-- This file was included in WWP MIB release 04-10-01-0027 -- -- WWP-LEOS-SSH-MIB.my -- WWP-LEOS-SSH-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC InetAddressType,InetAddress FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF wwpModulesLeos FROM WWP-SMI; wwpLeosSSHMIB MODULE-IDENTITY LAST-UPDATED "201204100000Z" ORGANIZATION "Ciena, Inc" CONTACT-INFO " Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "The MIB module defines the managed objects for the SSH available on the WWP specific products." REVISION "201204100000Z" DESCRIPTION "Add new OIDs wwpLeosSSHServerClientInetAddrType and wwpLeosSSHServerClientInetAddr to support IP protocol version independent Inet addressing." REVISION "201106150000Z" DESCRIPTION "Updated the Max limits for objects wwpLeosSSHServerMaxLimitedUsers and wwpLeosSSHServerMaxSuperUsers. Added new object wwpLeosSSHServerMaxAdminUsers." REVISION "200604181700Z" DESCRIPTION "Initial creation." ::= { wwpModulesLeos 34 } -- -- Node definitions -- wwpLeosSSHMIBObjects OBJECT IDENTIFIER ::= { wwpLeosSSHMIB 1 } -- -- wwpLeosSSHServerGlobal OBJECT IDENTIFIER ::= { wwpLeosSSHMIBObjects 1 } wwpLeosSSHServerClient OBJECT IDENTIFIER ::= { wwpLeosSSHMIBObjects 2 } wwpLeosSSHServerListenerPort OBJECT IDENTIFIER ::= { wwpLeosSSHMIBObjects 3 } -- Notifications wwpLeosSSHMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosSSHMIB 2 } wwpLeosSSHMIBNotifications OBJECT IDENTIFIER ::= { wwpLeosSSHMIBNotificationPrefix 0 } -- Conformance information wwpLeosSSHMIBConformance OBJECT IDENTIFIER ::= { wwpLeosSSHMIB 3 } wwpLeosSSHMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosSSHMIBConformance 1 } wwpLeosSSHMIBGroups OBJECT IDENTIFIER ::= { wwpLeosSSHMIBConformance 2 } -- -- The SSH Global Attributes -- wwpLeosSSHServerAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the admin global state of SSH server." ::= { wwpLeosSSHServerGlobal 1 } wwpLeosSSHServerOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the operational state of SSH server." ::= { wwpLeosSSHServerGlobal 2 } wwpLeosSSHServerAuthenticationRetries OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the number of retries SSH server should allow before rejecting the client request." DEFVAL {3} ::= { wwpLeosSSHServerGlobal 3 } wwpLeosSSHServerMaxClients OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the maximum number of clients session SSH server accepts at any given time. At any given time current number of limited + super users will never exceed the value indicated by wwpLeosSSHServerMaxClients." ::= { wwpLeosSSHServerGlobal 4 } wwpLeosSSHServerKeyGenerateSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object will trigger the device to generate key. If user optionally wants the public key to be TFTP to some address then wwpLeosSSHServerTftpServer must be set to valid TFTP server." ::= { wwpLeosSSHServerGlobal 5 } wwpLeosSSHServerKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object specifies the key that exist on the device." ::= { wwpLeosSSHServerGlobal 6 } wwpLeosSSHServerKeyStatus OBJECT-TYPE SYNTAX INTEGER { keyReady(1), keyGenerating(2), keyDoesnotExist(3), keyGenerationFailed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This mib object returns the key status on the device." ::= { wwpLeosSSHServerGlobal 7 } wwpLeosSSHServerTftpServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the TFTP server where public key would optionally be transmitted to. Once this object is set device will always use this IP address whenever wwpLeosSSHServerKeyGenerateSet is set to true. User must set this to 0 if user doesnot want the device to TFTP the public key. If key generation and TFTP server is not configured through SNMP then this object will always show 0.0.0.0." ::= { wwpLeosSSHServerGlobal 8 } wwpLeosSSHServerMaxLimitedUsers OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the maximum number of limited users SSH server accepts at any given time." DEFVAL {4} ::= { wwpLeosSSHServerGlobal 9 } wwpLeosSSHServerMaxSuperUsers OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the maximum number of super users SSH server accepts at any given time." DEFVAL {5} ::= { wwpLeosSSHServerGlobal 10 } wwpLeosSSHServerMaxAdminUsers OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the maximum number of admin users SSH server accepts at any given time." DEFVAL {4} ::= { wwpLeosSSHServerGlobal 11 } -- -- SSH Clients table -- wwpLeosSSHServerClientTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosSSHServerClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the SSH server clients configured. To create entry in this table Use SNMP multiple variable binding option. wwpLeosSSHServerClientIpAddr must be set to some valid IP. wwpLeosSSHServerClientStatus must be set to createAndGo. To delete entry in this table wwpLeosSSHServerClientStatus must be set to destroy." ::= { wwpLeosSSHServerClient 1 } wwpLeosSSHServerClientEntry OBJECT-TYPE SYNTAX WwpLeosSSHServerClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the wwpLeosSSHServerClientTable." INDEX { wwpLeosSSHServerClientIndex } ::= { wwpLeosSSHServerClientTable 1 } WwpLeosSSHServerClientEntry ::= SEQUENCE { wwpLeosSSHServerClientIndex Integer32, wwpLeosSSHServerClientIpAddr IpAddress, wwpLeosSSHServerClientStatus RowStatus, wwpLeosSSHServerClientInetAddrType InetAddressType, wwpLeosSSHServerClientInetAddr InetAddress } wwpLeosSSHServerClientIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object indicates the unique index in the table." ::= { wwpLeosSSHServerClientEntry 1 } wwpLeosSSHServerClientIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the IP address of the client that is allowed to connect using SSH. This object cannot be modified once entry is created with some IP. Returns 0.0.0.0 when not representing IPv4 address." ::= { wwpLeosSSHServerClientEntry 2 } wwpLeosSSHServerClientStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to 'destroy'." ::= { wwpLeosSSHServerClientEntry 3 } wwpLeosSSHServerClientInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the IP address of the client that is allowed to connect using SSH. This object cannot be modified once entry is created with some IP. Used in conjunction with wwpLeosSSHServerClientInetAddr. When value is : ipv4 : wwpLeosSSHServerClientInetAddr should be compliant with InetAddressIPv4 ipv6 : wwpLeosSSHServerClientInetAddr should be compliant with InetAddressIPv6." ::= { wwpLeosSSHServerClientEntry 4 } wwpLeosSSHServerClientInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the IP address of the client that is allowed to connect using SSH. This object cannot be modified once entry is created with some IP. This OID should be used in conunction with wwpLeosSSHServerClientInetAddrType." ::= { wwpLeosSSHServerClientEntry 5 } -- -- SSH Server Listener Port Settings -- wwpLeosSSHServerListenerPortId OBJECT-TYPE SYNTAX Unsigned32 (22..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the port number on which SSH server is allowed to listen for clients." ::= { wwpLeosSSHServerListenerPort 1 } -- -- module compliance -- wwpLeosSSHServerClientCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of WWP-LEOS-SSH-MIB MIB." MODULE GROUP wwpLeosSSHServerClientIPv6Group DESCRIPTION "This group is mandatory when IPv6 addresses are supported." OBJECT wwpLeosSSHServerClientInetAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is only required to support IPv4 and IPv6 addresses without zone indices." ::= { wwpLeosSSHMIBCompliances 1 } wwpLeosSSHServerClientIPv6Group OBJECT-GROUP OBJECTS { wwpLeosSSHServerClientInetAddrType, wwpLeosSSHServerClientInetAddr } STATUS current DESCRIPTION "SSH server client objects for IPv6 address." ::= { wwpLeosSSHMIBGroups 1 } END