-- *****************************************************************
-- CISCO-CAT6k-NAT-STAT-MIB.my
--   
--   
-- Copyright (c) 2019 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-CAT6k-NAT-STAT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    ciscoMgmt
        FROM CISCO-SMI;

ciscoCat6kNatStatMIB MODULE-IDENTITY
    LAST-UPDATED "201906110000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
                "Cisco Systems
                Customer Service
                Postal: 170 W Tasman Drive
                San Jose, CA  95134
                USA
                Tel: +1 800 553-NETS

                E-mail: cs-cat6000@cisco.com"

DESCRIPTION 
    "The cisco catalyst 6000 Nat stat mib provides information about NAT
     platform specific statistics in the system"
  
REVISION "201906110000Z"
DESCRIPTION
    "Inital version of ciscoNatMib"
    
    ::= { ciscoMgmt 861 }

ciscoCat6kNatStatMIBObjects OBJECT IDENTIFIER
    ::= { ciscoCat6kNatStatMIB 1}

ciscoCat6kNatStatus OBJECT IDENTIFIER
    ::= { ciscoCat6kNatStatMIBObjects 2 }
    
--Conformances
ciscoCat6kNatStatMIBConformance OBJECT IDENTIFIER
    ::= {ciscoCat6kNatStatMIB 2}
    
ciscoCat6kNatStatMIBCompliances OBJECT IDENTIFIER
    ::= {ciscoCat6kNatStatMIBConformance 1}

ciscoCat6kNatStatMIBGroups OBJECT IDENTIFIER
    ::= {ciscoCat6kNatStatMIBConformance 2}
    
--Units of Conformances
ciscoCat6kNatStatGroup OBJECT-GROUP
    OBJECTS     {
                    ciscoCat6kNatType,
                    ciscoCat6kNatNetFlowType,
                    ciscoCat6kNatFlowRecord,
                    ciscoCat6kNatDynamicEntryUtilization,
                    ciscoCat6kNatStaticEntryUtilization,
                    ciscoCat6kNatOtherEntryUtilization,
                    ciscoCat6kNatTotalEntryCount,
                    ciscoCat6kNatResourceUtilization
                }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing
        status of NAT statistics"
    ::= {ciscoCat6kNatStatMIBGroups 1}

ciscoCat6kNatStatMIBComplianceVer1 MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for
        CISCO-CAT6k-NAT-STAT-MIB"
    MODULE      -- This module
    MANDATORY-GROUPS {
                     ciscoCat6kNatStatGroup
                     }
    ::= {ciscoCat6kNatStatMIBCompliances 1}
   
NatType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Type of NAT"
    SYNTAX          INTEGER {
                    static(1),
                    dynamic(2),
                    mixed(3),
                    other(4)
                    }
NetFlowType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Type of Netflow"
    SYNTAX      INTEGER {
                layer3(1),
                mixed(2)
                }
NatBool ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Boolean type in this mib"
    SYNTAX     INTEGER {
                disabled(0),
                enabled(1)
                }


ciscoCat6kNatType OBJECT-TYPE
    SYNTAX NatType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
    "NAT type can be Static, Dynamic,  Mixed and other. Static 
	should be displayed when static rules are hit. 
    Dynamic should be displayed when dynamic rules are hit. 
    If traffic hits rmap/pat rules, it should display as Other."   
    ::= { ciscoCat6kNatStatus 1 }

ciscoCat6kNatNetFlowType OBJECT-TYPE
    SYNTAX NetFlowType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Netflow type will be Layer-3 or Mixed. 
    If the rules are hit based only on Layer 3 information, 
    it should display as Layer-3.For static/dynamic nat it is L3,rmap
    and Pat uses L4 info and it is considered as Mixed."

    ::= { ciscoCat6kNatStatus 2 }

ciscoCat6kNatFlowRecord OBJECT-TYPE
    SYNTAX NatBool
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object shows whether ip nat create flow config is 
        enabled or not.
        By default it will be in enabled state only."

    ::= { ciscoCat6kNatStatus 3 }


ciscoCat6kNatDynamicEntryUtilization OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object gives total utilization of dynamic NAT entries 
        present in the system."

    ::= { ciscoCat6kNatStatus 4 }

ciscoCat6kNatStaticEntryUtilization OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION 
        "This object gives total utilization of static NAT entries 
        present in the system."

    ::= { ciscoCat6kNatStatus 5 }

ciscoCat6kNatOtherEntryUtilization OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object gives total utilization of other 
        NAT (PAT,RMAP,Etc.)
        entries present in the system."

    ::= { ciscoCat6kNatStatus 6 }

ciscoCat6kNatTotalEntryCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object gives consolidated count of static as well as 
        dynamic entries present in the system."

    ::= { ciscoCat6kNatStatus 7 }

ciscoCat6kNatResourceUtilization OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Total system resource used by the system"

::= { ciscoCat6kNatStatus 8 }

END