-- -- CIENA-CES-LOOP-DETECTION-MIB.my -- CIENA-CES-LOOP-DETECTION-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, DisplayString, MacAddress, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC cienaGlobalSeverity, cienaGlobalMacAddress FROM CIENA-GLOBAL-MIB CienaGlobalState FROM CIENA-TC cienaCesConfig,cienaCesStatistics, cienaCesNotifications FROM CIENA-SMI; cienaCesLoopDetectionMIB MODULE-IDENTITY LAST-UPDATED "201802020000Z" ORGANIZATION "Ciena, Inc" CONTACT-INFO "Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "Loop detection via CCMs is built over system ability to detect loop in the network" REVISION "201802020000Z" DESCRIPTION "The initial version." ::= { cienaCesConfig 50 } -- -- Node definitions -- cienaCesLoopDetectionMIBObjects OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIB 1 } cienaCesLoopDetection OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIBObjects 1 } -- Notifications cienaCesLoopDetectionMIBNotificationPrefix OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIB 2 } cienaCesLoopDetectionMIBNotifications OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIBNotificationPrefix 0 } -- Conformance information cienaCesLoopDetectionMIBConformance OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIB 3 } cienaCesLoopDetectionMIBCompliances OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIBConformance 1 } cienaCesLoopDetectionMIBGroups OBJECT IDENTIFIER ::= { cienaCesLoopDetectionMIBConformance 2 } -- -- Loop Detection Global Attributes -- cienaCesLoopDetectionAdminStatus OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies if Loop Detection is enabled or disabled on system level." ::= { cienaCesLoopDetection 1 } -- -- Loop Detection Port Parameters -- CienaCesLoopDetectionPortEntry ::= SEQUENCE { cienaCesLoopDetectionPortId Integer32, cienaCesLoopDetectionPortName DisplayString, cienaCesLoopDetectionPortAdminStatus INTEGER, cienaCesLoopDetectionPortAction INTEGER, cienaCesLoopDetectionPortRevertiveMode INTEGER, cienaCesLoopDetectionPortOperState INTEGER, cienaCesLoopDetectionPortLoopStatus INTEGER, cienaCesLoopDetectionPortLoopOccurence Counter32, cienaCesLoopDetectionHoldOffTime Integer32 } cienaCesLoopDetectionPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesLoopDetectionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Loop Detection Port Entries. " ::= { cienaCesLoopDetection 2 } cienaCesLoopDetectionPortEntry OBJECT-TYPE SYNTAX CienaCesLoopDetectionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Loop Detection Port entry in the Table." INDEX { cienaCesLoopDetectionPortId } ::= { cienaCesLoopDetectionPortTable 1 } cienaCesLoopDetectionPortId OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ID for the instance. This Port ID refers to index in loop Detection Port Entry." ::= { cienaCesLoopDetectionPortEntry 1 } cienaCesLoopDetectionPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the port. This string should indicate the physical location of the port as well." ::= { cienaCesLoopDetectionPortEntry 2 } cienaCesLoopDetectionPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the current status of Per Port of Loop Detection, i.e. whether loop-detection is enabled or disabled on port level." DEFVAL {disabled} ::= { cienaCesLoopDetectionPortEntry 3 } cienaCesLoopDetectionPortAction OBJECT-TYPE SYNTAX INTEGER { g8032(1), portshut(2), notify(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the current action configured on port if loop is detected in network. 1)g8032 - It will Block the traffic. 2)portshut - It will shut down the Port in order to completely stop the traffic. 3)notify - It will only report event and send trap." DEFVAL {notify} ::= { cienaCesLoopDetectionPortEntry 4 } cienaCesLoopDetectionPortRevertiveMode OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the ability to revert action on port after expiry of configured reversion hold-off time if no loop is present on port, it will resume traffic. If revertive mode is off, then loop-detection is required to set disabled to revoke running action from port." DEFVAL {off} ::= { cienaCesLoopDetectionPortEntry 5 } cienaCesLoopDetectionPortOperState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current operational state for the given Port, i.e. If loop-detection is enabled on both system and port level and conditioning done, it will be shown enabled." DEFVAL {disabled} ::= { cienaCesLoopDetectionPortEntry 6 } cienaCesLoopDetectionPortLoopStatus OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether loop is present on given Port, If loop is present then configured action will be applied automatically." DEFVAL {no} ::= { cienaCesLoopDetectionPortEntry 7 } cienaCesLoopDetectionPortLoopOccurence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current Loop Occurrence Count, i.e. how many times loop has been detected on per port basis" ::= { cienaCesLoopDetectionPortEntry 8 } cienaCesLoopDetectionHoldOffTime OBJECT-TYPE SYNTAX Integer32 (0..10000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the hold-off time in which the action applied on detection of loop should be applied after expiry of configured hold-off time." DEFVAL {500} ::= { cienaCesLoopDetectionPortEntry 9 } -- -- Loop Detection Port CFM Service Parameters -- cienaCesLoopDetectionPortCfmServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesLoopDetectionPortCfmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing CFM domain entry service index used for loop detection for each port." ::= { cienaCesLoopDetection 3 } cienaCesLoopDetectionPortCfmServiceEntry OBJECT-TYPE SYNTAX CienaCesLoopDetectionPortCfmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesLoopDetectionPortCfmServiceTable." INDEX { cienaCesLoopDetectionPortId, cienaCesLoopDetectionCfmServiceIndex } ::= { cienaCesLoopDetectionPortCfmServiceTable 1 } CienaCesLoopDetectionPortCfmServiceEntry ::= SEQUENCE { cienaCesLoopDetectionCfmServiceIndex Unsigned32 } cienaCesLoopDetectionCfmServiceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the CFM domain entry service index . It is also used as an index in the table." ::= { cienaCesLoopDetectionPortCfmServiceEntry 1 } -- -- Notification -- cienaCesLoopDetectionLoopFound NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesLoopDetectionCfmServiceIndex, cienaCesLoopDetectionPortName } STATUS current DESCRIPTION "A cienaCesLoopDetectionLoopFound supports the ability to notify the existence of a loop within a network." ::= { cienaCesLoopDetectionMIBNotifications 1 } cienaCesLoopDetectionLoopClear NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesLoopDetectionCfmServiceIndex, cienaCesLoopDetectionPortName } STATUS current DESCRIPTION "A cienaCesLoopDetectionLoopClear is sent whenever loop gets cleared on Port." ::= { cienaCesLoopDetectionMIBNotifications 2 } cienaCesLoopDetectionPortOperActionSet NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesLoopDetectionPortName } STATUS current DESCRIPTION "A cienaCesLoopDetectionPortOperActionSet supports the ability to notify that a loop termination action has been taken." ::= { cienaCesLoopDetectionMIBNotifications 3 } cienaCesLoopDetectionPortOperActionClear NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesLoopDetectionPortName } STATUS current DESCRIPTION "A cienaCesLoopDetectionPortOperActionClear supports the ability to notify that a loop termination action has been cleared." ::= { cienaCesLoopDetectionMIBNotifications 4 } END -- -- CIENA-CES-LOOP-DETECTION-MIB --