CISCO-IETF-MPLS-ID-STD-03-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    mplsStdMIB
        FROM MPLS-TC-STD-MIB
    CMplsGlobalId,
    CMplsIccId,
    CMplsNodeId
        FROM CISCO-MPLS-TC-EXT-STD-MIB
    ciscoExperiment
        FROM CISCO-SMI;


cmplsIdStdMIB MODULE-IDENTITY
    LAST-UPDATED    "201206070000Z"
    ORGANIZATION    "Multiprotocol Label Switching (MPLS) Working Group"
    CONTACT-INFO
            "Venkatesan Mahalingam
            Dell Inc,
            350 Holger way, San Jose, CA, USA
            Email: venkat.mahalingams@gmail.com

            Kannan KV Sampath
            Aricent,
            India
            Email: Kannan.Sampath@aricent.com

            Sam Aldrin
            Huawei Technologies
            2330 Central Express Way,
            Santa Clara, CA 95051, USA
            Email:  aldrin.ietf@gmail.com

            Thomas D. Nadeau
            Juniper Networks
            10 Technology Park Drive, Westford, MA 01886
            Email: tnadeau@juniper.net"
    DESCRIPTION
        "Copyright (c) 2012 IETF Trust and the persons identified
        as the document authors.  All rights reserved.

        This MIB module contains generic object definitions for
        MPLS Traffic Engineering in transport networks. This module is a
        cisco-ized version of the IETF draft:
        draft-ietf-mpls-tp-te-mib-03."
    REVISION        "201204080000Z"
    DESCRIPTION
        "MPLS identifiers mib object extension"
    ::= { ciscoExperiment 147 }


-- traps

cmplsIdNotifications  OBJECT IDENTIFIER
    ::= { cmplsIdStdMIB 0 }

-- tables, scalars

cmplsIdObjects  OBJECT IDENTIFIER
    ::= { cmplsIdStdMIB 1 }

-- conformance

cmplsIdConformance  OBJECT IDENTIFIER
    ::= { cmplsIdStdMIB 2 }


-- MPLS common objects

cmplsGlobalId OBJECT-TYPE
    SYNTAX          CMplsGlobalId
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object allows the administrator to assign a unique
        operator identifier also called MPLS-TP Global_ID."
    REFERENCE       "MPLS-TP Identifiers [RFC6370]." 
    ::= { cmplsIdObjects 1 }

cmplsIcc OBJECT-TYPE
    SYNTAX          CMplsIccId
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object allows the operator or service provider to
        assign a unique MPLS-TP ITU-T Carrier Code (ICC) to a
        network."
    REFERENCE       "MPLS-TP Identifiers [RFC6370]." 
    ::= { cmplsIdObjects 2 }

cmplsNodeId OBJECT-TYPE
    SYNTAX          CMplsNodeId
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object allows the operator or service provider to
        assign a unique MPLS-TP Node_ID.

        The Node_ID is assigned within the scope of
        the Global_ID."
    REFERENCE       "MPLS-TP Identifiers [RFC6370]." 
    ::= { cmplsIdObjects 3 }
-- Module compliance.

cmplsIdGroups  OBJECT IDENTIFIER
    ::= { cmplsIdConformance 1 }

cmplsIdCompliances  OBJECT IDENTIFIER
    ::= { cmplsIdConformance 2 }


-- Compliance requirement for fully compliant implementations.

cmplsIdModuleFullCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide full
        support the MPLS-ID-STD-MIB module."
    MODULE          -- this module
    MANDATORY-GROUPS { cmplsIdScalarGroup }
    ::= { cmplsIdCompliances 1 }

-- Compliance requirement for read-only implementations.

cmplsIdModuleReadOnlyCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Compliance statement for agents that provide full
        support the MPLS-ID-STD-MIB module."
    MODULE          -- this module
    MANDATORY-GROUPS { cmplsIdScalarGroup }
    ::= { cmplsIdCompliances 2 }

-- Units of conformance.

cmplsIdScalarGroup OBJECT-GROUP
    OBJECTS         {
                        cmplsGlobalId,
                        cmplsNodeId,
                        cmplsIcc
                    }
    STATUS          current
    DESCRIPTION
        "Scalar object needed to implement MPLS TP path."
    ::= { cmplsIdGroups 1 }

END