-- *****************************************************************
-- IPMC-PROFILE-MIB:  ME1200 Private MIB
--
--
-- ****************************************************************

ME1200-IPMC-PROFILE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    me1200SwitchMgmt
        FROM CISCOME1200-MIB
    InetAddressIPv6 FROM INET-ADDRESS-MIB
    ME1200DisplayString FROM ME1200-TC
    ME1200RowEditorState FROM ME1200-TC
    Integer32 FROM SNMPv2-SMI
    IpAddress FROM SNMPv2-SMI
    TruthValue FROM SNMPv2-TC
    ;

me1200IpmcProfileMib MODULE-IDENTITY
    LAST-UPDATED "201403110000Z"
    ORGANIZATION
        "Cisco Systems, Inc"
    CONTACT-INFO
        "Cisco Systems, Inc
        Customer Service
        Postal: 170 W Tasman Drive
        San Jose, CA 95134
        USA
        Tel: +1 800 553-NETS
        E-mail: cs-me1200@cisco.com"
    DESCRIPTION
        "This is a private version of the IPMC Profile MIB"
    REVISION    "201403110000Z"
    DESCRIPTION
        "Do no use Unsigned32 for indexes"
    REVISION    "201401290000Z"
    DESCRIPTION
        "Locate all objects under ciscoME1200MIB"
    REVISION    "201401220000Z"
    DESCRIPTION
        "Initial version"
    ::= { me1200SwitchMgmt 38 }


ME1200IpmcProfileRuleActionType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "This enumeration indicates the configured action type for IPMC profile
         rule."
    SYNTAX      INTEGER { deny(0), permit(1) }

me1200IpmcProfileMIBObjects OBJECT IDENTIFIER
    ::= { me1200IpmcProfileMib 1 }

me1200IpmcProfileConfig OBJECT IDENTIFIER
    ::= { me1200IpmcProfileMIBObjects 2 }

me1200IpmcProfileGlobals OBJECT IDENTIFIER
    ::= { me1200IpmcProfileConfig 1 }

me1200IpmcProfileGlobalsAdminState OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable/Disable the IPMC Profile global functionality."
    ::= { me1200IpmcProfileGlobals 1 }

me1200IpmcProfileManagementTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcProfileManagementEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing IPMC profile entries."
    ::= { me1200IpmcProfileConfig 2 }

me1200IpmcProfileManagementEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileManagementEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200IpmcProfileManagementProfileName }
    ::= { me1200IpmcProfileManagementTable 1 }

ME1200IpmcProfileManagementEntry ::= SEQUENCE {
    me1200IpmcProfileManagementProfileName    ME1200DisplayString,
    me1200IpmcProfileManagementProfileDescription     ME1200DisplayString,
    me1200IpmcProfileManagementAction     ME1200RowEditorState
}

me1200IpmcProfileManagementProfileName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile management entry."
    ::= { me1200IpmcProfileManagementEntry 1 }

me1200IpmcProfileManagementProfileDescription OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..64))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The description of the IPMC Profile management entry."
    ::= { me1200IpmcProfileManagementEntry 2 }

me1200IpmcProfileManagementAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileManagementEntry 100 }

me1200IpmcProfileManagementTableRowEditor OBJECT IDENTIFIER
    ::= { me1200IpmcProfileConfig 3 }

me1200IpmcProfileManagementTableRowEditorProfileName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile management entry."
    ::= { me1200IpmcProfileManagementTableRowEditor 1 }

me1200IpmcProfileManagementTableRowEditorProfileDescription OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..64))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The description of the IPMC Profile management entry."
    ::= { me1200IpmcProfileManagementTableRowEditor 2 }

me1200IpmcProfileManagementTableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileManagementTableRowEditor 100 }

me1200IpmcProfileIpv4AddressRangeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcProfileIpv4AddressRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing the IPv4 address range entries that will
         be applied for IPMC profile(s)."
    ::= { me1200IpmcProfileConfig 4 }

me1200IpmcProfileIpv4AddressRangeEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileIpv4AddressRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200IpmcProfileIpv4AddressRangeRangeName }
    ::= { me1200IpmcProfileIpv4AddressRangeTable 1 }

ME1200IpmcProfileIpv4AddressRangeEntry ::= SEQUENCE {
    me1200IpmcProfileIpv4AddressRangeRangeName    ME1200DisplayString,
    me1200IpmcProfileIpv4AddressRangeStartAddress     IpAddress,
    me1200IpmcProfileIpv4AddressRangeEndAddress   IpAddress,
    me1200IpmcProfileIpv4AddressRangeAction   ME1200RowEditorState
}

me1200IpmcProfileIpv4AddressRangeRangeName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range entry."
    ::= { me1200IpmcProfileIpv4AddressRangeEntry 1 }

me1200IpmcProfileIpv4AddressRangeStartAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv4 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv4AddressRangeEntry 2 }

me1200IpmcProfileIpv4AddressRangeEndAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv4 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv4AddressRangeEntry 3 }

me1200IpmcProfileIpv4AddressRangeAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileIpv4AddressRangeEntry 100 }

me1200IpmcProfileIpv4AddressRangeTableRowEditor OBJECT IDENTIFIER
    ::= { me1200IpmcProfileConfig 5 }

me1200IpmcProfileIpv4AddressRangeTableRowEditorRangeName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range entry."
    ::= { me1200IpmcProfileIpv4AddressRangeTableRowEditor 1 }

me1200IpmcProfileIpv4AddressRangeTableRowEditorStartAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv4 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv4AddressRangeTableRowEditor 2 }

me1200IpmcProfileIpv4AddressRangeTableRowEditorEndAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv4 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv4AddressRangeTableRowEditor 3 }

me1200IpmcProfileIpv4AddressRangeTableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileIpv4AddressRangeTableRowEditor 100 }

me1200IpmcProfileIpv6AddressRangeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcProfileIpv6AddressRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing the IPv6 address range entries that will
         be applied for IPMC profile(s)."
    ::= { me1200IpmcProfileConfig 6 }

me1200IpmcProfileIpv6AddressRangeEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileIpv6AddressRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200IpmcProfileIpv6AddressRangeRangeName }
    ::= { me1200IpmcProfileIpv6AddressRangeTable 1 }

ME1200IpmcProfileIpv6AddressRangeEntry ::= SEQUENCE {
    me1200IpmcProfileIpv6AddressRangeRangeName    ME1200DisplayString,
    me1200IpmcProfileIpv6AddressRangeStartAddress     InetAddressIPv6,
    me1200IpmcProfileIpv6AddressRangeEndAddress   InetAddressIPv6,
    me1200IpmcProfileIpv6AddressRangeAction   ME1200RowEditorState
}

me1200IpmcProfileIpv6AddressRangeRangeName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range entry."
    ::= { me1200IpmcProfileIpv6AddressRangeEntry 1 }

me1200IpmcProfileIpv6AddressRangeStartAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv6 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv6AddressRangeEntry 2 }

me1200IpmcProfileIpv6AddressRangeEndAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv6 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv6AddressRangeEntry 3 }

me1200IpmcProfileIpv6AddressRangeAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileIpv6AddressRangeEntry 100 }

me1200IpmcProfileIpv6AddressRangeTableRowEditor OBJECT IDENTIFIER
    ::= { me1200IpmcProfileConfig 7 }

me1200IpmcProfileIpv6AddressRangeTableRowEditorRangeName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range entry."
    ::= { me1200IpmcProfileIpv6AddressRangeTableRowEditor 1 }

me1200IpmcProfileIpv6AddressRangeTableRowEditorStartAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The starting IPv6 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv6AddressRangeTableRowEditor 2 }

me1200IpmcProfileIpv6AddressRangeTableRowEditorEndAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The ending IPv6 address of the range that IPMC Profile performs
         checking."
    ::= { me1200IpmcProfileIpv6AddressRangeTableRowEditor 3 }

me1200IpmcProfileIpv6AddressRangeTableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileIpv6AddressRangeTableRowEditor 100 }

me1200IpmcProfileRuleTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcProfileRuleEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for managing the filtering rules with respect to a set
         of address range used in a specific IPMC profile management entry."
    ::= { me1200IpmcProfileConfig 8 }

me1200IpmcProfileRuleEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileRuleEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters"
    INDEX       { me1200IpmcProfileRuleProfileName, me1200IpmcProfileRuleRuleRange }
    ::= { me1200IpmcProfileRuleTable 1 }

ME1200IpmcProfileRuleEntry ::= SEQUENCE {
    me1200IpmcProfileRuleProfileName      ME1200DisplayString,
    me1200IpmcProfileRuleRuleRange    ME1200DisplayString,
    me1200IpmcProfileRuleNextRuleRange    ME1200DisplayString,
    me1200IpmcProfileRuleRuleAction   ME1200IpmcProfileRuleActionType,
    me1200IpmcProfileRuleRuleLog      TruthValue,
    me1200IpmcProfileRuleAction   ME1200RowEditorState
}

me1200IpmcProfileRuleProfileName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile management entry."
    ::= { me1200IpmcProfileRuleEntry 1 }

me1200IpmcProfileRuleRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range used as a rule."
    ::= { me1200IpmcProfileRuleEntry 2 }

me1200IpmcProfileRuleNextRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The next rule's address range name that this IPMC Profile management
         entry performs checking."
    ::= { me1200IpmcProfileRuleEntry 3 }

me1200IpmcProfileRuleRuleAction OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileRuleActionType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The filtering action while this IPMC Profile management entry performs
         checking. deny(0) will prohibit the IPMC control frames destined to
         protocol stack. permit(1) will pass the IPMC control frames destined to
         protocol stack."
    ::= { me1200IpmcProfileRuleEntry 4 }

me1200IpmcProfileRuleRuleLog OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable the IPMC Profile will log matched group address that is filtered
         by this rule with the corresponding action (deny or permit). Disable
         the IPMC Profile will not log any action for any group address whether
         or not to be filtered by this rule."
    ::= { me1200IpmcProfileRuleEntry 5 }

me1200IpmcProfileRuleAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileRuleEntry 100 }

me1200IpmcProfileRuleTableRowEditor OBJECT IDENTIFIER
    ::= { me1200IpmcProfileConfig 9 }

me1200IpmcProfileRuleTableRowEditorProfileName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile management entry."
    ::= { me1200IpmcProfileRuleTableRowEditor 1 }

me1200IpmcProfileRuleTableRowEditorRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range used as a rule."
    ::= { me1200IpmcProfileRuleTableRowEditor 2 }

me1200IpmcProfileRuleTableRowEditorNextRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The next rule's address range name that this IPMC Profile management
         entry performs checking."
    ::= { me1200IpmcProfileRuleTableRowEditor 3 }

me1200IpmcProfileRuleTableRowEditorRuleAction OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileRuleActionType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "The filtering action while this IPMC Profile management entry performs
         checking. deny(0) will prohibit the IPMC control frames destined to
         protocol stack. permit(1) will pass the IPMC control frames destined to
         protocol stack."
    ::= { me1200IpmcProfileRuleTableRowEditor 4 }

me1200IpmcProfileRuleTableRowEditorRuleLog OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Enable the IPMC Profile will log matched group address that is filtered
         by this rule with the corresponding action (deny or permit). Disable
         the IPMC Profile will not log any action for any group address whether
         or not to be filtered by this rule."
    ::= { me1200IpmcProfileRuleTableRowEditor 5 }

me1200IpmcProfileRuleTableRowEditorAction OBJECT-TYPE
    SYNTAX      ME1200RowEditorState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "Action"
    ::= { me1200IpmcProfileRuleTableRowEditor 100 }

me1200IpmcProfilePrecedenceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ME1200IpmcProfilePrecedenceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This is a table for displaying the rule entries of a specific IPMC
         profile in precedence order."
    ::= { me1200IpmcProfileConfig 10 }

me1200IpmcProfilePrecedenceEntry OBJECT-TYPE
    SYNTAX      ME1200IpmcProfilePrecedenceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry has a set of parameters."
    INDEX       { me1200IpmcProfilePrecedenceProfileName, me1200IpmcProfilePrecedenceRulePrecedence }
    ::= { me1200IpmcProfilePrecedenceTable 1 }

ME1200IpmcProfilePrecedenceEntry ::= SEQUENCE {
    me1200IpmcProfilePrecedenceProfileName    ME1200DisplayString,
    me1200IpmcProfilePrecedenceRulePrecedence     Integer32,
    me1200IpmcProfilePrecedenceRuleRange      ME1200DisplayString,
    me1200IpmcProfilePrecedenceNextRuleRange      ME1200DisplayString,
    me1200IpmcProfilePrecedenceRuleAction     ME1200IpmcProfileRuleActionType,
    me1200IpmcProfilePrecedenceRuleLog    TruthValue
}

me1200IpmcProfilePrecedenceProfileName OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile management entry."
    ::= { me1200IpmcProfilePrecedenceEntry 1 }

me1200IpmcProfilePrecedenceRulePrecedence OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The precedence of the IPMC profile rule entry."
    ::= { me1200IpmcProfilePrecedenceEntry 2 }

me1200IpmcProfilePrecedenceRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The name of the IPMC profile address range used as a rule."
    ::= { me1200IpmcProfilePrecedenceEntry 3 }

me1200IpmcProfilePrecedenceNextRuleRange OBJECT-TYPE
    SYNTAX      ME1200DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The next rule's address range name that this IPMC Profile management
         entry performs checking."
    ::= { me1200IpmcProfilePrecedenceEntry 4 }

me1200IpmcProfilePrecedenceRuleAction OBJECT-TYPE
    SYNTAX      ME1200IpmcProfileRuleActionType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The filtering action while this IPMC Profile management entry performs
         checking. deny(0) will prohibit the IPMC control frames destined to
         protocol stack. permit(1) will pass the IPMC control frames destined to
         protocol stack."
    ::= { me1200IpmcProfilePrecedenceEntry 5 }

me1200IpmcProfilePrecedenceRuleLog OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Enable the IPMC Profile will log matched group address that is filtered
         by this rule with the corresponding action (deny or permit). Disable
         the IPMC Profile will not log any action for any group address whether
         or not to be filtered by this rule."
    ::= { me1200IpmcProfilePrecedenceEntry 6 }

me1200IpmcProfileMIBConformance OBJECT IDENTIFIER
    ::= { me1200IpmcProfileMib 2 }

me1200IpmcProfileMIBCompliances OBJECT IDENTIFIER
    ::= { me1200IpmcProfileMIBConformance 1 }

me1200IpmcProfileMIBGroups OBJECT IDENTIFIER
    ::= { me1200IpmcProfileMIBConformance 2 }

me1200IpmcProfileGlobalsInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileGlobalsAdminState }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 1 }

me1200IpmcProfileManagementTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileManagementProfileDescription, 
                  me1200IpmcProfileManagementAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 2 }

me1200IpmcProfileManagementTableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileManagementTableRowEditorProfileName, 
                  me1200IpmcProfileManagementTableRowEditorProfileDescription, 
                  me1200IpmcProfileManagementTableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 3 }

me1200IpmcProfileIpv4AddressRangeTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileIpv4AddressRangeStartAddress, 
                  me1200IpmcProfileIpv4AddressRangeEndAddress, 
                  me1200IpmcProfileIpv4AddressRangeAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 4 }

me1200IpmcProfileIpv4AddressRangeTableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileIpv4AddressRangeTableRowEditorRangeName, 
                  me1200IpmcProfileIpv4AddressRangeTableRowEditorStartAddress, 
                  me1200IpmcProfileIpv4AddressRangeTableRowEditorEndAddress, 
                  me1200IpmcProfileIpv4AddressRangeTableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 5 }

me1200IpmcProfileIpv6AddressRangeTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileIpv6AddressRangeStartAddress, 
                  me1200IpmcProfileIpv6AddressRangeEndAddress, 
                  me1200IpmcProfileIpv6AddressRangeAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 6 }

me1200IpmcProfileIpv6AddressRangeTableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileIpv6AddressRangeTableRowEditorRangeName, 
                  me1200IpmcProfileIpv6AddressRangeTableRowEditorStartAddress, 
                  me1200IpmcProfileIpv6AddressRangeTableRowEditorEndAddress, 
                  me1200IpmcProfileIpv6AddressRangeTableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 7 }

me1200IpmcProfileRuleTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileRuleNextRuleRange, 
                  me1200IpmcProfileRuleRuleAction, me1200IpmcProfileRuleRuleLog, 
                  me1200IpmcProfileRuleAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 8 }

me1200IpmcProfileRuleTableRowEditorInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfileRuleTableRowEditorProfileName, 
                  me1200IpmcProfileRuleTableRowEditorRuleRange, 
                  me1200IpmcProfileRuleTableRowEditorNextRuleRange, 
                  me1200IpmcProfileRuleTableRowEditorRuleAction, 
                  me1200IpmcProfileRuleTableRowEditorRuleLog, 
                  me1200IpmcProfileRuleTableRowEditorAction }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 9 }

me1200IpmcProfilePrecedenceTableInfoGroup OBJECT-GROUP
    OBJECTS     { me1200IpmcProfilePrecedenceRuleRange, 
                  me1200IpmcProfilePrecedenceNextRuleRange, 
                  me1200IpmcProfilePrecedenceRuleAction, 
                  me1200IpmcProfilePrecedenceRuleLog }
    STATUS      current
    DESCRIPTION
        "A collection of objects suitable for bulk operations."
    ::= { me1200IpmcProfileMIBGroups 10 }

me1200IpmcProfileMibCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for the implementation."

    MODULE      -- this module

        MANDATORY-GROUPS        { me1200IpmcProfileGlobalsInfoGroup, 
                  me1200IpmcProfileManagementTableInfoGroup, 
                  me1200IpmcProfileManagementTableRowEditorInfoGroup, 
                  me1200IpmcProfileIpv4AddressRangeTableInfoGroup, 
                  me1200IpmcProfileIpv4AddressRangeTableRowEditorInfoGroup, 
                  me1200IpmcProfileIpv6AddressRangeTableInfoGroup, 
                  me1200IpmcProfileIpv6AddressRangeTableRowEditorInfoGroup, 
                  me1200IpmcProfileRuleTableInfoGroup, 
                  me1200IpmcProfileRuleTableRowEditorInfoGroup, 
                  me1200IpmcProfilePrecedenceTableInfoGroup }

    ::= { me1200IpmcProfileMIBCompliances 1 }

END