-- ******************************************************************* -- CISCO-LWAPP-GUEST-LAN-MIB.my -- This MIB helps to manage the GUESTLANs on the controller -- July 2019, A. Consolini -- -- Copyright (c) 2019 by Cisco Systems, Inc. -- All rights reserved. -- ******************************************************************* CISCO-LWAPP-GUEST-LAN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI; ciscoLwappGuestLanMIB MODULE-IDENTITY LAST-UPDATED "201810160000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems, Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wnbu-snmp@cisco.com" DESCRIPTION "The controller is handling the configuration of possible guest access to the Cisco network. The same wireless LAN controller can be used to provide access to both types, wireless and wired. This MIB is intended to implement wired guest (guest lan) on the overall wireless lan controller. This MIB allows to configure the guest lan profile and its attributes. The main attributes that can be configured are: - security method like open or LWA (local web authentication). - The wired vlan associated with the guest lan can be configured too. GLOSSARY Central Controller ( CC ) The central entity that handles the guest lan configuration. Throughout this MIB, this entity is also referred to as 'controller'." REVISION "201810160000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 868 } ciscoLwappGuestLanMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappGuestLanMIB 0 } ciscoLwappGuestLanMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappGuestLanMIB 1 } ciscoLwappGuestLanConform OBJECT IDENTIFIER ::= { ciscoLwappGuestLanMIB 2 } ciscoLwappGuestLanConfig OBJECT IDENTIFIER ::= { ciscoLwappGuestLanMIBObjects 1 } -- ******************************************************************** -- GUEST LAN configuration -- ******************************************************************** cLGuestLanTable OBJECT-TYPE SYNTAX SEQUENCE OF CLGuestLanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the GLAN configuration sent by the controller to the APs for their operation. LWAPP APs exchange configuration messages with the controller and get the required configuration for their 802.11 related operations. As part of these messages, the GLAN configuration is pushed by the controller to the LWAPP APs. This table doesn't have any dependencies on other existing tables. By defining cLGuestLanIndex, the unique identifier for a GLAN, this table provides a common index structure for use in several other new tables that populate information on security related attributes like authentication, encryption, 802.11 parameters, Quality-of-Service attributes etc., that would relate to a particular GLAN. Rows are added or deleted by explicit management actions initiated by the user from a network management station through the cLRlanRowStatus object." ::= { ciscoLwappGuestLanConfig 1 } cLGuestLanEntry OBJECT-TYPE SYNTAX CLGuestLanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents the GLAN configuration sent by the controller to APs for use during their operations. entries can be added/deleted by explicit management actions by Prime or by user console." INDEX { cLGuestLanIndex } ::= { cLGuestLanTable 1 } CLGuestLanEntry ::= SEQUENCE { cLGuestLanIndex Unsigned32, cLGuestLanRowStatus RowStatus, cLGuestLanProfileName SnmpAdminString, cLGuestLanHasWiredVlan INTEGER, cLGuestLanWiredVlan Unsigned32, cLGuestLanAuthenticationList SnmpAdminString, cLGuestLanAuthorizationList SnmpAdminString, cLGuestLanSecurityWebAuth TruthValue, cLGuestLanWebAuthParameter SnmpAdminString, cLGuestLanClientLimit Unsigned32, cLGuestLanStatus TruthValue, cLGuestLanMdnsMode INTEGER } cLGuestLanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies one instance of a GLAN on the controller." ::= { cLGuestLanEntry 1 } cLGuestLanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and used to create, modify and delete specific instances of rows in this table. This table supports modification of writable objects when the RowStatus is 'active'. The following objects are mandatory for successful creation of an entry: cLGuestLanIndex cLGuestLanProfileName." ::= { cLGuestLanEntry 2 } cLGuestLanProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Profile name associated to the guest lan. This object uniquely identifies one instance of a GLAN on the controller." ::= { cLGuestLanEntry 3 } cLGuestLanHasWiredVlan OBJECT-TYPE SYNTAX INTEGER { withoutWiredVlan(1), withWiredVlan(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if the GLAN has a wired VLAN number configured and it is a mandatory attribute. It must be set to 'withWiredVlan' on the foreign controller, and to 'withoutWiredVlan' on the anchor controller." ::= { cLGuestLanEntry 4 } cLGuestLanWiredVlan OBJECT-TYPE SYNTAX Unsigned32 (1..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the VLAN number associated to the GLAN. This must be configured only on the foreign controller; it must be left unconfigured on the anchor controller." ::= { cLGuestLanEntry 5 } cLGuestLanAuthenticationList OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " This object is a name of the authentication list. It is a name associated to an authentication method that that can be local or remote." ::= { cLGuestLanEntry 6 } cLGuestLanAuthorizationList OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is a name of the authorization list. It is a name associated to an authentication method that that can be local or remote." ::= { cLGuestLanEntry 7 } cLGuestLanSecurityWebAuth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if the web authentication is enabled or not for the GLAN. A value of 'true' indicates that web authentication is enabled. A value of 'false' indicates that web authentication is disabled." ::= { cLGuestLanEntry 8 } cLGuestLanWebAuthParameter OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Web authentication (WebAuth) is Layer 3 security. It allows for user-friendly security that works on any station that runs a browser. This object specifies the L3 paramater of the Web Authentication for the guest LAN" ::= { cLGuestLanEntry 9 } cLGuestLanClientLimit OBJECT-TYPE SYNTAX Unsigned32 (1..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum number of clients that can be hosted" ::= { cLGuestLanEntry 10 } cLGuestLanStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the admin status of the lan status, if it is shutdown or active. A value of 'true' indicates that the guest lan is active. A value of 'false' indicates that the guest lan is shutdown." ::= { cLGuestLanEntry 11 } cLGuestLanMdnsMode OBJECT-TYPE SYNTAX INTEGER{ bridge(0), drop(1), gateway(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the possible mDNS mode of the Guest Lan 0 indicates GLAN is in Bridge mode for mDNS packets. bridges all the mDNS packets to the anchor. 1 indicates GLAN is is Drop mode for mDNS packets. Drops all the mDNS packects. 2 indicates GLAN is in Gateway mode for mDNS packets The controller is handling the mDNS packets." DEFVAL { bridge } ::= { cLGuestLanEntry 12 } -- ******************************************************************** -- GUEST LAN map profile to policy configuration -- ******************************************************************** cLGuestLanProfileToPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF CLGuestLanProfileToPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the association between a profile name and a policy name." ::= { ciscoLwappGuestLanConfig 2 } cLGuestLanProfileToPolicyEntry OBJECT-TYPE SYNTAX CLGuestLanProfileToPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is defining the association between a mapping name and a profile name." INDEX { cLGuestLanMapName, clGuestLanMapGuestLanProfileName } ::= { cLGuestLanProfileToPolicyTable 1 } CLGuestLanProfileToPolicyEntry ::= SEQUENCE { cLGuestLanMapName SnmpAdminString, clGuestLanMapGuestLanProfileName SnmpAdminString, cLGuestLanMapProfileToPolicyRowStatus RowStatus, clGuestLanMapPolicyProfileName SnmpAdminString } cLGuestLanMapName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies one instance of a guest lan map on the controller." ::= { cLGuestLanProfileToPolicyEntry 1 } clGuestLanMapGuestLanProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the name of the guest lan.." ::= { cLGuestLanProfileToPolicyEntry 2 } cLGuestLanMapProfileToPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and used to create, modify and delete specific instances of rows in this table. This table supports modification of writable objects when the RowStatus is 'active'." ::= { cLGuestLanProfileToPolicyEntry 3 } clGuestLanMapPolicyProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The object identifies the policy profile associated to the guest lan profile." ::= { cLGuestLanProfileToPolicyEntry 4 } -- ******************************************************************** -- GUEST LAN map object configuration -- ******************************************************************** cLGuestLanGuestLanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CLGuestLanGuestLanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the guest lan map object. only one instance is allowed for the moment." ::= { ciscoLwappGuestLanConfig 3 } cLGuestLanGuestLanMapEntry OBJECT-TYPE SYNTAX CLGuestLanGuestLanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table will specify the map name for mapping of guest lan policies and policy profiles." INDEX { cLGuestLanGuestLanMapName } ::= { cLGuestLanGuestLanMapTable 1 } CLGuestLanGuestLanMapEntry ::= SEQUENCE { cLGuestLanGuestLanMapName SnmpAdminString, cLGuestLanGuestLanMapRowStatus RowStatus } cLGuestLanGuestLanMapName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..128)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies one instance of a guest lan map on the controller." ::= { cLGuestLanGuestLanMapEntry 1 } cLGuestLanGuestLanMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and used to create, modify and delete specific instances of rows in this table. This table supports modification of writable objects when the RowStatus is 'active'." ::= { cLGuestLanGuestLanMapEntry 2 } -- *************************************************************** -- * Mobile Station Index Table -- *************************************************************** cLGuestLanMobileStationTable OBJECT-TYPE SYNTAX SEQUENCE OF CLGuestLanMobileStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mobile Station Table indexed by cLGuestLanMobileStationMacAddress. (Mobile Station is better referred to as Client in the current releases.)" ::= { ciscoLwappGuestLanConfig 4 } cLGuestLanMobileStationEntry OBJECT-TYPE SYNTAX CLGuestLanMobileStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cLGuestLanMobileStationTable." INDEX { cLGuestLanMobileStationMacAddress } ::= { cLGuestLanMobileStationTable 1 } CLGuestLanMobileStationEntry ::= SEQUENCE { cLGuestLanMobileStationMacAddress MacAddress, cLGuestLanMobileStationIpAddressType InetAddressType, cLGuestLanMobileStationIpAddress InetAddress, cLGuestLanMobileStationUserName SnmpAdminString, clGuestLanMobileStationProfileName SnmpAdminString, cLGuestLanMobileStationAID Unsigned32, cLGuestLanMobileStationStatus INTEGER, cLGuestLanMobileStationReasonCode INTEGER, cLGuestLanMobileStationMobilityStatus INTEGER, cLGuestLanMobileStationAnchorAddressType InetAddressType, cLGuestLanMobileStationAnchorAddress InetAddress, cLGuestLanMobileStationSessionTimeout Unsigned32, cLGuestLanMobileStationAuthenticationAlgorithm INTEGER, cLGuestLanMobileStationDeleteAction INTEGER, cLGuestLanMobileStationPolicyManagerState SnmpAdminString, cLGuestLanMobileStationSecurityPolicyStatus INTEGER, cLGuestLanMobileStationInterface SnmpAdminString, cLGuestLanMobileStationVlanId Unsigned32, cLGuestLanMobileStationPolicyType INTEGER, cLGuestLanMobileStationEncryptionCypher INTEGER, cLGuestLanMobileStationEapType INTEGER, cLGuestLanMobileStationStatusCode Unsigned32, cLGuestLanMobileStationAAAOverridePassphrase TruthValue } cLGuestLanMobileStationMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "802.11 MAC Address of the Mobile Station." ::= { cLGuestLanMobileStationEntry 1 } cLGuestLanMobileStationIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address type of the Mobile Station. The Ip address is limited to ipv4 and ipv6." ::= { cLGuestLanMobileStationEntry 2 } cLGuestLanMobileStationIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the Mobile Station." ::= { cLGuestLanMobileStationEntry 3 } cLGuestLanMobileStationUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "User Name, if any, of the Mobile Station. This should be non empty in the case of Web Authentication and IPSec." ::= { cLGuestLanMobileStationEntry 4 } clGuestLanMobileStationProfileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The SSID Advertised by the Mobile Station." ::= { cLGuestLanMobileStationEntry 5 } cLGuestLanMobileStationAID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "AID for the Mobile Station." ::= { cLGuestLanMobileStationEntry 6 } cLGuestLanMobileStationStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), aaaPending(1), authenticated(2), associated(3), powersave(4), disassociated(5), tobedeleted(6), probing(7), blacklisted(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the Mobile Station." ::= { cLGuestLanMobileStationEntry 7 } cLGuestLanMobileStationReasonCode OBJECT-TYPE SYNTAX INTEGER { unspecified(1), previousAuthNotValid(2), deauthenticationLeaving(3), disassociationDueToInactivity(4), disassociationAPBusy(5), class2FrameFromNonAuthStation(6), class2FrameFromNonAssStation(7), disassociationStaHasLeft(8), staReqAssociationWithoutAuth(9), invalidInformationElement(40), groupCipherInvalid(41), unicastCipherInvalid(42), akmpInvalid(43), unsupportedRsnVersion(44), invalidRsnIeCapabilities(45), cipherSuiteRejected(46), missingReasonCode(99), maxAssociatedClientsReached(101), unSpecifieQosFailure(200), qosPolicyMismatch(201), inSufficientBandwidth(202), inValidQosParams(203) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reason Code as defined in 802.11 standards." ::= { cLGuestLanMobileStationEntry 8 } cLGuestLanMobileStationMobilityStatus OBJECT-TYPE SYNTAX INTEGER { unassociated(0), local(1), anchor(2), foreign(3), handoff(4), unknown(5), exportanchor(6), exportforeign(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mobility Role of the Mobile Station." ::= { cLGuestLanMobileStationEntry 9 } cLGuestLanMobileStationAnchorAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "If the Mobility Status of the Mobile Station is Anchor then it will have Peer Ip Address and will have Anchor IP if the Role is Foreign. The Ip address is limited to ipv4 and ipv6." ::= { cLGuestLanMobileStationEntry 10 } cLGuestLanMobileStationAnchorAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "If the Mobility Status of the Mobile Station is Anchor then it will have Peer Ip Address and will have Anchor IP if the Role is Foreign." ::= { cLGuestLanMobileStationEntry 11 } cLGuestLanMobileStationSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session Timeout of the Mobile station." ::= { cLGuestLanMobileStationEntry 12 } cLGuestLanMobileStationAuthenticationAlgorithm OBJECT-TYPE SYNTAX INTEGER { openSystem(0), sharedKey(1), unknown(2), openAndEap(128) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Algorithm of the Mobile Station." ::= { cLGuestLanMobileStationEntry 13 } cLGuestLanMobileStationDeleteAction OBJECT-TYPE SYNTAX INTEGER { default(0), delete(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action to Deauthenticate the Mobile Station. Set the State to delete." ::= { cLGuestLanMobileStationEntry 14 } cLGuestLanMobileStationPolicyManagerState OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Policy Manager State of the Mobile Station." ::= { cLGuestLanMobileStationEntry 15 } cLGuestLanMobileStationSecurityPolicyStatus OBJECT-TYPE SYNTAX INTEGER { completed(0), notcompleted(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When this attribute has the value completed, it shall indicate that the Mobile Station has completed the security policy checks. Otherwise the checks are yet to be completed." ::= { cLGuestLanMobileStationEntry 16 } cLGuestLanMobileStationInterface OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Interface of the Mobile Station to the switch." ::= { cLGuestLanMobileStationEntry 17 } cLGuestLanMobileStationVlanId OBJECT-TYPE SYNTAX Unsigned32 (0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan ID of the Interface to which the Mobile Station is associated." ::= { cLGuestLanMobileStationEntry 18 } cLGuestLanMobileStationPolicyType OBJECT-TYPE SYNTAX INTEGER { dot1x(0), wpa1(1), wpa2(2), wpa2vff(3), notavailable(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mode of the AP to which the Mobile Station is associated." ::= { cLGuestLanMobileStationEntry 19 } cLGuestLanMobileStationEncryptionCypher OBJECT-TYPE SYNTAX INTEGER { ccmpAes(0), tkipMic(1), wep40(2), wep104(3), wep128(4), none(5), tkipWep40(6), tkipWep104(7), gcmp128(8), gcmp256(9), ccmp256(10), notavailable(11), unknown(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mode of the AP to which the Mobile Station is associated." ::= { cLGuestLanMobileStationEntry 20 } cLGuestLanMobileStationEapType OBJECT-TYPE SYNTAX INTEGER { eapTls(0), ttls(1), peap(2), leap(3), speke(4), eapFast(5), notavailable(6), unknown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "EAP type for the Mobile Station." ::= { cLGuestLanMobileStationEntry 21 } cLGuestLanMobileStationStatusCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Status Code of the Mobile Station." ::= { cLGuestLanMobileStationEntry 22 } cLGuestLanMobileStationAAAOverridePassphrase OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag to check wheather AAA override passphrase is enabled for a MAB+PSK client or not." ::= { cLGuestLanMobileStationEntry 23 } -- ******************************************************************** -- * Notifications -- ******************************************************************** cLGuestLanAllAnchorsDown NOTIFICATION-TYPE OBJECTS { cLGuestLanProfileName, clGuestLanMapPolicyProfileName } STATUS current DESCRIPTION "This notification will be emitted by the SNMP agent, when successive EoIP ping attempts to all the anchors on GuestLan, denoted by cLGuestLanProfileName, fails and all the anchors are conclusively down." ::= { ciscoLwappGuestLanMIBNotifs 1 } cLGuestLanOneAnchorOnGuestLanUp NOTIFICATION-TYPE OBJECTS { cLGuestLanProfileName, clGuestLanMapPolicyProfileName } STATUS current DESCRIPTION "This notification will be emitted by the SNMP agent, when successive EoIP and UDP ping to at least one anchor on the GuestLan, denoted by cLGuestLanProfileName, is restored and anchor is conclusively up." ::= { ciscoLwappGuestLanMIBNotifs 2 } --******************************************************************* --* END OF - NOTIFICATIONS --******************************************************************* -- ******************************************************************** -- * Compliance statements -- ******************************************************************** ciscoLwappGuestLanCompliances OBJECT IDENTIFIER ::= { ciscoLwappGuestLanConform 1 } ciscoLwappGuestLanMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappGuestLanConform 2 } ciscoLwappGuestLanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SNMP entities that implement the ciscoLwappGuestLanMIB module." MODULE -- this module MANDATORY-GROUPS { ciscoLwappGuestLanConfigGroup, ciscoLwappGuestLanNotifsGroup } ::= { ciscoLwappGuestLanCompliances 1 } --******************************************************************* --* Units of conformance --******************************************************************* ciscoLwappGuestLanConfigGroup OBJECT-GROUP OBJECTS { cLGuestLanRowStatus, cLGuestLanProfileName, cLGuestLanHasWiredVlan, cLGuestLanWiredVlan, cLGuestLanAuthenticationList, cLGuestLanAuthorizationList, cLGuestLanSecurityWebAuth, cLGuestLanWebAuthParameter, cLGuestLanClientLimit, cLGuestLanStatus, cLGuestLanGuestLanMapRowStatus, cLGuestLanMapProfileToPolicyRowStatus, clGuestLanMapPolicyProfileName, cLGuestLanMdnsMode, cLGuestLanMobileStationIpAddressType, cLGuestLanMobileStationIpAddress, cLGuestLanMobileStationUserName, clGuestLanMobileStationProfileName, cLGuestLanMobileStationAID, cLGuestLanMobileStationStatus, cLGuestLanMobileStationReasonCode, cLGuestLanMobileStationMobilityStatus, cLGuestLanMobileStationAnchorAddressType, cLGuestLanMobileStationAnchorAddress, cLGuestLanMobileStationSessionTimeout, cLGuestLanMobileStationAuthenticationAlgorithm, cLGuestLanMobileStationDeleteAction, cLGuestLanMobileStationPolicyManagerState, cLGuestLanMobileStationSecurityPolicyStatus, cLGuestLanMobileStationInterface, cLGuestLanMobileStationVlanId, cLGuestLanMobileStationPolicyType, cLGuestLanMobileStationEncryptionCypher, cLGuestLanMobileStationEapType, cLGuestLanMobileStationStatusCode, cLGuestLanMobileStationAAAOverridePassphrase } STATUS current DESCRIPTION "This collection of objects represents the GLAN policy attributes." ::= { ciscoLwappGuestLanMIBGroups 1 } ciscoLwappGuestLanNotifsGroup NOTIFICATION-GROUP NOTIFICATIONS { cLGuestLanAllAnchorsDown, cLGuestLanOneAnchorOnGuestLanUp } STATUS current DESCRIPTION "This is a collection of notifications about the general functional behavior of Guest LAN on WLAN controllers." ::= { ciscoLwappGuestLanMIBGroups 2 } END