-- ***************************************************************** -- CISCO-ALARM-MIB.my -- Alarm Mgr MIB -- -- Aug 2019 Vickey Kumar (vickkuma), Karthik R (krajanga) -- -- Copyright (c) 2019-2021 by Cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-ALARM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter64, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, DisplayString, TimeStamp FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB EntPhysicalIndexOrZero FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoAlarmMIB MODULE-IDENTITY LAST-UPDATED "202008310000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-@cisco.com" DESCRIPTION "Added hwCem(68) to existing CoiAlarmObjectTypeClass object." REVISION "202105170000Z" DESCRIPTION "The MIB module describes a generic solution to model alarms and to store the current list of active alarms." REVISION "201908280000Z" DESCRIPTION "MIB changes for trap" REVISION "201908280000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 869 } -- ************************************************************** -- Cisco Alarm-mib generic textual conventions -- ************************************************************** CoiAlarmObjectTypeClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is the TC used to find out to which coiObjectTypeClass an alarm belongs to" SYNTAX INTEGER { unknown(1), hwMemorySbe(2), hwMemoryMbe(3), hwMemoryParity(4), hwFreeze(5), hwFlopError(6), hwInternal(7), hwTimeout(8), hwHang(9), hwError(10), hwLinkCrc(11), hwCodeViolation(12), hwLinkDisparity(13), hwEnvmonSensorAlarm(14), hwEnvmonPemAlarm(15), hwEnvmonFanAlarm(16), swMemoryFault(17), swBusError(18), swProcessCrash(19), swMallocError(20), swFoobar(21), swConnectFail(22), swProcessRestart(23), swProcessFailure(24), swMandatoryProcessFailure(25), swServiceRestart(26), swServiceFailure(27), swPmHeartbeat(28), swHostosHeartbeat(29), swCccWdog(30), hwConfigErr(31), hwGenericErr(32), hwIndirectErr(33), hwOorThreshErr(34), hwUnexpectedErr(35), hwBoardReload(36), hwSliceReload(37), hwMiscErr(38), hwRxResourceErr(39), hwTxResourceErr(40), hwLinkStatChange(41), hwEtherBridge(42), swInitErr(43), swMiscErr(44), hwEnvmonEcuAlarm(45), hwEnvmonPwrFilterAlarm(46), hwSonet(47), hwG709(48), hwEthernet(49), hwOptics(50), hwGfp(51), hwSdhController(52), swFsdbaggPlane(53), hwOts(54), swMacsecMka(55), swSmartLicErr(56), swProvisionErr(57), hwSyncec(58), hwPci(59), swWdDiskUsage(60), swCfgmgr(61), swG709Otnsec(62), hwCpri(63), hwImfpga(64), swFsdbaggConnMismatch(65), hwFibreChannel(66), hwE1(67), hwCem(68) } -- ************************************************************** -- Textual Conventions definition will be defined before this line ciscoAlarmMIBNotifs OBJECT IDENTIFIER ::= { ciscoAlarmMIB 0 } ciscoAlarmMIBObjects OBJECT IDENTIFIER ::= { ciscoAlarmMIB 1 } coiAlarmActive OBJECT IDENTIFIER ::= { ciscoAlarmMIBObjects 1 } coiAlarmActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF CoiAlarmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Active Alarms entries." ::= { coiAlarmActive 1 } coiAlarmActiveEntry OBJECT-TYPE SYNTAX CoiAlarmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry containing active alarm attributes.Entries appear in the alarm table when alarms are raised. They are removed when the alarm is cleared." INDEX { coiAlarmIndex, coiAlarmObjectIfIndex, coiAlarmObjectEntPhyIndex, coiAlarmType } ::= { coiAlarmActiveTable 1 } CoiAlarmActiveEntry ::= SEQUENCE { coiAlarmIndex Integer32, coiAlarmObjectIfIndex InterfaceIndexOrZero, coiAlarmObjectEntPhyIndex EntPhysicalIndexOrZero, coiAlarmObjectName DisplayString, coiAlarmObjectType CoiAlarmObjectTypeClass, coiAlarmType DisplayString, coiAlarmTimeStamp Counter64, coiAlarmSeverity INTEGER, coiAlarmStatus INTEGER, coiAlarmServiceAffecting INTEGER, coiAlarmDescription DisplayString } coiAlarmIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "AlarmIndex is hashIndex generated from combination of AID and EID. AlarmIndex will be set only when AlarmObjectIfIndex and AlarmObjectEntPhyIndex is not available, else default value is set to 0" ::= { coiAlarmActiveEntry 1 } coiAlarmObjectIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "if the alarm is interface related, this is the index of the interface in the interface table, else default 0 will be set." ::= { coiAlarmActiveEntry 2 } coiAlarmObjectEntPhyIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "if the alarm is raised from Physical Entity like LC, this field will be set to Physical Index of that Physical Entity, else default 0 will be set." ::= { coiAlarmActiveEntry 3 } coiAlarmObjectName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User-visible name which uniquely identifies an object in the system." ::= { coiAlarmActiveEntry 4 } coiAlarmObjectType OBJECT-TYPE SYNTAX CoiAlarmObjectTypeClass MAX-ACCESS read-only STATUS current DESCRIPTION "indicates the type of the entity which raised this alarm. (refer coiAlarmObjectTypeClass)" ::= { coiAlarmActiveEntry 5 } coiAlarmType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Unique ID to identify an Alarm type in the system. Also, referred to in different systems as condition type, alarm identifier, or alarm mnemonic." ::= { coiAlarmActiveEntry 6 } coiAlarmTimeStamp OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the alarm was raised by the system. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2))." ::= { coiAlarmActiveEntry 7 } coiAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { unknown(0), notReported(1), notAlarmed(2), minor(3), major(4), critical(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity level indicating the criticality and impact of the alarm." ::= { coiAlarmActiveEntry 8 } coiAlarmStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), set(1), clear(2), suppress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm status represents if an alarm is currently raised or cleared." ::= { coiAlarmActiveEntry 9 } coiAlarmServiceAffecting OBJECT-TYPE SYNTAX INTEGER { unknown(0), notServiceAffecting(1), serviceAffecting(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm service affecting flag specifies if an alarm is Service Affecting (SA) or Non-Service Affecting (NSA)" ::= { coiAlarmActiveEntry 10 } coiAlarmDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm Description used to inform operators about the alarm. This contains enough information for an operator to be able to understand the problem." ::= { coiAlarmActiveEntry 11 } --definitions realted to alarm traps coiAlarmStatusChange NOTIFICATION-TYPE OBJECTS { coiAlarmIndex, coiAlarmObjectIfIndex, coiAlarmObjectEntPhyIndex, coiAlarmObjectName, coiAlarmType, coiAlarmSeverity, coiAlarmStatus, coiAlarmDescription } STATUS current DESCRIPTION "This Notification is generated when ever an alarm is updated in the alarm mib. varbind coiAlarmIndex,coiAlarmObjectIFINdex and coiAlarmObjectEntPhyIndex indicates the index of the alarm i.e fow sw, interface and hw alarms will have the respective index varbind coiObjectName indicates the alarms name. varbind coiAlarmSeverity indicates the severity of the alarm. varbind coiAlarmStatus indicates the status of the alarm" ::= { ciscoAlarmMIBNotifs 1} --trap realted definations end here END -- %DNP% MLC -Compiled MLC