-- ***************************************************************** -- structure.my -- -- Copyright (c) 2005-2006, 2018 by cisco Systems Inc. -- All rights reserved. -- -- ***************************************************************** -- -- This MIB implements two tables. The first table is for -- status and control of OOB Narrowband Digital Forward (NDF) -- channels and second table is for status and control of the -- OOB Narrowband Digital Return (NDR) channels for -- Cisco RPHY architecture. RPHY-NDF-NDR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, MacAddress FROM SNMPv2-TC InetAddress FROM INET-ADDRESS-MIB ciscoMgmt FROM CISCO-SMI; rphyNdfNdrMIB MODULE-IDENTITY LAST-UPDATED "201809250000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-@cisco.com" DESCRIPTION "description" REVISION "201809180000Z" DESCRIPTION "Latest version of this MIB module." ::= { ciscoMgmt 857 } -- Textual Conventions definition will be defined before this line rphyNdfNdrMIBNotifs OBJECT IDENTIFIER ::= { rphyNdfNdrMIB 0 } rphyNdfNdrMIBObjects OBJECT IDENTIFIER ::= { rphyNdfNdrMIB 1 } rphyNdfNdrMIBConform OBJECT IDENTIFIER ::= { rphyNdfNdrMIB 2 } docsRphyRpdDevNdfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyRpdDevNdfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides OOB NDF channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDF channel's admin status." ::= { rphyNdfNdrMIBObjects 1 } docsRphyRpdDevNdfCfgEntry OBJECT-TYPE SYNTAX DocsRphyRpdDevNdfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains status and configuration information for a single NDF Channel." INDEX { docsRphyRpdDevNdfUniqueId, docsRphyRpdDevNdfRfPort, docsRphyRpdDevNdfRfChannel } ::= { docsRphyRpdDevNdfCfgTable 1 } DocsRphyRpdDevNdfCfgEntry ::= SEQUENCE { docsRphyRpdDevNdfUniqueId MacAddress, docsRphyRpdDevNdfRfPort Unsigned32, docsRphyRpdDevNdfRfChannel Unsigned32, docsRphyRpdDevNdfEnable TruthValue, docsRphyRpdDevNdfDstIPAddr InetAddress, docsRphyRpdDevNdfSrcIPAddr InetAddress, docsRphyRpdDevNdfSessionId Unsigned32, docsRphyRpdDevNdfFrequency Unsigned32, docsRphyRpdDevNdfBandwidth Unsigned32, docsRphyRpdDevNdfPowerAdjust Integer32, docsRphyRpdDevNdfRfMute TruthValue, docsRphyRpdDevNdfIsUnicast TruthValue, docsRphyRpdDevNdfRpdStatus OCTET STRING, docsRphyRpdDevNdfRpdInPktCount Counter64, docsRphyRpdDevNdfRpdOutPktCount Counter64 } docsRphyRpdDevNdfUniqueId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN." ::= { docsRphyRpdDevNdfCfgEntry 1 } docsRphyRpdDevNdfRfPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute reports the RPD RF port number carrying this NDF channel." DEFVAL { "" } ::= { docsRphyRpdDevNdfCfgEntry 2 } docsRphyRpdDevNdfRfChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute reports the NDF channel number." DEFVAL { "" } ::= { docsRphyRpdDevNdfCfgEntry 3 } docsRphyRpdDevNdfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether the NDF stream is enabled or disabled. Also, using this attribute NDF stream can be enabled or disabled." ::= { docsRphyRpdDevNdfCfgEntry 4 } docsRphyRpdDevNdfDstIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the Group IP address of the RPD multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream." ::= { docsRphyRpdDevNdfCfgEntry 5 } docsRphyRpdDevNdfSrcIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the IP address of the transmitter of the L2TP stream." ::= { docsRphyRpdDevNdfCfgEntry 6 } docsRphyRpdDevNdfSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the L2TP session ID of the NDF stream." DEFVAL { 0 } ::= { docsRphyRpdDevNdfCfgEntry 7 } docsRphyRpdDevNdfFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hertz" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the center frequency of the NDF channel." DEFVAL { 0 } ::= { docsRphyRpdDevNdfCfgEntry 8 } docsRphyRpdDevNdfBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hertz" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the bandwidth of the NDF channel. Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz, Mode 7 : 25600000Hz." DEFVAL { "" } ::= { docsRphyRpdDevNdfCfgEntry 9 } docsRphyRpdDevNdfPowerAdjust OBJECT-TYPE SYNTAX Integer32 UNITS "TenthdB" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies power level adjustment for the NDF channel relative to the base power level configured for the DS RF port." DEFVAL { 0 } ::= { docsRphyRpdDevNdfCfgEntry 10 } docsRphyRpdDevNdfRfMute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current state of the RF output of the NDF channel. When Rf-mute is set to TRUE, the output RF signal is off. Similarly, when Rf-mute is set to FALSE, the output RF signal is active." ::= { docsRphyRpdDevNdfCfgEntry 11 } docsRphyRpdDevNdfIsUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates whether the NDF stream is unicast or multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream." ::= { docsRphyRpdDevNdfCfgEntry 12 } docsRphyRpdDevNdfRpdStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'." ::= { docsRphyRpdDevNdfCfgEntry 13 } docsRphyRpdDevNdfRpdInPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of packets received by the RPD on a given NDF stream. RPD status should be 'Online' to get the actual input packets count." ::= { docsRphyRpdDevNdfCfgEntry 14 } docsRphyRpdDevNdfRpdOutPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count." ::= { docsRphyRpdDevNdfCfgEntry 15 } docsRphyRpdDevNdrCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsRphyRpdDevNdrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides OOB NDR channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDR channel's admin status." ::= { rphyNdfNdrMIBObjects 2 } docsRphyRpdDevNdrCfgEntry OBJECT-TYPE SYNTAX DocsRphyRpdDevNdrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains status and configuration information for a single NDR Channel." INDEX { docsRphyRpdDevNdrUniqueId, docsRphyRpdDevNdrRfPort, docsRphyRpdDevNdrRfChannel } ::= { docsRphyRpdDevNdrCfgTable 1 } DocsRphyRpdDevNdrCfgEntry ::= SEQUENCE { docsRphyRpdDevNdrUniqueId MacAddress, docsRphyRpdDevNdrRfPort Unsigned32, docsRphyRpdDevNdrRfChannel Unsigned32, docsRphyRpdDevNdrEnable TruthValue, docsRphyRpdDevNdrDstIPAddr InetAddress, docsRphyRpdDevNdrSrcIPAddr InetAddress, docsRphyRpdDevNdrSessionId Unsigned32, docsRphyRpdDevNdrFrequency Unsigned32, docsRphyRpdDevNdrBandwidth Unsigned32, docsRphyRpdDevNdrMtuSize Unsigned32, docsRphyRpdDevNdrPhb Unsigned32, docsRphyRpdDevNdrPowerAdjust Integer32, docsRphyRpdDevNdrRpdStatus OCTET STRING, docsRphyRpdDevNdrRpdInPktCount Counter64, docsRphyRpdDevNdrRpdOutPktCount Counter64 } docsRphyRpdDevNdrUniqueId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN." ::= { docsRphyRpdDevNdrCfgEntry 1 } docsRphyRpdDevNdrRfPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute reports the RPD RF port number" ::= { docsRphyRpdDevNdrCfgEntry 2 } docsRphyRpdDevNdrRfChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key attribute reports the NDR channel number." ::= { docsRphyRpdDevNdrCfgEntry 3 } docsRphyRpdDevNdrEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates whether the NDR stream is enabled or disabled. Also, using this attribute NDR stream can be enabled or disabled." ::= { docsRphyRpdDevNdrCfgEntry 4 } docsRphyRpdDevNdrDstIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the IP address of the receiver of the NDR L2TP stream." ::= { docsRphyRpdDevNdrCfgEntry 5 } docsRphyRpdDevNdrSrcIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the IP address of the RPD transmitting the L2TP stream." ::= { docsRphyRpdDevNdrCfgEntry 6 } docsRphyRpdDevNdrSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the L2TP session ID of the NDR stream." ::= { docsRphyRpdDevNdrCfgEntry 7 } docsRphyRpdDevNdrFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hertz" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the center frequency of the NDR channel." DEFVAL { 0 } ::= { docsRphyRpdDevNdrCfgEntry 8 } docsRphyRpdDevNdrBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "Hertz" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the bandwidth of the NDR channel.Channel widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz." DEFVAL { "" } ::= { docsRphyRpdDevNdrCfgEntry 9 } docsRphyRpdDevNdrMtuSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the Maximum Transmission Unit or maximum packet size for the L2TP stream." ::= { docsRphyRpdDevNdrCfgEntry 10 } docsRphyRpdDevNdrPhb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the DSCP QOS value configured for a L2TP packets. Default PHB is 0x0 means Best-Effort packet delivery." DEFVAL { 0 } ::= { docsRphyRpdDevNdrCfgEntry 11 } docsRphyRpdDevNdrPowerAdjust OBJECT-TYPE SYNTAX Integer32 UNITS "TenthdBmV" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB]." ::= { docsRphyRpdDevNdrCfgEntry 12 } docsRphyRpdDevNdrRpdStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'." ::= { docsRphyRpdDevNdrCfgEntry 13 } docsRphyRpdDevNdrRpdInPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of packets received by the RPD on a given NDR stream. RPD status should be 'Online' to get the actual input packets count." ::= { docsRphyRpdDevNdrCfgEntry 14 } docsRphyRpdDevNdrRpdOutPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count." ::= { docsRphyRpdDevNdrCfgEntry 15 } -- Default Notification Type rphyNdfNdrMIBEventName NOTIFICATION-TYPE STATUS current DESCRIPTION "Test Notifiation Type" ::= { rphyNdfNdrMIBNotifs 1 } rphyNdfNdrMIBCompliances OBJECT IDENTIFIER ::= { rphyNdfNdrMIBConform 1 } rphyNdfNdrMIBGroups OBJECT IDENTIFIER ::= { rphyNdfNdrMIBConform 2 } rphyNdfNdrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "This is a default module-compliance containing default object groups." MODULE -- this module MANDATORY-GROUPS { rphyNdfNdrMIBMainObjectGroup, rphyNdfNdrMIBNotificationGroup } ::= { rphyNdfNdrMIBCompliances 1 } -- Units of Conformance rphyNdfNdrMIBMainObjectGroup OBJECT-GROUP OBJECTS { docsRphyRpdDevNdfEnable, docsRphyRpdDevNdfDstIPAddr, docsRphyRpdDevNdfSrcIPAddr, docsRphyRpdDevNdfSessionId, docsRphyRpdDevNdfFrequency, docsRphyRpdDevNdfBandwidth, docsRphyRpdDevNdfPowerAdjust, docsRphyRpdDevNdfRfMute, docsRphyRpdDevNdfIsUnicast, docsRphyRpdDevNdfRpdStatus, docsRphyRpdDevNdfRpdInPktCount, docsRphyRpdDevNdfRpdOutPktCount, docsRphyRpdDevNdrEnable, docsRphyRpdDevNdrDstIPAddr, docsRphyRpdDevNdrSrcIPAddr, docsRphyRpdDevNdrSessionId, docsRphyRpdDevNdrFrequency, docsRphyRpdDevNdrBandwidth, docsRphyRpdDevNdrMtuSize, docsRphyRpdDevNdrPhb, docsRphyRpdDevNdrPowerAdjust, docsRphyRpdDevNdrRpdStatus, docsRphyRpdDevNdrRpdInPktCount, docsRphyRpdDevNdrRpdOutPktCount } STATUS current DESCRIPTION "The is a test group." ::= { rphyNdfNdrMIBGroups 1 } rphyNdfNdrMIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { rphyNdfNdrMIBEventName } STATUS current DESCRIPTION "The is a test group." ::= { rphyNdfNdrMIBGroups 2 } END