CISCOSB-OPC-MIB DEFINITIONS ::= BEGIN -- Date: 10 JAN 2024 IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB switch001 FROM CISCOSB-MIB; rlOpc MODULE-IDENTITY LAST-UPDATED "202401100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for CISCOSB OPC (On-board Packet Capture) feature" REVISION "202401100000Z" DESCRIPTION "Initial revision." ::= { switch001 248 } rlOpcCapturePointTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOpcCapturePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with Capture point configuration entries" ::= {rlOpc 1} rlOpcCapturePointEntry OBJECT-TYPE SYNTAX RlOpcCapturePointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table, listing the Capture Point entries" INDEX { rlOpcName} ::= { rlOpcCapturePointTable 1 } RlOpcCapturePointEntry::=SEQUENCE { rlOpcName DisplayString, rlOpcBufferType INTEGER, rlOpcBufferSize Unsigned32, rlOpcBufferUsed Unsigned32, rlOpcBufferPacketNum Unsigned32, rlOpcBufferPacketsDropped Unsigned32, rlOpcBufferPacketsPerSecond Unsigned32, rlOpcFilterType INTEGER, rlOpcFilterAclName DisplayString, rlOpcLimitDuration Unsigned32, rlOpcLimitNumOfPackets Unsigned32, rlOpcLimitMaxPacketLen Unsigned32, rlOpcState INTEGER, rlOpcCapturePointRowStatus RowStatus } rlOpcName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the Capture Point. Key to the table" ::= { rlOpcCapturePointEntry 1 } rlOpcBufferType OBJECT-TYPE SYNTAX INTEGER { linear(1), circular(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Capture point Buffer Type" DEFVAL { 1 } ::= { rlOpcCapturePointEntry 2 } rlOpcBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Capture point buffer size in MB" ::= { rlOpcCapturePointEntry 3 } rlOpcBufferUsed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size within the buffer that is actually used. The size will be indicated in increments of 128 KB" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 4 } rlOpcBufferPacketNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of captured packets in the buffer" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 5 } rlOpcBufferPacketsDropped OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 6 } rlOpcBufferPacketsPerSecond OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet capture rate. Number of packets being captured per second. Zero if capture point is not active" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 7 } rlOpcFilterType OBJECT-TYPE SYNTAX INTEGER { match-none(0), match-any(1), match-access-list(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of packet capture filter to be applied for capture point" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 8 } rlOpcFilterAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "ACL as capture filter. Set only if rlOpcFilterType is match_access_list ACL must already exist. Length of the string is same as rlQosAclName MIB" ::= { rlOpcCapturePointEntry 9 } rlOpcLimitDuration OBJECT-TYPE SYNTAX Unsigned32(0..1000000) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit capture by duration, zero if no limit is set" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 10 } rlOpcLimitNumOfPackets OBJECT-TYPE SYNTAX Unsigned32(0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Limit capture by number of packets, zero if no limit is set" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 11 } rlOpcLimitMaxPacketLen OBJECT-TYPE SYNTAX Unsigned32(64..9500 | 0) MAX-ACCESS read-write STATUS current DESCRIPTION "Limit capture by maximum packet length, zero if no limit is set" DEFVAL { 0 } ::= { rlOpcCapturePointEntry 12 } rlOpcState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operating state of the capture point" ::= { rlOpcCapturePointEntry 13 } rlOpcCapturePointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the entry. It's used to add/delete the entries" ::= { rlOpcCapturePointEntry 14 } rlOpcInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOpcInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with capture filter for the capture point" ::= {rlOpc 2} rlOpcInterfaceEntry OBJECT-TYPE SYNTAX RlOpcInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table, listing the Capture Point buffer entries" INDEX { rlOpcInterfaceCaptureName, rlOpcInterfaceIfIndex } ::= { rlOpcInterfaceTable 1 } RlOpcInterfaceEntry::=SEQUENCE { rlOpcInterfaceCaptureName DisplayString, rlOpcInterfaceIfIndex InterfaceIndexOrZero, rlOpcInterfaceCaptureDirection INTEGER, rlOpcInterfaceRowStatus RowStatus } rlOpcInterfaceCaptureName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the Capture Point. Key to the table" ::= { rlOpcInterfaceEntry 1 } rlOpcInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "IfIndex of the capture point filter source Control plane ifindex is 2147483646" ::= { rlOpcInterfaceEntry 2 } rlOpcInterfaceCaptureDirection OBJECT-TYPE SYNTAX INTEGER { none(0), in(1), out(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Capture direction, indicates which direction of traffic to capture on the interface" DEFVAL { 0 } ::= { rlOpcInterfaceEntry 3 } rlOpcInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the entry. It's used to add/delete the entries" ::= { rlOpcInterfaceEntry 4 } rlOpcActionTable OBJECT-TYPE SYNTAX SEQUENCE OF RlOpcActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table with capture point action" ::= {rlOpc 3} rlOpcActionEntry OBJECT-TYPE SYNTAX RlOpcActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table, listing the Capture Point buffer entries" INDEX { rlOpcActionCaptureName } ::= { rlOpcActionTable 1 } RlOpcActionEntry::=SEQUENCE { rlOpcActionCaptureName DisplayString, rlOpcExportDestLocationType INTEGER, rlOpcExportFileName OCTET STRING, rlOpcAction INTEGER, rlOpcActionRowStatus RowStatus } rlOpcActionCaptureName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the Capture Point. Key to the table" ::= { rlOpcActionEntry 1 } rlOpcExportDestLocationType OBJECT-TYPE SYNTAX INTEGER { flash(0), usb(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Capture export file destination" DEFVAL { 0 } ::= { rlOpcActionEntry 2 } rlOpcExportFileName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the export file" DEFVAL { "" } ::= { rlOpcActionEntry 3 } rlOpcAction OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), export(3), clear(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Start, stop a capture or export it to a pcap file" ::= { rlOpcActionEntry 4 } rlOpcActionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the entry. It's used to add/delete the entries" ::= { rlOpcActionEntry 5 } rlOpcCrashExportDestination OBJECT-TYPE SYNTAX INTEGER { flash(0), usb(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set export destination during system crash before reboot" DEFVAL { 0 } ::= { rlOpc 5 } rlOpcOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Global operating state, indicates if any of capture points are active" ::= { rlOpc 6 } END