-- *****************************************************************
-- RMIRROR-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-RMIRROR-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    ME1200InterfaceIndex FROM ME1200-TC
    ME1200Unsigned16 FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200RmirrorMib MODULE-IDENTITY
    LAST-UPDATED "201405080000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of Rmirror"
    REVISION    "201405080000Z"
    DESCRIPTION
        "Fix smilint issue on enum type name"
    REVISION    "201405070000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 120 }


ME1200RmirrorMirrorType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the type of mirror traffic."
    SYNTAX      INTEGER { none(0), tx(1), rx(2), both(3) }

ME1200RmirrorPortType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the type of port."
    SYNTAX      INTEGER { none(0), intermediate(1), destination(2), reflector(3) }

ME1200RmirrorSwitchType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration defines the switch type in rmirror function."
    SYNTAX      INTEGER { mirror(0), source(1), intermediate(2), destination(3) }

me1200RmirrorMibObjects OBJECT IDENTIFIER
    ::= { me1200RmirrorMib 1 }

me1200RmirrorCapabilities OBJECT IDENTIFIER
    ::= { me1200RmirrorMibObjects 1 }

me1200RmirrorCapabilitiesReflectorPortSupport OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Indicate if reflector port is configurable or not. true(1) means
         supported. false(2) means not supported."
    ::= { me1200RmirrorCapabilities 1 }

me1200RmirrorCapabilitiesCpuMirrorSupport OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Indicate if mirroring CPU traffic is supported or not. true(1) means
         supported. false(2) means not supported."
    ::= { me1200RmirrorCapabilities 2 }

me1200RmirrorConfig OBJECT IDENTIFIER
    ::= { me1200RmirrorMibObjects 2 }

me1200RmirrorConfigSessionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200RmirrorConfigSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of global configuration per session"
    ::= { me1200RmirrorConfig 1 }

me1200RmirrorConfigSessionEntry OBJECT-TYPE
    SYNTAX      ME1200RmirrorConfigSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each session has a set of parameters"
    INDEX       { me1200RmirrorConfigSessionSessionId }
    ::= { me1200RmirrorConfigSessionTable 1 }

ME1200RmirrorConfigSessionEntry ::= SEQUENCE {
    me1200RmirrorConfigSessionSessionId   Integer32,
    me1200RmirrorConfigSessionMode    TruthValue,
    me1200RmirrorConfigSessionSwitchType      ME1200RmirrorSwitchType,
    me1200RmirrorConfigSessionVid     ME1200Unsigned16
}

me1200RmirrorConfigSessionSessionId OBJECT-TYPE
    SYNTAX      Integer32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Session ID."
    ::= { me1200RmirrorConfigSessionEntry 1 }

me1200RmirrorConfigSessionMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable the mirror or Remote Mirroring function. true(1) is to
         enable the function. false(2) is to disable it."
    ::= { me1200RmirrorConfigSessionEntry 2 }

me1200RmirrorConfigSessionSwitchType OBJECT-TYPE
    SYNTAX      ME1200RmirrorSwitchType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Switch type in rmirror. mirror(0) means to do the mirror function on
         the device. source(1) means the device acts as source node for monitor
         flow. intermediate(2) means the device acts as forwarding node for
         monitor flow. The object is to forward traffic from source switch to
         destination switch. destination(3) means the device acts as end node
         for moniot flow."
    ::= { me1200RmirrorConfigSessionEntry 3 }

me1200RmirrorConfigSessionVid OBJECT-TYPE
    SYNTAX      ME1200Unsigned16 (1..4096)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The VLAN ID points out where the monitor packet will copy to."
    ::= { me1200RmirrorConfigSessionEntry 4 }

me1200RmirrorConfigSessionSourceCpuTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200RmirrorConfigSessionSourceCpuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of source CPU configuration per session"
    ::= { me1200RmirrorConfig 2 }

me1200RmirrorConfigSessionSourceCpuEntry OBJECT-TYPE
    SYNTAX      ME1200RmirrorConfigSessionSourceCpuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each session has a set of parameters"
    INDEX       { me1200RmirrorConfigSessionSourceCpuSessionId, me1200RmirrorConfigSessionSourceCpuSwitchId }
    ::= { me1200RmirrorConfigSessionSourceCpuTable 1 }

ME1200RmirrorConfigSessionSourceCpuEntry ::= SEQUENCE {
    me1200RmirrorConfigSessionSourceCpuSessionId      Integer32,
    me1200RmirrorConfigSessionSourceCpuSwitchId   Integer32,
    me1200RmirrorConfigSessionSourceCpuMirrorType     ME1200RmirrorMirrorType
}

me1200RmirrorConfigSessionSourceCpuSessionId OBJECT-TYPE
    SYNTAX      Integer32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Session ID."
    ::= { me1200RmirrorConfigSessionSourceCpuEntry 1 }

me1200RmirrorConfigSessionSourceCpuSwitchId OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The identification of switch."
    ::= { me1200RmirrorConfigSessionSourceCpuEntry 2 }

me1200RmirrorConfigSessionSourceCpuMirrorType OBJECT-TYPE
    SYNTAX      ME1200RmirrorMirrorType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Mirror type on packets to/from CPU. none(0) means no mirror. tx(1) is
         to monitor the packets sent from CPU. rx(2) is to monitor the packets
         sent to CPU. both(3) is to monitor all packets sent from and to CPU.
         Some platforms do not support CPU mirror. Refer to CpuMirrorSupport in
         rmirrorCapabilities."
    ::= { me1200RmirrorConfigSessionSourceCpuEntry 3 }

me1200RmirrorConfigSessionSourceVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200RmirrorConfigSessionSourceVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of source VLAN configuration per session"
    ::= { me1200RmirrorConfig 3 }

me1200RmirrorConfigSessionSourceVlanEntry OBJECT-TYPE
    SYNTAX      ME1200RmirrorConfigSessionSourceVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each session has a set of parameters"
    INDEX       { me1200RmirrorConfigSessionSourceVlanSessionId, me1200RmirrorConfigSessionSourceVlanIfIndex }
    ::= { me1200RmirrorConfigSessionSourceVlanTable 1 }

ME1200RmirrorConfigSessionSourceVlanEntry ::= SEQUENCE {
    me1200RmirrorConfigSessionSourceVlanSessionId     Integer32,
    me1200RmirrorConfigSessionSourceVlanIfIndex   ME1200InterfaceIndex,
    me1200RmirrorConfigSessionSourceVlanMode      TruthValue
}

me1200RmirrorConfigSessionSourceVlanSessionId OBJECT-TYPE
    SYNTAX      Integer32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Session ID."
    ::= { me1200RmirrorConfigSessionSourceVlanEntry 1 }

me1200RmirrorConfigSessionSourceVlanIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of VLAN."
    ::= { me1200RmirrorConfigSessionSourceVlanEntry 2 }

me1200RmirrorConfigSessionSourceVlanMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable monitor per VLAN. true(1) is to enable the function.
         false(2) is to disable it."
    ::= { me1200RmirrorConfigSessionSourceVlanEntry 3 }

me1200RmirrorConfigSessionSourcePortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200RmirrorConfigSessionSourcePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of source port configuration per session"
    ::= { me1200RmirrorConfig 4 }

me1200RmirrorConfigSessionSourcePortEntry OBJECT-TYPE
    SYNTAX      ME1200RmirrorConfigSessionSourcePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each session has a set of parameters"
    INDEX       { me1200RmirrorConfigSessionSourcePortSessionId, me1200RmirrorConfigSessionSourcePortIfIndex }
    ::= { me1200RmirrorConfigSessionSourcePortTable 1 }

ME1200RmirrorConfigSessionSourcePortEntry ::= SEQUENCE {
    me1200RmirrorConfigSessionSourcePortSessionId     Integer32,
    me1200RmirrorConfigSessionSourcePortIfIndex   ME1200InterfaceIndex,
    me1200RmirrorConfigSessionSourcePortMirrorType    ME1200RmirrorMirrorType
}

me1200RmirrorConfigSessionSourcePortSessionId OBJECT-TYPE
    SYNTAX      Integer32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Session ID."
    ::= { me1200RmirrorConfigSessionSourcePortEntry 1 }

me1200RmirrorConfigSessionSourcePortIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of physical port."
    ::= { me1200RmirrorConfigSessionSourcePortEntry 2 }

me1200RmirrorConfigSessionSourcePortMirrorType OBJECT-TYPE
    SYNTAX      ME1200RmirrorMirrorType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Mirror type on frames to/from port. none(0) means no mirror. tx(1) is
         to monitor the packets sent from the port. rx(2) is to monitor the
         packets sent to the port. both(3) is to monitor all packets sent from
         and to the port."
    ::= { me1200RmirrorConfigSessionSourcePortEntry 3 }

me1200RmirrorConfigSessionPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200RmirrorConfigSessionPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of port configuration per session"
    ::= { me1200RmirrorConfig 5 }

me1200RmirrorConfigSessionPortEntry OBJECT-TYPE
    SYNTAX      ME1200RmirrorConfigSessionPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each session has a set of parameters"
    INDEX       { me1200RmirrorConfigSessionPortSessionId, me1200RmirrorConfigSessionPortIfIndex }
    ::= { me1200RmirrorConfigSessionPortTable 1 }

ME1200RmirrorConfigSessionPortEntry ::= SEQUENCE {
    me1200RmirrorConfigSessionPortSessionId   Integer32,
    me1200RmirrorConfigSessionPortIfIndex     ME1200InterfaceIndex,
    me1200RmirrorConfigSessionPortType    ME1200RmirrorPortType
}

me1200RmirrorConfigSessionPortSessionId OBJECT-TYPE
    SYNTAX      Integer32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Session ID."
    ::= { me1200RmirrorConfigSessionPortEntry 1 }

me1200RmirrorConfigSessionPortIfIndex OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number of physical port."
    ::= { me1200RmirrorConfigSessionPortEntry 2 }

me1200RmirrorConfigSessionPortType OBJECT-TYPE
    SYNTAX      ME1200RmirrorPortType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Type of port in rmirror function. none(0) means no mirror.
         intermediate(1) means the port to be a forwarding port. destination(2)
         means the port to be an end port. reflector(3) means the port to be a
         reflector port."
    ::= { me1200RmirrorConfigSessionPortEntry 3 }

me1200RmirrorMibConformance OBJECT IDENTIFIER
    ::= { me1200RmirrorMib 2 }

me1200RmirrorMibCompliances OBJECT IDENTIFIER
    ::= { me1200RmirrorMibConformance 1 }

me1200RmirrorMibGroups OBJECT IDENTIFIER
    ::= { me1200RmirrorMibConformance 2 }

me1200RmirrorCapabilitiesInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorCapabilitiesReflectorPortSupport, 
                  me1200RmirrorCapabilitiesCpuMirrorSupport }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 1 }

me1200RmirrorConfigSessionTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorConfigSessionMode, 
                  me1200RmirrorConfigSessionSwitchType, 
                  me1200RmirrorConfigSessionVid }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 2 }

me1200RmirrorConfigSessionSourceCpuTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorConfigSessionSourceCpuMirrorType }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 3 }

me1200RmirrorConfigSessionSourceVlanTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorConfigSessionSourceVlanMode }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 4 }

me1200RmirrorConfigSessionSourcePortTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorConfigSessionSourcePortMirrorType }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 5 }

me1200RmirrorConfigSessionPortTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200RmirrorConfigSessionPortType }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200RmirrorMibGroups 6 }

me1200RmirrorMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200RmirrorCapabilitiesInfoGroup, 
                  me1200RmirrorConfigSessionTableInfoGroup, 
                  me1200RmirrorConfigSessionSourceCpuTableInfoGroup, 
                  me1200RmirrorConfigSessionSourceVlanTableInfoGroup, 
                  me1200RmirrorConfigSessionSourcePortTableInfoGroup, 
                  me1200RmirrorConfigSessionPortTableInfoGroup }

    ::= { me1200RmirrorMibCompliances 1 }

END