-- ***************************************************************** -- OLD-CISCO-ENV-MIB.my: Cisco Environmental Monitor MIB file -- -- May 1994, Jeffrey T. Johnson -- -- Copyright (c) 1994 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- OLD-CISCO-ENV-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB local FROM CISCO-SMI; lenv OBJECT IDENTIFIER ::= { local 1 } -- lenv is the same as lsystem -- we're just placing the envmon stuff under a new name for mibcomp envPresent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support" ::= { lenv 77 } envTestPt1Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 1. Typically ambient air or the temperature of air entering the router" ::= { lenv 78 } envTestPt1Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 1. Typically a temperature in centigrade." ::= { lenv 79 } envTestPt2Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 2. Typically airflow or the temperature of air leaving the router" ::= { lenv 80 } envTestPt2Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 2. Typically a temperature in centigrade." ::= { lenv 81 } envTestPt3Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 3. Typically +5 volt" ::= { lenv 82 } envTestPt3Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 3. Typically the value in millivolts of the +5v supply" ::= { lenv 83 } envTestPt4Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 4. Typically +12 volt" ::= { lenv 84 } envTestPt4Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 4. Typically the value in millivolts of the +12v supply" ::= { lenv 85 } envTestPt5Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 5. Typically -12 volt" ::= { lenv 86 } envTestPt5Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 5. Typically the value in millivolts of the -12v supply" ::= { lenv 87 } envTestPt6Descr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of the test point 6. Typically -5 volt" ::= { lenv 88 } envTestPt6Measure OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of test point 6. Typically the value in millivolts of the -5v supply" ::= { lenv 89 } envTestPt1MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43)" ::= { lenv 90 } envTestPt2MarginVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58)" ::= { lenv 91 } envTestPt3MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt" ::= { lenv 92 } envTestPt4MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt" ::= { lenv 93 } envTestPt5MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt" ::= { lenv 94 } envTestPt6MarginPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "+/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt" ::= { lenv 95 } envTestPt1last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt1 when last shutdown occurred." ::= { lenv 96 } envTestPt2last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt2 when last shutdown occurred." ::= { lenv 97 } envTestPt3last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt3 when last shutdown occurred." ::= { lenv 98 } envTestPt4last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt4 when last shutdown occurred." ::= { lenv 99 } envTestPt5last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt5 when last shutdown occurred." ::= { lenv 100 } envTestPt6last OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value of TestPt6 when last shutdown occurred." ::= { lenv 101 } envTestPt1warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 102 } envTestPt2warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 103 } envTestPt3warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 104 } envTestPt4warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 105 } envTestPt5warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 106 } envTestPt6warn OBJECT-TYPE SYNTAX INTEGER { warning(1), noWarning(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Is this test point at a warning level?" ::= { lenv 107 } envFirmVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Description of Environmental Card firmware" ::= { lenv 108 } envTechnicianID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Technician ID" ::= { lenv 109 } envType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The type of environmental card" ::= { lenv 110 } envBurnDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The calibration / burn in date" ::= { lenv 111 } envSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Serial Number of environmental monitor card" ::= { lenv 112 } END