-- *****************************************************************
-- SYSLOG-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-SYSLOG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    ME1200DisplayString FROM ME1200-TC
    ME1200InetAddress FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    DateAndTime FROM SNMPv2-TC
    TruthValue FROM SNMPv2-TC
    ;

me1200SyslogMib MODULE-IDENTITY
    LAST-UPDATED "201403250000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        " "
    DESCRIPTION
        "This is a private MIB for Syslog"
    REVISION    "201403250000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 37 }


ME1200SyslogLevelType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The syslog severity level."
    SYNTAX      INTEGER { error(3), warning(4), notice(5), informational(6), all(8) }

me1200SyslogMibObjects OBJECT IDENTIFIER
    ::= { me1200SyslogMib 1 }

me1200SyslogConfig OBJECT IDENTIFIER
    ::= { me1200SyslogMibObjects 2 }

me1200SyslogConfigServer OBJECT IDENTIFIER
    ::= { me1200SyslogConfig 1 }

me1200SyslogConfigServerMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Indicates the syslog server mode operation. When the mode operation is
         enabled, the syslog message will send out to syslog server."
    ::= { me1200SyslogConfigServer 1 }

me1200SyslogConfigServerAddress OBJECT-TYPE
    SYNTAX      ME1200InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The domain name of syslog server."
    ::= { me1200SyslogConfigServer 2 }

me1200SyslogConfigServerLevel OBJECT-TYPE
    SYNTAX      ME1200SyslogLevelType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Indicates what level of message will send to syslog server. For
         example, the error level will send the specific messages which severity
         code is less or equal than error(3), the warning level will send the
         specific messages which severity code is less or equal than warning(4),
         the notice level will send the specific messages which severity code is
         less or equal than notice(5), the informational level will send the
         specific messages which severity code is less or equal than
         informational(6) and the enumeration option of all(8) isn't used in
         this case."
    ::= { me1200SyslogConfigServer 3 }

me1200SyslogStatus OBJECT IDENTIFIER
    ::= { me1200SyslogMibObjects 3 }

me1200SyslogStatusHistoryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SyslogStatusHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The syslog history table."
    ::= { me1200SyslogStatus 1 }

me1200SyslogStatusHistoryEntry OBJECT-TYPE
    SYNTAX      ME1200SyslogStatusHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each row contains a set of parameters."
    INDEX       { me1200SyslogStatusHistorySwitchId, me1200SyslogStatusHistoryMsgId }
    ::= { me1200SyslogStatusHistoryTable 1 }

ME1200SyslogStatusHistoryEntry ::= SEQUENCE {
    me1200SyslogStatusHistorySwitchId     Integer32,
    me1200SyslogStatusHistoryMsgId    Integer32,
    me1200SyslogStatusHistoryMsgLevel     ME1200SyslogLevelType,
    me1200SyslogStatusHistoryMsgTimeStamp     DateAndTime,
    me1200SyslogStatusHistoryMsgText      ME1200DisplayString
}

me1200SyslogStatusHistorySwitchId OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of switch. For non-stackable switch, the valid value
         is limited to 1. "
    ::= { me1200SyslogStatusHistoryEntry 1 }

me1200SyslogStatusHistoryMsgId OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of Syslog message."
    ::= { me1200SyslogStatusHistoryEntry 2 }

me1200SyslogStatusHistoryMsgLevel OBJECT-TYPE
    SYNTAX      ME1200SyslogLevelType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The severity level of the system log message. Note that enumeration
         option of all(8) isn't used in this case."
    ::= { me1200SyslogStatusHistoryEntry 3 }

me1200SyslogStatusHistoryMsgTimeStamp OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The value of sysUpTime when this message was generated."
    ::= { me1200SyslogStatusHistoryEntry 4 }

me1200SyslogStatusHistoryMsgText OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The detailed context of the system log message."
    ::= { me1200SyslogStatusHistoryEntry 5 }

me1200SyslogControl OBJECT IDENTIFIER
    ::= { me1200SyslogMibObjects 4 }

me1200SyslogControlHistoryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SyslogControlHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The syslog history clear table."
    ::= { me1200SyslogControl 1 }

me1200SyslogControlHistoryEntry OBJECT-TYPE
    SYNTAX      ME1200SyslogControlHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each row contains a set of parameters."
    INDEX       { me1200SyslogControlHistorySwitchId, me1200SyslogControlHistoryClearLevel }
    ::= { me1200SyslogControlHistoryTable 1 }

ME1200SyslogControlHistoryEntry ::= SEQUENCE {
    me1200SyslogControlHistorySwitchId    Integer32,
    me1200SyslogControlHistoryClearLevel      ME1200SyslogLevelType,
    me1200SyslogControlHistoryClear   TruthValue
}

me1200SyslogControlHistorySwitchId OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of switch. For non-stackable switch, the valid value
         is limited to 1. For stackable switch, value 0 means the action is
         applied to all switches."
    ::= { me1200SyslogControlHistoryEntry 1 }

me1200SyslogControlHistoryClearLevel OBJECT-TYPE
    SYNTAX      ME1200SyslogLevelType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Indicates which level of message want to clear."
    ::= { me1200SyslogControlHistoryEntry 2 }

me1200SyslogControlHistoryClear OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Clear syslog history by setting to true."
    ::= { me1200SyslogControlHistoryEntry 3 }

me1200SyslogMibConformance OBJECT IDENTIFIER
    ::= { me1200SyslogMib 2 }

me1200SyslogMibCompliances OBJECT IDENTIFIER
    ::= { me1200SyslogMibConformance 1 }

me1200SyslogMibGroups OBJECT IDENTIFIER
    ::= { me1200SyslogMibConformance 2 }

me1200SyslogConfigServerInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SyslogConfigServerMode, me1200SyslogConfigServerAddress, 
                  me1200SyslogConfigServerLevel }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SyslogMibGroups 1 }

me1200SyslogStatusHistoryTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SyslogStatusHistoryMsgLevel, 
                  me1200SyslogStatusHistoryMsgTimeStamp, 
                  me1200SyslogStatusHistoryMsgText }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SyslogMibGroups 2 }

me1200SyslogControlHistoryTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SyslogControlHistoryClear }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SyslogMibGroups 3 }

me1200SyslogMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200SyslogConfigServerInfoGroup, 
                  me1200SyslogStatusHistoryTableInfoGroup, 
                  me1200SyslogControlHistoryTableInfoGroup }

    ::= { me1200SyslogMibCompliances 1 }

END