-- This file was included in WWP MIB release 04-10-01-0027 WWP-LEOS-MPLS-OAM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, IpAddress, Unsigned32 FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, RowStatus, DisplayString FROM SNMPv2-TC -- RFC2579 wwpModulesLeos FROM WWP-SMI; wwpLeosMPLSOamMIB MODULE-IDENTITY LAST-UPDATED "200605260000Z" -- 26 September 2006 ORGANIZATION "IETF Distributed Management Working Group" CONTACT-INFO "Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "The MPLS OAM MIB provides the capability of controlling the use of the wwpLeosMplsOAMLspPing and wwpLeosMplsOAMLspTraceRt function at a remote host." REVISION "200605260000Z" -- 26 May 2006 DESCRIPTION "Initial version" ::= { wwpModulesLeos 36 } -- Textual Conventions OperationResponseStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to report the result of an operation: responseReceived(1) - Operation completes successfully. unknown(2) - Operation failed due to unknown error. requestTimedOut(4) - Operation failed to receive a valid reply within the time limit imposed on it. unknownLsp(5) - LSP with the specified name does not exist. maxConcurrentLimitReached(6) - The maximum number of concurrent active operations would have been exceeded if the corresponding operation was allowed." SYNTAX INTEGER { responseReceived(1), unknown(2), requestTimedOut(4), unknownLsp(5), maxConcurrentLimitReached(6) } LspPingReturnCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to report the Return Code in the Echo Reply packet: noReturnCode(0) - No return Code malformedEchoRequest(1) - Malformed Echo Request received oneOrMoreTlvsNotUnderstood(2) - egressForFec(3) - Replying router is egress for the FEC at stack Depth indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode noMappingForFec(4) - Replying router has no mapping for the FEC at stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode downstreamMappingMismatch(5) upstreamInterfaceIndexUnknown(6) labelSwitchedFec(8) - Label switched at stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode labelSwitchedNoForwardingFec(9) - Label switched but no MPLS forwarding at stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode wrongLabel(10) - Mapping for this FEC is not the given label at stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode noLabel(11) - No label entry at stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode unknownFec(12) - Protocol not associated with interface at FEC stack depth as indicated in wwpLeosMPLSOamLspPingProbeHistoryRetSubCode." SYNTAX INTEGER { noReturnCode(0), malformedEchoRequest(1), oneOrMoreTlvsNotUnderstood(2), egressForFec(3), noMappingForFec(4), downstreamMappingMismatch(5), upstreamInterfaceIndexUnknown(6), labelSwitchedFec(8), labelSwitchedNoForwardingFec(9), wrongLabel(10), noLabel(11), unknownFec(12) } LspType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to indicate LSP Type" SYNTAX INTEGER { rsvpTeTunnel(1) } -- Top level structure of the MIB wwpLeosMPLSOamObjects OBJECT IDENTIFIER ::= { wwpLeosMPLSOamMIB 1 } wwpLeosMPLSOamNotifications OBJECT IDENTIFIER ::= { wwpLeosMPLSOamMIB 2 } wwpLeosMPLSOamConformance OBJECT IDENTIFIER ::= { wwpLeosMPLSOamMIB 3 } -- Simple Object Definitions wwpLeosMPLSOAMLspPingMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of Lsp Ping that are allowed at any given time." ::= { wwpLeosMPLSOamObjects 1 } wwpLeosMPLSOAMLspTraceRtMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of Lsp Trace Routes that are allowed at any given time." ::= { wwpLeosMPLSOamObjects 2 } -- LspPing Control Table wwpLeosMPLSOamLspPingCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosMPLSOamLspPingCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the wwpLeosMPLSOamLspPing Control Table for providing, via SNMP, the capability of performing wwpLeosMPLSOamLspPing operations at a remote host. The results of these operations are stored in the wwpLeosMPLSOamLspPingResultsTable. When creating any entry in the table wwpLeosMPLSOamLspPingCtlLspName must be operationally enabled else error will be returned." ::= { wwpLeosMPLSOamObjects 3 } wwpLeosMPLSOamLspPingCtlEntry OBJECT-TYPE SYNTAX WwpLeosMPLSOamLspPingCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the wwpLeosMPLSOamLspPingCtlTable." INDEX { wwpLeosMPLSOamLspPingCtlIndex } ::= { wwpLeosMPLSOamLspPingCtlTable 1 } WwpLeosMPLSOamLspPingCtlEntry ::= SEQUENCE { wwpLeosMPLSOamLspPingCtlIndex Integer32, wwpLeosMPLSOamLspPingCtlLspType LspType, wwpLeosMPLSOamLspPingCtlLspName DisplayString, wwpLeosMPLSOamLspPingCtlPktSize Unsigned32, wwpLeosMPLSOamLspPingCtlTimeOut Unsigned32, wwpLeosMPLSOamLspPingCtlCount Unsigned32, wwpLeosMPLSOamLspPingCtlAdminState INTEGER, wwpLeosMPLSOamLspPingCtlTtl Integer32, wwpLeosMPLSOamLspPingCtlRowStatus RowStatus } wwpLeosMPLSOamLspPingCtlIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "This mib object is used as index in the table." ::= { wwpLeosMPLSOamLspPingCtlEntry 1 } wwpLeosMPLSOamLspPingCtlLspType OBJECT-TYPE SYNTAX LspType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of LSP to be used at a remote host for performing a wwpLeosMPLSOamLspPing operation." DEFVAL { rsvpTeTunnel } ::= { wwpLeosMPLSOamLspPingCtlEntry 3 } wwpLeosMPLSOamLspPingCtlLspName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the LSP Name for performing a wwpLeosMPLSOamLspPing operation. A value for this object MUST be set prior to transitioning its corresponding wwpLeosMPLSOamLspPingCtlEntry to active(1) via wwpLeosMPLSOamLspPingCtlRowStatus." ::= { wwpLeosMPLSOamLspPingCtlEntry 4 } wwpLeosMPLSOamLspPingCtlPktSize OBJECT-TYPE SYNTAX Unsigned32 (96..1464) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the size of the data portion to be transmitted in a wwpLeosMPLSOamLspPing operation in octets. A wwpLeosMPLSOamLspPing request is usually an ICMP message encoded into an IP packet. An IP packet has a maximum size of 65535 octets. Subtracting the size of the ICMP or UDP header (both 8 octets) and the size of the IP header (20 octets) yields a maximum size of 65507 octets." DEFVAL { 96 } ::= { wwpLeosMPLSOamLspPingCtlEntry 5 } wwpLeosMPLSOamLspPingCtlTimeOut OBJECT-TYPE SYNTAX Unsigned32 (1000..10000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the time-out value, in seconds, for a remote wwpLeosMPLSOamLspPing operation." DEFVAL { 1000 } ::= { wwpLeosMPLSOamLspPingCtlEntry 6 } wwpLeosMPLSOamLspPingCtlCount OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of times to perform a wwpLeosMPLSOamLspPing operation at a remote host." DEFVAL { 1 } ::= { wwpLeosMPLSOamLspPingCtlEntry 7 } wwpLeosMPLSOamLspPingCtlAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- stop sending ping enabled(2) -- start sending ping } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'true' will stop sending the ping." DEFVAL { enabled } ::= { wwpLeosMPLSOamLspPingCtlEntry 8 } wwpLeosMPLSOamLspPingCtlTtl OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the TTL to be used in the MPLS label header." ::= { wwpLeosMPLSOamLspPingCtlEntry 9 } wwpLeosMPLSOamLspPingCtlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the wwpLeosMPLSOamLspPingCtlTable. Deletion of an entry in this table results in all corresponding (same wwpLeosMPLSOamLspPingCtlIndex index values) wwpLeosMPLSOamLspPingResultsTable." ::= { wwpLeosMPLSOamLspPingCtlEntry 10 } -- MPLSOamLspPing Results Table wwpLeosMPLSOamLspPingResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosMPLSOamLspPingResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the LspPing Results Table for providing the capability of performing wwpLeosMPLSOamLspPing operations at a remote host. The results of these operations are stored in the wwpLeosMPLSOamLspPingResultsTable and the wwpLeosMPLSOamLspPingPastProbeTable. An entry is added to the wwpLeosMPLSOamLspPingResultsTable when an wwpLeosMPLSOamLspPingCtlEntry is started by successful transition of its wwpLeosMPLSOamLspPingCtlAdminStatus object to enabled(1). An entry is removed from the wwpLeosMPLSOamLspPingResultsTable when its corresponding wwpLeosMPLSOamLspPingCtlEntry is deleted." ::= { wwpLeosMPLSOamObjects 4 } wwpLeosMPLSOamLspPingResultsEntry OBJECT-TYPE SYNTAX WwpLeosMPLSOamLspPingResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the wwpLeosMPLSOamLspPingResultsTable. The wwpLeosMPLSOamLspPingResultsTable has the same indexing as the wwpLeosMPLSOamLspPingCtlTable in order for a wwpLeosMPLSOamLspPingResultsEntry to correspond to the wwpLeosMPLSOamLspPingCtlEntry that caused it to be created." INDEX { wwpLeosMPLSOamLspPingCtlIndex } ::= { wwpLeosMPLSOamLspPingResultsTable 1 } WwpLeosMPLSOamLspPingResultsEntry ::= SEQUENCE { wwpLeosMPLSOamLspPingResultsOperStatus INTEGER, wwpLeosMPLSOamLspPingResultsStatus INTEGER, wwpLeosMPLSOamLspPingResultsLspType LspType, wwpLeosMPLSOamLspPingResultsLspName OCTET STRING, wwpLeosMPLSOamLspPingResultsMinRtt Unsigned32, wwpLeosMPLSOamLspPingResultsMaxRtt Unsigned32, wwpLeosMPLSOamLspPingResultsAverageRtt Unsigned32, wwpLeosMPLSOamLspPingResultsProbesSent Unsigned32, wwpLeosMPLSOamLspPingResultsProbeResponses Unsigned32 } wwpLeosMPLSOamLspPingResultsOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- test is in progress disabled(2) -- test has stopped } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the operational state of a wwpLeosMPLSOamLspPingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped." ::= { wwpLeosMPLSOamLspPingResultsEntry 1 } wwpLeosMPLSOamLspPingResultsStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), success(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the final result of the wwpLeosMPLSOamLspPingCtlEntry." ::= { wwpLeosMPLSOamLspPingResultsEntry 2 } wwpLeosMPLSOamLspPingResultsLspType OBJECT-TYPE SYNTAX LspType MAX-ACCESS read-only STATUS current DESCRIPTION "This objects indicates the type of LSP stored in the corresponding wwpLeosMPLSOamLspPingResultsLspName object." ::= { wwpLeosMPLSOamLspPingResultsEntry 3 } wwpLeosMPLSOamLspPingResultsLspName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This objects reports the LSP Name." ::= { wwpLeosMPLSOamLspPingResultsEntry 4 } wwpLeosMPLSOamLspPingResultsMinRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum wwpLeosMPLSOamLspPing round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { wwpLeosMPLSOamLspPingResultsEntry 5 } wwpLeosMPLSOamLspPingResultsMaxRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wwpLeosMPLSOamLspPing round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received." ::= { wwpLeosMPLSOamLspPingResultsEntry 6 } wwpLeosMPLSOamLspPingResultsAverageRtt OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The current average wwpLeosMPLSOamLspPing round-trip-time (RTT)." ::= { wwpLeosMPLSOamLspPingResultsEntry 7 } wwpLeosMPLSOamLspPingResultsProbesSent OBJECT-TYPE SYNTAX Unsigned32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reflects the number of probes sent for the corresponding wwpLeosMPLSOamLspPingCtlEntry and wwpLeosMPLSOamLspPingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent." ::= { wwpLeosMPLSOamLspPingResultsEntry 8 } wwpLeosMPLSOamLspPingResultsProbeResponses OBJECT-TYPE SYNTAX Unsigned32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responses received for the corresponding wwpLeosMPLSOamLspPingCtlEntry and wwpLeosMPLSOamLspPingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received." ::= { wwpLeosMPLSOamLspPingResultsEntry 9 } -- -- Traceroute Control Table -- wwpLeosMPLSOamLspTraceRouteCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosMPLSOamLspTraceRouteCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host. The results of traceroute operations can be stored in the wwpLeosMPLSOamLspTraceRouteResultsTable, wwpLeosMPLSOamLspTraceRouteHopsTable." ::= { wwpLeosMPLSOamObjects 5 } wwpLeosMPLSOamLspTraceRouteCtlEntry OBJECT-TYPE SYNTAX WwpLeosMPLSOamLspTraceRouteCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the wwpLeosMPLSOamLspTraceRouteCtlTable." INDEX { wwpLeosMPLSOamLspTraceRouteCtlIndex } ::= { wwpLeosMPLSOamLspTraceRouteCtlTable 1 } WwpLeosMPLSOamLspTraceRouteCtlEntry ::= SEQUENCE { wwpLeosMPLSOamLspTraceRouteCtlIndex Integer32, wwpLeosMPLSOamLspTraceRouteCtlLspType LspType, wwpLeosMPLSOamLspTraceRouteCtlLspName DisplayString, wwpLeosMPLSOamLspTraceRouteCtlTimeOut Unsigned32, wwpLeosMPLSOamLspTraceRouteCtlMaxTtl Unsigned32, wwpLeosMPLSOamLspTraceRouteCtlAdminStatus INTEGER, wwpLeosMPLSOamLspTraceRouteCtlRowStatus RowStatus } wwpLeosMPLSOamLspTraceRouteCtlIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "This mib object is used as index in the table." ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 1 } wwpLeosMPLSOamLspTraceRouteCtlLspType OBJECT-TYPE SYNTAX LspType MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of LSP." DEFVAL { rsvpTeTunnel } ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 2 } wwpLeosMPLSOamLspTraceRouteCtlLspName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the LSP Name. A value for this object MUST be set prior to transitioning its corresponding wwpLeosMPLSOamLspTraceRouteCtlEntry to active(1) via wwpLeosMPLSOamLspTraceRouteCtlRowStatus." ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 3 } wwpLeosMPLSOamLspTraceRouteCtlTimeOut OBJECT-TYPE SYNTAX Unsigned32 (1000..10000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the time-out value, in seconds, for a traceroute request." ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 4 } wwpLeosMPLSOamLspTraceRouteCtlMaxTtl OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "time-to-live value" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum time-to-live value." DEFVAL { 30 } ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 5 } wwpLeosMPLSOamLspTraceRouteCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- operation should be started disabled(2) -- operation should be stopped } MAX-ACCESS read-create STATUS current DESCRIPTION "Reflects the desired state that an wwpLeosMPLSOamLspTraceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this wwpLeosMPLSOamLspTraceRouteCtlEntry. disabled(2) - Deactivate the test as defined by this wwpLeosMPLSOamLspTraceRouteCtlEntry. Refer to the corresponding wwpLeosMPLSOamLspTraceRouteResultsOperStatus to determine the operational state of the test defined by this entry." DEFVAL { disabled } ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 6 } wwpLeosMPLSOamLspTraceRouteCtlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the wwpLeosMPLSOamLspTraceRouteCtlTable. Deletion of an entry in this table results in all corresponding wwpLeosMPLSOamLspTraceRouteResultsTable and wwpLeosMPLSOamLspTraceRouteHopsTable entries being deleted." ::= { wwpLeosMPLSOamLspTraceRouteCtlEntry 7 } -- -- MPLS Trace Route Result Table -- wwpLeosMPLSOamLspTraceRouteResultsTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosMPLSOamLspTraceRouteResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations Traceroute Results Table for keeping track of the status of a wwpLeosMPLSOamLspTraceRouteCtlEntry. An entry is added to the wwpLeosMPLSOamLspTraceRouteResultsTable when an wwpLeosMPLSOamLspTraceRouteCtlEntry is started by successful transition of its wwpLeosMPLSOamLspTraceRouteCtlAdminStatus object to enabled(1). An entry is removed from the wwpLeosMPLSOamLspTraceRouteResultsTable when its corresponding wwpLeosMPLSOamLspTraceRouteCtlEntry is deleted." ::= { wwpLeosMPLSOamObjects 6 } wwpLeosMPLSOamLspTraceRouteResultsEntry OBJECT-TYPE SYNTAX WwpLeosMPLSOamLspTraceRouteResultsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the wwpLeosMPLSOamLspTraceRouteResultsTable." INDEX { wwpLeosMPLSOamLspTraceRouteCtlIndex } ::= { wwpLeosMPLSOamLspTraceRouteResultsTable 1 } WwpLeosMPLSOamLspTraceRouteResultsEntry ::= SEQUENCE { wwpLeosMPLSOamLspTraceRouteResultsOperStatus INTEGER, wwpLeosMPLSOamLspTraceRouteResultsStatus INTEGER, wwpLeosMPLSOamLspTraceRouteResultsCurHopCount Gauge32 } wwpLeosMPLSOamLspTraceRouteResultsOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), -- test is in progress disabled(2) -- test has stopped } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the operational state of an wwpLeosMPLSOamLspTraceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped." ::= { wwpLeosMPLSOamLspTraceRouteResultsEntry 1 } wwpLeosMPLSOamLspTraceRouteResultsStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), success(2), fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the final status of an wwpLeosMPLSOamLspTraceRouteCtlEntry." ::= { wwpLeosMPLSOamLspTraceRouteResultsEntry 2 } wwpLeosMPLSOamLspTraceRouteResultsCurHopCount OBJECT-TYPE SYNTAX Gauge32 UNITS "hops" MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by wwpLeosMPLSOamLspTraceRouteCtlMaxTtl." ::= { wwpLeosMPLSOamLspTraceRouteResultsEntry 3 } -- -- Trace Route Hop Table -- wwpLeosMPLSOamLspTraceRouteHopTable OBJECT-TYPE SYNTAX SEQUENCE OF WwpLeosMPLSOamLspTraceRouteHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation. An implementation of this MIB will remove the oldest entry in the wwpLeosMPLSOamTraceRouteProbeHistoryTable to allow the addition of an new entry once the number of rows in the wwpLeosMPLSOamTraceRouteProbeHistoryTable reaches the value specified by wwpLeosMPLSOamTraceRouteCtlMaxRows." ::= { wwpLeosMPLSOamObjects 7 } wwpLeosMPLSOamLspTraceRouteHopEntry OBJECT-TYPE SYNTAX WwpLeosMPLSOamLspTraceRouteHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines a table for storing the results of a traceroute operation. Entries in this table are limited by the value of the corresponding wwpLeosMPLSOamLspTraceRouteCtlMaxRows object. The first two index elements identify the wwpLeosMPLSOamLspTraceRouteCtlEntry that a wwpLeosMPLSOamLspTraceRouteProbeHistoryEntry belongs to. The third index element selects a single traceroute operation result. The fourth and fifth indexes select the hop and the probe for a particular traceroute operation." INDEX { wwpLeosMPLSOamLspTraceRouteCtlIndex, wwpLeosMPLSOamLspTraceRouteHopIndex } ::= { wwpLeosMPLSOamLspTraceRouteHopTable 1 } WwpLeosMPLSOamLspTraceRouteHopEntry ::= SEQUENCE { wwpLeosMPLSOamLspTraceRouteHopIndex Unsigned32, wwpLeosMPLSOamLspTraceRouteHopIp IpAddress, wwpLeosMPLSOamLspTraceRouteHopLabel Unsigned32 } wwpLeosMPLSOamLspTraceRouteHopIndex OBJECT-TYPE SYNTAX Unsigned32 (1..5) UNITS "hops" MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by wwpLeosMPLSOamLspTraceRouteCtlMaxTtl." ::= { wwpLeosMPLSOamLspTraceRouteHopEntry 1 } wwpLeosMPLSOamLspTraceRouteHopIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by wwpLeosMPLSOamLspTraceRouteCtlMaxTtl." ::= { wwpLeosMPLSOamLspTraceRouteHopEntry 2 } wwpLeosMPLSOamLspTraceRouteHopLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by wwpLeosMPLSOamLspTraceRouteCtlMaxTtl." ::= { wwpLeosMPLSOamLspTraceRouteHopEntry 3 } END