-- *****************************************************************
-- LACP-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-LACP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    ME1200InterfaceIndex FROM ME1200-TC
    ME1200Unsigned16 FROM ME1200-TC
    ME1200Unsigned8 FROM ME1200-TC
    Counter64 FROM SNMPv2-SMI
    Unsigned32 FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200LacpMib MODULE-IDENTITY
    LAST-UPDATED "201403110000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of the IEEE802.3ad LAG MIB"
    REVISION    "201403110000Z"
    DESCRIPTION
        "Definition of type InterfaceIndex changed from Unsigned32 to Integer32
         as it is used as index in some tables"
    REVISION    "201402180000Z"
    DESCRIPTION
        "Do no use Unsigned32 for indexes"
    REVISION    "201401290000Z"
    DESCRIPTION
        "Locate all objects under ciscoME1200MIB"
    REVISION    "201401220000Z"
    DESCRIPTION
        "Changed size of me1200LacpSystemStatusDot3adAggrLocalPorts."
    REVISION    "201310080000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 35 }


me1200LacpMibObjects OBJECT IDENTIFIER
    ::= { me1200LacpMib 1 }

me1200LacpConfig OBJECT IDENTIFIER
    ::= { me1200LacpMibObjects 2 }

me1200LacpPortConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LacpPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of the LACP port configurations"
    ::= { me1200LacpConfig 1 }

me1200LacpPortConfigEntry OBJECT-TYPE
    SYNTAX      ME1200LacpPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters"
    INDEX       { me1200LacpPortConfigInterfaceNo }
    ::= { me1200LacpPortConfigTable 1 }

ME1200LacpPortConfigEntry ::= SEQUENCE {
    me1200LacpPortConfigInterfaceNo   ME1200InterfaceIndex,
    me1200LacpPortConfigDot3adAggrActorAdminMode      TruthValue,
    me1200LacpPortConfigDot3adAggrActorAdminKey   ME1200Unsigned16,
    me1200LacpPortConfigDot3adAggrRole    TruthValue,
    me1200LacpPortConfigDot3adAggrTimeout     TruthValue,
    me1200LacpPortConfigDot3adAggrPortPriority    ME1200Unsigned16
}

me1200LacpPortConfigInterfaceNo OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LacpPortConfigEntry 1 }

me1200LacpPortConfigDot3adAggrActorAdminMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Control whether port is LACP enabled(1) or disabled(0)."
    ::= { me1200LacpPortConfigEntry 2 }

me1200LacpPortConfigDot3adAggrActorAdminKey OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The current administrative value of the Key for the Aggregator. The
         administrative Key value may differ from the operational Key value for
         the reasons discussed in 43.6.2. This is a 16-bit, read-write value.
         The meaning of particular Key values is of local significance"
    ::= { me1200LacpPortConfigEntry 3 }

me1200LacpPortConfigDot3adAggrRole OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The Role shows the LACP activity status. The Active(true) will transmit
         LACP packets each second, while Passive(false) will wait for a LACP
         packet from a partner"
    ::= { me1200LacpPortConfigEntry 4 }

me1200LacpPortConfigDot3adAggrTimeout OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The Timeout controls the period between BPDU transmissions. Fast(true)
         will transmit LACP packets each second, while Slow(0) will wait for 30
         seconds before sending a LACP packet."
    ::= { me1200LacpPortConfigEntry 5 }

me1200LacpPortConfigDot3adAggrPortPriority OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The Port Priority controls the priority of the port. If the LACP
         partner wants to form a larger group than is supported by this device
         then this parameter will control which ports will be active and which
         ports will be in a backup role. Lower number means greater priority"
    ::= { me1200LacpPortConfigEntry 6 }

me1200LacpStatus OBJECT IDENTIFIER
    ::= { me1200LacpMibObjects 3 }

me1200LacpSystemStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LacpSystemStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of the LACP system status"
    ::= { me1200LacpStatus 1 }

me1200LacpSystemStatusEntry OBJECT-TYPE
    SYNTAX      ME1200LacpSystemStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each lag has a set of parameters"
    INDEX       { me1200LacpSystemStatusInterfaceNo }
    ::= { me1200LacpSystemStatusTable 1 }

ME1200LacpSystemStatusEntry ::= SEQUENCE {
    me1200LacpSystemStatusInterfaceNo     ME1200InterfaceIndex,
    me1200LacpSystemStatusDot3adAggrID    ME1200Unsigned16,
    me1200LacpSystemStatusDot3adAggrPartnerSystemID   OCTET STRING,
    me1200LacpSystemStatusDot3adAggrPartnerOperKey    ME1200Unsigned16,
    me1200LacpSystemStatusDot3adAggrPartnerOperSystemPriority     ME1200Unsigned16,
    me1200LacpSystemStatusDot3adAggrPartnerStateLastChanged   Unsigned32,
    me1200LacpSystemStatusDot3adAggrLocalPorts    OCTET STRING
}

me1200LacpSystemStatusInterfaceNo OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LacpSystemStatusEntry 1 }

me1200LacpSystemStatusDot3adAggrID OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The aggregation ID for a particular link aggregation group."
    ::= { me1200LacpSystemStatusEntry 2 }

me1200LacpSystemStatusDot3adAggrPartnerSystemID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(6))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The system ID (MAC address) of the aggregation partner."
    ::= { me1200LacpSystemStatusEntry 3 }

me1200LacpSystemStatusDot3adAggrPartnerOperKey OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The Key that the partner has assigned to this aggregation ID."
    ::= { me1200LacpSystemStatusEntry 4 }

me1200LacpSystemStatusDot3adAggrPartnerOperSystemPriority OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "A 2-octet read-only value indicating the operational value of priority
         associated with the Partner's System ID. The value of this attribute
         may contain the manually configured value carried in
         aAggPortPartnerAdminSystemPriority if there is no protocol Partner."
    ::= { me1200LacpSystemStatusEntry 5 }

me1200LacpSystemStatusDot3adAggrPartnerStateLastChanged OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The time in second since this aggregation changed"
    ::= { me1200LacpSystemStatusEntry 6 }

me1200LacpSystemStatusDot3adAggrLocalPorts OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..1))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Local port list"
    ::= { me1200LacpSystemStatusEntry 7 }

me1200LacpPortStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LacpPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of the LACP port status"
    ::= { me1200LacpStatus 2 }

me1200LacpPortStatusEntry OBJECT-TYPE
    SYNTAX      ME1200LacpPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters"
    INDEX       { me1200LacpPortStatusInterfaceNo }
    ::= { me1200LacpPortStatusTable 1 }

ME1200LacpPortStatusEntry ::= SEQUENCE {
    me1200LacpPortStatusInterfaceNo   ME1200InterfaceIndex,
    me1200LacpPortStatusDot3adAggrActorAdminMode      TruthValue,
    me1200LacpPortStatusDot3adAggrActorAdminKey   ME1200Unsigned16,
    me1200LacpPortStatusDot3adAggrPartnerOperPortIndex    ME1200Unsigned8,
    me1200LacpPortStatusDot3adAggrPartnerOperPortPriority     ME1200Unsigned16
}

me1200LacpPortStatusInterfaceNo OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LacpPortStatusEntry 1 }

me1200LacpPortStatusDot3adAggrActorAdminMode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows the current Admin mode of port, if LACP enabled then returns true
         else returns false."
    ::= { me1200LacpPortStatusEntry 2 }

me1200LacpPortStatusDot3adAggrActorAdminKey OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows the current administrative value of the Key for the Aggregator.
         The administrative Key value may differ from the operational Key value
         for the reasons discussed in 43.6.2. This is a 16-bit, read-write
         value. The meaning of particular Key values is of local significance"
    ::= { me1200LacpPortStatusEntry 3 }

me1200LacpPortStatusDot3adAggrPartnerOperPortIndex OBJECT-TYPE
    SYNTAX      ME1200Unsigned8
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows the port index of the partner port connected to this port."
    ::= { me1200LacpPortStatusEntry 4 }

me1200LacpPortStatusDot3adAggrPartnerOperPortPriority OBJECT-TYPE
    SYNTAX      ME1200Unsigned16
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows the port priority of the port partner port connected to this
         port."
    ::= { me1200LacpPortStatusEntry 5 }

me1200LacpPortStatisticsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LacpPortStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table of the LACP port statistics"
    ::= { me1200LacpStatus 3 }

me1200LacpPortStatisticsEntry OBJECT-TYPE
    SYNTAX      ME1200LacpPortStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters"
    INDEX       { me1200LacpPortStatisticsInterfaceNo }
    ::= { me1200LacpPortStatisticsTable 1 }

ME1200LacpPortStatisticsEntry ::= SEQUENCE {
    me1200LacpPortStatisticsInterfaceNo   ME1200InterfaceIndex,
    me1200LacpPortStatisticsDot3adAggrRxFrames    Counter64,
    me1200LacpPortStatisticsDot3adAggrTxFrames    Counter64,
    me1200LacpPortStatisticsDot3adAggrRxIllegalFrames     Counter64,
    me1200LacpPortStatisticsDot3adAggrRxUnknownFrames     Counter64
}

me1200LacpPortStatisticsInterfaceNo OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LacpPortStatisticsEntry 1 }

me1200LacpPortStatisticsDot3adAggrRxFrames OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows received LACP frame count."
    ::= { me1200LacpPortStatisticsEntry 2 }

me1200LacpPortStatisticsDot3adAggrTxFrames OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows transmitted LACP frame count."
    ::= { me1200LacpPortStatisticsEntry 3 }

me1200LacpPortStatisticsDot3adAggrRxIllegalFrames OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows recevied illegal LACP frame count."
    ::= { me1200LacpPortStatisticsEntry 4 }

me1200LacpPortStatisticsDot3adAggrRxUnknownFrames OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Shows recevied unknown LACP frame count."
    ::= { me1200LacpPortStatisticsEntry 5 }

me1200LacpControl OBJECT IDENTIFIER
    ::= { me1200LacpMibObjects 4 }

me1200LacpPortStatsClearTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200LacpPortStatsClearEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table to clear LACP port statistics"
    ::= { me1200LacpControl 1 }

me1200LacpPortStatsClearEntry OBJECT-TYPE
    SYNTAX      ME1200LacpPortStatsClearEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each port has a set of parameters"
    INDEX       { me1200LacpPortStatsClearInterfaceNo }
    ::= { me1200LacpPortStatsClearTable 1 }

ME1200LacpPortStatsClearEntry ::= SEQUENCE {
    me1200LacpPortStatsClearInterfaceNo   ME1200InterfaceIndex,
    me1200LacpPortStatsClearPortStatisticsClear   TruthValue
}

me1200LacpPortStatsClearInterfaceNo OBJECT-TYPE
    SYNTAX      ME1200InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Logical interface number."
    ::= { me1200LacpPortStatsClearEntry 1 }

me1200LacpPortStatsClearPortStatisticsClear OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Set to true to clear the statistics of a port."
    ::= { me1200LacpPortStatsClearEntry 2 }

me1200LacpMibConformance OBJECT IDENTIFIER
    ::= { me1200LacpMib 2 }

me1200LacpMibCompliances OBJECT IDENTIFIER
    ::= { me1200LacpMibConformance 1 }

me1200LacpMibGroups OBJECT IDENTIFIER
    ::= { me1200LacpMibConformance 2 }

me1200LacpPortConfigTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LacpPortConfigDot3adAggrActorAdminMode, 
                  me1200LacpPortConfigDot3adAggrActorAdminKey, 
                  me1200LacpPortConfigDot3adAggrRole, 
                  me1200LacpPortConfigDot3adAggrTimeout, 
                  me1200LacpPortConfigDot3adAggrPortPriority }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LacpMibGroups 1 }

me1200LacpSystemStatusTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LacpSystemStatusDot3adAggrID, 
                  me1200LacpSystemStatusDot3adAggrPartnerSystemID, 
                  me1200LacpSystemStatusDot3adAggrPartnerOperKey, 
                  me1200LacpSystemStatusDot3adAggrPartnerOperSystemPriority, 
                  me1200LacpSystemStatusDot3adAggrPartnerStateLastChanged, 
                  me1200LacpSystemStatusDot3adAggrLocalPorts }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LacpMibGroups 2 }

me1200LacpPortStatusTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LacpPortStatusDot3adAggrActorAdminMode, 
                  me1200LacpPortStatusDot3adAggrActorAdminKey, 
                  me1200LacpPortStatusDot3adAggrPartnerOperPortIndex, 
                  me1200LacpPortStatusDot3adAggrPartnerOperPortPriority }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LacpMibGroups 3 }

me1200LacpPortStatisticsTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LacpPortStatisticsDot3adAggrRxFrames, 
                  me1200LacpPortStatisticsDot3adAggrTxFrames, 
                  me1200LacpPortStatisticsDot3adAggrRxIllegalFrames, 
                  me1200LacpPortStatisticsDot3adAggrRxUnknownFrames }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LacpMibGroups 4 }

me1200LacpPortStatsClearTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200LacpPortStatsClearPortStatisticsClear }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200LacpMibGroups 5 }

me1200LacpMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200LacpPortConfigTableInfoGroup, 
                  me1200LacpSystemStatusTableInfoGroup, 
                  me1200LacpPortStatusTableInfoGroup, 
                  me1200LacpPortStatisticsTableInfoGroup, 
                  me1200LacpPortStatsClearTableInfoGroup }

    ::= { me1200LacpMibCompliances 1 }

END