-- ******************************************************************* -- CISCO-LWAPP-CLOUD-SERVICES-MIB.my -- Feb 2017, Leelaram Paspulati. -- -- Copyright(c) 2017-2018 by Cisco Systems Inc. -- All rights reserved. -- ******************************************************************* CISCO-LWAPP-CLOUD-SERVICES-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF MacAddress, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB ciscoMgmt FROM CISCO-SMI; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** ciscoLwappCloudServicesMIB MODULE-IDENTITY LAST-UPDATED "201807030000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB provides configuration of Network Assurance (NA) ,Connected Mobility Experience (CMX) and Data Externalization(dx) which comes under Cloud services. Network Assurance (NA) Its a cloud based Assurance which provided by Cisco to monitor the health of the network by collecting data from controllers and Sensors. Connected Mobility Experience (CMX) The MIB is used for programming Cloud based CMX services. The Network Mobility Service Protocol(NMSP) data is exported to CMX Cloud Server through https connection. The NMSP encoding will remain as it is for the TCP/TLS connection. Use the MIB for configuring URL and Token ID and to enable this serrvice. The Controller will act as https client and will establish https connection with CMX URL. Controller will verify the CMX cloud server while the cloud server will authenticate the Controller using the configured id-token. Data Externalization(dx) dx is a feature in wlc which allows it to collect the data which may get published to the NA server for analaytics. The relationship between CC, NA server and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC +.....+ NA + + + + + + + +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +..........+ + + + + + + + + + AP + + AP + + AP +......+ SENSOR + + + + + + + + AP + +......+ +......+ +......+ +..........+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Sensors These are wireless clients which periodically connect to a wireless network, run some tests and report back the test status to Cisco Network Assurance Server. The sensors are controlled and instructed by the Network Assurance server. APs can be tentatively put in Sensor mode to do the Sensor Job. There can be dedicated sensors as well. Filtered Channels ( FC ) These are user-defined channels which use the filters configured by the user to choose and carry the required data." REVISION "201807030000Z" DESCRIPTION "Added cLCSNAServerResetSubscriptions, cLCSWebhookResetSubscriptions, clCSCMXOnPremisesEnable Added cLCSTelemetryFCTable, cLCSTelemetryFCFilterTable, cLCSNAServerChannelTable, cLCSWebhookChannelTable, clCSTelemetryConfigGroup, clCSNAGlobalConfigGroupRev2, clCSWebhookConfigGroupRev1, clCSCMXConfigGroupRev1 Deprecated clCSNAServerOnchangeEnable, clCSNAServerSyncInterval, clCSNAServerSubscriptionAction, clCSNAServerSubscriptionTopic, clCSNAGlobalConfigGroupRev1, clCSWebhookConfigGroup, clCSCMXConfigGroup" REVISION "201804240000Z" DESCRIPTION "Added clCSNAServerOnchangeEnable, clCSNAServerSyncInterval, clCSNAServerSubscriptionAction, clCSNAServerSubscriptionTopic Added clCSMIBComplianceRev2, clCSNAGlobalConfigGroupRev1, clCSWebhookConfigGroup Deprecated clCSNAASIEnable, clCSNADiffSyncEnable, clCSNAGlobalConfigGroup, clCSMIBComplianceRev1" REVISION "201712210000Z" DESCRIPTION "Updated clCSNAGlobalConfigGroup. Deprecate clCSMIBCompliance and replaced by clCSMIBComplianceRev1. Added clCSNAASIEnable,clCSNADiffSyncEnable,clCSSecTunObjects, clCSSecTunConfig,clCSSecTunInfo,clCSSecTunNotifs." REVISION "201702220000Z" DESCRIPTION "Initial version of config cloud services MIB module." ::= { ciscoMgmt 838 } clCSMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappCloudServicesMIB 0 } clCSNANotifs OBJECT IDENTIFIER ::= { clCSMIBNotifs 0 } clCSSecTunNotifs OBJECT IDENTIFIER ::= { clCSMIBNotifs 1 } clCSMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappCloudServicesMIB 1 } clCSNAObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 1 } clCSNAServerConfig OBJECT IDENTIFIER ::= { clCSNAObjects 1 } clCSNAGlobalConfig OBJECT IDENTIFIER ::= { clCSNAObjects 2 } clCSNATrapMgmtObjects OBJECT IDENTIFIER ::= { clCSNAObjects 3 } clCSNAServerConfigTable OBJECT IDENTIFIER ::= { clCSNAObjects 4 } clCSDXObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 2 } clCSDxConfig OBJECT IDENTIFIER ::= { clCSDXObjects 1 } clCSCMXObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 3 } clCSCMXServerConfig OBJECT IDENTIFIER ::= { clCSCMXObjects 1 } clCSCMXConfig OBJECT IDENTIFIER ::= { clCSCMXObjects 2 } clCSSecTunObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 4 } clCSSecTunConfig OBJECT IDENTIFIER ::= { clCSSecTunObjects 1 } clCSSecTunInfo OBJECT IDENTIFIER ::= { clCSSecTunObjects 2 } clCSWebhookGlobalObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 5 } clCSWebhookTableObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 6 } clCSFilterChanTableObjects OBJECT IDENTIFIER ::= { clCSMIBObjects 7 } clCSMIBConform OBJECT IDENTIFIER ::= { ciscoLwappCloudServicesMIB 2 } -- **************************************************** -- cisco LWAPP network assurance server configuration -- **************************************************** clCSNAServerUrl OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the URL for network assurance server." DEFVAL { "" } ::= { clCSNAServerConfig 1 } clCSNAServerIdToken OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the token id for network assurance server." DEFVAL { "" } ::= { clCSNAServerConfig 2 } clCSNAServerOnchangeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the type of telemetry data that will be externalized from the controller. The type can be bulk or onChange. With onChange enabled, NA server will receive only the change in data. With onChange disabled, NA server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSNAServerOnchangeEnable object is superseded by clCSNAServerChannelOnChangeMode." DEFVAL { false } ::= { clCSNAServerConfig 3 } clCSNAServerSyncInterval OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the frequency at which the telemetry data would be received at the NA server. fixed - The controller will provide the telemetry data once in every 5 minutes adaptive - The controller will provide the telemetry data once in every 30 seconds clCSNAServerSyncInterval object is superseded by clCSNAServerChannelSyncInterval." DEFVAL { fixed } ::= { clCSNAServerConfig 4 } clCSNAServerSubscriptionAction OBJECT-TYPE SYNTAX INTEGER { add(1), remove(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the possible modifications to the data content in the telemetry stream sent to the NA server. add - will add the specified channel to the telemetry data stream remove - will remove the specified channel from the telemetry data stream clCSNAServerSubscriptionAction object is superseded by clCSNAServerChannelRowStatus." DEFVAL { add } ::= { clCSNAServerConfig 5 } clCSNAServerSubscriptionTopic OBJECT-TYPE SYNTAX BITS { system(0), network(1), client(2), ap(3), rogue(4), interferer(5), apEvent(6), clientEvent(7), scanReport(8), clientDnsReport(9), fra(10), mapserver(11) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the channels that can be modified in the telemetry data stream that is sent to the NA server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel apEvent(6) - Configures the ap-event channel clientEvent(7) - Configures the client-event channel scanReport(8) - Configures the scan-report channel clientDnsReport(9) - Configures the client-dns-report channel fra(10) - Configures the fra channel mapserver(11) - Configures the mapserver channel clCSNAServerSubscriptionTopic object is superseded by clCSNAServerChannelName ." ::= { clCSNAServerConfig 6 } cLCSNAServerResetSubscriptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specfies the option to reset NA server channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'." DEFVAL { false } ::= { clCSNAServerConfig 7 } cLCSNAServerChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSNAServerChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents NA server subscription channel related configurations." ::= { clCSNAServerConfigTable 1 } cLCSNAServerChannelEntry OBJECT-TYPE SYNTAX CLCSNAServerChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents and includes the attributes needed for subscribing a NA server channel" INDEX { clCSNAServerChannelName } ::= { cLCSNAServerChannelTable 1 } CLCSNAServerChannelEntry ::= SEQUENCE { clCSNAServerChannelName SnmpAdminString, clCSNAServerChannelSyncInterval INTEGER, clCSNAServerChannelOnChangeMode TruthValue, clCSNAServerIsFilterChannel TruthValue, clCSNAServerChannelRowStatus RowStatus } clCSNAServerChannelName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the NA server channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'scan-reports': This value indicates scan-reports channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel. : User can also specify filter channel name to subscribe" ::= { cLCSNAServerChannelEntry 1 } clCSNAServerChannelSyncInterval OBJECT-TYPE SYNTAX INTEGER { fifteen(15), thirty(30), sixty(60), threehundred(300) } UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the NA server channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval. This object can't be used to set interval for filter-channels." ::= { cLCSNAServerChannelEntry 2 } clCSNAServerChannelOnChangeMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the value of on-change mode of a NA server channel. Only the changed data is synced if it's enabled. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced. This object can't be used to set on-change mode for filter-channels." ::= { cLCSNAServerChannelEntry 3 } clCSNAServerIsFilterChannel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents whether the given channel is filter channel or static channel. A value of 'true' indicates that the channel is filter channel A value of 'false' indicates that the channel is static channel" DEFVAL { false } ::= { cLCSNAServerChannelEntry 4 } clCSNAServerChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLCSNAServerChannelEntry 5 } -- ********************************************************* -- cisco LWAPP network Telemetry Filter channel configuration -- ********************************************************* cLCSTelemetryFCTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSTelemetryFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents telemetry filter channel related configurations. Filter channel is a user created channel which uses filters added by user to externalize the data." ::= { clCSFilterChanTableObjects 1 } cLCSTelemetryFCEntry OBJECT-TYPE SYNTAX CLCSTelemetryFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents the attributes needed for managing a filter channel." INDEX { clCSTelemetryFCName } ::= { cLCSTelemetryFCTable 1 } CLCSTelemetryFCEntry ::= SEQUENCE { clCSTelemetryFCName SnmpAdminString, clCSTelemetryFCParent SnmpAdminString, clCSTelemetryFCSubStatus INTEGER, clCSTelemetryFCFilterCount Unsigned32, clCSTelemetryFCRowStatus RowStatus } clCSTelemetryFCName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the name of filter channel." ::= { cLCSTelemetryFCEntry 1 } clCSTelemetryFCParent OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the name of parent channel to which the filter channel belongs. Parent channel should be a static channel." ::= { cLCSTelemetryFCEntry 2 } clCSTelemetryFCSubStatus OBJECT-TYPE SYNTAX INTEGER { none(1), assurance(2), webhook(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents whether the filter channel is subscribed or not. none(1): This value indicates that filter channel is not subscribed. assurance(2): This value indicates that filter channel is subscribed to assurance. webhook(3): This value indicates that filter channel is subscribed to webhook." DEFVAL { none } ::= { cLCSTelemetryFCEntry 3 } clCSTelemetryFCFilterCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of filters configured on this filter channel." DEFVAL { 0 } ::= { cLCSTelemetryFCEntry 4 } clCSTelemetryFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLCSTelemetryFCEntry 5 } cLCSTelemetryFCFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSTelemetryFCFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents all the filters configured on the filter channels." ::= { clCSFilterChanTableObjects 2 } cLCSTelemetryFCFilterEntry OBJECT-TYPE SYNTAX CLCSTelemetryFCFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents the attributes needed for managing the filters of a perticular filter channel" INDEX { clCSTelemetryFCName, clCSTelemetryFCFilter } ::= { cLCSTelemetryFCFilterTable 1 } CLCSTelemetryFCFilterEntry ::= SEQUENCE { clCSTelemetryFCFilter SnmpAdminString, clCSTelemetryFCFilterRowStatus RowStatus } clCSTelemetryFCFilter OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the filters of a given filter channel. Filter channel extracts the data from parent channel based on the provided filters." ::= { cLCSTelemetryFCFilterEntry 1 } clCSTelemetryFCFilterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLCSTelemetryFCFilterEntry 2 } -- ********************************************************* -- cisco LWAPP network assurance Global configuration -- ********************************************************* clCSNAEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether network assurance is enabled or disabled. A value of 'true' indicates that enables network assurance. A value of 'false' indicates that disables network assurance." DEFVAL { true } ::= { clCSNAGlobalConfig 1 } clCSNASensorBackhaulSSID OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the SSID for network assurance sensor backhaul." DEFVAL { "" } ::= { clCSNAGlobalConfig 2 } clCSNASensorBackhaulAuthType OBJECT-TYPE SYNTAX INTEGER { dot1x(1), psk(2), open(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about authentication type of network assurance sensor backhaul. dot1x(1): This value represents the authentication type as dot1x. psk(2): This value represents the authentication type as psk. open(3): This value represents the authentication type as open." DEFVAL { open } ::= { clCSNAGlobalConfig 3 } clCSNASensorBackhaulEapType OBJECT-TYPE SYNTAX INTEGER { eapfast(1), peap(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about Extensible Authentication Protocol (EAP) type of network assurance sensor backhaul. eapfast(1): This value represents the EAP type as eapfast. peap(2): This value represents the EAP type as peap. none(3): This value represents the EAP type as none." DEFVAL { none } ::= { clCSNAGlobalConfig 4 } clCSNASensorBackhaulUsername OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about the username for dot1x type authentication type of cloud services sensor backhaul." DEFVAL { "" } ::= { clCSNAGlobalConfig 5 } clCSNASensorBackhaulPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about the password for dot1x authentication type of network assurance sensor backhaul." DEFVAL { "" } ::= { clCSNAGlobalConfig 6 } clCSNASensorBackhaulPskMode OBJECT-TYPE SYNTAX INTEGER { ascii(1), hex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about the psk mode for psk authentication type of network assurance for sensor backhaul. ascii(1): This value represents psk mode as ascii. hex(2):This value represents psk mode as hex." DEFVAL { ascii } ::= { clCSNAGlobalConfig 7 } clCSNASensorBackhaulPsk OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies about the psk value for psk authentication type of network assurance for sensor backhaul." DEFVAL { "" } ::= { clCSNAGlobalConfig 8 } clCSNAASIEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether Network Assurance Adaptive Sync Interval (ASI) mode is enabled or disabled. A value of 'true' indicates that Network Assurance ASI mode is enabled. A value of 'false' indicates that network assurance ASI mode is disabled." DEFVAL { false } ::= { clCSNAGlobalConfig 9 } clCSNADiffSyncEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies whether Network Assurance diff sync is enabled or disabled. In diff sync mode only modified parameters are externalized from the controller. A value of 'true' indicates that network assurance diff sync mode is enabled. A value of 'false' indicates that network assurance diff sync mode is disabled." DEFVAL { false } ::= { clCSNAGlobalConfig 10 } -- **************************************************** -- cisco DX configuration -- **************************************************** clCSDxMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether data externalization is enabled or disabled. A value of 'true' indicates that enables DX. A value of 'false' indicates that disables DX. It requires reboot after enable" DEFVAL { false } ::= { clCSDxConfig 1 } -- ************************************************************ -- cisco LWAPP cloud services server configuration -- ************************************************************ clCSCMXServerUrl OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the URL for cloud services server." DEFVAL { "" } ::= { clCSCMXServerConfig 1 } clCSCMXServerIdToken OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the token id for cloud services server." DEFVAL { "" } ::= { clCSCMXServerConfig 2 } -- ********************************************************* -- cisco LWAPP cloud services CMX configuration -- ********************************************************* clCSCMXEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether cloud services for CMX is enabled or disabled. A value of 'true' indicates that cloud services enables for CMX. A value of 'false' indicates that cloud services disables for CMX." DEFVAL { false } ::= { clCSCMXConfig 1 } clCSCMXOnPremisesEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether NMSP service for on-premises CMX is enabled or disabled. A value of 'true' indicates that NMSP service is enabled for on-premises CMX. A value of 'false' indicates that NMSP service is disabled for on-premises CMX." DEFVAL { true } ::= { clCSCMXConfig 2 } -- ************************************************************ -- cisco LWAPP Secure tunnel configuration - clCSSecTunConfig -- ************************************************************ clCSSecTunEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of secure tunnel mode on the controller. A value of 'true' indicates that, secure tunnel is enabled. A value of 'false' indicates that, secure tunnel is disabled." DEFVAL { false } ::= { clCSSecTunConfig 1 } clCSSecTunTlsGwFqdn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Fully Qualified Domain Name(FQDN) of the TLS Gateway with which secure tunnel is established." DEFVAL { "" } ::= { clCSSecTunConfig 2 } clCSSecTunTlsGwIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the TLS Gateway IP address type." ::= { clCSSecTunConfig 3 } clCSSecTunTlsGwIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the IP address of the TLS Gateway with which secure tunnel is established." ::= { clCSSecTunConfig 4 } clCSSecTunTlsGwPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the TLS Gateway port number." DEFVAL { 0 } ::= { clCSSecTunConfig 5 } clCSSecTunPskId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the PSK Id for the given WLC. Id along with clCSSecTunPskKey are used as part of secure tunnel setup with TLS gateway." DEFVAL { "" } ::= { clCSSecTunConfig 6 } clCSSecTunPskKey OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the key of the PSK cipher, which is used while setting up the secure tunnel with TLS gateway" DEFVAL { "" } ::= { clCSSecTunConfig 7 } clCSSecTunRadiusEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the secure tunneling status of RADIUS traffic like Authentication and Accounting servers. A value of 'true' indicates that, RADIUS traffic on secure tunnel is enabled. A value of 'false' indicates that, RADIUS traffic on secure tunnel is disabled." DEFVAL { false } ::= { clCSSecTunConfig 8 } clCSSecTunSnmpTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the secure tunneling trap is enabled or disabled. A value of 'true' indicates that secure tunnel status trap is enabled. A value of 'false' indicates that secure tunnel status trap is disabled." DEFVAL { false } ::= { clCSSecTunConfig 9 } cLCSSecTunStaticNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSSecTunStaticNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents static Networks configured for Secure tunneling of it's traffic. This is the explicit way of configuration to send traffic of a given network over TLS secure tunnel" ::= { clCSSecTunConfig 10 } cLCSSecTunStaticNetworkEntry OBJECT-TYPE SYNTAX CLCSSecTunStaticNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents the attributes of secure tunnel network." INDEX { cLSCSecTunNetworkIPAddressType, cLSCSecTunNetworkIPAddress, cLSCSecTunNetworkIPNetmaskType, cLSCSecTunNetworkIPNetmask } ::= { cLCSSecTunStaticNetworkTable 1 } CLCSSecTunStaticNetworkEntry ::= SEQUENCE { cLSCSecTunNetworkIPAddressType InetAddressType, cLSCSecTunNetworkIPAddress InetAddress, cLSCSecTunNetworkIPNetmaskType InetAddressType, cLSCSecTunNetworkIPNetmask InetAddress, cLSCSecTunNetworkRowStatus RowStatus } cLSCSecTunNetworkIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the IP address type of cLSCSecTunNetworkIPAddress." ::= { cLCSSecTunStaticNetworkEntry 1 } cLSCSecTunNetworkIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the IP address or subnet of the network to be added for secure tunneling" ::= { cLCSSecTunStaticNetworkEntry 2 } cLSCSecTunNetworkIPNetmaskType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies IP netmask type of cLSCSecTunNetworkIPNetmask." ::= { cLCSSecTunStaticNetworkEntry 3 } cLSCSecTunNetworkIPNetmask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the IP netmask of the network added for secure tunneling." ::= { cLCSSecTunStaticNetworkEntry 4 } cLSCSecTunNetworkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies status column for this row and used to create and delete specific instances of rows in this table." ::= { cLCSSecTunStaticNetworkEntry 5 } -- ************************************************************ -- cisco LWAPP Secure tunnel information - clCSSecTunConfig -- ************************************************************ clCSSecTunCurrentState OBJECT-TYPE SYNTAX INTEGER { secureTunnelDown(1), secureTunnelUp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the current state of the secure tunnel. secureTunnelDown(1): This value indicates that secure tunnel is down. secureTunnelUp(2): This values indicates that secure tunnel is up." DEFVAL { secureTunnelDown } ::= { clCSSecTunInfo 1 } clCSSecTunTlsGwIpAddrInUseType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This objects represents the TLS Gateway IP address type" ::= { clCSSecTunInfo 2 } clCSSecTunTlsGwIpInUseAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the IP address of the TLS Gateway which is currently in-use. User can configure FQDN or IP address for TLS Gateway. The preference is to resolve the FQDN and get the IP address, if that fails it will use the statically configured IP address." ::= { clCSSecTunInfo 3 } clCSSecTunInnerIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This objects represents the IP address type of the TLS client." ::= { clCSSecTunInfo 4 } clCSSecTunInnerIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the inner IP address of the TLS client on the controller. This IP is issued by TLS gateway as part of the secure tunnel setup and informed to TLS client as config update." ::= { clCSSecTunInfo 5 } clCSSecTunTLSClientProcState OBJECT-TYPE SYNTAX INTEGER { tlscProcDown(1), tlscProcInProg(2), tlscProcUp(3), tlscProcReStart(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of the TLS Client process. TLS Client process is responsible in establishing TLS tunnel with the Gateway. It encapsulates the data packets before sending them to the Gateway over the tunnel. tlscProcDown(1): This value indicates that the process is down, tlscProcInProg(2): This value indicates that the process is just coming up and is in-progress. tlscProcUp(3): This value indicates that the process is up and running. tlscProcReStart(4): This value indicates that the process is in restart." DEFVAL { tlscProcDown } ::= { clCSSecTunInfo 6 } cLCSSecTunRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSSecTunRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the routes for various devices and networks currently managed by the secure tunnel module for tunneling of the management traffic. Plumbing and deletion of the routes to linux occurs based on the tunnel state changes." ::= { clCSSecTunInfo 7 } cLCSSecTunRouteEntry OBJECT-TYPE SYNTAX CLCSSecTunRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents attributes needed for adding a route for secure tunneling" INDEX { cLSCSecTunRouteIPAddressType, cLSCSecTunRouteIPAddress, cLSCSecTunRouteNetmaskType, cLSCSecTunRouteNetmask } ::= { cLCSSecTunRouteTable 1 } CLCSSecTunRouteEntry ::= SEQUENCE { cLSCSecTunRouteIPAddressType InetAddressType, cLSCSecTunRouteIPAddress InetAddress, cLSCSecTunRouteNetmaskType InetAddressType, cLSCSecTunRouteNetmask InetAddress, cLSCSecTunRouteTableRowStatus Unsigned32 } cLSCSecTunRouteIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the IP address type of cLSCSecTunRouteIPAddress." ::= { cLCSSecTunRouteEntry 1 } cLSCSecTunRouteIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the IP address or subnet of the route to be added for secure tunneling" ::= { cLCSSecTunRouteEntry 2 } cLSCSecTunRouteNetmaskType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents IP netmask type of cLSCSecTunNetworkIPNetmask." ::= { cLCSSecTunRouteEntry 3 } cLSCSecTunRouteNetmask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the IP netmask of the route to be added for secure tunneling." ::= { cLCSSecTunRouteEntry 4 } cLSCSecTunRouteTableRowStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the entry status of this conceptual row." ::= { cLCSSecTunRouteEntry 5 } -- **************************************************** -- cisco LWAPP network webhook server configuration -- **************************************************** clCSWebhookUrl OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the URL for the webhook server" DEFVAL { "" } ::= { clCSWebhookGlobalObjects 1 } clCSWebhookAuthToken OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the authentication token of the webhook server." DEFVAL { "" } ::= { clCSWebhookGlobalObjects 2 } -- ********************************************************* -- cisco LWAPP network webhook Global configuration -- ********************************************************* clCSWebhookEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the state of the controller telemetry data externalization to the webhook server. A value of 'true' indicates that externalization to the webhook server is enabled. A value of 'false' indicates that externalization to the webhook server is disabled" DEFVAL { false } ::= { clCSWebhookGlobalObjects 3 } clCSWebhookOnchangeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the type of telemetry data that will be externalized. The type can be bulk or onChange. With onChange enabled, the server will receive only the change in data. With onChange disabled, the server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSWebhookOnchangeEnable object is superseded by clCSWebhookChannelOnChangeMode." DEFVAL { false } ::= { clCSWebhookGlobalObjects 4 } clCSWebhookSyncInterval OBJECT-TYPE SYNTAX INTEGER { fixed(1), adaptive(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the frequency at which the telemetry data would be received at the webhook server. A value of fixed will provide data once in every 5 minutes A value of adaptive will provide data once in 30 seconds clCSWebhookSyncInterval object is superseded by clCSWebhookChannelSyncInterval ." DEFVAL { fixed } ::= { clCSWebhookGlobalObjects 5 } clCSWebhookSubscriptionAction OBJECT-TYPE SYNTAX INTEGER { add(1), remove(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the possible modifications to the data content in the telemetry stream sent to the webhook server. add - will add the channel to the telemetry stream remove - will remove the channel from the telemetry stream clCSWebhookSubscriptionAction object is superseded by clCSWebhookChannelRowStatus." DEFVAL { add } ::= { clCSWebhookGlobalObjects 6 } clCSWebhookSubscriptionTopic OBJECT-TYPE SYNTAX BITS { system(0), network(1), client(2), ap(3), rogue(4), interferer(5), mapserver(6) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the channels that can be modified in the telemetry data stream that is sent to the webhook server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel mapserver(6) - Configures the mapserver channel clCSWebhookSubscriptionTopic object is superseded by clCSWebhookChannelName." ::= { clCSWebhookGlobalObjects 7 } cLCSWebhookResetSubscriptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specfies the option to reset webhook channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'." DEFVAL { false } ::= { clCSWebhookGlobalObjects 8 } cLCSWebhookChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF CLCSWebhookChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents Webhook subscription channel related configurations." ::= { clCSWebhookTableObjects 1 } cLCSWebhookChannelEntry OBJECT-TYPE SYNTAX CLCSWebhookChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents and includes the attributes needed for subscribing a webhook channel" INDEX { clCSWebhookChannelName } ::= { cLCSWebhookChannelTable 1 } CLCSWebhookChannelEntry ::= SEQUENCE { clCSWebhookChannelName SnmpAdminString, clCSWebhookChannelSyncInterval INTEGER, clCSWebhookChannelOnChangeMode TruthValue, clCSWebhookChannelRowStatus RowStatus } clCSWebhookChannelName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the webhook channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel." ::= { cLCSWebhookChannelEntry 1 } clCSWebhookChannelSyncInterval OBJECT-TYPE SYNTAX INTEGER { fifteen(15), thirty(30), sixty(60), threehundred(300) } UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the webhook channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval." ::= { cLCSWebhookChannelEntry 2 } clCSWebhookChannelOnChangeMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the value of on-change mode of a webhook server channel. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced." ::= { cLCSWebhookChannelEntry 3 } clCSWebhookChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is the status column for this row and is used to create and delete specific instances of rows in this table." ::= { cLCSWebhookChannelEntry 4 } -- **************************************************** -- Objects for Notifications -- **************************************************** clCSNASensorLradMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents the AP mac adress of the sensor." ::= { clCSNATrapMgmtObjects 1 } clCSNASensorStatus OBJECT-TYPE SYNTAX INTEGER { wsaNoUpdate(1), wsaStatusOk(2), wsaServerUrlNotReachable(3), wsaServerwrongIdToken(4), wsaServerProxyNotReachable(5), wsaSensorIntf24Error(6), wsaSensorIntf24ProxyError(7), wsaSensorIntf50Error(8), wsaSensorIntf50ProxyError(9), wsaApLicenseDenied(10), wsaNAServerUnreachable(11), wsaAttemptAssocToRoot(12), wsaAssocToRoot(13), wsaTestCfgRcvd(14), wsaStatusmax(15) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object specifies Sensor reachablity to NA Server. wsaNoUpdate(1): This value indicated that NA server status as no update. wsaStatusOk(2): This value indicated that NA server status as Reachable. wsaServerUrlNotReachable(3): This value indicated that NA server status as Url not reachable. wsaServerwrongIdToken(4): This value indicated that NA server status as Wrong Id token configured. wsaServerProxyNotReachable(5): This value indicated that NA server status as Proxy server not reachable. wsaSensorIntf24Error(6): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf24ProxyError(7): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50Error(8): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50ProxyError(9): This value indicated that NA server status as Sensor backhaul error. wsaApLicenseDenied(10): This value indicated that NA server status as License denied. wsaNAServerUnreachable(11): This value indicated that NA server status as Cloud server not reachable. wsaAttemptAssocToRoot(12): This value indicated that NA server status as attempeting the assocation. wsaAssocToRoot(13): This value indicated that NA server status as Associated to Root. wsaTestCfgRcvd(14): This value indicated that NA server status as Test coverage Recieved. wsaStatusmax(15): This value indicated that NA server status as Status maximum." ::= { clCSNATrapMgmtObjects 2 } clCSNASensorErrCode OBJECT-TYPE SYNTAX INTEGER { wsaSensorBackhaulWronSsid(1), wsaSensorBackhaulInvalidCredential(2), wsaSensorConnError(3), wsaNAServerNotFound(4), wsaNAServerInternalError(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object represents Sensor conectivity status. wsaSensorBackhaulWronSsid(1): This value indicated that NA server status as Invalid ssid. wsaSensorBackhaulInvalidCredential(2): This value indicated that NA server status as Invalid credentials. wsaSensorConnError(3): This value indicated that NA server status as Sensor connection error. wsaNAServerNotFound(4): This value indicated that NA server status as Server not found-404 wsaNAServerInternalError(5):This value indicated that NA server status as Sensor connection error." ::= { clCSNATrapMgmtObjects 3 } clCSNASensorNotReachableDevStatus NOTIFICATION-TYPE OBJECTS { clCSNASensorLradMacAddr, clCSNASensorStatus, clCSNASensorErrCode } STATUS current DESCRIPTION "This object is used to send a trap whenever the device status moves out of compliance with respect to smart-licensing" ::= { clCSNANotifs 1 } -- **************************************************** -- Objects for secure tunnel notifications -- **************************************************** clCSSecTunStateChange NOTIFICATION-TYPE OBJECTS { clCSSecTunCurrentState } STATUS current DESCRIPTION "This object is used to send secure tunnel status change." ::= { clCSSecTunNotifs 1 } -- ******************************************************************* -- * Compliance statements -- ******************************************************************** clCSMIBCompliances OBJECT IDENTIFIER ::= { clCSMIBConform 1 } clCSMIBGroups OBJECT IDENTIFIER ::= { clCSMIBConform 2 } clCSMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the SNMP entities that implement this MIB." MODULE -- this module MANDATORY-GROUPS { clCSNAServerConfigGroup, clCSNAGlobalConfigGroup, clCSCMXServerConfigGroup, clCSCMXConfigGroup, clCSNATrapGroup, clCSNASensorTrapGroup, clCSDxConfigGroup } ::= { clCSMIBCompliances 1 } clCSMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the SNMP entities that implement this MIB." MODULE -- this module MANDATORY-GROUPS { clCSNAServerConfigGroup, clCSNAGlobalConfigGroup, clCSCMXServerConfigGroup, clCSCMXConfigGroup, clCSNATrapGroup, clCSNASensorTrapGroup, clCSDxConfigGroup, clCSSecTunConfigGroup, clCSSecTunInfoGroup, clCSSecTunNotifsGroup } ::= { clCSMIBCompliances 2 } clCSMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the SNMP entities that implement this MIB." MODULE -- this module MANDATORY-GROUPS { clCSNAServerConfigGroup, clCSNAGlobalConfigGroupRev1, clCSCMXServerConfigGroup, clCSCMXConfigGroup, clCSNATrapGroup, clCSNASensorTrapGroup, clCSDxConfigGroup, clCSSecTunConfigGroup, clCSSecTunInfoGroup, clCSSecTunNotifsGroup, clCSWebhookConfigGroup } ::= { clCSMIBCompliances 3 } clCSMIBComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SNMP entities that implement this MIB." MODULE -- this module MANDATORY-GROUPS { clCSNAServerConfigGroup, clCSNAGlobalConfigGroupRev2, clCSCMXServerConfigGroup, clCSCMXConfigGroupRev1, clCSNATrapGroup, clCSNASensorTrapGroup, clCSDxConfigGroup, clCSSecTunConfigGroup, clCSSecTunInfoGroup, clCSSecTunNotifsGroup, clCSWebhookConfigGroupRev1, clCSTelemetryConfigGroup } ::= { clCSMIBCompliances 4 } -- ******************************************************************** -- * Units of conformance -- ******************************************************************** clCSNAServerConfigGroup OBJECT-GROUP OBJECTS { clCSNAServerUrl, clCSNAServerIdToken } STATUS current DESCRIPTION "This collection of objects represent the configuration of server on the controller to be passed to an LWAPP AP." ::= { clCSMIBGroups 1 } clCSNAGlobalConfigGroup OBJECT-GROUP OBJECTS { clCSNAEnable, clCSNASensorBackhaulSSID, clCSNASensorBackhaulAuthType, clCSNASensorBackhaulEapType, clCSNASensorBackhaulUsername, clCSNASensorBackhaulPassword, clCSNASensorBackhaulPsk, clCSNASensorBackhaulPskMode, clCSNAASIEnable, clCSNADiffSyncEnable } STATUS deprecated DESCRIPTION "This collection of objects represent the configuration of Network Assuranceon the controller to be passed to an LWAPP AP." ::= { clCSMIBGroups 2 } clCSCMXServerConfigGroup OBJECT-GROUP OBJECTS { clCSCMXServerUrl, clCSCMXServerIdToken } STATUS current DESCRIPTION "This collection of objects represent the configuration of Connected Mobility Experience (CMX) server on the controller to be passed to an LWAPP AP." ::= { clCSMIBGroups 3 } clCSCMXConfigGroup OBJECT-GROUP OBJECTS { clCSCMXEnable } STATUS deprecated DESCRIPTION "This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP. clCSCMXConfigGroup object is superseded by clCSCMXConfigGroupRev1." ::= { clCSMIBGroups 4 } clCSDxConfigGroup OBJECT-GROUP OBJECTS { clCSDxMode } STATUS current DESCRIPTION "This collection of objects represent the configuration for data externalization(dx) on the controller to be passed to an LWAPP AP." ::= { clCSMIBGroups 5 } clCSNATrapGroup OBJECT-GROUP OBJECTS { clCSNASensorLradMacAddr, clCSNASensorStatus, clCSNASensorErrCode } STATUS current DESCRIPTION "This collection of objects represent the trap configuration of NA sent by the agent to a network management station." ::= { clCSMIBGroups 6 } clCSNASensorTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { clCSNASensorNotReachableDevStatus } STATUS current DESCRIPTION "This supplemental collection of objects represents the NA related notifications sent by the agent to a network management station." ::= { clCSMIBGroups 7 } clCSSecTunConfigGroup OBJECT-GROUP OBJECTS { clCSSecTunEnable, clCSSecTunTlsGwFqdn, clCSSecTunTlsGwIpAddrType, clCSSecTunTlsGwIpAddr, clCSSecTunTlsGwPort, clCSSecTunPskId, clCSSecTunPskKey, clCSSecTunRadiusEnable, clCSSecTunSnmpTrapEnable, cLSCSecTunNetworkRowStatus } STATUS current DESCRIPTION "This collection of objects represent the secure Tunnel configuration." ::= { clCSMIBGroups 8 } clCSSecTunInfoGroup OBJECT-GROUP OBJECTS { clCSSecTunCurrentState, clCSSecTunTlsGwIpAddrInUseType, clCSSecTunTlsGwIpInUseAddr, clCSSecTunInnerIpAddrType, clCSSecTunInnerIpAddr, clCSSecTunTLSClientProcState, cLSCSecTunRouteTableRowStatus } STATUS current DESCRIPTION "This collection of objects represent the secure Tunnel information." ::= { clCSMIBGroups 9 } clCSSecTunNotifsGroup NOTIFICATION-GROUP NOTIFICATIONS { clCSSecTunStateChange } STATUS current DESCRIPTION "This supplemental collection of objects represents the Secure Tunnel related notifications sent by the agent to a network management station." ::= { clCSMIBGroups 10 } clCSNAGlobalConfigGroupRev1 OBJECT-GROUP OBJECTS { clCSNAEnable, clCSNASensorBackhaulSSID, clCSNASensorBackhaulAuthType, clCSNASensorBackhaulEapType, clCSNASensorBackhaulUsername, clCSNASensorBackhaulPassword, clCSNASensorBackhaulPsk, clCSNASensorBackhaulPskMode, clCSNAServerOnchangeEnable, clCSNAServerSyncInterval, clCSNAServerSubscriptionAction, clCSNAServerSubscriptionTopic } STATUS deprecated DESCRIPTION "This collection of objects represent the configuration of Network Assuranceon the controller to be passed to a Network Assurance Server. clCSNAGlobalConfigGroupRev1 object is superseded by clCSNAGlobalConfigGroupRev2." ::= { clCSMIBGroups 11 } clCSNAGlobalConfigGroupRev2 OBJECT-GROUP OBJECTS { clCSNAEnable, clCSNASensorBackhaulSSID, clCSNASensorBackhaulAuthType, clCSNASensorBackhaulEapType, clCSNASensorBackhaulUsername, clCSNASensorBackhaulPassword, clCSNASensorBackhaulPsk, clCSNASensorBackhaulPskMode, clCSNAServerChannelSyncInterval, clCSNAServerChannelOnChangeMode, clCSNAServerChannelRowStatus, clCSNAServerIsFilterChannel, cLCSNAServerResetSubscriptions } STATUS current DESCRIPTION "This collection of objects represent the configuration of network assurance on the controller to be passed to a network assurance server." ::= { clCSMIBGroups 12 } clCSWebhookConfigGroup OBJECT-GROUP OBJECTS { clCSWebhookUrl, clCSWebhookAuthToken, clCSWebhookEnable, clCSWebhookOnchangeEnable, clCSWebhookSyncInterval, clCSWebhookSubscriptionAction, clCSWebhookSubscriptionTopic } STATUS deprecated DESCRIPTION "This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller clCSWebhookConfigGroup object is superseded by clCSWebhookConfigGroupRev1." ::= { clCSMIBGroups 13 } clCSWebhookConfigGroupRev1 OBJECT-GROUP OBJECTS { clCSWebhookUrl, clCSWebhookAuthToken, clCSWebhookEnable, clCSWebhookChannelSyncInterval, clCSWebhookChannelOnChangeMode, clCSWebhookChannelRowStatus, cLCSWebhookResetSubscriptions } STATUS current DESCRIPTION "This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller" ::= { clCSMIBGroups 14 } clCSCMXConfigGroupRev1 OBJECT-GROUP OBJECTS { clCSCMXEnable, clCSCMXOnPremisesEnable } STATUS current DESCRIPTION "This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP." ::= { clCSMIBGroups 15 } clCSTelemetryConfigGroup OBJECT-GROUP OBJECTS { clCSTelemetryFCParent, clCSTelemetryFCSubStatus, clCSTelemetryFCFilterCount, clCSTelemetryFCRowStatus, clCSTelemetryFCFilterRowStatus } STATUS current DESCRIPTION "This collection of objects represent the configuration of telemetry filter channels." ::= { clCSMIBGroups 16 } END