-- *****************************************************************
-- SYNCE-MIB:  ME1200 Private MIB
--
-- ****************************************************************

ME1200-SYNCE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    ME1200InterfaceIndex FROM ME1200-TC
    ME1200Unsigned8 FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    Unsigned32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200SynceMib MODULE-IDENTITY
    LAST-UPDATED "201605090000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "Private SyncE MIB."
    REVISION    "201605090000Z"
    DESCRIPTION
        "Added SyncE clock selector state change notification"
    REVISION    "201406240000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 42 }


ME1200synceAnegMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { none(0), preferedSlave(1), preferedMaster(2), forcedSlave(3) }

ME1200synceEecOption ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { eecOption1(0), eecOption2(1) }

ME1200synceFrequency ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { disabled(0), freq1544kHz(1), freq2048kHz(2), freq10MHz(3), freqMax(4) }

ME1200syncePtsfState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { none(0), unusable(1), lossSync(2), lossAnnounce(3) }

ME1200synceQualityLevel ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { qlNone(0), qlPrc(1), qlSsua(2), qlSsub(3), qlEec2(4), qlEec1(5), qlDnu(6), qlInv(7), qlFail(8), qlLink(9) }

ME1200synceSelectionMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { manual(0), manualToSelected(1), autoNonrevertive(2), autoRevertive(3), forcedHoldover(4), forcedFreeRun(5) }

ME1200synceSelectorState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "-"
    SYNTAX      INTEGER { locked(0), holdover(1), freerun(2), ptp(3), refFailed(4), acquiring(5) }

me1200SynceMibObjects OBJECT IDENTIFIER
    ::= { me1200SynceMib 1 }

me1200SynceCapabilities OBJECT IDENTIFIER
    ::= { me1200SynceMibObjects 1 }

me1200SynceCapabilitiesGlobal OBJECT IDENTIFIER
    ::= { me1200SynceCapabilities 1 }

me1200SynceCapabilitiesGlobalSourceCount OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The number of SyncE sources supported by the device."
    ::= { me1200SynceCapabilitiesGlobal 1 }

me1200SynceConfig OBJECT IDENTIFIER
    ::= { me1200SynceMibObjects 2 }

me1200SynceConfigGlobal OBJECT IDENTIFIER
    ::= { me1200SynceConfig 1 }

me1200SynceConfigGlobalClockSelectionMode OBJECT IDENTIFIER
    ::= { me1200SynceConfigGlobal 1 }

me1200SynceConfigGlobalClockSelectionModeSelectionMode OBJECT-TYPE
    SYNTAX      ME1200synceSelectionMode
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The selection mode."
    ::= { me1200SynceConfigGlobalClockSelectionMode 1 }

me1200SynceConfigGlobalClockSelectionModeSource OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Nominated source for manuel selection mode."
    ::= { me1200SynceConfigGlobalClockSelectionMode 2 }

me1200SynceConfigGlobalClockSelectionModeWtrTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "WTR timer value in minutes. Range is 0 to 12 minutes where 0 means that
         the timer is disabled."
    ::= { me1200SynceConfigGlobalClockSelectionMode 3 }

me1200SynceConfigGlobalClockSelectionModeSsmHoldover OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Tx overwrite SSM used when clock controller is hold over."
    ::= { me1200SynceConfigGlobalClockSelectionMode 4 }

me1200SynceConfigGlobalClockSelectionModeSsmFreerun OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Tx overwrite SSM used when clock controller is free run."
    ::= { me1200SynceConfigGlobalClockSelectionMode 5 }

me1200SynceConfigGlobalClockSelectionModeEecOption OBJECT-TYPE
    SYNTAX      ME1200synceEecOption
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Synchronous Ethernet Equipment Clock option."
    ::= { me1200SynceConfigGlobalClockSelectionMode 6 }

me1200SynceConfigGlobalStationClocks OBJECT IDENTIFIER
    ::= { me1200SynceConfigGlobal 2 }

me1200SynceConfigGlobalStationClocksStationClkOut OBJECT-TYPE
    SYNTAX      ME1200synceFrequency
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Station clock output frequency setting."
    ::= { me1200SynceConfigGlobalStationClocks 1 }

me1200SynceConfigGlobalStationClocksStationClkIn OBJECT-TYPE
    SYNTAX      ME1200synceFrequency
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Station clock input frequency setting."
    ::= { me1200SynceConfigGlobalStationClocks 2 }

me1200SynceConfigSources OBJECT IDENTIFIER
    ::= { me1200SynceConfig 2 }

me1200SynceConfigSourcesClockSourceNominationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceConfigSourcesClockSourceNominationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the SyncE source nomination configuration."
    ::= { me1200SynceConfigSources 1 }

me1200SynceConfigSourcesClockSourceNominationEntry OBJECT-TYPE
    SYNTAX      ME1200SynceConfigSourcesClockSourceNominationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The sourceId index must be a value from 0 up to the number of sources
         minus one."
    INDEX       { me1200SynceConfigSourcesClockSourceNominationSourceId }
    ::= { me1200SynceConfigSourcesClockSourceNominationTable 1 }

ME1200SynceConfigSourcesClockSourceNominationEntry ::= SEQUENCE {
    me1200SynceConfigSourcesClockSourceNominationSourceId     Integer32,
    me1200SynceConfigSourcesClockSourceNominationNominated    TruthValue,
    me1200SynceConfigSourcesClockSourceNominationNetworkPort      ME1200InterfaceIndex,
    me1200SynceConfigSourcesClockSourceNominationClkInPort    ME1200Unsigned8,
    me1200SynceConfigSourcesClockSourceNominationPriority     Unsigned32,
    me1200SynceConfigSourcesClockSourceNominationAnegMode     ME1200synceAnegMode,
    me1200SynceConfigSourcesClockSourceNominationSsmOverwrite     ME1200synceQualityLevel,
    me1200SynceConfigSourcesClockSourceNominationHoldoffTime      Unsigned32
}

me1200SynceConfigSourcesClockSourceNominationSourceId OBJECT-TYPE
    SYNTAX      Integer32 (0..32767)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 1 }

me1200SynceConfigSourcesClockSourceNominationNominated OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Indicates if source is nominated."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 2 }

me1200SynceConfigSourcesClockSourceNominationNetworkPort OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Interface index of the norminated source."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 3 }

me1200SynceConfigSourcesClockSourceNominationClkInPort OBJECT-TYPE
    SYNTAX      ME1200Unsigned8
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Clock input of the norminated source."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 4 }

me1200SynceConfigSourcesClockSourceNominationPriority OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Priority of the nominated source."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 5 }

me1200SynceConfigSourcesClockSourceNominationAnegMode OBJECT-TYPE
    SYNTAX      ME1200synceAnegMode
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Autonogotiation mode auto-master-slave."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 6 }

me1200SynceConfigSourcesClockSourceNominationSsmOverwrite OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "SSM overwrite quality."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 7 }

me1200SynceConfigSourcesClockSourceNominationHoldoffTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Hold Off timer value in 100ms (3 - 18). Zero means no hold off."
    ::= { me1200SynceConfigSourcesClockSourceNominationEntry 8 }

me1200SynceConfigPorts OBJECT IDENTIFIER
    ::= { me1200SynceConfig 3 }

me1200SynceConfigPortsPortConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceConfigPortsPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the SyncE port configuration."
    ::= { me1200SynceConfigPorts 1 }

me1200SynceConfigPortsPortConfigEntry OBJECT-TYPE
    SYNTAX      ME1200SynceConfigPortsPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The portId index must be a value from 0 up to the number of ports minus
         one."
    INDEX       { me1200SynceConfigPortsPortConfigPortId }
    ::= { me1200SynceConfigPortsPortConfigTable 1 }

ME1200SynceConfigPortsPortConfigEntry ::= SEQUENCE {
    me1200SynceConfigPortsPortConfigPortId    ME1200InterfaceIndex,
    me1200SynceConfigPortsPortConfigSsmEnabled    TruthValue
}

me1200SynceConfigPortsPortConfigPortId OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceConfigPortsPortConfigEntry 1 }

me1200SynceConfigPortsPortConfigSsmEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Quality level via SSM enabled."
    ::= { me1200SynceConfigPortsPortConfigEntry 2 }

me1200SynceStatus OBJECT IDENTIFIER
    ::= { me1200SynceMibObjects 3 }

me1200SynceStatusGlobal OBJECT IDENTIFIER
    ::= { me1200SynceStatus 1 }

me1200SynceStatusGlobalClockSelectionMode OBJECT IDENTIFIER
    ::= { me1200SynceStatusGlobal 1 }

me1200SynceStatusGlobalClockSelectionModeClockInput OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The clock source locked to when clock selector is in locked state."
    ::= { me1200SynceStatusGlobalClockSelectionMode 1 }

me1200SynceStatusGlobalClockSelectionModeSelectorState OBJECT-TYPE
    SYNTAX      ME1200synceSelectorState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is indicating the state of the clock selector."
    ::= { me1200SynceStatusGlobalClockSelectionMode 2 }

me1200SynceStatusGlobalClockSelectionModeLosx OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "LOSX"
    ::= { me1200SynceStatusGlobalClockSelectionMode 3 }

me1200SynceStatusGlobalClockSelectionModeLol OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Clock selector has raised the Los Of Lock alarm."
    ::= { me1200SynceStatusGlobalClockSelectionMode 4 }

me1200SynceStatusGlobalClockSelectionModeDhold OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Clock selector has not yet calculated the holdover frequency offset to
         local oscillator."
    ::= { me1200SynceStatusGlobalClockSelectionMode 5 }

me1200SynceStatusSources OBJECT IDENTIFIER
    ::= { me1200SynceStatus 2 }

me1200SynceStatusSourcesClockSourceNominationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceStatusSourcesClockSourceNominationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the clock source nomination status."
    ::= { me1200SynceStatusSources 1 }

me1200SynceStatusSourcesClockSourceNominationEntry OBJECT-TYPE
    SYNTAX      ME1200SynceStatusSourcesClockSourceNominationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The sourceId index must be a value must be a value from 0 up to the
         number of sources minus one."
    INDEX       { me1200SynceStatusSourcesClockSourceNominationSourceId }
    ::= { me1200SynceStatusSourcesClockSourceNominationTable 1 }

ME1200SynceStatusSourcesClockSourceNominationEntry ::= SEQUENCE {
    me1200SynceStatusSourcesClockSourceNominationSourceId     Integer32,
    me1200SynceStatusSourcesClockSourceNominationLocs     TruthValue,
    me1200SynceStatusSourcesClockSourceNominationFos      TruthValue,
    me1200SynceStatusSourcesClockSourceNominationSsm      TruthValue,
    me1200SynceStatusSourcesClockSourceNominationWtr      TruthValue
}

me1200SynceStatusSourcesClockSourceNominationSourceId OBJECT-TYPE
    SYNTAX      Integer32 (0..32767)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceStatusSourcesClockSourceNominationEntry 1 }

me1200SynceStatusSourcesClockSourceNominationLocs OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "LOCS"
    ::= { me1200SynceStatusSourcesClockSourceNominationEntry 2 }

me1200SynceStatusSourcesClockSourceNominationFos OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "FOS"
    ::= { me1200SynceStatusSourcesClockSourceNominationEntry 3 }

me1200SynceStatusSourcesClockSourceNominationSsm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "SSM"
    ::= { me1200SynceStatusSourcesClockSourceNominationEntry 4 }

me1200SynceStatusSourcesClockSourceNominationWtr OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "WTR"
    ::= { me1200SynceStatusSourcesClockSourceNominationEntry 5 }

me1200SynceStatusPorts OBJECT IDENTIFIER
    ::= { me1200SynceStatus 3 }

me1200SynceStatusPortsPortStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceStatusPortsPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the port status."
    ::= { me1200SynceStatusPorts 1 }

me1200SynceStatusPortsPortStatusEntry OBJECT-TYPE
    SYNTAX      ME1200SynceStatusPortsPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The portId index must be a value must be a value from 0 up to the
         number of ports minus one."
    INDEX       { me1200SynceStatusPortsPortStatusPortId }
    ::= { me1200SynceStatusPortsPortStatusTable 1 }

ME1200SynceStatusPortsPortStatusEntry ::= SEQUENCE {
    me1200SynceStatusPortsPortStatusPortId    ME1200InterfaceIndex,
    me1200SynceStatusPortsPortStatusSsmRx     ME1200synceQualityLevel,
    me1200SynceStatusPortsPortStatusSsmTx     ME1200synceQualityLevel,
    me1200SynceStatusPortsPortStatusMaster    TruthValue
}

me1200SynceStatusPortsPortStatusPortId OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceStatusPortsPortStatusEntry 1 }

me1200SynceStatusPortsPortStatusSsmRx OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Monitoring of the received SSM QL on this port."
    ::= { me1200SynceStatusPortsPortStatusEntry 2 }

me1200SynceStatusPortsPortStatusSsmTx OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Monitoring of the transmitted SSM QL on this port."
    ::= { me1200SynceStatusPortsPortStatusEntry 3 }

me1200SynceStatusPortsPortStatusMaster OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "If PHY is in 1000BaseT Mode then this is monitoring the master/slave
         mode."
    ::= { me1200SynceStatusPortsPortStatusEntry 4 }

me1200SynceStatusPtp OBJECT IDENTIFIER
    ::= { me1200SynceStatus 4 }

me1200SynceStatusPtpPortStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceStatusPtpPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the PTP port status."
    ::= { me1200SynceStatusPtp 1 }

me1200SynceStatusPtpPortStatusEntry OBJECT-TYPE
    SYNTAX      ME1200SynceStatusPtpPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The sourceId index must be a value must be a value from 0 up to the
         number of PTP sources minus one."
    INDEX       { me1200SynceStatusPtpPortStatusSourceId }
    ::= { me1200SynceStatusPtpPortStatusTable 1 }

ME1200SynceStatusPtpPortStatusEntry ::= SEQUENCE {
    me1200SynceStatusPtpPortStatusSourceId    Integer32,
    me1200SynceStatusPtpPortStatusSsmRx   ME1200synceQualityLevel,
    me1200SynceStatusPtpPortStatusPtsf    ME1200syncePtsfState
}

me1200SynceStatusPtpPortStatusSourceId OBJECT-TYPE
    SYNTAX      Integer32 (0..32767)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceStatusPtpPortStatusEntry 1 }

me1200SynceStatusPtpPortStatusSsmRx OBJECT-TYPE
    SYNTAX      ME1200synceQualityLevel
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Monitoring of the received SSM QL on this port."
    ::= { me1200SynceStatusPtpPortStatusEntry 2 }

me1200SynceStatusPtpPortStatusPtsf OBJECT-TYPE
    SYNTAX      ME1200syncePtsfState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "PTSF status for PTP source."
    ::= { me1200SynceStatusPtpPortStatusEntry 3 }

me1200SynceControl OBJECT IDENTIFIER
    ::= { me1200SynceMibObjects 4 }

me1200SynceControlSources OBJECT IDENTIFIER
    ::= { me1200SynceControl 1 }

me1200SynceControlSourcesClockSourceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200SynceControlSourcesClockSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is the SyncE sources control structure."
    ::= { me1200SynceControlSources 1 }

me1200SynceControlSourcesClockSourceEntry OBJECT-TYPE
    SYNTAX      ME1200SynceControlSourcesClockSourceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The sourceId index must be a value must be a value from 0 up to the
         number of sources minus one."
    INDEX       { me1200SynceControlSourcesClockSourceSourceId }
    ::= { me1200SynceControlSourcesClockSourceTable 1 }

ME1200SynceControlSourcesClockSourceEntry ::= SEQUENCE {
    me1200SynceControlSourcesClockSourceSourceId      Integer32,
    me1200SynceControlSourcesClockSourceClearWtr      ME1200Unsigned8
}

me1200SynceControlSourcesClockSourceSourceId OBJECT-TYPE
    SYNTAX      Integer32 (0..32767)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceControlSourcesClockSourceEntry 1 }

me1200SynceControlSourcesClockSourceClearWtr OBJECT-TYPE
    SYNTAX      ME1200Unsigned8
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "-"
    ::= { me1200SynceControlSourcesClockSourceEntry 2 }

me1200SynceNotificationPrefix OBJECT IDENTIFIER
    ::= { me1200SynceMibObjects 5 }

me1200SynceNotification OBJECT IDENTIFIER
    ::= { me1200SynceNotificationPrefix 0 }

me1200SynceNotificationClockSelectorStateChange NOTIFICATION-TYPE
    OBJECTS     { me1200SynceStatusGlobalClockSelectionModeClockInput, 
                  me1200SynceStatusGlobalClockSelectionModeSelectorState }
    STATUS        current
    DESCRIPTION
            "Notification is sent when the clock selector state is changed."
   ::= { me1200SynceNotification 1 }

me1200SynceMibConformance OBJECT IDENTIFIER
    ::= { me1200SynceMib 2 }

me1200SynceMibCompliances OBJECT IDENTIFIER
    ::= { me1200SynceMibConformance 1 }

me1200SynceMibGroups OBJECT IDENTIFIER
    ::= { me1200SynceMibConformance 2 }

me1200SynceCapabilitiesGlobalInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceCapabilitiesGlobalSourceCount }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 1 }

me1200SynceConfigGlobalClockSelectionModeInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceConfigGlobalClockSelectionModeSelectionMode, 
                  me1200SynceConfigGlobalClockSelectionModeSource, 
                  me1200SynceConfigGlobalClockSelectionModeWtrTime, 
                  me1200SynceConfigGlobalClockSelectionModeSsmHoldover, 
                  me1200SynceConfigGlobalClockSelectionModeSsmFreerun, 
                  me1200SynceConfigGlobalClockSelectionModeEecOption }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 2 }

me1200SynceConfigGlobalStationClocksInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceConfigGlobalStationClocksStationClkOut, 
                  me1200SynceConfigGlobalStationClocksStationClkIn }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 3 }

me1200SynceConfigSourcesClockSourceNominationInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceConfigSourcesClockSourceNominationNominated, 
                  me1200SynceConfigSourcesClockSourceNominationNetworkPort, 
                  me1200SynceConfigSourcesClockSourceNominationClkInPort, 
                  me1200SynceConfigSourcesClockSourceNominationPriority, 
                  me1200SynceConfigSourcesClockSourceNominationAnegMode, 
                  me1200SynceConfigSourcesClockSourceNominationSsmOverwrite, 
                  me1200SynceConfigSourcesClockSourceNominationHoldoffTime }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 4 }

me1200SynceConfigPortsPortConfigInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceConfigPortsPortConfigSsmEnabled }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 5 }

me1200SynceStatusGlobalClockSelectionModeInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceStatusGlobalClockSelectionModeClockInput, 
                  me1200SynceStatusGlobalClockSelectionModeSelectorState, 
                  me1200SynceStatusGlobalClockSelectionModeLosx, 
                  me1200SynceStatusGlobalClockSelectionModeLol, 
                  me1200SynceStatusGlobalClockSelectionModeDhold }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 6 }

me1200SynceStatusSourcesClockSourceNominationInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceStatusSourcesClockSourceNominationLocs, 
                  me1200SynceStatusSourcesClockSourceNominationFos, 
                  me1200SynceStatusSourcesClockSourceNominationSsm, 
                  me1200SynceStatusSourcesClockSourceNominationWtr }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 7 }

me1200SynceStatusPortsPortStatusInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceStatusPortsPortStatusSsmRx, 
                  me1200SynceStatusPortsPortStatusSsmTx, 
                  me1200SynceStatusPortsPortStatusMaster }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 8 }

me1200SynceStatusPtpPortStatusInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceStatusPtpPortStatusSsmRx, 
                  me1200SynceStatusPtpPortStatusPtsf }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 9 }

me1200SynceControlSourcesClockSourceInfoGroup OBJECT-GROUP
    OBJECTS     { me1200SynceControlSourcesClockSourceClearWtr }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 10 }

me1200SynceNotificationInfoGroup NOTIFICATION-GROUP
    NOTIFICATIONS { me1200SynceNotificationClockSelectorStateChange }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200SynceMibGroups 11 }

me1200SynceMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200SynceCapabilitiesGlobalInfoGroup, 
                  me1200SynceConfigGlobalClockSelectionModeInfoGroup, 
                  me1200SynceConfigGlobalStationClocksInfoGroup, 
                  me1200SynceConfigSourcesClockSourceNominationInfoGroup, 
                  me1200SynceConfigPortsPortConfigInfoGroup, 
                  me1200SynceStatusGlobalClockSelectionModeInfoGroup, 
                  me1200SynceStatusSourcesClockSourceNominationInfoGroup, 
                  me1200SynceStatusPortsPortStatusInfoGroup, 
                  me1200SynceStatusPtpPortStatusInfoGroup, 
                  me1200SynceControlSourcesClockSourceInfoGroup,
                  me1200SynceNotificationInfoGroup }

    ::= { me1200SynceMibCompliances 1 }

END