingInfoTable 1 }
ProcessingInfoEntry ::=
SEQUENCE {
processingInfoAction INTEGER
}
processingInfoAction OBJECT-TYPE
SYNTAX INTEGER {
protect (0),
bypass (1),
discard (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If bypass or discard, container ipsec-sa-cfg is empty.
default value :protect"
::= { processingInfoEntry 1 }
ipsecSaCfg OBJECT IDENTIFIER ::= { networking 46 }
ipsecSaCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecSaCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPsec SA configuration included in the SPD
entry."
::= { ipsecSaCfg 1 }
ipsecSaCfgEntry OBJECT-TYPE
SYNTAX IpsecSaCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ipsecSaCfgTable"
INDEX { connENTRName,spdENTRSpdEntryName }
::= { ipsecSaCfgTable 1 }
IpsecSaCfgEntry ::=
SEQUENCE {
ipsecSaCfgMode INTEGER,
ipsecSaCfgProtocolParameters INTEGER
}
ipsecSaCfgMode OBJECT-TYPE
SYNTAX INTEGER {
transport (0),
tunnel (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPsec SA has to be processed in
transport or tunnel mode.
default value :transport"
::= { ipsecSaCfgEntry 1 }
ipsecSaCfgProtocolParameters OBJECT-TYPE
SYNTAX INTEGER {
esp (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Security protocol of the IPsec SA:
Only ESP is supported but it could be
extended in the future.
default value :esp"
::= { ipsecSaCfgEntry 2 }
espAlgorithms OBJECT IDENTIFIER ::= { networking 47 }
espAlgorithmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF EspAlgorithmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configuration of Encapsulating
Security Payload (ESP) parameters and
algorithms."
::= { espAlgorithms 1 }
espAlgorithmsEntry OBJECT-TYPE
SYNTAX EspAlgorithmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of espAlgorithmsTable"
INDEX { connENTRName,spdENTRSpdEntryName }
::= { espAlgorithmsTable 1 }
EspAlgorithmsEntry ::=
SEQUENCE {
espAlgorithmsIntegrity OCTET STRING,
espAlgorithmsEncryption OCTET STRING
}
espAlgorithmsIntegrity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configuration of ESP authentication
based on the specified integrity
algorithm. With AEAD algorithms,
the integrity node is not
used.This is a leaf list, encode by some leafs.
"
::= { espAlgorithmsEntry 1 }
espAlgorithmsEncryption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configuration of ESP encryption algorithms.This is a leaf list, encode by some leafs.
"
::= { espAlgorithmsEntry 2 }
childSaInfo OBJECT IDENTIFIER ::= { networking 48 }
childSaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChildSaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specific information for IPsec SAs
SAs. It includes PFS group and IPsec SAs
rekey lifetimes."
::= { childSaInfo 1 }
childSaInfoEntry OBJECT-TYPE
SYNTAX ChildSaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of childSaInfoTable"
INDEX { connENTRName }
::= { childSaInfoTable 1 }
ChildSaInfoEntry ::=
SEQUENCE {
childSaInfoPfsGroups OCTET STRING
}
childSaInfoPfsGroups OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "perfect forward secrecy group numbers.This is a leaf list, encode by some leafs.
"
::= { childSaInfoEntry 1 }
childSaLifetime OBJECT IDENTIFIER ::= { networking 49 }
childSaLifetimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChildSaLifetimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPsec SA lifetime soft."
::= { childSaLifetime 1 }
childSaLifetimeEntry OBJECT-TYPE
SYNTAX ChildSaLifetimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of childSaLifetimeTable"
INDEX { connENTRName }
::= { childSaLifetimeTable 1 }
ChildSaLifetimeEntry ::=
SEQUENCE {
childSaLifetimeTime Unsigned32,
childSaLifetimeBytes Unsigned32
}
childSaLifetimeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in seconds since the IPsec SA was added.
For example, if this value is 180 seconds it
means the IPsec SA expires in 180 seconds since
it was added. The value 0 implies infinite.
default value :28800"
::= { childSaLifetimeEntry 1 }
childSaLifetimeBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the IPsec SA processes the number of bytes
expressed in this leaf, the IPsec SA expires and
should be rekeyed. The value 0 implies
infinite.
default value :0"
::= { childSaLifetimeEntry 2 }
ikeState OBJECT IDENTIFIER ::= { networking 51 }
ikeStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF IkeStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IKE state data for a particular
connection."
::= { ikeState 1 }
ikeStateEntry OBJECT-TYPE
SYNTAX IkeStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ikeStateTable"
INDEX { connENTRName }
::= { ikeStateTable 1 }
IkeStateEntry ::=
SEQUENCE {
ikeStateInitiator TruthValue,
ikeStateInitiatorIkesaSpi OCTET STRING,
ikeStateResponderIkesaSpi OCTET STRING,
ikeStateEstablished OCTET STRING,
ikeStateCurrentRekeyTime OCTET STRING,
ikeStateCurrentReauthTime OCTET STRING
}
ikeStateInitiator OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is acting as initiator for this
connection.
"
::= { ikeStateEntry 1 }
ikeStateInitiatorIkesaSpi OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Initiator's IKE SA SPI.
"
::= { ikeStateEntry 2 }
ikeStateResponderIkesaSpi OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Responder's IKE SA SPI.
"
::= { ikeStateEntry 3 }
ikeStateEstablished OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Seconds since this IKE SA has been
established.
"
::= { ikeStateEntry 4 }
ikeStateCurrentRekeyTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Seconds before IKE SA must be rekeyed.
"
::= { ikeStateEntry 5 }
ikeStateCurrentReauthTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Seconds before IKE SA must be
re-authenticated.
"
::= { ikeStateEntry 6 }
acl OBJECT IDENTIFIER ::= { networking 52 }
aclTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An ACL is an ordered list of ACEs. Each ACE has a
list of match criteria and a list of actions."
::= { acl 1 }
aclEntry OBJECT-TYPE
SYNTAX AclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclTable"
INDEX { aclName }
::= { aclTable 1 }
AclEntry ::=
SEQUENCE {
aclName OCTET STRING,
aclType INTEGER
}
aclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the access list.
"
::= { aclEntry 1 }
aclType OBJECT-TYPE
SYNTAX INTEGER {
ipv4AclType (0),
ipv6AclType (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of ACL. Indicates the primary intended
type of match criteria (e.g., Ethernet, IPv4, IPv6, mixed,
etc.) used in the list instance.
"
::= { aclEntry 2 }
ace OBJECT IDENTIFIER ::= { networking 53 }
aceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of ACEs."
::= { ace 1 }
aceEntry OBJECT-TYPE
SYNTAX AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aceTable"
INDEX { aclName,aceSequenceId }
::= { aceTable 1 }
AceEntry ::=
SEQUENCE {
aceSequenceId Unsigned32,
aceLabel OCTET STRING,
aceForwardingAction INTEGER
}
aceSequenceId OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sequence number that establishes the relative
order of the ACE within an ACL
"
::= { aceEntry 2 }
aceLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique name identifying this ACE.
"
::= { aceEntry 3 }
aceForwardingAction OBJECT-TYPE
SYNTAX INTEGER {
accept (0),
drop (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the forwarding action per ace entry.
"
::= { aceEntry 4 }
aclSet OBJECT IDENTIFIER ::= { networking 58 }
aclSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of ACLs on local service."
::= { aclSet 1 }
aclSetEntry OBJECT-TYPE
SYNTAX AclSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclSetTable"
INDEX { aclLocalServiceService,aclSetName }
::= { aclSetTable 1 }
AclSetEntry ::=
SEQUENCE {
aclSetName OCTET STRING
}
aclSetName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference to the ACL name applied on the local network services.
"
::= { aclSetEntry 1 }
aclIpv4 OBJECT IDENTIFIER ::= { networking 59 }
aclIpv4Table OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Rule set that matches IPv4 headers."
::= { aclIpv4 1 }
aclIpv4Entry OBJECT-TYPE
SYNTAX AclIpv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclIpv4Table"
INDEX { aclName,aceSequenceId }
::= { aclIpv4Table 1 }
AclIpv4Entry ::=
SEQUENCE {
aclIpv4SourceIpv4Network IetfInetTypesIpv4Prefix,
aclIpv4Protocol Unsigned32
}
aclIpv4SourceIpv4Network OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Prefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IPv4 address prefix.
"
::= { aclIpv4Entry 1 }
aclIpv4Protocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Internet Protocol number.
Refers to the protocol of the payload.
"
::= { aclIpv4Entry 2 }
aclIpv6 OBJECT IDENTIFIER ::= { networking 60 }
aclIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Rule set that matches IPv6 headers."
::= { aclIpv6 1 }
aclIpv6Entry OBJECT-TYPE
SYNTAX AclIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclIpv6Table"
INDEX { aclName,aceSequenceId }
::= { aclIpv6Table 1 }
AclIpv6Entry ::=
SEQUENCE {
aclIpv6SourceIpv6Network IetfInetTypesIpv6Prefix,
aclIpv6Protocol Unsigned32
}
aclIpv6SourceIpv6Network OBJECT-TYPE
SYNTAX IetfInetTypesIpv6Prefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IPv6 address prefix.
"
::= { aclIpv6Entry 1 }
aclIpv6Protocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Internet Protocol number. Refers to the protocol of the
payload. In IPv6, this field is known as 'next-header',
and if extension headers are present, the protocol is
present in the 'upper-layer' header.
"
::= { aclIpv6Entry 2 }
aclTcp OBJECT IDENTIFIER ::= { networking 61 }
aclTcpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclTcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Rule set that matches TCP headers."
::= { aclTcp 1 }
aclTcpEntry OBJECT-TYPE
SYNTAX AclTcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclTcpTable"
INDEX { aclName,aceSequenceId }
::= { aclTcpTable 1 }
AclTcpEntry ::=
SEQUENCE {
aclTcpDestinationLowerPort IetfInetTypesPortNumber,
aclTcpDestinationUpperPort IetfInetTypesPortNumber
}
aclTcpDestinationLowerPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lower boundary for a port.
"
::= { aclTcpEntry 1 }
aclTcpDestinationUpperPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Upper boundary for a port.
"
::= { aclTcpEntry 2 }
aclUdp OBJECT IDENTIFIER ::= { networking 62 }
aclUdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclUdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Rule set that matches UDP headers."
::= { aclUdp 1 }
aclUdpEntry OBJECT-TYPE
SYNTAX AclUdpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclUdpTable"
INDEX { aclName,aceSequenceId }
::= { aclUdpTable 1 }
AclUdpEntry ::=
SEQUENCE {
aclUdpDestinationLowerPort IetfInetTypesPortNumber,
aclUdpDestinationUpperPort IetfInetTypesPortNumber
}
aclUdpDestinationLowerPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lower boundary for a port.
"
::= { aclUdpEntry 1 }
aclUdpDestinationUpperPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Upper boundary for a port.
"
::= { aclUdpEntry 2 }
aclLocalService OBJECT IDENTIFIER ::= { networking 63 }
aclLocalServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclLocalServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ACL attachment point of all the local network services."
::= { aclLocalService 1 }
aclLocalServiceEntry OBJECT-TYPE
SYNTAX AclLocalServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aclLocalServiceTable"
INDEX { aclLocalServiceService }
::= { aclLocalServiceTable 1 }
AclLocalServiceEntry ::=
SEQUENCE {
aclLocalServiceService INTEGER
}
aclLocalServiceService OBJECT-TYPE
SYNTAX INTEGER {
all (0),
ssh (1),
cli (2),
snmp (3),
netconf (4),
restconf (5),
webgui (6),
grpc (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { aclLocalServiceEntry 1 }
security OBJECT IDENTIFIER ::= { groove 7 }
securityInfo OBJECT IDENTIFIER ::= { security 1 }
securitySshPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs.
"
::= { securityInfo 1 }
securitySshPublicKeyFingerprint OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The fingerprint of the system's public key.This is a leaf list, encode by some leafs.
"
::= { securityInfo 2 }
securityPreLoginMessage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1440))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Welcome message displayed before user login
default value :****************************************** Warning ******************************************
This system is restricted to authorized users for business purposes. Unauthorized access is a
violation of the law. This service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring.
*********************************************************************************************
"
::= { securityInfo 3 }
securityWarningMessage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1440))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Welcome message displayed after user login
default value :****************************************** Warning ******************************************
This system is restricted to authorized users for business purposes. Unauthorized access is a
violation of the law. This service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring.
*********************************************************************************************
"
::= { securityInfo 4 }
securityAaaAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER {
localOnly (1),
localFirstThenRemote (3),
remoteFirstThenLocal (4),
remoteUnavailableThenLocal (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specify authentication method for the user login to the NE.
default value :local-only"
::= { securityInfo 5 }
securitySystemFips OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specifies whether the system security is operating in compliance with FIPS.
default value :disabled"
::= { securityInfo 6 }
securityHttpSupport OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP
default value :disabled"
::= { securityInfo 7 }
securityStrictPasswordCheck OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines whether system password follow strict checking
default value :enabled"
::= { securityInfo 8 }
securityGrpcLocalCertificate OBJECT-TYPE
SYNTAX SecurityGrpcCertificateRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate for gRPC dial-in server and dial-out client.
default value :none"
::= { securityInfo 9 }
securityHttpsLocalCertificate OBJECT-TYPE
SYNTAX SecurityLocalCertificateRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate for both WebGUI https server and RESTCONF https server.
default value :none"
::= { securityInfo 10 }
securityGrpcDialOutTrustedCertgrp OBJECT-TYPE
SYNTAX SecurityTrustedCertificateGroupRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "trusted certificate group for gRPC dial-out client.
default value :none"
::= { securityInfo 11 }
securityGrpcDialInTrustedCertgrp OBJECT-TYPE
SYNTAX SecurityTrustedCertificateGroupRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "trusted certificate group for gRPC dial-in server.
default value :none"
::= { securityInfo 12 }
securityGrpcDialOutAuthentication OBJECT-TYPE
SYNTAX INTEGER {
none (0),
tlsUniAuth (1),
tlsMutualAuth (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :none"
::= { securityInfo 13 }
securityGrpcDialInAuthentication OBJECT-TYPE
SYNTAX INTEGER {
none (0),
tlsUniAuth (1),
tlsMutualAuth (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
default value :none"
::= { securityInfo 14 }
securityRestconfHttpsTrustedCertgrp OBJECT-TYPE
SYNTAX SecurityTrustedCertificateGroupRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate group for RESTCONF https server.
default value :none"
::= { securityInfo 16 }
securityRestconfHttpsAuthentication OBJECT-TYPE
SYNTAX INTEGER {
tlsUniAuth (0),
tlsMutualAuth (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Update TLS auth for RESTCONF
Conditions:/ne/system/restconf/rest-https-support = 'enabled'
default value :tls-uni-auth"
::= { securityInfo 17 }
securityCspSymmetricalKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Critical Security Parameters symmetrical key.
"
::= { securityInfo 18 }
securitySshSha1Support OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines if ssh-sha1 is enabled for SSH. This applies to sha-1 hash and HMAC.
default value :enabled"
::= { securityInfo 19 }
user OBJECT IDENTIFIER ::= { security 2 }
userTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { user 1 }
userEntry OBJECT-TYPE
SYNTAX UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of userTable"
INDEX { userName }
::= { userTable 1 }
UserEntry ::=
SEQUENCE {
userName CoriantTypesUserName,
userPassword OCTET STRING,
userClass INTEGER,
userMaxInvalidLogin Unsigned32,
userSuspensionTime Unsigned32,
userTimeout Unsigned32,
userPasswordAgingInterval Unsigned32,
userPasswordExpirationDate IetfYangTypesDateAndTime,
userAdminStatus INTEGER,
userStatus INTEGER,
userMaxSessions Unsigned32,
userLastLoginDate IetfYangTypesDateAndTime,
userAaaType INTEGER
}
userName OBJECT-TYPE
SYNTAX CoriantTypesUserName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User name.
"
::= { userEntry 1 }
userPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The password of the user.
"
::= { userEntry 2 }
userClass OBJECT-TYPE
SYNTAX INTEGER {
cryptoOfficer (0),
administration (1),
configuration (2),
operation (3),
supervision (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The access class for the user.
default value :supervision"
::= { userEntry 3 }
userMaxInvalidLogin OBJECT-TYPE
SYNTAX Unsigned32 (0..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute is the maximum number of consecutive and invalid login attempts
before an account is suspended (lockedout).
Conditions:../user-aaa-type = 'local'
default value :3"
::= { userEntry 4 }
userSuspensionTime OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute is the duration of UID suspension following consecutive invalid login attempts.
Setting the value to 0 disables this attribute.
Conditions:../user-aaa-type = 'local'
UNITS:seconds
default value :60"
::= { userEntry 5 }
userTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute is the Session Time Out Interval. If there are no messages between the user
and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables
this attribute (meaning the session will not time out).
UNITS:minutes
default value :30"
::= { userEntry 6 }
userPasswordAgingInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..365)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute.
Conditions:../user-aaa-type = 'local'
UNITS:days
default value :0"
::= { userEntry 7 }
userPasswordExpirationDate OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute shows the password expiration date.
Conditions:../user-aaa-type = 'local'
"
::= { userEntry 8 }
userAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The attribute allows administrators to modify the user administration status.
default value :enabled"
::= { userEntry 9 }
userStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
passwordAged (3),
lockout (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute shows the user status.
User with status 'enabled' will have access to the system.
User with status 'disabled' not have access to the system.
User with status 'password-aged' will have access to the system but will be forced to change his password on first-time login.
User with status 'lockout' means the account is locked out due to unsuccessful login attempts.
default value :disabled"
::= { userEntry 10 }
userMaxSessions OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute specifies the maximum number of sessions allowed for this user.
default value :6"
::= { userEntry 11 }
userLastLoginDate OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last login date/time of the user.
default value :1970-01-01T00:00:00Z"
::= { userEntry 12 }
userAaaType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the authentication method of the user.
default value :local"
::= { userEntry 13 }
session OBJECT IDENTIFIER ::= { security 3 }
sessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { session 1 }
sessionEntry OBJECT-TYPE
SYNTAX SessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sessionTable"
INDEX { sessionId }
::= { sessionTable 1 }
SessionEntry ::=
SEQUENCE {
sessionId CoriantTypesSessionId,
sessionUser RowPointer,
sessionType INTEGER,
sessionProtocol INTEGER,
sessionCreatedTime IetfYangTypesDateAndTime,
sessionMode INTEGER
}
sessionId OBJECT-TYPE
SYNTAX CoriantTypesSessionId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies a unique identifier of the current session. It indicates the
IP address and transport layer port number associated with this session.
If the session is initiated from the serial port, the value is 'NA'.
"
::= { sessionEntry 1 }
sessionUser OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Points to a user instance.
Conditions:../session-mode = 'server'
"
::= { sessionEntry 2 }
sessionType OBJECT-TYPE
SYNTAX INTEGER {
cli (1),
snmp (2),
netconf (3),
restconf (4),
webgui (5),
gnmi (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Session type.
"
::= { sessionEntry 3 }
sessionProtocol OBJECT-TYPE
SYNTAX INTEGER {
telnet (1),
telnetRaw (2),
serial (3),
ssh (4),
sshRaw (5),
https (6),
http (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates which protocol has been used to establish the session.
"
::= { sessionEntry 4 }
sessionCreatedTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timestamp the user has created this session.
"
::= { sessionEntry 5 }
sessionMode OBJECT-TYPE
SYNTAX INTEGER {
server (1),
client (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the device role in session connection
default value :server"
::= { sessionEntry 6 }
aaaServer OBJECT IDENTIFIER ::= { security 4 }
aaaServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { aaaServer 1 }
aaaServerEntry OBJECT-TYPE
SYNTAX AaaServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of aaaServerTable"
INDEX { aaaServerServerName }
::= { aaaServerTable 1 }
AaaServerEntry ::=
SEQUENCE {
aaaServerServerName OCTET STRING,
aaaServerServerPriority Unsigned32,
aaaServerProtocolSupported INTEGER,
aaaServerServerIp IetfInetTypesIpAddress,
aaaServerServerPort IetfInetTypesPortNumber,
aaaServerSharedSecret OCTET STRING,
aaaServerRoleSupported BITS,
aaaServerAdminStatus INTEGER,
aaaServerTimeOut Unsigned32,
aaaServerRetry Unsigned32,
aaaServerServerPortAuthentication IetfInetTypesPortNumber,
aaaServerServerPortAccounting IetfInetTypesPortNumber,
aaaServerSourceIp OCTET STRING
}
aaaServerServerName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specify the name of aaa server.
"
::= { aaaServerEntry 1 }
aaaServerServerPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is used to sort the servers in the order of precedence.
"
::= { aaaServerEntry 2 }
aaaServerProtocolSupported OBJECT-TYPE
SYNTAX INTEGER {
tacacsplus (1),
radius (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specify the protocol used for AAA.
"
::= { aaaServerEntry 3 }
aaaServerServerIp OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of AAA server.
"
::= { aaaServerEntry 4 }
aaaServerServerPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AAA server port number.
Conditions:../protocol-supported = 'TACACSPLUS'
default value :49"
::= { aaaServerEntry 5 }
aaaServerSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The shared secret of the aaa server. The shared secret will be displayed as *.
default value :sharedkey"
::= { aaaServerEntry 6 }
aaaServerRoleSupported OBJECT-TYPE
SYNTAX BITS {
authentication (0),
authorization (1),
accounting (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specify the role of the server for AAA.
default value :authentication authorization accounting"
::= { aaaServerEntry 7 }
aaaServerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { aaaServerEntry 8 }
aaaServerTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the response timeout of Access-Request messages sent to a AAA server in seconds.
UNITS:seconds
default value :5"
::= { aaaServerEntry 9 }
aaaServerRetry OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication.
default value :3"
::= { aaaServerEntry 10 }
aaaServerServerPortAuthentication OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AAA server authentication port number.
Conditions:../protocol-supported = 'RADIUS'
default value :1812"
::= { aaaServerEntry 11 }
aaaServerServerPortAccounting OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AAA server accounting port number.
Conditions:../protocol-supported = 'RADIUS'
default value :1813"
::= { aaaServerEntry 12 }
aaaServerSourceIp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP address used for RADIUS communications.
Conditions:../protocol-supported = 'RADIUS'
default value :auto"
::= { aaaServerEntry 13 }
keySyncSession OBJECT IDENTIFIER ::= { security 5 }
keySyncSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF KeySyncSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TLS session to synchronize ODU encryption key."
::= { keySyncSession 1 }
keySyncSessionEntry OBJECT-TYPE
SYNTAX KeySyncSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of keySyncSessionTable"
INDEX { keySyncSessionId }
::= { keySyncSessionTable 1 }
KeySyncSessionEntry ::=
SEQUENCE {
keySyncSessionId Unsigned32,
keySyncSessionAdminStatus INTEGER,
keySyncSessionSessionStatus INTEGER,
keySyncSessionRemoteIp IetfInetTypesIpv4Address,
keySyncSessionRemotePort IetfInetTypesPortNumber,
keySyncSessionLocalIp IetfInetTypesIpv4Address,
keySyncSessionLocalPort IetfInetTypesPortNumber,
keySyncSessionSourceAddressFrom KeySyncSessionInterfaceRef,
keySyncSessionConnectedTime IetfYangTypesDateAndTime,
keySyncSessionType INTEGER,
keySyncSessionAuthType INTEGER,
keySyncSessionLocalCertificate KeySyncSessionCertificateRef
}
keySyncSessionId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies a unique identifier of the key synchronization session.
"
::= { keySyncSessionEntry 1 }
keySyncSessionAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
upNoAlm (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up"
::= { keySyncSessionEntry 2 }
keySyncSessionSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
disabled (1),
connecting (2),
incomplete (3),
connected (4),
unreachable (5),
failedAuth (6),
failed (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the status of key sync session.
"
::= { keySyncSessionEntry 4 }
keySyncSessionRemoteIp OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of remote session server.
"
::= { keySyncSessionEntry 5 }
keySyncSessionRemotePort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port number of remote session server.
default value :8443"
::= { keySyncSessionEntry 6 }
keySyncSessionLocalIp OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source IP address of a manual session.
"
::= { keySyncSessionEntry 7 }
keySyncSessionLocalPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source port number of a manual session.
"
::= { keySyncSessionEntry 8 }
keySyncSessionSourceAddressFrom OBJECT-TYPE
SYNTAX KeySyncSessionInterfaceRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specifies the interface of the source IP address of the outgoing packets.
Conditions:../key-sync-session-type = 'manual'
default value :auto"
::= { keySyncSessionEntry 9 }
keySyncSessionConnectedTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timestamp the user has created this session.
"
::= { keySyncSessionEntry 10 }
keySyncSessionType OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the type of key sync session,
'manual' is for the session user configured, and 'auto' is for the session automatically created by system.
default value :manual"
::= { keySyncSessionEntry 11 }
keySyncSessionAuthType OBJECT-TYPE
SYNTAX INTEGER {
tlsCertificate (1),
proprietaryPsk (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicating the authentication type of the key sync session.
default value :proprietary-psk"
::= { keySyncSessionEntry 12 }
keySyncSessionLocalCertificate OBJECT-TYPE
SYNTAX KeySyncSessionCertificateRef
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Previously installed certificate that authenticates the NE.
default value :none"
::= { keySyncSessionEntry 13 }
pskMap OBJECT IDENTIFIER ::= { security 7 }
pskMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF PskMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { pskMap 1 }
pskMapEntry OBJECT-TYPE
SYNTAX PskMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pskMapTable"
INDEX { pskMapPskIdentity }
::= { pskMapTable 1 }
PskMapEntry ::=
SEQUENCE {
pskMapPskIdentity OCTET STRING,
pskMapKey IetfYangTypesHexString,
pskMapPskStatus INTEGER,
pskMapPskInfo OCTET STRING,
pskMapWarningTimer Unsigned32,
pskMapCriticalTimer Unsigned32,
pskMapTrafficOffTimer Unsigned32,
pskMapEffectiveTimestamp IetfYangTypesDateAndTime
}
pskMapPskIdentity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PSK identity encoded as a UTF-8 string. For
details how certain common PSK identity formats can
be encoded in UTF-8, see section 5.1. of RFC 4279.
"
::= { pskMapEntry 1 }
pskMapKey OBJECT-TYPE
SYNTAX IetfYangTypesHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The key associated with the PSK identity
"
::= { pskMapEntry 2 }
pskMapPskStatus OBJECT-TYPE
SYNTAX INTEGER {
init (1),
sync (2),
fail (3),
authenticate (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map updating cannot be cancelled if psk-status is candidate-key-authenticate.
default value :init"
::= { pskMapEntry 4 }
pskMapPskInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The label of the psk-map.
default value :"
::= { pskMapEntry 5 }
pskMapWarningTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Warning Time before psk-map updating completes.
UNITS:minutes
default value :5"
::= { pskMapEntry 6 }
pskMapCriticalTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..480)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Critical time before psk-map updating completes.
UNITS:minutes
default value :30"
::= { pskMapEntry 7 }
pskMapTrafficOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Traffic off time before psk-map updating completes.
UNITS:minutes
default value :1440"
::= { pskMapEntry 8 }
pskMapEffectiveTimestamp OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the Time of new psk starts to take effect.
"
::= { pskMapEntry 9 }
key OBJECT IDENTIFIER ::= { security 9 }
keyTable OBJECT-TYPE
SYNTAX SEQUENCE OF KeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A key maintained by the keystore."
::= { key 1 }
keyEntry OBJECT-TYPE
SYNTAX KeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of keyTable"
INDEX { keyName }
::= { keyTable 1 }
KeyEntry ::=
SEQUENCE {
keyName OCTET STRING,
keyAlgorithmIdentifier INTEGER,
keyPublicKey OCTET STRING
}
keyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An arbitrary name for the key.
"
::= { keyEntry 1 }
keyAlgorithmIdentifier OBJECT-TYPE
SYNTAX INTEGER {
rsa1024 (1),
rsa2048 (2),
rsa3072 (3),
rsa4096 (4),
rsa7680 (5),
rsa15360 (6),
secp192r1 (7),
secp256r1 (8),
secp384r1 (9),
secp521r1 (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies which algorithm is to be used with the key.
This value determines how the 'private-key' and 'public-key' fields are interpreted.
"
::= { keyEntry 2 }
keyPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A binary string that contains the value of the public key.
The interpretation of the content is defined in the registration of the key algorithm.
For example, a DSA key is an INTEGER, an RSA key is represented as RSAPublicKey as defined in [RFC3447], and an Elliptic Curve Cryptography (ECC) key is represented using the 'publicKey' described in [RFC5915]
"
::= { keyEntry 3 }
certificate OBJECT IDENTIFIER ::= { security 10 }
certificateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CertificateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A certificate for this private key."
::= { certificate 1 }
certificateEntry OBJECT-TYPE
SYNTAX CertificateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of certificateTable"
INDEX { keyName,certificateName }
::= { certificateTable 1 }
CertificateEntry ::=
SEQUENCE {
certificateName OCTET STRING,
certificateVersion INTEGER,
certificateSerialNumber OCTET STRING,
certificateSignatureAlgorithm OCTET STRING,
certificateIssuer OCTET STRING,
certificateValidFrom OCTET STRING,
certificateValidTo OCTET STRING,
certificateSubject OCTET STRING,
certificatePublicKeyAlgorithm OCTET STRING,
certificateSubjectAltName OCTET STRING
}
certificateName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An arbitrary name for the certificate. The name
must be a unique across all keys, not just within
this key.
"
::= { certificateEntry 1 }
certificateVersion OBJECT-TYPE
SYNTAX INTEGER {
x509v1 (1),
x509v2 (2),
x509v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "version of the certificate.
default value :x509v1"
::= { certificateEntry 2 }
certificateSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "serial number of the certificate.
"
::= { certificateEntry 3 }
certificateSignatureAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "signature algorithm of the certificate.
"
::= { certificateEntry 4 }
certificateIssuer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "issuer of the certificate.
"
::= { certificateEntry 5 }
certificateValidFrom OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-from date and time of the certificate.
"
::= { certificateEntry 6 }
certificateValidTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-to date and time of the certificate.
"
::= { certificateEntry 7 }
certificateSubject OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "subject of the certificate.
"
::= { certificateEntry 8 }
certificatePublicKeyAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "public-key-algorithm of the certificate.
"
::= { certificateEntry 9 }
certificateSubjectAltName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subject Alternative Names of the certificate.
"
::= { certificateEntry 10 }
trustedCertificateGroup OBJECT IDENTIFIER ::= { security 11 }
trustedCertificateGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrustedCertificateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of trusted certificates.
These certificates can be used by a server to authenticate clients, or by clients to authenticate servers.
The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once.
Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules.
For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates."
::= { trustedCertificateGroup 1 }
trustedCertificateGroupEntry OBJECT-TYPE
SYNTAX TrustedCertificateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of trustedCertificateGroupTable"
INDEX { trustedCertificateGroupName }
::= { trustedCertificateGroupTable 1 }
TrustedCertificateGroupEntry ::=
SEQUENCE {
trustedCertificateGroupName OCTET STRING
}
trustedCertificateGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An arbitrary name for this list of trusted certificates.
"
::= { trustedCertificateGroupEntry 1 }
trustedCertificate OBJECT IDENTIFIER ::= { security 12 }
trustedCertificateTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrustedCertificateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A trusted certificate for a specific use.
Note, this 'certificate' is a list in order to encode any associated intermediate certificates."
::= { trustedCertificate 1 }
trustedCertificateEntry OBJECT-TYPE
SYNTAX TrustedCertificateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of trustedCertificateTable"
INDEX { trustedCertificateGroupName,trustedCertificateName }
::= { trustedCertificateTable 1 }
TrustedCertificateEntry ::=
SEQUENCE {
trustedCertificateName OCTET STRING,
trustedCertificateVersion INTEGER,
trustedCertificateSerialNumber OCTET STRING,
trustedCertificateSignatureAlgorithm OCTET STRING,
trustedCertificateIssuer OCTET STRING,
trustedCertificateValidFrom OCTET STRING,
trustedCertificateValidTo OCTET STRING,
trustedCertificateSubject OCTET STRING,
trustedCertificatePublicKeyAlgorithm OCTET STRING,
trustedCertificateSubjectAltName OCTET STRING
}
trustedCertificateName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An arbitrary name for this trusted certificate.
Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values.
"
::= { trustedCertificateEntry 1 }
trustedCertificateVersion OBJECT-TYPE
SYNTAX INTEGER {
x509v1 (1),
x509v2 (2),
x509v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "version of the certificate.
default value :x509v1"
::= { trustedCertificateEntry 2 }
trustedCertificateSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "serial number of the certificate.
"
::= { trustedCertificateEntry 3 }
trustedCertificateSignatureAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "signature algorithm of the certificate.
"
::= { trustedCertificateEntry 4 }
trustedCertificateIssuer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "issuer of the certificate.
"
::= { trustedCertificateEntry 5 }
trustedCertificateValidFrom OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-from date and time of the certificate.
"
::= { trustedCertificateEntry 6 }
trustedCertificateValidTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-to date and time of the certificate.
"
::= { trustedCertificateEntry 7 }
trustedCertificateSubject OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "subject of the certificate.
"
::= { trustedCertificateEntry 8 }
trustedCertificatePublicKeyAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "public-key-algorithm of the certificate.
"
::= { trustedCertificateEntry 9 }
trustedCertificateSubjectAltName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subject Alternative Names of the certificate.
"
::= { trustedCertificateEntry 10 }
authorizedKey OBJECT IDENTIFIER ::= { security 14 }
authorizedKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthorizedKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { authorizedKey 1 }
authorizedKeyEntry OBJECT-TYPE
SYNTAX AuthorizedKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of authorizedKeyTable"
INDEX { userName,authorizedKeyName }
::= { authorizedKeyTable 1 }
AuthorizedKeyEntry ::=
SEQUENCE {
authorizedKeyName OCTET STRING,
authorizedKeyPublicKey OCTET STRING
}
authorizedKeyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "name of authorized key.
"
::= { authorizedKeyEntry 1 }
authorizedKeyPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "one of the authorized public keys of the user.
"
::= { authorizedKeyEntry 2 }
certificateChain OBJECT IDENTIFIER ::= { security 15 }
certificateChainTable OBJECT-TYPE
SYNTAX SEQUENCE OF CertificateChainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "certificate chain."
::= { certificateChain 1 }
certificateChainEntry OBJECT-TYPE
SYNTAX CertificateChainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of certificateChainTable"
INDEX { keyName,certificateName,certificateChainLevel }
::= { certificateChainTable 1 }
CertificateChainEntry ::=
SEQUENCE {
certificateChainLevel OCTET STRING,
certificateChainVersion INTEGER,
certificateChainSerialNumber OCTET STRING,
certificateChainSignatureAlgorithm OCTET STRING,
certificateChainIssuer OCTET STRING,
certificateChainValidFrom OCTET STRING,
certificateChainValidTo OCTET STRING,
certificateChainSubject OCTET STRING,
certificateChainPublicKeyAlgorithm OCTET STRING,
certificateChainSubjectAltName OCTET STRING
}
certificateChainLevel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "certificate chain level.
"
::= { certificateChainEntry 1 }
certificateChainVersion OBJECT-TYPE
SYNTAX INTEGER {
x509v1 (1),
x509v2 (2),
x509v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "version of the certificate.
default value :x509v1"
::= { certificateChainEntry 2 }
certificateChainSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "serial number of the certificate.
"
::= { certificateChainEntry 3 }
certificateChainSignatureAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "signature algorithm of the certificate.
"
::= { certificateChainEntry 4 }
certificateChainIssuer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "issuer of the certificate.
"
::= { certificateChainEntry 5 }
certificateChainValidFrom OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-from date and time of the certificate.
"
::= { certificateChainEntry 6 }
certificateChainValidTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "valid-to date and time of the certificate.
"
::= { certificateChainEntry 7 }
certificateChainSubject OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "subject of the certificate.
"
::= { certificateChainEntry 8 }
certificateChainPublicKeyAlgorithm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "public-key-algorithm of the certificate.
"
::= { certificateChainEntry 9 }
certificateChainSubjectAltName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..2000))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subject Alternative Names of the certificate.
"
::= { certificateChainEntry 10 }
nbi OBJECT IDENTIFIER ::= { groove 8 }
snmp OBJECT IDENTIFIER ::= { nbi 1 }
snmpv3 OBJECT IDENTIFIER ::= { snmp 1 }
snmpv3Table OBJECT-TYPE
SYNTAX SEQUENCE OF Snmpv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SNMPv3 configuration for user"
::= { snmpv3 1 }
snmpv3Entry OBJECT-TYPE
SYNTAX Snmpv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of snmpv3Table"
INDEX { userName }
::= { snmpv3Table 1 }
Snmpv3Entry ::=
SEQUENCE {
snmpv3UserSecLevel INTEGER,
snmpv3AuthProtocol INTEGER,
snmpv3AuthPassphrase OCTET STRING,
snmpv3PrivProtocol INTEGER,
snmpv3PrivPassphrase OCTET STRING
}
snmpv3UserSecLevel OBJECT-TYPE
SYNTAX INTEGER {
authPriv (1),
authNoPriv (2),
noAuthNoPriv (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the SNMPv3 user security level.
default value :no-auth-no-priv"
::= { snmpv3Entry 1 }
snmpv3AuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
md5 (1),
sha (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the authentication protocol that the SNMPv3 user being created will use.
Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')
default value :SHA"
::= { snmpv3Entry 2 }
snmpv3AuthPassphrase OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|8..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the SNMPv3 authentication pass phrase.
Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')
"
::= { snmpv3Entry 3 }
snmpv3PrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
des (1),
aes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the privacy protocol that the SNMPv3 user being created will use.
Conditions:../user-sec-level = 'auth-priv'
default value :AES"
::= { snmpv3Entry 4 }
snmpv3PrivPassphrase OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|8..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the SNMPv3 privacy pass phrase.
Conditions:../user-sec-level = 'auth-priv'
"
::= { snmpv3Entry 5 }
snmpInfo OBJECT IDENTIFIER ::= { snmp 2 }
snmpEngineId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "snmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of the MAC addresses Pool of the NE.
"
::= { snmpInfo 1 }
snmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable global SNMP access
default value :true"
::= { snmpInfo 2 }
snmpContactInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNMP contact info of the NE. Default value is device info. Allow user defined value
default value :https://www.infinera.com"
::= { snmpInfo 3 }
snmpCommunity OBJECT IDENTIFIER ::= { snmp 3 }
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO."
::= { snmpCommunity 1 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of snmpCommunityTable"
INDEX { snmpCommunityCommunityString }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::=
SEQUENCE {
snmpCommunityCommunityString CoriantTypesSnmpString,
snmpCommunityCommunityStringAccess INTEGER
}
snmpCommunityCommunityString OBJECT-TYPE
SYNTAX CoriantTypesSnmpString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Community String.
"
::= { snmpCommunityEntry 1 }
snmpCommunityCommunityStringAccess OBJECT-TYPE
SYNTAX INTEGER {
readOnly (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "snmp access right of this community string.
default value :read-only"
::= { snmpCommunityEntry 2 }
snmpTarget OBJECT IDENTIFIER ::= { snmp 4 }
snmpTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of SNMP targets (trap listeners)"
::= { snmpTarget 1 }
snmpTargetEntry OBJECT-TYPE
SYNTAX SnmpTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of snmpTargetTable"
INDEX { snmpTargetTargetName }
::= { snmpTargetTable 1 }
SnmpTargetEntry ::=
SEQUENCE {
snmpTargetSnmpVersion INTEGER,
snmpTargetSnmpv3User RowPointer,
snmpTargetTargetName OCTET STRING,
snmpTargetTargetIp IetfInetTypesIpAddress,
snmpTargetTargetPort IetfInetTypesPortNumber,
snmpTargetTargetTransport INTEGER,
snmpTargetTrapCommunityString CoriantTypesSnmpString
}
snmpTargetSnmpVersion OBJECT-TYPE
SYNTAX INTEGER {
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "snmp version.
default value :v2c"
::= { snmpTargetEntry 1 }
snmpTargetSnmpv3User OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate the snmpv3 user.
Conditions:../snmp-version = 'v3'
"
::= { snmpTargetEntry 2 }
snmpTargetTargetName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the SNMP target
"
::= { snmpTargetEntry 3 }
snmpTargetTargetIp OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the SNMP target
"
::= { snmpTargetEntry 4 }
snmpTargetTargetPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "UDP port number.
default value :162"
::= { snmpTargetEntry 5 }
snmpTargetTargetTransport OBJECT-TYPE
SYNTAX INTEGER {
udp (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of transport for the SNMP target
default value :udp"
::= { snmpTargetEntry 6 }
snmpTargetTrapCommunityString OBJECT-TYPE
SYNTAX CoriantTypesSnmpString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Community string used for SNMP traps
Conditions:../snmp-version = 'v2c'
default value :groove"
::= { snmpTargetEntry 7 }
cli OBJECT IDENTIFIER ::= { nbi 2 }
cliConfig OBJECT IDENTIFIER ::= { cli 1 }
cliConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CliConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { cliConfig 1 }
cliConfigEntry OBJECT-TYPE
SYNTAX CliConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cliConfigTable"
INDEX { sessionId }
::= { cliConfigTable 1 }
CliConfigEntry ::=
SEQUENCE {
cliConfigCliLines Unsigned32,
cliConfigCliColumns Unsigned32,
cliConfigMaxHistorySize Unsigned32,
cliConfigInteractiveMode CoriantTypesEnableSwitch
}
cliConfigCliLines OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of rows to be used for display. This value is automatically
discovered when possible
default value :40"
::= { cliConfigEntry 1 }
cliConfigCliColumns OBJECT-TYPE
SYNTAX Unsigned32 (80..4000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of columns to be used for display. This value is automatically
discovered when possible
default value :140"
::= { cliConfigEntry 2 }
cliConfigMaxHistorySize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Command history maximum size for the current session
default value :500"
::= { cliConfigEntry 3 }
cliConfigInteractiveMode OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION " This determines if the CLI shall issue interactive prompt (e.g. for prompting
additional information, or for confirmation of user initiated actions).
Enabled = CLI will prompt user (default)
Disabled = CLI will suppress any prompt to the user
This parameter is set per CLI session and is not persistent.
default value :enabled"
::= { cliConfigEntry 4 }
restconf OBJECT IDENTIFIER ::= { nbi 3 }
restconfRestHttpSupport OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines if the HTTP port (8080) is enabled for RESTCONF
default value :disabled"
::= { restconf 1 }
restconfRestHttpsSupport OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines if the HTTPS port (8181) is enabled for RESTCONF
default value :enabled"
::= { restconf 2 }
restconfRestSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timeout of a cookie based RESTCONF session.
The cookie expiration date is reset every time there is activity on the session.
UNITS:minutes
default value :5"
::= { restconf 3 }
restconfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable RESTCONF access
default value :true"
::= { restconf 4 }
cliAlias OBJECT IDENTIFIER ::= { nbi 4 }
cliAliasTable OBJECT-TYPE
SYNTAX SEQUENCE OF CliAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of aliases used in CLI.
Can only be accessed via 'alias/unalias' CLI commands."
::= { cliAlias 1 }
cliAliasEntry OBJECT-TYPE
SYNTAX CliAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cliAliasTable"
INDEX { cliAliasName }
::= { cliAliasTable 1 }
CliAliasEntry ::=
SEQUENCE {
cliAliasName OCTET STRING,
cliAliasValue OCTET STRING
}
cliAliasName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the alias
"
::= { cliAliasEntry 1 }
cliAliasValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Value of the alias
"
::= { cliAliasEntry 2 }
cliScript OBJECT IDENTIFIER ::= { nbi 5 }
cliScriptTable OBJECT-TYPE
SYNTAX SEQUENCE OF CliScriptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of available CLI scripts.
Scripts can be executed with the 'run' command"
::= { cliScript 1 }
cliScriptEntry OBJECT-TYPE
SYNTAX CliScriptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cliScriptTable"
INDEX { cliScriptScriptName }
::= { cliScriptTable 1 }
CliScriptEntry ::=
SEQUENCE {
cliScriptScriptName OCTET STRING,
cliScriptDescription OCTET STRING
}
cliScriptScriptName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "File name of the CLI script
"
::= { cliScriptEntry 1 }
cliScriptDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Description of the CLI script
"
::= { cliScriptEntry 2 }
netconf OBJECT IDENTIFIER ::= { nbi 6 }
netconfAnnotateCliName OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, annotates NETCONF XML output with cli names for traceability.
default value :disabled"
::= { netconf 1 }
netconfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable NETCONF access
default value :true"
::= { netconf 2 }
grpc OBJECT IDENTIFIER ::= { nbi 7 }
grpcEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configurable switch to enable or disable gRPC/gNMI access
default value :true"
::= { grpc 1 }
filesw OBJECT IDENTIFIER ::= { groove 9 }
softwareload OBJECT IDENTIFIER ::= { filesw 2 }
softwareloadTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoftwareloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of the software loads in the system."
::= { softwareload 1 }
softwareloadEntry OBJECT-TYPE
SYNTAX SoftwareloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of softwareloadTable"
INDEX { softwareloadSwloadId }
::= { softwareloadTable 1 }
SoftwareloadEntry ::=
SEQUENCE {
softwareloadSwloadId Unsigned32,
softwareloadSwloadState INTEGER,
softwareloadSwloadVersion CoriantFileSwTypesSwVersion,
softwareloadSwloadVendor CoriantFileSwTypesSwloadVendor,
softwareloadSwloadProduct CoriantFileSwTypesSwloadProduct,
softwareloadSwloadLabel OCTET STRING
}
softwareloadSwloadId OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
software load identifier which is uniquely identify specific software load.
"
::= { softwareloadEntry 1 }
softwareloadSwloadState OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the state of the software load.
"
::= { softwareloadEntry 2 }
softwareloadSwloadVersion OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the software version of the software load.
"
::= { softwareloadEntry 3 }
softwareloadSwloadVendor OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwloadVendor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Vendor information of the software load.
"
::= { softwareloadEntry 4 }
softwareloadSwloadProduct OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwloadProduct
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the network element family this software belongs to.
"
::= { softwareloadEntry 5 }
softwareloadSwloadLabel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The label of the software load including summary information.
"
::= { softwareloadEntry 6 }
database OBJECT IDENTIFIER ::= { filesw 3 }
databaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The list of the databases in the system."
::= { database 1 }
databaseEntry OBJECT-TYPE
SYNTAX DatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of databaseTable"
INDEX { softwareloadSwloadId,databaseId }
::= { databaseTable 1 }
DatabaseEntry ::=
SEQUENCE {
databaseId Unsigned32,
databaseState INTEGER,
databaseVersion CoriantFileSwTypesSwVersion,
databaseVendor CoriantFileSwTypesSwloadVendor,
databaseProduct CoriantFileSwTypesSwloadProduct,
databaseBackupTime OCTET STRING
}
databaseId OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
database identifier which is uniquely identify specific database.
"
::= { databaseEntry 1 }
databaseState OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the state of the database.
"
::= { databaseEntry 2 }
databaseVersion OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the database version.
"
::= { databaseEntry 3 }
databaseVendor OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwloadVendor
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Vendor information of the database.
"
::= { databaseEntry 4 }
databaseProduct OBJECT-TYPE
SYNTAX CoriantFileSwTypesSwloadProduct
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the network element family this database belongs to.
"
::= { databaseEntry 5 }
databaseBackupTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the database last backup time.
default value :"
::= { databaseEntry 6 }
fwVersionMap OBJECT IDENTIFIER ::= { filesw 4 }
fwVersionMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FwVersionMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The firmware information of the upgradable devices included in the software load."
::= { fwVersionMap 1 }
fwVersionMapEntry OBJECT-TYPE
SYNTAX FwVersionMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fwVersionMapTable"
INDEX { softwareloadSwloadId,fwVersionMapDeviceName }
::= { fwVersionMapTable 1 }
FwVersionMapEntry ::=
SEQUENCE {
fwVersionMapDeviceName CoriantFileSwTypesDeviceName,
fwVersionMapDeviceFwVersion CoriantFileSwTypesDeviceFwVersion
}
fwVersionMapDeviceName OBJECT-TYPE
SYNTAX CoriantFileSwTypesDeviceName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the name of the device.
"
::= { fwVersionMapEntry 1 }
fwVersionMapDeviceFwVersion OBJECT-TYPE
SYNTAX CoriantFileSwTypesDeviceFwVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the version of the firmware.
"
::= { fwVersionMapEntry 2 }
currentFwVersion OBJECT IDENTIFIER ::= { filesw 5 }
currentFwVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurrentFwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The firmware information of the upgradable devices included in the software load."
::= { currentFwVersion 1 }
currentFwVersionEntry OBJECT-TYPE
SYNTAX CurrentFwVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of currentFwVersionTable"
INDEX { currentFwVersionEquipmentEntity,currentFwVersionDeviceName }
::= { currentFwVersionTable 1 }
CurrentFwVersionEntry ::=
SEQUENCE {
currentFwVersionEquipmentEntity RowPointer,
currentFwVersionFwEquipmentType CoriantTypesEquipmentType,
currentFwVersionDeviceName CoriantFileSwTypesDeviceName,
currentFwVersionDeviceFwVersion CoriantFileSwTypesDeviceFwVersion,
currentFwVersionFwState INTEGER,
currentFwVersionSystemFwVersion CoriantFileSwTypesDeviceFwVersion
}
currentFwVersionEquipmentEntity OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the entity of the equipment carrying the device.
"
::= { currentFwVersionEntry 1 }
currentFwVersionFwEquipmentType OBJECT-TYPE
SYNTAX CoriantTypesEquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the type of the equipment carrying the device.
"
::= { currentFwVersionEntry 2 }
currentFwVersionDeviceName OBJECT-TYPE
SYNTAX CoriantFileSwTypesDeviceName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the name of the device.
"
::= { currentFwVersionEntry 3 }
currentFwVersionDeviceFwVersion OBJECT-TYPE
SYNTAX CoriantFileSwTypesDeviceFwVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the version of the firmware.
"
::= { currentFwVersionEntry 4 }
currentFwVersionFwState OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (0),
current (1),
notCurrent (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates firmware state of the device.
Current: indicates the loaded firmware is the version of current software load.
Not-current: indicates the loaded firmware is not the version of current software load.
default value :not-available"
::= { currentFwVersionEntry 5 }
currentFwVersionSystemFwVersion OBJECT-TYPE
SYNTAX CoriantFileSwTypesDeviceFwVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Indicates the version of the firmware in system appication.
"
::= { currentFwVersionEntry 6 }
rollbackPoint OBJECT IDENTIFIER ::= { filesw 6 }
rollbackPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF RollbackPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents a rollback point stored in the system.
A rollback point represents the system configuration of a specific point in time, that the user may create with the
'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command.
The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created.
The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created.
Rollback points can be deleted as any normal object.
A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will
be kept even after activation with the 'rollback' RPC."
::= { rollbackPoint 1 }
rollbackPointEntry OBJECT-TYPE
SYNTAX RollbackPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rollbackPointTable"
INDEX { rollbackPointId }
::= { rollbackPointTable 1 }
RollbackPointEntry ::=
SEQUENCE {
rollbackPointId Unsigned32,
rollbackPointCreationTime IetfYangTypesDateAndTime,
rollbackPointCreationTrigger CoriantTypesUserName,
rollbackPointDescription OCTET STRING,
rollbackPointType INTEGER
}
rollbackPointId OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100
"
::= { rollbackPointEntry 1 }
rollbackPointCreationTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp when this rollback-point was created
"
::= { rollbackPointEntry 2 }
rollbackPointCreationTrigger OBJECT-TYPE
SYNTAX CoriantTypesUserName
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the author user-name of this rollback-point
"
::= { rollbackPointEntry 3 }
rollbackPointDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..200))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User defined description of this rollback-point
"
::= { rollbackPointEntry 4 }
rollbackPointType OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
backup (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the rollback-point
default value :normal"
::= { rollbackPointEntry 5 }
logServer OBJECT IDENTIFIER ::= { filesw 8 }
logServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Grouping the configuration parameters for log forwarding."
::= { logServer 1 }
logServerEntry OBJECT-TYPE
SYNTAX LogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of logServerTable"
INDEX { logServerName }
::= { logServerTable 1 }
LogServerEntry ::=
SEQUENCE {
logServerName OCTET STRING,
logServerIpAddress IetfInetTypesIpAddress,
logServerTransport INTEGER,
logServerPort IetfInetTypesPortNumber,
logServerDestinationFacilityType CoriantTypesEnableSwitch,
logServerDestinationFacility OCTET STRING
}
logServerName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name for the endpoint to forwarding logs to.
"
::= { logServerEntry 1 }
logServerIpAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The leaf uniquely specifies the ipv4 address of the remote host.
"
::= { logServerEntry 2 }
logServerTransport OBJECT-TYPE
SYNTAX INTEGER {
tcp (1),
udp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the transport protocol used when forwarding logs.
default value :udp"
::= { logServerEntry 3 }
logServerPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This leaf specifies the port number used to deliver messages to the remote server.
default value :514"
::= { logServerEntry 4 }
logServerDestinationFacilityType OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Switching of the function destination-facility
default value :disabled"
::= { logServerEntry 5 }
logServerDestinationFacility OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This leaf specifies the facility used in messages delivered to the remote server.
default value :23"
::= { logServerEntry 6 }
logFacility OBJECT IDENTIFIER ::= { filesw 10 }
logFacilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogFacilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { logFacility 1 }
logFacilityEntry OBJECT-TYPE
SYNTAX LogFacilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of logFacilityTable"
INDEX { logServerName,logFacilityLogSelectorFacility }
::= { logFacilityTable 1 }
LogFacilityEntry ::=
SEQUENCE {
logFacilityLogSelectorFacility INTEGER,
logFacilityLogSelectorSeverity INTEGER,
logFacilityCompareOp INTEGER,
logFacilityEnabled TruthValue
}
logFacilityLogSelectorFacility OBJECT-TYPE
SYNTAX INTEGER {
security (1),
alarm (2),
event (3),
configuration (4),
cryptoConfiguration (5),
cryptoSecurity (6),
cryptoEvent (7),
cryptoAlarm (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The leaf uniquely identifies a syslog facility for forwarding.
"
::= { logFacilityEntry 1 }
logFacilityLogSelectorSeverity OBJECT-TYPE
SYNTAX INTEGER {
emergency (0),
alert (1),
critical (2),
error (3),
warning (4),
notice (5),
informational (6),
debug (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The system log selected severity level for forwarding
default value :debug"
::= { logFacilityEntry 2 }
logFacilityCompareOp OBJECT-TYPE
SYNTAX INTEGER {
equalsOrHigher (1),
equals (2),
notEquals (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This leaf describes the option to specify how the severity comparison is performed.
default value :equals-or-higher"
::= { logFacilityEntry 3 }
logFacilityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current operational state of the facility.
default value :true"
::= { logFacilityEntry 4 }
timeManager OBJECT IDENTIFIER ::= { groove 10 }
timeManagerInfo OBJECT IDENTIFIER ::= { timeManager 1 }
timeManagerTimezone OBJECT-TYPE
SYNTAX INTEGER {
internationalDateLineWestGmt1200 (1),
midwayIslandSamoaGmt1100 (2),
hawaiiGmt1000 (3),
alaskaGmt0900 (4),
pacificTimeUsAndCanadaGmt0800 (5),
arizonaGmt0700 (6),
mountainTimeUsAndCanadaGmt0700 (7),
centralamericaGmt0600 (8),
centralTimeUsAndCanadaGmt0600 (9),
mexicoCityTegucigalpaGmt0600 (10),
saskatchewanGmt0600 (11),
bagotaLimaQuitoGmt0500 (12),
easternTimeUsAndCanadaGmt0500 (13),
indianaEastGmt0500 (14),
caracasLaPazGmt0430 (15),
atlanticTimeCanadaGmt0400 (16),
santiagoGmt0400 (17),
newfoundlandGmt0330 (18),
brasiliaGmt0300 (19),
buenosAiresGeorgetownGmt0300 (20),
greenlandGmt0300 (21),
midAtlanticGmt0200 (22),
azoresGmt0100 (23),
capeVerdeIsGmt0100 (24),
casablancaMonroviaGmt (25),
greenwichMeanTimeDublinEdinburghLisbonLondonGmt (26),
amsterdamCopenhagenMadridParisvilniusGmtplus0100 (27),
belgradeSarajevoSkopjeSofijaZargrebGmtplus0100 (28),
bratislavaBudapestLjublijanaPragueWasawGmtplus0100 (29),
brusselsBerlinBernRomeStockholmViennaGmtplus0100 (30),
westCentralAfricaGmtplus0100 (31),
athensIstanbulMinskGmtplus0200 (32),
bucharestGmtplus0200 (33),
cairoGmtplus0200 (34),
hararePretoriaGmtplus0200 (35),
helsinkiRigaTallinnGmtplus0200 (36),
jerusalemGmtplus0200 (37),
israelGmtplus0200 (38),
baghdadGmtplus0300 (39),
kuwaitRiyadhGmtplus0300 (40),
moscowStPetersburgVolgogradGmtplus0300 (41),
nairobiGmtplus0300 (42),
tehranGmtplus0330 (43),
abuDhabiMuscatGmtplus0400 (44),
bakuGmtplus0400 (45),
tbilisiGmtplus0400 (46),
kabulGmtplus0430 (47),
ekaterinburgGmtplus0500 (48),
islamabadKarachiTashkentGmtplus0500 (49),
mumbaiCalcuttaChennaiNewDelhiGmtplus0530 (50),
colomboGmtplus0530 (51),
kathmanduGmtplus0545 (52),
dhakaGmtplus0600 (53),
almatyGmtplus0600 (54),
rangoonGmtplus0630 (55),
bangkokHanoiJakartaGmtplus0700 (56),
beijingChongqingHongKongUrumqiGmtplus0800 (57),
perthGmtplus0800 (58),
singaporeKualaLumpurGmtplus0800 (59),
taipeiGmtplus0800 (60),
osakaSapporoTokyoGmtplus0900 (61),
seoulGmtplus0900 (62),
yakutskGmtplus0900 (63),
adelaideGmtplus0930 (64),
darwinGmtplus0930 (65),
brisbaneGmtplus1000 (66),
canberraMelbourneSydneyGmtplus1000 (67),
guamPortMoresbyGmtplus1000 (68),
hobartGmtplus1000 (69),
vladivostokGmtplus1000 (70),
magadanSolomonIsNewCaledoniaGmtplus1100 (71),
aucklandWellingtonGmtplus1200 (72),
fijiKamchatkaMarshallIsGmtplus1200 (73),
eniwetokKwajaleinGmtplus1200 (74),
nukuAlofaGmtplus1300 (75),
kiritimatiGmtplus1400 (76),
universalTimeCoordinated (77)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the Name of the Time Zone of this NE.
default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT]"
::= { timeManagerInfo 1 }
timeManagerCurrentTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the current Date and Time of this NE.
"
::= { timeManagerInfo 2 }
timeManagerLastStartTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate the time of last system boot.
"
::= { timeManagerInfo 3 }
timeManagerUpTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicate how long the system has been running.
"
::= { timeManagerInfo 4 }
timeManagerTimeSourceState OBJECT-TYPE
SYNTAX INTEGER {
external (1),
freerun (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the state of the time source.
"
::= { timeManagerInfo 5 }
ntp OBJECT IDENTIFIER ::= { timeManager 2 }
ntpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if NTP is enabled.
default value :true"
::= { ntp 1 }
ntpCurrentTimeSource OBJECT-TYPE
SYNTAX IetfInetTypesIpAddressNoZone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the current time source.
default value :0.0.0.0"
::= { ntp 2 }
ntpAssociation OBJECT IDENTIFIER ::= { timeManager 3 }
ntpAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ntpAssociation 1 }
ntpAssociationEntry OBJECT-TYPE
SYNTAX NtpAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ntpAssociationTable"
INDEX { ntpAssociationSource }
::= { ntpAssociationTable 1 }
NtpAssociationEntry ::=
SEQUENCE {
ntpAssociationSource IetfInetTypesIpAddressNoZone,
ntpAssociationType INTEGER,
ntpAssociationPreferredNtpAssociation TruthValue,
ntpAssociationNtpAdminState INTEGER
}
ntpAssociationSource OBJECT-TYPE
SYNTAX IetfInetTypesIpAddressNoZone (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the ntp-association-source.
"
::= { ntpAssociationEntry 1 }
ntpAssociationType OBJECT-TYPE
SYNTAX INTEGER {
ntpServer (1),
ntpPeer (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the ntp association type.
default value :ntp-server"
::= { ntpAssociationEntry 2 }
ntpAssociationPreferredNtpAssociation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if this is preferred.
"
::= { ntpAssociationEntry 3 }
ntpAssociationNtpAdminState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The administrative state specifies the permission to use or prohibition against using the resource.
default value :up"
::= { ntpAssociationEntry 4 }
ntpAssociationStatus OBJECT IDENTIFIER ::= { timeManager 4 }
ntpAssociationStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAssociationStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { ntpAssociationStatus 1 }
ntpAssociationStatusEntry OBJECT-TYPE
SYNTAX NtpAssociationStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ntpAssociationStatusTable"
INDEX { ntpAssociationSource }
::= { ntpAssociationStatusTable 1 }
NtpAssociationStatusEntry ::=
SEQUENCE {
ntpAssociationStatusNtpAssociationRefid OCTET STRING,
ntpAssociationStatusNtpStratum Unsigned32,
ntpAssociationStatusNtpPollingInterval Unsigned32,
ntpAssociationStatusNtpPrecision OCTET STRING,
ntpAssociationStatusNtpAssociationOffset OCTET STRING,
ntpAssociationStatusNtpAssociationReach Unsigned32,
ntpAssociationStatusNtpAssociationDelay OCTET STRING,
ntpAssociationStatusNtpAssociationDispersion OCTET STRING
}
ntpAssociationStatusNtpAssociationRefid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference clock type or address for the peer.
"
::= { ntpAssociationStatusEntry 1 }
ntpAssociationStatusNtpStratum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified.
"
::= { ntpAssociationStatusEntry 2 }
ntpAssociationStatusNtpPollingInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds.
UNITS:seconds
"
::= { ntpAssociationStatusEntry 3 }
ntpAssociationStatusNtpPrecision OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds.
UNITS:milliseconds
"
::= { ntpAssociationStatusEntry 4 }
ntpAssociationStatusNtpAssociationOffset OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the offset between the local clock and the superior reference clock.
UNITS:milliseconds
"
::= { ntpAssociationStatusEntry 5 }
ntpAssociationStatusNtpAssociationReach OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the reachability of the configured server or peer.
"
::= { ntpAssociationStatusEntry 6 }
ntpAssociationStatusNtpAssociationDelay OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the delay between the local clock and the superior reference clock, in milliseconds.
UNITS:milliseconds
"
::= { ntpAssociationStatusEntry 7 }
ntpAssociationStatusNtpAssociationDispersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the dispersion between the local clock and the peer clock, in milliseconds.
UNITS:milliseconds
"
::= { ntpAssociationStatusEntry 8 }
ztc OBJECT IDENTIFIER ::= { groove 11 }
ztcInfo OBJECT IDENTIFIER ::= { ztc 1 }
ztcEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "enable/disable Zero Touch commissioning.
default value :true"
::= { ztcInfo 1 }
ztcStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (0),
ready (1),
ongoing (2),
failed (3),
done (4),
incomplete (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the ZTC process status:
disabled - ZTC will not be attempted because it was disabled via configuration
ready - ZTC will be attempted when able to communicate with external ZTC server
ongoing - ZTC is ongoing
failed - some problems occurred during ZTC
done - ZTC completed successfully
incomplete - ZTC incomplete.
default value :ready"
::= { ztcInfo 2 }
ztcProxy OBJECT-TYPE
SYNTAX CoriantTypesEnableSwitch
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The attribute will enable/disable the ztc proxy function for the subtending NEs.
default value :enabled"
::= { ztcInfo 3 }
ztcDhcpServer OBJECT-TYPE
SYNTAX IetfInetTypesIpv4Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The IPv4 address of the DHCP server for the DHCP relay agent when the ztc-proxy is enabled.
"
::= { ztcInfo 4 }
common OBJECT IDENTIFIER ::= { groove 13 }
bitErrorRatePreFec OBJECT IDENTIFIER ::= { common 1 }
bitErrorRatePreFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF BitErrorRatePreFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for bit error rate before fec, corresponding to pm parameter BER-FEC"
::= { bitErrorRatePreFec 1 }
bitErrorRatePreFecEntry OBJECT-TYPE
SYNTAX BitErrorRatePreFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bitErrorRatePreFecTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { bitErrorRatePreFecTable 1 }
BitErrorRatePreFecEntry ::=
SEQUENCE {
bitErrorRatePreFecInstant OCTET STRING,
bitErrorRatePreFecAvg OCTET STRING,
bitErrorRatePreFecMin OCTET STRING,
bitErrorRatePreFecMax OCTET STRING
}
bitErrorRatePreFecInstant OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePreFecEntry 1 }
bitErrorRatePreFecAvg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePreFecEntry 2 }
bitErrorRatePreFecMin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePreFecEntry 3 }
bitErrorRatePreFecMax OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePreFecEntry 4 }
bitErrorRatePostFec OBJECT IDENTIFIER ::= { common 2 }
bitErrorRatePostFecTable OBJECT-TYPE
SYNTAX SEQUENCE OF BitErrorRatePostFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for bit error rate post fec, corresponding to pm parameter BER-POST-FEC"
::= { bitErrorRatePostFec 1 }
bitErrorRatePostFecEntry OBJECT-TYPE
SYNTAX BitErrorRatePostFecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of bitErrorRatePostFecTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { bitErrorRatePostFecTable 1 }
BitErrorRatePostFecEntry ::=
SEQUENCE {
bitErrorRatePostFecInstant OCTET STRING,
bitErrorRatePostFecAvg OCTET STRING,
bitErrorRatePostFecMin OCTET STRING,
bitErrorRatePostFecMax OCTET STRING
}
bitErrorRatePostFecInstant OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePostFecEntry 1 }
bitErrorRatePostFecAvg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePostFecEntry 2 }
bitErrorRatePostFecMin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePostFecEntry 3 }
bitErrorRatePostFecMax OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:bit-ratio
"
::= { bitErrorRatePostFecEntry 4 }
inUtilization OBJECT IDENTIFIER ::= { common 3 }
inUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF InUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for RX utilization, corresponding to pm parameter Utilization"
::= { inUtilization 1 }
inUtilizationEntry OBJECT-TYPE
SYNTAX InUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inUtilizationTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { inUtilizationTable 1 }
InUtilizationEntry ::=
SEQUENCE {
inUtilizationInstant CoriantTypesPercentage,
inUtilizationAvg CoriantTypesPercentage,
inUtilizationMin CoriantTypesPercentage,
inUtilizationMax CoriantTypesPercentage
}
inUtilizationInstant OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inUtilizationEntry 1 }
inUtilizationAvg OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inUtilizationEntry 2 }
inUtilizationMin OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inUtilizationEntry 3 }
inUtilizationMax OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inUtilizationEntry 4 }
outUtilization OBJECT IDENTIFIER ::= { common 4 }
outUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for TX utilization, corresponding to pm parameter Utilization"
::= { outUtilization 1 }
outUtilizationEntry OBJECT-TYPE
SYNTAX OutUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outUtilizationTable"
INDEX { shelfId,slotId,subslotId,portId,subportId }
::= { outUtilizationTable 1 }
OutUtilizationEntry ::=
SEQUENCE {
outUtilizationInstant CoriantTypesPercentage,
outUtilizationAvg CoriantTypesPercentage,
outUtilizationMin CoriantTypesPercentage,
outUtilizationMax CoriantTypesPercentage
}
outUtilizationInstant OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outUtilizationEntry 1 }
outUtilizationAvg OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outUtilizationEntry 2 }
outUtilizationMin OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outUtilizationEntry 3 }
outUtilizationMax OBJECT-TYPE
SYNTAX CoriantTypesPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outUtilizationEntry 4 }
oduDelay OBJECT IDENTIFIER ::= { common 23 }
oduDelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF OduDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for measured odu signal delay, corresponding to pm parameter DELAY"
::= { oduDelay 1 }
oduDelayEntry OBJECT-TYPE
SYNTAX OduDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oduDelayTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,odutypeL1,oduidL1,odutypeL2,oduidL2,odutypeL3,oduidL3,odutypeL4,oduidL4 }
::= { oduDelayTable 1 }
OduDelayEntry ::=
SEQUENCE {
oduDelayInstant OCTET STRING,
oduDelayAvg OCTET STRING,
oduDelayMin OCTET STRING,
oduDelayMax OCTET STRING
}
oduDelayInstant OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:microseconds
"
::= { oduDelayEntry 1 }
oduDelayAvg OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:microseconds
"
::= { oduDelayEntry 2 }
oduDelayMin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:microseconds
"
::= { oduDelayEntry 3 }
oduDelayMax OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:microseconds
"
::= { oduDelayEntry 4 }
inOpticalPower OBJECT IDENTIFIER ::= { common 24 }
inOpticalPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF InOpticalPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for RX optical power, corresponding to pm parameter OPT"
::= { inOpticalPower 1 }
inOpticalPowerEntry OBJECT-TYPE
SYNTAX InOpticalPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inOpticalPowerTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,otsName,omsName,oscName,goptName,nmcName }
::= { inOpticalPowerTable 1 }
InOpticalPowerEntry ::=
SEQUENCE {
inOpticalPowerInstant CoriantTypesOpticalPower,
inOpticalPowerAvg CoriantTypesOpticalPower,
inOpticalPowerMin CoriantTypesOpticalPower,
inOpticalPowerMax CoriantTypesOpticalPower
}
inOpticalPowerInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inOpticalPowerEntry 1 }
inOpticalPowerAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inOpticalPowerEntry 2 }
inOpticalPowerMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inOpticalPowerEntry 3 }
inOpticalPowerMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inOpticalPowerEntry 4 }
outOpticalPower OBJECT IDENTIFIER ::= { common 25 }
outOpticalPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOpticalPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for TX optical power, corresponding to pm parameter OPR"
::= { outOpticalPower 1 }
outOpticalPowerEntry OBJECT-TYPE
SYNTAX OutOpticalPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outOpticalPowerTable"
INDEX { shelfId,slotId,subslotId,portId,subportId,otsName,omsName,oscName,goptName,nmcName }
::= { outOpticalPowerTable 1 }
OutOpticalPowerEntry ::=
SEQUENCE {
outOpticalPowerInstant CoriantTypesOpticalPower,
outOpticalPowerAvg CoriantTypesOpticalPower,
outOpticalPowerMin CoriantTypesOpticalPower,
outOpticalPowerMax CoriantTypesOpticalPower
}
outOpticalPowerInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outOpticalPowerEntry 1 }
outOpticalPowerAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outOpticalPowerEntry 2 }
outOpticalPowerMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outOpticalPowerEntry 3 }
outOpticalPowerMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outOpticalPowerEntry 4 }
differentialGroupDelay OBJECT IDENTIFIER ::= { common 26 }
differentialGroupDelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF DifferentialGroupDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for differential group delay, corresponding to pm parameter DGD"
::= { differentialGroupDelay 1 }
differentialGroupDelayEntry OBJECT-TYPE
SYNTAX DifferentialGroupDelayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of differentialGroupDelayTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { differentialGroupDelayTable 1 }
DifferentialGroupDelayEntry ::=
SEQUENCE {
differentialGroupDelayInstant Unsigned32,
differentialGroupDelayAvg Unsigned32,
differentialGroupDelayMin Unsigned32,
differentialGroupDelayMax Unsigned32
}
differentialGroupDelayInstant OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:ps
"
::= { differentialGroupDelayEntry 1 }
differentialGroupDelayAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:ps
"
::= { differentialGroupDelayEntry 2 }
differentialGroupDelayMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:ps
"
::= { differentialGroupDelayEntry 3 }
differentialGroupDelayMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:ps
"
::= { differentialGroupDelayEntry 4 }
chromaticDispersion OBJECT IDENTIFIER ::= { common 27 }
chromaticDispersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChromaticDispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for chromatic dispersion, corresponding to pm parameter CD"
::= { chromaticDispersion 1 }
chromaticDispersionEntry OBJECT-TYPE
SYNTAX ChromaticDispersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of chromaticDispersionTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { chromaticDispersionTable 1 }
ChromaticDispersionEntry ::=
SEQUENCE {
chromaticDispersionInstant INTEGER,
chromaticDispersionAvg INTEGER,
chromaticDispersionMin INTEGER,
chromaticDispersionMax INTEGER
}
chromaticDispersionInstant OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:ps/nm
"
::= { chromaticDispersionEntry 1 }
chromaticDispersionAvg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:ps/pm
"
::= { chromaticDispersionEntry 2 }
chromaticDispersionMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:ps/pm
"
::= { chromaticDispersionEntry 3 }
chromaticDispersionMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:ps/pm
"
::= { chromaticDispersionEntry 4 }
osnr OBJECT IDENTIFIER ::= { common 28 }
osnrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OsnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for osnr, corresponding to pm parameter OSNR"
::= { osnr 1 }
osnrEntry OBJECT-TYPE
SYNTAX OsnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of osnrTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { osnrTable 1 }
OsnrEntry ::=
SEQUENCE {
osnrInstant CoriantTypesDBPrecision1,
osnrAvg CoriantTypesDBPrecision1,
osnrMin CoriantTypesDBPrecision1,
osnrMax CoriantTypesDBPrecision1
}
osnrInstant OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { osnrEntry 1 }
osnrAvg OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { osnrEntry 2 }
osnrMin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { osnrEntry 3 }
osnrMax OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { osnrEntry 4 }
qFactor OBJECT IDENTIFIER ::= { common 29 }
qFactorTable OBJECT-TYPE
SYNTAX SEQUENCE OF QFactorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for q-factor, corresponding to pm parameter Q-factor"
::= { qFactor 1 }
qFactorEntry OBJECT-TYPE
SYNTAX QFactorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of qFactorTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { qFactorTable 1 }
QFactorEntry ::=
SEQUENCE {
qFactorInstant CoriantTypesDBPrecision1,
qFactorAvg CoriantTypesDBPrecision1,
qFactorMin CoriantTypesDBPrecision1,
qFactorMax CoriantTypesDBPrecision1
}
qFactorInstant OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { qFactorEntry 1 }
qFactorAvg OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { qFactorEntry 2 }
qFactorMin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { qFactorEntry 3 }
qFactorMax OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { qFactorEntry 4 }
polarizationDependentLoss OBJECT IDENTIFIER ::= { common 30 }
polarizationDependentLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolarizationDependentLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for polarization dependent loss, corresponding to pm parameter PDL"
::= { polarizationDependentLoss 1 }
polarizationDependentLossEntry OBJECT-TYPE
SYNTAX PolarizationDependentLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of polarizationDependentLossTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { polarizationDependentLossTable 1 }
PolarizationDependentLossEntry ::=
SEQUENCE {
polarizationDependentLossInstant CoriantTypesDBPrecision1,
polarizationDependentLossAvg CoriantTypesDBPrecision1,
polarizationDependentLossMin CoriantTypesDBPrecision1,
polarizationDependentLossMax CoriantTypesDBPrecision1
}
polarizationDependentLossInstant OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { polarizationDependentLossEntry 1 }
polarizationDependentLossAvg OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { polarizationDependentLossEntry 2 }
polarizationDependentLossMin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { polarizationDependentLossEntry 3 }
polarizationDependentLossMax OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { polarizationDependentLossEntry 4 }
inOpticalFrequency OBJECT IDENTIFIER ::= { common 31 }
inOpticalFrequencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF InOpticalFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for RX optical frequency, corresponding to pm parameter OFT"
::= { inOpticalFrequency 1 }
inOpticalFrequencyEntry OBJECT-TYPE
SYNTAX InOpticalFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inOpticalFrequencyTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { inOpticalFrequencyTable 1 }
InOpticalFrequencyEntry ::=
SEQUENCE {
inOpticalFrequencyInstant Unsigned32,
inOpticalFrequencyAvg Unsigned32,
inOpticalFrequencyMin Unsigned32,
inOpticalFrequencyMax Unsigned32
}
inOpticalFrequencyInstant OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:MHz
"
::= { inOpticalFrequencyEntry 1 }
inOpticalFrequencyAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:MHz
"
::= { inOpticalFrequencyEntry 2 }
inOpticalFrequencyMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:MHz
"
::= { inOpticalFrequencyEntry 3 }
inOpticalFrequencyMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:MHz
"
::= { inOpticalFrequencyEntry 4 }
outOpticalFrequency OBJECT IDENTIFIER ::= { common 32 }
outOpticalFrequencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOpticalFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for TX optical frequency, corresponding to pm parameter OFR"
::= { outOpticalFrequency 1 }
outOpticalFrequencyEntry OBJECT-TYPE
SYNTAX OutOpticalFrequencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outOpticalFrequencyTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { outOpticalFrequencyTable 1 }
OutOpticalFrequencyEntry ::=
SEQUENCE {
outOpticalFrequencyInstant Unsigned32,
outOpticalFrequencyAvg Unsigned32,
outOpticalFrequencyMin Unsigned32,
outOpticalFrequencyMax Unsigned32
}
outOpticalFrequencyInstant OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:MHz
"
::= { outOpticalFrequencyEntry 1 }
outOpticalFrequencyAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:MHz
"
::= { outOpticalFrequencyEntry 2 }
outOpticalFrequencyMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:MHz
"
::= { outOpticalFrequencyEntry 3 }
outOpticalFrequencyMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:MHz
"
::= { outOpticalFrequencyEntry 4 }
inOpticalPowerLaneHigh OBJECT IDENTIFIER ::= { common 33 }
inOpticalPowerLaneHighTable OBJECT-TYPE
SYNTAX SEQUENCE OF InOpticalPowerLaneHighEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power, corresponding to pm parameter OPR-lane-high"
::= { inOpticalPowerLaneHigh 1 }
inOpticalPowerLaneHighEntry OBJECT-TYPE
SYNTAX InOpticalPowerLaneHighEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inOpticalPowerLaneHighTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { inOpticalPowerLaneHighTable 1 }
InOpticalPowerLaneHighEntry ::=
SEQUENCE {
inOpticalPowerLaneHighInstant CoriantTypesOpticalPower,
inOpticalPowerLaneHighAvg CoriantTypesOpticalPower,
inOpticalPowerLaneHighMin CoriantTypesOpticalPower,
inOpticalPowerLaneHighMax CoriantTypesOpticalPower
}
inOpticalPowerLaneHighInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inOpticalPowerLaneHighEntry 1 }
inOpticalPowerLaneHighAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inOpticalPowerLaneHighEntry 2 }
inOpticalPowerLaneHighMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inOpticalPowerLaneHighEntry 3 }
inOpticalPowerLaneHighMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inOpticalPowerLaneHighEntry 4 }
inOpticalPowerLaneLow OBJECT IDENTIFIER ::= { common 34 }
inOpticalPowerLaneLowTable OBJECT-TYPE
SYNTAX SEQUENCE OF InOpticalPowerLaneLowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power, corresponding to pm parameter OPR-lane-low"
::= { inOpticalPowerLaneLow 1 }
inOpticalPowerLaneLowEntry OBJECT-TYPE
SYNTAX InOpticalPowerLaneLowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inOpticalPowerLaneLowTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { inOpticalPowerLaneLowTable 1 }
InOpticalPowerLaneLowEntry ::=
SEQUENCE {
inOpticalPowerLaneLowInstant CoriantTypesOpticalPower,
inOpticalPowerLaneLowAvg CoriantTypesOpticalPower,
inOpticalPowerLaneLowMin CoriantTypesOpticalPower,
inOpticalPowerLaneLowMax CoriantTypesOpticalPower
}
inOpticalPowerLaneLowInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inOpticalPowerLaneLowEntry 1 }
inOpticalPowerLaneLowAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inOpticalPowerLaneLowEntry 2 }
inOpticalPowerLaneLowMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inOpticalPowerLaneLowEntry 3 }
inOpticalPowerLaneLowMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inOpticalPowerLaneLowEntry 4 }
inOpticalPowerLaneTotal OBJECT IDENTIFIER ::= { common 35 }
inOpticalPowerLaneTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF InOpticalPowerLaneTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for total value of RX lane optical power, corresponding to pm parameter OPR-lane-total"
::= { inOpticalPowerLaneTotal 1 }
inOpticalPowerLaneTotalEntry OBJECT-TYPE
SYNTAX InOpticalPowerLaneTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inOpticalPowerLaneTotalTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { inOpticalPowerLaneTotalTable 1 }
InOpticalPowerLaneTotalEntry ::=
SEQUENCE {
inOpticalPowerLaneTotalInstant CoriantTypesOpticalPower,
inOpticalPowerLaneTotalAvg CoriantTypesOpticalPower,
inOpticalPowerLaneTotalMin CoriantTypesOpticalPower,
inOpticalPowerLaneTotalMax CoriantTypesOpticalPower
}
inOpticalPowerLaneTotalInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inOpticalPowerLaneTotalEntry 1 }
inOpticalPowerLaneTotalAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inOpticalPowerLaneTotalEntry 2 }
inOpticalPowerLaneTotalMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inOpticalPowerLaneTotalEntry 3 }
inOpticalPowerLaneTotalMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inOpticalPowerLaneTotalEntry 4 }
outOpticalPowerLaneHigh OBJECT IDENTIFIER ::= { common 36 }
outOpticalPowerLaneHighTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOpticalPowerLaneHighEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power, corresponding to pm parameter OPR-lane-high"
::= { outOpticalPowerLaneHigh 1 }
outOpticalPowerLaneHighEntry OBJECT-TYPE
SYNTAX OutOpticalPowerLaneHighEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outOpticalPowerLaneHighTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { outOpticalPowerLaneHighTable 1 }
OutOpticalPowerLaneHighEntry ::=
SEQUENCE {
outOpticalPowerLaneHighInstant CoriantTypesOpticalPower,
outOpticalPowerLaneHighAvg CoriantTypesOpticalPower,
outOpticalPowerLaneHighMin CoriantTypesOpticalPower,
outOpticalPowerLaneHighMax CoriantTypesOpticalPower
}
outOpticalPowerLaneHighInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outOpticalPowerLaneHighEntry 1 }
outOpticalPowerLaneHighAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outOpticalPowerLaneHighEntry 2 }
outOpticalPowerLaneHighMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outOpticalPowerLaneHighEntry 3 }
outOpticalPowerLaneHighMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outOpticalPowerLaneHighEntry 4 }
outOpticalPowerLaneLow OBJECT IDENTIFIER ::= { common 37 }
outOpticalPowerLaneLowTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOpticalPowerLaneLowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power, corresponding to pm parameter OPR-lane-low"
::= { outOpticalPowerLaneLow 1 }
outOpticalPowerLaneLowEntry OBJECT-TYPE
SYNTAX OutOpticalPowerLaneLowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outOpticalPowerLaneLowTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { outOpticalPowerLaneLowTable 1 }
OutOpticalPowerLaneLowEntry ::=
SEQUENCE {
outOpticalPowerLaneLowInstant CoriantTypesOpticalPower,
outOpticalPowerLaneLowAvg CoriantTypesOpticalPower,
outOpticalPowerLaneLowMin CoriantTypesOpticalPower,
outOpticalPowerLaneLowMax CoriantTypesOpticalPower
}
outOpticalPowerLaneLowInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outOpticalPowerLaneLowEntry 1 }
outOpticalPowerLaneLowAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outOpticalPowerLaneLowEntry 2 }
outOpticalPowerLaneLowMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outOpticalPowerLaneLowEntry 3 }
outOpticalPowerLaneLowMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outOpticalPowerLaneLowEntry 4 }
outOpticalPowerLaneTotal OBJECT IDENTIFIER ::= { common 38 }
outOpticalPowerLaneTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOpticalPowerLaneTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for total value of TX lane optical power, corresponding to pm parameter OPR-lane-total"
::= { outOpticalPowerLaneTotal 1 }
outOpticalPowerLaneTotalEntry OBJECT-TYPE
SYNTAX OutOpticalPowerLaneTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outOpticalPowerLaneTotalTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { outOpticalPowerLaneTotalTable 1 }
OutOpticalPowerLaneTotalEntry ::=
SEQUENCE {
outOpticalPowerLaneTotalInstant CoriantTypesOpticalPower,
outOpticalPowerLaneTotalAvg CoriantTypesOpticalPower,
outOpticalPowerLaneTotalMin CoriantTypesOpticalPower,
outOpticalPowerLaneTotalMax CoriantTypesOpticalPower
}
outOpticalPowerLaneTotalInstant OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outOpticalPowerLaneTotalEntry 1 }
outOpticalPowerLaneTotalAvg OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outOpticalPowerLaneTotalEntry 2 }
outOpticalPowerLaneTotalMin OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outOpticalPowerLaneTotalEntry 3 }
outOpticalPowerLaneTotalMax OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outOpticalPowerLaneTotalEntry 4 }
moduleTemperature OBJECT IDENTIFIER ::= { common 39 }
moduleTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF ModuleTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for module temperature, corresponding to pm parameter T-module"
::= { moduleTemperature 1 }
moduleTemperatureEntry OBJECT-TYPE
SYNTAX ModuleTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of moduleTemperatureTable"
INDEX { shelfId,slotId,subslotId }
::= { moduleTemperatureTable 1 }
ModuleTemperatureEntry ::=
SEQUENCE {
moduleTemperatureInstant CoriantTypesTemperaturePrecision3,
moduleTemperatureAvg CoriantTypesTemperaturePrecision3,
moduleTemperatureMin CoriantTypesTemperaturePrecision3,
moduleTemperatureMax CoriantTypesTemperaturePrecision3
}
moduleTemperatureInstant OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { moduleTemperatureEntry 1 }
moduleTemperatureAvg OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { moduleTemperatureEntry 2 }
moduleTemperatureMin OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { moduleTemperatureEntry 3 }
moduleTemperatureMax OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { moduleTemperatureEntry 4 }
inletTemperature OBJECT IDENTIFIER ::= { common 40 }
inletTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF InletTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for inlet temperature, corresponding to pm parameter T-inlet"
::= { inletTemperature 1 }
inletTemperatureEntry OBJECT-TYPE
SYNTAX InletTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of inletTemperatureTable"
INDEX { shelfId }
::= { inletTemperatureTable 1 }
InletTemperatureEntry ::=
SEQUENCE {
inletTemperatureInstant CoriantTypesTemperaturePrecision3,
inletTemperatureAvg CoriantTypesTemperaturePrecision3,
inletTemperatureMin CoriantTypesTemperaturePrecision3,
inletTemperatureMax CoriantTypesTemperaturePrecision3
}
inletTemperatureInstant OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { inletTemperatureEntry 1 }
inletTemperatureAvg OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { inletTemperatureEntry 2 }
inletTemperatureMin OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { inletTemperatureEntry 3 }
inletTemperatureMax OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { inletTemperatureEntry 4 }
outletTemperature OBJECT IDENTIFIER ::= { common 41 }
outletTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutletTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for outlet temperature, corresponding to pm parameter T-outlet"
::= { outletTemperature 1 }
outletTemperatureEntry OBJECT-TYPE
SYNTAX OutletTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of outletTemperatureTable"
INDEX { shelfId }
::= { outletTemperatureTable 1 }
OutletTemperatureEntry ::=
SEQUENCE {
outletTemperatureInstant CoriantTypesTemperaturePrecision3,
outletTemperatureAvg CoriantTypesTemperaturePrecision3,
outletTemperatureMin CoriantTypesTemperaturePrecision3,
outletTemperatureMax CoriantTypesTemperaturePrecision3
}
outletTemperatureInstant OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { outletTemperatureEntry 1 }
outletTemperatureAvg OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { outletTemperatureEntry 2 }
outletTemperatureMin OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { outletTemperatureEntry 3 }
outletTemperatureMax OBJECT-TYPE
SYNTAX CoriantTypesTemperaturePrecision3
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { outletTemperatureEntry 4 }
opticalReturnLoss OBJECT IDENTIFIER ::= { common 42 }
opticalReturnLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF OpticalReturnLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for return loss, corresponding to pm parameter ORL"
::= { opticalReturnLoss 1 }
opticalReturnLossEntry OBJECT-TYPE
SYNTAX OpticalReturnLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of opticalReturnLossTable"
INDEX { omsName }
::= { opticalReturnLossTable 1 }
OpticalReturnLossEntry ::=
SEQUENCE {
opticalReturnLossInstant CoriantTypesDBPrecision1,
opticalReturnLossAvg CoriantTypesDBPrecision1,
opticalReturnLossMin CoriantTypesDBPrecision1,
opticalReturnLossMax CoriantTypesDBPrecision1
}
opticalReturnLossInstant OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
"
::= { opticalReturnLossEntry 1 }
opticalReturnLossAvg OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
"
::= { opticalReturnLossEntry 2 }
opticalReturnLossMin OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
"
::= { opticalReturnLossEntry 3 }
opticalReturnLossMax OBJECT-TYPE
SYNTAX CoriantTypesDBPrecision1
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
"
::= { opticalReturnLossEntry 4 }
sopChangeRate OBJECT IDENTIFIER ::= { common 43 }
sopChangeRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SopChangeRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "statistics value: average, minimum, maximum and instant value for SOP change rate, corresponding to pm parameter SOP"
::= { sopChangeRate 1 }
sopChangeRateEntry OBJECT-TYPE
SYNTAX SopChangeRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sopChangeRateTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { sopChangeRateTable 1 }
SopChangeRateEntry ::=
SEQUENCE {
sopChangeRateInstant Unsigned32,
sopChangeRateAvg Unsigned32,
sopChangeRateMin Unsigned32,
sopChangeRateMax Unsigned32
}
sopChangeRateInstant OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the instant value of statistics counter
UNITS:rads/s
"
::= { sopChangeRateEntry 1 }
sopChangeRateAvg OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the average value of statistics counter
UNITS:rads/s
"
::= { sopChangeRateEntry 2 }
sopChangeRateMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the minimum value of statistics counter
UNITS:rads/s
"
::= { sopChangeRateEntry 3 }
sopChangeRateMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the maximum value of statistics counter
UNITS:rads/s
"
::= { sopChangeRateEntry 4 }
hmoOcmPort OBJECT IDENTIFIER ::= { groove 15 }
rawData OBJECT IDENTIFIER ::= { hmoOcmPort 1 }
rawDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF RawDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains ocm raw measure data."
::= { rawData 1 }
rawDataEntry OBJECT-TYPE
SYNTAX RawDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rawDataTable"
INDEX { shelfId,slotId,subslotId,portId }
::= { rawDataTable 1 }
RawDataEntry ::=
SEQUENCE {
rawDataRefreshCounter Unsigned32,
rawDataValidNum Unsigned32
}
rawDataRefreshCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "count the ocm-raw-data refreshed times.
default value :0"
::= { rawDataEntry 1 }
rawDataValidNum OBJECT-TYPE
SYNTAX Unsigned32 (0..136)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of valid ocm-raw-data list. Example, if this values is 10, means only the key index-id 0..9 is valid.
default value :0"
::= { rawDataEntry 2 }
rawDataList OBJECT IDENTIFIER ::= { hmoOcmPort 2 }
rawDataListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RawDataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Kinds of raw measure data reported from ocm."
::= { rawDataList 1 }
rawDataListEntry OBJECT-TYPE
SYNTAX RawDataListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rawDataListTable"
INDEX { shelfId,slotId,subslotId,portId,rawDataListIndexId }
::= { rawDataListTable 1 }
RawDataListEntry ::=
SEQUENCE {
rawDataListIndexId Unsigned32,
rawDataListOchId Unsigned32,
rawDataListNmcId Unsigned32,
rawDataListActualOpticalPower CoriantTypesOpticalPower,
rawDataListChannelFrequency Unsigned32,
rawDataListActualChannelFrequency Unsigned32,
rawDataListActualChannelWidth Unsigned32,
rawDataListActualChannelRange Unsigned32,
rawDataListActualChannelOsnr CoriantTypesOpticalDB,
rawDataListHighPowerAttenuation CoriantTypesDecimalFract2,
rawDataListHighPowerStatus INTEGER
}
rawDataListIndexId OBJECT-TYPE
SYNTAX Unsigned32 (0..135)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integer ID of the ocm-raw-data.
"
::= { rawDataListEntry 1 }
rawDataListOchId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Use target frequency as och id, the id is defined to uniquely identify the och optical interface.
"
::= { rawDataListEntry 2 }
rawDataListNmcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The id is defined to uniquely identify the nmc optical interface.
"
::= { rawDataListEntry 3 }
rawDataListActualOpticalPower OBJECT-TYPE
SYNTAX CoriantTypesOpticalPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual optical power.
"
::= { rawDataListEntry 4 }
rawDataListChannelFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channel center frequency.
UNITS:MHz
"
::= { rawDataListEntry 5 }
rawDataListActualChannelFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual channel center frequency.
UNITS:MHz
"
::= { rawDataListEntry 6 }
rawDataListActualChannelWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual channel width with unit MHz.
UNITS:MHz
"
::= { rawDataListEntry 7 }
rawDataListActualChannelRange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual channel range.
"
::= { rawDataListEntry 8 }
rawDataListActualChannelOsnr OBJECT-TYPE
SYNTAX CoriantTypesOpticalDB
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Actual channel Optical Signal Noise Ratio.
"
::= { rawDataListEntry 9 }
rawDataListHighPowerAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the attenuation value for nmc high power
UNITS:dB
default value :99"
::= { rawDataListEntry 10 }
rawDataListHighPowerStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "nmc high power state
default value :99"
::= { rawDataListEntry 11 }
hmo OBJECT IDENTIFIER ::= { groove 16 }
wssActualVoa OBJECT IDENTIFIER ::= { hmo 2 }
wssActualVoaTable OBJECT-TYPE
SYNTAX SEQUENCE OF WssActualVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { wssActualVoa 1 }
wssActualVoaEntry OBJECT-TYPE
SYNTAX WssActualVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wssActualVoaTable"
INDEX { shelfId,slotId,subslotId }
::= { wssActualVoaTable 1 }
WssActualVoaEntry ::=
SEQUENCE {
wssActualVoaTriggerCounter Unsigned32,
wssActualVoaNmcTotalNumber Unsigned32,
wssActualVoaDirectionType INTEGER
}
wssActualVoaTriggerCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "used to trigger callback
default value :0"
::= { wssActualVoaEntry 1 }
wssActualVoaNmcTotalNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "used to record the total number of nmcs whose voa change
default value :0"
::= { wssActualVoaEntry 2 }
wssActualVoaDirectionType OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (0),
input (1),
output (2),
bidirection (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the direction of voa configure for nmc
default value :not-available"
::= { wssActualVoaEntry 3 }
nmcActualVoa OBJECT IDENTIFIER ::= { hmo 3 }
nmcActualVoaTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcActualVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Kinds of nmc voa reported from wss."
::= { nmcActualVoa 1 }
nmcActualVoaEntry OBJECT-TYPE
SYNTAX NmcActualVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcActualVoaTable"
INDEX { shelfId,slotId,subslotId,nmcTargetVoaNmcTmpId }
::= { nmcActualVoaTable 1 }
NmcActualVoaEntry ::=
SEQUENCE {
nmcActualVoaNmcTmpId Unsigned32,
nmcActualVoaNmcId Unsigned32,
nmcActualVoaInputAttenuation CoriantTypesDecimalFract2,
nmcActualVoaOutputAttenuation CoriantTypesDecimalFract2
}
nmcActualVoaNmcTmpId OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { nmcActualVoaEntry 1 }
nmcActualVoaNmcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "0
"
::= { nmcActualVoaEntry 2 }
nmcActualVoaInputAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc input direction
UNITS:dB
default value :0.0"
::= { nmcActualVoaEntry 3 }
nmcActualVoaOutputAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc output direction
UNITS:dB
default value :0.0"
::= { nmcActualVoaEntry 4 }
wssTargetVoa OBJECT IDENTIFIER ::= { hmo 4 }
wssTargetVoaTable OBJECT-TYPE
SYNTAX SEQUENCE OF WssTargetVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { wssTargetVoa 1 }
wssTargetVoaEntry OBJECT-TYPE
SYNTAX WssTargetVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of wssTargetVoaTable"
INDEX { shelfId,slotId,subslotId }
::= { wssTargetVoaTable 1 }
WssTargetVoaEntry ::=
SEQUENCE {
wssTargetVoaTriggerCounter Unsigned32,
wssTargetVoaNmcTotalNumber Unsigned32,
wssTargetVoaDirectionType INTEGER
}
wssTargetVoaTriggerCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "used to trigger callback
default value :0"
::= { wssTargetVoaEntry 1 }
wssTargetVoaNmcTotalNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "used to record the total number of nmcs whose voa change
default value :0"
::= { wssTargetVoaEntry 2 }
wssTargetVoaDirectionType OBJECT-TYPE
SYNTAX INTEGER {
notAvailable (0),
input (1),
output (2),
bidirection (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the direction of voa configure for nmc
default value :not-available"
::= { wssTargetVoaEntry 3 }
nmcTargetVoa OBJECT IDENTIFIER ::= { hmo 5 }
nmcTargetVoaTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcTargetVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Kinds of nmc voa reported from wss."
::= { nmcTargetVoa 1 }
nmcTargetVoaEntry OBJECT-TYPE
SYNTAX NmcTargetVoaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcTargetVoaTable"
INDEX { shelfId,slotId,subslotId,nmcTargetVoaNmcTmpId }
::= { nmcTargetVoaTable 1 }
NmcTargetVoaEntry ::=
SEQUENCE {
nmcTargetVoaNmcTmpId Unsigned32,
nmcTargetVoaNmcId Unsigned32,
nmcTargetVoaInputAttenuation CoriantTypesDecimalFract2,
nmcTargetVoaOutputAttenuation CoriantTypesDecimalFract2
}
nmcTargetVoaNmcTmpId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { nmcTargetVoaEntry 1 }
nmcTargetVoaNmcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "0
"
::= { nmcTargetVoaEntry 2 }
nmcTargetVoaInputAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc input direction
UNITS:dB
default value :0.0"
::= { nmcTargetVoaEntry 3 }
nmcTargetVoaOutputAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc output direction
UNITS:dB
default value :0.0"
::= { nmcTargetVoaEntry 4 }
nmcReference OBJECT IDENTIFIER ::= { hmo 6 }
nmcReferenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF NmcReferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Network Media Channel (NMC) MO"
::= { nmcReference 1 }
nmcReferenceEntry OBJECT-TYPE
SYNTAX NmcReferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of nmcReferenceTable"
INDEX { nmcReferenceId }
::= { nmcReferenceTable 1 }
NmcReferenceEntry ::=
SEQUENCE {
nmcReferenceId Unsigned32,
nmcReferenceOcmNmcSourceRefId Unsigned32
}
nmcReferenceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NULL
"
::= { nmcReferenceEntry 1 }
nmcReferenceOcmNmcSourceRefId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Record the nbi nmc ref id in the ocm nmc which used to mapping to NBI NMC.
"
::= { nmcReferenceEntry 2 }
ochReference OBJECT IDENTIFIER ::= { hmo 7 }
ochReferenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF OchReferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents the Optical Channel (OCH) MO"
::= { ochReference 1 }
ochReferenceEntry OBJECT-TYPE
SYNTAX OchReferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of ochReferenceTable"
INDEX { ochReferenceOchName }
::= { ochReferenceTable 1 }
OchReferenceEntry ::=
SEQUENCE {
ochReferenceOchName CoriantTypesNameIdentifier,
ochReferenceOchFrequency Unsigned32,
ochReferenceOchWidth OCTET STRING,
ochReferenceMaxAttenuation CoriantTypesDecimalFract2,
ochReferenceTargetAttenuation CoriantTypesDecimalFract2,
ochReferenceActualAttenuation CoriantTypesDecimalFract2
}
ochReferenceOchName OBJECT-TYPE
SYNTAX CoriantTypesNameIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name is defined to uniquely identify the och optical interface.
"
::= { ochReferenceEntry 1 }
ochReferenceOchFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0|191300000..196125000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Frequency of the channel with unit MHz.
UNITS:MHz
"
::= { ochReferenceEntry 2 }
ochReferenceOchWidth OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Wavelength of the channel with unit nm.
UNITS:nm
"
::= { ochReferenceEntry 3 }
ochReferenceMaxAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc input direction
UNITS:dB
default value :0.0"
::= { ochReferenceEntry 4 }
ochReferenceTargetAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc input direction
UNITS:dB
default value :0.0"
::= { ochReferenceEntry 5 }
ochReferenceActualAttenuation OBJECT-TYPE
SYNTAX CoriantTypesDecimalFract2
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the voa value for nmc input direction
UNITS:dB
default value :0.0"
::= { ochReferenceEntry 6 }
telemetry OBJECT IDENTIFIER ::= { groove 19 }
sensorGroup OBJECT IDENTIFIER ::= { telemetry 3 }
sensorGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SensorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of telemetry sensory groups on the local
system, where a sensor grouping represents a resuable
grouping of multiple paths and exclude filters."
::= { sensorGroup 1 }
sensorGroupEntry OBJECT-TYPE
SYNTAX SensorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sensorGroupTable"
INDEX { sensorGroupId }
::= { sensorGroupTable 1 }
SensorGroupEntry ::=
SEQUENCE {
sensorGroupId OCTET STRING
}
sensorGroupId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name or identifier for the sensor group itself.
Will be referenced by other configuration specifying a
sensor group
"
::= { sensorGroupEntry 1 }
sensorPath OBJECT IDENTIFIER ::= { telemetry 5 }
sensorPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF SensorPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of paths in the model which together
comprise a sensor grouping. Filters for each path
to exclude items are also provided."
::= { sensorPath 1 }
sensorPathEntry OBJECT-TYPE
SYNTAX SensorPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sensorPathTable"
INDEX { sensorGroupId,sensorPathIndex }
::= { sensorPathTable 1 }
SensorPathEntry ::=
SEQUENCE {
sensorPathIndex OCTET STRING,
sensorPathModelPath OCTET STRING,
sensorPathExcludeFilter OCTET STRING
}
sensorPathIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..320))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "index for sensor-path
"
::= { sensorPathEntry 1 }
sensorPathModelPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path to a section of operational state of interest
(the sensor).
"
::= { sensorPathEntry 2 }
sensorPathExcludeFilter OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Filter to exclude certain values out of the state
values
"
::= { sensorPathEntry 3 }
destinationGroup OBJECT IDENTIFIER ::= { telemetry 7 }
destinationGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DestinationGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of destination-groups. Destination groups allow the
reuse of common telemetry destinations across the
telemetry configuration. An operator references a
set of destinations via the configurable
destination-group-identifier.
A destination group may contain one or more telemetry
destinations"
::= { destinationGroup 1 }
destinationGroupEntry OBJECT-TYPE
SYNTAX DestinationGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of destinationGroupTable"
INDEX { destinationGroupGroupId }
::= { destinationGroupTable 1 }
DestinationGroupEntry ::=
SEQUENCE {
destinationGroupGroupId OCTET STRING
}
destinationGroupGroupId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique identifier for the destination group
"
::= { destinationGroupEntry 1 }
destination OBJECT IDENTIFIER ::= { telemetry 9 }
destinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF DestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of telemetry stream destinations"
::= { destination 1 }
destinationEntry OBJECT-TYPE
SYNTAX DestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of destinationTable"
INDEX { destinationGroupGroupId,destinationAddress,destinationPort }
::= { destinationTable 1 }
DestinationEntry ::=
SEQUENCE {
destinationAddress IetfInetTypesIpAddress,
destinationPort IetfInetTypesPortNumber
}
destinationAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the telemetry stream destination
"
::= { destinationEntry 1 }
destinationPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protocol (udp or tcp) port number for the telemetry
stream destination
"
::= { destinationEntry 2 }
dialOutSubscription OBJECT IDENTIFIER ::= { telemetry 12 }
dialOutSubscriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DialOutSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of telemetry subscriptions. A telemetry
subscription consists of a set of collection
destinations, stream attributes, and associated paths to
state information in the model (sensor data)"
::= { dialOutSubscription 1 }
dialOutSubscriptionEntry OBJECT-TYPE
SYNTAX DialOutSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of dialOutSubscriptionTable"
INDEX { dialOutSubscriptionSubscriptionName }
::= { dialOutSubscriptionTable 1 }
DialOutSubscriptionEntry ::=
SEQUENCE {
dialOutSubscriptionStartStreamingTime IetfYangTypesDateAndTime,
dialOutSubscriptionStreamingDataModel INTEGER,
dialOutSubscriptionSubscriptionName OCTET STRING,
dialOutSubscriptionSubscriptionId OCTET STRING,
dialOutSubscriptionLocalSourceAddress OCTET STRING,
dialOutSubscriptionOriginatedQosMarking IetfInetTypesDscp,
dialOutSubscriptionProtocol INTEGER,
dialOutSubscriptionEncoding INTEGER
}
dialOutSubscriptionStartStreamingTime OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of the subscription first streaming data packet send out.
If the time is default value the packet will send immediately after subscription setting completed.
If the time is passed the packet will send out at the next integral multiple of sample interval since the start-streaming-time.
If the time is not yet the first packet will be sent out at the start-streaming-time
default value :0000-01-01T00:00:00.000Z"
::= { dialOutSubscriptionEntry 1 }
dialOutSubscriptionStreamingDataModel OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
deviceModel (2),
openconfig (3),
openroadm (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stream out data based on selected model
default value :Device-model"
::= { dialOutSubscriptionEntry 2 }
dialOutSubscriptionSubscriptionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User configured identifier of the telemetry
subscription. This value is used primarily for
subscriptions configured locally on the network
element.
"
::= { dialOutSubscriptionEntry 3 }
dialOutSubscriptionSubscriptionId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System generated identifer of the telemetry
subscription.
"
::= { dialOutSubscriptionEntry 4 }
dialOutSubscriptionLocalSourceAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address which will be the source of packets from
the device to a telemetry collector destination.
default value :auto"
::= { dialOutSubscriptionEntry 5 }
dialOutSubscriptionOriginatedQosMarking OBJECT-TYPE
SYNTAX IetfInetTypesDscp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP marking of packets generated by the telemetry
subsystem on the network device.
default value :0"
::= { dialOutSubscriptionEntry 6 }
dialOutSubscriptionProtocol OBJECT-TYPE
SYNTAX INTEGER {
ssh (1),
grpc (2),
jsonRpc (3),
websocketRpc (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection of the transport protocol for the telemetry
stream.
default value :GRPC"
::= { dialOutSubscriptionEntry 7 }
dialOutSubscriptionEncoding OBJECT-TYPE
SYNTAX INTEGER {
xml (1),
jsonIetf (2),
proto3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection of the specific encoding or RPC framework
for telemetry messages to and from the network element.
default value :JSON_IETF"
::= { dialOutSubscriptionEntry 8 }
sensorProfile OBJECT IDENTIFIER ::= { telemetry 14 }
sensorProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SensorProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of telemetry sensor groups used
in the subscription"
::= { sensorProfile 1 }
sensorProfileEntry OBJECT-TYPE
SYNTAX SensorProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of sensorProfileTable"
INDEX { dialOutSubscriptionSubscriptionName }
::= { sensorProfileTable 1 }
SensorProfileEntry ::=
SEQUENCE {
sensorProfileSensorGroup RowPointer,
sensorProfileSampleInterval OCTET STRING,
sensorProfileHeartbeatInterval OCTET STRING,
sensorProfileSuppressRedundant TruthValue
}
sensorProfileSensorGroup OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference to the sensor group which is used in the profile
"
::= { sensorProfileEntry 1 }
sensorProfileSampleInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in milliseconds between the device's sample of a
telemetry data source. For example, setting this to 2000
would require the local device to collect the telemetry
data every 2000 milliseconds. There can be latency or jitter
in transmitting the data, but the sample must occur at
the specified interval.
The timestamp must reflect the actual time when the data
was sampled, not simply the previous sample timestamp +
sample-interval.
If sample-interval is set to 0, the telemetry sensor
becomes event based. The sensor must then emit data upon
every change of the underlying data source.
UNITS:millisecond
default value :10000"
::= { sensorProfileEntry 2 }
sensorProfileHeartbeatInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum time interval in milliseconds that may pass
between updates from a device to a telemetry collector.
If this interval expires, but there is no updated data to
send (such as if suppress_updates has been configured), the
device must send a telemetry message to the collector.
UNITS:millisecond
default value :20000"
::= { sensorProfileEntry 3 }
sensorProfileSuppressRedundant OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boolean flag to control suppression of redundant
telemetry updates to the collector platform. If this flag is
set to TRUE, then the collector will only send an update at
the configured interval if a subscribed data value has
changed. Otherwise, the device will not send an update to
the collector until expiration of the heartbeat interval.
default value :true"
::= { sensorProfileEntry 4 }
destinationProfile OBJECT IDENTIFIER ::= { telemetry 16 }
destinationProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF DestinationProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifier of the previously defined destination
group"
::= { destinationProfile 1 }
destinationProfileEntry OBJECT-TYPE
SYNTAX DestinationProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of destinationProfileTable"
INDEX { dialOutSubscriptionSubscriptionName,destinationProfileGroupId }
::= { destinationProfileTable 1 }
DestinationProfileEntry ::=
SEQUENCE {
destinationProfileGroupId RowPointer
}
destinationProfileGroupId OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination group id references a reusable
group of destination addresses and ports for
the telemetry stream.
"
::= { destinationProfileEntry 1 }
dialInSubscription OBJECT IDENTIFIER ::= { telemetry 18 }
dialInSubscriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DialInSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List representation of telemetry subscriptions that
are configured via an inline RPC, otherwise known
as dynamic telemetry subscriptions."
::= { dialInSubscription 1 }
dialInSubscriptionEntry OBJECT-TYPE
SYNTAX DialInSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of dialInSubscriptionTable"
INDEX { dialInSubscriptionSubscriptionId }
::= { dialInSubscriptionTable 1 }
DialInSubscriptionEntry ::=
SEQUENCE {
dialInSubscriptionSubscriptionId OCTET STRING
}
dialInSubscriptionSubscriptionId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference to the identifier of the subscription
itself. The id will be the handle to refer to the
subscription once created
"
::= { dialInSubscriptionEntry 1 }
stateDialInSubscription OBJECT IDENTIFIER ::= { telemetry 19 }
stateDialInSubscriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF StateDialInSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "State information relating to dynamic telemetry
subscriptions."
::= { stateDialInSubscription 1 }
stateDialInSubscriptionEntry OBJECT-TYPE
SYNTAX StateDialInSubscriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of stateDialInSubscriptionTable"
INDEX { dialInSubscriptionSubscriptionId }
::= { stateDialInSubscriptionTable 1 }
StateDialInSubscriptionEntry ::=
SEQUENCE {
stateDialInSubscriptionSubscriptionId OCTET STRING,
stateDialInSubscriptionDestinationAddress IetfInetTypesIpAddress,
stateDialInSubscriptionDestinationPort IetfInetTypesPortNumber,
stateDialInSubscriptionSampleInterval OCTET STRING,
stateDialInSubscriptionHeartbeatInterval OCTET STRING,
stateDialInSubscriptionSuppressRedundant TruthValue,
stateDialInSubscriptionProtocol INTEGER,
stateDialInSubscriptionEncoding INTEGER
}
stateDialInSubscriptionSubscriptionId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "System generated identifer of the telemetry
subscription.
"
::= { stateDialInSubscriptionEntry 1 }
stateDialInSubscriptionDestinationAddress OBJECT-TYPE
SYNTAX IetfInetTypesIpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the telemetry stream destination
"
::= { stateDialInSubscriptionEntry 2 }
stateDialInSubscriptionDestinationPort OBJECT-TYPE
SYNTAX IetfInetTypesPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protocol (udp or tcp) port number for the telemetry
stream destination
"
::= { stateDialInSubscriptionEntry 3 }
stateDialInSubscriptionSampleInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time in milliseconds between the device's sample of a
telemetry data source. For example, setting this to 2000
would require the local device to collect the telemetry
data every 2000 milliseconds. There can be latency or jitter
in transmitting the data, but the sample must occur at
the specified interval.
The timestamp must reflect the actual time when the data
was sampled, not simply the previous sample timestamp +
sample-interval.
If sample-interval is set to 0, the telemetry sensor
becomes event based. The sensor must then emit data upon
every change of the underlying data source.
UNITS:millisecond
default value :10000"
::= { stateDialInSubscriptionEntry 4 }
stateDialInSubscriptionHeartbeatInterval OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum time interval in milliseconds that may pass
between updates from a device to a telemetry collector.
If this interval expires, but there is no updated data to
send (such as if suppress_updates has been configured), the
device must send a telemetry message to the collector.
UNITS:millisecond
default value :20000"
::= { stateDialInSubscriptionEntry 5 }
stateDialInSubscriptionSuppressRedundant OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boolean flag to control suppression of redundant
telemetry updates to the collector platform. If this flag is
set to TRUE, then the collector will only send an update at
the configured interval if a subscribed data value has
changed. Otherwise, the device will not send an update to
the collector until expiration of the heartbeat interval.
default value :true"
::= { stateDialInSubscriptionEntry 6 }
stateDialInSubscriptionProtocol OBJECT-TYPE
SYNTAX INTEGER {
ssh (1),
grpc (2),
jsonRpc (3),
websocketRpc (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection of the transport protocol for the telemetry
stream.
default value :GRPC"
::= { stateDialInSubscriptionEntry 7 }
stateDialInSubscriptionEncoding OBJECT-TYPE
SYNTAX INTEGER {
xml (1),
jsonIetf (2),
proto3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection of the specific encoding or RPC framework
for telemetry messages to and from the network element.
default value :JSON_IETF"
::= { stateDialInSubscriptionEntry 8 }
dialInSensorPath OBJECT IDENTIFIER ::= { telemetry 21 }
dialInSensorPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF DialInSensorPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of paths in the model which together
comprise a sensor grouping. Filters for each path
to exclude items are also provided."
::= { dialInSensorPath 1 }
dialInSensorPathEntry OBJECT-TYPE
SYNTAX DialInSensorPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of dialInSensorPathTable"
INDEX { dialInSubscriptionSubscriptionId,dialInSensorPathPath }
::= { dialInSensorPathTable 1 }
DialInSensorPathEntry ::=
SEQUENCE {
dialInSensorPathPath OCTET STRING
}
dialInSensorPathPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..320))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference to the path of interest
"
::= { dialInSensorPathEntry 1 }
pathState OBJECT IDENTIFIER ::= { telemetry 22 }
pathStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF PathStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "State information for a dynamic subscription
paths of interest"
::= { pathState 1 }
pathStateEntry OBJECT-TYPE
SYNTAX PathStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of pathStateTable"
INDEX { dialInSubscriptionSubscriptionId,dialInSensorPathPath }
::= { pathStateTable 1 }
PathStateEntry ::=
SEQUENCE {
pathStateModelPath OCTET STRING,
pathStateExcludeFilter OCTET STRING
}
pathStateModelPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path to a section of operational state of interest
(the sensor).
"
::= { pathStateEntry 1 }
pathStateExcludeFilter OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Filter to exclude certain values out of the state
values
"
::= { pathStateEntry 2 }
service OBJECT IDENTIFIER ::= { groove 20 }
rstpBridgeInstance OBJECT IDENTIFIER ::= { service 2 }
rstpBridgeInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RstpBridgeInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "rstp bridge instance, max instance = 4"
::= { rstpBridgeInstance 1 }
rstpBridgeInstanceEntry OBJECT-TYPE
SYNTAX RstpBridgeInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rstpBridgeInstanceTable"
INDEX { rstpBridgeInstanceBridgeName }
::= { rstpBridgeInstanceTable 1 }
RstpBridgeInstanceEntry ::=
SEQUENCE {
rstpBridgeInstanceBridgeName OCTET STRING
}
rstpBridgeInstanceBridgeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "unique name of the bridge
"
::= { rstpBridgeInstanceEntry 1 }
rstpConfig OBJECT IDENTIFIER ::= { service 3 }
rstpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RstpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Collection of rstp configuration attributes"
::= { rstpConfig 1 }
rstpConfigEntry OBJECT-TYPE
SYNTAX RstpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rstpConfigTable"
INDEX { rstpBridgeInstanceBridgeName }
::= { rstpConfigTable 1 }
RstpConfigEntry ::=
SEQUENCE {
rstpConfigBridgePriority Unsigned32,
rstpConfigShutdown TruthValue,
rstpConfigHoldTime Unsigned32,
rstpConfigHelloTime Unsigned32,
rstpConfigMaxAge Unsigned32,
rstpConfigForwardDelay Unsigned32,
rstpConfigTransmitHoldCount Unsigned32
}
rstpConfigBridgePriority OBJECT-TYPE
SYNTAX Unsigned32 (0..61440)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bridge Priority Value
default value :32768"
::= { rstpConfigEntry 1 }
rstpConfigShutdown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bridge admin state
default value :false"
::= { rstpConfigEntry 2 }
rstpConfigHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time interval during which no more than two
BPDUs transmitted by this node in seconds - not used in rstp mode (in seconds)
default value :2"
::= { rstpConfigEntry 3 }
rstpConfigHelloTime OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time between the transmission of BPDU's by this node on any
port, when role is root (in seconds)
default value :2"
::= { rstpConfigEntry 4 }
rstpConfigMaxAge OBJECT-TYPE
SYNTAX Unsigned32 (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value that all bridges use for MaxAge when this bridge
is acting as the root
default value :20"
::= { rstpConfigEntry 5 }
rstpConfigForwardDelay OBJECT-TYPE
SYNTAX Unsigned32 (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port on the Switch spends this time in the listening
state while moving from the blocking state to the forwarding state (in seconds)
default value :15"
::= { rstpConfigEntry 6 }
rstpConfigTransmitHoldCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum BPDU transmission rate
default value :2"
::= { rstpConfigEntry 7 }
rstpBridgePortTBL OBJECT IDENTIFIER ::= { service 4 }
rstpBridgePortTBLTable OBJECT-TYPE
SYNTAX SEQUENCE OF RstpBridgePortTBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table contains port-specific information for rstp config"
::= { rstpBridgePortTBL 1 }
rstpBridgePortTBLEntry OBJECT-TYPE
SYNTAX RstpBridgePortTBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rstpBridgePortTBLTable"
INDEX { rstpBridgeInstanceBridgeName,rstpBridgePortTBLIfname }
::= { rstpBridgePortTBLTable 1 }
RstpBridgePortTBLEntry ::=
SEQUENCE {
rstpBridgePortTBLIfname RowPointer,
rstpBridgePortTBLCost Unsigned32,
rstpBridgePortTBLPriority Unsigned32
}
rstpBridgePortTBLIfname OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface name of the port
"
::= { rstpBridgePortTBLEntry 1 }
rstpBridgePortTBLCost OBJECT-TYPE
SYNTAX Unsigned32 (2000..200000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The contribution of this port to the path cost of
paths towards the spanning tree root which include this port also
default value :20000"
::= { rstpBridgePortTBLEntry 2 }
rstpBridgePortTBLPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of the priority field
default value :128"
::= { rstpBridgePortTBLEntry 3 }
rstpBridgeAttr OBJECT IDENTIFIER ::= { service 6 }
rstpBridgeAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RstpBridgeAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Collection of operational rstp bridge attributes"
::= { rstpBridgeAttr 1 }
rstpBridgeAttrEntry OBJECT-TYPE
SYNTAX RstpBridgeAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rstpBridgeAttrTable"
INDEX { rstpBridgeInstanceBridgeName }
::= { rstpBridgeAttrTable 1 }
RstpBridgeAttrEntry ::=
SEQUENCE {
rstpBridgeAttrRootBridgePort Unsigned32,
rstpBridgeAttrRootPathCost Unsigned32,
rstpBridgeAttrRootBridgePriority Unsigned32,
rstpBridgeAttrRootBridgeId RstpBridgeIdType,
rstpBridgeAttrRootHoldTime Unsigned32,
rstpBridgeAttrRootHelloTime Unsigned32,
rstpBridgeAttrRootMaxAge Unsigned32,
rstpBridgeAttrRootForwardDelay Unsigned32,
rstpBridgeAttrBridgeId RstpBridgeIdType,
rstpBridgeAttrTopoChangeCount Unsigned32,
rstpBridgeAttrTimeSinceTopoChange Unsigned32
}
rstpBridgeAttrRootBridgePort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port id of the root port
"
::= { rstpBridgeAttrEntry 1 }
rstpBridgeAttrRootPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as
seen from this bridge
"
::= { rstpBridgeAttrEntry 2 }
rstpBridgeAttrRootBridgePriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Root Bridge Priority Value
"
::= { rstpBridgeAttrEntry 3 }
rstpBridgeAttrRootBridgeId OBJECT-TYPE
SYNTAX RstpBridgeIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Root Bridge identifier
"
::= { rstpBridgeAttrEntry 4 }
rstpBridgeAttrRootHoldTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time interval during which no more than two
BPDUs transmitted by this node in seconds at root node (in seconds)
UNITS:seconds
"
::= { rstpBridgeAttrEntry 5 }
rstpBridgeAttrRootHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time between the transmission of BPDU's used at root node (in seconds)
"
::= { rstpBridgeAttrEntry 6 }
rstpBridgeAttrRootMaxAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value that all bridges use for MaxAge used at root node
UNITS:seconds
"
::= { rstpBridgeAttrEntry 7 }
rstpBridgeAttrRootForwardDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time in seconds spent on the listening state used at root node (in seconds)
UNITS:seconds
"
::= { rstpBridgeAttrEntry 8 }
rstpBridgeAttrBridgeId OBJECT-TYPE
SYNTAX RstpBridgeIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bridge identifier of the bridge
"
::= { rstpBridgeAttrEntry 9 }
rstpBridgeAttrTopoChangeCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes
"
::= { rstpBridgeAttrEntry 10 }
rstpBridgeAttrTimeSinceTopoChange OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time since last topology changes occurred (in seconds)
"
::= { rstpBridgeAttrEntry 11 }
rstpBridgePortStateTBL OBJECT IDENTIFIER ::= { service 8 }
rstpBridgePortStateTBLTable OBJECT-TYPE
SYNTAX SEQUENCE OF RstpBridgePortStateTBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains port-specific information for rstp state attributes"
::= { rstpBridgePortStateTBL 1 }
rstpBridgePortStateTBLEntry OBJECT-TYPE
SYNTAX RstpBridgePortStateTBLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rstpBridgePortStateTBLTable"
INDEX { rstpBridgeInstanceBridgeName,rstpBridgePortStateTBLIfname }
::= { rstpBridgePortStateTBLTable 1 }
RstpBridgePortStateTBLEntry ::=
SEQUENCE {
rstpBridgePortStateTBLIfname RowPointer,
rstpBridgePortStateTBLBridgePortState INTEGER,
rstpBridgePortStateTBLBridgePortRole INTEGER,
rstpBridgePortStateTBLBridgePortId Unsigned32,
rstpBridgePortStateTBLOperEdgeBridgePort TruthValue,
rstpBridgePortStateTBLDesignatedBridgePort Unsigned32,
rstpBridgePortStateTBLDesignatedBridgeid RstpBridgeIdType
}
rstpBridgePortStateTBLIfname OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface name of the port
"
::= { rstpBridgePortStateTBLEntry 1 }
rstpBridgePortStateTBLBridgePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding (1),
blocked (2),
learning (3),
forwarding (4),
unknown (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state
default value :unknown"
::= { rstpBridgePortStateTBLEntry 2 }
rstpBridgePortStateTBLBridgePortRole OBJECT-TYPE
SYNTAX INTEGER {
designated (1),
root (2),
alternate (3),
disabled (4),
backup (5),
unknown (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role payed by this port in the bridge
default value :unknown"
::= { rstpBridgePortStateTBLEntry 3 }
rstpBridgePortStateTBLBridgePortId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unique port id of this port
"
::= { rstpBridgePortStateTBLEntry 4 }
rstpBridgePortStateTBLOperEdgeBridgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational value of the Edge Port parameter
"
::= { rstpBridgePortStateTBLEntry 5 }
rstpBridgePortStateTBLDesignatedBridgePort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port id of the designated port
"
::= { rstpBridgePortStateTBLEntry 6 }
rstpBridgePortStateTBLDesignatedBridgeid OBJECT-TYPE
SYNTAX RstpBridgeIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Bridge Identifier of the bridge that this port considers
to be the Designated Bridge for this port's segment
"
::= { rstpBridgePortStateTBLEntry 7 }
hmoStatistics OBJECT IDENTIFIER ::= { groove 21 }
hmoStatisticsSubcard OBJECT IDENTIFIER ::= { hmoStatistics 1 }
hmoStatisticsSubcardTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsSubcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsSubcard 1 }
hmoStatisticsSubcardEntry OBJECT-TYPE
SYNTAX HmoStatisticsSubcardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsSubcardTable"
INDEX { shelfId,slotId,subslotId }
::= { hmoStatisticsSubcardTable 1 }
HmoStatisticsSubcardEntry ::=
SEQUENCE {
hmoStatisticsSubcardLastClear IetfYangTypesDateAndTime
}
hmoStatisticsSubcardLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsSubcardEntry 1 }
hmoStatisticsCard OBJECT IDENTIFIER ::= { hmoStatistics 2 }
hmoStatisticsCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsCard 1 }
hmoStatisticsCardEntry OBJECT-TYPE
SYNTAX HmoStatisticsCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsCardTable"
INDEX { shelfId,slotId }
::= { hmoStatisticsCardTable 1 }
HmoStatisticsCardEntry ::=
SEQUENCE {
hmoStatisticsCardLastClear IetfYangTypesDateAndTime
}
hmoStatisticsCardLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsCardEntry 1 }
hmoStatisticsShelf OBJECT IDENTIFIER ::= { hmoStatistics 3 }
hmoStatisticsShelfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsShelf 1 }
hmoStatisticsShelfEntry OBJECT-TYPE
SYNTAX HmoStatisticsShelfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsShelfTable"
INDEX { shelfId }
::= { hmoStatisticsShelfTable 1 }
HmoStatisticsShelfEntry ::=
SEQUENCE {
hmoStatisticsShelfLastClear IetfYangTypesDateAndTime
}
hmoStatisticsShelfLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsShelfEntry 1 }
hmoStatisticsOts OBJECT IDENTIFIER ::= { hmoStatistics 4 }
hmoStatisticsOtsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsOtsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsOts 1 }
hmoStatisticsOtsEntry OBJECT-TYPE
SYNTAX HmoStatisticsOtsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsOtsTable"
INDEX { otsName }
::= { hmoStatisticsOtsTable 1 }
HmoStatisticsOtsEntry ::=
SEQUENCE {
hmoStatisticsOtsLastClear IetfYangTypesDateAndTime
}
hmoStatisticsOtsLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsOtsEntry 1 }
hmoStatisticsOms OBJECT IDENTIFIER ::= { hmoStatistics 5 }
hmoStatisticsOmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsOmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsOms 1 }
hmoStatisticsOmsEntry OBJECT-TYPE
SYNTAX HmoStatisticsOmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsOmsTable"
INDEX { omsName }
::= { hmoStatisticsOmsTable 1 }
HmoStatisticsOmsEntry ::=
SEQUENCE {
hmoStatisticsOmsLastClear IetfYangTypesDateAndTime
}
hmoStatisticsOmsLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsOmsEntry 1 }
hmoStatisticsOsc OBJECT IDENTIFIER ::= { hmoStatistics 6 }
hmoStatisticsOscTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsOscEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsOsc 1 }
hmoStatisticsOscEntry OBJECT-TYPE
SYNTAX HmoStatisticsOscEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsOscTable"
INDEX { oscName }
::= { hmoStatisticsOscTable 1 }
HmoStatisticsOscEntry ::=
SEQUENCE {
hmoStatisticsOscLastClear IetfYangTypesDateAndTime
}
hmoStatisticsOscLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsOscEntry 1 }
hmoStatisticsGopt OBJECT IDENTIFIER ::= { hmoStatistics 7 }
hmoStatisticsGoptTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsGoptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsGopt 1 }
hmoStatisticsGoptEntry OBJECT-TYPE
SYNTAX HmoStatisticsGoptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsGoptTable"
INDEX { goptName }
::= { hmoStatisticsGoptTable 1 }
HmoStatisticsGoptEntry ::=
SEQUENCE {
hmoStatisticsGoptLastClear IetfYangTypesDateAndTime,
hmoStatisticsGoptProtectionSwitchDuration OCTET STRING,
hmoStatisticsGoptProtectionSwitchCount OCTET STRING,
hmoStatisticsGoptLossTx OCTET STRING,
hmoStatisticsGoptLossRx OCTET STRING
}
hmoStatisticsGoptLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsGoptEntry 1 }
hmoStatisticsGoptProtectionSwitchDuration OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protection Switch Duration, corresponding to pm parameter PSD
UNITS:seconds
"
::= { hmoStatisticsGoptEntry 2 }
hmoStatisticsGoptProtectionSwitchCount OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protection Switch Count, corresponding to pm parameter PSC
UNITS:times
"
::= { hmoStatisticsGoptEntry 3 }
hmoStatisticsGoptLossTx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX
UNITS:seconds
"
::= { hmoStatisticsGoptEntry 4 }
hmoStatisticsGoptLossRx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Receive side, corresponding to pm parameter LOSS-RX
UNITS:seconds
"
::= { hmoStatisticsGoptEntry 5 }
hmoStatisticsNmc OBJECT IDENTIFIER ::= { hmoStatistics 8 }
hmoStatisticsNmcTable OBJECT-TYPE
SYNTAX SEQUENCE OF HmoStatisticsNmcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NULL"
::= { hmoStatisticsNmc 1 }
hmoStatisticsNmcEntry OBJECT-TYPE
SYNTAX HmoStatisticsNmcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of hmoStatisticsNmcTable"
INDEX { nmcName }
::= { hmoStatisticsNmcTable 1 }
HmoStatisticsNmcEntry ::=
SEQUENCE {
hmoStatisticsNmcLastClear IetfYangTypesDateAndTime,
hmoStatisticsNmcLossTx OCTET STRING
}
hmoStatisticsNmcLastClear OBJECT-TYPE
SYNTAX IetfYangTypesDateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of statistics monitor
default value :0000-01-01T00:00:00.000Z"
::= { hmoStatisticsNmcEntry 1 }
hmoStatisticsNmcLossTx OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX
UNITS:seconds
"
::= { hmoStatisticsNmcEntry 2 }
END